mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-25 04:43:33 +00:00
Code Issues Releases Activity
18a37fcdcc
freebsd-ports/UPDATING
Alexander Leidinger 207827e2a8 misc/openhab: new v3 based upon copy from openhab2 
- copy openhab2* to openhab (follow upstream)
- update to 3.0.2
- remove update script (no auto migration from v2, scrip may come back
  later, if needed)
- use openhab instead openhabvX directories (follow upstream)
- use openjdk 11 (new requirement)
- add UPDATING entry for users which may want to switch to v3
2021-06-20 11:06:12 +02:00

19242 lines
645 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file documents some of the problems you may encounter when upgrading
your ports. We try our best to minimize these disruptions, but sometimes
they are unavoidable.
You should get into the habit of checking this file for changes each time
you update your ports collection, before attempting any port upgrades.
20210620:
AFFECTS: users of misc/openhab2
AUTHOR: netchild@FreeBSD.org
The openhab v3 port has been committed. Upstream has removed the
version from the name, as such the FreeBSD port follows in all places
(start script name, directory names, ...).
Users are encuraged to migrate from misc/openhab2 to misc/openhab.
No automatic config migration is available Both versions can be
installed in parallel, but an users has to take care to not run
both at the same time on the same port.
20210617:
AFFECTS: users of graphics/mesa-libs
AUTHOR: kbowling@FreeBSD.org
Some libraries from mesa-libs are now provided by libglvnd while
others were renamed. When building outside poudriere make sure to
remove mesa-libs first in order to avoid conflict with libglvnd.
For portmaster users:
# pkg delete -f mesa-libs
# portmaster -a
For portupgrade users:
# pkg delete -f mesa-libs
# portupgrade -a
20210523:
AFFECTS: users of www/tt-rss
AUTHOR: dereks@lifeofadishwasher.com
tt-rss config.php syntax has changed. You can find detailed changes
here https://tt-rss.org/wiki/GlobalConfig or look at config.php.sample.
Expect your config.php to not work with newer www/tt-rss releases.
Due to changes in ttrssd before updating you should stop ttrssd or
otherwise kill the php process running update_daemon2.php.
20210516:
AFFECTS: users of security/bitwarden_rs
AUTHOR: mr@FreeBSD.org
bitwarden_rs has been renamed to vaultwarden upstream.
So switch to security/vaultwarden instead.
20210515:
AFFECTS: users of databases/postgresql??-server
AUTHOR: girgen@FreeBSD.org
The rc.conf parameter for the login class of the postgresql daemon has
changed name from postgresql_class to postgresql_login_class.
rc.subr(8) states that the parameter should be named ${name}_login_class.
20200512:
AFFECTS: users of sysutils/ansible*
AUTHOR: 0mp@FreeBSD.org
Ansible has been updated to 3.3.0. Please follow the porting guide
to update the rulesets:
https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_3.html
20210508:
AFFECTS: users of devel/pycharm-ce
AUTHOR: bsam@FreeBSD.org
Pycharm-ce has switched to the supported java version 11.
20210506:
AFFECTS: users of mail/postfix
AUTHOR: ohauer@FreeBSD.org
Postfix 3.6 and higher requires minimum OpenSSL 1.1.1
FreeBSD 11 users using base OpenSSL can switch to
mail/postfix35
If you wish to use postfix35 until FreeBSD 11 EoL you might run the
following command:
# pkg set -o mail/postfix:mail/postfix35
# pkg upgrade
20210505:
AFFECTS: users of sysutils/terraform
AUTHOR: 0mp@FreeBSD.org
Terraform has been updated from 0.13 to 0.15, which introduces several
incompatible changes. Please follow upgrading guide when updating
the package.
https://www.terraform.io/upgrade-guides/0-14.html
https://www.terraform.io/upgrade-guides/0-15.html
20210426:
AFFECTS: users of x11-fonts/iosevka
AUTHOR: 0mp@FreeBSD.org
The selection of options for Iosevka has become less granular as the port has
switched from TTF-based distfiles to super-TTC-based distfiles. Now all the
spacing variants are contained within one file for each Iosevka style.
20210425:
AFFECTS: users of python
AUTHOR: kai@FreeBSD.org
The default version of python3 and python was switched to 3.8.
For ports users wanting to keep version 3.7 as default,
add DEFAULT_VERSIONS+= python=3.7 python3=3.7 to make.conf
Following procedures may ease the upgrade:
For users of pre-build packages:
# sh
# for i in $(pkg query -g %n 'py37-*'); do pkg set -yn ${i}:py38-${i#py37-}; done
# pkg upgrade
For portmaster users:
# sh
# portmaster -o lang/python38 python37
# REINSTALL="$(pkg info -o "*py37*" | awk '{printf "%s ", $2}')"
# pkg delete -f "*py37*"
# portmaster $REINSTALL
# REBUILD=$(pkg query -g "%n:%dn" '*' | grep py3 | grep -v py38 | cut -d : -f 1 | sort -u)
# portmaster $REBUILD
# REBUILD2=$(pkg list | grep python-37 | xargs pkg which | awk '{print $6}' | sort -u)
# portmaster $REBUILD2
20210420:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v16.0.0, the latest
upstream release. This is a major release, including many significant
changes. Users are encouraged to read the release announcements before
upgrading:
https://nodejs.org/en/blog/release/v16.0.0/
20210416:
AFFECTS: Users of shells/bash, shells/bash-static with PORTS_READLINE=off
AUTHOR: olce.freebsd@certner.fr
Bundled readline now will use LOCALBASE/etc/inputrc as its ultimate default
inputrc file (instead of /etc/inputrc). This puts these ports in line with
what devel/readline has been doing recently (since 20210103).
20210414:
AFFECTS: users of graphics/OpenEXR or graphics/ilmbase
AUTHOR: mandree@FreeBSD.org
graphics/ilmbase was removed in favor of math/Imath 3.0.1,
and graphics/OpenEXR was updated to 3.0.1. Ports that depend on
OpenEXR and/or ilmbase according to INDEX were patched,
for ports where OpenEXR is an option that defaults to off, these
typical items needs to be changed - file bug reports in that case,
preferably with tested patches:
- The IlmBase parts Imath and half are now repackaged as Imath
- The IlmThread and Iex libraries are now part of OpenEXR
- Some header files were rearranged accordingly, into
${LOCALBASE}/include/OpenEXR vs. ${LOCALBASE}/include/Imath
- Some code needs a few #include statements added, often
#include <ImfHeader.h> or #include <ImfFrameBuffer.h>
- Some classes were removed, and the C++11 standard library
features need to be used, f. i. std::numeric_limits.
- Some code used Int64 or SInt64 should use uint64_t or int64_t.
Detailed porting hints are available here:
https://github.com/AcademySoftwareFoundation/Imath/blob/v3.0.1/docs/PortingGuide2-3.md
20210411:
AFFECTS: users or devel/py-RPyC
AUTHOR: skozlov@FreeBSD.org
devel/py-RPyC has been updated to version 5.0.1, which have some
incompatibilities with 4.x branch. Be sure to check them out before
upgrading:
https://rpyc.readthedocs.io/en/latest/changelog.html#backwards-incompatible
20210414:
AFFECTS: users of x11-fonts/oldschool-pc-fonts
AUTHOR: evgeniy@khramtsov.org
x11-fonts/oldschool-pc-fonts has been upgraded to 2.2. This version
changed names of many fonts. If you have configuration files with
specific font names set, you need to update your configurations
after upgrade.
20210406:
AFFECTS: users of www/phpvirtualbox
AUTHOR: dereks@lifeofadishwasher.com
www/phpvirtualbox has been updated to version 6.1. This new version
only supports version 6.1 of VirtualBox.
Version 5.x of phpvirtualbox has been preserved as
www/phpvirtualbox-legacy. If you require support for VirtualBox
5.x please install this version. Remember to copy your configuration
file in the new legacy installation.
20210328:
AFFECTS: users of www/caddy
AUTHOR: adamw@FreeBSD.org
The default locations for caddy runtime files have changed.
- Caddy's runtime log is now /var/log/caddy/caddy.log
(was /var/log/caddy.log)
- Automatic SSL certs are now stored in /var/db/caddy/data/caddy
(was /root/.local/share/caddy)
- Configuration autosaves are now stored in /var/db/caddy/config/caddy
(was /root/.config/caddy)
You can change these defaults. See /usr/local/etc/rc.d/caddy for the
list of settings.
20210322:
AFFECTS: users of net/wireguard
AUTHOR: decke@FreeBSD.org
A wireguard kernel implementation supporting FreeBSD 12.1 and newer was
added as net/wireguard-kmod recently.
The new default for users of net/wireguard is the kernel module.
If you experience problems with it you can switch back to wireguard-go
by removing net/wireguard-kmod and making sure net/wireguard-go is
installed.
The userland tools wg-quick(8) and wg(8) try to use kernel support if
the kernel module is available and otherwise fall back to wireguard-go
automatically. Config files are fully compatible.
20210317:
AFFECTS: users of security/strongswan
AUTHOR: driesm.michiels@gmail.com
The stroke starter interface has been deprecated by upstream
for some time now. The default interface for controlling the charon
daemon has switched from stroke to vici. Users still using the
legacy config files such as ipsec.conf and ipsec.secret (stroke, starter)
can easily revert to the old behavior by:
# sysrc strongswan_interface="stroke"
It is recommended to use the vici interface which is configured by swanctl.conf.
Check : https://wiki.strongswan.org/projects/strongswan/wiki/Fromipsecconf
to ease the transition from ipsec.* to swanctl.conf
20210313:
AFFECTS: users of net-mgmt/phpipam
AUTHOR: marko.cupac@mimar.rs
ipaddresses table in phpipam database is likely to contain incorrect datetime
values which prevent successful upgrade. Make sure to create backup of
phpipam database. Before starting upgrade wizard in web interface run the
following SQL query on phpipam database:
UPDATE ipaddresses SET lastSeen='1970-01-01 00:00:01' WHERE lastSeen < '0000-01-01 00:00:00';
20210310:
AFFECTS: users of textproc/redisearch
AUTHOR: osa@FreeBSD.org
The textproc/redisearch port has been updated to the recent stable
release - v2.0. Users wanting to stay on v1.6 can replace
textproc/redisearch with textproc/redisearch16 with one of the
following commands:
# pkg install textproc/redisearch16
or
# portmaster -o textproc/redisearch16 textproc/redisearch
or
# portupgrade -o textproc/redisearch16 textproc/redisearch
NOTE: The textproc/redisearch16 brings a new name for the module,
i.e. redisearch16.so, so be careful.
20210309:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: madpilot@FreeBSD.org
emulators/virtualbox-ose has been updated to 6.1.18. This new
version only works on amd64 hardware.
Previous version 5.x of the virtualbox ports have been preserved
as emulators/virtualbox-ose-legacy and similarly named ports for
the other parts.
If you can't run the latest version or wish to stay with the old
version, please install the legacy ports.
Also the additions at present build successfully only for amd64.
If you need i386 additions you can fallback to the old legacy
ones.
NOTE: There is no support for moving saved running machine states
across major updates of virtualbox. It is recommended to properly
shutdown all virtual machines before upgrading. Otherwise the saved
state can simply be discarded after the upgrade, if it's not
important to preserve it.
It should also be possible to downgrade to the legacy ports and
shutdown the machine properly from the saved state and then upgrade
back again.
20210302:
AFFECTS: users of editors/emacs-devel
AUTHOR: jrm@FreeBSD.org
If you get the error "Symbol's value as variable is void: minor-modes",
rebuild the offending Emacs packages. See
https://lists.gnu.org/archive/html/emacs-devel/2021-02/msg01164.html
for details.
20210220:
AFFECTS: users of math/py-mathics
AUTHOR: thierry@FreeBSD.org
math/py-mathics has been split into several ports, and Mathics Core
only provides a rudimentary command-line shell called mathics.
To get the same functionality as in 1.x, you need to install either
mathicsscript or Mathics-Django.
20210219:
AFFECTS: users of games/mangband
AUTHOR: adridg@FreeBSD.org
The client has updated from 1.1.3 (which has a single public server
left) to the current 1.5.3 (which has more public servers). If you
update, you can NOT connect to the old server any more. Remember
to finish your game before updating.
20210210:
AFFECTS: users of audio/spotifyd
AUTHOR: rodrigo@FreeBSD.org
The configuration format for audio/spotifyd is now TOML, make
sure to update your configuration file after upgrading the port.
Look at the sample configuration file for a working example.
https://github.com/Spotifyd/spotifyd/blob/master/docs/src/config/File.md
20210208:
AFFECTS: users of mail/mailscanner
AUTHOR: crees@FreeBSD.org
The clamavmodule has finally been removed after a long deprecation
period. Please remove all references to it in your mailscanner.conf as
it will now count as a syntax error and may stop MailScanner starting!
20210204:
AFFECTS: users of www/unit
AUTHOR: osa@FreeBSD.org
The default location for NGINX Unit's state directory has changed. It
was moved from /usr/local/libexec/unit to /var/db/unit in order to
avoid write operations on /usr/local filesystem.
20210130:
AFFECTS: users of graphics/opencv-core
AUTHOR: tcberner@FreeBSD.org
graphics/opencv-core has been reintegrated into graphics/opencv.
So there is no longer a circular dependency
opencv-core -> ffmpeg -> opencv
If you experience problems updating the packages, try
pkg delete -f opencv-core
20210124:
AFFECTS: users of net-mgmt/netbox
AUTHOR: kai@FreeBSD.org
The Django templating language (DTL) is no longer supported for export
templates. Please ensure that all export templates use Jinja2 before
upgrading.
Also the support for embedded graphs was completely removed and several
changes to the REST API were made. Please check the changelogs for
further details.
20210114:
AFFECTS: users of net-im/matterircd
AUTHOR: norrland@nullbyte.se
Commandline switches
Switched to viper for cmdline parsing, which does not support "short" flags.
You'll need to use --flag instead of -flag. Eg ./matterircd --debug
Bridge specific configuration is now only in configuration file. This means
the following flags have been removed: -restrict,-mmteam,-mmserver,
-mminsecure,-mmskiptlsverify.
You can set those in matterircd.toml, see the example file.
Config changes
BlacklistUser feature for slack has been renamed to DenyUsers.
JoinMpImOnTalk feature has been renamed to JoinDM and is available for
slack/mattermost
JoinInclude, JoinExclude now support regexp (see matterircd.toml.example)
20210113:
AFFECTS: users of databases/redis[-devel]
AUTHOR: osa@FreeBSD.org
The databases/redis port has been updated to the recent stable release.
Users wanting to stay on v5.x can replace databases/redis with
databases/redis5 with one of the following commands:
# pkg install databases/redis5
or
# portmaster -o databases/redis5 databases/redis
or
# portupgrade -o databases/redis5 databases/redis
20210106:
AFFECTS: mail/dovecot
AUTHOR: pi@FreeBSD.org
The VPOPMAIL option was removed, because it was dropped upstream,
so please check your config before upgrading.
20210106:
AFFECTS: sysutils/graylog
AUTHOR: dch@FreeBSD.org
graylog 4.0 and higher now use a new license, the SSPL. For more
details, see https://www.graylog.org/post/graylog-v4-0-licensing-sspl
20210102:
AFFECTS: x11/libexo, XFCE4 desktop users
AUTHOR: madpilot@FreeBSD.org
XFCE4 has been updated to version 4.16. Unluckily due to how the
update works out it interacts badly with a defect in pkg which can
cause files from the libexo package to be absent after upgrade.
To avoid the issue, before upgrading all packages, please update
libexo by itself:
# pkg upgrade libexo
# pkg upgrade
If you have already upgraded and you notice XFCE issues due to
missing libraries you can recover easily by forcing reinstallation
of libexo:
# pkg upgrade -f libexo
Users upgrading via ports should not be affected.
20201228:
AFFECTS: www/py-flexget
AUTHOR: jbeich@FreeBSD.org
py-flexget (or py37-flexget) has been renamed to flexget.
"pkg upgrade" doesn't track MOVED file unlike portmaster, so
provide a hint e.g.,
$ pkg upgrade -x flexget
or install again, letting pkg remove the old version
$ pkg install flexget
20201218:
AFFECTS: users of www/qt5-webengine
AUTHOR: kai@FreeBSD.org
Users that upgrade www/qt5-webengine without using pkg/poudriere might
experience failures due to conflicts with the installed version of 5.15.2.
In that case, pkg delete -f the qt5-webengine package before building
the updated version.
20201130:
AFFECTS: users of graphics/jpeg
AUTHOR: rene@FreeBSD.org
The graphics/jpeg port has been removed in favor of graphics/jpeg-turbo.
The former port was vulnerable and used an outdated ABI and API.
Please check your make configuration for JPEG_PORT and remove it or
set it to "jpeg-turbo" if it is currently set to "jpeg".
20201128:
AFFECTS: users of databases/cego
AUTHOR: pi@FreeBSD.org
Database updates from 2.45.x to 2.46.x require a xml tableset export
and import, since table structure information has been changed.
20201128:
AFFECTS: users of lang/ruby26
AUTHOR: mfechner@FreeBSD.org
The default ruby version has been updated from 2.6 to 2.7.
If you compile your own ports you may keep 2.6 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.6 as default version
#
DEFAULT_VERSIONS+=ruby=2.6
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkg, simply upgrade:
# pkg upgrade
If you do not use pkg, please check entry 20190420.
The description there should also work for this version.
20201112:
AFFECTS: users of net-mgmt/pushgateway
AUTHOR: rhurlin@FreeBSD.org
The v0.10.0 release changes the storage format. v0.10 can read the
storage format of v0.5--v0.9. It will then persist the new format so
that a downgrade won't be possible anymore [1].
For later releases >= v1.0.0 only persistence files created by v0.10+
are usable. So please, upgrade to v0.10 first to convert existing
persistence files.
It is intended to replace v0.10.0 in about four weeks from now (not
before 2020-12-12) by >= v1.3.0.
[1] https://github.com/prometheus/pushgateway/releases/tag/v0.10.0
20201110:
AFFECTS: users of net-mgmt/netbox
AUTHOR: kai@FreeBSD.org
Changes related to the NetBox configuration:
1. If in use, LDAP authentication must be enabled by setting
REMOTE_AUTH_BACKEND to 'netbox.authentication.LDAPBackend'. (The LDAP
configuration parameters in ldap_config.py remain unchanged.)
2. REMOTE_AUTH_DEFAULT_PERMISSIONS now takes a dictionary rather than a
list. This is a mapping of permission names to a dictionary of
constraining attributes, or None.
For example, ['dcim.add_site', 'dcim.change_site'] would become
{'dcim.add_site': None, 'dcim.change_site': None}.
3. Support for the DEFAULT_TIMEOUT parameter under REDIS database
configuration was removed. Set RQ_DEFAULT_TIMEOUT as a global
configuration parameter instead.
Please also check the pkg-message and the changelogs for further info.
20201106:
AFFECTS: users of www/samdruckerserver
AUTHOR: dvl@FreeBSD.org
If upgrading from < 0.2.4, the database schema has changed.
Run these scripts to update your database:
* PostgreSQL/updates-2020.08.28.sql
* PostgreSQL/procedures.sql
These scripts are in /usr/local/share/samdrucker/PostgreSQL
20201030:
AFFECTS: users of security/openvpn
AUTHOR: mandree@FreeBSD.org
The security/openvpn port has been updated to v2.5.0, which brings a
change to the default ciphersuite, which no longer contains BF-CBC.
Some options have been removed. Also, if you need to support very old (v2.3)
and unsupported clients or servers, you will need to adjust the
configuration. For details, see:
https://github.com/OpenVPN/openvpn/blob/release/2.5/Changes.rst#overview-of-changes-in-25
20201029:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v15.0.0, the latest
upstream release. A new port, www/node14, has been created for the
v14.x LTS branch. Users wanting to stay on v14.x can replace www/node
with www/node14 with one of the following commands:
# pkg install www/node14
or
# portmaster -o www/node14 www/node
or
# portupgrade -o www/node14 www/node
20201026:
AFFECTS: users of emulators/qemu
AUTHOR: bofh@FreeBSD.org
emulators/qemu has been updated to 5.0.1. Previous 4.2.X branch has
been repocopied to emulators/qemu42. If someone wants to stick with 4.2.X
branch please use one of the following command:
# pkg install emulators/qemu42
or
# portmaster -o emulators/qemu42 emulators/qemu
or
# portupgrade -o emulators/qemu42 emulators/qemu
20201021:
AFFECTS: users of www/py-unit
AUTHOR: osa@FreeBSD.org
The www/py-unit port has been renamed to www/unit-python.
20201012:
AFFECTS: Users of mesa-dri with VAAPI or VDPAU options
AUTHOR: manu@FreeBSD.org
The nondefault options VAAPI and VDPAU were removed from the mesa-dri
port and two new ports, mesa-gallium-va and mesa-gallium-vdpau now contain
the necessary libraries for using VAAPI or VDPAU on AMD hardware.
20201012:
AFFECTS: users of devel/libsoup-gnome
AUTHOR: bapt@FreeBSD.org
libsoup-gnome has been merged back into libsoup for people building locally:
first delete libsoup-gnome before installing the new libsoup
$ pkg delete -f libsoup-gnome
20201011:
AFFECTS: users of sysutils/rundeck3 who use MySQL as database
AUTHOR: daniel.tihanyi@tetragir.com
Please note that the MySQL JDBC driver is no longer bundled with Rundeck.
Please make sure that you migrate to the MariaDB Connector or copy the
driver yourself. More instructions:
https://docs.rundeck.com/docs/upgrading/upgrading-to-rundeck-3.3.4.html
20201006:
AFFECTS: users of sysutils/tenshi
AUTHOR: 0mp@FreeBSD.org
The default location for tenshi's configuration file has changed. It was
moved to /usr/local/etc/tenshi/tenshi.conf from /usr/local/etc/tenshi.conf
in order to follow upstream defaults.
20201002:
AFFECTS: users of mail/fetchmail beginning with 6.4.12_1
AUTHOR: mandree@FreeBSD.org
Note that if you are using fetchmail in a multi-user setup, i. e. with the
fetchmail_users (mind the -s!) variable set, the $fetchmail_home_prefix +
user second-guess work has been replaced by a real lookup of the user's home
directory. In the majority of configurations, this should not make a
difference, in some setups, it may open up some flexibility.
The fetchmail_home_prefix variable is ignored from 6.4.12_1 onwards.
Also, the rc script redirects its input from /dev/null so that passwords
will not be interactively queried from an rcfile. Put passwords into
the [.]fetchmailrc or into a .netrc file.
20201002:
AFFECTS: users of sysutils/modules
AUTHOR: 0mp@FreeBSD.org
The upstream developers of the Modules port encourage users to consult
the MIGRATING document, which describes the major changes occurring between
versions of Modules. It provides an overview of the new features and changed
behaviors that will be encountered when upgrading:
https://modules.readthedocs.io/en/v4.6.0/MIGRATING.html
20200930:
AFFECTS: users of sysutils/syslog-ng32[789]
AUTHOR: cy@FreeBSD.org
rc.conf variables syslog_ng_config and syslog_ng_pid have been replaced
by syslog_ng_flags and syslog_ng_pidfile respectively, making them
consistent with the rest of the ports tree. syslog_ng_config and
syslog_ng_pid will continue to work until syslog-ng331 has been
released and imported into ports.
20200924:
AFFECTS: users of net/freeradius3, who need python support
AUTHOR: zi@FreeBSD.org
FreeRADIUS 3.x currently uses python 2.7 for rlm_python support, which has
been deprecated and will be removed from the tree at the end of this year.
Starting in 3.0.21_2, the PYTHON option has been converted to use python 3.x.
Users should verify their python scripts are 3.x compatible and upgrade to
3.0.21_2 (or higher) to bring in python 3.x support.
20200921:
AFFECTS: users of databases/postgresql* and other software using PostgreSQL to run
AUTHOR: kbowling@FreeBSD.org
The default version of PostgreSQL has been switched from 11 to 12.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 11.9, your
files are named according to this.
# service postgresql stop
# pkg create postgresql11-server postgresql11-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql11-server-11.9.txz -C /tmp/pg-upgrade
# tar xf postgresql11-contrib-11.9.txz -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql11-server databases/postgresql11-contrib databases/postgresql11-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql12-server databases/postgresql12-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql12-server databases/postgresql12-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql12-server databases/postgresql12-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data12 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data11/ -B /usr/local/bin/ -D /var/db/postgres/data12/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) The default user changed from "pgsql" to "postgres" in 11. The migration steps above now assume
the "postgres" database user and FreeBSD user.
2) See the updating entry 20190829 if you are updating from a release prior to 11.
3) If you use non-default initdb options, you have to adjust the initdb-command accordingly
20200918:
AFFECTS: users of mail/thunderbird
AUTHOR: cmt@FreeBSD.org
Thunderbird has been updated to the 78esr series. Thunderbird will
try to convert old profiles on first start, but conversion may fail
especially on old profiles. Also, older versions of Thunderbird will
not be able to use a profile once it has been converted. It is
strongly recommended to move any ~/.thunderbird folder away before
starting Thunderbird 78 for the first time, thus creating a new and
empty profile.
Also note that OpenPGP functionality has been integrated into Thunderbird,
obsoleting the Enigmail extension.
Check https://wiki.mozilla.org/Thunderbird:OpenPGP for details, and
especially https://wiki.mozilla.org/Thunderbird:OpenPGP:Smartcards
if your private key lives on a smartcard.
20200914:
AFFECTS: users of lang/php72
AUTHOR: tz@FreeBSD.org
The default version of PHP has been switched from 7.2 to 7.4.
If you use binary packages you should make a list of php packages
before running 'pkg upgrade':
# pkg info php7\* > ~/installed-php-ports-list
After the upgrade, check with such list if all your php extensions
are still installed, and reinstall them if needed.
If you use mod_php72 you need to deinstall it and install mod_php74.
20200811:
AFFECTS: users of *-emacs26-* packages
AUTHOR: jrm@FreeBSD.org
With the release of Emacs version 27.1, the major version of editors/emacs has
changed from 26 to 27. This means the names of some dependent packages have
also changed, so simply running `pkg upgrade` will not upgrade foo-emacs26-x
to foo-emacs27-x. To update these packages, run these commands with superuser
privileges.
Binary package users:
# sh
# for i in $(pkg query -g %n '*-emacs26*'); do \
nn=$(echo "$i" | sed -e 's/emacs26/emacs27/'); \
pkg set -yn "$i":"$nn"; \
done;
# pkg upgrade
portmaster users:
# portmaster -r emacs
20200803:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.32. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, follow the
instructions in entry 20161103, it should still be the same.
20200726:
AFFECTS: users of net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
The %%WWWDIR%%%/logs directory has been relocated to /var/log/librenms/
via the APP_LOG directive in %%WWWDIR%%%/.env.example - this won't affect
existing installs, but you are strongly encouraged to update your .env file
settings and relocate your logs.
Logs which were going to /var/log/messages and /var/log/librenms/ now only go
to /var/log/librenms/
20200720:
AFFECTS: users of net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
As mentioned previously in 20200503 polling via cronjob has been removed as of
release 1.63 - see
https://community.librenms.org/t/dropping-support-for-php-7-1-and-python-2/11851
A database upgrade is required:
cd /usr/local/www/librenms
sudo ./lnms migrate
You must migrate to the Dispatch Service:
https://docs.librenms.org/Extensions/Dispatcher-Service/
You may need to add LIBRENMS_USER to .env (see .env.example).
These steps should get you running:
* comment out the crontab entries listed above under PYPOLLER
* populate %%WWWDIR%%/.env with:
* APP_KEY - see farther below for how to create
* NODE_ID - see just below for how to create
* DB_HOST
* DB_DATABASE
* DB_USERNAME
* DB_PASSWORD
* you can create a NODE_ID with: php -r 'echo uniqid() . "\n";'
* sysrc librenms_enable="YES"
* service librenms start
20200719:
AFFECTS: users of emulators/qemu
AUTHOR: bofh@FreeBSD.org
emulators/qemu has been updated to 4.2.1. Previous 4.1.X branch has
been repocopied to emulators/qemu41. If someone wants to stick with 4.1.X
branch please use one of the following command:
# pkg install emulators/qemu41
or
# portmaster -o emulators/qemu41 emulators/qemu
or
# portupgrade -o emulators/qemu41 emulators/qemu
20200716:
AFFECTS: users of shells/bash, shells/bash-static
AUTHOR: ehaupt@FreeBSD.org
In order to cleanly decouple bash from base, bash now reads `profile` from
LOCALBASE/etc insead of from /etc. If you are using system wide bash
configuration in /etc/profile please migrate to LOCALBASE/etc/profile
# cp /etc/profile /usr/local/etc/profile
or create a symlink
# ln -s /etc/profile /usr/local/etc/
If you encounter the following error, you may have the obsolete
/lib/libreadline.so.8 lying around after an incomplete base update:
ld-elf.so.1: Undefined symbol "rl_signal_event_hook" referenced from COPY relocation in /usr/local/bin/bash
Please refer to to (23.5.6.2) in the FreeBSD Handbook on how to
safely check for outdated files and libraries:
https://www.freebsd.org/doc/en/books/handbook/makeworld.html
20200713:
AFFECTS: users of mail/php7[2-4]-imap
AUTHOR: tz@FreeBSD.org
The imap module of PHP was compiled against cclient till now. But this lib is
unmaintained for over 7 years. When combined with modern OpenSSL there are
various crashes reported.
Switching to the fork panda-cclient fixes these issues. Therefore we make the
usage of Panda cclient the new default. If you want to use the old cclient,
you need to enable it now!
20200616:
AFFECTS: users of www/baikal
AUTHOR: gahr@FreeBSD.org
The www/baikal has been updated to 0.7.1. With the 0.7.0 release, our
configuration format was updated to use YAML files. You need to go through
the installer again but we pre-fill most values with the ones from your old
installation. We recommend that you make a full backup of your data, as a
safety measure. Starting with 0.7.0, Baikal stores data in both the Specific
and the config folders. Keep this in mind when upgrading!
Known issue:: Upgrading from versions older than 0.6.1 does not work.
20200613:
AFFECTS: users of editors/libreoffice
AUTHOR: fluffy@FreeBSD.org
LibreOffice was updated to 6.4 branch with some critical changes:
- GTK2 option is obsolete by upstream
- GTK3 option is not more set by default because of unstable yet and have visual glitches
- QT5 option is set by default to provide comfy visual style for every user
- KDE option was renamed to KF5 follows upstream
Please re-run "make config" to pick up the new defaults
20200610:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v14.0.0, the latest
upstream release. This is a major release, including many significant
changes. Users are encouraged to read the release announcements before
upgrading:
https://nodejs.org/en/blog/release/v14.0.0/
20200602:
AFFECTS: users of www/radicale
AUTHOR: decke@FreeBSD.org
Migration from radicale 1.x to 2.x requires that you export the storage
with radicale 1.1.6 before updating.
Migration instructions are available at:
https://web.archive.org/web/20190314225402/https://radicale.org/1to2/
20200602:
AFFECTS: users of sysutils/py-salt
AUTHOR: krion@FreeBSD.org
This port is moved to sysutils/py-salt-2019 and sysutils/py-salt was
updated to version 3000.
If you wish to use pysalt-2019 in the future, you might run the
following command:
# pkg set -o sysutils/py-salt:sysutils/py-salt-2019
# pkg upgrade
20200531:
AFFECTS: users of mail/postfix-policyd-spf-python
AUTHOR: yasu@utahime.org
This port is now deprecated because upstream project is superseded by its
successor. So uninstall this port and install mail/py-spf-engine instead.
Keep in mind that the path of configuration file is changed from
${PREFIX}/etc/postfix-policyd-spf-python/policyd-spf.conf to
${PREFIX}/etc/python-policyd-spf/policyd-spf.conf. So you need to move
it to new location unless you use the default one without changing.
20200526:
AFFECTS: users of databases/mariadb104-client, databases/mariadb104-server
AUTHOR: brnrd@FreeBSD.org
The ports now add sample configuration files to /usr/local/etc/mysql. You
must merge your client configuration with the conf.d/client.cnf and your
server configuration with conf.d/server.cnf.
20200518:
AFFECTS: users of converters/libiconv
AUTHOR: zeising@FreeBSD.org
Support for the Japanese specific patches have been discontinued.
These were previously added in a nondefault ports options, for people who
needed them.
If you still need them, it might be possible to create a port of libiconv 1.14
which includes those patches.
20200517:
AFFECTS: users of x11/sddm
AUTHOR: arrowd@FreeBSD.org
The home directory of sddm user has been moved to /var/lib/sddm. It is advised
to run following commands as root after updating the package:
# pw usermod -n sddm -d /var/lib/sddm
# pwd_mkdb /etc/master.passwd
# mv /usr/local/etc/sddm/home/state.conf /var/lib/sddm/state.conf
# rm -rf /usr/local/etc/sddm/home
Otherwise, SDDM will keep using /usr/local/etc/sddm/home/ as its HOME.
20200515:
AFFECTS: users of devel/libphutil, devel/arcanist-lib, devel/phabricator
AUTHOR: grembo@FreeBSD.org
Upstream fully deprecated devel/libphutil and merged its functionality
into devel/arcanist-lib and devel/phabricator. As a result, the
devel/libphutil port will be removed from the ports tree.
After upgrading devel/(arcanist-lib|phabricator) to version 20200514, it is
recommended to remove the orphaned libphutil package by running:
# pkg delete php\*-libphutil
Alternatively, 'pkg autoremove' will also work as expected, but might
remove orphaned packages unrelated to this update.
20200505:
AFFECTS: users of net-im/pidgin-rocketchat
AUTHOR: tobias.rehbein@web.de
This port has been turned into a libpurple plugin (net-im/purple-rocketchat)
to support other libpurple clients than pidgin.
This also changes some dependencies and you should run the following command
to prevent pidgin from being autoremoved.
# mark pidgin as being not automatically installed
pkg set -A 0 pidgin
20200504:
AFFECTS: users of x11-wm/hs-xmonad
AUTHOR: arrowd@FreeBSD.org
From now, it is recommended to use "build script" method to compile XMonad
config. See https://github.com/xmonad/xmonad-testing/ for general info and
port's pkg-message for concrete steps.
20200503:
AFFECTS: users of net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
Polling via cronjob is deprecated as of release 1.63
Please see https://community.librenms.org/t/dropping-support-for-php-7-1-and-python-2/11851
Please migrate to the Dispatch Service:
https://docs.librenms.org/Extensions/Dispatcher-Service/
These steps should get you running:
* comment out the crontab entries listed above under PYPOLLER
* populate %%WWWDIR%%/.env with:
* APP_KEY - see farther below for how to create
* NODE_ID - see just below for how to create
* DB_HOST
* DB_DATABASE
* DB_USERNAME
* DB_PASSWORD
* you can create a NODE_ID with: php -r 'echo uniqid() . "\n";'
* sysrc librenms_enable="YES"
* service librenms start
20200501:
AFFECTS: users of www/phpmyfaq
AUTHOR: flo@FreeBSD.org
phpMyFAQ has been updated to 3.0.2, old templates are not compatible with
this new version. Please see:
https://www.phpmyfaq.de/docs/3.0#3.4
20200428:
AFFECTS: users of sysutils/ansible
AUTHOR: bofh@FreeBSD.org
Ansible has been updated to 2.9.7. Please follow the porting guide
to update the rulesets:
https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_2.9.html
If you wish to stay with 2.8 version, you can switch
to new sysutils/ansible28 port, which tracks stable 2.8 branch:
# pkg set -n ansible:ansible28
20200428:
AFFECTS: x11-servers/xwayland-devel
AUTHOR: jbeich@FreeBSD.org
DRI3 is enabled by default since mesa-libs-18.3.2_4, so you no
longer need to define LIBGL_DRI3_ENABLE in ~/.profile or ~/.login.
See 20200308 entry for more details.
20200422:
AFFECTS: users of devel/kyua
AUTHOR: brooks@FreeBSD.org
A tests group has been added and the tests user should be a member
of it by default rather than nobody. You should update your password
database to match (change the group from 65534 to 977 after updating).
Please use the following command to do so:
pw usermod -n tests -g tests
20200408:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
OpenSSH was upgraded to 8.2p1 on 2020-03-23.
A restart of sshd is required after upgrade due to an incompatibility
introduced in 8.2.
Please see https://www.openssh.com/txt/release-8.2 for upcoming
deprecation notices.
20200408
AFFECTS: users of net/irrd
AUTHOR: bofh@FreeBSD.org
Legacy version of net/irrd has been moved to net/irrd-legacy.
net/irrd has been upgraded to 4.X branch. If someone wants to stick with
legacy version then pkg users have to do something like
# pkg set -o net/irrd:net/irrd-legacy
For portmaster users
# portmaster -o net/irrd-legacy net/irrd
Both of the version can be installed and used concurrently in case there is
a need for migration
20200403:
AFFECTS: users of x11-fonts/fontconfig
AUTHOR: desktop@FreeBSD.org
Fontconfig 2.13.1 generated .uuid files in the fonts directory which where
not properly registered to the packages. To clean them up, please execute the
following command:
find /usr/local/share/fonts -type f -name .uuid -delete
20200326:
AFFECTS: users of devel/sonarqube and devel/sonar-ant-task
AUTHOR: netchild@FreeBSD.org
The outdated port devel/sonarqube has moved to
devel/sonarqube-community to make it clear that it is the community
edition. The log and DB files are still stored in the same location.
The devel/sonar-ant-task port has moved to devel/sonarqube-ant-task
to match the upstream-name. The install location is renamed
accordingly.
At the same time the user/group of the sonarqube port changed from
www:www to sonarqube:sonarqube.
It is expected that nobody was using the 6.2 version from 2016
anymore and no change needs to be done. No analysis was done to check
if the old 6.2 version can be updated in-place to the 8.2 version.
As such if there is still someone using the old 6.2 version, you may
have to delete /var/log/sonarqube and /var/db/sonarqube before
installing the new version.
20200320
AFFECTS: users of devel/qca
AUTHOR: kde@FreeBSD.org
New versions of devel/qca stopped supporting OpenSSL < 1.1.
For this reason devel/qca-legacy has been added, which is
held back at an older version until FreeBSD 11 goes EOL.
Ports depending on devel/qca should stop adding direct LIB_DEPENDS
and switch to depending on it via USES=qca.
FreeBSD 11 users might want to run something like
pkg set -o devel/qca:devel/qca-legacy
20200320:
AFFECTS: users of x11/libxkbcommon
AUTHOR: zeising@FreeBSD.org
The libxkbcommon library (x11/libxkbcommon), used to handle keyboards
in some applications, most notably kde and wayland, have been switched
to use evdev rules by default on FreeBSD 12 and later. Some keys, most
notably arrow keys, may not work in applications using libxkbcommon if
you are using xf86-input-keyboard rather than xf86-input-libinput.
If you have trouble with the keyboard keys, and if /var/log/Xorg.*.log
shows that the "kbd" or "keyboard" driver is being used, you need to
switch to legacy rules by setting the environment variable
XKB_DEFAULT_RULES to xorg.
This switch is made to match the default configuration on FreeBSD 12.1 and
later, the default configuration on FreeBSD 11.3 still uses the legacy
rules.
20200316:
AFFECTS: users of net-im/slack-term
AUTHOR: dmgk@FreeBSD.org
The config file location was changed from ~/.slack-term to
~/.config/slack-term/config, please move your existing config file
accordingly.
20200308
AFFECTS: users of graphics/mesa-libs and legacy graphics drivers
AUTHOR: zeising@FreeBSD.org
The mesa OpenGL library (graphics/mesa-libs) has been switched to use DRI3
by default, instead of the older DRI2 interface. This might cause regressions
when using the legacy graphics drivers, either through
graphics/drm-legacy-kmod or the graphics drivers in base.
If you experience issues when running OpenGL applications it is possible
to force the use of DRI2 by setting the LIBGL_DRI3_DISABLE environment
variable to 1 before starting any OpenGL application. The easiest way to
do this is by adding it to either your shell startup files or .xinitrc.
20200306
AFFECTS: users of databases/mysql80-server
AUTHOR: joneum@FreeBSD.org
As of MySQL 8.0.16, the MySQL server performs the upgrade tasks previously
handled by mysql_upgrade. Consequently, mysql_upgrade is unneeded and is
deprecated as of that version, and will be removed in a future MySQL version.
Because mysql_upgrade no longer performs upgrade tasks,
it exits with status 0 unconditionally.
20200303:
AFFECTS: users of net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
1. Apache / mod_php options removed
The APACHEMOD option has been removed. LibreNMS can be used
with other webservers, not just Apache. In order to simplify
the port, the option was removed.
Now you manually install the webserver of your preference.
If upgrading from LibreNMS < 1.61, you can do this to
prevent 'pkg autoremove' from uninstalling Apache / mod_php:
$ sudo pkg set -A 0 apache24 mod_php74
Mark apache24-2.4.41 as not automatically installed? [y/N]: y
Mark mod_php74-7.4.3 as not automatically installed? [y/N]: y
Adjust mod_php74 to suit the version of mod_php you have.
2. include/defaults.inc.php is gone
The file include/defaults.inc.php is no longer distributed by
the upstream project. The FreeBSD port patched this file to
correct the paths to common tools such as ping, snmpwalk, etc.
These values previously adjusted by the port must now be specified
in config.php. New installs will have this automatically, but existing
installs must be updated manually. These are the entries you should
add if upgrading from LibreNMS < 1.61:
$config['snmpwalk'] = '/usr/local/bin/snmpwalk';
$config['snmpget'] = '/usr/local/bin/snmpget';
$config['snmpbulkwalk'] = '/usr/local/bin/snmpbulkwalk';
$config['snmptranslate'] = '/usr/local/bin/snmptranslate';
$config['ping'] = '/sbin/ping';
$config['mtr'] = '/usr/local/bin/mtr';
$config['nmap'] = '/usr/local/bin/nmap';
$config['nagios_plugins'] = '/usr/local/libexec/nagios';
$config['ipmitool'] = '/usr/local/bin/ipmitool';
$config['virsh'] = '/usr/local/bin/virsh';
$config['dot'] = '/usr/local/bin/dot';
$config['sfdp'] = '/usr/local/bin/sfdp';
$config['nfdump'] = '/usr/local/bin/nfdump';
20200229:
AFFECTS: users of textproc/apache-solr
AUTHOR: mfechner@FreeBSD.org
Apache-solr switched to the supported java LTS version 11.
Make sure you update the following files accordingly:
/usr/local/etc/solr.in.sh (see /usr/local/etc/solr.in.sh.sample)
/usr/local/etc/javavm_opts.conf (JAVA_HOME=/usr/local/openjdk11/)
20200225:
AFFECTS: users of net-mgmt/netbox
AUTHOR: kai@FreeBSD.org
1. Removal of the Topology Maps feature
The deprecated topology maps feature has been removed. Please replicate
any required data to another source before upgrading NetBox to v2.7.7, as
any existing topology maps will be deleted.
2. Changed REDIS database configuration settings
The REDIS database configuration parameters were splitted up in two
discrete subsections named "webhooks" and "caching" with the 2.7 release.
This requires modification of the REDIS parameter in configuration.py as
follows:
Old Redis sample configuration:
REDIS = {
'HOST': 'localhost',
'PORT': 6379,
'PASSWORD': '',
'DATABASE': 0,
'CACHE_DATABASE': 1,
'DEFAULT_TIMEOUT': 300,
'SSL': False,
}
New Redis sample configuration:
REDIS = {
'webhooks': {
'HOST': 'redis.example.com',
'PORT': 1234,
'PASSWORD': 'foobar',
'DATABASE': 0,
'DEFAULT_TIMEOUT': 300,
'SSL': False,
},
'caching': {
'HOST': 'localhost',
'PORT': 6379,
'PASSWORD': '',
'DATABASE': 1,
'DEFAULT_TIMEOUT': 300,
'SSL': False,
}
}
Note that the CACHE_DATABASE parameter has been removed and the connection
settings have been duplicated for both webhooks and caching. This allows
one to make use of separate Redis instances if desired. It is fine to use
the same Redis service for both functions, although the database
identifiers should be different.
Please also check the pkg-message and the changelogs for further info.
20200223:
AFFECTS: users of security/gsasl
AUTHOR: hrs@FreeBSD.org
The library part of security/gsasl has been split into security/libgsasl.
The security/gsasl now depends on security/libgsasl. Due to this change,
old security/gsasl conflicts with the new security/libgsasl and it can
prevent the installed security/gsasl from upgrading. Please remove the
installed security/gsasl before upgrading if a conflict error occurs.
20200220:
AFFECTS: users of x11-servers/xorg-server
AUTHOR: zeising@FreeBSD.org
x11-servers/xorg-server has been updated to 1.20.7.
With this update, xorg-server has switched from using the devd backend to
the udev backend for device configuration on FreeBSD 12 and 13. If you have
issues with input devices, please see the install message for details.
The HAL backend option has been completely removed, as it was deprecated.
If you have problems with input devices, ensure that both x11/libinput and
x11-drivers/xf86-input-libinput are installed. They are installed in the
default configuration, but if you have a custom configuration, they might not
be.
20200210:
AFFECTS: users of net-im/prosody
AUTHOR: thomas@beingboiled.info
Prosody's pid file and data directory have moved to a new location.
If you are upgrading from a version with the pid file and data
directory in /usr/local/var/lib/prosody please perform these steps:
# stop Prosody
pkill -F /usr/local/var/lib/prosody/prosody.pid
# copy the data directory
cp -a /usr/local/var/lib/prosody /var/db/
rm -f /var/db/prosody/prosody.pid
Make sure your prosody config has the following option set:
pidfile = "/var/run/prosody/prosody.pid"
Then start Prosody again. Everything should be working as before and
the /usr/local/var/lib/prosody directory can now be removed.
20200207:
AFFECTS: users of security/nss
AUTHOR: lwhsu@FreeBSD.org
NSS header files and libraries have been moved from ${PREFIX}/include/nss/nss
and ${PREFIX}/lib/nss to ${PREFIX}/include/nss and ${PREFIX}/lib
20200204:
AFFECTS: users of editors/vim
AUTHOR: adamw@FreeBSD.org
The PYTHON2 and PYTHON3 options have been turned into a single PYTHON
option that uses whichever python you've set as default. However,
this means that you cannot have both python2 and python3 support at
the same time.
20200126:
AFFECTS: users of multimedia/gstreamer1-plugins[-bad]
AUTHOR: kwm@freebsd.org
In GStreamer 1.16 some files moved from the gstreamer1-plugins-bad package
to the gstreamer1-plugins package.
If your using a tool like portmaster or portupgrade delete the old -bad
port and then follow the normal upgrade method.
# pkg delete -f gstreamer1-plugins-bad
20200126:
AFFECTS: users of sysutils/helm
AUTHOR: danilo@FreeBSD.org
The Helm project have deprecated the Tiller utility in Helm 3. If you are using
Helm 2 you will need to migrate the configuration to be compatible with Helm 3.
Please, refer to the following documentation for more information about the
migration process:
https://helm.sh/blog/migrate-from-helm-v2-to-helm-v3/
Note that the 2to3 plugin binary is not available for FreeBSD and you will need
to compile it yourself.
20200113:
AFFECTS: users of python and net/samba410, devel/talloc, devel/tevent, databases/tdb, databases/ldb*
AUTHOR: timur@FreeBSD.org
In the entry 20191216 for the Python update the filtering constrains
are too limiting and omit the Samba supplimentary libraries, which do
have Python bindings to the default Python 3.x version. With the update
of the default Python3 version you also need to rebuild all the
supplementary Samba libraries and samba410 itself.
For portmaster users it would be enough to run:
# portmaster devel/talloc devel/tevent databases/tdb databases/ldb15 net/samba410
20200109:
AFFECTS: www/firefox
AUTHOR: gecko@FreeBSD.org
Firefox requires Capsicum since r522464 for IPC and in future will
require Capsicum for process sandboxing. If you use a custom kernel
make sure to copy the following lines from GENERIC kernel:
options CAPABILITY_MODE # Capsicum capability mode
options CAPABILITIES # Capsicum capabilities
20200107:
AFFECTS: Users of *-emacs27-* packages
AUTHOR: ashish@FreeBSD.org
There is a major version bump in 28.0.50, therefore to upgrade all the
packages dependent on editors/emacs-devel, please use the following commands:
# sh
# for i in $(pkg query -g %n '*-emacs27*'); do \
nn=$(echo "$i" | sed -e 's/emacs27/emacs28/'); \
pkg set -yn "$i":"$nn"; done;
# pkg upgrade
20200106:
AFFECTS: users of net/gnatsd
AUTHOR: olgeni@FreeBSD.org
net/gnatsd has been replaced by net/nats-server to reflect the
new naming upstream.
All options in rc.conf should be renamed by replacing 'gnats'
with 'nats' (nats_enable, nats_user, nats_options).
20200101:
AFFECTS: users of security/openssl and security/openssl111
AUTHOR: brnrd@FreeBSD.org
The openssl port was removed on 2019-12-31, subsequently the openssl111
port was renamed to openssl on 2020-01-01.
The shared library version of OpenSSL has been bumped.
Users of DEFAULT_VERSIONS= ssl=openssl111 must update this to
ssl=openssl.
You must rebuild all ports that depend on OpenSSL if you use OpenSSL
from ports.
20191226:
AFFECTS: users of sysutils/dsbmd
AUTHOR: mk@freeshell.de
With version 1.10 dsbmd now uses sysutils/fusefs-jmtpfs for mounting
MTP devices. Please adjust your dsbmd.conf or recreate it from the new
dsbmd.conf.sample.
20191225:
AFFECTS: multimedia/libva-intel-media-driver
AUTHOR: jbeich@FreeBSD.org
As of libva 2.6.0 iHD driver is automatically enabled, so you no
longer need to adjust LIBVA_DRIVER_NAME in ~/.profile or ~/.login.
20191221:
AFFECTS: users of misc/openhab2
AUTHOR: netchild@FreeBSD.org
If you upgrade from a pevious version, make a backup of
/var/db/openhab2
read about the breaking changes in the release notes at
https://github.com/openhab/openhab-distro/releases/tag/2.5.0
and run
%%PREFIX%%/libexec/openhab2/runtime/bin/update.freebsd
which takes care about changes for:
- Textual Configuration
- Next Generation Rule Engine
20191216:
AFFECTS: users of python
AUTHOR: antoine@FreeBSD.org
Default version of python3 and python was switched to 3.7.
For ports users wanting to keep version 3.6 as default,
add DEFAULT_VERSIONS+= python=3.6 python3=3.6 to make.conf
This may ease the upgrade for users of pre-build packages:
# sh
# for i in $(pkg query -g %n 'py36-*'); do pkg set -yn ${i}:py37-${i#py36-}; done
# pkg upgrade
For portmaster users:
# sh
# portmaster -o lang/python37 python36
# REINSTALL="$(pkg info -o py36-\* | awk '{printf "%s ", $2}')"
# pkg delete -f py36-\*
# portmaster $REINSTALL
# REBUILD=$(pkg query -g "%n:%dn" '*' | grep py3 | grep -v py37 | cut -d : -f 1 | sort -u)
# portmaster $REBUILD
# REBUILD2=$(pkg list | grep python-36 | xargs pkg which | awk '{print $6}' | sort -u)
# portmaster $REBUILD2
20191204
AFFECTS: users of mail/nextcloud-mail
AUTHOR: brnrd@FreeBSD.org
Version 0.20.0 removed the default mail configuration via config.php.
All users will be prompted to enter account and SMTP- and IMAP-server
details for sending and reading email.
20191126:
AFFECTS: consumers of net/py-urllib3
AUTHOR: kai@FreeBSD.org
Since version 1.25 HTTPS connections are now verified by default which is
done via "cert_reqs = 'CERT_REQUIRED'". While certificate verification
can be disabled via "cert_reqs = 'CERT_NONE'", it's highly recommended to
leave it on.
Various consumers of net/py-urllib3 already have implemented routines that
either explicitly enable or disable HTTPS certificate verification (e.g.
via configuration settings, CLI arguments, etc.).
Yet it may happen that there are still some consumers which don't
explicitly enable/disable certificate verification for HTTPS connections
which could then lead to errors (as is often the case with self-signed
certificates).
In case of an error one should try first to temporarily disable
certificate verification of the problematic urllib3 consumer to see if
this approach will remedy the issue.
20191125:
AFFECTS: users of emulators/qemu
AUTHOR: bofh@FreeBSD.org
emulators/qemu31 has been updated to 4.1.1. Previous 3.1.X branch has
been repocopied to emulators/qemu31. If someone wants to stick with 3.1.X
branch please use one of the following command:
# pkg install emulators/qemu31
or
# portmaster -o emulators/qemu31 emulators/qemu
or
# portupgrade -o emulators/qemu31 emulators/qemu
20191124:
AFFECTS: users of irc/eggdrop
AUTHOR: dbaio@FreeBSD.org
The irc/eggdrop port has been updated to 1.8.4 and its config is not
backward compatible with 1.6.21. A new port was created to keep 1.6.21
version available at irc/eggdrop16 and it will be available for 3 months
until users have time to upgrade their configuration.
More information at:
https://raw.githubusercontent.com/eggheads/eggdrop/v1.8.4/NEWS
If you would like to keep using 1.6.21, please run the following command
to update pkg database:
pkg set -n eggdrop:eggdrop16
pkg set -o irc/eggdrop:irc/eggdrop16
20191108:
AFFECTS: users of databases/redis[-devel]
AUTHOR: osa@FreeBSD.org
The databases/redis port has been updated to the recent stable release.
Users wanting to stay on v4.x can replace databases/redis with
databases/redis4 with one of the following commands:
# pkg install databases/redis4
or
# portmaster -o databases/redis4 databases/redis
or
# portupgrade -o databases/redis4 databases/redis
20191103:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v13.0.0, the latest
upstream release. A new port, www/node12, has been created for the
v12.x LTS branch. Users wanting to stay on v12.x can replace www/node
with www/node12 with one of the following commands:
# pkg install www/node12
or
# portmaster -o www/node12 www/node
or
# portupgrade -o www/node12 www/node
20191029:
AFFECTS: users of emulators/open-vm-tools[-nox11]
AUTHOR: jpaetzel@FreeBSD.org
open-vm-tools 11.0.1 has removed the vmxnet driver. This driver has been
in tree for quite some time and hopefully everyone is using the in tree
version, however if you had removed device vmx from your kernel, or are
running an unsupported version of FreeBSD which didn't have the driver
included in the base system, updating your open-vm-tools version will
leave you without networking.
20191026:
AFFECTS: users of www/qt5-webengine
AUTHOR: kai@FreeBSD.org
Users that upgrade www/qt5-webengine without using pkg/poudriere might
experience failures due to conflicts with the installed version of 5.12.2.
In that case, pkg delete -f the qt5-webengine package before building
the updated version.
20191025:
AFFECTS: users of x11/nvidia-driver (and slave ports)
AUTHOR: danfe@FreeBSD.org
x11/nvidia-driver* ports no longer install Linux programs and libraries,
which had been moved to their own ports (x11/linux-nvidia-libs*). When
updating the driver package next time, remember to install them manually
if you need to run Linux OpenGL programs.
20191016:
AFFECTS: users of KDE Plasma Desktop (x11/plasma5*)
AUTHOR: kde@FreeBSD.org
With Plasma 5.17 the startup script has been renamed. People who use the
.xinitrc method to start Plasma have to call the new binary.
Previously:
exec ck-launch-session startkde
Change to:
exec ck-launch-session startplasma-x11
20191014:
AFFECTS: users of mail/rspamd, mail/rspamd-devel
AUTHOR: vsevolod@FreeBSD.org
Sample configuration files has been removed as default configuration files
are NOT intended for modification by users and SHOULD be overwritten on
port upgrade.
Make sure the default configuration files are unmodified and migrate all
configuration changes to the proper places, before you continue.
20191002:
AFFECTS: users of textproc/groff
AUTHOR: bapt@FreeBSD.org
with groff 1.2.4_3, groff does not depend anymore on ghostscript and
netpbm. In order to be able to properly use the html backend the user
can install ghostscript and netpbm from ports without the need of
reinstalling the package.
Also note that the X11 option has been removed.
20190930:
AFFECTS: users of net-mgmt/netbox
AUTHOR: kai@FreeBSD.org
Since the 2.6 release a running Redis server instance is required for
caching objects to run. Also the following settings like below need to be
added (or modified) in the existing configuration.py:
REDIS = {
'HOST': 'localhost',
'PORT': 6397,
'PASSWORD': ''
'DATABASE': 0,
'CACHE_DATABASE': 1,
'DEFAULT_TIMEOUT': 300,
'SSL': False,
}
Note that if you were using these settings in a prior release with
webhooks, the DATABASE setting remains the same but an additional
CACHE_DATABASE settings has been added with a default value of 1 to
support the caching backend.
The DATABASE setting will be renamed in a future release of NetBox to
better relay the meaning of the setting. It is highly recommended to keep
the webhook and cache databases separate. Using the same database number
for both may result in webhook processing data being lost during cache
flushing events.
Please also check the pkg-message and the changelogs for further info.
20190927:
AFFECTS: users of emulators/qemu-devel
AUTHOR: bofh@FreeBSD.org
qemu-devel has been updated to 4.1.0 and 4.0.0 has been merged into a new port
emulators/qemu40. If you want to stick with 4.0.X branch, simply use:
# portmaster -o emulators/qemu-devel emulators/qemu40
20190927:
AFFECTS: users of XFCE desktop (x11-wm/xfce4)
AUTHOR: madpilot@FreeBSD.org
Due to changes in the XFCE 4.14 metaport, systems could end up with
both xscreensaver and xfce4-screensaver installed and enabled
simultaneously.
This can cause conflicts and problems unlocking the screen.
To avoid problems, please make sure to have only one enabled by
going to the Application Autostart tab of the Session and Startup
settings applet and enable only one Screensaver there.
Some further information can be found in the xfce4-session
pkg-message displayed on installation and upgrade.
20190920:
AFFECTS: users of net-mgmt/pushgateway
AUTHOR: 0mp@FreeBSD.org
The persistent storage format used by pushgateway in the latest version
is not backwards compatible. See the pushgateway changelogs for details.
20190911:
AFFECTS: users of security/bastillion
AUTHOR: netchild@FreeBSD.org
The datastore of bastillion needs to be updated:
java -jar $PREFIX/jetty_bastillion/upgrade/bastillion-upgrade-3.08.00.jar \
$PREFIX/jetty_bastillion/bastillion/WEB-INF/classes/BastillionConfig.properties
20190909:
AFFECTS: users of lang/ruby25
AUTHOR: mfechner@FreeBSD.org
The default ruby version has been updated from 2.5 to 2.6.
If you compile your own ports you may keep 2.5 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.5 as default version
#
DEFAULT_VERSIONS+=ruby=2.5
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you do not use pkg, please check entry 20190420.
The description there should also work for this version.
20190906:
AFFECTS: users of devel/py-fabric
AUTHOR: dbaio@FreeBSD.org
Fabric (devel/py-fabric) was upgraded to 2.5.0, Fabric (2+) represents
a near-total reimplementation and reorganization of the software.
Fabric 2 is not at 100% feature parity with 1.x! Some features have been
explicitly dropped, but others simply have not been ported over yet,
either due to time constraints or because said features need to be
re-examined in a modern context.
More information at:
https://www.fabfile.org/upgrading.html#upgrading
https://www.fabfile.org/upgrading.html#upgrade-specifics
If you would like to keep using 1.x, please run the following command to
update pkg database:
pkg set -n py27-fabric:py27-fabric1
pkg set -o devel/py-fabric:devel/py-fabric1
20190830:
AFFECTS: users of www/gitlab-ce
AUTHOR: mfechner@FreeBSD.org
Make sure you upgrade your PostgreSQL to version 11 as described in 20190829,
before you upgrade your gitlab-ce version.
Gitlab-ce 12.1 needs at least PostgreSQL version 9.6.
After this you can follow the usual upgrade guide:
https://gitlab.fechner.net/mfechner/Gitlab-docu/blob/master/update/12.0-12.1-freebsd.md
20190829:
AFFECTS: users of databases/postgresql* and other software using PostgreSQL to run
AUTHOR: tz@FreeBSD.org
The default version of PostgreSQL has been switched from 9.5 to 11.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 9.5.19, your
files are named according to this.
# service postgresql stop
# pkg create postgresql95-server postgresql95-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql95-server-9.5.19.txz -C /tmp/pg-upgrade
# tar xf postgresql95-contrib-9.5.19.txz -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql95-server databases/postgresql95-contrib databases/postgresql95-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql11-server databases/postgresql11-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql11-server databases/postgresql11-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql11-server databases/postgresql11-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data11 -U pgsql"
# chown -R postgres /usr/local/pgsql/data/
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /usr/local/pgsql/data/ -B /usr/local/bin/ -D /var/db/postgres/data11/ -U pgsql "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) The default user changed from "pgsql" to "postgres". The migration steps above preserve
the "pgsql" database user while the database daemon is now executed as the "postgres" FreeBSD user.
2) The default data dir changed from "/usr/local/pgsql/data/" to "/var/db/postgres/data11/"
3) If you use non-default initdb options, you have to adjust the initdb-command accordingly
20190816:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
Riak support has been removed by upstream. For update instructions from
19.05, please refer to:
https://docs.ejabberd.im/admin/upgrade/from_19.05_to_19.08/
20190812:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.30. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, follow the
instructions in entry 20161103, it should still be the same.
20190801:
AFFECTS: users of www/ot-recorder
AUTHOR: dvl@FreeBSD.org
The data directory has moved from /var/spool/owntracks to
/var/db/owntracks
Be sure to stop otrecorder, move the directory, and start otrecorder.
service ot-recorder stop
cd /var/spool
mv owntracks /var/db
service ot-recorder start
20190728:
AFFECTS: users of net-im/py-matrix-synapse
AUTHOR: kai@FreeBSD.org
The support for Python 2.7 has been dropped with the 1.1.0 release of
net/py-matrix-synapse.
Users that still use the Python 2.7 version of net-im/py-matrix-synapse
should switch to a newer Python version, e.g. 3.6, which is the default
Python version since April 2019.
20190717:
AFFECTS: users of net-p2p/zetacoin and net-p2p/zetacoin-nox11
AUTHOR: daniel@morante.net
Zetacoin will default to using modern versions of BDB (5.x or 6.x) when
the WALLET option is selected. See pkg-help for explanation.
The zetacoin-nox11 slave port was renamed to zetacoin-daemon to align
with the net-p2p/bitcoin format.
The zetacoin-cli and zetacoin-tx utilities have been re-packaged into
a separate port. If you require these programs, or use the zetacoin-cli
program to access the daemon or the GUI, install net-p2p/zetacoin-utils
to reinstall them.
20190717:
AFFECTS: users of sysutils/py-borgmatic
AUTHOR: egypcio@FreeBSD.org
The default location for borgmatic's configurations changed. We moved it
from '/etc/borgmatic' to '/usr/local/etc/borgmatic' in order to follow
recommended standards used on FreeBSD.
20190710:
AFFECTS: users with DEFAULT_VERSIONS+=linux=c6 or c6_64 in /etc/make.conf
AUTHOR: tijl@FreeBSD.org
On amd64 adding DEFAULT_VERSIONS+=linux=c6 to /etc/make.conf made Linux
infrastructure ports (linux_base-c6 and linux-c6*) install i386 CentOS 6
packages. Using c6_64 instead of c6 made them install mixed amd64/i386
CentOS 6 packages and allowed Linux application ports to install amd64
binaries when available. The i386-only configuration was only useful for
users of x11/nvidia-driver* which didn't provide Linux amd64 emulation
until recently.
With x11/nvidia-driver* now supporting Linux amd64 there's no longer a
need for i386-only Linux on amd64 so DEFAULT_VERSIONS+=linux=c6 has been
changed to make Linux infrastructure ports install mixed amd64/i386
CentOS 6 packages, like c6_64 before, and support for c6_64 has been
removed.
Users with DEFAULT_VERSIONS+=linux=c6 should reinstall linux_base-c6 and
all packages that depend on it. A list of dependent packages can be
obtained with the following command:
pkg info -r linux_base-c6
Users with DEFAULT_VERSIONS+=linux=c6_64 only need to replace c6_64 with
c6 in /etc/make.conf.
Users of x11/nvidia-driver* should upgrade to FreeBSD 11.3 or 12.0 if
they want to run Linux amd64 OpenGL programs. If you are running an
older version you may want to postpone installing or updating Linux
application ports until you find the time to upgrade because application
ports may install amd64 binaries now. Infrastructure ports are safe to
reinstall, and so is x11/nvidia-driver*.
On i386 nothing has changed.
20190707:
AFFECTS: users of www/gitlab-ce
AUTHOR: mfechner@FreeBSD.org
You must at first upgrade to version 11.11.5 before you can upgrade
to version 12.
Support for MySQL will be dropped with next version.
Make sure you use at least PostgreSQL version 9.6.
Follow the normal upgrade manual that can be found here:
https://gitlab.fechner.net/mfechner/Gitlab-docu/blob/master/update/11.11-12.0-freebsd.md
20190705:
AFFECTS: users of net/serviio which bought a license for the non-free features
AUTHOR: netchild@FreeBSD.org
Version 2 of serviio needs a new license file. Updating without a new license
file will disable the non-free features.
20190701:
AFFECTS: users of databases/mysql56-(server|client)
AUTHOR: ale@FreeBSD.org
The default MySQL version has been updated from 5.6 to 5.7.
If you compile your own ports you may keep 5.6 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep MySQL 5.6 as default version
#
DEFAULT_VERSIONS+=mysql=5.6
If you wish to update to the new default version, you need to first stop any
running server instance. Then, you will need to follow these steps, depending
on installed packages.
# pkg set -o databases/mysql56-client:databases/mysql57-client
# pkg set -o databases/mysql56-server:databases/mysql57-server
# pkg upgrade
20190630:
AFFECTS: users of net/samba410
AUTHOR: timur@FreeBSD.org
If you used Samba in AD/DC mode with the previous versions of the port on UFS2
backed storage you have to add usage of vfs_freebsd VFS module for at least
SYSVOL share and configure it to use 'legacy' mode(see manpage).
The reason behind this is that previous versions Samba port used a hack to
workaround broken mapping of Linux security and trusted extended attributes
into FreeBSD namespace. In particular, essential security.NTACL attribute
was replaced with the user.NTACL and placed in a insecure USER namespace.
This port dropped this hack in favor of vfs_freebsd module, which should
provide more controlled way of such a mapping.
To maintain the compatibility with the previous installations on UFS2 storage
(as ZFS uses it's own way of mapping SYSVOL, thanks to the iXsystems patches)
the vfs_freebsd module provides 'legacy' mode that implements old functionality.
For the fresh installations it is recommended to use 'secure' mode of operations
for this module and use it as a global vfs objects.
Caution: The given module is still considered EXPERIMENTAL.
20190630:
AFFECTS: users of net/samba410, net/samba4[6-8] and devel/talloc?, devel/tevent?, databases/tdb?, databases/ldb*
AUTHOR: timur@FreeBSD.org
The port of the new version of Samba 4.10 is introduced. Due necessarily
to keep backwards compatibility for the legacy samba4[6-8] ports the
upgrade procedure is a bit convoluted.
You are safe to perform fresh new install of samba410 port. In case you
are upgrading from the previous versions of Samba, please use the
following procedure:
0. Take backups of all the relevant files, in particular PREFIX/etc/smb4.conf
and /var/db/samba4/ subdirectory. Keep in mind that files there (may)
have extended attributes, so use appropriate tools to preserve them.
1a. If you haven't updated Samba between 20190619 and 20190630 then next
step should be as simple as:
portmaster -o net/samba410 net/samba48
1b. If you have been affected by the archiving legacy versions of
Samba-related libraries for legacy versions of Samba, which happened
in the given time frame, then you need to reverse operation from the
20190619 entry:
for users of portmaster:
portmaster -o devel/talloc devel/talloc1
portmaster -o devel/tevent devel/tevent1
portmaster -o databases/tdb databases/tdb1
portmaster -o net/samba410 net/samba48
for users of portupgrade:
portupgrade -o devel/talloc devel/talloc1
portupgrade -o devel/tevent devel/tevent1
portupgrade -o databases/tdb databases/tdb1
portupgrade -o net/samba410 net/samba48
20190619:
AFFECTS: users of samba4[6-8] and devel/talloc, devel/tevent, databases/tdb, databases/ldb*
AUTHOR: timur@FreeBSD.org
To introduce samba410(we deliberately skip samba49 due the complexity of handling)
and to drop dependency on deprecated Python 2.7, Samba supplementary libraries
talloc, tevent and tdb were split into current Python 3 compatible versions
and legacy ones, with the suffix "1".
Old versions of Samba were changed to depend on the legacy supplementary libraries,
so if you need to install samba46, samba47 or samba48 over previous Samba
installations you need to downgrade supplementary libs with the following commands:
for users of portmaster:
portmaster -o devel/talloc1 devel/talloc
portmaster -o devel/tevent1 devel/tevent
portmaster -o databases/tdb1 databases/tdb
portmaster -r talloc1
for users of portupgrade:
portupgrade -o devel/talloc1 devel/talloc
portupgrade -o devel/tevent1 devel/tevent
portupgrade -o databases/tdb1 databases/tdb
portupgrade -fr devel/talloc1
20190613:
AFFECTS: users of www/qt5-webengine
AUTHOR: kai@FreeBSD.org
Users that upgrade www/qt5-webengine without using pkg/poudriere might
experience failures due to conflicts with the installed version of 5.12.2.
In that case, pkg delete -f the qt5-webengine package before building
the updated version.
20190611:
AFFECTS: users of net/routinator
AUTHOR: rodrigo@FreeBSD.org
Release 0.4.0 fundamentally changes the command line options for
running the server and introduces a new way to initialize the local RPKI
repository used by Routinator.
If you have been using previous releases, you will likely have to adjust
your tooling. We apologize for this, but we also feel that the new commands
are more intuitive and logical.
20190604:
AFFECTS: users of net/samba47
AUTHOR: antoine@FreeBSD.org
The default version of samba has been switched from 4.7 to 4.8.
Upgrade instructions:
For package users having samba47 installed indirectly (as a dependency):
# pkg upgrade
For package users having samba47 installed directly (leaf port):
# pkg upgrade
# pkg install samba48
For ports users:
If you want to keep samba47, add DEFAULT_VERSIONS+= samba=4.7 to make.conf
If you want to upgrade to samba48, remove samba47:
# pkg delete -f samba47
Portmaster users:
# portmaster net/samba48
# portmaster -a
Portupgrade users:
# portinstall net/samba48
# portupgrade -a
20180601:
AFFECTS: www/tt-rss
AUTHOR: dereks@lifeofadishwasher.com
tt-rss now uses php intl for extension; a web server reload
will be required if intl extension isn't already loaded.
20190522:
AFFECTS: users of sysutils/graylog
AUTHOR: dch@FreeBSD.org
The port has been updated to the latest stable version 3.0.2, which
includes more plugins by default, but also requires manual changes to
graylog's configuration files, possibly port and URL changes, such as
X-Graylog-Server-URL settings, and elasticsearch must be >= 5.
The location of configuration files has been amended to align with the
official distribution files and locations.
After upgrading, manually review and merge changes from your
/usr/local/etc/graylog/server/server.conf into
/usr/local/etc/graylog/graylog.conf
Consult https://www.graylog.org/post/announcing-graylog-v3-0-ga for
further details.
20190506:
AFFECTS: users of www/gitea
AUTHOR: stb@lassitu.de
Gitea requires the addition of another secret to the config file in order
to start up. Either manually add JWT_SECRET to the
${PREFIX}/etc/gitea/conf/app.ini config file (see app.ini.sample), or allow
Gitea to make the change for you by making the config file writable to the
git user.
20190424:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v12.0.0, the latest
upstream release. This is a major release, including many significant
changes. Users are encouraged to read the release announcements before
upgrading:
https://nodejs.org/en/blog/release/v12.0.0/
20190423:
AFFECTS: users of www/gitlab-ce
AUTHOR: mfechner@FreeBSD.org
The directory where all repositories and ssh permissions are stored
was changed from /usr/home/git back to /usr/local/git, to match again the
recommended standards on FreeBSD.
This will cause now some other git management packages to collide with
gitlab. Make sure you migrate all you git repositories to gitlab first,
before you continue.
Make sure /usr/local/git/repositories and /usr/local/git/.ssh are not
existing!
Otherwise the next commands can break your installation for managing
git repositories within gitlab and with your other gitlab management
software!
You must move the old files to the new location with:
# service gitlab stop
# mv /usr/home/git /usr/local/
# pkg upg
Make sure you update your config files, diff shows you what you maybe
must change:
# cd /usr/local/www/gitlab-ce
# git diff config/gitlab.yml.sample config/gitlab.yml
# cd /usr/local/share/gitlab-shell/
# git diff config.yml.sample config.yml
# cd /usr/local/share/gitaly
# git diff config.toml.sample config.toml
# Change home directory of user git back to /usr/local/git
# vipw
The line should now looks like:
git:*:211:211::0:0:gitosis user:/usr/local/git:/bin/sh
If you do an upgrade of gitlab follow the upgrade guide.
If not, just start gitlab again with:
# service gitlab start
20190422:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.9 of LibreSSL.
The shared library versions of the libraries have been bumped.
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20190421:
AFFECTS: users of databases/cego
AUTHOR: pi@FreeBSD.org
To upgrade from cego 2.39.16 to 2.44.1, you need to export to xml before
the upgrade and import from xml after the upgrade, because the internal
storage has changed for some types.
Use these steps:
- export your database while it runs, see
http://www.lemke-it.com/litexec?request=pubcegodoc&user=&lang=en&section=cgdoc_database_running.html#tsimpexp_mode
for details.
- stop the database
service cego stop
- upgrade the port/package
- re-create the database
cego --mode=create --tableset=<database> --dbxml=<database>.xml
- import the database
cego --mode=xmlimport --tableset=<database> \
--dbxml=<database>.xml --impfile=export.xml --doLogging
- modify /etc/rc.conf by adding
cego_<database>_cpdump="YES"
cego_<database>_cleanup="YES"
- start the database
service cego start
20190420:
AFFECTS: users of lang/ruby24
AUTHOR: mfechner@FreeBSD.org
The default ruby version has been updated from 2.4 to 2.5.
If you compile your own ports you may keep 2.4 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.4 as default version
#
DEFAULT_VERSIONS+=ruby=2.4
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby25 lang/ruby24
# portmaster -R -r ruby-2.5
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby24:lang/ruby25
# portupgrade -x ruby-2.5.\* -fr lang/ruby25
20190419:
AFFECTS: users of emulators/qemu
AUTHOR: bofh@FreeBSD.org
qemu 2.X version has been moved to qemu2. If you would like to use
2.X you should use qemu2. Otherwise you can use the new stable
upstream branch of 3.0.X.
Portmaster users will need to run this command:
portmaster -o emulators/qemu2 emulators/qemu
20190410:
AFFECTS: users of python
AUTHOR: antoine@FreeBSD.org
Default version of python was switched to 3.6.
For ports users wanting to keep version 2.7 as default,
add DEFAULT_VERSIONS+= python=2.7 to make.conf
20190328:
AFFECTS: www/firefox-i18n, www/firefox-esr-i18n, mail/thunderbird-i18n, www/seamonkey-i18n
AUTHOR: gecko@FreeBSD.org
Separate packages for localization packs are no longer supported.
Firefox 65+ has in-browser menu while Firefox ESR60, Thunderbird 60
or SeaMonkey 2.49 should download preferred .xpi manually. Refer to
the following article (including previous revisions) how to do this.
https://support.mozilla.org/kb/use-firefox-another-language
20190328:
AFFECTS: users of www/qt5-webengine
AUTHOR: kde@FreeBSD.org
Users that upgrade www/qt5-webengine without using pkg/poudriere might
experience failures due to conflicts with the installed version of 5.9.5.
In that case, pkg delete -f the qt5-webengine package before building
the updated version.
20190314:
AFFECTS: users of mail/rspamd, mail/rspamd-devel
AUTHOR: vsevolod@FreeBSD.org
User and group that rspamd run as are changed from nobody:nobody to
rspamd:rspamd. Unless it is clean install you need to execute following
command.
# chown -R rspamd:rspamd /var/db/rspamd /var/log/rspamd /var/run/rspamd
20190311:
AFFECTS: users of x11/xorg, x11-fonts/mkfontscale, x11-fonts/mkfontdir
AUTHOR: zeising@FreeBSD.org
The x11-fonts/mkfontdir port has been removed and the functionality
has been merged into x11-fonts/mkfontscale. This might cause issues
with upgrading. If you get conflicts between mkfontscale and mkfontdir
please remove mkfontdir before upgrading.
To do this, simply run the following:
pkg delete -f mkfontdir
20190311:
AFFECTS: users of www/igal2
AUTHOR: rodrigo@freebsd.org
www/igal2 2.2-1 is now built with graphics/ImageMagick6-nox11
and don't install the ImageMagick X11 dependencies anymore.
A build option allows you to restore the previous behaviour.
20190303:
AFFECTS: users of x11-fonts/noto*
AUTHOR: sunpoet@FreeBSD.org
Google Noto Fonts family has been converted to several ports. x11-fonts/noto
is a meta port which includes 1 old port and 5 new ports as follows:
- x11-fonts/noto-basic (was noto-lite): basic fonts set with emoji
- x11-fonts/noto-extra: extra fonts set
- x11-fonts/noto-jp: Japanese fonts set
- x11-fonts/noto-kr: Korean fonts set
- x11-fonts/noto-sc: Simplified Chinese fonts set
- x11-fonts/noto-tc: Traditional Chinese fonts set
20190302:
AFFECTS: users of sysutils/paladin
AUTHOR: Ryan Westlund <rlwestlund@gmail.com>
The way paladin parses its config file has changed, please
check the provided sample config.
20190227:
AFFECTS: users of security/softether, security/softether-devel
AUTHOR: meta@FreeBSD.org
These ports' bridge, client, server daemon unintendedly had spit out
chain_certs (certificate chain) directory on libexec directory until
r494024.
If your ${PREFIX}/libexec/softether/chain_certs directory is empty, you
can remove the directory safely. If the directory is not empty, move it
to ${SE_DBDIR} when upgrading softether. Following commands should help:
service softether_(bridge|client|server) stop
(portmaster, portupgrade or pkg upgrade)
mv ${PREFIX}/libexec/softether/chain_certs ${SE_DBDIR}/
service softether_(bridge|client|server) start
With the default Makefile settings, ${SE_DBDIR} is set to /var/db/softether.
20190224:
AFFECTS: users of security/gnutls
AUTHOR: tijl@FreeBSD.org
GnuTLS now looks for its configuration files in PREFIX/etc (/usr/local/etc)
instead of /etc. If the following files exist they have to be moved. On a
default installation these files do not exist.
/etc/gnutls/default-priorities
/etc/gnutls/pkcs11.conf
/etc/tpasswd
/etc/tpasswd.conf
20190215:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
If you've mod_mam enabled with compress_xml set to true, then you're affected
by bug where the XML namespace, and tag elements get interchanged in the MAM cache
which results in invalid XML, and causing XMPP clients to disconnect. For more
details, please refer to: https://github.com/processone/ejabberd/issues/2744
This upgrade contains the patch that fixes the problem going forward. For fixing already
affected users, you'll need to wipe off the MAM cache for the affected users:
sudo -u ejabberd -H ejabberdctl remove_mam_for_user <user> <server>
20190207:
AFFECTS: users of net-mgmt/mk-livestatus
AUTHOR: egypcio@FreeBSD.org
The default Nagios version supported by net-mgmt/mk-livestatus changed
from Nagios 3 to Nagios 4 - the respective Nagios package was added to
net-mgmt/mk-livestatus' runtime dependencies.
If you still need support for Nagios 3 you just need to change the
options for net-mgmt/mk-livestatus and compile the port yourself.
20190202:
AFFECTS: users of archivers/urbackup-server
AUTHOR: freebsd@coombscloud.com
Some of the port's sources previously included absolute references to /etc/urbackup.
The upgrade now changes these references to ${PREFIX}/etc/urbackup. If you have
placed any configuration files within /etc/urbackup, these should be relocated to
${PREFIX}/etc/urbackup.
20190130:
AFFECTS: users of sysutils/password-store
AUTHOR: rene@FreeBSD.org
password-store now stores plugins in ${PREFIX}/libexec instead of ${PREFIX}/lib.
Ensure to move your own extensions there too and update your scripts to avoid
breakage.
20190124:
AFFECTS: users of sysutils/rubygem-fluentd, sysutils/fluent-bit
AUTHOR: girgen@FreeBSD.org
The fluentd port has been upgraded from the 0.12 line to 1.3.3. The upgrade
is mostly non-disruptive since there is a backward compatibility with 0.12
plugins and configuration files, but care should be taken about the order of
server upgrades since fluentd 1.x is unable to send it's data to version 0.12
instances. You should carefully read
https://docs.fluentd.org/v1.0/articles/update-from-v0.12 before performing
any upgrade activities.
20190120:
AFFECTS: users of mail/fetchmail
AUTHOR: mandree@FreeBSD.org
The fetchmail port no longer offers the X11 option and no longer
depends on Python. The corresponding fetchmailconf Python program has now
been split out into a separate port or package, so that fetchmail itself
will no longer require Python.
Users who wish to use fetchmailconf should install the new fetchmailconf
port or package.
20190119:
AFFECTS: users of german/webalizer2, japanese/webalizer, polish/webalizer2, portuguese/webalizer-pt_BR, portuguese/webalizer-pt_PT, ukrainian/webalizer, www/geolizer, www/webalizer
AUTHOR: dinoex@FreeBSD.org
The option GEOIP has been changed to used the new database.
Either copy GeoLite2-Country.mmdb in the working directory,
or set the GeoIPDatabase option to the location of the file.
20190114:
AFFECTS: users of graphics/qgis
AUTHOR: rhurlin@gwdg.de
GIS 3.4 LTR, the first long-term release (LTR) of QGIS 3, has landed
in the FreeBSD ports tree. It will also replace the previous 2.18 LTR
in the QGIS package repositories in February 2019 [1].
Beside, the latest Qt4 version 4.8.7 has been EOL since December 2015
and its expiration date on FreeBSD is set to March, 15th 2019.
Because QGIS 2 is based on Qt4 and Python2, it was decided to not create
a legacy port for QGIS 2, after graphics/qgis changed to QGIS 3.
For users moving over from the 2.18 LTR there is a huge list of new
features and impactful changes in this new 3.4 LTR version. Most notably
3.x plugins are incompatible with 2.x plugins, so please review your
plugin usage carefully. Before moving over, if you have not already
done so, take a look at the changelogs from versions 3.0, 3.2, and
3.4 [2][3][4] to understand the full scope of changes in the 3.x release.
[1] https://qgis.org/en/site/getinvolved/development/roadmap.html#release-schedule
[2] http://changelog.qgis.org/en/qgis/version/3.0.0/
[3] http://changelog.qgis.org/en/qgis/version/3.2.0/
[4] http://changelog.qgis.org/en/qgis/version/3.4-LTR/
20190114:
AFFECTS: x11-wm/sway
AUTHOR: jbeich@FreeBSD.org
swayidle and swaylock split out into x11/swayidle and x11/swaylock.
Check your sway config and install those if required.
20190113:
AFFECTS: users of net/GeoIP
AUTHOR: adamw@FreeBSD.org
Maxmind no longer provides geolocation data in the legacy format used
by net/GeoIP. All GEOIP-related OPTIONS have been removed, and all
GeoIP-dependent ports will be removed soon.
Where possible, you must switch to net/libmaxminddb, which uses the
newer (and fully supported) GeoIP 2 format. Unfortunately, this is
not a drop-in replacement. To fetch the GeoIP 2 geolocation databases,
whether the free or paid versions, you must use net/geoipupdate
(pkg install geoipupdate).
The legacy database is no longer available, and we cannot distribute
it by the Maxmind license, so the legacy GeoIP format is essentially
dead.
20190108:
AFFECTS: users of databases/mysql-connector-java
AUTHOR: matthew@FreeBSD.org
The databases/mysql-connector-java port has been updated to 8.0.13,
which requires a minimum of Java 1.8, so dropping support for Java
1.6 and 1.7. Users of those versions of Java should substitute the
databases/mysql-connector-java51 port which remains at version
5.1.47
20190103:
AFFECTS: users of multimedia/vlc*
AUTHOR: riggs@FreeBSD.org
The multimedia/vlc port has been upgraded to 3.0.5, the latest upstream
release. Subsequently, multimedia/vlc-qt4 and multimedia/vlc3 have been
retired and removed from the ports tree. Users who previously used
multimedia/vlc3 might want to switch to multimedia/vlc with the following
commands:
# pkg install multimedia/vlc
or
# portmaster -o multimedia/vlc multimedia/vlc3
or
# portupgrade -o multimedia/vlc multimedia/vlc3
20190102:
AFFECTS: users of net/serviio
AUTHOR: netchild@FreeBSD.org
If you have customized your etc/serviio/profile.xml you need to review
and merge changes from the profile.xml.sample file, else you may not be
able to watch mkv files.
20181228:
AFFECTS: users of devel/trio
AUTHOR: rodrigo@freebsd.org
Since trio 1.16-1, the shared lib previously misnamed libtrio.so.2.0.0
is now named libtrio.so.2 and the symlink libtrio.so is created.
20181222:
AFFECTS: users of net/ntopng
AUTHOR: madpilot@FreeBSD.org
Since ntopng 3.7, for security reasons, the default setting for
the data directory has been changed to "/var/db/ntopng", and the
default user has been changed to "ntopng". This new directory is
created automatically by the port/package with correct permissions.
In order to maintain backward compatibility, if you are already
using "/var/tmp/ntopng" as data directory, ntopng keeps using that
folder, owned by "nobody". This said, using the old defaults is not
recommended and a manual action is required in order to migrate to
the new settings, unless you are already using a custom directory:
# service ntopng stop
# mv /var/tmp/ntopng/* /var/db/ntopng/
# chown -R ntopng:ntopng /var/db/ntopng
# service ntopng start
Please check the upstream FAQ for reference:
https://www.ntop.org/support/faq/migrate-the-data-directory-in-ntopng/
20181218:
AFFECTS: users of misc/openhab2
AUTHOR: netchild@FreeBSD.org
If you upgrade from a previous version, make a backup of
/var/db/openhab2
and run
%%PREFIX%%/libexec/openhab2/runtime/bin/update.freebsd
Config specific info (changes from 2.3.0 to 2.4.0):
Astro Binding: The 'kilometer' and 'miles' channels have been replaced
by a new 'distance' channel
Jeelink Binding: The 'currentWatt' and 'maxWatt' channels have been
replaced with 'currentPower' and 'maxPower' channels
WeatherUnderground Binding: A bridge has been added on top of the
current things, you need to add a bridge
containing your api-key.
ZWave Binding: Major changes have been merged to support features
such as security. All things must be deleted and
re-added. Refer to
https://community.openhab.org/t/zwave-binding-updates/51080
for further information.
Synop Binding is now using UoM. 'wind-speed-ms' and 'wind-speed-knots'
channels have been replaced by a single 'wind-speed'
channel.
Amazonechocontrol Binding: The account thing does not have settings
anymore. You have to login at amazon
once again through the proxy server
http(s)://<YourOpenHAB>/amazonechocontrol
Milight Binding: The various available bulb types do not appear in
the Paper UI Inbox anymore. The correct bulb need
to be added manually. The bulb "zone" is now a
configuration. Bulb Things need to be recreated
to apply this change.
Hue emulation: The item to hue ID mapping is no longer stored in
files, but in the openHAB storage service. You need
to rediscover "devices" in all services that use the
hue emulation (Amazon Echo, Google Home, etc).
20181215:
AFFECTS: users of sysutils/graylog
AUTHOR: dch@FreeBSD.org
The dependent ports for ElasticSearch and MongoDB have both changed,
and upstream changes to the configuration file may require minor
changes to work correctly. Refer to the new sample files installed
alongside the port for reference:
server.conf
log4j.xml
graylog_logging.xml
20181213:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.28. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, follow the
instructions in entry 20161103, it should still be the same.
20181212:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
There are some new features added in ejabberd 18.12, esp. related to
bookmarks, and XML compression in message archive storage. Please
refer to: https://blog.process-one.net/ejabberd-18-12/
20181211:
AFFECTS: users of news/inn when upgrading to FreeBSD 12
AUTHOR: naddy@FreeBSD.org
When upgrading from FreeBSD 11 to 12, a change in the size of the
ino_t type causes a binary incompatibility in the overview database
if the default tradindexed format is used.
After upgrading the inn package, remove the overview/group.index
file and regenerate the history and overview database with
makehistory(8) before starting innd.
# echo '. /usr/local/news/lib/innshellvars && \
rm -f $OVERVIEWDIR/group.index && \
$NEWSBIN/makehistory -O -s `wc -l <$HISTORY`' | \
su -fm news -c '/bin/sh -s'
20181209:
AFFECTS: users of DRM ports other than graphics/drm-kmod
AUTHOR: jmd@FreeBSD.org
In order to facilitate future porting efforts and help in supporting multiple
FreeBSD versions, the DRM ports other than drm-kmod (graphics/drm-stable-kmod,
graphics/drm-next-kmod, graphics/drm-devel-kmod) have been renamed to
include the FreeBSD version they are designed for.
drm-stable-kmod is drm-fbsd11.2-kmod
drm-next-kmod is drm-fbsd12.0-kmod
drm-devel-kmod is drm-current-kmod
20181209
AFFECTS: users of devel/geany and devel/geany-plugins
AUTHOR: madpilot@FreeBSD.org
Geany and its plugins port have been moved to gtk3 and a new gtk2
flavor has been added. The gtk2 flavor has a -gtk2 suffix added to the
package name.
If you want to stay with the gtk2 version you need to use "pkg install"
to install the new gtk2 flavor, pkg will automatically deinstall the
gtk3 flavors.
If using port, to maintain the gtk2 version, you will need to deinstall
geany and its plugins and reinstall specifying the gtk2 flavor.
Note that the following plugins are not available if using the new
gtk3 flavor:
* geany-plugin-debugger
* geany-plugin-devhelp
* geany-plugin-geanypy
* geany-plugin-multiterm
* geany-plugin-scope
20181208:
AFFECTS: users of misc/openhab2
AUTHOR: netchild@FreeBSD.org
If you upgrade from a previous version, make a backup of
/var/db/openhab2
and run
%%PREFIX%%/libexec/openhab2/runtime/bin/update.freebsd
Config specific info (changes from 2.2.0 to 2.3.0):
Nest Binding: The 'camera' Thing Type now has channel groups.
Add 'camera#' before the channel ID in the channel UID of
existing camera channels. The 'time_to_target_mins' channel
of the 'thermostat' Thing Type is renamed to 'time_to_target'
Oceanic Binding: The 'softener' Thing Type no longer exists and is replaced
by the 'serial' and 'ethernet' Thing Types
Yamaha Receiver Binding: The configuration parameter names now use lower
camel case convention. Change 'HOST' to 'host',
'PORT' to 'port' etc
20181124:
AFFECTS: users of sysutils/munin-master, sysutils/munin-node, www/owncloud, mail/mailman, net/ntpa
AUTHOR: woodsb02@FreeBSD.org
The newsyslog.conf(5) filename installed by the port has been changed:
OLD: ${PREFIX}/etc/newsyslog.conf.d/${PORTNAME}
NEW: ${PREFIX}/etc/newsyslog.conf.d/${PORTNAME}.conf
Any file found at the old location will be automatically moved to the new
location. This will ensure log rotation will continue to work after change
r340318 to FreeBSD base, where the default newsyslog configuration now only
includes filenames that end with '.conf' and do not begin with '.'.
If you use provisioning/configuration management tools to create or edit this
file, you will need to change their configuration to use the new filename.
20181111
AFFECTS: users of graphics/mesa-libs
AUTHOR: jbeich@FreeBSD.org
Wayland support has been enabled in ports where it doesn't exclude
X11 support in order to make the binary packages usable with Wayland
compositors. If you get strange build failures re-run "make config"
to pick up the new defaults. If the extra dependencies are not
desired add the following to make.conf:
OPTIONS_UNSET += WAYLAND
20181109
AFFECTS: users of security/ossec-hids-server
AUTHOR: dominik.lisiak@bemsoft.pl
The "ossechids_enable" rc variable has been renamed to "ossec_hids_enable".
If using database output, you need to recreate database using new schema
provided in /usr/local/share/doc/ossec-hids.
20181109
AFFECTS: users of security/ossec-hids-local
AUTHOR: dominik.lisiak@bemsoft.pl
The "ossechids_enable" rc variable has been renamed to "ossec_hids_enable".
If using database output, you need to recreate database using new schema
provided in /usr/local/share/doc/ossec-hids.
20181109
AFFECTS: users of security/ossec-hids-client
AUTHOR: dominik.lisiak@bemsoft.pl
The ossec-hids-client port has been renamed to ossec-hids-agent.
Portmaster users will need to run this command:
portmaster -o security/ossec-hids-agent security/ossec-hids-client
If the switch doesn't happen automatically for you, just delete the
ossec-hids-client package and install ossec-hids-agent.
The "ossechids_enable" rc variable has been renamed to "ossec_hids_enable".
20181104:
AFFECTS: users of sysutils/ansible*
AUTHOR: lifanov@FreeBSD.org
Default Ansible configuration location changed to LOCALBASE/etc/ansible
instead of a per-flavor directory. If you use system-wide Ansible
configuration, please migrate from a flavored directory to a common
one:
# mv /usr/local/etc/py27-ansible /usr/local/etc/ansible
20181031:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v11.0.0, the latest
upstream release. A new port, www/node10, has been created for the
v10.x LTS branch. Users wanting to stay on v10.x can replace www/node
with www/node8 with one of the following commands:
# pkg install www/node10
or
# portmaster -o www/node10 www/node
or
# portupgrade -o www/node10 www/node
20181022:
AFFECTS: users of lang/php71
AUTHOR: joneum@FreeBSD.org
The default version of PHP has been switched from 7.1 to 7.2.
If you use binary packages you should make a list of php packages
before running 'pkg upgrade':
# pkg info php7\* > ~/installed-php-ports-list
After the upgrade, check with such list if all your php extensions
are still installed, and reinstall them if needed.
If you use mod_php71 you need to deinstall it and install mod_php72.
20181020:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.8 of LibreSSL.
The shared library versions of the libraries have been bumped.
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20181018:
AFFECTS: users of security/hitch
AUTHOR: zi@FreeBSD.org
Hitch has been updated to run as the hitch user/group, instead of the
previous default of nobody/nobody. You should review your hitch
configuration to ensure that everything has been updated to reflect
this change.
20181014:
AFFECTS: users of sysutils/ansible
AUTHOR: lifanov@FreeBSD.org
Ansible has been updated to 2.7.0. Please follow the porting guide
to update the rulesets:
https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_2.7.html
If you wish to stay with 2.6 version, you can switch
to new sysutils/ansible2.6 port, which tracks stable 2.6 branch:
# pkg set -n ansible:ansible26
20181010:
AFFECTS: users of mail/courier-imap and other courier ports
AUTHOR: madpilot@FreeBSD.org
Courier-IMAP 5.0.0 added IMAP UTF8 support, and converted maildir
folders' names to Unicode.
Updating an existing system to Courier-IMAP 5.0, and later,
requires a manual one-time conversion of all existing maildirs
using the maildirmake command. See the maildirmake(1) manual page
for more information.
All other courier ports accessing maildirs also need to be updated
at the same time.
20181009:
AFFECTS: users of devel/pecl-xdebug*
AUTHOR: pizzamig@FreeBSD.org
xdebug 2.6.1 (devel/pecl-xdebug) is the new default version and it supports
PHP from 7.0 to 7.2 included.
If you're using PHP 5.6, the previous compatible xdebug version is still
available in devel/pecl-xdebug25
If you're using PHP 7.3, the only compatible xdebug version is available
in devel/pecl-xdebug-devel
20180930:
AFFECTS: users of DRM components
AUTHOR: jmd@FreeBSD.org
A metaport, graphics/drm-kmod, was introduced for users of both the LinuxKPI-
based DRM components as well as the legacy ones. It is recommended to use the
metaport from now on, which will select a recommended DRM version based on
the FreeBSD version.
20180924:
AFFECTS: www/libresonic-standalone
AUTHOR: jlh@FreeBSD.org
HTTPS support has been removed from the port, as it will be removed upstream:
https://github.com/Libresonic/libresonic/issues/125#issuecomment-256227104
In order to avoid strange behavior for users who are using this feature, the
rc.d script will fail fast if libresonic_ssl="YES". You should remove the
following variables from rc.conf(5): libresonic_ssl libresonic_ssl_keystore
libresonic_ssl_password.
# sed -i '' /libresonic_ssl/d /etc/rc.conf
Users needing SSL are encouraged to use an HTTP reverse-proxy. Example
configurations can be found here:
https://github.com/Libresonic/libresonic/issues/119
20180922:
AFFECTS: users of graphics/ilmbase, graphics/OpenEXR
AUTHOR: mandree@FreeBSD.org
The IlmBase package has been updated to 2.3.0.
The OpenEXR package has been renamed to openexr and updated to 2.3.0.
The PORTREVISION of all ports requiring either has been bumped to
ease the rebuilds, and where there were versions in the file names,
these have been removed from the *_DEPENDS lines for easier maintenance.
A full ports or package upgrade should just work.
If you are doing partial updates, be sure to rebuild and reinstall
all packages that require either of OpenEXR or ilmbase.
Normally, these can be listed by running:
# pkg info -q -r OpenEXR ilmbase | sort -u | xargs pkg info -q -o
20180905:
AFFECTS: users of lang/php56
AUTHOR: tz@FreeBSD.org
The default version of PHP has been switched from 5.6 to 7.1.
If you use binary packages you should make a list of php packages
before running 'pkg upgrade':
# pkg info php5\* > ~/installed-php-ports-list
After the upgrade, check with such list if all your php extensions
are still installed, and reinstall them if needed.
If you use mod_php56 you need to deinstall it and install mod_php71.
20180901:
AFFECTS: net/samba48
AUTHOR: timur@FreeBSD.org
Samba ports from now on are not dependent from the databases/ldb* ports,
as the link between Samba and LDB is too tight and each next major Samba
release requires it's own major LDB release. Please, remove installed
version of databases/ldb13 from your system with:
# pkg delete -f databases/ldb13
20180901:
AFFECTS: net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
As of version 1.42, to conform with man hier, logs and rrd files have
relocated outside the WWW directory. When upgrading from < 1.42 to more
recent versions, the following steps are required.
You must update config.php and manually relocate the rrd and log files.
Before upgrading, please stop librenms, update the configuration, and
relocate the files.
If you find graphs are not updating, fping >= 4.0 requires an IPv6
address. Adding an IPv6 address should fix graphing.
Please add these entries to config.php:
$config['installed_from_package'] = true;
$config['log_dir'] = '/var/log/librenms';
$config['rrd_dir'] = '/var/db/librenms/rrd';
To relocate the files:
mkdir /var/log/librenms /var/db/librenms
chown www:ww: /var/log/librenms /var/db/librenms
cd /usr/local/www/librenms
mv rrd /var/db/librenms/
mv logs/librenms.log /var/log/librenms/
rmdir logs
An application key is required. Please follow these steps to generate it:
cd /usr/local/www/librenms
cp -i .env.sample .env
You might need to set your database details in that file.
Then run:
php artisan key:generate
The output should look something like this:
**************************************
* Application In Production! *
**************************************
Do you really wish to run this command? (yes/no) [no]:
> y
Application key [base64:P62La9V........qw=] set successfully.
20180901:
AFFECTS: users of samba46
AUTHOR: antoine@FreeBSD.org
The default version of samba has been switched from 4.6 to 4.7.
Upgrade instructions:
For package users having samba46 installed indirectly (as a dependency):
# pkg upgrade
For package users having samba46 installed directly (leaf port):
# pkg upgrade
# pkg install samba47
For ports users:
If you want to keep samba46, add DEFAULT_VERSIONS+= samba=4.6 to make.conf
If you want to upgrade to samba47, remove samba46:
# pkg delete -f samba46
Portmaster users:
# portmaster net/samba47
# portmaster -a
Portupgrade users:
# portinstall net/samba47
# portupgrade -a
20180813:
AFFECTS: net/geoipupdate
AUTHOR: adamw@FreeBSD.org
There have been some breaking changes to the GeoIP.conf in version 3.0.0.
Read about the changes at
https://github.com/maxmind/geoipupdate/blob/master/ChangeLog.md
and either edit your GeoIP.conf as needed, or recreate it from
GeoIP.conf.sample.
20180810:
AFFECTS: databases/postgresql??-server
AUTHOR: girgen@FreeBSD.org
The PostgreSQL server packages are no longer built with support for the XML
datatype per default. To retain support for the XML datatype you should build
the port and check the XML option in the option dialog. The reason for this
is the bad security reputation of libxml2.
20180806:
AFFECTS: www/tt-rss
AUTHOR: thierry@FreeBSD.org
tt-rss now uses pdo_mysql/pgsql for database access; a web server reload
will be required if pdo ext. isn't installed.
20180804:
AFFECTS: net-mgmt/zabbix*-server
AUTHOR: dbaio@FreeBSD.org
The JAVAGW option was removed from the Zabbix Server and an additional slave
port was created, zabbix*-java, it installs only Zabbix Java Gateway files,
this way is possible to deploy a Zabbix Java Gateway without the need to
install Zabbix Server components.
If you are using the JAVAGW option on Zabbix Server, please, install now the
new zabbix*-java port.
20180803
AFFECTS: users of net/openntpd
AUTHOR: naddy@FreeBSD.org
The numerical ID of the "_ntp" user had to be moved after 12.0-CURRENT
(revision 336525) took over its value for a user "ntpd" that uses a
different privilege model.
To avoid clashes between the two users, please remove the openntpd
package, delete the old UID with
# pw userdel _ntp
and re-install openntpd.
20180731:
AFFECTS: users of audio/sndio
AUTHOR: tobik@FreeBSD.org
sndiod(8) will now use the default audio device /dev/dsp instead
of /dev/dsp0 if no device was specified.
The location of ~/.aucat_cookie has moved to ~/.sndio/cookie. If
you share audio devices via sndiod(8) on the network or between
local users, please migrate it manually to the new location to
guarantee a smooth upgrade.
20180731:
AFFECTS: users of x11/xorg and all ports with USE_XORG=*proto
AUTHOR: zeising@FreeBSD.org
The xorg *proto packages have all been merged into one package,
x11/xorgproto. This might cause issues with upgrading. If you
get conflicts between xorgproto and old *proto packages, please
remove the old package and install xorgproto again.
In order to remove all orphaned ports, including all *proto port,
the following can be used after the ports tree has been updated:
pkg version -l \? | cut -f 1 -w | grep -v compat | xargs pkg delete -fy
20180728:
AFFECTS: users who upgrade from security/kc to security/kc24
AUTHOR: pi@FreeBSD.org
The ondisk format changes from kc 2.3 to kc 2.4, so please
read the kc24 pkg-message file before the upgrade. It describes
how to create a backup, the xml dump and how to import the
xml dump afterwards.
20180725:
AFFECTS: users of textproc/ibus-typing-booster
AUTHOR: thierry@FreeBSD.org
Due to a migration from IBusConfig to GSettings, the old settings are
unfortunately lost, so one has to open the setup tool and recreate ones
favourite settings.
20180714:
AFFECTS: users of dns/dnsdist
AUTHOR: cpm@FreeBSD.org
After discussing with several users, we noticed that quite a lot of them
were not aware that enabling the dnsdist's console without a key, even
restricted to the local host, could be a security issue and allow privilege
escalation by allowing an unprivileged user to connect to the console and
execute Lua code as the dnsdist user. We therefore decided to refuse any
connection to the console until a key has been set, so please check that
you do set a key before upgrading if you use the console.
For further details read:
https://blog.powerdns.com/2018/07/10/dnsdist-1-3-2-released/
20180704:
AFFECTS: users of www/gitlab
AUTHOR: mfechner@FreeBSD.org
The gitlab port uses the package from gitlab.org instead of github.org.
For this the port was renamed from gitlab to gitlab-ce.
Please follow the instructions very carefully to not lose your data!
Not only the package was renamed, also the directory name changed.
You can find the current instruction here:
https://gitlab.fechner.net/mfechner/Gitlab-docu/blob/master/update/10.8-11.0-freebsd.md
Please note the update was only tested for an update from 10.8.5 to 11.0.2.
If your version of gitlab was released before 2014-03-13 you cannot update
to this version. You need to make an intermediate update to an earlier
version before.
20180701:
AFFECTS: users of devel/bats
AUTHOR: lifanov@FreeBSD.org
The devel/bats port has been renamed to devel/bats-core to match the
new upstream project.
20180630:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
In version 18.06, upstream has removed support for IRC transport.
20180625:
AFFECTS: users of PHP based applications like drush
AUTHOR: mfechner@FreeBSD.org
Flavors are being added to PHP applications. If you use PHP 5.6 you need:
# pkg set -n drush:drush-php56
For more details see 20180611.
20180612:
AFFECTS: users of the nox flavor of editors/emacs-devel
AUTHOR: jrm@FreeBSD.org
The package name for the nox flavor of editors/emacs-devel changed from
emacs-devel_nox to emacs-devel-nox. To install the new package, run
# pkg install emacs-devel-nox
pkg should remove the old and install the new package.
20180612:
AFFECTS: users of packages that depend on Emacs
AUTHOR: jrm@FreeBSD.org
With the release of Emacs version 26.1, the major version of editors/emacs
changed from 25 to 26, so the names of packages that depend on Emacs have also
changed. For example, pdf-tools-emacs25-0.80.79_1 is now called
pdf-tools-emacs26-0.80.79_1. The name change means simply running `pkg
upgrade` will not upgrade foo-emacs25-x to foo-emacs26-x.
To list the packages to upgrade, use
# pkg info \*emacs25\*
then install the new version for each with
# pkg install foo-emacs26
pkg should remove the old and install the new packages.
20180611:
AFFECTS: users of PHP based applications
AUTHOR: mat@FreeBSD.org
Flavors are being added to PHP applications. When a port is flavorized, pkg
needs to be told about the name change, for example, if PHP 5.6 is the one
you need:
# pkg set -n squirrelmail:squirrelmail-php56
Most port will have packages for all PHP versions present in the ports tree,
but some may not be compatible with a specific version.
To get the available flavors, pkg rquery can be used:
# pkg rquery %n mail/squirrelmail
squirrelmail-php56
squirrelmail-php70
squirrelmail-php71
squirrelmail-php72
20180602:
AFFECTS: users of net/frr
AUTHOR: olivier@FreeBSD.org
Due to regression detected in FRR version 4.0, port was renamed to frr4
to prepare re-introduction of frr3 port version.
To rename the installed package to match the new naming scheme, run:
# pkg set -n frr:frr4
20180529:
AFFECTS: users of textproc/ibus-typing-booster
AUTHOR: thierry@FreeBSD.org
Attention, this release merges all engines into one. Therefore, the
engine names had to change. The old engine names like "German - DE
(Typing Booster)", "Hindi - HI (Typing Booster)" don't exist anymore!
If one has entries for them in the Gnome Control Center or in
ibus-setup, one needs to remove these old entries and add the new
engine name "Other (Typing Booster)".
20180518:
AFFECTS: users of sysutils/ansible*
AUTHOR: lifanov@FreeBSD.org
Ansible ports are now flavored. Package names for Ansible changed
to include python version. Poudriere and package users don't need
to do anything.
To rename an installed package to match the new naming scheme,
for example, for ansible24, run:
# pkg set -n ansible24:py27-ansible24
20180514:
AFFECTS: users of www/gitlab
AUTHOR: mfechner@FreeBSD.org
Gitlab-pages support was removed as new version does not compile.
If you require gitlab-pages do not update to version 10.7.3 till it is
fixed upstream.
You can find the bug report here:
https://gitlab.com/gitlab-org/gitlab-pages/issues/143
20180513:
AFFECTS: users of net/xrdp
AUTHOR: meta@FreeBSD.org
net/xrdp has been updated from 0.6.2 to 0.9.6. There are significant
changes between these versions. You should consider backing up your
configuration files such as xrdp.ini and sesman.ini, and then migrate
configuration files by hand.
Regarding km-*.ini, don't use the old files. They can be safely replaced
with new ones.
20180507:
AFFECTS: users of math/suitesparse who build it locally
AUTHOR: yuri@FreeBSD.org
The suitesparse needs to be uninstalled before math/suitesparse can be
correctly built. This is true for the version 5.2.0 and prior versions.
20180505:
AFFECTS: users of www/gitea
AUTHOR: stb@lassitu.de
The www/gitea port no longer requires shell/bash. If you want to
stop using bash and deinstall the package, make sure to set the
configuration in etc/gitea/conf/app.ini, section [repository],
SCRIPT_TYPE to "sh". See app.ini.sample for an example.
20180501:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v10.0.0, the latest
upstream release. This is a major release, including many significant
changes. Users are encouraged to read the release announcements before
upgrading:
https://nodejs.org/en/blog/release/v10.0.0/
In particular, Node.js now depends on OpenSSL 1.1.0h, so the
BUNDLED_SSL option is enabled by default. Users can disable this
option when using security/openssl-devel as their default SSL library.
20180430:
AFFECTS: users of news/nntp
AUTHOR: dinoex@FreeBSD.org
The option INETD was removed. If you used inetd, please change the path
in /etc/inetd.conf from /usr/local/sbin/nntpd to /usr/local/libexec/nntpd.
20180428:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.7 of LibreSSL.
The shared library versions of the libraries have been bumped.
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20180427:
AFFECTS: users of sysutils/zrepl
AUTHOR: woodsb02@FreeBSD.org
The zrepl update to 0.0.3 includes the following breaking changes:
- Snapshots are automatically bookmarked and pruning of bookmarks must
be configured by adding the keep_bookmarks parameter to the prune
policy section of the zrepl configuration file (source side only).
Be sure to understand the meaning bookmarks have for maximum
allowable replication downtime.
- The ssh+stdinserver transport protocol has changed, requiring zrepl
to be updates on both the sending and receiving side, and the daemon
restarted on both sides.
- The first outlet in the global.logging section of the configuration
file is now used for logging meta-errors (e.g. problems encountered
when writing to other logging outlets).
20180425:
AFFECTS: users of databases/pecl-redis
AUTHOR: daniel@blodan.se
pecl-redis 4.0.0 breaks backwards compatibility, users
not aware if you are using the changed functionality or not
should swap to databases/pecl-redis3
20180417:
AFFECTS: users of dns/dnscrypt-proxy2
AUTHOR: egypcio@googlemail.com
DNSCrypt-Proxy 2 has been updated to 2.0.10 and the configuration file
has changed from ${PREFIX}/etc/dnscrypt-proxy.toml to
${PREFIX}/etc/dnscrypt-proxy/dnscrypt-proxy.toml.
20180416:
AFFECTS: users of mail/postgrey
AUTHOR: ports.maintainer@evilphi.com
If you use any of the optional make.conf variables to specify the
postgrey user, group, db dir, or run dir when building the port, you will
need to change the prefix from PG_ to POSTGREY_*. The variables were
renamed to solve a namespace collision with the PostgreSQL ports.
20180412:
AFFECTS: users of devel/php-composer
AUTHOR: madpilot@FreeBSD.org
Flavors have been added to the composer port with the update to
1.6.3. Due to the change in PKGNAME pkg(and other tools) will not
notice the update. It is required to tell pkg about the name
change, for example:
# pkg set -n php-composer:php56-composer
20180410:
AFFECTS: users of KDE SC4
AUTHOR: kde@FreeBSD.org
Most of KDE Applications 17.12.3 have now landed in the ports tree.
There are still some missing pieces, that will follow soon.
As mentioned in the commit messages, users of KDE SC4 should stick with the
<foo>-kde4 named package.
As the MOVED entries for ports like databases/akonadi-kde4 have been removed
in the process of updating (as there now is again a databases/akonad), there
might be issues for people that update from a too old installed package list
with portmaster.
These should be fixable by issuing a command à la
# pkg set --change-origin databases/akonadi:databases/akonadi-kde4 akonadi
20180409:
AFFECTS: users of net-im/matterircd
AUTHOR: norrland@nullbyte.se
Matterircd has been updated to 0.17.0 and mattermost configuration settings
need to be migrated to [mattermost] section. See matterircd.toml.sample.
20180404:
AFFECTS: users of www/nextcloud
AUTHOR: brnrd@FreeBSD.org
With the 13.0.1 update the path for Apps bundled with the package has
changed from "apps" to "apps-pkg". You must add an entry to the
"apps_paths" array in config/config.php of your nextcloud installation,
a patch for the default installation can be applied with:
# cd /usr/local/www/nextcloud
# su -m www -c "php ./occ config:import < /usr/local/share/nextcloud/fix-apps_paths.json"
20180401:
AFFECTS: users of mail/dovecot and mail/dovecot-pigeonhole
AUTHOR: adamw@FreeBSD.org
Dovecot has been upgraded to 2.3.1, and pigeonhole to 0.5.1. Most
existing dovecot installations MUST be modified for 2.3, but for
most users the modifications are simple.
Modify your Dovecot conf.d/ files before spinning up 2.3.1. The
upgrading instructions are detailed here:
https://wiki2.dovecot.org/Upgrading/2.3
20180330:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.26. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, follow the
instructions in entry 20161103, it should still be the same.
20180325:
AFFECTS: users of net/samba48
AUTHOR: timur@FreeBSD.org
New Samba 4.8 upgrades the relevant database files in the way, that doesn't
allow easy fallback to the previous versions of Samba. So, before upgrading
to the new version make a backup of the /var/db/samba4/ directory.
Full list of changes, new features and upgrade procedure is available at:
https://www.samba.org/samba/history/samba-4.8.0.html
Please, read it carefully before upgrading!.
20180320:
AFFECTS: users of x11/sterm
AUTHOR: pkubaj@anongoth.pl
The user-defined options in config.h have changed. You should
compare your config.h file with the default one and change
appropriately.
20180319:
AFFECTS: users of dns/dnsmasq
AUTHOR: mandree@FreeBSD.org
Note that with dnsmasq 2.79, some parts of the interface have changed in an
incompatible way versus previous versions. This comprises changed recursion
behaviour, signature support, a change for SIGINT (vs. SIGHUP) behaviour.
Note especially that dnsmasq will no longer answer non-recursive queries
unless it is marked authoritative! Be sure to see the manual page for the
various --auth-* options, such as --auth-zone.
Please see the CHANGELOG that ships with dnsmasq for details.
20180317:
AFFECTS: users of multimedia/plexpy
AUTHOR: feld@FreeBSD.org
Plexpy project has been renamed to Tautulli due to copyright
infringement. The software also has received a major update. Please
see the following upgrade instructions:
- Install multimedia/tautulli
- Create /var/db/tautulli, owned by the user you will run the daemon as
(default: nobody).
- Copy your config.ini and plexpy.db to /var/db/tautulli
- Enable the service and start the software
Tautulli should automatically find your database file, rename it to
tautulli.db, and perform the required updates.
20180310:
AFFECTS: users of security/openssl
AUTHOR: brnrd@FreeBSD.org
The EXPCIPHERS option has been removed from the security/openssl port.
Use the security/openssl-unsafe port if you require this feature.
20180309:
AFFECTS: users of net/unison
AUTHOR: madpilot@FreeBSD.org
Unison has been upgraded to version 2.51, which uses a different
wire protocol than 2.48 did. In order to support synchronization
with other computers where Unison is still at version 2.48, a new
port net/unison248 has been created. It provides unison248 and,
for the x11 flavor, also unison248-text. This unison248 port can
be installed in parallel with the existing net/unison port.
20180308:
AFFECTS: */php* */pecl* */pear*
AUTHOR: mat@FreeBSD.org
PHP extensions and modules have been flavored.
People using Poudriere 3.2+ and binary packages do not have to do anything if
they are using PHP applications.
PHP modules and extensions may have change their names from php5- or php7- to
fully versionned phpXY-.
PECL extensions and PEAR modules package names have changed from pecl- and
pear- to phpXX-pecl and phpXX-pear-.
To rename an installed package to match the new naming scheme, for example,
for the imagick pecl extension, run:
# pkg set -n pecl-imagick:php56-pecl-imagick
For other people, to build the PHP 7.2 version of, for example,
databases/php-memcached, you need to run:
# make FLAVOR=php72 install
20180220:
AFFECTS: users of www/nextcloud
AUTHOR: brnrd@FreeBSD.org
The file and directory permissions of Nextcloud have changed. Write
permissions have been removed from all directories except `data' and
`config'. For the updater to work, the app store of your installation
must be disabled. To disable the app-store prior to updating the
package:
# cd /usr/local/www/nextcloud
# su -m www -c "php ./occ config:system:set appstoreenabled --value=false --type=boolean"
If you've already updated your nextcloud package, you must manually edit
the configuration of nextcloud (config/config.php) and add
'appstoreenabled' => false,
to the CONFIG array before the updater will run.
20180214:
AFFECTS: users of lang/ruby23
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 2.3 to 2.4.
If you compile your own ports you may keep 2.3 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.3 as default version
#
DEFAULT_VERSIONS+=ruby=2.3
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby24 lang/ruby23
# portmaster -R -r ruby-2.4
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby23:lang/ruby24
# portupgrade -x ruby-2.4.\* -fr lang/ruby24
20180209:
AFFECTS: users of japanese/lookup
AUTHOR: yasu@utahime.org
japanese/lookup is update to 1.99.96.20130920. This version is not
compatible with previous version 1.4.1 and incompatibility includes
how to setup. See info of Lookup for detail.
20180209:
AFFECTS: users of net-mgmt/pmacct
AUTHOR: pi@FreeBSD.org
To allow separate pmacctd instances per interface, use
pmacctd_enable="YES"
pmacctd_interfaces="re1 re2"
in /etc/rc.conf. The path to the config files will be
/usr/local/etc/pmacct/<interface>
20180208:
AFFECTS: users of mail/mailman*
AUTHOR: mandree@FreeBSD.org
In order to overcome complaints about mismatched checksums in
Mailman/Default.py, mailman now configures the DEFAULT_EMAIL_HOST
and DEFAULT_URL_HOST to "localhost" statically, and the rc script
will check this and refuse to start on next boot.
Users must configure DEFAULT_EMAIL_HOST and DEFAULT_URL_HOST in
Mailman/mm_cfg.py properly and add this line below:
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
A short example has been added to:
${PREFIX}/local/share/doc/mailman/FreeBSD-post-install-notes.
As of 2.1.26_3, the post-install script will add back the prior
default settings to mm_cfg.py (instead of Defaults.py) if no
virtual hosts have been defined, to cover the normal use cases
and initial installation.
20180201:
AFFECTS: users of editors/emacs* and all ports using Emacs via USES=emacs
AUTHOR: jrm@FreeBSD.org
The Emacs ports framework has been updated to support flavors and the
editors/emacs-nox11 port has been replaced by the nox flavors of
editors/emacs and editors/emacs-devel.
Supported Flavors
--------------------------------------------------------
editors/emacs: full canna nox
editors/emacs-devel: full nox
ports using Emacs: full canna nox devel_full devel_nox
--------------------------------------------------------
For those using pre-built packages, if
# pkg upgrade
does not install the new Emacs package, use one of
# pkg install emacs
# pkg install emacs-canna
# pkg install emacs-nox
# pkg install emacs-devel
# pkg install emacs-devel-nox
For those building their own packages, a flavor other than the default must be
specified. For example, to build the nox flavor of editors/emacs, or to build
the devel_full flavor of a port using Emacs, use
# poudriere bulk -j 11amd64 editors/emacs@nox
# poudriere bulk -j 11amd64 print/pdf-tools@devel_full
or
# make FLAVOR=nox install
# make FLAVOR=devel_full
An alternative to the default flavor, full, for editors/emacs and
editors/emacs-devel can be set in make.conf. For example, to specify nox as
the default flavor for both ports, use
.if ${.CURDIR:M*/editors/emacs*}
FLAVOR?=nox
.endif
For ports using Emacs, an alternative to the default flavor, full,
can be also be set in make.conf. For example, to automatically depend on
emacs-nox, use
DEFAULT_VERSIONS+=emacs=nox
20180117:
AFFECTS: users of x11-toolkits/kf5-kirigami2 and x11/kf5-plasma-framework
AUTHOR: kde@FreeBSD.org
Files that were previously installed by kf5-kirigami2 are now installed
by kf5-plasma-framework. This can lead to a conflict during the upgrade
of the packages.
It is recommended to first remove the package kf5-kirigami2.
20180115:
AFFECTS: users of net-p2p/transmission-daemon
AUTHOR: woodsb02@FreeBSD.org
The transmission-daemon port has been updated to 2.92_4 to incorporate
a patch which mitigates DNS rebinding attacks. This will prevent
clients from being able to connect to the transmission daemon using
DNS with any hostname other than localhost, unless one of the
following is done:
- Enable password authentication, then any hostname is allowed.
This can be achieved by either:
- setting rpc-authentication-required to true, and adding
credentials to the rpc-username and rpc-password fields in
settings.json (must be done whilst the transmission service is
stopped); or
- running transmission-daemon with the following arguments
(these can be set with transmission_flags in /etc/rc.conf):
-t -u USERNAME -v PASSWORD
OR
- Add the allowed server hostnames to the rpc-host-whitelist setting
in settings.json (must be done whilst the transmission service is
stopped). Note that this value is NOT a list of allowed CLIENTS,
but instead a list of allowed SERVER hostnames.
20180111:
AFFECTS: users of editors/vim-lite
AUTHOR: adamw@FreeBSD.org
The vim-lite port has been renamed to vim-console, because it isn't
actually any lighter. All three vim packages are built with
--enable-features=huge. Portmaster users will need to run this
command:
portmaster -o editors/vim-console editors/vim-lite
If the switch doesn't happen automatically for you, just delete the
vim-lite package and install vim-console.
20180109:
AFFECTS: users of www/qt5-webengine
AUTHOR: kde@FreeBSD.org
The upgrade of www/qt5-webengine to 5.9.3 may fail if an older version
of it is installed. It is recommended to either build the port in a
builder like poudriere, or to deinstall and then doing an install.
20180107:
AFFECTS: users of security/gnupg and mail/mutt and mail/neomutt
AUTHOR: adamw@FreeBSD.org
The invocation for gpg from mutt/neomutt changed between gnupg-2.0
(which has expired and is now removed) and gnupg-2.2 (the current
version in the tree). Unless you're using gpgme, PGP-related
commands may fail in (neo)mutt.
In all cases, users are strongly urged to use security/gpgme to take
care of the setup for you. If you prefer to roll your own, the
following muttrc/neomuttrc entry has been reported to work:
pgp_decrypt_command="gpg2 %?p?--passphrase-fd 0 --pinentry-mode=loopback? --no-verbose --batch --output - %f"
See muttrc(5), neomuttrc(5), mutt.org, and neomutt.org for instructions
on (neo)mutt's gpg and gpgme instructions.
20180102:
AFFECTS: users of devel/awscli
AUTHOR: bhughes@FreeBSD.org
The package name for devel/awscli has changed (back) to just awscli.
The introduction of flavors erroneously caused the awscli package to
be renamed to py27-awscli.
20171230:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
If you are building ejabberd 17.11 on a host, which already has an older
version of ejabberd installed, then build process will fail with "unknown type
specifier" errors. As a workaround, please uninstall ejabberd before building
ejabberd.
This has been reported upstream at:
https://github.com/processone/ejabberd/issues/2194
20171223:
AFFECTS: users of dns/dnscrypt-proxy
AUTHOR: egypcio@googlemail.com
The 1.9.5_3 update of dns/dnscrypt-proxy replaces the default resolver used
by dnscrypt-proxy (cisco/OpenDNS) by a random one that does not log entries
and supports dnssec.
20171223:
AFFECTS: users of samba44
AUTHOR: antoine@FreeBSD.org
The default version of samba has been switched from 4.4 to 4.6.
Upgrade instructions:
For package users having samba44 installed indirectly (as a dependency):
# pkg upgrade
For package users having samba44 installed directly (leaf port):
# pkg upgrade
# pkg install samba46
For ports users:
If you want to keep samba44, add DEFAULT_VERSIONS+= samba=4.4 to make.conf
If you want to upgrade to samba46, remove samba44:
# pkg delete -f samba44
Portmaster users:
# portmaster net/samba46
# portmaster -a
Portupgrade users:
# portinstall net/samba46
# portupgrade -a
20171218:
AFFECTS: users of devel/gogs
AUTHOR: dg@syrec.org
Gogs user has been changed to "git" and configuration files are now
located in /usr/local/etc/gogs. Users should update ownership of the
existing Gogs directories with
# chown -R git:git /var/db/gogs
# chown -R git:git /var/log/gogs
and either move or merge the contents of /var/db/gogs/home/.ssh with
/usr/local/git/.ssh. After migration, /var/db/gogs/home can be removed,
and both the user "gogs" and the group "gogs" should be deleted:
# rm -rf /var/db/gogs/home
# pw userdel gogs
# pw groupdel gogs
20171215:
AFFECTS: users of finance/gnucash
AUTHOR: madpilot@FreeBSD.org
The gnucash port has been converted too use flavors, the GUILE1
and GUILE2 options have been converted to flavors so that two
separate packages can be provided.
Since the next major release of gnucash will drop guile1 support,
the default flavor package is compiled against guile2, switching
the previous default.
Users who intend to stay on the guile1 version should deinstall
the default gnucash package and install the gnucash-guile1 package.
20171214:
AFFECTS: all ports users
AUTHOR: adamw@FreeBSD.org
Support for some deprecated variables is going to be removed soon. If
you use any of the following constructs (usually in /etc/make.conf),
you must switch to the new incantations:
OLD NEW
------------------------------- ------------------------------
WITH_[...] OPTIONS_SET= [...]
WITHOUT_[...] OPTIONS_UNSET= [...]
WITHOUT_NLS OPTIONS_UNSET= NLS
NOPORTDOCS OPTIONS_UNSET= DOCS
NOPORTEXAMPLES OPTIONS_UNSET= EXAMPLES
WITH_BDB_VER=[...] DEFAULT_VERSIONS+= bdb=[...]
OVERRIDE_LINUX_BASE_PORT=[...] DEFAULT_VERSIONS+= linux=[...]
WITH_OPENSSL_BASE DEFAULT_VERSIONS+= ssl=base
WITH_OPENSSL_PORT DEFAULT_VERSIONS+= ssl=port
20171205:
AFFECTS: users of dns/powerdns
AUTHOR: krion@FreeBSD.org
Recursor passthrough removal: This will impact many installations.
Previously, the PowerDNS Authoritative Server contained a facility
for sending recursion desired queries to a resolving backend,
possibly after first consulting its local cache. This feature
(‘recursor=’) was frequently confusing and also delivered
inconsistent results, for example when a query ended up referring
to a CNAME that was outside of the Authoritative Server’s
knowledge.
20171203:
AFFECTS: users of sysutils/dsbmd
AUTHOR: mk@freeshell.de
Due to new configuration variables and new features, users of dsbmd
version 0.4.1 and earlier should consider recreating their dsbmd.conf from
the new dsbmd.conf.sample.
20171130:
AFFECTS: all ports users
AUTHOR: adamw@FreeBSD.org
The ports tree has gained "flavors," which are a way to produce multiple
variations of a port. Some intended examples of this are language
modules being produced for multiple language versions, and lite/nox11 packages,
without needing separate ports for each variation. Python ports have already
been flavored (see the below entry). Flavor support must be added to
individual ports.
Flavors are already supported by make, pkg, poudriere, and synth; see the
manpages for those tools for usage instructions. Portmaster and portupgrade
don't support flavors yet, but community work on those tools is in progress.
Some bumps and breakages are inevitable for a major change such as this.
Please report breakages and monitor the ports@ list for solutions as they
become available.
20171130:
AFFECTS: */py*
AUTHOR: mat@FreeBSD.org
Ports using Python via USES=python are now flavored. All the py3-* ports
have been removed and folded into their py-* master ports.
People using Poudriere 3.2+ and binary packages do not have to do anything.
For other people, to build the Python 3.6 version of, for example,
databases/py-gdbm, you need to run:
# make FLAVOR=py36 install
20171126:
AFFECTS: users of security/p5-openxpki
AUTHOR: dbaio@FreeBSD.org
OpenXPKI has been updated to 1.19.4, some important changes were made, please
see the upgrading documentation for more details:
http://openxpki.readthedocs.io/en/latest/upgrading.html
20171126:
AFFECTS: users of mail/sympa
AUTHOR: dgeo@centrale-marseille.fr
Web's static dirs have moved to a single dedicated directory.
Users should review webserver's /static configuration (examples in
share/examples/sympa).
20171119:
AFFECTS: users of sysutils/zrepl
AUTHOR: woodsb02@FreeBSD.org
Zrepl has been updated to 0.0.2, which introduces two changes that will
require existing users to change their zrepl.yml config file:
- global.logging is no longer a dictionary but a list.
Refer to the new format here: https://zrepl.github.io/configuration/logging.html
- source job field datasets renamed to filesystems.
Refer to the new format here: https://zrepl.github.io/configuration/jobs.html
https://zrepl.github.io/changelog.html#id1
20171117:
AFFECTS: users of sysutils/terraform
AUTHOR: lifanov@FreeBSD.org
Terraform has been updated to 0.11, which introduces several incompatible
changes. Please follow upgrading guide when updating the package.
https://www.terraform.io/upgrade-guides/0-11.html
20171114:
AFFECTS: users of ports-mgmt/poudriere
AUTHOR: bdrewery@FreeBSD.org
"poudriere options" now respects the -p flag while it did not before.
This means that it may create an empty directory when used now rather
than continue to use your existing options set. You may want to not
use -p or move your existing options directory, in
/usr/local/etc/poudriere.d/*-options, to the new format with the
ports tree name in it. Otherwise "poudriere bulk" will use the
new empty directory.
This behavior will likely change in 3.2.1 to be more backwards-compatible.
20171112:
AFFECTS: consumers of devel/oniguruma*
AUTHOR: riggs@FreeBSD.org
Outdated versions of oniguruma have been removed from the ports
tree; devel/oniguruma is the only supported version, currently
replacing devel/oniguruma6.
pkg should handle this automatically while users of portmaster or
portupgrade might need to take additional manual steps:
for users of portmaster:
portmaster -o devel/oniguruma devel/oniguruma6
portmaster -r devel/oniguruma
for users of portupgrade:
portupgrade -o devel/oniguruma devel/oniguruma6
portupgrade -fr devel/oniguruma
20171107:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to node.js v9.0.0, the latest
upstream release. A new port, www/node8, has been created for the
v8.x LTS branch. Users wanting to stay on v8.x can replace www/node
with www/node8 with one of the following commands:
# pkg install www/node8
or
# portmaster -o www/node8 www/node
or
# portupgrade -o www/node8 www/node
20171107:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.6 of LibreSSL.
The shared library versions of the libraries have been bumped.
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20171105:
AFFECTS: users of www/mod_auth_cas
AUTHOR: brnrd@FreeBSD.org
The configuration of mod_auth_cas has changed since the previous
version. Visit the https://github.com/apereo/mod_auth_cas page for
an overview of all configuration parameters
20171105:
AFFECTS: users of www/mod_rpaf2
AUTHOR: brnrd@FreeBSD.org
The configuration of mod_rpaf2 has been heavily modified since version
0.6. Have a look at https://github.com/gnif/mod_rpaf/tree/v0.8.4 to
determine what you need to change in your configuration.
20171031:
AFFECTS: users of editors/vim
AUTHOR: adamw@FreeBSD.org
The default vim language bindings have changed. Python 2 and 3 bindings
may now be enabled independently (the default vim package will continue
to depend on python-2.7).
Lua and Tcl bindings have been disabled by default. If you need these
bindings, you'll need to compile vim yourself. Note that bindings are
only for plugins written in those languages, and for interactive
debugging. Editing, indenting, linting, completing, and syntax-highlighting
those languages is NOT affected.
20171026:
AFFECTS: users of devel/universal-ctags
AUTHOR: rodrigo@FreeBSD.org
Due to conflicts with emacs ctag (editors/emacs-devel, editors/emacs-nox11, editors/emacs),
the installed files will be prefixed with the 'u' character.
The new binaries will de named uctags and ureadtags.
20171015:
AFFECTS: people using WITHOUT_DEBUG
AUTHOR: madpilot@FreeBSD.org
The WITHOUT_DEBUG flag has been retired. It's only purpose was
to override a global WITH_DEBUG, if that was defined, but many
ports were ignoring such flag even if honouring WITH_DEBUG.
The same effect can be obtained using ".undef WITH_DEBUG" without
any special support in port Makefiles.
20171012:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
OpenSSH has been upgraded to 7.6p1 which has removed several deprecated
features:
- SSH version 1 support dropped.
- Dropped support for hmac-ripemd160 MAC.
- Dropped support for the ciphers arcfour, blowfish and CAST.
- RSA keys less than 1024 bits are refused.
The HPN option is currently disabled by default, and does not build,
in the package. This follows what happened in base as well.
20171004:
AFFECTS: users of security/krb5-appl
AUTHOR: cy@FreeBSD.org
Configuration options to rename kerberos ftp, telnet, rlogin, rsh, and
rcp are now default to avoid conflicting with net/bsdrcmds packages
(in poudriere). Deselect the options to use the original command names
and also uninstall net/bsdrcmds to avoid the conflict.
20171002:
AFFECTS: users of x11-wm/cwm
AUTHOR: tobik@FreeBSD.org
Configuration options were renamed and you need to update your ~/.cwmrc
accordingly. Make sure to check cwmrc(5) for the new option names.
cwm-migrate-config.pl can help in migrating your ~/.cwmrc.
20171001:
AFFECTS: users of mail/isync using Maildir sub-folders
AUTHOR: ehaupt@FreeBSD.org
If you have Maildir sub-folders, you need to update the configuration
to specify the naming style.
Please refer to the mbsync(1) man page section 'SubFolders
Verbatim|Maildir++|Legacy' on how to make the apropriate changes.
20170930:
AFFECTS: users of PHP and its modules
AUTHOR: eugen@FreeBSD.org
All lang/php* ports switched to depend on devel/oniguruma6
instead of previous oniguruma version some time ago.
If you have not moved from devel/oniguruma5 before and
have troubles updating PHP,
for users of portmaster:
portmaster -o devel/oniguruma6 devel/oniguruma5
portmaster -r devel/oniguruma6
for users of portupgrade:
portupgrade -o devel/oniguruma6 devel/oniguruma5
portupgrade -fr devel/oniguruma6
pkg should handle this automatically.
20170928:
AFFECTS: users of security/courier-authlib and its modules
AUTHOR: madpilot@FreeBSD.org
The affected ports have been modified to follow the upstream
suggested best practice to use the sysconftool on installation.
Please make sure your configuration files include all the comments
that tool uses to correctly update the configuration on update.
You can use the ".sample" or ".dist" files as templates for missing
comments if needed.
20170915:
AFFECTS: users of devel/cargo
AUTHOR: rust@FreeBSD.org
Starting with version 1.19.0, Cargo is provided with Rust. Therefore,
devel/cargo was merged into lang/rust.
20170914:
AFFECTS: users of CMake & CMake Modules
AUTHOR: adridg@FreeBSD.org
The devel/cmake-modules port has been merged into devel/cmake.
The benefit of being able to update the modules without the binary
is outweighed by the issues caused by having the binary out-of-sync
with the modules.
Users should delete the devel/cmake-modules package and then
upgrade or reinstall devel/cmake.
All ports have been updated to depend only on CMake.
20170904:
AFFECTS: users of net-mgmt/seafile-server
AUTHOR: ultima@FreeBSD.org
Users using MySQL updating to 6.1.2 need to verify table's collation
are utf8_unicode_ci. Upstream has set collation type to be implicit
and will cause all libraries to disappear if set to incorrect collation.
20170828:
AFFECTS: users of security/gnupg
AUTHOR: adamw@FreeBSD.org
security/gnupg has become the new stable version of GnuPG. This is
an LTS branch. gnupg20 will reach EOL at the end of the year, and all
gnupg20 users should migrate to gnupg22.
See https://gnupg.org/faq/whats-new-in-2.1.html for important changes.
20170820:
AFFECTS: users of www/uwsgi
AUTHOR: ultima@FreeBSD.org
The default socket owner and mode had been changed from www:www 600
to uwsgi:www 660. This should resolve issue #1471[1] on github.
[1] https://github.com/unbit/uwsgi/issues/1471
20170808:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
The Glorious Glasgow Haskell Compiler has been updated to version
8.0.2. Hence it is recommended to rebuild or reinstall all the
dependent ports and the lang/ghc port itself in one of the following
ways:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
In case of pkg(8), it is probably safer to remove all the GHC-dependent
packages along with GHC and reinstall everything from scratch. For
example:
# pkg query "%ro" ghc > ghc-pkgs.txt
# pkg delete -y lang/ghc
In ghc-pkgs.txt, check and remove all the packages that have been moved
on the update, then use this command:
# pkg install -y `cat ghc-pkgs.txt`
20170807:
AFFECTS: users of mail/dovecot2 and mail/dovecot2-pigeonhole
AUTHOR: adamw@FreeBSD.org
Now that dovecot1 has been removed from the ports tree, dovecot2
and dovecot2-pigeonhole have been renamed to simply dovecot and
dovecot-pigeonhole.
pkg should handle the rename automatically, but if you run into
trouble, you can point pkg at the new origin via:
# pkg set -o mail/dovecot2:mail/dovecot
# pkg set -o mail/dovecot2-pigeonhole:mail/dovecot-pigeonhole
Similarly, you can point portmaster at the new location via:
# portmaster -o mail/dovecot mail/dovecot2
If all else fails, just remove and reinstall the package:
# pkg delete dovecot2
# pkg install dovecot
20170806:
AFFECTS: users of mail/dovecot2-antispam-plugin
AUTHOR: adamw@FreeBSD.org
Development of the antispam plugin ceased years ago, and upstream
recommends using pigeonhole (mail/dovecot2-pigeonhole) instead.
See https://wiki2.dovecot.org/HowTo/AntispamWithSieve for a recipe
to replicate the antispam plugin's behaviour.
20170803:
AFFECTS: users of net/guacamole-client
AUTHOR: ultima@FreeBSD.org
As of version 0.9.13, the configuration directory for guacamole-client
has changed from /usr/local/etc/guacamole to
/usr/local/etc/guacamole-client.
20170803:
AFFECTS: users of net/guacamole-server
AUTHOR: ultima@FreeBSD.org
As of version 0.9.13, the configuration directory for guacamole-server
has changed from /usr/local/etc/guacd to /usr/local/etc/guacamole-server.
20170803:
AFFECTS: users of sysutils/terraform
AUTHOR: lifanov@FreeBSD.org
Terraform was updated to version 0.10.0, which split out provider plugins.
Provider plugins are now installed in the project directory the next time
"terraform init" is run. Please see the complete upgrading guide:
https://www.terraform.io/upgrade-guides/0-10.html
20170729:
AFFECTS: users of net-p2p/bitcoin
AUTHOR: lwhsu@FreeBSD.org
Bitcoin data directory has been changed from /var/db/bitcoind to
/var/db/bitcoin. Users of previous versions may want to migrate data to
new location or specify bitcoind_data.
20170729:
AFFECTS: users of mail/mailscanner
AUTHOR: crees@FreeBSD.org
Version 5.0.3 of MailScanner introduced a serious bug in packaging.
Unfortunately if it is installed, your configuration has been deleted.
If you have managed to get it working, please back up
/usr/local/etc/MailScanner as it will also be deleted on deinstall
of the same package.
20170726:
AFFECTS: users of www/luakit
AUTHOR: ports@textmail.me
Luakit was updated to version 2017.07.26, which is incompatible to the
previous release from 2012. Please remove old configuration files from
the following directories:
${PREFIX}/etc/xdg/luakit
${HOME}/.config/luakit
${HOME}/.local/share/luakit
20170721:
AFFECTS: users of security/sshguard*
AUTHOR: dan.mcgregir@usask.ca
security/sshguard was updated to 2.0.0, and security/sshguard-pf,
security/sshguard-ipfw, and security/sshguard-null have been merged into
security/sshguard.
Configuration of the service is now handled in ${PREFIX}/etc/sshguard.conf.
Please select the desired backend, -null is selected by default.
In order to upgrade from 1.7.1 change the origin to security/sshguard
# pkg set -o security/sshguard-ipfw:security/sshguard
# pkg set -o security/sshguard-null:security/sshguard
# pkg set -o security/sshguard-pf:security/sshguard
20170717:
AFFECTS: users of devel/p5-Log-Any and devel/p5-Log-Any-Adapter-Syslog
AUTHOR: eugen@FreeBSD.org
devel/p5-Log-Any-Adapter-Syslog functionality have been merged into
devel/p5-Log-Any and from now devel/p5-Log-Any must be used.
devel/p5-Log-Any-Adapter-Syslog will be marked as deprecated and removed.
20170712:
AFFECTS: users of devel/apr1
AUTHOR: brnrd@FreeBSD.org
APR was updated to 1.6.0 and APR-util was updated to 1.6.2
The Apache Portable Runtime project removed support for FreeTDS from the
APR Utilities in version 1.6. Users of FreeTDS will have to migrate
configurations to use the newly added ODBC support in conjunction with
FreeTDS using FreeTDS' ODBC capabilities.
Please rebuild all ports which are using functions from APR/APR-util
such as Apache, Subversion, etc. Normally, you can obtain the list of
dependent software by running the following command:
# pkg info -r apr
Then you should rebuild all ports depending on APR(-util) to avoid
dangling shared library dependencies. Poudriere and pkg handle this
correctly, portmaster and portupgrade users can use the following to
rebuild all dependent ports.
Portmaster users:
portmaster -r apr
Portupgrade users:
portupgrade -fr devel/apr1
20170710:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
After update to 17.07, there is an issue[1] expected related to certificate
verification with TLS connections.
[1] - https://github.com/processone/ejabberd/issues/1833
20170628:
AFFECTS: users of www/node
AUTHOR: bhughes@FreeBSD.org
The www/node port has been updated to Node.js v8.1.2, the latest
upstream release. This is a major release, including many significant
changes. Users are encouraged to read the release announcements before
upgrading:
https://nodejs.org/en/blog/release/v8.0.0/
https://nodejs.org/en/blog/release/v8.1.0/
20170626:
AFFECTS: users of net-mgmt/zabbix24*
AUTHOR: dbaio@FreeBSD.org
Zabbix 2.4 has reached end of life and net-mgmt/zabbix24* ports have been
removed. Users that have not yet moved to a newer version, should use now
net-mgmt/zabbix3-* (LTS release) or net-mgmt/zabbix32-* (Standard release).
See more info about Zabbix releases here:
http://www.zabbix.com/life_cycle_and_release_policy
20170624:
AFFECTS: users of mail/dcc-dccd
AUTHOR: ultima@FreeBSD.org
The ALT_HOME option was removed in 1.3.159_1. If this option is being
used, please be sure to move the old home directory, /var/dcc to
${PREFIX}/dcc.
20170624:
AFFECTS: users of net/rabbitmq
AUTHOR: olgeni@FreeBSD.org
The rabbitmq-3.6.10_1 port has been changed to use version 19 of
the Erlang runtime, because RabbitMQ is not yet compatible with
version 20.
Upgrades to the previous rabbitmq-3.6.10 must be avoided as
they can lead to data corruption due to changes in Erlang 20.
20170622:
AFFECTS: users of databases/postgresql* and other software using PostgreSQL to run
AUTHOR: tz@FreeBSD.org
The default version of PostgreSQL has been switched from 9.3 to 9.5.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 9.3.12, your
files are named according to this.
# service postgresql stop
# pkg create postgresql93-server postgresql93-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql93-server-9.3.17.txz -C /tmp/pg-upgrade
# tar xf postgresql93-contrib-9.3.17.txz -C /tmp/pg-upgrade
# mv /usr/local/pgsql/data /usr/local/pgsql/data93
# pkg delete -f databases/postgresql93-server databases/postgresql93-contrib databases/postgresql93-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql95-server databases/postgresql95-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql95-server databases/postgresql95-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql95-server databases/postgresql95-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# service postgresql initdb
# su -l pgsql -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /usr/local/pgsql/data93/ -B /usr/local/bin/ -D /usr/local/pgsql/data/"
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
20170614:
AFFECTS: users of editors/calligra
AUTHOR: groot@kde.org
Calligra has been updated to 3.0.1, which is a KDE Frameworks 5 (KF5)
based application. Calligra now uses Qt5 and KF5. The translations have
been merged (upstream) into the application, so separate language /
translation ports are no longer provided. Krita has been split out
(upstream) into a separate application, which is packaged as
graphics/krita. Kexi, the visual database applications creator,
is packaged separately as databases/kexi.
Users of Calligra are encouraged to install Krita and Kexi separately,
and to report issues with the upgrade to kde@.
20170613:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
After update to 17.04, there is an issue[1] expected with S2S connections,
which can be resolved by adding 'mod_s2s_dialback: {}' to 'modules' section
of configuration file.
[1] - https://github.com/processone/ejabberd/issues/1700
20170603:
AFFECTS: users of www/kanboard
AUTHOR: joneum@FreeBSD.org
After update to 1.0.44, there are following breaking changes:
* Move calendar to external plugin: https://github.com/kanboard/plugin-calendar
* Move Gantt charts to external plugin: https://github.com/kanboard/plugin-gantt
* Move Gravatar to external plugin: https://github.com/kanboard/plugin-gravatar
20170602:
AFFECTS: users of Qt 5 in presence of binutils
AUTHOR: amdmi3@FreeBSD.org
gold linker from binutils 2.28 may produce duplicate library
symbols, which makes shared libraries created with it not usable
with conventional ld linker.
This affects Qt, as qt5-qmake will detect gold and use it to build
Qt libraries. Broken libQt5Core will be produced and ports which
depend on it will then fail to link with the following errors:
...lib/libQt5Core.so:(.dynamic+0x27ac8): multiple definition of `__bss_start at Qt_5'
...lib/libQt5Core.so:(.dynamic+0x27ac8): first defined here
...lib/libQt5Core.so:(.dynamic+0x27ac8): multiple definition of `_edata at Qt_5'
...lib/libQt5Core.so:(.dynamic+0x27ac8): first defined here
...lib/libQt5Core.so:(.dynamic+0x2b2d0): multiple definition of `_end at Qt_5'
Qt5 was fixed to ignore gold. If you see these errors, you
need to rebuild qt5-qmake, then all qt5-* ports.
20170529:
AFFECTS: users of sysutils/dsbmd
AUTHOR: mk@freeshell.de
Due to new configuration variables and semantic changes, users of dsbmd
version 0.2 and earlier should consider recreating their dsbmd.conf from
the new dsbmd.conf.sample.
20170518:
AFFECTS: users of www/yarn
AUTHOR: adamw@FreeBSD.org
The default node backend for yarn has switched to www/node. Binary
package users should expect the node backend to be switched during
the upgrade. To keep the node6 (LTS) backend, rebuild www/yarn with
the NODE6 backend option enabled.
20170517:
AFFECTS: users of security/pecl-ssh2
AUTHOR: dbaio@FreeBSD.org
The security/pecl-ssh2 has been upgraded to version 1.0, and the new
version is not compatible with PHP5. If you need PHP5 support, you can
find version 0.13 in security/pecl-ssh2-0.
20170412:
AFFECTS: users of sysutils/ansible
AUTHOR: lifanov@FreeBSD.org
The default value for ansible_python_interpreter has been changed
to match the upstream /usr/bin/python. If managing FreeBSD systems,
adjust the hosts database to explicitly set a valid python interpreter:
[freebsd]
host1
[freebsd_vars]
ansible_python_interpreter=/usr/local/bin/python2.7
20170411:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.5 of LibreSSL.
The shared library versions of the libraries have been bumped.
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20170411:
AFFECTS: www/firefox
AUTHOR: gecko@FreeBSD.org
Firefox 53 or later may fail to build if sem(4) is present (see below)
because sysconf(3) still consults the old limits. If you don't plan to
run FreeBSD 8.x or older binaries make sure sem(4) isn't loaded during
boot or built statically into the kernel.
Creating config.status
Traceback (most recent call last):
File "configure.py", line 124, in <module>
sys.exit(main(sys.argv))
File "configure.py", line 34, in main
return config_status(config)
File "configure.py", line 119, in config_status
return config_status(args=[], **encode(sanitized_config, encoding))
File "python/mozbuild/mozbuild/config_status.py", line 136, in config_status
reader = BuildReader(env)
File "python/mozbuild/mozbuild/frontend/reader.py", line 886, in __init__
self._gyp_worker_pool = ProcessPoolExecutor(max_workers=max_workers)
File "python/futures/concurrent/futures/process.py", line 274, in __init__
_check_system_limits()
File "python/futures/concurrent/futures/process.py", line 263, in _check_system_limits
raise NotImplementedError(_system_limited)
NotImplementedError: system provides too few semaphores (30 available, 256 necessary)
20170410:
AFFECTS: users of x11-wm/awesome
AUTHOR: garga@FreeBSD.org
Awesome Window Manager (x11-wm/awesome) was upgraded to 4.1 and its config
is not backward compatible with 3.5. A new port was created to keep 3.5
version available at x11-wm/awesome3 and it will be available for 6 months
until users have time to upgrade configuration.
There are references about what has changed in 4.0 at:
https://awesomewm.org/apidoc/documentation/89-NEWS.md.html#v4
And configuration porting tips at:
https://awesomewm.org/apidoc/documentation/17-porting-tips.md.html#v4
If you would like to keep using 3.x, please run the collowing command to
update pkg database:
# pkg set -n awesome:awesome3
# pkg set -o x11-wm/awesome:x11-wm/awesome3
20170404:
AFFECTS: users of Xapian 1.2.x and www/ikiwiki
AUTHOR: sunpoet@FreeBSD.org
Xapian has been updated to 1.4.3. The 1.2.x series has been renamed with
suffix "12". The Perl binding for Xapian 1.4.x is databases/p5-Xapian.
Since www/ikiwiki depends on Search::Xapian, it stays with Xapian 1.2.
If you would like to keep using 1.2, please run the following commands
to update pkg database:
xapian-core:
# pkg set -n xapian-core:xapian-core12
# pkg set -o databases/xapian-core:databases/xapian-core12
p5-Search-Xapian:
# pkg set -n p5-Search-Xapian:p5-Search-Xapian12
# pkg set -o databases/p5-Search-Xapian:databases/p5-Search-Xapian12
xapian-bindings:
# pkg set -n xapian-bindings:xapian-bindings12
# pkg set -o databases/xapian-bindings:databases/xapian-bindings12
xapian-omega:
# pkg set -n xapian-omega:xapian-omega12
# pkg set -o databases/xapian-omega:databases/xapian-omega12
20170401:
AFFECTS: net/samba44, net/samba45, net/samba46 and devel/p5-Parse-Pidl*
AUTHOR: timur@FreeBSD.org
It turned out that arbitary versions of p5-Parse-Pidl may lead to the
hard to explain crashes of the Samba server and utilities(in particular
we suspect it was responsible for the troubles with the DC provisioning).
So, from now on net/samba* ports use bundled version of Pidl. You need to
remove external package from the system:
pkg delete -f p5-Parse-Pidl p5-Parse-Pidl44
20170331:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
The format of several log messages emitted by the packet code has
changed to include additional information about the user and
their authentication state. Software that monitors ssh/sshd logs
may need to account for these changes. For example:
Connection closed by user x 1.1.1.1 port 1234 [preauth]
Connection closed by authenticating user x 10.1.1.1 port 1234 [preauth]
Connection closed by invalid user x 1.1.1.1 port 1234 [preauth]
Affected messages include connection closure, timeout, remote
disconnection, negotiation failure and some other fatal messages
generated by the packet code.
20170326:
AFFECTS: users of samba43
AUTHOR: antoine@FreeBSD.org
The default version of samba has been switched from 4.3 to 4.4.
Upgrade instructions:
For package users having samba43 installed indirectly (as a dependency):
# pkg upgrade
For package users having samba43 installed directly (leaf port):
# pkg upgrade
# pkg install samba44
For ports users:
If you want to keep samba43, add DEFAULT_VERSIONS+= samba=4.3 to make.conf
If you want to upgrade to samba44, remove samba43 and obsolete packages:
# pkg delete -f samba36-libsmbclient samba36-nmblookup samba36-smbclient samba36 samba43 p5-Parse-Pidl
Portmaster users:
# portmaster net/samba44
# portmaster -a
Portupgrade users:
# portinstall net/samba44
# portupgrade -a
20170325:
AFFECTS: net/samba46 and devel/p5-Parse-Pidl
AUTHOR: timur@FreeBSD.org
New version of Samba port from 4.6 branch is added. Before upgrading please read upgrade notes:
https://www.samba.org/samba/history/samba-4.6.0.html
For the vfs_fruit users:
Users on *BSD must rename the metadata xattr used by vfs_fruit when
using the default setting "fruit:metadata = netatalk".
Due to a glitch in the Samba xattr API compatibility layer for FreeBSD and a
mistake in vfs_fruit, vfs_fruit ended up using the wrong xattr name when
configured with "fruit:metadata = netatalk" (default). Instead of the correct
org.netatalk.Metadata
it used
netatalk.Metadata
Starting with Samba 4.6 vfs_fruit will use the correct "org.netatalk.Metadata"
which means existing installations must rename this xattrs. For this purpose
Samba now includes a new tool `mvxattr`.
20170325:
AFFECTS: net/samba45, net/samba46 and devel/p5-Parse-Pidl
AUTHOR: timur@FreeBSD.org
While new Uses/samba.mk dosen't work well with slave ports to compile devel/p5-Parse-Pidl
for net/samba45 or net/samba46 you need explicitly set in the /etc/make.conf:
SAMBA4_PORT=net/samba46
explicitly. In the future that shouldn't be necessary.
20170321:
AFFECTS: users of samba36-libsmbclient, samba36-nmblookup samba36-smbclient and samba36
AUTHOR: antoine@FreeBSD.org
The obsolete samba36-libsmbclient, samba36-nmblookup, samba36-smbclient and samba36 packages/ports were removed
and USES=samba was introduced.
Upgrade instructions:
For package users having those ports installed indirectly (as dependencies):
# pkg upgrade
For package users having those ports installed directly (leaf ports):
# pkg upgrade
# pkg install samba43
For ports users:
Choose you samba version, for instance add DEFAULT_VERSIONS+= samba=4.3 to make.conf
Remove obsolete packages:
# pkg delete -f samba36-libsmbclient samba36-nmblookup samba36-smbclient samba36
Portmaster users:
# portmaster net/samba43
# portmaster -a
Portupgrade users:
# portinstall net/samba43
# portupgrade -a
20170319:
AFFECTS: users of mail/pecl-mailparse
AUTHOR: dbaio@bsd.com.br
The mail/pecl-mailparse has been upgraded to version 3.0.2, and the new
version is not compatible with PHP5. If you need PHP5 support, you can
find version 2.1.6 in mail/pecl-mailparse2.
20170319:
AFFECTS: users of textproc/pecl-yaml
AUTHOR: dbaio@bsd.com.br
The pecl-yaml has been upgraded to version 2.0.0, and the new version is
not compatible with PHP5. If you need PHP5 support, you can find version
1.3.0 in textproc/pecl-yaml1.
20170316:
AFFECTS: users of python setuptools
AUTHOR: antoine@FreeBSD.org
The python setuptools ports have been renamed to better match other python ports.
Ports users need to rename them so that portupgrade and portmaster do not
get confused. For example:
pkg set -n py27-setuptools27:py27-setuptools
pkg set -o devel/py-setuptools27:devel/py27-setuptools
or
pkg set -n py35-setuptools35:py35-setuptools
pkg set -o devel/py-setuptools35:devel/py35-setuptools
20170312:
AFFECTS: users of textproc/ack
AUTHOR: sunpoet@FreeBSD.org
ack has been renamed back to p5-ack to match our perl naming. You could
run the following to update pkg database:
# pkg set -n ack:p5-ack
# pkg set -o textproc/ack:textproc/p5-ack
20170311:
AFFECTS: users of games/tome4 with paid DLCs
AUTHOR: lifanov@FreeBSD.org
The Ashes of Urh'Rok and Embers of Rage DLCs have been updated to be
compatible with changes introduced in ToME 1.5.0. Users of these DLCs
will need to redownload nd place these in $HOME/.t-engine/4.0/addons.
20170302:
AFFECTS: users of mail/thunderbird with Lightning
AUTHOR: cmt@FreeBSD.org
After changes in the packaging of the Lightning extension, profiles
using this extension have to be re-created.
20170223:
AFFECTS: users of devel/mtbl
AUTHOR: truckman@FreeBSD.org
There is a libmtbl shared library version bump in mtbl version 1.0.0.
The affected dependent ports have had PORTREVISION bumps, but you will
need to rebuild any applications that link to libmtbl.
20170220:
AFFECTS: sysutils/filebeat sysutils/metricbeat sysutils/packetbeat
AUTHOR: girgen@FreeBSD.org
The three elasticsearch beats ports have merged into one single port
systuils/beats that installs all of the above and some more. The reason is to
make the port more maintainable and also that the new heartbeat beat would
conflict with sysutils/heartbeat.
20170220:
AFFECTS: devel/libevent2
AUTHOR: jbeich@FreeBSD.org
libevent2 has been renamed back to libevent as the default version.
If you manage out of tree ports make sure to run the following:
# pkg set -n libevent2:libevent
# pkg set -o devel/libevent2:devel/libevent
20170218:
AFFECTS: users of Qt 4 and Qt 5
AUTHOR: kde@FreeBSD.org
Following what is already done in Qt 5, the Qt 4 ports no longer install
their binaries into ${LOCALBASE}/bin (which is "/usr/local/bin" in most
cases). Additionally, the "-qt4" suffix has been dropped from the file names
of the binaries that had it, such as "qmake-qt4".
The new misc/qtchooser port is now used to choose whether a Qt 4 or Qt 5
version of a binary such as "moc", "qmake" or "designer" will be used. By
default, the Qt 5 versions are preferred, but that can be changed by setting
the QT_SELECT environment variable to "qt4".
qtchooser also allows one to seamlessly use other Qt installations for those
binaries, which is particularly beneficial to people working on Qt itself or
who need their own checkouts.
See qtchooser(1) for more information on how to configure qtchooser.
20170213:
AFFECTS: users of www/node*
AUTHOR: bradleythughes@fastmail.fm
The BUNDLED_SSL option is now enabled by default on FreeBSD 10, since
Node.js requires OpenSSL 1.0.2, and FreeBSD 10 is shipped with 1.0.1.
20170213:
AFFECTS: users of graphics/libGL, graphics/libEGL, graphics/libglesv2
AUTHOR: kwm@FreeBSD.org
The workaround for handling conflicting libraries between the
nvidia-driver, libGL, libEGL and libglesv2 ports was removed. If the
nvidia-driver port is updated before the other ports, it will remove
the libraries of said ports. This is a side effect of how the workaround
worked. If this happens reinstalling the affected port is enough.
pkg users can run: pkg install -f libGL libEGL libglesv2
20170211:
AFFECTS: users of x11-server/xorg-server
AUTHOR: rezny@FreeBSD.org
Xorg server has been updated to 1.18.4 and autodetection has changed.
The order in which drivers are now attempted is:
1) vendor/model specific driver according to PCI IDs
2) generic modesetting driver which requires a drm driver with KMS
3) scfb, the generic framebuffer driver
4) vesa (only if arch is x86)
This should minimize the need for xorg.conf files. It is recommended to
load the correct KMS driver (i915kms.ko or radeonkms.ko) via rc.conf,
i.e. kld_list="i915kms.ko", to ensure correct functionality. Although
the vendor drivers may attempt to load the correct drm driver, which
does not always work, the modesetting driver assumes the required KMS
driver is already loaded and will fail if there is none. The modesetting
driver is now recommended as an alternative to the Intel driver; the
performance is comparable and stability is better with modesetting. The
ATI driver continues to offer better performance than modesetting.
20170203:
AFFECTS: users of security/libressl-devel
AUTHOR: brnrd@FreeBSD.org
The version 2.5.1 bumps the libcrypto, libssl and libtls shared library
versions. You will have to rebuild all packages that depend on
libressl-devel. Check the 20160811 libressl entry for more detailed
guidance on rebuilding.
20170202:
AFFECTS: users of www/uwsgi
AUTHOR: feld@FreeBSD.org
The previous disruptive changes to uwsgi for security have been remediated
through creation of a dedicated uwsgi user/group and utilizing the
uwsgi feature to set socket ownership. The uwsgi daemon by default now
has the following properties:
* Process runs as uwsgi user and group (UID/GID 165)
* Socket mode is 660, still protecting unauthorized access from "other"
* Socket ownership is www:www, restoring compatibility
20170130:
AFFECTS: users of devel/ice, devel/py-ice, devel/php5-ice
AUTHOR: grembo@FreeBSD.org
Since __WORDSIZE as defined by <stdint.h> always reports 32 when using
C++98/03 (unless __STDC_LIMIT_MACROS is set explictly), Ice 3.6.3 used
"long long" for Int64 instead of "long" on 64-bit platforms by mistake.
A workaround has been added in version 3.6.3_2 of these three ports,
requiring to upgrade all of them at the same time and to rebuild all
custom code that links against them.
20170129:
AFFECTS: users of multimedia/motion
AUTHOR: jhale@FreeBSD.org
Version 3.x expected the configuration files to reside in:
${LOCALBASE}/etc
Version 4.x expects the configuration files to reside in:
${LOCALBASE}/etc/motion
This was unfortunately overlooked when the port was updated to 4.x, but it
has now been fixed to install the default configuration file in the new
location. The rc script now checks for motion.conf in the new location.
While you may be able to simply copy your old motion.conf to the new location,
it is recommended to review ${LOCALBASE}/etc/motion/motion.conf and make
changes to it based on your old ${LOCALBASE}/etc/motion.conf as some options
have been added and removed.
Further, if you use motion with multiple cameras and have
${LOCALBASE}/etc/thread[0-9].conf files, they should be moved to
${LOCALBASE}/etc/motion as well. These files are deprecated and should be
renamed to camera[0-9].conf and in motion.conf, lines like:
thread /usr/local/etc/thread1.conf
Should be converted to:
camera /usr/local/etc/motion/camera1.conf
20170127:
AFFECTS: users of www/uwsgi
AUTHOR: feld@FreeBSD.org
The default socket mode for uwsgi as 777 is a severe security concern.
This has been remediated by changing the rc script to default to 600.
The mode is configurable with rc.conf values: uwsgi_socket_mode="600"
or for a profile named "www", uwsgi_www_socket_mode="600".
20170121:
AFFECTS: users of security/tinc
AUTHOR: dinoex@FreeBSD.org
this version of tinc requires all nodes in the VPN to be linked with a
version of OpenSSL or LibreSSL that supports the AES256 and SHA256
algorithms.
20170120:
AFFECTS: users of databases/mysql56-server
AUTHOR: feld@FreeBSD.org
databases/mysql56-server was updated to 5.6.35 which included backported
rc script changes from the mysql57-server port. This broke mysql_optfile in
rc.conf and also forced a sample my.cnf if none existed. MySQL has
some parameters which cannot be changed after a database has been
created, so this caused MySQL to fail to start.
This change was reverted in mysql56-server-5.6.35_1
An additional change was made in mysql56-server-5.6.35_2 to prevent
automatic loading of a sample my.cnf which was causing issues for
users who were running without a my.cnf.
20170117:
AFFECTS: users of EoL'ed FreeBSD versions (<10.3, 11 prior to 11.0)
AUTHOR: amdmi3@FreeBSD.org
The ports system will now refuse to build anything if it's run on
outdated system version. This protects users from unexpected build
failures after code to support EoL'ed systems is removed from the
tree. You may define ALLOW_UNSUPPORTED_SYSTEM to override this and
allow builds, but no support will be provided in case of failures.
20170116:
AFFECTS: users of java/wildfly10
AUTHOR: olgeni@FreeBSD.org
The java/wildfly10 port has been updated to 10.1.0. To complete the
migration you must copy your existing configuration (directories
"appclient", "standalone", and "domain") from /usr/local/wildfly-10.0.0
to /usr/local/wildfly10.
20170115:
AFFECTS: users of net-mgmt/librenms
AUTHOR: dvl@FreeBSD.org
The following is recommended for /var/db/mysql/my.cnf
NOTE: these are global settings. Please read this first:
http://dev.mysql.com/doc/refman/5.7/en/sql-mode.html
[mysqld]
innodb_file_per_table=1
sql-mode=""
20170109:
AFFECTS: users of lang/ruby22
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 2.2 to 2.3.
If you compile your own ports you may keep 2.2 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.2 as default version
#
DEFAULT_VERSIONS+=ruby=2.2
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby23 lang/ruby22
# portmaster -R -r ruby-2.3
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby22:lang/ruby23
# portupgrade -x ruby-2.3.\* -fr lang/ruby23
20170102:
AFFECTS: multimedia/ffmpeg
AUTHOR: jbeich@FreeBSD.org
OPTIMIZED_CFLAGS switched to only use vendor optimizations which
means -ffast-math -fno-finite-math-only are no longer applied. If
you did like the former behavior consider adding
# multimedia/ffmpeg/Makefile.local
OPTIMIZED_CFLAGS_CFLAGS += -ffast-math -fno-finite-math-only
or
# /etc/make.conf
.if ${.CURDIR:M*/multimedia/ffmpeg}
CFLAGS += -ffast-math -fno-finite-math-only
.endif
20161230:
AFFECTS: users of x11/xfce4-terminal
AUTHOR: olivierd@FreeBSD.org
The port has been updated to the latest stable version 0.8.2.
Please, don't active the hidden 'MiscSlimTabs' option in
~/.config/xfce4/terminal/terminalrc, it requires Gtk+ > 3.20.
20161228:
AFFECTS: users of multimedia/mlt
AUTHOR: avilla@FreeBSD.org
MLT Qt plugins have been moved to their own ports, mlt-qt4 and
mlt-qt5. Please, uninstall multimedia/mlt before you update:
# pkg delete mlt
20161227:
AFFECTS: users of security/openvpn, security/openvpn-polarssl
AUTHOR: Matthias Andree <mandree@FreeBSD.org>
The OpenVPN ports have been updated to the new upstream release v2.4,
and their predecessors preserved as openvpn23 and openvpn23-polarssl,
respectively. Note that for the new v2.4 release, the
openvpn-polarssl port has been renamed to openvpn-mbedtls to match the
upstream library's new name.
20161218:
AFFECTS: users of www/nghttp2
AUTHOR: sunpoet@FreeBSD.org
nghttp2 has been split into 2 ports: www/libnghttp2 for core library and
www/nghttp2 for the rest. Please uninstall nghttp2 before you update
this port.
20161216:
AFFECTS: mail/thunderbird, www/seamonkey
AUTHOR: gecko@FreeBSD.org
ENIGMAIL is no longer provided as part of the ports after upstream
dropped binary components in 1.9. Go to Tools -> Add-ons Manager
then type "enigmail" in the search box to install.
20161213:
AFFECTS: users of devel/skalibs, lang/execline, sysutils/s6
AUTHOR: Colin Booth <colin-ports@heliocat.net>
skalibs has undergone a major version bump and compatibility is not
guaranteed for software with a runtime dependency on
libskarnet.so.2.3.9.0. This will not affect lang/execline or
sysutils/s6 as those are statically linked against libskarnet.a.
execline has undergone a major version bump and compatibility is not
guaranteed for software with a runtime dependency on
libexecline.so.2.1.4.5. This will not affect sysutils/s6 as all s6
programs are statically linked against libexecline.a.
s6 has undergone a major version bump and compatibility is not
guaranteed for software with a runtime dependency on
libs6.so.2.2.4.3. Additionally, s6-applyuidgid and s6-setuidgid
have moved from $PREFIX/sbin to $PREFIX/bin. Any scripts calling
those utilities that are not relying on $PATH resolution to find
them will need to be rewritten.
20161207:
AFFECTS: users of www/node
AUTHOR: bradleythughes@fastmail.fm
The www/node port has been updated to node.js v7.2.0, the latest
upstream release. A new port, www/node6, has been created for the
v6.x LTS branch. Users wanting to stay on v6.x can replace www/node
with www/node6 with one of the following commands:
# pkg set -o www/node:www/node6
or
# portmaster -o www/node6 www/node
or
# portupgrade -o www/node6 www/node
20161202:
AFFECTS: users of textproc/p5-Search-Elasticsearch
AUTHOR: tj@FreeBSD.org
As of the 5.01 release of ths package, the client libraries for older
versions of Elasticsearch have started to be shipped seperately. If you are
using this library to access a none 5.X server you will need to install one of
the textproc/p5-Search-Elasticsearch-Client-* ports.
20161126:
AFFECTS: users of security/gpgme-*
AUTHOR: jhale@FreeBSD.org
Gpgme has been updated to 1.8.0.
With it comes the removal of libgpgme-pthread.so in favor of using
libgpgme.so itself as the thread-safe library. Ports that may have
linked to -lgpgme-pthread will now just link to -lgpgme. PORTREVISION
has been bumped on all ports with a dependency on security/gpgme.
The Python module provided by security/py-gpgme has been renamed
from pyme3 to gpg, as well.
Portmaster users:
portmaster -r gpgme
Portupgrade users:
portupgrade -fr security/gpgme
20161121:
AFFECTS: users of graphics/tiff
AUTHOR: antoine@FreeBSD.org
The tiff port was updated to 4.0.7.
The following tools are removed from this release: bmp2tiff, gif2tiff, ras2tiff, rgb2ycbcr and thumbnail.
20161116:
AFFECTS: users of sysutils/bareos-*
AUTHOR: rand@iteris.com
Bareos v1.6.x changed the configuration scheme, from one configuration
file per Bareos component (file daemon, storage daemon, and director)
to several configuration files, in several directories, for each
component. See http://doc.bareos.org/master/html/bareos-manual-main-reference.html
The new scheme will use all files named *.conf in the directory
hierarchies for each component:
/usr/local/etc/bareos/bareos-dir.d/
/usr/local/etc/bareos/bareos-fd.d/
/usr/local/etc/bareos/bareos-sd.d/
To retain the old configuration scheme of one file per component add
appropriate lines such as these to your /etc/rc.conf:
bareos_dir_config="/usr/local/etc/bareos/bareos-dir.conf"
bareos_fd_config="/usr/local/etc/bareos/bareos-fd.conf"
bareos_sd_config="/usr/local/etc/bareos/bareos-sd.conf"
20161113:
AFFECTS: users of devel/libosinfo
AUTHOR: novel@FreeBSD.org
The libosinfo port was separated into three different ports
to follow the upstream split:
- sysutils/osinfo-db-tools: contains the CLI tools
- misc/osinfo-db: contains database with OS data
- devel/libosinfo: the library
As osinfo-db-tools now ships binaries that previously were
part of libosinfo, it's required to delete the old libosinfo
package to prevent conflict because of same files installation:
# pkg delete libosinfo
And then install the new version.
20161112:
AFFECTS: users of security/heimdal
AUTHOR: hrs@FreeBSD.org
Heimdal in the base system and security/heimdal <= 1.5.3_6 use
Berkeley DB to store principals into /var/heimdal/heimdal.db and
the database format is version 3 by default. On the other hand,
security/heimdal 1.5.3_7 or newer use the newer version of
Berkeley DB and the database format is version 9.
These two versions are not compatible with each other. If there is
a mismatch between Heimdal utilities and its database format,
you will get an error like the following:
# /usr/local/sbin/kadmin -l dump
BDB0641 __db_meta_setup: /var/heimdal/heimdal.db: unexpected file type or format
kadmin: hdb_open: opening /var/heimdal/heimdal: Invalid argument
This mismatch can occur in the following three cases:
1. You used Heimdal in the base system and switch to use security/heimdal
after creating /var/db/heimdal.db.
2. You used security/heimdal >= 1.5.3_7 and switch to use one in the
base system.
3. You used security/heimdal < 1.5.3_7 and upgrade it to 1.5.3_7 or later.
To fix this mismatch, you need to dump contents of heimdal.db and
rebuild the database by using kadmin(8) utility.
If you use Heimdal in the base system or older versions of
security/heimdal, and plan to switch to use
security/heimdal >= 1.5.3_7, execute the following command
*after* creating a backup copy of /var/heimdal and installing
security/heimdal:
# /usr/bin/kadmin -l dump /var/heimdal/heimdal.db.dump
# rm /var/heimdal/heimdal.db
# /usr/local/sbin/kadmin -l load /var/heimdal/heimdal.db.dump
# rm /var/heimdal/heimdal.db.dump
The above example assumes security/heimdal is installed into
/usr/local. If your base system is compiled with WITHOUT_KERBEROS
use the following instead:
# db_dump185-5 /var/heimdal/heimdal.db | db_load-5 /var/heimdal/heimdal.db.new
# chown 0600 /var/heimdal/heimdal.db.new
# mv /var/heimdal/heimdal.db.new /var/heimdal/heimdal.db
db_dump and db_load utilitites are installed by databases/db5 as
dependency of security/heimdal.
If you want to switch from security/heimdal to Heimdal in the base
system, use the following:
# /usr/local/sbin/kadmin -l dump /var/heimdal/heimdal.db.dump
# rm /var/heimdal/heimdal.db
# /usr/bin/kadmin -l load /var/heimdal/heimdal.db.dump
# rm /var/heimdal/heimdal.db.dump
20161105:
AFFECTS: users of security/heimdal
AUTHOR: hrs@FreeBSD.org
kadmin(8) in heimdal-1.5.3_5 and prior did not create a database
in /var/heimdal in Berkeley DB format which kdc(8) required. This
problem has been fixed in heimdal-1.5.3_6.
20161104:
AFFECTS: users of mail/mu4e and mail/mu4e-maildirs
AUTHOR: hrs@FreeBSD.org
The package name of mail/mu4e* have been changed from mu4e* to
mu4e*-emacsNN. When upgrading the older versions, this change can
cause the following error which prevents it from upgrading:
pkg-static: mu4e-emacs25-0.9.16 conflicts with mu4e-0.9.16 (installs files into the same place).
If this error occurs, please remove the old packages by using
"pkg delete" manually:
# pkg delete mu4e-0.9.16 mu4e-maildirs-0.8.20160126_1
20161103:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.24. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, assuming you are
migrating from 5.20 to 5.24, do:
First, add to /etc/make.conf:
DEFAULT_VERSIONS+= perl5=5.24
Portupgrade users:
portupgrade -o lang/perl5.24 -f lang/perl5.20
You can now remove the DEFAULT_VERSIONS line added earlier
from /etc/make.conf
Then you will need to rebuild everything that uses libperl.so, you
can do so with:
portupgrade -f `pkg shlib -qR libperl.so.5.20`
If, for some reason, this command fails at one point, it is safe to
run it again, it will not rebuild what it already rebuilt, as the
ports that have been rebuilt no longer depend on libperl.so.5.20 but
on libperl.so.5.24.
Portmaster users:
portmaster -o lang/perl5.24 lang/perl5.20
You can now remove the DEFAULT_VERSIONS line added earlier
from /etc/make.conf
Then you will need to rebuild everything that uses libperl.so, you
can do so with:
portmaster -f `pkg shlib -qR libperl.so.5.20`
If, for some reason, this command fails at one point, it is safe to
run it again, it will not rebuild what it already rebuilt, as the
ports that have been rebuilt no longer depend on libperl.so.5.20 but
on libperl.so.5.24.
20161102:
AFFECTS: users of security/acme-client
AUTHOR: brnrd@FreeBSD.org
The default configuration paths have changed from 'letsencrypt' to
'acme'. Rename the directories used accordingly
mv /usr/local/etc/letsencrypt /usr/local/etc/acme
mv /usr/local/etc/ssl/letsencrypt /usr/local/etc/ssl/acme
mv /usr/local/www/letsencrypt /usr/local/www/acme
Check your scripts to ensure proper operation.
20161030:
AFFECTS: users of mail/squirrelmail
AUTHOR: adamw@FreeBSD.org
For better php70 support, the squirrelmail port has switched from
PEAR database access to PDO. If you are using squirrelmail with
a database backend, you'll need to install a corresponding PDO
database module, such as php56-pdo_sqlite.
20161030:
AFFECTS: users of security/srm
AUTHOR: rakuco@FreeBSD.org
srm has been updated from 1.2.12 to 1.2.15. Since version 1.2.14,
srm defaults to using its "simple" mode to overwrite files (one pass
writing 0x00 to the files) instead of the 35-pass Gutmann method.
20161029:
AFFECTS: users of irc/quassel
AUTHOR: woodsb02@FreeBSD.org
Quassel is now split into two ports / packages; one for providing
the server backend (irc/quassel-core), and one for providing the
client front-end (irc/quassel). Alternatively, the irc/quassel
port can be built with the MONO option enabled to also install
the client and server combined into a single monolithic binary.
20161028:
AFFECTS: users of security/openssl and security/openssl-devel
AUTHOR: brnrd@FreeBSD.org
The shared library versions of OpenSSL have been bumped to avoid
issues with ports' and base's OpenSSL not being binary compatible.
Please rebuild all ports that depend on OpenSSL if you use OpenSSL
from ports.
If you use portmaster:
portmaster -r openssl
If you use portupgrade:
portupgrade -fr security/openssl
20161026:
AFFECTS: users of net-p2p/deluge
AUTHOR: rm@FreeBSD.org
Deluge port has been split out onto CLI part and GUI part. So if user
only needs deluged, net-p2p/deluge-cli should be installed. For full
deluge installation, including GTK+ GUI client, net-p2p/deluge should
be installed as a usual.
Old deluge package should be removed manually first:
# pkg delete deluge
After that install preferred deluge package as usual.
20161018:
AFFECTS: users of x11/xfce4-terminal
AUTHOR: olivierd@FreeBSD.org
The port has been updated to the latest stable version 0.8.0.
A warning appears each time we open new tab:
Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate
widget with...
This issue will disappear with Gtk > 3.21.
20161014:
AFFECTS: users of lang/python3
AUTHOR: antoine@FreeBSD.org
The default version of python3 has changed from 3.4 to 3.5.
If you wish to stick with older version, add "python3=3.4" to your
DEFAULT_VERSIONS variable in /etc/make.conf. To upgrade:
If using portupgrade:
# portupgrade -o lang/python35 lang/python34
If using portmaster:
# portmaster -o lang/python35 lang/python34
20161011:
AFFECTS: users of net-im/ejabberd
AUTHOR: ashish@FreeBSD.org
Before upgrading ejabberd to 16.09, please make sure to backup your
ejabberd data using:
% sudo -u ejabberd -H ejabberdctl backup /path/to/backup/file
In some cases, ejabberd may fail to start, for which a workaround is to
remove the schema.DAT file from /var/spool/ejabberd before starting, and
then restoring everything from the backup using:
% sudo -u ejabberd -H ejabberdctl restore /path/to/backup/file
For more details:
https://github.com/processone/ejabberd/issues/1305
20161005:
AFFECTS: users of audio/squeezeboxserver (now audio/logitechmediaserver)
AUTHOR: woodsb02@FreeBSD.org
With the rename of the audio/squeezeboxserver port to
audio/logitechmediaserver, the server and database are now installed in
different locations by default (/usr/local/share/logitechmediaserver and
/var/db/logitechmediaserver respectively).
If you were an existing user of audio/squeezeboxserver, you should
consider backing up you server configuration files and database before
upgrading to audio/logitechmediaserver. If you wish to override the
default locations for storing the server and database, you can set the
SLIMDIR and SLIMDBDIR variables in your /etc/make.conf when building
the audio/logitechmediaserver port.
20161004:
AFFECTS: mail/roundcube-carddav
AUTHOR: gahr@FreeBSD.org
There is no upgrade path from the 1.0 version. You'll need to:
1. Log off from Roundcube.
2. Manually drop all carddav_* tables from your db backend.
3. Upgrade the mail/roundcube-carddav port.
The new tables will be created upon login. The CardDAV plugin will need to be
reconfigured.
If you are running php < 7.0.0, you'll need to set the plugin option:
$prefs['_GLOBAL']['suppress_version_warning'] = true;
See https://github.com/blind-coder/rcmcarddav/issues/165 for details.
20160927:
AFFECTS: emulators/ppsspp
AUTHOR: jbeich@FreeBSD.org
Qt* GUI was split into separate ports:
emulators/ppsspp-qt4
emulators/ppsspp-qt5
20160927:
AFFECTS: sysutils/android-file-transfer
AUTHOR: jbeich@FreeBSD.org
Qt* GUI was split into separate ports:
sysutils/android-file-transfer-qt4
sysutils/android-file-transfer-qt5
20160922:
AFFECTS: users of databases/pglogical, databases/pglogical-output
AUTHOR: matthew@FreeBSD.org
As of version 1.2.0, databases/pglogical-output has been merged into
databases/pglogical. portmaster or portupgrade users should delete
pglogical-output manually before upgrading.
20160921:
AFFECTS: users of mail/sieve-connect
AUTHOR: alexey@renatasystems.org
Version 0.88 contains two breaking changes:
1. If the Sieve server does not offer STARTTLS, then connections should now
fail.
2. When deriving a remote script name from the local filename, use the
basename and strip off directories.
For additional information see:
http://mail.globnix.net/pipermail/sieve-connect-announce/2016/000012.html
20160919:
AFFECTS: users of net/vtun
AUTHOR: cy@FreeBSD.org
The VTUN_EXTENDED_MODE option has been replaced by -e command line
option.
20160914:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.org
Nginx now creates logs under /var/log/nginx/ and changes default log
names from "nginx-access.log" and "nginx-error.log" to "access.log" and
"error.log" respectively. This is important for the error log because
the location is encoded and touched by nginx during startup regardless
of the configured location for the error log.
See http://trac.nginx.org/nginx/ticket/147 for additional information
on why this happens.
20160914:
AFFECTS: users of deskutils/xfce4-volumed-pulse
AUTHOR: olivierd@FreeBSD.org
The port has been updated to the latest stable version 0.2.2.
Support of xfce4-mixer has been removed, so you can delete
its properties with the following command:
xfconf-query -c xfce4-mixer -p / -rR
20160910:
AFFECTS: users of security/letsencrypt.sh
AUTHOR: riggs@FreeBSD.org
The config filename has been changed upstream from "config.sh"
to "config". Users must rename the current config file manually.
In addition, the default WELLKNOWN location has been changed to
%%PREFIX%%/www/letsencrypt. In order to use the previous default
location, the config file must be updated manually as well.
20160907:
AFFECTS: users of math/galculator
AUTHOR: woodsb02@FreeBSD.org
galculator now uses GTK3 by default. An option exists in the port to revert
to GTK2 if desired.
20160906:
AFFECTS: uses of www/nginx
AUTHOR: marino@FreeBSD.org
Nginx now creates logs under /var/log/nginx/ and changes default log
names from "nginx-access.log" and "nginx-error.log" to "access.log" and
"error.log" respectively. This is important for the error log because
the location is encoded and touched by nginx during startup regardless
of the configured location for the error log.
See http://trac.nginx.org/nginx/ticket/147 for additional information
on why this happens.
20160905:
AFFECTS: users of databases/postgresql96-server
AUTHOR: girgen@FreeBSD.org
The default unix user used by the PostgreSQL daemon has changed to
`postgres' to reflect the long time upstream's convention. Any scripts
you have using the old `pgsql' unix user should be modified when upgrading to
PostgreSQL version 9.6. Older versions of PostgreSQL will continue using
`pgsql' until their end-of-life.
For users with UTF-8 locales in the database: The ICU patch is *activated by
default* for the PostgreSQL-9.6 server. For previous versions it was optional
and default off, but this has changed. Please read the entry here below from
20160811 and understand the consequences of changing between ICU and system
locale for database collation (short version: don't). pg_upgrade requires the
collation method to be the same (or a reindex), while pg_dump/restore does not.
Also, the default home directory for the postgres user is now
/var/db/postgres, and the default data directory for PostgreSQL 9.6 is
/var/db/postgres/data96.
20160829:
AFFECTS: users of x11/nvidia-driver
AUTHOR: cem@FreeBSD.org
The NVidia driver has been updated to version 367.35. Starting with
version 358.09, new kernel module was added, nvidia-modeset.ko. This
new driver component works in conjunction with the nvidia.ko kernel
module to program the display engine of the GPU.
Users that experience hangs when starting X11 server, or observe
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0): "NULL"
messages in their /var/log/Xorg.0.log file should replace ``nvidia''
with ``nvidia-modeset'' in /boot/loader.conf or /etc/rc.conf files,
depending on how they prefer to load NVidia driver kernel module.
20160829:
AFFECTS: users of security/sshguard
AUTHOR: feld@FreeBSD.org
Sshguard has been updated to 1.7.0. There have been several changes to
this release. Notably the hosts and ipfilter backends are no longer
supported. If you need these backends to be supported and you missed
the survey sent out by upstream I urge you to contact upstream.
The hosts backend was previously served by security/sshguard directly.
The additional backends were slave ports with package name suffixes. I
have opted to keep the master/slave port relationship but not choose a
specific backend for security/sshguard. Instead it is now a metaport
which will prompt you for which backend you prefer. If no backend is
configured it will depend on security/sshguard-ipfw, which is the
native FreeBSD firewall. This my be surprising to users who depended
on security/sshguard which only provided hosts/TCP Wrappers blocking,
but there is no replacement at this time.
I would also like to document that sshguard no longer accepts the -e
argument which allowed external scripts to run when sshguard finds a
match. As a result the null backend can no longer be used to create
custom blocking functionality; it only serves as a detection backend.
If the removed backends return due to user demand they will be added
as slave ports for consistency. I apologize for any inconvenience and
lack of notice on the deprecation of these features.
20160815:
AFFECTS: users of mail/rspamd*
AUTHOR: vsevolod@FreeBSD.org
Rspamd users should update Rspamd to 1.3.3 version as soon as possible
and ensure that '/usr/local/etc/rspamd/module.d/fuzzy_check.conf` has
the line `algorithm = "mumhash";` for the "rspamd.com" rule. The more
detailed information could be found on
https://rspamd.com/announce/2016/08/15/rspamd-1.3.3.html
20160815:
AFFECTS: users of dns/powerdns*
AUTHOR: junovitch@FreeBSD.org
PowerDNS Authoritative Server and Recursor 4.0.0+ introduce significant
changes to the configuration files, which need to be handled before
restarting the services. As from the Recursor changelog, "The Lua hook
infrastructure was redone using LuaWrapper; old scripts will no longer
work, but new scripts are easier to write under the new interface."
20160811:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest stable version 2.4 of LibreSSL.
The shared library versions of the libraries have been bumped.
With this update, the patch for the OPENSSL_VERSION_NUMBER has been
removed. This causes issues with a number of ports. Patches for all
ports for which this issues is known can be found on
https://wiki.freebsd.org/LibreSSL/Ports#OPENSSL_VERSION_NUMBER
After upgrading, manually update all packages that depend on any of the
libraries provided by LibreSSL (libssl, libcrypto and libtls) since the
versions of these libraries have changed. Normally, you can obtain the
list of dependent software by running the following command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20160811:
AFFECTS: users of databases/postgresqlNN-server with ICU patch
AUTHOR: girgen@FreeBSD.org
The ICU patch is added to the PostgreSQL-9.5 server. Please note that you
must never change between using the ICU patch and using system locale for
the same database cluster without REINDEXing all TEXT/VARCHAR columns, or
dump and restore your database. Failing to do so will result in corrupted
indexes due to the differences between the locale definitions. ICU will
always be the better choice for speed and correctness.
Also, the ICU patch used to support other Unicode encodings than UTF-8,
but that has been removed due to lack of demand and the complicated testing
required. If you use another Unicode encoding and rely on ICU for collation,
please refrain from upgrading the postgresql server and instead contact the
author named above.
20160722:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: jkim@FreeBSD.org
VirtualBox has been updated to 5.0.26 and it is incompatible with old
kernel modules. You should upgrade emulators/virtualbox-ose-kmod and
load new kernel modules before starting new version, e.g.,
# service vboxnet restart
20160722:
AFFECTS: users of games/stonesoup-*
AUTHOR: lifanov@mail.lifanov.com
The WIZARD option has been renamed to NOWIZARD and is now an opt-out to
better reflect the upstream. If you run a shared game server and would
like the Wizard mode support disabled, please update port options.
20160718:
AFFECTS: users of www/awstats
AUTHOR: adamw@FreeBSD.org
The directory containing icons has changed from ".../icons" to ".../icon".
awstats has, in its suggested configuration file, contained an alias
from /awstatsicons. After applying the awstats-7.5 update, you must
update that alias to point to /usr/local/www/awstats/icon (just remove
the "s" at the end).
20160708:
AFFECTS: users of sysutils/screen
AUTHOR: cy@FreeBSD.org
GNU Screen was updated to version 4.4.0 (r417201). Note that there was
fix to screen message structure field responsible for $TERM handling,
making it impossible to attach to older versions.
20160704:
AFFECTS: users of databases/mysql57-*
AUTHOR: riggs@FreeBSD.org
The default location for my.cnf has changed from "/var/db/mysql/my.cnf"
to "/usr/local/etc/mysql/my.cnf". Existing my.cnf files must be merged
manually with the new default and moved to the new location. To
continue using the my.cnf file at the old location, set "mysql_optfile"
in /etc/rc.conf to point to the location of the existing my.cnf file.
20160701:
AFFECTS: users of www/node5
AUTHOR: bradleythughes@fastmail.fm
Node.js v5.x has reached end of life and has been removed. Users that
have not yet moved to v6.x should do so now by switching to the www/node
port.
20160627:
AFFECTS: users of sysutils/rsyslog7
AUTHOR: brd@FreeBSD.org
Rsyslog 7.x has reached end of life status and is being marked as
depreciated. Rsyslog 8 has been made the default.
20160626:
AFFECTS: users of www/calendarserver
AUTHOR: pi@FreeBSD.org
Please note that updating from the previous version (5.1) to the current
version (8.0) requires manual steps. Please consult the pkg-message for
details.
20160624:
AFFECTS: users of shells/zsh
AUTHOR: adamw@FreeBSD.org
zsh now looks for system-wide conf files in ${PREFIX}/etc, instead of
/etc. If you have files like zshrc, zshenv, zprofile, zlogin, or zlogout
in /etc, either move them to /usr/local/etc or rebuild zsh with the
ETCDIR option on.
Note that this change only affects system-wide conf files, which are not
installed or created by a default installation.
20160621:
AFFECTS: users of www/redmine
AUTHOR: tz@FreeBSD.org
Redmine was updated from 2.6.9 to 3.2.3. Since this an update over
major versions be careful with your update.
For further update instructions please have a look at:
https://www.redmine.org/projects/redmine/wiki/RedmineUpgrade
20160621:
AFFECTS: users of ftp/wget
AUTHOR: vd@FreeBSD.org
Wget 1.18 fixes a security vulnerability (CVE-2016-4971) and the fix
introduces a backward-incompatibility for HTTP->FTP redirects. Any script that
relies on the old behaviour must use --trust-server-names in order to trust
the HTTP response and redirect to the new filename.
20160619:
AFFECTS: users of databases/py-apsw
AUTHOR: rm@FreeBSD.org
SQLite 3.12 completely changed the semantics of VFS.xGetLastError() in an
incompatible way. This required a rewrite of the relevant C, Python and test
code. If you implement or use this method then you have to rewrite your code
too. Also note that running the test suite from an earlier version of APSW
against this or future SQLite versions will result in consuming all memory,
swap or address space (an underlying integer changed meaning).
20160616:
AFFECTS: users of security/openssl*, security/libressl*
AUTHOR: mat@FreeBSD.org
Previously, to tell the ports tree, you needed to set:
WITH_OPENSSL_PORT=yes
And if you wanted a port that was not security/openssl, you needed to add,
for example:
OPENSSL_PORT= security/libressl
Now, all you need to do is:
DEFAULT_VERSIONS+= ssl=libressl
Valid values are base, openssl, openssl-devel, libressl, and libressl-devel.
20160614:
AFFECTS: users of www/node, www/node5, and www/node4
AUTHOR: adamw@FreeBSD.org
node now prefers a few libraries from ports to the versions bundled
with node. However, node cannot use the libssl from LibreSSL. If you
are using LibreSSL as your SSL provider, you must enable the
"BUNDLED_SSL" option when building node.
20160611:
AFFECTS: users of textproc/xmlroff
AUTHOR: hrs@FreeBSD.org
The library part of xmlroff has been separated into textproc/libfo.
Remove the installed xmlroff first when upgrading it because older
xmlroff than 0.6.2_6 have files which libfo installs. A typical
error message is the following:
pkg-static: libfo-0.6.2 conflicts with xmlroff-0.6.2_5 (installs files into the same place). Problematic file: /usr/local/include/libfo-0.6/libfo/area/fo-area.h
20160610:
AFFECTS: users of databases/postgresql-repmgr
AUTHOR: bofh@FreeBSD.org
The port has been repocopied to databases/postgresql-repmgr2 and current
post has been updated to 3.x series. If anyone is still looking forward
to use the 2.x please upgrade as following.
# portmaster -o databases/postgresql-repmgr2 databases/postgresql-repmgr
or
# portupgrade -o databases/postgresql-repmgr2 databases/postgresql-repmgr
Otherwise if you want to move on with 3.x series just use
# portmaster -r databases/postgresql-repmgr
or
# portupgrade -fr databases/postgresql-repmgr
20160605:
AFFECTS: users of www/h2o
AUTHOR: junovitch@FreeBSD.org
File paths no longer have a trailing / appended to them. This enables
directing specific paths to a file but may break existing configurations.
Refer to https://h2o.examp1e.net/configure/file_directives.html and
revise your yaml config appropriately.
20160601:
AFFECTS: users of security/libressl-devel
AUTHOR: brnrd@FreeBSD.org
The port has been updated to the latest "unstable" version of LibreSSL.
The shared library versions of the libraries have been bumped.
With this update, the patch for the OPENSSL_VERSION_NUMBER has been
removed. This causes issues with a number of ports. Patches for many of
these issues can be found on
https://wiki.freebsd.org/LibreSSL/Ports#OPENSSL_VERSION_NUMBER
After upgrading to 2.4.0, manually update all packages that depend on
any of the libraries provided by LibreSSL (libssl, libcrypto and
libtls) since the versions of these libraries have changed. Normally,
you can obtain the list of dependent software by running the following
command:
# pkg info -r libressl-devel
Then you should rebuild all ports depending on libressl-devel to avoid
dangling shared library dependencies. Poudriere and pkg handle this
correctly, portmaster and portupgrade users can use the following to
rebuild all dependent ports.
Portmaster users:
portmaster -r libressl-devel
Portupgrade users:
portupgrade -fr security/libressl-devel
20160527:
AFFECTS: users of mail/opensmtpd-extras (any of them)
AUTHOR: adamw@FreeBSD.org
The invocation for extras has changed. Some extras might fail unless
you pass all options/arguments separated by quotes:
filter myfilter dnsbl "-c /var/chroot/dnsbl" "-h my.dnsbl.com"
Additionally, extras now run in a chroot. Either pass "-C" to skip the
chroot entirely (not recommended), or put all required config files,
resolv.conf, and external binaries into the chroot. For example:
# mkdir -p /var/chroot/dnsbl/etc
# cp /etc/resolv.conf /var/chroot/dnsbl/etc
And pass "-c /var/chroot/dnsbl" to the filter.
20160526:
AFFECTS: users of mail/opensmtpd
AUTHOR: brnrd@FreeBSD.org
Due to changes to the rc-script you must stop smtpd prior to upgrading
mail/opensmtpd to version 5.9.2
# service smtpd stop
Then upgrade OpenSMTPD to version 5.9.2.
Additionally version 5.9.2 changes the file mode bits for two directories.
To allow existing installations to start successfully you must apply the
following changes
# chown -R root:_smtpq /var/spool/smtpd/offline
# chmod -R 770 /var/spool/smtpd/offline
# chmod -R 700 /var/spool/smtpd/purge
After applying the changes, the smtpd daemon can successfully be started.
20160525:
AFFECTS: users of devel/qtcreator
AUTHOR: loise@kde.org
QBS (Qt Build System) was previously shipped as part of qtcreator, now
it is independently available as devel/qbs. However, on upgrading
qtcreator to 3.6.1, the depends will detect qbs through a previously
installed qtcreator port and will not build/install correctly
(devel/qbs won't be installed automatically as depends)
The solution is to pkg remove qtcreator, then building works correctly.
20160523:
AFFECTS: users of databases/db6
AUTHOR: mandree@FreeBSD.org
The databases/db6 port has been updated to release 6.2.23.
This requires manual action in two places:
1. dependent applications need to be recompiled,
2. SQL databases, if any, need to be reindexed.
To obtain a list of ports needing a recompilation,
the following command should provide it:
# pkg info -r db6
Then rebuild db6 and the dependent ports. For pkg users, this should
be transparent.
Portmaster users:
# portmaster -r databases/db6
Portupgrade users:
# portupgrade -fr databases/db6
In order to reindex SQL databases, a db6-upgrade61.sh script is
provided in ${PREFIX}/bin, if and only if the port's SQL option is
enabled. For detailed reindexing instructions, see
http://docs.oracle.com/cd/E17076_05/html/installation/sqlite_ver61.html
and note that the FreeBSD port installs the upgrade61.sh script with a
db6- prefix that you need to add.
20160511:
AFFECTS: users of audio/clementine-player
AUTHOR: sbruno@FreeBSD.org
The audio/clementine-player port has been updated to v1.3.1, the latest
upstream release. The music database code now has a hard dependency on
databases/sqlite having the FTS3_TOKENIZER option enabled. This has
been made the default option in databases/sqlite.
Without this option, clementine-player will crash on startup.
20160510:
AFFECTS: users of biology/seqan
AUTHOR: junovitch@FreeBSD.org
The biology/seqan port has been split into biology/seqan (only the
library) and biology/seqan-apps for the programs based on SeqAn. Both
ports are based on version 2.1.1 of the SeqAn repository. There is a new
biology/seqan1 port with version 1.3 of SeqAn for backwards compatibility,
but this port will likely be deprecated in the next year so please update
your software to SeqAn2.
20160505:
AFFECTS: users of www/node
AUTHOR: bradleythughes@fastmail.fm
The www/node port has been updated to node.js v6.0.0, the latest
upstream release. Users of node.js v5.x are encouraged to upgrade as
soon as possible, as upstream support will end two months from now.
The www/node5 port has been created to aid users transition. Use one of
the following commands to continue using node.js v5.x:
# pkg install node5
or
# portmaster -o www/node5 www/node
or
# portupgrade -o www/node5 www/node
20160503:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
LibreSSL 2.3 has removed SSLv3 support completely which leads to issues
with a number of ports. Patches for many of these issues can be found
on https://wiki.freebsd.org/OpenSSL/No-SSLv3
After upgrading to 2.3.4, manually update all packages that depend on
any of the libraries provided by LibreSSL (libssl, libcrypto and
libtls) since the versions of these libraries have changed. Normally,
you can obtain the list of dependent software by running the following
command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20160501:
AFFECTS: users of mail/dspam
AUTHOR: junovitch@FreeBSD.org
dspam has been modified to no longer run as root:mail by default.
Existing configuration must be adjusted to reflect using a non-privileged
port and the /var/run/dspam directory for PID and socket files. If you
need dspam to run as root for your mail setup, you can use the SETUID
config option to enable the old insecure behavior.
20160229:
AFFECTS: users of www/nginx and www/nginx-devel
AUTHOR: osa@FreeBSD.org
The ${MODULESDIR}, default directory for dynamic modules, has been
changed from ${ETCDIR}/modules to ${PREFIX}/libexec/${PORTNAME}.
It's highly recommended to review existing configuration files of
nginx, i.e. ${PREFIX}/etc/nginx/nginx.conf.
20160424:
AFFECTS: users of net-mgmt/icinga2
AUTHOR: lme@FreeBSD.org
The creation of Icinga2 directories and files in /var is now controlled
by the /etc/rc.conf variable icinga2_mkvar. Earlier ports always
created the /var entries, but could slow startup significantly when /var
was a normal disk rather than a RAM disk. icinga2_mkvar defaults to
"NO".
20160415:
AFFECTS: users of audio/chromaprint
AUTHOR: jhale@FreeBSD.org
chromaprint has been updated to version 1.3.1 and includes a shared
library bump. PORTREVISIONS have been bumped on affected ports.
If you are using binary pkg, 'pkg upgrade' will do the right thing.
Users of portmaster/portupgrade must rebuild all ports which depend
on chromaprint.
Portmaster users:
portmaster -w -r chromaprint
Portupgrade users:
portupgrade -fr audio/chromaprint
20160414:
AFFECTS: users of www/tt-rss
AUTHOR: thierry@FreeBSD.org
Tiny Tiny RSS can use a database running on a separate server.
Previously, in this case, you had to set the option DBLOCAL; this option
has been removed and replaced by a settable run-time flag: now you
should set
ttrssd_local_db="NO"
in your /etc/rc.conf .
20160414:
AFFECTS: users of graphics/kipi-plugin-googledrive and graphics/kipi-plugin-picasaweb
AUTHOR: kde@FreeBSD.org
DigiKam and its related ports have been updated to 4.14.0, the latest
stable upstream release.
The graphics/kipi-plugin-googledrive and graphics/kipi-plugin-picasaweb
have both been merged into the new graphics/kipi-plugin-googleservices
following a move done upstream.
Those two ports must be removed, and graphics/kipi-plugin-googleservices
should be used instead.
20160413:
AFFECTS: users of www/node-devel
AUTHOR: bradleythughes@fastmail.fm
www/node-devel was outdated and has been removed. Upstream no longer
releases a development version. You can use the www/node port to get
node.js 5.x by running one of the following commands:
# pkg install node
or
# portmaster -o www/node www/node-devel
or
# portupgrade -o www/node www/node-devel
20160413:
AFFECTS: multimedia/x264
AUTHOR: jbeich@FreeBSD.org
LSMASH replaced GPAC by default. If you use BATCH=y in /etc/make.conf
and hit below error make sure to re-run "make config".
====> You cannot select multiple options from the MP4 radio
*** Error code 1
20160412:
AFFECTS: users of net/samba42 and net/samba/43
AUTHOR: timur@FreeBSD.org
Samba 4.2.x and 4.3.x ports have been updated to address
BadLock(http://badlock.org) vulnerability, as well as few other
discovered.
Please note that Samba 4.1.x and older versions are also affected by
the issues fixed with this release but are not supported anymore. It is
strongly recommend to upgrade to a recent version at your earliest
convenience.
The security updates include new smb.conf options and a number of
stricter behaviours to prevent Man in the Middle attacks. Between these
changes, compatibility with a large number of older software versions
has been lost in the default configuration.
For more information about the related behaviour changes and the
security issues please visit:
https://www.samba.org/samba/latest_news.html#4.4.2
https://www.samba.org/samba/history/samba-4.3.8.html
https://www.samba.org/samba/history/samba-4.2.11.html
20160411:
AFFECTS: users of databases/influxdb
AUTHOR: cheffo@freebsd-bg.org
To upgrade to InfluxDB 0.12, you must be on version 0.10 and all shards must
be in TSM format (the default storage engine starting with InfluxDB 0.10).
See the 0.10 documentation [1] for how to convert b1 and bz1 shards to TSM. If
any b1 or bz1 shards are present, InfluxDB 0.12 will not start.
Next, you need to update your metastore *before updating to 0.12.* [2]
[1] https://docs.influxdata.com/influxdb/v0.10/administration/upgrading/#convert-b1-and-bz1-shards-to-tsm1
[2] https://docs.influxdata.com/influxdb/v0.12/administration/upgrading/
20160406:
AFFECTS: users of www/pecl-http
AUTHOR: bofh@FreeBSD.org
www/pecl-http has been updated to the latest 3.x stable release, which
supports php70+ and a new port www/pecl-http2 has been created for the
2.x branch.
Should users want to continue to use version 2.x, replace www/pecl-http with
www/pecl-http2 as follows:
Using packages:
# pkg delete pecl-http
# pkg install pecl-http2
Using ports:
# portupgrade -o www/pecl-http2 www/pecl-http
OR
# portmaster -o www/pecl-http2 www/pecl-http
20160404:
AFFECTS: users of lang/ruby21
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 2.1 to 2.2.
If you compile your own ports you may keep 2.1 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.1 as default version
#
DEFAULT_VERSIONS+=ruby=2.1
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby22 lang/ruby21
# portmaster -R -r ruby-2.2
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby21:lang/ruby22
# portupgrade -x ruby-2.2.\* -fr lang/ruby22
20160404:
AFFECTS: mail/spamassassin
AUTHOR: adamw@FreeBSD.org
Support for SSLv3 has been removed from SpamAssassin, because
SSLv3 is a Bad Idea. No direct option is provided to re-enable it.
If your setup requires use of SSLv3, some instructions are available
in FreeBSD PR 208225.
20160331:
AFFECTS: security/clamav-unofficial-sigs
AUTHOR: lukasz@wasikowski.net, sf@maxempire.com
This version of clamav-unofficial-sigs is eXtremeSHOK's fork.
Configuration file location has changed from
%PREFIX%/clamav-unofficial-sigs.conf to
%PREFIX%/clamav-unofficial-sigs/
master.conf and os.conf hold default values, local changes should
be placed in user.conf.
20160324:
AFFECTS: print/ghostscript9-base
AUTHOR: tijl@FreeBSD.org
The default Ghostscript port has changed from print/ghostscript9-base,
which is no longer developed, to print/ghostscript9-agpl-base. Package
users will upgrade automatically. Ports users can stick with the old
port by adding "DEFAULT_VERSIONS+=ghostscript=9" to /etc/make.conf, or
move to the new port with:
portmaster -o print/ghostscript9-agpl-base ghostscript9-base
or: portupgrade -o print/ghostscript9-agpl-base print/ghostscript9-base
And if you have ghostscript9-x11 installed:
portmaster -o print/ghostscript9-agpl-x11 ghostscript9-x11
or: portupgrade -o print/ghostscript9-agpl-x11 print/ghostscript9-x11
Note that print/ghostscript9-agpl-base is licensed under the AGPLv3
while print/ghostscript9-base is licensed under the GPLv3.
20160317:
AFFECTS: security/openvas-client
AUTHOR: tijl@FreeBSD.org
The OpenVAS ports have been updated from version 2 to version 8. All
components have been renamed and rearranged. The old OpenVAS client
no longer exists. Instead there is a web interface provided by
security/greenbone-security-assistant or a command-line interface
provided by security/openvas-cli.
20160311:
AFFECTS: print/hplip
AUTHOR: tijl@FreeBSD.org
HPLIP has been updated to verion 3.16.2. As part of the update support
for the hpijs/foomatic-rip filter has been dropped. This has long been
unsupported upstream. If you used this filter with your printer you'll
have to remove the printer with HP Device Manager and then add it back as
a new device.
20160311:
AFFECTS: print/cups-base, print/cups-client, print/cups-image
AUTHOR: tijl@FreeBSD.org
The cups-base, cups-client and cups-image packages have been combined
into one cups package.
If you build your own ports the easiest way to update is to delete these
packages first and then build and install print/cups.
If you are using binary packages, depending on the packages installed on
your system, pkg(8)'s solver might get confused. In this case do not proceed
with the upgrade but delete first the packages:
pkg delete -fg "cups*"
Then usual upgrade process: pkg upgrade
The device URI of USB printers has changed so you have to adjust the
printer configuration. Go to http://localhost:631/printers/. Click on
your printer and select "Modify Printer" in the Administration drop-down.
You should then be able to select the new URI of the printer. The web
interface requires cookies and JavaScript to function properly so make
sure your browser does not block them.
The package also installs a devd(8) configuration file now that gives
cups access to USB printers. Unless you have any special needs you can
remove any devd(8), devfs.conf(5) or devfs.rules(5) configuration related
to cups that you may have added in the past.
20160306:
AFFECTS: net-mgmt/yaf
AUTHOR: pi@FreeBSD.org
YAF is updated to version 2.8.1 with many new OPTIONS. Please use
the default options to get same behavior as previous version.
20160302:
AFFECTS: audio/alsa-utils, www/firefox, www/firefox-esr, www/seamonkey
AUTHOR: jbeich@FreeBSD.org
ALSA backend in libcubeb as used by Firefox has an unresolved issue
with the OSS patch in audio/alsa-plugins. To avoid excessive CPU
usage when playing HTML5 videos rebuild the port with BUFSZ_P2
option enabled or reset options to default.
However, with BUFSZ_P2 enabled alsa-utils may crash:
$ aplay test.wav
Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Assertion failed: (err >= 0), function set_params, file aplay.c, line 1289.
Aborted by signal Abort trap...
20160229:
AFFECTS: users of security/openssh-portable-devel
AUTHOR: bdrewery@FreeBSD.org
openssh-portable-devel has been removed since it is stale, insecure and
not worth maintaining any longer.
Users should switch back to openssh-portable.
Using packages:
# pkg delete openssh-portable-devel
# pkg install openssh-portable
Using ports:
# portmaster -o security/openssh-portable openssh-portable-devel
OR
# portupgrade -o security/openssh-portable security/openssh-portable-devel
20160228:
AFFECTS: users of mail/postfix
AUTHOR: ohauer@FreeBSD.org
Postfix has been updated to version 3.1, VDA and native SPF is no
longer supported.
- if VDA support is needed, users should stay on mail/postfix211
- SPF support can be added to postfix via one of the mail/*spf* ports
The Dovecot SASL OPTION was removed, Dovecot SASL support is always given
from now on. In addition, for each mail/postfix* port there is now a
mail/postfix*-sasl slave port providing Cyrus SASL as default.
To stay on postfix-2.11.x run the command:
# pkg set -o mail/postfix:mail/postfix211
20160217:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.org
Dynamic modules support has been enabled for the following third-party
modules, in case of usage of these modules please update nginx
configuration file for load these modules:
load_module "modules/ngx_dynamic_upstream_module.so";
load_module "modules/ngx_http_small_light_module.so";
20160214:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.org
Dynamic modules support has been enabled for the following third-party
modules, in case of usage of these modules please update nginx
configuration file for load these modules:
load_module "modules/ngx_http_echo_module.so";
load_module "modules/ngx_http_headers_more_filter_module.so";
load_module "modules/ngx_http_eval_module.so";
load_module "modules/ngx_http_lua_module.so";
load_module "modules/ngx_http_set_misc_module.so";
20160213:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.org
Dynamic modules support has been enabled. In case of usage following
modules please update nginx configuration file for load these modules:
load_module "modules/ngx_http_geoip_module.so";
load_module "modules/ngx_http_image_filter_module.so";
load_module "modules/ngx_http_xslt_filter_module.so";
load_module "modules/ngx_mail_module.so";
load_module "modules/ngx_stream_module.so";
See https://www.nginx.com/blog/dynamic-modules-nginx-1-9-11/ for details.
20160127:
AFFECTS: users of net-im/uTox
AUTHOR: amdmi3@FreeBSD.org
Before upgrading uTox port, please set maximum font scale in the
program options.
20160119:
AFFECTS: users of security/tor, security/tor-devel
AUTHOR: amdmi3@FreeBSD.org
The tor ports now create /var/log/tor subdirectory for tor logs. If
you've used /var/log/tor as a log _file_, you'll need to update your
torrc and move the file before updating the port.
20160118:
AFFECTS: users of mail/rspamd and mail/rmilter
AUTHOR: vsevolod@FreeBSD.org
Rspamd has been updated to the version 1.1.0. If you have used per user
statistics, then please consult changelog for details: your configuration
should be changed.
Rmilter has been updated to the version 1.7.0. Support of SPF and Spamassassin
has been dropped from this project completely. You might also consider
migration from memcahched to redis in this version.
20160113:
AFFECTS: users of sysutils/ansible
AUTHOR: lifanov@mail.lifanov.com
Ansible 2.0.0 introduces a number of incompatible configuration changes.
Please read changelog and migrate current configuration:
https://raw.githubusercontent.com/ansible/ansible/v2.0.0.0-1/CHANGELOG.md
Ansible 1.9.* will be provided as sysutils/ansible1 until the next update
of 2.0 branch.
20160111:
AFFECTS: users of security/easy-rsa
AUTHOR: mandree@FreeBSD.org
The port has been upgraded to version 3. This incurs major changes,
please see ${PREFIX}/share/doc/easy-rsa/doc/EasyRSA-Upgrade-Notes.md
for details.
The old version 2.2.2 has been retained as security/easy-rsa2.
20151227:
AFFECTS: users of games/nethack34
AUTHOR: glewis@FreeBSD.org
The port name and installation location of games/nethack34 have changed
to allow for a port of NetHack 3.6.0. To preserve your save and bones
files do the following after updating:
# sudo cp -p ${LOCALBASE}/share/nethack/save/* ${LOCALBASE}/share/nethack34/save/
# sudo cp -p ${LOCALBASE}/share/nethack/bon* ${LOCALBASE}/share/nethack34/
After verifying the files were copied correctly, remove the playground
directory (as these files are incompatible with NetHack 3.6.0).
# sudo rm -r ${LOCALBASE}/share/nethack
20151219:
AFFECTS: users of net/samba4, net/samba41
AUTHOR: timur@FreeBSD.org
Given version of Samba were marked as deprecated. Please, consider to upgrade.
Samba4 was giving wrong builds with recent version of p5-Parse-Pidl. It was
converted to use bundled version instead and to conflict with the given package.
If you still intend to build net/samba4 - remove p5-Parse-Pidle first.
20151217:
AFFECTS: users of security/tor, security/tor-devel
AUTHOR: amdmi3@FreeBSD.org
Tor rc.d script no longer overrides or forces logfile configuration,
you now need to setup logging by hand. To preserve old behavior, add
the following line to /usr/local/etc/tor/torrc:
Log notice file /var/log/tor
20151215:
AFFECTS: all users of www/node
AUTHOR: koobs@FreeBSD.org
www/node has been updated to the latest 5.x stable release, and a new port
www/node4 has been created for the 4.x LTS branch.
Should users want to continue to use version 4.x, replace www/node with
www/node4 as follows:
Using packages:
# pkg delete node
# pkg install node4
Using ports:
# portupgrade -o www/node4 www/node
OR
# portmaster -o www/node4 node
20151210:
AFFECTS: users of comms/gammu
AUTHOR: vanilla@FreeBSD.org
The python binding of comms/gammu were split from the main port. To get them you
need to install comms/py-gammu.
20151206:
AFFECTS: users of mail/postfixadmin
AUTHOR: riggs@FreeBSD.org
Caveat when updating to version 2.93: If you have an existing
configuration and are NOT using the recommended practice of putting your
settings changes in config.local.php:
Copy config.inc.php to config.local.php prior to upgrading, then revise
config.local.php for the current version afterward.
Postfixadmin will not function correctly unless correct and complete
data structures are placed in config.inc.php. Therefore the file must be
upgraded as part of the package and any changes to config.inc.php will
be overwritten.
Detailed information regarding this procedure is provided in step 3 of
the installation instructions in ${DATADIR}/INSTALL.TXT (by default
/usr/local/share/postfixadmin/INSTALL.TXT).
20151205:
AFFECTS: users of devel/ncurses
AUTHOR: bapt@FreeBSD.org
ncurses has been updated to 6.0.
If you are using binary pkg, 'pkg upgrade' will do the right thing.
Users of portmaster/portupgrade must rebuild all ports which depend
on ncurses.
Portmaster users:
portmaster -w -r ncurses
Portupgrade users:
portupgrade -fr devel/ncurses
20151203:
AFFECTS: users of x11-toolkits/qt4-gui or x11-toolkits/qt5-gui
AUTHOR: kde@FreeBSD.org
Back in mid-2012, pkg-message was added to the port suggesting changes to the
default shared memory limits in loader.conf(5). Since then, the default
limits have been changed and the values suggested by the port are no longer
sensible. If you have changed the following values in loader.conf(5) due to
qt4-gui's or qt5-gui's pkg-message, please considering removing them and
using the default settings:
* kern.ipc.shmall
* kern.ipc.shmmni
* kern.ipc.shmseg
See base r209037 and ports PR 202927 for more context.
20151203:
AFFECTS: users of sysutils/logstash
AUTHOR: junovitch@FreeBSD.org
Logstash has been updated to the 2.1.0 release. The embedded ElasticSearch
instance is no longer supported. If in use, end users must update
logstash.conf to point to the URL of an ElasticSearch instance.
20151130:
AFFECTS: users of net/samba43
AUTHOR: timur@FreeBSD.org
A new version of Samba server that has better integration with Windows 10.
This is still experimental and there were reports that rolling upgrade from
previous version of Samba fails to work.
Please, backup all relevant files from /var/db/samba4/ directory, as well
as configuration files.
Follow https://wiki.samba.org/index.php/Updating_Samba for the upgrade path.
20151130:
AFFECTS: users of net/samba4, net/samba41, net/samba42
AUTHOR: timur@FreeBSD.org
Recent versions of devel/talloc, devel/tevent, databases/tdb, databases/ldb
contained infinit recursive call to the strtol* set of replacement functions,
which lead to coredumps. Unofficial patch was added meanwhile, but now
official version of the fixed libs were released. If your version of
net/samba4 works fine you don't need to recompile it. Other ports were also
upgraded and some bugs were fixed in upstream.
20151122:
AFFECTS: users of audio/audacity
AUTHOR: riggs@FreeBSD.org
Audacity has been upgraded to version 2.1.1. Changes in its settings
processing may prevent it from starting. If this happens, removing its
user-specific configuration directory ~/.audacity-data resolves this.
20151118:
AFFECTS: users of mail/rmilter
AUTHOR: vsevolod@FreeBSD.org
Rmilter now has switched from user postfix to user _rmilter for security
and sanity purposes. You might want to fix the ownership of
/var/run/rmilter to user _rmilter and group mail.
20151105:
AFFECTS: users of deskutils/egroupware
AUTHOR: danilo@FreeBSD.org
EGroupware 1.8 was deprecated and removed from sourceforge.net.
To upgrade to the new version (14.3), make a backup of all files and
database, remove all files from ${PREFIX}/www/eg:
# pkg remove egroupware
# rm -rf ${PREFIX}/www/eg
Install the new egroupware:
# pkg install egroupware
or
# make -C /usr/ports/deskutils/egroupware install clean
Access the setup page on your browser and run the upgrade process
(eg: http://<server>/eg/setup).
20151101:
AFFECTS: users of www/codeigniter
AUTHOR: junovitch@FreeBSD.org
CodeIgniter has been updated to the 3.0.x release branch. End users
must ensure their web applications are compliant with the guidance
in the "Upgrading From a Previous Version" document.
http://www.codeigniter.com/user_guide/installation/upgrade_300.html
CodeIgniter 2.2.x has reached EOL as of 31 October 2015 but may be
installed in the interim from the www/codeigniter22 port.
20151020:
AFFECTS: users of security/keepassx2
Due to a package name change, first remove the existing package
and then reinstall it:
# pkg delete security/keepassx2
# portmaster security/keepassx2
20151019:
AFFECTS: users of www/varnish4
AUTHOR: feld@FreeBSD.org
Varnish has been updated to 4.1.0. As part of the update an effort has
been made to increase the security of the varnish daemons by utilizing
separate UIDs. Users who upgrade will likely run into a permissions
issue as a result. The simplest solution is to delete files varnish
will recreate with the correct permissions and to adjust permissions
of existing log files.
The following changes will allow you to start varnishd, varnishlog,
and varnishncsa successfully:
# rm -r /usr/local/varnish/$(hostname)
# rm /var/run/varnishlog.pid
# rm /var/run/varnishncsa.pid
# chown varnishlog /var/log/varnish.log
# chown varnishlog /var/log/varnishncsa.log
Please also note that the syntax for binding to additional IPs has
changed in 4.1.0. Multiple listening addresses are now specified by
using multiple -a arguments. In rc.conf it would look like this:
varnishd_listen="x.x.x.x:80 -a y.y.y.y:80"
20151015:
AFFECTS: users of devel/subversion, its bindings and www/mod_dav_svn
AUTHOR: lev@FreeBSD.org
The subversion upgdate to 1.9 branch introduces new "old" subversion
port devel/subversion18.
If you don't want to update your subversion installation, run
pkg set -n subversion:subversion18
and add
WITH_SUBVERSION_VER=18
to your /etc/make.conf
20151013:
AFFECTS: users of security/sshguard-ipfw
AUTHOR: feld@FreeBSD.org
The sshguard update to 1.6.2 introduces a rewritten IPFW backend. The
previous approach was to insert individual block rules with a
predefined numbered range. This does not scale well and is not
flexible so the design was scrapped. The new approach utilizes IPFW
tables. The sshguard IPFW backend now inserts offenders into hardcoded
table 22.
To continue blocking the attackers effectively you will need to add a
block rule like the following:
ipfw add deny all from 'table(22)' to any
The release announcement can be found here:
http://sourceforge.net/p/sshguard/mailman/message/34534861/
20151011:
AFFECTS: users of emulators/qemu-sbruno, emulators/qemu-user-static
AUTHOR: sbruno@FreeBSD.org
The Jemalloc update at svn r286871 introduced some TLS enhancements
for MIPS targets that require a bit of workaround. Users who want
to build MIPS packages should update their host systems past r286871
prior to upgrading their qemu-user-static/qemu-sbruno ports.
Discussion about this can be found here:
https://lists.freebsd.org/pipermail/freebsd-mips/2015-October/004018.html
20151006:
AFFECTS: users of www/firefox, www/seamonkey
AUTHOR: gecko@FreeBSD.org
Firefox since 41.0 and SeaMonkey since 2.38 require databases/sqlite3
port built with DBSTAT option enabled (default). Re-run "make config"
if the port(s) fail to build as described in ports/200853.
20150921:
AFFECTS: users of mail/rspamd
AUTHOR: vsevolod@FreeBSD.org
rspamd has been updated to the version 1.0.
For migration from the previous releases, please read the following document:
https://rspamd.com/doc/migration.html
20150919:
AFFECTS: users of multimedia/ffmpeg
AUTHOR: riggs@FreeBSD.org
ffmpeg has been updated to the version 2.8.
If you are using binary pkg, 'pkg upgrade' will do the right thing.
Users of portmaster/portupgrade must rebuild all ports which depend
on ffmpeg.
Portmaster users:
portmaster -w -r ffmpeg
Portupgrade users:
portupgrade -fr multimedia/ffmpeg
20150916:
AFFECTS: users of graphics/jpeg
AUTHOR: antoine@FreeBSD.org
Default implementation of jpeg has been switched from graphics/jpeg to
graphics/jpeg-turbo. To perform the upgrade, use instructions below.
If using binary packages: 'pkg upgrade' will do the right thing. If it
doesn't and complains about 'Cannot solve problem using SAT solver', run
'pkg delete -f jpeg' before 'pkg upgrade'.
If using portmaster:
# portmaster -o graphics/jpeg-turbo jpeg
If using portupgrade:
# portupgrade -f -o graphics/jpeg-turbo graphics/jpeg
If you compile your ports and want to keep using IJG's jpeg implementation,
add this line to your /etc/make.conf file:
JPEG_PORT=graphics/jpeg
20150914:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
Binary package users can ignore this.
The way lang/perl5* ports install themselves has changed. From now on, only
the default Perl port (currently 5.20), or the version listed in
DEFAULT_VERSIONS, will install /usr/local/bin/perl.
If you are NOT using the default version of Perl (as of right now, it is
5.20) you MUST add a line setting the version you are using to your
/etc/make.conf, to preserve /usr/local/bin/perl:
DEFAULT_VERSIONS+= perl5=5.xx
If your Perl package name is not called perl5-5.xx.y but perl5.xx-5.xx.y,
you will need to rename it so that portupgrade and portmaster do not get
confused:
pkg set -n perl5.xx:perl5
After this date, to migrate from one Perl version to the other, you must
first put the DEFAULT_VERSIONS line in your make.conf, and then, for example,
if you want to move from 5.20 to 5.22, do:
pkg set -o lang/perl5.20:lang/perl5.22
portmaster `pkg shlib -qR libperl.so.5.20`
If you do not do that, you will replace your default Perl 5.20 installation
(one that has /usr/local/bin/perl) with an installation that does not have
/usr/local/bin/perl, and it will break everything.
20150908:
AFFECTS: users of print/texlive-base
AUTHOR: hrs@FreeBSD.org
pdfclose and pdfopen utilities in print/texlive-base are now in a separate
port print/xpdfopen. While upgrading print/texlive-base, a conflict may
occur between pdfclose utility installed by an old print/texlive-base and
one being installed by print/xpdfopen. If it occurred on your system,
remove the installed print/texlive-base first by using the following
command:
# pkg delete -f texlive-base
20150901:
AFFECTS: users of editors/libreoffice
AUTHOR: jkim@FreeBSD.org
editors/libreoffice has been updated to 5.0.1. However, FreeBSD 9.x is
no longer supported because it requires C++11-capable library installed
in the base. If you cannot upgrade your system or still want 4.3.x for
some reason, use editors/libreoffice4.
20150822:
AFFECTS: users of print/ghostscript*
AUTHOR: hrs@FreeBSD.org
print/ghostscript{7,8,9,9-agpl} have been split into
print/ghostscript{7,8,9,9-agpl}-{base,x11}.
print/ghostscript*-nox11 ports have been removed.
The -base installs Ghostscript binaries, libgs, and other data files
and it depends on no X11 library. The -x11 installs a small shared
library to enable x11* devices in the installed -base package.
In most cases, Ghostscript is installed as a dependency. A port/package
which requires Ghostscript will automatically pick up -base, and
when x11* devices required it will pick up -x11 in addition.
If one wants to install Ghostscript manually and full compatibility
with the previous versions, just install -x11 because it installs
-base as a dependency. Combination of the two provides the same
functionality as before.
20150821:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
OpenSSH 7.0 disables support for:
* SSH protocol 1
* 1024-bit diffie-hellman-group1-sha1 key exchange
* ssh-dss, ssh-dss-cert-* host and user keys
* legacy v00 cert format
See http://www.openssh.com/txt/release-7.0 for more information and
http://www.openssh.com/legacy.html for how to re-enable some of these
algorithms.
20150820:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
The Glorious Glasgow Haskell Compiler has been updated to version
7.10.2 and Haskell Platform has been removed. As a result, it is
recommended to rebuild or reinstall all the dependent ports and the
lang/ghc port itself in one of the following ways:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
In case of pkg(8), it is probably safer to remove all the GHC-dependent
packages along with GHC and reinstall everything from scratch. For
example:
# pkg query "%ro" ghc > ghc-pkgs.txt
# pkg delete -y lang/ghc
In ghc-pkgs.txt, check and remove all the packages that have been moved,
then:
# pkg install -y `cat ghc-pkgs.txt`
20150818:
AFFECTS: users of sysutils/s6
AUTHOR: Colin Booth <colin@heliocat.net>
s6-notifywhenup has been removed as of v2.2.0.0. Any run scripts
using readyness notification must be updated to use a notification
fd instead.
s6-svc options have changed for sending syncronous up/down timeouts.
Any management or wrapper scripts using those options will need to
be updated.
20150817:
AFFECTS: everybody who still uses <UNIQUENAME>_SET/UNSET in make.conf
AUTHOR: mat@FreeBSD.org
The use of <UNIQUENAME>_SET/UNSET has been deprecated for a long time,
replaced by <OPTIONS_NAME>_SET/UNSET. It is now not supported any more.
A warning will be issued telling you what to do, for example:
$ make
/!\ WARNING /!\
You are using perl_SET which is not supported any more, use:
lang_perl5.20_SET= DEBUG
20150816:
AFFECTS: users of sysutils/s6
AUTHOR: Colin Booth <colin@heliocat.net>
s6-notifywhenup is deprecated and will be removed in the next version
of s6. Any run scripts depending on that program should be updated to
use an in-servicedir notification-fd file as described under
"Readyness notification support" in s6-supervise.html.
20150812:
AFFECTS: users of net-mgmt/icinga and net-mgmt/icinga2
AUTHOR: lme@FreeBSD.org
The Icinga port has been split into two ports: net-mgmt/icinga-core
which contains the Icinga 1.x backend and net-mgmt/icinga-classicweb
which contains the Icinga classic web (CGI) interface. The latter can
be both used with Icinga 1.x and the Icinga 2 port (net-mgmt/icinga2).
A new meta-port net-mgmt/icinga was added which depends on both new
ports, so updating the Icinga port should be transparent.
20150812:
AFFECTS: users of sysutils/moosefs-master and other moosefs packages
AUTHOR: feld@FreeBSD.org
MooseFS ports have been updated to 2.0.72-1. Upstream has been
providing a private package repository to distribute newer releases of
MooseFS. These changes have now made it into the ports tree. This has
resulted in splitting up the sysutils/moosefs-master port into several
new ports:
sysutils/moosefs-cli
sysutils/moosefs-cgi
sysutils/moosefs-cgiserv
sysutils/moosefs-metalogger
sysutils/moosefs-netdump
You may need to install these additional ports/packages to restore the
complete functionality of your MooseFS cluster. Please review the
upstream documentation.
http://moosefs.com/documentation/moosefs-2-0.html
20150809:
AFFECTS: users of sysutils/xfce4-power-manager
AUTHOR: olivierd@FreeBSD.org
After upgrading to 1.5.2, by default a label is displayed next to the
panel icon (it shows percentage and remaining time).
To hide this label, a new property /xfce4-power-manager/show-panel-label
must be created:
xfconf-query -c xfce4-power-manager \
-p /xfce4-power-manager/show-panel-label -n -t int -s 0
Possible values are:
- 0 -> does not display label
- 1 -> displays only percentage
- 2 -> displays only remaining time
- 3 -> displays only percentage and remaining time (default value)
20150806:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
After upgrading to 2.2.2, manually update all packages that depend on
any of the libraries provided by LibreSSL (libssl, libcrypto and
libtls) since the versions of these libraries have changed. Normally,
you can obtain the list of dependent software by running the following
command:
# pkg info -r libressl
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies. Poudriere and pkg handle this correctly,
portmaster and portupgrade users can use the following to rebuild all
dependent ports.
Portmaster users:
portmaster -r libressl
Portupgrade users:
portupgrade -fr security/libressl
20150805:
AFFECTS: users of sysutils/tracker
AUTHOR: kwm@FreeBSD.org
The new tracker version does not build if the old version is installed.
# pkg delete -f tracker
After use your upgrade tool of choice.
20150802:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
After upgrading, you will need to review all your configuration, as
there are some configuration changes between 5.4.x and 5.7.1.
20150726:
AFFECTS: users of ukrainian/monacofonts
AUTHOR: mi@aldan.algebra.com
The destination-directory used by monacofonts port was altered.
The fonts-location changed from koi8u-monaco/ to koi8-u-monaco/
Users are advised to modify the path set in their xorg.conf files.
20150720:
AFFECTS: users of print/texlive-base and other TeXLive packages
AUTHOR: hrs@FreeBSD.org
TeXLive in Ports Collection has been updated to TL2015. To upgrade
installed old packages, upgrading of "tex-*" packages is required.
If you have a problem with upgrading, please send it to
freebsd-tex@FreeBSD.org and/or file a PR.
20150711:
AFFECTS: users of graphics/gdal
AUTHOR: sunpoet@FreeBSD.org
Due to changes in header files, please deinstall gdal first while updating
from 1.x to 2.0.
20150708:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
After upgrading to 2.2.1, manually update all packages that depend on
any of the libraries provided by LibreSSL (libssl, libcrypto and
libtls) since the versions of these libraries have changed. Normally,
you can obtain the list of dependent software by running the following
command:
pkg query -e '%n = libressl' %ro
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies.
20150707:
AFFECTS: users of net-mgmt/netmagis-*
AUTHOR: pgollucci@FreeBSD.org
Netmagis-* ports have been upgraded to 2.3.0. Upgrading from
previous version require a database schema upgrade.
See http://netmagis.org/upgrade.html
20150702:
AFFECTS: users of multimedia/ffmpeg
AUTHOR: riggs@FreeBSD.org
ffmpeg has been updated to the latest version from the 2.7 branch.
If you are using binary pkg, 'pkg upgrade' will do the right thing.
Users of portmaster/portupgrade must rebuild all ports that depend
on it.
Portmaster users:
portmaster -w -r ffmpeg
Portupgrade users:
portupgrade -fr multimedia/ffmpeg
20150702:
AFFECTS: users of net/ptpd2-devel
AUTHOR: skreuzer@FreeBSD.org
net/ptpd2 has been upgraded to version 2.3.1
net/ptpd2-devel is now deprecated and has been removed
If using portupgrade:
# portupgrade -o net/ptpd2 net/ptpd2-devel
If using portmaster:
# portmaster -o net/ptpd2 net/ptpd2-devel
20150628:
AFFECTS: users of www/varnish, www/pecl-varnish,
www/varnish-libvmod-header, www/varnish-nagios
AUTHOR: feld@FreeBSD.org
Varnish 3.x has reached End of Life status and has been removed from
the ports tree. If you were using www/varnish we urge you to to update
to www/varnish4. The upgrade guide can be found here:
https://www.varnish-cache.org/docs/trunk/whats-new/upgrade-4.0.html
www/varnish-libvmod-header and www/varnish-nagios have been updated to
versions that work with Varnish 4.x. You should not lose access to
this software.
www/pecl-varnish was updated to the latest release which has added
support for Varnish 4.x. Please note that it appears some
functionality has been lost. This is unfortunate but out of our
control. Details can be found here:
http://pecl.php.net/package-changelog.php?package=varnish
If for some reason you need www/varnish to exist in your ports tree
for a bit longer you may consider instead following the 2015Q2 branch.
Do note however that Varnish 3.x will not be receiving updates or
security patches from upstream.
20150624:
AFFECTS: users of devel/p5-Test-Tester and devel/p5-Test-use-ok
AUTHOR: adamw@FreeBSD.org
The Test::Tester and Test::use::ok modules have been rolled into
devel/p5-Test-Simple, and are included in perl 5.22. The p5-Test-Tester
and p5-Test-use-ok modules will be removed in one month.
If you use either of those ports and have perl-5.22 installed:
pkg delete p5-Test-Tester p5-Test-use-ok
If you use either of those ports and have perl-5.20 or lower installed:
portmaster -o devel/p5-Test-Simple p5-Test-Tester
portmaster -o devel/p5-Test-Simple p5-Test-use-ok
20150615:
AFFECTS: users of security/libressl
AUTHOR: brnrd@FreeBSD.org
After upgrading libressl, manually update all packages that depend on
this library since its version has changed. Normally, you can obtain the
list of dependent software by running the following command:
pkg query -e '%n = libressl' %ro
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies.
20150614:
AFFECTS: users of audio/libmusicbrainz5
AUTHOR: jhale@FreeBSD.org
libmusicbrainz5 has been updated to 5.1.0. Please rebuild all ports that
depend on it. PORTREVISIONS have been bumped on dependent ports.
If you use portmaster:
portmaster -w -r libmusicbrainz5
If you use portupgrade:
portupgrade -fr audio/libmusicbrainz5
20150613:
AFFECTS: users of multimedia/avidemux26-*
AUTHOR: riggs@FreeBSD.org
avidemux26 has been renamed to avidemux
If you are using binary pkg, 'pkg upgrade' will do the right thing.
Users of portmaster/portupgrade have to take a manual step:
Portmaster users:
portmaster -o multimedia/avidemux multimedia/avidemux26
Portupgrade users:
portupgrade -o multimedia/avidemux multimedia/avidemux26
20150610:
AFFECTS: users of databases/postgresql84-server
AUTHOR: girgen@FreeBSD.org
PostgreSQL-8.4 EOL was reached in July 2014. To upgrade to a later version of
choice, you need to do a dump+restore of the database.
Please follow the instructions at:
http://www.postgresql.org/docs/8.4/static/install-upgrading.html
20150527:
AFFECTS: users of sysutils/xfce4-power-manager
AUTHOR: olivierd@FreeBSD.org
Before upgrading, you must stop xfce4-power-manager daemon:
xfce4-power-manager --quit
20150519:
AFFECTS: users of sysutils/webmin and sysutils/usermin
AUTHOR: olgeni@FreeBSD.org
After upgrading to Perl 5.20 the /usr/bin/perl link will no longer
be available. You will have to check your perl-path files and
change the path of the Perl interpreter to "/usr/local/bin/perl":
/usr/local/etc/webmin/perl-path
/usr/local/etc/usermin/perl-path
20150513:
AFFECTS: users of lang/perl5*
AUTHOR: mat@FreeBSD.org
The default Perl version has been switched to Perl 5.20. If you are using
binary packages to upgrade your system, you do not have anything to do, pkg
upgrade will do the right thing. For the other people, assuming you are
migrating from 5.18 to 5.20, do:
Portupgrade users:
portupgrade -o lang/perl5.20 -f lang/perl5.18
portupgrade -f `pkg shlib -R libperl.so.5.18|tail +2`
Portmaster users:
portmaster -o lang/perl5.20 lang/perl5.18
portmaster -f `pkg shlib -R libperl.so.5.18|tail +2`
NOTE:
Perl has been removed from base more than ten years ago, so it was way past
time for the /usr/bin/perl symlink to be removed from the port. If for
some strange reason, you still need it, you will have to create it
manually.
IMPORTANT:
In case you have not updated your system in a while, and specifically,
followed the 20141126 instructions regarding the new Perl layout, you
should follow those more extensive instructions rather than the
conservative presented here.
20150510:
AFFECTS: users of mail/postfix mail/postfix-current
AUTHOR: ohauer@FreeBSD.org
The following OPTIONS where renamed to match the default used in most all other ports
- SASL2 -> SASL
- OPENLDAP -> LDAP
If any of the old OPTIONS was enabled before, please re-run "make config".
20150508:
AFFECTS: users of www/iojs
AUTHOR: linpct@gmail.com
iojs has been updated to 2.0.0. The binary modules may need to be
rebuilt due to V8 version ABI change.
20150506:
AFFECTS: users of net/asterisk13 with PJSIP (default on) and SRTP (default off) options enabled
AUTHOR: madpilot@FreeBSD.org
This applies ONLY TO USERS COMPILING FROM PORTS:
To avoid dependency problems, you must remove the pjsip port
before upgrading asterisk13.
# pkg delete pjsip
# portmaster -a
These steps are unnecessary for those using binary packages.
Please see the 20150323 entry for background about this problem.
20150501:
AFFECTS: users of graphics/qgis
AUTHOR: brd@FreeBSD.org
Following OPTIONS have been renamed in 2.8.1_1 to match upstream:
- MAPSERVER to SERVER
20150427:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
Following OPTIONS are being removed in 5.4.5p1:
- LDAP
- SQLITE
- MYSQL
- PGSQL
- REDIS
They are disabled/removed in upstream since 5.4.4p1, but did not get removed
from port.
20150420:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to 55.1. Please rebuild all ports that depends on it
If you use portmaster:
portmaster -w -r icu
If you use portupgrade:
portupgrade -fr devel/icu
20150419:
AFFECTS: users of emulators/wine-devel
AUTHOR: gerald@FreeBSD.org
The COMPHOLIO option in emulators/wine-devel has been renamed to
STAGING to align with the upstream evolution of that project.
20150417:
AFFECTS: users of audio/bcg729
AUTHOR: tijl@FreeBSD.org
The Mediastreamer plugin included in this package has been separated into
a new port audio/msbcg729.
20150409:
AFFECTS: users of security/sguil
AUTHOR: feld@FreeBSD.org
security/sguil was erroneously provisioned a UID that conflicted with
the dns/dnscrypt-proxy port. A new UID and GID of 991 has been issued.
Existing users will be able to upgrade the sguil packages without
issue. The existing UID will continue to be used. If you do a clean
install of security/sguil on a new server and migrate files or
intentionally delete the sguil user and group and reinstall you may
run into permissions issues.
Examples include the /var/run/sguild and /usr/local/etc/sguild directories.
20150406:
AFFECTS: users of emulators/xen emulators/xl and sysutils/xen-tools
AUTHOR: bapt@FreeBSD.org
sysutils/xen-tools has been renamed sysutils/xen-guest-tools
emulators/xl has been renamed sysutils/xen-tools
emulators/xen has been renamed emulators/xen-kernel
A new emulators/xen has been introduced, it is a metaport that depends on
emulators/xen-kernel and sysutils/xen-tools
20150403:
AFFECTS: users of irc/rbot
AUTHOR: bdrewery@FreeBSD.org
Ruby Bot now has a new upstream maintainer. The project has been updated
to work with Ruby 2.0+. Some migration is needed to move away from
BDB regristry files. The guide for that is at
https://github.com/ruby-rbot/rbot/wiki/MigrationGuide
rbotdb can be used to backup a BDB database and then restore it to a working
format for the new rbot. Update your conf.yaml after with 'core.db: tc'
once converted.
20150331:
AFFECTS: users of www/mod_dav_svn
AUTHOR: ohauer@FreeBSD.org
Subversion modules are no longer activated in httpd.conf!
To activate the subversion apache modules a dedicated file
will be installed as modules.d/220_subversion.conf
20150324:
AFFECTS: users of dns/bind9*
AUTHOR: mat@FreeBSD.org
This is only for FreeBSD 10.0+.
BIND auto chroot has been added back to the named rc script. As enabling it
by default would most certainly break people's setup, it is not. To enable
it, and chroot it in /var/named, add the following line to your rc.conf file:
named_chrootdir="/var/named"
On first launch, the rc script will move the /usr/local/etc/namedb directory
into the chroot, and create a symlink to it.
Note that, if you're running from within a jail, you need to have a
/var/named/dev devfs created beforehand, with the null and random devices.
20150323:
AFFECTS: users of net/asterisk* and net/pjsip ports
AUTHOR: madpilot@FreeBSD.org
Due to conflicts between base OpenSSL and ports provided OpenSSL
library, which is required by net/libsrtp, the srtp support has
to be removed from the default asterisk13 port configuration,
otherwise a not working binary would be generated.
To get SRTP support working in the asterisk ports make sure all
dependencies are linked against the same SSL library implementation
to avoid runtime conflicts. On 10.1 everything will work fine
unless ports SSL libraries are explicitly installed. On older OS
versions(10.0 and earlier) you will need to compile all ports
with WITH_OPENSSL_PORT=yes.
To get working SRTP support in asterisk13 with the pjsip backend
it is also needed to enable the EXTSRTP option in the pjsip port.
If the CURL option is enabled also make sure the ftp/curl port
is using a GSSAPI implementation linking to the same SSL
implementation the other ports are using (BASE or NONE if you're
using base OpenSSL, GSSAPI_HEIMDAL GSSAPI_MIT otherwise). If an
incompatible option is being used the curl module will cause
asterisk to fail on startup due to mixing calls to OpenSSL from
base and from ports.
20150322:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
The port now uses VersionAddendum for the port version string. Setting
the value to "none" in your sshd_config and restarting openssh will allow
removing the version from the banner.
20150321:
AFFECTS: users of x11-servers/xorg-server and other X servers
AUTHOR: bapt@FreeBSD.org
All fonts ports have been modified to respect XDG and install in
share/fonts
The Xorg servers now are looking there by default
If you experience font related issues, view the output of
# fc-list
If the list appears incomplete or has fonts still pointing to
/usr/local/lib/X11/fonts you may forcibly update the font cache:
# fc-cache -fs
20150317:
AFFECTS: users of editors/openoffice-4 and editors/openoffice-devel
AUTHOR: truckman@FreeBSD.org
Contrary to what is stated in pkg-message, openoffice-4 and
openoffice-devel have stored user settings in ~/.openoffice.org-devel/4
since r325370 (2013-08-25). This update expects user settings to reside
in the more standard ~/.openoffice.org/4.
To preserve your user settings, rename or copy them from
~/.openoffice.org-devel/4 to ~/.openoffice.org/4. when installing this
update to apache-openoffice-4.1.1_7 or
apache-openoffice-devel-4.2.1652526_2,3.
20150313:
AFFECTS: users of net/serviio
AUTHOR: netchild@FreeBSD.org
The Java Polling Watch Service used in Serviio 1.5.1 is fixed. If you
unchecked "Keep library automatically updated" with 1.5 (as recommended
in the 20150206 entry) you can enable it again.
20150309:
AFFECTS: users of net-mgmt/netdisco
AUTHOR: dgeo@centrale-marseille.fr
netdisco version has been upgraded to netdisco2
After upgrading, you will need to review all your configuration, as
this new version won't read old config files.
You'll be able to keep your data though netdisco-deploy command
20150305:
AFFECTS: users of x11-wm/xfce4 and multimedia/xfce4-parole
AUTHOR: olivierd@FreeBSD.org
Xfce 4.12 has been imported. Please use the following instructions to
upgrade.
For package users:
# pkg upgrade
For ports users:
# portmaster -a
# portmaster x11-wm/xfce4
GStreamer 1.0 is enabled by default in Parole media player.
Xfce 4.12 now depends of Adwaita icon theme. If you are upgrading from
Xfce 4.10 you probably still have the Tango or GNOME theme selected.
Open the Settings Manager and select Appearance. Inside dialog box switch
to the Icons tag and select the "Adwaita" entry in the list.
20150304:
AFFECTS: users of security/libressl
AUTHOR: vsevolod@highsecure.ru
After upgrading of libressl you should manually update all packages that
depending on this library since its version has been changed. Normally,
you could obtain the list of dependent software by running the following
command:
pkg query -e '%n = libressl' %ro
Then you should rebuild all ports depending on libressl to avoid dangling
shared library dependencies.
20150301:
AFFECTS: users of lang/ruby20
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 2.0 to 2.1.
If you compile your own ports you may keep 2.0 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 2.0 as default version
#
DEFAULT_VERSIONS+=ruby=2.0
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade -f
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby21 lang/ruby20
# portmaster -R -r ruby-2.1
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby20:lang/ruby21
# portupgrade -x ruby-2.1.\* -fr lang/ruby21
20150227:
AFFECTS: users of games/trigger
AUTHOR: makc@FreeBSD.org
games/trigger has been split and renamed to games/trigger-rally
and games/trigger-data ports. Deinstall previous version
before upgrading.
20150224:
AFFECTS: users of devel/qt4-linguist
AUTHOR: makc@FreeBSD.org
Linguist tools have been moved from qt4-linguist port to new
devel/qt4-linguisttools port. Deinstall qt4-linguist before
upgrading.
20150224:
AFFECTS: users of lang/ruby19
lang/ruby19 has reached its end-of-life and has been removed. The
default version has been 2.0 for a while. Other available versions
are Ruby 2.1 and Ruby 2.2.
Users who have DEFAULT_VERSIONS=ruby=1.9 in their /etc/make.conf are
encouraged to remove it or change it to an available version.
20150224:
AFFECTS: users of net-p2p/bitcoin (cli utilities)
The bitcoin-cli and bitcoin-tx utilities have been re-packaged into
a separate port. If you require these programs, or use the bitcoin-cli
program to access the daemon or the GUI, install net-p2p/bitcoin-utils
to reinstall them.
20150220:
AFFECTS: users of PHP
The default PHP version has been updated from 5.4 to 5.6.
If you use binary packages you should make a list of php packages
before running 'pkg upgrade':
# pkg info php5\* > ~/installed-php-ports-list
After the upgrade, check with such list if all your php extensions
are still installed, and reinstall them if needed.
20150213:
AFFECTS: users who upgraded from FreeBSD 7.x or older with "make world" but never ran "make delete-old"
AUTHOR: antoine@FreeBSD.org
Dependency registration has been reworked.
If you encounter the following error, you may have stale magic files
for file(1):
===> bar-x depends on shared library: libfoo.so - not found
You can remove the stale /usr/share/misc/magic.mime{,.mgc} files
manually or run "make delete-old" in ${SRCDIR}.
20150207:
AFFECTS: users of mail/opensmtpd-devel
AUTHOR: ashish@FreeBSD.org
MYSQL, PGSQL, LDAP, and REDIS options are removed from port, as
they're moved upstream to a separate project, which is yet to
release snapshots. If you need those options, then please install
"mail/opensmtpd" port instead. To do that:
If using portupgrade:
# portupgrade -o mail/opensmtpd mail/opensmtpd-devel
If using portmaster:
# portmaster -o mail/opensmtpd mail/opensmtpd-devel
20150206:
AFFECTS: users of net/serviio
AUTHOR: netchild@FreeBSD.org
The java dependency changed from java 7 (java/openjdk7 if you haven't
installed another java 7 implementation) to java 8 (e.g. java/openjdk8).
If serviio is the only reason that java 7 is installed, you can delete
java 7 after the update to serviio 1.5.0.
The Java Polling Watch Service used in Serviio 1.5 aggressively searches
for file system updates. Until the Serviio poller is re-enabled in 1.5.1,
consider unchecking "Keep library automatically updated" if you have a
large media collection or are concerned about CPU/disk usage.
20150204:
AFFECTS: users of databases/mysql55-(server|client)
AUTHOR: ale@FreeBSD.org
The default MySQL version has been updated from 5.5 to 5.6.
If you compile your own ports you may keep 5.5 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep MySQL 5.5 as default version
#
DEFAULT_VERSIONS+=mysql= 5.5
If you wish to update to the new default version, you need to first stop any
running server instance. Then, you will need to follow these steps, depending
on installed packages.
# pkg set -o databases/mysql55-client:databases/mysql56-client
# pkg set -o databases/mysql55-server:databases/mysql56-server
# pkg upgrade
20150118:
AFFECTS: users of www/thttpd
AUTHOR: danfe@FreeBSD.org
thttpd was updated to version 2.26, which brings several user-noticeable
changes to the port:
- Default WWW root was changed from ${PREFIX}/www/data to more expected
(and standard) ${WWWDIR} (${PREFIX}/www/thttpd), be sure to check and
adjust your thttpd configuration file and/or web layout accordingly;
- Default CGI pattern was changed to "/cgi-bin/*"; this goes better in
line with default installation;
- Default data MIME type was changed to "application/octet-stream";
- thttpd's own htpasswd(1) program, which was previously installed as
thttpdpasswd(1) to avoid conflict with other webservers, is now being
renamed to thtpasswd(1); this not just makes it shorter, but is more
consistent with popular GNU/Linux distributions;
- Index pages for directories are not generated by default from now on
for security reasons; an option (INDEXES) is provided to turn them
back on if they are wanted;
- IPREAL option (to respect (pass on) "X-Forwarded-For" header) is now
turned on by default: it is often required when thttpd is used as a
CGI server behind nginx (http://wiki.nginx.org/ThttpdCGI).
20150113:
AFFECTS: users of www/pecl-http
AUTHOR: vanilla@FreeBSD.org
The pecl-http has been upgraded to version 2.1.4, and the new version is
not compatible with the old one. If you need the "old" 1.7.6, you can
find it in www/pecl-http1.
20150111:
AFFECTS: users of lang/python3
AUTHOR: demon@FreeBSD.org
The default version of python3 has changed from 3.3 to 3.4.
If you wish to stick with older version, add "python3=3.3" to your
DEFAULT_VERSIONS variable in /etc/make.conf. To upgrade:
If using portupgrade:
# portupgrade -o lang/python34 lang/python33
If using portmaster:
# portmaster -o lang/python34 lang/python33
20150109:
AFFECTS: users of audio/speex
AUTHOR: tijl@FreeBSD.org
The audio/speex port has been updated to 1.2rc2 and one of the libraries
it installed has been split off into a new port audio/speexdsp. Before
you can update audio/speex you must first delete the old package using
"pkg del -f speex".
20150101:
AFFECTS: users of net/unison and net/unison-nox11
AUTHOR: madpilot@FreeBSD.org
Unison has been upgraded to version 2.48, which uses a different wire
protocol than 2.40 did. In order to support synchronization with
other computers where Unison is still at version 2.40, a new port
net/unison240 has been created. It provides unison240 and if that is
GTK2-enabled, also unison240-text. This unison240 port can be
installed in parallel with the existing net/unison port.
20141230:
AFFECTS: users of deskutils/xpad
AUTHOR: jgh@FreeBSD.org
deskutils/xpad has been moved to deskutils/xpad3, since 4.x has been around
for a while.
Should you wish to stick with legacy branch at this time;
# portmaster -o deskutils/xpad deskutils/xpad3
20141225:
AFFECTS: users of graphics/png
AUTHOR: antoine@FreeBSD.org
The PNG library has been updated to version 1.6.16. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r png
If you use portupgrade:
portupgrade -fr graphics/png
20141224:
AFFECTS: users of lang/neon29
AUTHOR: ohauer@FreeBSD.org
The port www/neon29 was renamed to www/neon and updated to version 0.30.1
If you use pkg, simply upgrade:
# pkg upgrade
If you use portmaster, rebuild ports that depend on neon:
# portmaster -o www/neon www/neon29
# portmaster -R -r neon
20141219:
AFFECTS: users of x11/xorg and all xorg ports
AUTHOR: dumbbell@FreeBSD.org
The X.Org server (x11-servers/xorg-server) is updated to 1.14. All
ports which provide X.Org drivers must be updated simultaneously, i.e.
x11-drivers/xf86-*, emulators/virtualbox-ose-additions, net/tigervnc,
etc.
The input device autodetection backend is switched from HAL to devd.
If you configure your keyboard layout through HAL .fdi files, you need
to migrate this configuration to plain X.Org configuration files.
Up-to-date instructions and a description of the changes brought by
this update are detailed in a blog post:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/
20141219:
AFFECTS: users of net-mgmt/xymon-server
AUTHOR: feld@FreeBSD.org
Xymon has been updated to 4.3.18. A major change is the replacement of
the individual cgi shell scripts with symlinks to a cgi program written
in C. This is to mitigate shellshock on Linux systems where the
/bin/sh -> /bin/bash. FreeBSD users were not exposed except in the
most unusual and unsupported circumstances. However, this is an
important update for security. This change could break your
configuration as Henrik describes here:
> NOTE: Replacing the shell script wrappers means that the cgioptions.cfg
> file is no longer processed as a shell script. The new wrapper works
> fine with the default version of cgioptions.cfg, but it you have
> modified it in a way that it relies on being processed by a shell, then
> it will break.
20141219:
AFFECTS: users of audio/abcde
AUTHOR: gblach@FreeBSD.org
In audio/abcde dependency has been changed from audio/py-eyed3-06
to audio/py-eyed3. Before updating audio/abcde to 2.6 you must manually
deinstall audio/py-eyed-06:
# pkg delete -f py\*-eyed3-06
20141218:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
OpenSSH 6.7 disables some insecure ciphers by default, such as arcfour
and blowfish. You may have clients using these over LAN where security is
considered less important for the connection. For these cases you may need
to update your Ciphers entry in your sshd_config to enable them again.
See http://mgalgs.github.io/2014/10/22/enable-arcfour-and-other-fast-ciphers-on-recent-versions-of-openssh.html
20141217:
AFFECTS: users of lang/perl5.*
AUTHOR: mat@FreeBSD.org
Perl now links all .so it builds with libperl.so, it makes upgrading from one
Perl major version to another way easier. For binary package users, it means
pkg upgrade will detect the libperl.so.x.yy change, and reinstall the
affected packages. For users using ports, it will save rebuild time as it's
easier to detect what ports really need to be rebuilt.
Ports users are encouraged to rebuild ports that install files in SITE_ARCH.
If using Perl 5.18, run:
With portupgrade:
portupgrade -f `find /usr/local/lib/perl5/site_perl/mach/5.18 -name '*.so'|xargs pkg which -qo|sort -u`
With portmaster:
portmaster `find /usr/local/lib/perl5/site_perl/mach/5.18 -name '*.so'|xargs pkg which -qo|sort -u`
20141216:
AFFECTS: users of security/openssh-portable, security/openssh-portable66
AUTHOR: bdrewery@FreeBSD.org
All patches have been fixed for version 6.7. It is no longer required to use
the security/openssh-portable66 port.
The LPK option was removed from security/openssh-portable as it has been
deprecated since May 2013. Use AuthorizedKeysCommand as a replacement.
20141215:
AFFECTS: users of comms/spandsp-devel
AUTHOR: pawel@FreeBSD.org
comms/spandsp has been upgraded to version 0.0.6
comms/spandsp-devel is now deprecated and set for removal, all ports using
it were converted to use newer comms/spandsp. Before upgrade you must
remove comms/spandsp-devel so that ports can pick up new dependency:
# pkg delete -f spandsp-devel
20141215:
AFFECTS: users of emulators/linux_base-f10 and emulators/linux_base-c6
AUTHOR: sbruno@FreeBSD.org
The CentOS ports are now the default for stable/10 (after revision 275807).
See UPDATING entry 20141209 for details on migration of systems.
20141214:
AFFECTS: users of TeXLive
AUTHOR: hrs@FreeBSD.org
Several scripts in print/texlive-base have been moved to
devel/tex-kpathsea. Upgrading them can fail because texlive-base
depends on tex-kpathsea, and the new tex-kpathsea tries to install
files which were installed by the old texlive-base. The following
error message indicates this situation:
pkg-static: tex-kpathsea-6.2.0_1 conflicts with texlive-base-20140525_3 (installs files into the same place). Problematic file: /usr/local/bin/kpsewhere
To solve this problem, remove both of tex-kpathsea and texlive-base first
and install the new versions:
# pkg delete -f tex-kpathsea texlive-base
20141209:
AFFECTS: users of emulators/linux_base-f10 and emulators/linux_base-c6
AUTHOR: xmj@FreeBSD.org
The CentOS ports infrastructure has replaced Fedora 10 as default.
1. Please delete all remaining f10 ports/packages:
# pkg delete -f linux_base-f10 linux-f10-\*
2. Persistently update the Linux kernel version in /etc/sysctl.conf:
compat.linux.osrelease=2.6.18
This step is necessary on all FreeBSD versions, apart from 11.0-CURRENT
(after revision 271982).
3. Reinstall all software depending on Linux emulation.
As an example, reinstall linux-firefox:
# portmaster -r linux-firefox
or
# portupgrade -f www/linux-firefox
or
# pkg install linux-firefox
If difficulties are encountered, please follow the UPDATING entry 20140922
but skip step 2 (OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS
in /etc/make.conf). In case these steps do not fix the issues, please submit
an issue report in Bugzilla and send an email to FreeBSD's emulation@ mailing
list.
Users who need to continue using Fedora 10 base and userland should do the
following instead:
1. Add these lines to /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f10
OVERRIDE_LINUX_NONBASE_PORTS=f10
2. Downgrade the Linux kernel version in /etc/sysctl.conf on FreeBSD versions
newer than and including 11.0-CURRENT (after revision 271982).
compat.linux.osrelease=2.6.16
This is all that is needed to continue using an existing Fedora 10 Linux base
and userland.
20141208:
AFFECTS: users of ports-mgmt/poudriere, ports-mgmt/poudriere-devel
AUTHOR: bdrewery@FreeBSD.org
8.4 jails created with Poudriere 3.1, or poudriere-devel-3.0.99.20141117
should be recreated with 'jail -d' and 'jail -c'. This fixes pkg(8)
crashes.
20141208:
AFFECTS: users of databases/postgresql??-(server|client)
AUTHOR: marino@FreeBSD.org
PostgreSQL version 9.3 is now the default. To upgrade from a version
lower than 9.3, follow the instructions on the PostgreSQL.org website.
http://www.postgresql.org/docs/9.3/interactive/upgrading.html
Please note that the pg_upgrade program is installed by the
databases/postgresql93-contrib port
When using binary packages, if you only use the client port, you can
issue the following command to follow the default version:
# pkg set -o databases/postgresql92-client:databases/postgresql93-client
20141205:
AFFECTS: users of polish/kadu
AUTHOR: pawel@FreeBSD.org
Before running kadu 1.x for the first time upstream developers
advise to backup your ~/.kadu directory.
20141203:
AFFECTS: users of ports-mgmt/poudriere
AUTHOR: bdrewery@FreeBSD.org
Poudriere has been updated to 3.1.0. See the release notes at
https://github.com/freebsd/poudriere/wiki/release_notes_31 for
information on changed features and required setup.
20141130:
AFFECTS: users of devel/gettext (close to everyone)
AUTHOR: tijl@FreeBSD.org
The devel/gettext port has been split up in devel/gettext-runtime, a
lightweight package containing runtime libraries, and devel/gettext-tools,
a package containing developer tools. The devel/gettext port still exists
as a metaport.
You must first delete the existing installation of gettext and then
reinstall it. This will break sudo, so you *must* do this in a root
shell (sudo -i) if you use sudo.
# pkg delete -f gettext
# portmaster devel/gettext
Or for portupgrade users:
# pkg delete -f gettext
# portinstall devel/gettext
Or for binary users:
# pkg delete -f gettext
# pkg upgrade
20141127:
AFFECTS: users of lang/perl5.*
AUTHOR: mat@FreeBSD.org
There was a nasty bug introduced in the update below, it was introduced in
SVN revision 373476 and corrected in 373485. If you get errors looking like
this one:
===> Registering installation for p5-Params-Util-1.07_1 as automatic
pkg-static: lstat(/usr/ports/devel/p5-Params-Util/work/stage/usr/local/./usr/local/lib/perl5/site_perl/mach/5.16/auto/Params/Util/.packlist): No such file or directory
*** [fake-pkg] Error code 74
You will have to wipe your ports tree clean. If using portsnap, with:
portsnap extract
If using subversion:
svn revert -R
20141127:
AFFECTS: users of lang/perl5.*
AUTHOR: mat@FreeBSD.org
The .packlist files are back, if you upgraded all your p5- ports yesterday
and need them, you will need to reinstall them again, see yesterday's update
for instructions.
20141126:
AFFECTS: users of multimedia/x264
AUTHOR: xmj@FreeBSD.org
With the recent split of multimedia/x264 in library and binary and library
components, if an application that uses libx264 is updated before x264 itself,
multimedia/libx264 will conflict with the existing x264 package. Delete
this package before continuing any update that depends on it:
# pkg delete -f x264
Install the updated x264 and/or upgrade the other applications that
depend on libx264, such as ffmpeg.
20141126:
AFFECTS: users of lang/perl5.*
AUTHOR: mat@FreeBSD.org
The directories where Perl modules are installed has changed. All
affected ports' PORTREVISION have been bumped, so upgrading should
be as painless as possible. The old directories have been kept in
the default Perl @INC to make it even more painless.
The default Perl has been switched to lang/perl5.18. These examples
are for switching from lang/perl5.16, if you are running a different
version, replace lang/perl5.16 with the origin of the Perl you have
installed.
Binary package users:
# pkg upgrade -f
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.18):
portupgrade -o lang/perl5.18 -f lang/perl5.16
2) Reinstall everything that depends on Perl:
portupgrade -fr lang/perl5.18
Portmaster users:
portmaster -o lang/perl5.18 lang/perl5.16
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl5-
Note: If the "perl5-" glob matches more than one port you will need to specify
the name of the installed Perl package explicitly. You can get its name
by running: pkg info perl5
20141125:
AFFECTS: users of EFL libraries
AUTHOR: gblach@FreeBSD.org
EFL libraries has been merged into one port. Before installing devel/efl
you must deinstall old EFL libraries:
# pkg delete -f eina eet evas evas-\* ecore\* eio efreet embryo edje \
ethumb emotion
# make -C /usr/ports/devel/efl install clean
20141125:
AFFECTS: users of x11-wm/e17-module*
AUTHOR: gblach@FreeBSD.org
Enlightenment has been updated to 0.19.1. Some of e-modules can't be build
with updated Enlightenment, these modules has been marked as broken.
E-modules which work with new Enlightenment has been renamed to
x11-wm/e-module-*. To update these modules you must call the following
commands (substituting the name of module in place *):
# portmaster -o x11-wm/e-module-* x11-wm/e17-module-*
# portmaster -o x11-wm/e-modules x11-wm/e17-modules
or
# portupgrade -fo x11-wm/e-module-* x11-wm/e17-module-*
# portupgrade -fo x11-wm/e-modules x11-wm/e17-modules
20141123:
AFFECTS: users of security/heimdal
AUTHOR: hrs@FreeBSD.org
The header and library files have been moved from PREFIX/{include,lib} to
PREFIX/{include,lib}/heimdal at r373047 to fix a library dependency
confusion when software attempts to link a Heimdal library in base and
an external library in LOCALBASE/lib at the same time.
All of packages which depend on security/heimdal have to be recompiled
and reinstalled because of this library location change.
20141119:
AFFECTS: users of x11/gnome2, graphics/clutter and lang/vala
AUTHOR: kwm@FreeBSD.org
GNOME 3.14 was imported. Because this is a big change some manual help is
needed. Please use the following instructions to update.
Make a list of the installed ports:
# pkg info > ~/installed-ports-list
Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
guile gcalctool gnome-media libgnomekbd gnome-themes at-spi
# pkg delete gnome-screensaver gnome-applets bug-buddy \
evolution-exchange evolution-webcal gnome-system-tools \
seahorse-plugins gnome-control-center
For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3
For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3
After these steps, check with the list we made earlier if your favorite
ports are still installed, and reinstall them if needed.
20141117:
AFFECTS: users of security/openssh-portable
AUTHOR: bdrewery@FreeBSD.org
Most of the optional patches for OpenSSH do not apply to the 6.7 update yet.
The 6.6 version has been copied to security/openssh-portable66 if you require
the use of one of the optional ports.
20141109:
AFFECTS: users of multimedia/mediabrowser
AUTHOR: woodsb02@gmail.com
The default MediaBrowser database/configuration/logs/media metadata
storage directory has moved from /usr/local/mediabrowser to
/var/db/mediabrowser. Users are advised either to move the contents of
the old directory to the new location, or to add a mediabrowser_data_dir
entry to /etc/rc.conf.
20141029:
AFFECTS: users of devel/libvirt
AUTHOR: jgh@FreeBSD.org
Application state and resource information has been changed from older
path of /usr/local/var to /var. Users are advised to copy over contents
of old var directory to new location if they wish to preserve resources
from the old setup.
20141019:
AFFECTS: users of x11/kde4-runtime
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.14.2. Several files have been
moved between packages, therefore the following action is required
before running any pkg/port upgrade utility:
# pkg delete -f kde-runtime-4\*
20141008:
AFFECTS: users of lang/ruby19
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 1.9 to 2.0.
If you compile your own ports you may keep 1.9 as the default version by
adding the following lines to your /etc/make.conf file:
#
# Keep ruby 1.9 as default version
#
DEFAULT_VERSIONS+=ruby=1.9
If you wish to update to the new default version, you need to first stop any
software that uses ruby. Then, you will need to follow these steps, depending
upon how you manage your system.
If you use pkgng, simply upgrade:
# pkg upgrade
If you use portmaster, install new ruby, then rebuild all ports that depend
on ruby:
# portmaster -o lang/ruby20 lang/ruby19
# portmaster -R -r ruby-2.0
If you use portupgrade, install new ruby, then rebuild all ports that depend
on ruby:
# pkg delete -f ruby ruby-iconv portupgrade
# make -C /usr/ports/ports-mgmt/portupgrade install clean
# pkg set -o lang/ruby19:lang/ruby20
# portupgrade -x ruby-2.0.\* -fr lang/ruby20
20141003:
AFFECTS: xorg users
AUTHOR: bapt@FreeBSD.org
The WITH_NEW_XORG setting has been activated by default on all versions
of FreeBSD, which allows us to have packages for xorg 1.12 and kde4.
Please be aware that on systems that only support syscons
switching virtual terminals or exiting X
results in a black screen or the last image of their desktop
(like a screenshot) being presented. Commands can still be typed blindly.
Most, if not all, systems should be using vt(4) and this can be enabled
by setting kern.vty=vt in /boot/loader.conf and reboot to activate.
20141001:
AFFECTS: xorg users
AUTHOR: bapt@FreeBSD.org
The WITH_NEW_XORG setting has been activated by default on FreeBSD 10.0
and above, which allows us to have packages for xorg 1.12 and kde4.
Please be aware that on systems that only support syscons
switching virtual terminals or exiting X
results in a black screen or the last image of their desktop
(like a screenshot) being presented. Commands can still be typed blindly.
Most, if not all, systems should be using vt(4) and this can be enabled
by setting kern.vty=vt in /boot/loader.conf and reboot to activate.
20140930:
AFFECTS: users of mail/maildrop
AUTHOR: madpilot@FreeBSD.org
Due to the way pkg works please note that the configuration
variables MAILDROP_SUID and MAILDROP_SGID, despite keeping their
old names, are now required to contain a valid username and
groupname existing on the system in which the package will be
installed, while in the past numeric uids and gids worked fine.
Wrong values will cause pkg to skip installing the setuid binaries
on the system.
Please check your configuration.
20140929:
AFFECTS: users of comms/usbmuxd
AUTHOR: avilla@FreeBSD.org
libusbmuxd.so was split from comms/usbmuxd into comms/libusbmuxd.
Remove usbmuxd before upgrading to avoid conflicts:
# pkg delete -f usbmuxd
If you need the daemon usbmuxd(1), you can reinstall the package
after the upgrade.
20140928:
AFFECTS: users of deskutils/calibre
AUTHOR: madpilot@FreeBSD.org
The dependency on graphics/py-imaging in calibre has been changed
to using the graphics/py-pillow port.
Due to this change automatic updating of the port will not work
correctly.
It is suggested to remove calibre and py-imaging from the system
and then reinstall calibre again using binary packages or ports.
20140927:
AFFECTS: users of net/foreman-proxy
AUTHOR: mm@FreeBSD.org
In version 1.6 Foreman Smart Proxy splits its configuration into multiple
ruby files located in PREFIX/etc/foreman-proxy/settings.d.
The configuration of each service (dhcp, dhs, bmc, etc.) has been moved
into a dedicated file.
You can use a bundled script to convert your old settings to new settings:
PREFIX/share/foreman/extra/migrate_settings.rb
20140926:
AFFECTS: users of shells/bash
AUTHOR: bdrewery@FreeBSD.org
Bash supports a feature of exporting functions in the environment with
export -f. Running bash with exported functions in the environment will
then import those functions into the environment of the script being ran.
This resulted in security issues CVE-2014-6271 and CVE-2014-7169, commonly
known as "shellshock". It also can result in poorly written scripts being
tricked into running arbitrary commands.
To fully mitigate against this sort of attack we have applied a non-upstream
patch to disable this functionality by default. You can execute bash
with --import-functions to allow it to import functions from the
environment. The default can also be changed in the port by selecting the
IMPORTFUNCTIONS option.
20140926:
AFFECTS: users of net/asterisk and net/asterisk11
AUTHOR: madpilot@FreeBSD.org
The asterisk ports have been modified to have the LUA option
turned on by default to make such functionality available to users
of binary packages.
Some care should be taken before upgrading by people not using Lua
to avoid the sample extensions.lua file from being loaded on reload
after updating the asterisk port/pkg.
Users compiling from ports not interested in LUA support are advised
to disable the option before updating.
People using binary packages(or not wanting to disable the LUA
option in the port) not using the Lua functionality should add:
noload => pbx_lua.so
to the PREFIX/etc/asterisk/modules.conf file, if using the
autoload=yes option in that same file. People not autoloading
modules don't need to perform any special action.
If asterisk is rebooted and the pbx_lua module gets loaded on a
system were it should not, it will load the example extensions.lua
configuration file adding unexpected logic to your dialplan. In
such a case following the above steps and reloading asterisk will
fix the problem.
20140922:
AFFECTS: users of emulators/linux_base-f10 and emulators/linux_base-c6
AUTHOR: xmj@FreeBSD.org
The complete drop-in replacement linux-c6 port infrastructure is in
ports and will shortly replace the current linux-f10- ports as default.
To switch to the linux-c6 infrastructure:
0. Back up all your vital information!
1. Remove the current linux base port and all linux-f10- ports:
# pkg delete -f linux_base-f10 linux-f10-\*
2. Add these lines to /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=c6
OVERRIDE_LINUX_NONBASE_PORTS=c6
3. Make sure no Linux application is running.
4. Update the Linux kernel version in /etc/sysctl.conf:
compat.linux.osrelease=2.6.18
Make it take effect immediately:
# sysctl compat.linux.osrelease=2.6.18
5. Install emulators/linux-c6.
These steps are usually sufficient. If there are difficulties, expand
step 1 to:
1a. Remove all ports which depend on the linux base port.
1b. Remove the linux base port.
1c. Clean the /compat/linux/ directory.
If there are any other difficulties not fixed by these extended steps,
please submit an issue report in Bugzilla and send an email to
FreeBSD's emulation@ mailing list.
20140909:
AFFECTS: users seeing build errors about missing *.la files
AUTHOR: tijl@FreeBSD.org
We are in the process of adjusting or, if possible, removing libtool archives
(*.la files) from all ports because they can otherwise cause overlinking
between packages. This is the problem where in the dependency chain A->B->C
an extra link is added from A to C even if A does not use C directly. This
makes some updates to port C expensive because then both A and B have to be
rebuilt instead of just B.
This is mostly behind the scenes work that you won't notice. In fact most
ports have already been converted. You may however run into build errors
about missing *.la files if a port update in the past went wrong and left
behind *.la files with references to other *.la files that are no longer
there. In this case, please run the following command:
find /usr/local/lib -name '*.la' | xargs grep -l 'libfoo\.la' | xargs pkg which
(Replace libfoo\.la with the *.la file that is missing.)
This command will print a list of *.la files that refer to the missing *.la
file and what package they belong to. First, where it says "not found in
the database", remove the *.la file. After removing all such files, where
it says "installed by package X", rebuild X. Eventually the list printed by
that command will be empty and the build error should be gone.
20140826:
AFFECTS: users of ports-mgmt/pkg, ports-mgmt/pkg-devel
AUTHOR: bdrewery@FreeBSD.org
Pkg has been updated to 1.3.7. This fixes registration and tracking of
shared libraries. All earlier versions of Pkg incorrectly marked some
shared libraries and used the wrong name for some.
Please note announcement for special instructions at:
http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000086.html
- Users need to run 'pkg update -f' and 'pkg check -Ba' after upgrading to
pkg-1.3.7 and before updating any other packages. This avoids needing to
reinstall anything not needed due to changed shlibs.
For binary package users:
# pkg install ports-mgmt/pkg
# pkg update -f
# pkg check -Ba
# pkg upgrade
For port users:
# make -C /usr/ports/ports-mgmt/pkg build deinstall install clean
# pkg check -Ba
- People building packages for serving to other systems need to rebuild
all packages with 1.3.7.
20140823:
AFFECTS: users of graphics/libjpeg-turbo
AUTHOR: adamw@FreeBSD.org
libjpeg-turbo installs its own unique library (libturbojpeg.so) and
a drop-in replacement for libjpeg.so. The drop-in replacement has been
split off into graphics/jpeg-turbo; libjpeg-turbo now installs only
libturbojpeg.so.
If you were using the libjpeg.so from graphics/libjpeg-turbo, you
should install graphics/jpeg-turbo AFTER upgrading the libjpeg-turbo
port.
20140823:
AFFECTS: users of TeXLive
AUTHOR: hrs@FreeBSD.org
TeXLive in Ports Collection has been updated to TL2014.
When upgrading print/texlive-base on a system which has
TL2012 packages, the following error may occur:
pkg-static: texlive-base-20140525 conflicts with texlive-texmf-20120701_4
Please remove texlive-texmf-20120701_4 first in that case.
If you still get a similar "conflict of install files" error,
please remove all of tex-* and texlive-* packages and then
see if ${PREFIX}/share/texmf-dist directory are empty. If not,
installing TeXlive can fail. Removing files in the directory
manually will fix the installation problem.
20140821:
AFFECTS: users of databases/db4, databases/db4[1-7]*
AUTHOR: mandree@FreeBSD.org
HEADS UP: for some applications that store their data in Berkeley DB
databases, you may have to export the data before the upgrade and
reload it afterwards. Detailed instructions are at
<https://wiki.freebsd.org/Ports/BerkeleyDBCleanup>.
The older databases/db4* ports providing versions 4.0 to 4.7
inclusively have been removed, and 4.8 has been deprecated.
The default Berkeley DB version is now 5.3.
(6.x has a different license, but will be eligible as default on
systems that build ports from source and have db6 installed.)
All enabled and working ports have been changed such that they use
Berkeley DB 4.8 or newer, and an -exp run has been made.
After you have performed the first steps from the Wiki documentation,
and have arrived at a step that reads "build all applications", then
type as privileged user and without the hash sign:
# Tools/scripts/BDB-upgrade-helper.sh
The helper script requires that ports-mgmt/portmaster or
.../portupgrade is installed, will try to upgrade your applications
with either of these tools (portmaster preferred), and if that succeeds,
it will attempt to delete the packages if confirmed interactively.
20140815:
AFFECTS: users of graphics/ilmbase and graphics/OpenEXR
AUTHOR: mandree@FreeBSD.org
The OpenEXR and ilmbase (Industrial Light and Magic) shared object
names have changed. You must rebuild all packages that require either
of these libraries, by using one of these commands:
# portmaster -r ilmbase -r OpenEXR
or
# portupgrade -fr graphics/ilmbase graphics/OpenEXR
The PORTREVISIONs of all ports that require ilmbase and/or OpenEXR
have been bumped.
20140810:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
The Glorious Glasgow Haskell Compiler has been updated to version
7.8.3 and Haskell Platform to 2014.2.0.0. Hence it is recommended to
rebuild or reinstall all the dependent ports and the lang/ghc port
itself by one of the following commands:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
If you use pkg(8) then it is just safer to remove all the GHC-dependent
packages along with GHC and reinstall everything from scratch.
Something alone these lines may work:
# pkg query "%ro" > ghc-pkgs.txt
# pkg delete -y lang/ghc
# pkg install -y `cat ghc-pkgs.txt | grep -Ev "/hs-(haskeline|terminfo|transformers|xhtml)"
20140803:
AFFECTS: users of security/p5-openxpki
AUTHOR: wg@FreeBSD.org
The following ports have been integrated into security/p5-openxpki:
security/p5-openxpki-client
security/p5-openxpki-client-scep
security/p5-openxpki-deployment
Before update make sure to remove the old packages:
# pkg remove security/p5-openxpki-client
# pkg remove security/p5-openxpki-client-scep
# pkg remove security/p5-openxpki-deployment
20140802:
AFFECTS: users of astro/stellarium
AUTHOR: danfe@FreeBSD.org
Stellarium was updated to version 0.13.0. It's a new major release, and
it is based on Qt version 5 now. For those who are not comfortable with
upgrading to the new Qt, previous Stellarium version (0.12.4) was copied
over to `astro/stellarium-qt4' port.
20140731:
AFFECTS: users of www/ajaxplorer
AUTHOR: madpilot@FreeBSD.org
The ajaxplorer project was renamed to pydio.
Due to this update some manual steps will need to be performed
after updating the port.
IMPORTANT: Perform a backup of the ajaxplorer installation and
the databases backing it(if you're using that feature).
First manually remove the ajaxplorer port and install www/pydio
afterwards.
Further steps will be available in the pkg-message, which can
be shown with these commands:
# pkg info -D pydio
Please also read the upgrading notes at:
http://pyd.io/pydio-core-5.2.0#Upgrading
20140728:
AFFECTS: users of net/GeoIP
AUTHOR: adamw@FreeBSD.org
GeoIP no longer ships with the GeoIP database. To continue using GeoIP,
you MUST fetch the database after upgrading by running geoipupdate.sh.
20140727:
AFFECTS: users of comms/qpage
AUTHOR: marino@FreeBSD.org
The default configure file location has changed from
${LOCALBASE}/etc/qpage.cf to ${LOCALBASE}/etc/qpage.conf
You will likely want to move the old configure file to the new location
after updating if it contains custom settings.
20140725:
AFFECTS: users of cad/netgen
AUTHOR: stephen@FreeBSD.org
Before you update this port the old one should be removed. (This is
because the build may try to link to libraries that are in
${LOCALBASE}/lib rather than in ${WRKSRC}.)
20140724:
AFFECTS: users of dns/mydns-ng
AUTHOR: danilo@FreeBSD.org
The dns/mydns-ng port no longer has the suffix (-mysql|-pgsql). Before
you update this port the old one must be removed:
pkg remove mydns-ng-mysql
or
pkg remove mysql-ng-pgsql
20140723:
AFFECTS: users of devel/libevent
libevent1 has been replaced by libevent2 via the compatibility layer.
All applications that used libevent1 must be rebuilt.
Please remove libevent1 before upgrading, by running:
pkg delete -f libevent
20140723:
AFFECTS: users of security/scanlogd
AUTHOR: tgyurci@gmail.com
The security/scanlogd port now creates scanlogd user and group. Previous
scanlogd user and group must be removed before updating to not conflict
with the one created by the port:
pw userdel scanlogd
pw groupdel scanlogd
20140723:
AFFECTS: users of TeX
AUTHOR: bapt@FreeBSD.org
TeXLive is now the default teX provider.
Please remove all TeX-related packages based on teTeX.
20140722:
AFFECTS: users of mail/exim
AUTHOR: vsevolod@FreeBSD.org
The behaviour of expansion of arguments to math comparison functions (<,
<=, =, =>, >) was unexpected, expanding the values twice. Please update
your configuration if you have relied on such an expansion.
20140722:
AFFECTS: users of multimedia/mediainfo
AUTHOR: sunpoet@FreeBSD.org
mediainfo has been split into 3 ports: libzen, libmediainfo and mediainfo.
Please uninstall mediainfo before you update this port.
20140722:
AFFECTS: users of games/bsdgames
AUTHOR: adamw@FreeBSD.org
Please disregard any prior instructions about moving your game data to
/usr/local/var/games. If you have done this, please move it back to
/var/games.
20140714:
AFFECTS: users of databases/db6
AUTHOR: mandree@FreeBSD.org
Oracle Berkeley DB 6 has been upgraded to version 6.1.19. Since the
previous 6.0 version, the log file format has changed in 6.1.
Depending on applications used, you may need to take action BEFORE you
upgrade. For details, please see the online upgrade manual at
<http://docs.oracle.com/cd/E17076_04/html/upgrading/upgrade_process.html>
<http://docs.oracle.com/cd/E17076_04/html/installation/upgrade_61_toc.html>
Note: if you've got Apache installed and depending on db6, you may
need to upgrade it separately BEFORE upgrading other ports, such as
Apache modules.
After that, you must rebuild all applications that link to db6 because
the shared library name has changed with the upgrade. To do that:
If you use portmaster:
portmaster -w -r db6-
If you use portupgrade:
portupgrade -fr databases/db6
20140714:
AFFECTS: users of net/linphone-base
AUTHOR: tijl@FreeBSD.org
Linphone has been updated to version 3.7.0 and the linphone-base port
has been split into separate components. You must first delete the
linphone-base package before you can update ports that depend on it.
pkg del -f linphone-base
or
pkg_delete -f linphone-base\*
20140713:
AFFECTS: users of mail/postfix-current
AUTHOR: sahil@FreeBSD.org
This is a significant update; so, please carefully review the
RELEASE_NOTES to identify which incompatible changes impact your
environment. Of particular note are changes to the Postfix
build/install procedure.
Please backup main.cf, master.cf and any other important files
associated with your Postfix setup before updating.
20140713:
AFFECTS: users of www/apache22
AUTHOR: ohauer@FreeBSD.org
The default version was changed from www/apache22 to www/apache24,
pre-build apache modules and web applications will also reflect this!
In case ports are build by yourself and apache22 is required
use the following command to keep apache22 as default.
# echo "DEFAULT_VERSIONS+=apache=2.2" >> /etc/make.conf
20140710:
AFFECTS: users of lang/rust
AUTHOR: robak@FreeBSD.org
The lang/rust port was updated to 0.11 and is now only working on FreeBSD
versions 10 and 11 -- the 9.x support has been removed by upstream.
20140709:
AFFECTS: users of security/pam-pgsql
AUTHOR: tijl@FreeBSD.org
The pam_pgsql.so module is now installed in PREFIX/lib (/usr/local/lib)
instead of /usr/lib.
20140627:
AFFECTS: users of Java
AUTHOR: swills@FreeBSD.org
The default version of OpenJDK has been updated from 1.6 to 1.7. To update,
users of Java will need to rebuild all ports that depend on Java:
If you use pkg (regardless of if you build ports from source or install
binary packages):
# pkg set -o java/openjdk6:java/openjdk7
If you use portmaster to build ports from source:
# portmaster -o java/openjdk7 openjdk6
# portmaster -R -r openjdk
If you use portupgrade to build ports from source:
# portupgrade -fo java/openjdk7 java/openjdk6
If you use pkg to install prebuilt binary packages:
# pkg install -fR java/openjdk7
If you wish to keep the 1.6 version as default, add the following lines to
your /etc/make.conf file:
#
# Keep OpenJDK 1.6 as default version.
#
JAVA_PREFERRED_PORTS=JAVA_PORT_NATIVE_OPENJDK_JDK_1_6
20140627:
AFFECTS: users of security/amavisd-milter
AUTHOR: delphij@FreeBSD.org
The default working directory of security/amavisd-milter have been
changed to /var/run/amavis/. Users will have to adjust path to the
milter socket.
20140627:
AFFECTS: users of editors/emacs21 and editors/emacs22
AUTHOR: ashish@FreeBSD.org
editors/emacs21, and editors/emacs22 are removed as they were
unmaintained upstream for a while. Their dependent ports are removed
as well. Please switch to editors/emacs (Emacs 24 release), or
editors/emacs23 (Emacs 23 release), or editors/emacs-devel (Emacs
development branch) ports.
20140626:
AFFECTS: users of mail/qmail-spamcontrol
AUTHOR: bdrewery@FreeBSD.org
Spamcontrol has been updated to the 2.7 release.
It is advised to read the release notes as some features were removed and
others reworked.
http://www.fehcom.de/qmail/spamcontrol/RELEASE_27.spamcontrol
2.7 manual: http://www.fehcom.de/qmail/spamcontrol/README_spamcontrol.html
20140626:
AFFECTS: users of comms/smstools3
AUTHOR: madpilot@FreeBSD.org
The smstools3 startup screen has been modified to allow smsd to
change uid/gid by itself. The rc options smsd_logfile, smsd_user
and smsd_group are not supported anymore, user, group and log
filename should be specified in the configuration file.
The sample configuration file has been updated to have defaults
equivalent to the old ones.
20140624:
AFFECTS: users of databases/p5-Bucardo
AUTHOR: mat@FreeBSD.org
The bucardo_ctl script has been renamed to bucardo, so, to follow the naming,
the bucardo_ctl_enable rc variable has been renamed to bucardo_enable.
20140622:
AFFECTS: users of security/gpgme
AUTHOR: jhale@FreeBSD.org
If you have both security/gnupg AND security/gnupg1 installed, gpgme will
now automatically detect and use security/gnupg. Specifically, it will
search for gpgconf(1) first and use the paths for the binaries provided
by it. Failing that, it will search for a binary named "gpg".
It is no longer possible to specify the location of the gpg binary at
buildtime to differentiate between version 1.x and version 2.x. The port
options GNUPG1 and GNUPG2 now merely add their respective versions of gnupg
as build and runtime dependencies.
20140618:
AFFECTS: users of devel/m17n-* textproc/*m17n*
AUTHOR: Nikola Lecic <nikola.lecic@anthesphoria.net>
devel/m17n-db now incorporates a set of user-contributed input methods and
a conversion script, formerly available through textproc/m17n-contrib.
Delete textproc/m17n-contrib first and then update/install devel/m17n-db.
20140616:
AFFECTS: users of devel/subversion
AUTHOR: lev@FreeBSD.org
The subversion port has been overhauled. Some optional parts were extracted
into separate ports. These ports are:
www/mod_dav_svn
instead of option MOD_DAV_SVN.
security/subversion-gnome-keyring
instead of option GNOME_KEYRING.
security/subversion-kwallet
instead of option KDE_KWALLET.
If you used devel/subversion with one (or more) of these non-standard
options, you should install the appropriate port(s) after upgrading
subversion.
"mod_dontdothat" is installed unconditionally by www/mod_dav_svn port (it
depended on the TOOLS option before), but is not activated by default, you
may need to edit apache's configuration file.
The devel/subversion port now installs svndiff, svndiff3 and svndiff4
commands if TOOLS option is enabled. They was skipped before.
The official names "diff", "diff3" and "diff4" are prefixed with "svn" to
avoid conflicts with base and other diff versions.
All libraries and binaries are now stripped if the MAINTAINER_DEBUG
option is not selected (including all sub-ports, like bindings
and mod_dav_svn).
20140611:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to 53.1. Please rebuild all ports that depend on it
If you use portmaster:
portmaster -w -r icu
If you use portupgrade:
portupgrade -fr devel/icu
20140610:
AFFECTS: users of www/firefox, www/seamonkey, mail/thunderbird, www/libxul
AUTHOR: gecko@FreeBSD.org
Gecko ports were switched to use more system libraries. Some of them
must be built with certain options unset (default). `audio/soundtouch'
has to be installed with INTEGER_SAMPLES option disabled.
20140604:
AFFECTS: users of dns/dnscrypt-proxy
AUTHOR: feld@FreeBSD.org
The 1.4.0 update to dns/dnscrypt-proxy introduced a privilege
separation capability utilizing the new _dnscrypt-proxy user.
The home directory for this user was misconfigured as /nonexistent.
The dnscrypt-proxy server will try to chroot to _dnscrypt-proxy's home
directory and fail to start. If you are affected you will need to
change _dnscrypt-proxy's home directory to /var/empty:
# pw usermod _dnscrypt-proxy -d /var/empty
20140603:
AFFECTS: users of net-p2p/zetacoin
AUTHOR: daniel@morante.net
The zetacoind process now runs as the zetacoin user. Please make sure that
this user has appropriate permissions to the blockchain database and wallet
directory.
If you are using the default path, run:
# chown -R zetacoin:zetacoin /var/db/zetacoin
# chown -R zetacoin:zetacoin /.zetacoin
20140529:
AFFECTS: users of databases/postgresql??-(server|client)
AUTHOR: mat@FreeBSD.org
PostgreSQL version 9.2 is now the default. To upgrade from a version
lower than 9.2, follow the instructions on the PostgreSQL.org website.
http://www.postgresql.org/docs/9.2/interactive/upgrading.html
When using binary packages, if you only use the client port, you can issue
the following command to follow the default version:
# pkg set -o databases/postgresql90-client:databases/postgresql92-client
20140528:
AFFECTS: users of security/calife & security/calife-devel
AUTHOR: roberto@FreeBSD.org
Calife 2.8.x is now officially EoL. Replace it with 3.0 (formerly
calife-devel).
For port builds system please follow the following instructions:
Please delete old version:
# pkg delete -f security/calife-devel
or
# pkg_delete security/calife-devel
and install security/calife.
Change origin if you had the old one:
# pkg set -o security/calife-devel:security/calife
20140527:
AFFECTS: users of databases/db6
AUTHOR: mandree@FreeBSD.org
Oracle BerkeleyDB 6.0 was upgraded to version 6.0.30. Databases that
use BLOBs need to be upgraded using db_upgrade-6.0 before they can be
accessed again. See the manual for details:
<http://docs.oracle.com/cd/E17076_03/html/api_reference/C/db_upgrade.html>
Databases that do not use BLOBs are unaffected.
20140526:
AFFECTS: users of lang/lua
lang/lua has been replaced by lang/lua51.
For port builds system please follow the following instructions:
# portmaster -o lang/lua51 lang/lua
or
# portupgrade -fo lang/lua51 lang/lua
or
# pkg set -o lang/lua:lang/lua51
20140525:
AFFECTS: users of devel/py-gobject3 and devel/py-dbus
AUTHOR: gnome@FreeBSD.org
py-gobject3 and py-dbus where split up in a common port (*-common),
python2 port (py-*) and python3 port (py3-*) port.
For port builds systems please follow the next following instructions:
Please delete the existing version to avoid conflicts.
# pkg delete -f py27-gobject3 py27-dbus
or
# pkg_delete devel/py-gobject3 devel/py-dbus
followed by:
# portmaster devel/py-gobject3 devel/py-dbus
or
# portinstall devel/py-gobject3 devel/py-dbus
20140521:
AFFECTS: users of databases/mariadb55*
AUTHOR: grembo@FreeBSD.org
The mariadb55-client and mariadb55-server port have been changed to
respect hier(7) and behave like the mysql ports. Therefore mysql-server
and mysql monitor will refuse to start if my.cnf exists in /etc or
/etc/mysql.
In case you're affected, please move /etc/my.cnf to /usr/local/etc and/or
/etc/mysql/my.cnf to /usr/local/etc/mysql.
20140520:
AFFECTS: users of security/dropbear
AUTHOR: ak@FreeBSD.org
security/dropbear port separator syntax was changed (again), now using
host^port instead of host%port.
You may need to update your config files while updating to 2014.63 from
the previous versions.
20140511:
AFFECTS: users of databases/firebird*
AUTHOR: bapt@FreeBSD.org
The default version of databases/firebird* have been changed to support
DEFAULT_VERSIONS variable
DEFAULT_VERSIONS=firebird=2.5
20140507:
AFFECTS: users of lang/open-cobol
AUTHOR: johans@FreeBSD.org
lang/open-cobol was moved to lang/gnu-cobol to match the new package
name. Please do the following according to package manager used.
# portmaster -o lang/gnu-cobol lang/open-cobol
or
# portupgrade -fo lang/gnu-cobol lang/open-cobol
or
# pkg set -o lang/open-cobol:lang/gnu-cobol
20140506:
AFFECTS: users of ports-mgmt/portshaker
AUTHOR: romain@FreeBSD.org
ports-mgmt/portshaker was updated to avoid creating an aditional 'ports'
subdirectory when merging to a poudriere_tree without ZFS, so that
portshaker's default location matches poudriere's default location.
Users of poudriere on non-ZFS systems should not anymore have to pass extra
options to poudriere for it to find the ports tree.
20140506:
AFFECTS: users of security/yassl
AUTHOR: gahr@FreeBSD.org
security/yassl was moved to security/cyassl to match the original package
name. Please do the following according to package manager used.
# portmaster -o security/cyassl security/yassl
or
# portupgrade -fo security/cyassl security/yassl
or
# pkg set -o security/yassl:security/cyassl
20140505:
AFFECTS: users of databases/libiodbc
AUTHOR: bapt@FreeBSD.org
libiodbc no longer provide the odbc compatibility
Rebuild all ports that are linked to libiodbc
# portmaster -r libiodbc
or
# portupgrade -r databases/libiodbc
20140503:
AFFECTS: users of science/hdf5* and science/netcdf*
AUTHOR: sunpoet@FreeBSD.org
There are major version changes in HDF5 and NetCDF ports:
- science/hdf5: updated from 1.6.9 to 1.8.12
- science/hdf5-18: replaced by science/hdf5
- science/netcdf: updated from 3.6.3 to 4.3.2
C++/Fortran binding moved into new ports (by upstream)
- science/netcdf-cxx: new port for C++ binding of NetCDF
- science/netcdf-fortran: new port for Fortran binding of NetCDF
- science/netcdf-ftn: replaced by science/netcdf-fortran
- science/netcdf3-ftn: replaced by science/netcdf-fortran
- science/netcdf4: replaced by science/netcdf
Please deinstall them before building the new versions.
20140428:
AFFECTS: users of java/openjdk7
AUTHOR: glewis@FreeBSD.org
The previous version of openjdk7 had a bug that will prevent it from
being able to bootstrap itself. Please deinstall openjdk7 before
building the new version.
20140427:
AFFECTS: users of graphics/gdal
AUTHOR: sunpoet@FreeBSD.org
Due to changes in header files, please deinstall gdal first while updating
from 1.9.x/1.10.x to 1.11.x.
20140420:
AFFECTS: users of net/samba4
AUTHOR: timur@FreeBSD.org
Samba4 port now re-uses the same logic and startup script as Samba41. So,
to get net/samba4 runing you need to rename samba4_enable in /etc/rc.conf
to the samba_sever_enable.
samba_server_enable="YES"
Startup script tries it's best to guess which out of samba/nmbd/smbd/winbindd
daemons have to be started, but you can fine tune this by specifying them in
rc.conf, just make sure that samba_server_enable is enabled(see entry for 20121022).
20140416:
AFFECTS: users of x11/xorg graphics/dri graphics/libGL and related ports
AUTHOR: x11@FreeBSD.org
The default xorg version has been switched on FreeBSD 10-STABLE and
FreeBSD 9-STABLE.
To upgrade graphics/libGL, graphics/dri and related MESA ports, it is
necessary to first remove the old versions of those ports.
No special upgrade procedure is needed for xorg ports but it is
necessary to recompile all xorg drivers (xf86-*) and other ports that
depend on the xserver version, including
emulators/virtualbox-ose-additions. Portrevisions have been bumped
where needed, but users of drivers not in the ports tree will need to
recompile those.
If it is important to stay on the old versions, it is possible to
specify WITHOUT_NEW_XORG= in /etc/make.conf to get the old xorg
distribution.
For users in need of working console when using KMS drivers (intel and
radeon graphics cards) please use the new vt(9) console driver.
For more information, see https://wiki.freebsd.org/Graphics and
https://wiki.freebsd.org/Newcons .
To update:
# pkg_delete -f libGL-\* dri-\*
or
# pkg delete -f libGL dri
followed by
# portmaster graphics/dri graphics/libGL
or
# portupgrade graphics/dri graphics/libGL
and then
# portmaster -a
or
# portupgrade -a
20140416:
AFFECTS: users of print/freetype2 textproc/libxml2 x11/pixman
x11/libxcb and graphics/freeglut
AUTHOR: x11@FreeBSD.org and gnome@FreeBSD.org
The library version of the above libraries has been brought in line
with what upstream expects. To do this all users of these ports need
to be rebuilt. Portrevisions have been bumped as a consequence.
# portmaster -r freetype2 -r libxml2 -r pixman -r freeglut -r libxcb
or
# portupgrade -rf freetype2 libxml2 pixman freeglut libxcb
20140415:
AFFECTS: users of mod_python3
AUTHOR: ohauer@FreeBSD.org
www/mod_python3 was renamed to www/mod_python33, additional www/mod_python35
with support for apache24 was added to the portstree.
To reflect the new port location use:
pkgng users:
# pkg set -o www/mod_python3:www/mod_python33
portmaster users:
# portmaster -o www/mod_python33 www/mod_python3
portupgrade users:
# portupgrade -o www/mod_python33 www/mod_python3
20140414:
AFFECTS: users of dmd 1.X and dmd 2.x.
AUTHOR: cy@FreeBSD.org
lang/dmd and lang/dmd2 have switched places. Dmd 1.x is no longer supported
by digitalmars.com and is now the secondary dmd port in the collection.
Dmd2 is the primary port. What this means to dmd users is that dmd1 is now
used to invoke dmd 1.x and the dmd command (instead of dmd2) now invokes
dmd 2.x.
20140413:
AFFECTS: users of Python and pkg >= 1.2.7_1
AUTHOR: koobs@FreeBSD.org
There have been reports of the following error when upgrading Python ports:
pkg-static: Plist error, directory listed as a file: <name>.egg-info
The cause is an outdated or unpatched version of setuptools or distribute
installed by the user, or leftover from previous upgrades being used during
the `setup.py install` phase. pkg >= 1.2.7_1 now generates an error where
previously it did not.
Users should inspect their ${LOCALBASE}/lib/pythonX.Y/site-packages
directory, and remove any entries that reference versions of
setuptools or distribute *not* provided by ports or packages.
Examples of entries that may be removed are:
1) distribute-0.6.35-py2.7.egg
2) setuptools-0.6c11-py2.7.egg
3) *Any* version of setuptools directly from PyPI via pip or easy_install
More information is available here:
http://lists.freebsd.org/pipermail/freebsd-ports/2014-April/091618.html
20140410:
AFFECTS: users of mail/vpopmail
AUTHOR: bdrewery@FreeBSD.org
If you are storing limits in MySQL, the following schema changes must be made:
ALTER TABLE `limits` ADD `disable_maildrop` TINYINT(1) DEFAULT '0' NOT NULL AFTER `disable_spamassassin`;
ALTER TABLE `limits` MODIFY `diskquota` BIGINT UNSIGNED NOT NULL DEFAULT 0;
ALTER TABLE `limits` MODIFY `maxmsgcount` BIGINT UNSIGNED NOT NULL DEFAULT 0;
ALTER TABLE `limits` MODIFY `defaultquota` BIGINT UNSIGNED NOT NULL DEFAULT 0;
ALTER TABLE `limits` MODIFY `defaultmaxmsgcount` BIGINT UNSIGNED NOT NULL DEFAULT 0;
20140403:
AFFECTS: users of net/rabbitmq
AUTHOR: olgeni@FreeBSD.org
This release changes the behaviour of the default "guest" user.
Previously the guest user could be accessed from any network
location. In RabbitMQ 3.3.0 and later, the guest user can only
be accessed via localhost by default.
Any other users you create will not (by default) be restricted
in this way.
See http://www.rabbitmq.com/access-control.html for more information.
20140403:
AFFECTS: users of net/kdnssd
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.12.4. kdnssd package has been renamed
to match upstream naming. pkgng users need to update package origin
manually:
# pkg set -o net/kdnssd:net/zeroconf-ioslave
20140402:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
Elasticsearch has been updated to version 1.1.0. If you are updating
from a version prior to 1.0.0 you will need to do a full cluster
shutdown for this update as it cannot be performed in a rolling
fashion.
20140401:
AFFECTS: users of security/gnutls3
AUTHOR: bdrewery@FreeBSD.org
Libdane support is no longer enabled by default. Rebuild the port with
the LIBDANE option if danetool is desired.
20140331:
AFFECTS: users of print/cups-client and print/cups-image
AUTHOR: bsam@FreeBSD.org
CUPS ports have been updated to version 1.7.1. A file has migrated from
cups-image port to cups-client. Before upgrading you should force the
removal of cups-image port, otherwise it will conflict with the new one.
pkg users:
# pkg delete -f cups-image\*
other users:
# pkg_delete -f cups-image\*
2. Install/upgrade other cups* packages.
If cups-filters complains about a missing cups/raster.h include,
try reinstalling the cups-client package.
20140327:
AFFECTS: users of lang/php5 and lang/php55 with Apache module
AUTHOR: ale@FreeBSD.org
The Apache PHP module has been separated from the main PHP port.
If you had the APACHE OPTION selected, you have to perform the
following steps:
1) update your lang/php* options (i.e. 'make config')
2) rebuild lang/php* port
3) install www/mod_php* port
It is *mandatory* to build both ports with the same DEBUG and ZTS
options, so if you have a threaded Apache (i.e. worker or event MPM)
you have to select the ZTS option in lang/php* port.
20140322:
AFFECTS: users of devel/apr1
AUTHOR: ohauer@FreeBSD.org
APR was updated to 1.5.0, BDB requirement was bumped to 48+
It is necessary to first remove the old version of devel/apr1.
Please rebuild all ports which are using functions from APR/APR-util
such as Apache, Subversion, etc.
# portmaster -r apr
or
# portupgrade -r devel/apr1
20140318:
AFFECTS: users of net/openldap24-server
AUTHOR: delphij@FreeBSD.org
Please note that Berkeley DB backend is now deprecated and will be removed
in a future version. Existing users should migrate data to the new MDB
backend when possible.
20140317:
AFFECTS: users of misc/ossp-uuid-perl
AUTHOR: culot@FreeBSD.org
misc/ossp-uuid-perl was replaced by misc/p5-OSSP-uuid. Please do the
following according to package manager used.
# portmaster -o misc/p5-OSSP-uuid misc/ossp-uuid-perl
or
# portupgrade -fo misc/p5-OSSP-uuid misc/ossp-uuid-perl
or
# pkg set -o misc/p5-OSSP-uuid:misc/ossp-uuid-perl
20140312:
AFFECTS: users of net/openistgt
AUTHOR: jpaetzel@FreeBSD.org
Between istgt supporting target reload, and iscsid using CTL there is no
point to this port. As such it has been deleted without warning, since
the support for it is as best questionable.
pkgng users:
# pkg set -o net/openistgt:net/istgt
portmaster users:
# portmaster -o net/istgt net/openistgt
# portmaster -r istgt
portupgrade users:
# portupgrade -o net/istgt -f net/openistgt
# portupgrade -fr net/istgt
20140310:
AFFECTS: users of mail/p5-Mail-SpamAssassin and japanese/p5-Mail-SpamAssassin
AUTHOR: ohauer@FreeBSD.org
The port mail/p5-Mail-SpamAssassin was renamed to mail/spamassassin and
the port japanese/p5-Mail-SpamAssassin was renamed to japanese/spamassassin.
To ease upgrading run the following set of commands:
pkgng users:
# pkg set -o mail/p5-Mail-SpamAssassin:mail/spamassassin
# pkg set -o japanese/p5-Mail-SpamAssassin:japanese/spamassassin
portmaster users:
# portmaster -o mail/spamassassin mail/p5-Mail-SpamAssassin
# portmaster -o japanese/spamassassin japanese/p5-Mail-SpamAssassin
20140307:
AFFECTS: users of devel/py-setuptools dependent ports
AUTHOR: sunpoet@FreeBSD.org
devel/py-setuptools is being used for every python ports (if USE_PYDISTUTILS
defined) since r336553. Due to PKGORIGIN limitation, we cannot build one
python port with python27 and the other with python33 since they require
different setuptools versions which have same PKGORIGIN. With the addition
of py-setuptools{27,32,33}, we could now have py27-foo and py33-bar coexist
in one system.
Note that this is only a short-term solution. It does not help if you need
coexistence of one port with different python versions, e.g. py27-foo and
py33-foo.
Please rebuild all ports that depend on devel/py-setuptools and use
devel/py-setuptools{27,32,33} instead.
XX represents python version (27, 32 or 33) in the following steps.
pkgng users:
# pkg set -o devel/py-setuptools:devel/py-setuptoolsXX
portmaster users:
# portmaster -o devel/py-setuptoolsXX devel/py-setuptools
# portmaster -r py\*setuptools
portupgrade users:
# portupgrade -o devel/py-setuptoolsXX -f devel/py-setuptools
# portupgrade -fr devel/py-setuptools
20140304:
AFFECTS: users of security/kwallet
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.12.3. kwallet package has been renamed
to match upstream naming. pkgng users need to update package origin
manually:
# pkg set -o security/kwallet:security/kwalletmanager
20140302:
AFFECTS: users of sysutils/ansible
AUTHOR: rm@FreeBSD.org
This is an major update and changes were introduced in ansible 1.5, that
are not backward compatible. Please refer changelog there before update:
https://raw.github.com/ansible/ansible/v1.5.0/CHANGELOG.md
20140223:
AFFECTS: users of net-mgmt/mk-livestatus
AUTHOR: ohauer@FreeBSD.org
livecheck was removed in 1.2.3.i5. It never was really stable, Nagios4
has something similar built in.
Please remove the "livecheck=..." directive from etc/nagios/nagios.cfg.
20140222:
AFFECTS: users of mail/courier-imap
AUTHOR: oliver@FreeBSD.org
When using SSL and updating from an older version, run mkdhparams(8) to
create the new TLS_DHPARAMS file which is needed for Courier IMAP 4.15
and up.
20140222:
AFFECTS: users of net-im/turpial
AUTHOR: olivierd@FreeBSD.org
Turpial has been updated to 3.0, due to changes in net-im/turpial port it
will be necessary to remove it before updating.
20140220:
AFFECTS: users of editors/vim
AUTHOR: sunpoet@FreeBSD.org
The editors/vim port has been reworked to simplify option handling. In UI
option group, a new option (CONSOLE) was added for users who do not need
GUI support. This option is off by default. You might encounter install
or package failures with "old" option setting. Please run "make config" to
modify your setting.
20140219:
AFFECTS: users of textproc/docbook*
AUTHOR: mat@FreeBSD.org
The textproc/docbook-* ports have been consolidated into two ports
textproc/docbook-sgml and textproc/docbook-xml.
Before upgrading you should force the removal of the existing ports, they
will conflict with the new ones.
pkg users can run:
pkg delete -f docbook-xml\* docbook-sk\* docbook\[2345\]\?\?-\* docbook-4\*
the other users can run:
pkg_delete -f docbook-xml\* docbook-sk\* docbook\[2345\]\?\?-\* docbook-4\*
20140218:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.12.2. kdeadmin, kdenetwork, kdesdk,
and kdetoys ports have been split due to upstream changes.
KDE Workspace port has been updated to 4.11.6. It requires modern
Mesa libraries, provided by WITH_NEW_XORG knob. To update Xorg ports
to newer version follow instructions at https://wiki.freebsd.org/Graphics
20140218:
AFFECTS: users of misc/kdehier4
AUTHOR: kde@FreeBSD.org
KDE4_PREFIX has been changed from /usr/local/kde4 to /usr/local.
All ports that depends on kdehier4 must be reinstalled.
PORTREVISION for affected ports has been increased, upgrading tools
(portmaster, pkg) should handle this update without manual intervention.
Please check /usr/local/kde4 for leftovers after upgrade. If you don't
have locally modified files, e.g. under /usr/local/kde4/etc, you may
safely remove /usr/local/kde4.
20140214:
AFFECTS: users of lang/perl5.12
AUTHOR: mat@FreeBSD.org
Perl 5.12 has been removed. The default Perl is lang/perl5.16.
pkg(8) users:
1) Update the origin to point to 5.16:
pkg set -o lang/perl5.12:lang/perl5.16
2) Upgrade perl and all dependencies:
pkg install -Rf lang/perl5.16
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.16):
portupgrade -o lang/perl5.16 -f lang/perl5.12
2) Reinstall everything that depends on Perl:
portupgrade -fr lang/perl5.16
Portmaster users:
portmaster -o lang/perl5.16 lang/perl5.12
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port specify the name of
the Perl directory in /var/db/pkg explicitly. Also, depending on when
perl 5.12 was installed last, the prefix may be perl-, perl5- or
perl5.12-.
20140211:
AFFECTS: users of lang/php* databases/postgresql* databases/mysql* www/apache*
AUTHOR: mat@FreeBSD.org
The default versions of lang/php*, databases/postgresql*,
databases/mysql* and www/apache* have been changed to support the
new DEFAULT_VERSIONS variable.
DEFAULT_APACHE_VER, DEFAULT_MYSQL_VER, DEFAULT_PGSQL_VER,
DEFAULT_FPC_VER and DEFAULT_PHP_VER are now deprecated. You can use
the new DEFAULT_VERSIONS variable like this:
DEFAULT_VERSIONS=php=5.5 mysql=5.6 apache=2.4
20140208:
AFFECTS: users of spamdyke
AUTHOR: bdrewery@FreeBSD.org
Spamdyke has been updated to 5.0.0. The behavior has changed from
4.x. Please see the upgrading notes at:
http://www.spamdyke.org/documentation/UPGRADING_version_4_to_version_5.txt
20140208:
AFFECTS: users of icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to 52.1. Please rebuild all ports that depend on it
if you have the glib20 port built with COLLATION_FIX option activated
If you use portmaster:
portmaster -w -r icu
If you use portupgrade:
portupgrade -fr devel/icu
If you use pkgng with binary packages:
pkg install -fR devel/icu
20140201:
AFFECTS: users of net-mgmt/zabbix*
AUTHOR: koobs@FreeBSD.org
The login shell for the zabbix user in UIDs was changed from
/usr/sbin/nologin to /bin/sh to fix the zabbix-agent UserParameter
feature.
To update the existing user on your system, run:
# pw usermod zabbix -s /bin/sh
20140114:
AFFECTS: users of www/mod_authnz_external
AUTHOR: ohauer@FreeBSD.org
www/mod_authnz_external was moved to www/mod_authnz_external22
Please do the following according to package manager used.
# portmaster -o www/mod_authnz_external22 www/mod_authnz_external
or
# portupgrade -fo www/mod_authnz_external22 www/mod_authnz_external
or
# pkg set -o www/mod_authnz_external:www/mod_authnz_external22
20140113:
AFFECTS: users of net/samba41
AUTHOR: timur@FreeBSD.org
With the introduction of Samba 4.1 corresponding port lost SWAT support
and made WINBIND support mandatory. As samba4 introduced additional 'samba'
daemon to the tripplet of nmbd/smbd/winbindd to avoid confusion startup
script for samba41 was renamed to 'samba_server'. To start the whole band
up it's enough to add to the rc.conf:
samba_server_enable="YES"
Startup script tries it's best to guess which out of samba/nmbd/smbd/winbindd
daemons have to be started, but you can fine tune this by specifying them in
rc.conf, just make sure that samba_server_enable is enabled(see entry for 20121022).
20140112:
AFFECTS: users of devel/libical
AUTHOR: kwm@FreeBSD.org
The libical port was updated to 1.0.0. Due to the shared library bump
and the removal of the .la file, all ports that use libical need to be
rebuilt.
# portmaster -r libical
or
# portupgrade -fr libical
or
# pkg install -fR libical
20140111:
AFFECTS: users of lang/go
AUTHOR: jlaffaye@FreeBSD.org
Third party Go packages installed via the ports tree are no longer installed
in GOROOT (PREFIX/go) but in a specific path: PREFIX/share/go
Affected ports had their PORTREVISION bumped.
To reinstall these packages via the ports tree, it is needed to deinstall
them first (the build will fail if the `go` command detects that they
already exists in GOROOT).
If you are using these third party Go packages for local Go development,
you have to add this new path to your GOPATH environment variable.
20140107:
AFFECTS: users of Qt 4 ports
AUTHOR: makc@FreeBSD.org
Qt 4 ports framework has been reworked, several ports have been renamed.
To ease upgrading run the following set of commands:
# pkg set -o devel/qt4-declarative:x11-toolkits/qt4-declarative
# pkg set -o devel/qt4-qtestlib:devel/qt4-testlib
# pkg set -o textproc/qt4-clucene:textproc/clucene-qt4
# pkg set -o www/qt4-webkit:www/webkit-qt4
# pkg set -o x11/qt4-opengl:graphics/qt4-opengl
20140102:
AFFECTS: users of archivers/p7zip
AUTHOR: rakuco@FreeBSD.org
The MINIMAL and MODULES options have been removed from archivers/p7zip,
which now unconditionally installs the 7z, 7za and 7zr, as if the MINIMAL
option was previously unset.
The RAR decompression codec, whose source code has a more restrictive
license that forbids its use for creating RAR archives, has been moved to
a separate port, archivers/p7zip-codec-rar.
20131230:
AFFECTS: ports using Apache Software License 2.0
AUTHOR: ohauer@FreeBSD.org
The acronym for Apache Software License 2.0 was renamed to APACHE20
20131226:
AFFECTS: users of security/cyrus-sasl2
AUTHOR: ume@FreeBSD.org
The SASL GSSAPI authentication plugin was removed from
security/cyrus-sasl2 port and divided into new
security/cyrus-sasl2-gssapi port.
If you are using the SASL GSSAPI authentication, please install
security/cyrus-sasl2-gssapi port, in addition to upgrading
security/cyrus-sasl2 port.
20131218:
AFFECTS: users of news/cnews
AUTHOR: dinoex@FreeBSD.org
The default path for overview files has changed.
Rebuild your overview files after the update with:
su - news /usr/local/libexec/cnews/nov/initov
20131217:
AFFECTS: users of databases/ruby-bdb or ports-mgmt/portupgrade and databases/db5 or databases/db6
AUTHOR: mandree@FreeBSD.org
databases/db5 and databases/db6 have recently been updated to fix
bugs. This changed their patchlevel version.
However, ruby-bdb used to break during the db[56] upgrade due to a bug
described in <http://www.freebsd.org/cgi/query-pr.cgi?pr=184921>.
THEREFORE, YOU MUST MANUALLY UPGRADE databases/ruby-bdb INDIVIDUALLY
TO 0.6.6_2 OR NEWER WHEN USING portupgrade AGAINST databases/db[56]
PORTS. To achieve that, type:
# portupgrade databases/ruby-bdb
or
# portmaster -x 'db*' databases/ruby-bdb
before proceeding with other upgrades.
Should you have corrupted the portupgrade databases, or if ruby-bdb
refuses to work with the upgraded db* port with errors such as "DB
needs compatible versions of libdb & db.h", then rebuild the ruby-bdb
port manually, and fix the portupgrade databases:
# make -C /usr/ports/databases/ruby-bdb all deinstall install clean
# pkgdb -fu
# portupgrade -f db5 db6
This should return portupgrade to normal operation.
20131216:
AFFECTS: users of x11/xorg, graphics/libGL, graphics/dri, all xorg ports
AUTHOR: zeising@FreeBSD.org
The default xorg version has been switched on FreeBSD CURRENT.
To upgrade graphics/libGL, graphics/dri and related MESA ports, it is
necessary to first remove the old versions of those ports.
No special upgrade procedure is needed for xorg port but it is
necessary to recompile all xorg drivers (xf86-*) and other ports that
depend on the xserver version, including
emulators/virtualbox-ose-additions. Portrevisions have been bumped
where needed, but users of drivers not in the ports tree will need to
recompile those.
If it is important to stay on the old versions, it is possible to
specify WITHOUT_NEW_XORG= in /etc/make.conf to get the old xorg
distribution.
To update:
# pkg_delete -f libGL-\* dri-\*
or
# pkg delete -f libGL dri
followed by
# portmaster graphics/dri graphics/libGL
or
# portupgrade graphics/dri graphics/libGL
and then
# portmaster -a
or
# portupgrade -a
20131216:
AFFECTS: users of databases/db4*
AUTHOR: mandree@FreeBSD.org
Berkeley DB versions before and excluding 4.8 have been marked deprecated.
New port installations should be based on Berkeley DB 5 or 6.
Note that Oracle Berkeley DB 6 is under the more restrictive Affero GPL v3
license, be sure to review if using that fits your requirements.
You can add WITH_BDB_VER=5 or WITH_BDB_VER=6 to /etc/make.conf to have all
applications that get rebuilt use Oracle Berkeley DB 5 or 6, respectively.
DO NOT FORCE DELETE older BerkeleyDB packages, that breaks the upgrade
tools. Instead, first rebuild the ports that depend on it, then
remove the old Berkeley DB versions.
Berkeley DB ports should be able to build/install with an older and a
newer version version both installed if WITH_BDB_VER is set. If a
port then grabs the old Berkeley DB version, that is an issue with the
port that requires Berkeley DB, and should be reported to the
maintainer.
If you are interested in upgrading now already, we have instructions
at <https://wiki.freebsd.org/Ports/BerkeleyDBCleanup>.
20131209:
AFFECTS: users of dns/bind96, dns/bind98 and bind99 on FreeBSD 10.0
AUTHOR: erwin@FreeBSD.org
Bind versions before 9.6.3.2.ESV.R10_2, 9.8.6_2, and 9.9.4_2 on
FreeBSD 10.0 will replace named.conf on upgrade. Make sure to
backup any local changes before upgrading to the _2 versions.
20131208:
AFFECTS: users of java/subversion-java
AUTHOR: ohauer@FreeBSD.org
java/subversion-java was moved to java/java-subversion.
Please do the following according to package manager used.
# portmaster -o java/java-subversion java/subversion-java
or
# portupgrade -fo java/java-subversion java/subversion-java
or
# pkg set -o java/subversion-java:java/java-subversion
20131208:
AFFECTS: users of x11-toolkits/vte
AUTHOR: kwm@FreeBSD.org
The gnome-pty-helper program has been split off from the vte package
to allow both vte and vte3 to be installed at the same time. To update
after this change please do the following:
# pkg_delete -f vte\*
or
# pkg delete -fg vte\*
followed by
# portmaster x11-toolkits/vte
or
# portupgrade x11-toolkits/vte
20131207:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
There has been changes to the OpenSMTPD configuration. Please refer to
smtpd.conf(5), and use "smtpd -nf smtpd.conf" to validate.
20131203:
AFFECTS: users of graphics/opencv, graphics/opencv-core
AUTHOR: jhale@FreeBSD.org
OpenCV has been updated to 2.4.7. Due to movement of files between the
opencv port and the opencv-core port, it will be necessary to remove
both packages before updating.
# pkg_delete -f opencv\*
or
# pkg delete -fg opencv\*
followed by
# portmaster -a
or
# portupgrade -a
20131127:
AFFECTS: users of devel/py-distribute (i.e you)
AUTHOR: wg@FreeBSD.org
devel/py-distribute was replaced with devel/py-setuptools. Please do
the following according to package manager used. py-distribute port
will be removed shortly.
# portmaster -o devel/py-setuptools devel/py-distribute
or
# portupgrade -fo devel/py-setuptools devel/py-distribute
or
# pkg set -o devel/py-distribute:devel/py-setuptools
# pkg install -f devel/py-setuptools
20131125:
AFFECTS: users of www/mod_wsgi
AUTHOR: ohauer@FreeBSD.org
The port www/mod_wsgi moved to www/mod_wsgi2 to reflect the port version.
# portmaster -o www/mod_wsgi2 www/mod_wsgi
or
# portupgrade -fo www/mod_wsgi2 www/mod_wsgi
or
# pkg set -o www/mod_wsgi:www/mod_wsgi2
20131120:
AFFECTS: users of lang/perl5.12 lang/perl5.14 lang/perl5.16 and lang/perl5.18
AUTHOR: mat@FreeBSD.org
The THREADS option has been enabled by default in all Perl. If you're using
binary packages you need to do :
# pkg install -Rf perl5
If you're not using binary packages, and want to switch from non threaded
Perl to threaded Perl, you need to recompile and reinstall most ports
depending on Perl. Supposing you have Perl 5.16, you would do:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Change the option in lang/perl5.16:
make -C /usr/ports/lang/perl5.16 config
2) Reinstall everything that depends on Perl:
portupgrade -fr lang/perl5.16
Portmaster users:
1) Change the option in lang/perl5.16:
make -C /usr/ports/lang/perl5.16 config
2) Reinstall everything that depends on Perl:
portmaster -r perl5-
Note: The installed Perl package was named perl and is now named perl5, if
you have not updated your installation in a long time, you may need to
use "perl-" here.
20131112:
AFFECTS: users of dns/nsd
AUTHOR: erwin@FreeBSD.org
dns/nsd was updated to the new 4.0.0 major release.
This version replaces the nsdc control program with nsd-control.
This requires some manual setup with nsd-control-setup and editing
of the config files. nsd-control is incompatible with nsdc so when
that is used in scripts, these should be adapted. More information:
http://www.nlnetlabs.nl/svn/nsd/tags/NSD_4_0_0_REL/doc/NSD-4-features
NSD version 3 is still supported in dns/nsd3. To keep the old
version:
# portmaster -o dns/nsd3 dns/nsd
or
# portupgrade -fo dns/nsd3 dns/nsd
or
# pkg set -o dns/nsd:dns/nsd3
20131112:
AFFECTS: users of dns/bind9*
AUTHOR: erwin@FreeBSD.org
All bind9 ports have been updated to support FreeBSD 10.x after
BIND was removed from the base system. It is now self-contained
in ${PREFIX}/etc/namedb, and chroot and symlinking options are
no longer supported out of the box.
For users of FreeBSD 9.x and earlier, the LINKS option is no longer
enabled by default, but still supported. No other changes should
affect those users, and updating without changing already set options
will keep the system in the same state.
20131103:
AFFECTS: users of security/libtasn1 and any port that depends on it
AUTHOR: novel@FreeBSD.org
libtasn1 has been updated to 3.3 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
libtasn1.
# portmaster -r libtasn1
or
# portupgrade -fr security/libtasn1
or
# pkg install -fR security/libtasn1
20131031:
AFFECTS: users of multimedia/rtmpdump
AUTHOR: hrs@FreeBSD.org
The library part of multimedia/rtmpdump is split into multimedia/librtmp.
multimedia/rtmpdump now depends on the library port.
A build error can occur if you built and installed old rtmpdump by
using stock OpenSSL, and then install security/openssl and try to build
multimedia/rtmpdump without deinstalling the installed one. Please
make sure if the old rtmpdump is removed before building the new version.
20131028:
AFFECTS: users of comms/dcf77pi
AUTHOR: rene@FreeBSD.org
As of version 1.0.5 the configuration file was renamed from
hardware.txt to config.txt and the format has been made more flexible.
If you have customized any parameters, be sure to copy them to
config.txt after which hardware.txt can be removed.
20131028:
AFFECTS: users of multimedia/ffmpeg1 and multimedia/ffmpeg-devel
AUTHOR: wg@FreeBSD.org
The port ffmpeg was updated, ffmpeg1 and ffmpeg-devel were removed in
favor of ffmpeg.
# portmaster -o multimedia/ffmpeg multimedia/ffmpeg1
or
# portupgrade -fo multimedia/ffmpeg multimedia/ffmpeg1
or
# pkg set -o multimedia/ffmpeg1:multimedia/ffmpeg
and
# portmaster -o multimedia/ffmpeg multimedia/ffmpeg-devel
or
# portupgrade -fo multimedia/ffmpeg multimedia/ffmpeg-devel
or
# pkg set -o multimedia/ffmpeg-devel:multimedia/ffmpeg
20131023:
AFFECTS: users of lang/perl5.12 lang/perl5.14
AUTHOR: mat@FreeBSD.org
The default Perl has been switched to lang/perl5.16. These examples
are for switching from lang/perl5.14, if you are running another
version, replace lang/perl5.14 with the origin of the Perl you have
installed.
Pkgng users:
# pkg set -o lang/perl5.14:lang/perl5.16
# pkg install -Rf lang/perl5.16
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.16):
portupgrade -o lang/perl5.16 -f lang/perl5.14
2) Reinstall everything that depends on Perl:
portupgrade -fr lang/perl5.16
Portmaster users:
portmaster -o lang/perl5.16 lang/perl5.14
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to specify
the name of the Perl directory in /var/db/pkg explicitly.
20131020:
AFFECTS: users of mail/squirrelmail
AUTHOR: adamw@adamw.org
The default location for user data files and attachments has changed.
This will only affect new installations, and upgrading SquirrelMail
WILL NOT break your current installation.
To make use of the new locations, do the following:
# cp -rp /var/spool/squirrelmail/pref/* /usr/local/www/squirrelmail/data
# cp -rp /var/spool/squirrelmail/attach/* /usr/local/www/squirrelmail/attach
and then run /usr/local/www/squirrelmail/configure and tell SM about
it ("Data Directory" and "Attachment Directory" under "General Options").
This version of SquirrelMail is a SNAPSHOT that brings in PHP 5.4 and 5.5
compatibility.
20131020:
AFFECTS: users of security/gpgme
AUTHOR: jhale@FreeBSD.org
The library version of security/gpgme has changed, and PORTREVISION has
been bumped in all dependent ports. If you have external software that
depends on gpgme, this software needs to be recompiled.
To recompile all software dependent on gpgme, run:
# portmaster -r gpgme
or
# portupgrade -rf gpgme
20131008:
AFFECTS: all users
AUTHOR: bapt@FreeBSD.org
A new USES has been added: compiler.mk, this uses allows porters to
select a compiler for a given port based on the features the port needs
By default this will always try to find Clang > 3.3.
If the user prefers using GCC then the following macro should be added
to user's make.conf: FAVORITE_COMPILER=gcc
20131004:
AFFECTS: users of net-mgmt/nrpe2
AUTHOR: ohauer@FreeBSD.org
The port nrpe2 was updated and moved to nrpe
# portmaster -o net-mgmt/nrpe net-mgmt/nrpe2
or
# portupgrade -fo net-mgmt/nrpe net-mgmt/nrpe2
or
# pkg set -o net-mgmt/nrpe2:net-mgmt/nrpe
20131003:
AFFECTS: users of lang/python* and ports
AUTHOR: mva@FreeBSD.org
The default versions of lang/python* have been changed to support the
new DEFAULT_VERSIONS variable.
PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
make.conf, you should change them something like
DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3
20130929:
AFFECTS: users of x11/pixman
AUTHOR: zeising@FreeBSD.org
The library version of x11/pixman has changed, and PORTREVISION has
been bumped in all dependent ports. If you have external software that
depends on pixman, this software needs to be recompiled.
To recompile all software dependent on pixman, run:
# portmaster -r pixman
or
# portupgrade -rf pixman
20130929:
AFFECTS: users of graphics/libGL, graphics/dri and other MESA ports
AUTHOR: zeising@FreeBSD.org
The graphics/libGL, graphics/dri and related MESA ports have been
updated to 9.1 when compiled with WITH_NEW_XORG= set. It is necessary
to remove the old versions of both ports before updating.
# pkg_delete -f libGL-\* dri-\*
or
# pkg delete -f libGL dri
followed by
# portmaster -a
20130925:
AFFECTS: users of print/qpdf
AUTHOR: d.y.kazarov@mail.ru
Due to the changes in libqpdf.so, please deinstall qpdf first if you
are updating from 4.0.0 to 4.0.1+
20130920:
AFFECTS: users of ptlib, opal and/or ekiga
AUTHOR: kwm@FreeBSD.org
The ptlib26, opal3 and ekiga3 ports where updated to the latest version
and moved to the location of the old ports. If the ekiga (2.0) port is
installed the same line as for ekiga3 can be used except without the 3 at
the end.
# portmaster -o devel/ptlib devel/ptlib26
# portmaster -o net/opal net/opal3
# portmaster -o net/ekiga3 net-im/ekiga
or
# portupgrade -fo devel/ptlib devel/ptlib26
# portupgrade -fo net/opal net/opal3
# portupgrade -fo net/ekiga3 net-im/ekiga
or
# pkg set -o devel/ptlib26 devel/ptlib
# pkg set -o net/opal3 net/opal
# pkg set -o net/ekiga3 net-im/ekiga
20130920:
AFFECTS: users of ports
AUTHOR: bapt@FreeBSD.org
New way to override the default version of a language in the ports
tree.
The make variable, DEFAULT_VERSIONS, allows users to override the
default version defined by the ports tree.
For example, to declare specific versions for Perl, Ruby and Tcl/Tk,
it would be defined as:
DEFAULT_VERSIONS= perl5=5.18 ruby=2.0 tcltk=8.6
Today, this only is supported by Perl, Ruby, and Tcl/Tk.
20130920:
AFFECTS: users of ports
AUTHOR: bdrewery@FreeBSD.org
Optional Stack Protector [1] support has been added with the WITH_SSP_PORTS
knob.
WITH_SSP_PORTS= yes
This currently is only supported on FreeBSD 10 amd64/i386 and earlier
releases on amd64.
The default SSP_CLFAGS is -fstack-protector, but -fstack-protector-all
may optionally be set instead.
To enable support, add WITH_SSP_PORTS=yes to your make.conf and rebuild all
ports.
# portmaster -af
or
# portupgrade -af
[1] https://en.wikipedia.org/wiki/Buffer_overflow_protection
20130904:
AFFECTS: 10-CURRENT users with any port depending on converters/libiconv
AUTHOR: madpilot@FreeBSD.org
10-CURRENT after r254273 (committed on August 13, 2013) has an
implementation of iconv enabled by default in libc.
NOTE: after r341775 (committed on January 29, 2014) and other
following commits, a few ports, including devel/glib20, depend
on the converters/libiconv again due to missing functionality in the
base iconv implementation.
Due to this change some major overhauling of the ports tree has
been necessary to move the ports to using that implementation.
People using pkgng binary packages should have little problems,
"pkg upgrade" will update all software to not depend on libiconv
anymore, once updated packages are available. Please make sure to
perform a "pkg autoremove" after that and check that libiconv is
correctly removed by it.
If you are using ports the update requires some manual intervention.
The following procedure should be followed:
# pkg query %ro libiconv >ports_to_update
# pkg delete -f libiconv
# cat ports_to_update | xargs portmaster
or:
# pkg query %ro libiconv >ports_to_update
# pkg delete -f libiconv
# cat ports_to_update | xargs portupgrade -f
20130831:
AFFECTS: users of graphics/gdal
AUTHOR: sunpoet@FreeBSD.org
Due to changes in header files, please deinstall gdal first while updating
from 1.9.x to 1.10.x.
20130830:
AFFECTS: users of mail/meta1
AUTHOR: dinoex@FreeBSD.org
The on disk format has changed.
Please make sure that queue is empty before you update.
20130817:
AFFECTS: users of lang/python*
AUTHOR: mva@FreeBSD.org
The lang/python* ports do not install links to 2to3, idle, pydoc, python
and other binaries anymore. Those were moved into the lang/python2 and
lang/python3 ports respectively. This change brings us closer to the goal
of making Python ports usable with different Python versions at the same
time.
If you have lang/python2* or lang/python3* installed, please also install
the associated lang/python2 or lang/python3 port.
1. update lang/python2* and/or lang/python3*
2. install lang/python2 and/or lang/python3
3. install/update lang/python
20130816:
AFFECTS: users of graphics/opendx and math/octave-forge-octcdf
AUTHOR: stephen@FreeBSD.org
These two ports have changed the science/netcdf dependency to
science/netcdf4. It is recommended that the science/netcdf package
be deinstalled before rebuilding these ports, otherwise you are likely
to face port conflicts when building future ports.
20130806:
AFFECTS: users of devel/eric4
AUTHOR: bsam@FreeBSD.org
Since PKGVERSION=4.5.13_1 the default file destination has changed from
${PYTHON_SITELIBDIR}/eric4 to ${DATADIR}.
20130731:
AFFECTS: users of glib20
AUTHOR: kwm@FreeBSD.org
The devel/gio-fam-backend port was removed in the glib 2.36 update.
Since the gio-fam-backend port was used in USE_GNOME=glib20, all
dependencies need to be rebuilt. The removal of gio-fam-backend isn't
critical, glib20 using programs should work just fine if the port is still
installed. It is not clear however, if glib20 will use the new kqueue
backend or the old fam backend.
Note that users of pkg packages can just run the pkg delete command after
their next update.
# portmaster -r gio-fam-backend
# pkg_delete gio-fam-backend-\* (for pkgng: pkg delete gio-fam-backend)
# portmaster -a
or
# portupgrade -rf gio-fam-backend
# pkg_delete gio-fam-backend-\* (for pkgng: pkg delete gio-fam-backend)
# portupgrade -a
20130726:
AFFECTS: users of Qt 3 and KDE 3
AUTHOR: rene@FreeBSD.org
All ports based on Qt 3 (including KDE 3 but also ports which used Qt 3
as a graphical toolkit) expired on 20130701 because Qt 3 and KDE 3 were
no longer maintained upstream. These ports have been removed today.
Users of KDE 3 are advised to switch to another desktop environment
provided in the Ports Collection, e.g. KDE 4 or Xfce.
Users of Qt 3 are advised to upgrade to the Qt 4 counterpart(s).
20130725:
AFFECTS: users of net/openafs
AUTHOR: bjk@FreeBSD.org
The OpenAFS 1.6.5 release is a security release which requires substantial
configuration changes to the AFS servers in addition to the software update,
in order to be fully protected. The entry for OPENAFS-SA-2013-003 on
http://www.openafs.org/security/ has links to the upgrade documentation.
The procedure involves rekeying the cell to a non-DES krb5 key, stored in
a krb5 keytab named rxkad.keytab in PREFIX/etc/openafs/server/.
20130720:
AFFECTS: users of japanese/mozc-server and japanese/mozc-el
AUTHOR: hrs@FreeBSD.org
The bin/mozc_emacs_helper program is now built and installed by
japanese/mozc-server because the build processes are heavily
overlapped with each other and the helper program does not depend on
most of what mozc-server does actually. To upgrade them, please remove
mozc-el first to prevent a conflict with the installed bin/mozc_emacs_helper.
20130719:
AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client, sysutils/bacula-bat
AUTHOR: dvl@FreeBSD.org
The configuration files for bacula have been moved to PREFIX/etc/bacula.
Move your existing configuration files to this directory after
upgrading.
20130718:
AFFECTS: users of security/logcheck
AUTHOR: glarkin@FreeBSD.org
The logcheck port now provides a configuration option controlling
installation of the crontab file. When installing the port interactively,
the port option is enabled by default to mimic previous behavior.
When the port is installed non-interactively (BATCH=yes) the crontab
file *will not* be installed automatically. If the EXAMPLES port option
is enabled, the crontab file can be installed manually at a later time
from EXAMPLESDIR/crontab.in.
20130718:
AFFECTS: users of www/zend-framework
AUTHOR: wg@FreeBSD.org
zend-framework has been updated to 2.2.1 and old 1.12.0 has been copied
to www/zend-framework1. If you wish to stay with the older version run:
# portmaster -o www/zend-framework1 www/zend-framework
or
# portupgrade -fo www/zend-framework1 www/zend-framework
or
# pkg set -o www/zend-framework:www/zend-framework1
20130714:
AFFECTS: users of net/avahi-gtk
AUTHOR: kwm@FreeBSD.org
Avahi was updated to 0.6.31, due to changes in the avahi-gtk port it will
be necessary to remove the avahi-gtk port before updating.
Users of pkg packages can skip this step.
# pkg_delete -f avahi-gtk\*
or
# pkg delete -f avahi-gtk
followed by
# portmaster net/avahi-gtk
or
# portupgrade net/avahi-gtk
20130711:
AFFECTS: users of dns/py-ldns
AUTHOR: mat@FreeBSD.org
The dns/py-ldns port now only installs the Python bits, and depends on
dns/ldns. Because of that, you cannot just do a regular upgrade, it
would install dns/ldns overwriting existing files and removing them when
removing the old version of dns/py-ldns.
# pkg_delete -f py-ldns-\*
# cd /usr/ports/dns/py-ldns && make clean && make install clean
or
# pkg delete -fg py-ldns-\*
# pkg install -f dns/py-ldns
20130707:
AFFECTS: users of www/ajaxplorer
AUTHOR: madpilot@FreeBSD.org
Ajaxplorer was updated to 5.0.1. This is a major update and some
manual intervention may be needed.
Before upgrading you should preserve the following files in WWWDIR
(defaults to PREFIX/www/ajaxplorer) if you have customized them:
conf/bootstrap_conf.php
conf/bootstrap_context.php
conf/bootstrap_plugins.php
conf/bootstrap_repositories.php
and put them back after the upgrade.
If you are using a database backend you will need to manually
update your database table using the sql script the port will
install at WWWDIR/conf/conf/4.2.3-5.0.0-db-upgrade.sql
Don't forget to check the documentation about upgrading from
version 4.x at:
http://ajaxplorer.info/ajaxplorer-5-0-0:/#Upgrade_from_4X_to_500
20130706:
AFFECTS: users of devel/apr1
AUTHOR: ohauer@FreeBSD.org
APR was updated to 1.4.8 and APR-util was updated to 1.5.2.
Please rebuild all ports which are using functions from APR/APR-util
such as Apache, Subversion, etc.
# portmaster -r apr
or
# portupgrade -r devel/apr1
or
# pkg install -fR devel/apr1
20130705:
AFFECTS: users of x11/kdelibs4
AUTHOR: kde@FreeBSD.org
The KDE Software Compilation 4.10.4 was committed a few days ago, and
version 4.10.5 was committed today.
They include better support for using clang as the compiler, but that
requires recompiling all KDE ports which depend on x11/kdelibs4. Most
ports which fall into this category are already part of the KDE Software
Compilation and have been updated to version 4.10.5, but those released
separately need to be rebuilt manually.
If you are building your KDE ports with clang, doing the following is
recommended:
# portmaster -r kdelibs-4\*
or
# portupgrade -fr x11/kdelibs4
or
# pkg install -fR x11/kdelibs4
Alternatively, to avoid rebuilding the ports which are part of the 4.10.5
update:
# portmaster -x \*-4.10.5\* -r kdelibs-4\*
or
# portupgrade -x \*-4.10.5\* -fr x11/kdelibs4
20130703:
AFFECTS: users of comms/trustedqsl and comms/tqsllib
AUTHOR: db@FreeBSD.org
Upstream have removed the need for a separate port for the library
formerly found in comms/tqsllib. Please remove tqsllib before installing
trustedqsl
20130627:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Since June 22nd, portmaster no longer relies on 'WITH_PKGNG' to be defined,
or ports to be checked out to enable pkgng support.
It now considers whether or not pkg is installed and registered with itself.
I.e., if this returns data, pkgng is considered in use:
# pkg info pkg
It's possible that you may have tested pkgng in the past, ran pkg2ng, and
never fully committed to it by setting WITH_PKGNG. If this is the case,
uninstall pkg with pkg_info/pkg_delete and also remove the stale database,
rm /var/db/pkg/local.sqlite.
This could manifest itself as portmaster -L showing the wrong versions, or
portmaster no longer detecting installed packages correctly.
Note that PORTS still require WITH_PKGNG=yes in make.conf if you are not
running CURRENT.
20130627:
AFFECTS: users of net/samba36
AUTHOR: timur@FreeBSD.org
Samba has updated format of it's printing tdbs (ntprinting.tdb, ntforms.tdb,
ntdrivers.tdb) to include character encoding. When updating from Samba 3.5
or earlier to Samba 3.6 or 4.0 these tdbs need to be migrated to new registry
based printing management. This implies also character conversion.
You have to specify the correct code page for the conversion, see iconv -l.
The mostly used one is Windows Latin1 which is CP1252.
You can correctly view the tdb with:
# net printing dump encoding=CP1252 /path/to/ntprinters.tdb
or migrate it with e.g.:
# net printing migrate encoding=CP1252 /path/to/ntprinters.tdb
If you migrate printers it is suggest to do it in the following order:
ntforms.tdb
ntdrivers.tdb
ntprinting.tdb
Don't forget to rename, move or delete these files in /var/db/samba after
the migration.
20130623:
AFFECTS: users of net-im/mikutter003
AUTHOR: tota@FreeBSD.org
net-im/mikutter003 has been removed from the ports tree because the
Twitter API version 1.0 was deprecated on 2013-05-07 and mikutter003,
which uses the API 1.0, won't work.
Please consider using net-im/mikutter instead of this.
1. deinstall mikutter003
2. upgrade Ruby to 1.9( or later) (see the entry 20130527)
3. install net-im/mikutter
20130623:
AFFECTS: users of www/magento
AUTHOR: melvyn@magemana.nl
Magento has been updated to 1.7.0.2 on 2013-06-03. With it a stricter file
system policy is enforced on the port. If you (or your customer) rely heavily
on Magento Connect via the backend to install extensions, your quickfix is:
# chown -R www: ${PREFIX}/www/magento
# chmod -R u+w ${PREFIX}/www/magento
The more conservative approach:
# chown -R www: ${PREFIX}/www/magento/app/code/{local,community} \
${PREFIX}/www/magento/app/{design,locale} \
${PREFIX}/www/magento/{downloader,skin}
# chmod -R u+w ${PREFIX}/www/magento/app/code/{local,community} \
${PREFIX}/www/magento/app/{design,locale} \
${PREFIX}/www/magento/{downloader,skin}
The conservative approach will alert you to extensions that try to write in
Magento core, while allowing clean extensions to install properly (corner
cases may exist).
20130619:
AFFECTS: users of devel/subversion
AUTHOR: ohauer@FreeBSD.org
devel/subversion has been upgraded from 1.7.10 to 1.8.0
If you want to upgrade, and use http/https access to repositories,
please check, that the SERF option is enabled, as NEON support
is gone. Also, mod_dontdothat and svnauthz_validate are
now enabled with one option TOOLS, among other new tools
and SVNMUCC is enabled always.
subversion-1.7.x is available as devel/subversion17
To stay on subversion-1.7.x set in /etc/make.conf
WITH_SUBVERSION_VER=17
and use the following command
# pkg set -o devel/subversion:devel/subversion17
or
# portmaster -o devel/subversion17 devel/subversion
20130614:
AFFECTS: users who set port options in make.conf
AUTHOR: tijl@FreeBSD.org
Configuring options in make.conf using variables like OPTIONS_SET and
OPTIONS_UNSET now also suppresses the option dialog for those options.
This means that when building a port the option dialog will only appear if
there are truly new options that have not been configured before using either
the dialog or make.conf. This allows you to set options like DOCS, NLS,
X11, etc. once for all ports and not have option dialogs pop up if those are
the only options. For a list of variables you can set in make.conf to
control options see Mk/bsd.options.mk.
20130612:
AFFECTS: users of lang/perl* and any port that depends on it
AUTHOR: az@FreeBSD.org
lang/perl5.12 has been upgraded from version 5.12.4 to 5.12.5
lang/perl5.14 has been upgraded from version 5.14.2 to 5.14.4
lang/perl5.16 has been upgraded from version 5.16.2 to 5.16.3
The directory structure where Perl is installed has also been modified:
"major.minor" is now used instead of "major.minor.patchlevel".
The "perl-after-upgrade" script has been removed.
Please rebuild all Perl ports and all ports that depend on it:
# portmaster -r perl
or
# portupgrade -rf perl
or
# pkg install -fR perl
20130609:
AFFECTS: users of audio/flac and any port that depends on it
AUTHOR: naddy@FreeBSD.org
FLAC has been updated to 1.3.0 and the shared library versions
have been bumped. Please rebuild all ports that depend on it:
# portmaster -r flac
or
# portupgrade -fr audio/flac
or
# pkg install -fR audio/flac
20130607:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.4 released.
20130604:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
The Glorious Glasgow Haskell Compiler has been updated to version
7.6.3 and Haskell Platform to 2013.2.0.0. Hence it is recommended to
rebuild or reinstall all the dependent ports by one of the following
commands:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
Note that prefixes used for hs- ports (Cabal packages) have been
changed to PREFIX/{lib,share,share/doc}/cabal/ghc-GHC_VERSION to
enable more seamless upgrades in the future.
20130603:
AFFECTS: users of dns/opendnssec
AUTHOR: wg@FreeBSD.org
Some database changes have been made between version 1.3 and 1.4,
upgrading needs to be done manually by running the following scripts:
For MySQL users:
PREFIX/share/opendnssec/migrate_adapters_1.mysql
For SQLite users:
PREFIX/share/opendnssec/migrate_adapters_1.sqlite3
For the full migration explanation see:
PREFIX/share/doc/opendnssec/MIGRATION
opendnssec 1.3 version was preserved as dns/opendnssec13 port.
20130601:
AFFECTS: users of textproc/ack
AUTHOR: rakuco@FreeBSD.org
ack has been updated to version 2.04. It is slightly incompatible with some
options present in ack1. For more information, see
http://beyondgrep.com/ack-2.0.
20130530:
AFFECTS: users of irc/inspircd
AUTHOR: swills@FreeBSD.org
The irc/inspircd port has been updated to 2.0.12. Some of the config option
names in the rc script have been changed. Check the script for more detail.
20130527:
AFFECTS: users of lang/ruby18
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 1.8 to 1.9. First, stop any
software that uses ruby. Then, you'll need to rebuild all ports that depend
on ruby:
If you use portmaster:
# portmaster -o lang/ruby19 lang/ruby18
# portmaster -R -r ruby-1.9
If you use portupgrade:
# portupgrade -f lang/ruby18
# portupgrade -f lang/ruby19 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.8.\* -fr lang/ruby18
After these steps are complete, you can pkg_delete ruby 1.8 if you
no longer need it.
If you use pkgng:
# pkg set -o lang/ruby18:lang/ruby19
# pkg install -fR lang/ruby19
If you wish to keep the 1.8 version as default, add the following lines
to your /etc/make.conf file:
#
# Keep ruby 1.8 as default version.
#
RUBY_DEFAULT_VER=1.8
20130525:
AFFECTS: users of sysutils/rsyslog5*
AUTHOR: brd@FreeBSD.org
Rsyslog 5.x has reached end of life status and has therefore been removed.
While sysutils/rsyslog6* exists, please consider migrating to
sysutils/rsyslog7 as that is the currently supported release.
20130525:
AFFECTS: users of mail/postgrey
AUTHOR: Darren Pilgrim <ports.maintainer@evilphi.com>
The RC script for postgrey has been modified. If you use the
default value for postgrey_flags this does not affect you.
If you have postgrey listening on a Unix socket or set any optional
values, please read the comments in the RC scripts and check your
settings in rc.conf prior to restarting postgrey.
20130525:
AFFECTS: users of x11/xorg and all xorg ports
AUTHOR: zeising@FreeBSD.org
X.Org, including libraries and some drivers, was updated. If you are
running the default X.Org distribution, no special upgrade procedure
should be necessary.
If you are running with WITH_NEW_XORG= make sure to update and rebuild
all installed drivers since xorg-server has been updated.
20130520:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
This is the first stable release based on Lucene 4. We recommend testing
the upgrade before doing it in production.
Upgrading from 0.20 requires a full cluster restart.
In order to be able to downgrade, stop indexing new data, issue a flush
request, do the upgrade and only enable indexing of new data once you
are certain that you no longer need to downgrade. Once new data has
been indexed, downgrading is no longer possible. To be extra safe, back
up your data before upgrading.
20130519:
AFFECTS: users of net/activemq
AUTHOR: tj@FreeBSD.org
The JVM used by activemq has changed to OpenJDK 7. You will need to
make sure javavmwrapper is configured to use the installed
java/openjdk7 JVM.
20130512:
AFFECTS: users of devel/hs-git-annex
AUTHOR: haskell@FreeBSD.org
On FreeBSD, git-annex incorrectly calculated SHA256 hashes for files
added to the annex repository due to the BSD-style output of
/sbin/sha256. The result of this is silent data corruption.
This problem has been fixed, but every file stored in an annex
repository will fail a `git-annex fsck` after the upgrade. Thus,
before updating, it is wise to issue the command below and restore the
files.
$ git-annex uninit
Corruptions can then be found by finding all files with the same hash.
Note that only files that were mishashed to the same location are a
problem.
20130511:
AFFECTS: users of TeX
AUTHOR: hrs@FreeBSD.org
One can now choose TeXLive or teTeX by using TEX_DEFAULT.
Specifying TEX_DEFAULT=texlive, almost all of ports which use TeX
will install and depend on TeXLive-based ones. Note that the
default value is still "tetex" and the two cannot coexist. You need
to remove all of the TeX-related packages based on teTeX to try
TeXLive.
20130507:
AFFECTS: users of comms/usbmuxd or comms/libimobiledevice
AUTHOR: avilla@FreeBSD.org
libusbmuxd and libimobiledevice versions have changed. Please, rebuild
all the ports that depend on them:
# portmaster -r usbmuxd
or
# portupgrade -fr comms/usbmuxd
or
# pkg install -fR comms/usbmuxd
20130507:
AFFECTS: users of devel/libplist
AUTHOR: avilla@FreeBSD.org
libplist Python bindings were split from the main port. To get them you
need to install devel/py-libplist.
20130506:
AFFECTS: users of TeX
AUTHOR: hrs@FreeBSD.org
TeXLive ports have been imported. Although most of ports still depend
on teTeX at this moment, they will be converted to use TeXLive.
The directory layout of them is as follows. Please use print/texlive-full
if you are not familiar with how each component works. Finer-grained
ports will be added (specifically, meta ports for smaller installation
and so on). Note that the full installation needs around 3GB of disk space.
teTeX-based ports and TeXLive are mutually exclusive. This means TeXLive
ports cannot be installed when teTeX is already installed. You need
to remove all of the TeX-related packages based on teTeX to try TeXLive.
Migration procedure will be announced when conversion of the port
dependency is completed.
* Meta port
- print/texlive-full: meta port to install all of the TeXLive components
* Libraries
- devel/tex-kpathsea: kpathsea library
- devel/tex-web2c: WEB2C toolchain and TeX engines
- print/tex-ptexenc: character code conversion library for pTeX
* Base part of the TeXLive
- print/texlive-base: binary programs in TeXLive
- print/texlive-texmf: macro and font data in TeXLive
- print/texlive-infra: tlmgr dependency (Perl modules)
- print/tex-formats:
* TeX Formats
- print/tex-formats: TeX, LaTeX, PDFTeX, AMSTeX, ConTeXT, CSLaTeX,
EplainTeX, METAFONT, MLTeX, PDFTeX, TeXsis
- print/tex-aleph: Aleph/Lambda
- print/tex-xetex: XeTeX
- print/tex-luatex: LuaTeX
- print/tex-jadetex: JadeTeX
- print/tex-xmltex: XMLTeX
- japanese/tex-ptex: pTeX
* DVI ware
- print/tex-xdvik: XDvi
20130503:
AFFECTS: users of security/libgcrypt and any port that depends on it
AUTHOR: ehaupt@FreeBSD.org
The libgcrypt port has been updated to 1.5.2 and all shared libraries
versions have been bumped. So you need to rebuild all applications that
depend on libgcrypt. Do something like:
# portmaster -r libgcrypt
or
# portupgrade -rf libgcrypt
Alternatively, you may install sysutils/bsdadminscripts, run pkg_libchk and
rebuild all detected ports:
# pkg_libchk | tee /tmp/rebuild
# awk -F':' '/libgcrypt.so/ {print $1}' /tmp/rebuild | sort | uniq \
| xargs portmaster -D
20130502:
AFFECTS: users of ports-mgmt/pkg, ports-mgmt/poudriere, ports-mgmt/tinderbox
AUTHOR: bdrewery@FreeBSD.org
This only affects people who are _building_ binary packages for pkgng. If you
are building from ports please ignore this. This step is optional.
It is recommended to rebuild all packages and then have your users run 'pkg
check -Ba' and 'pkg upgrade' on their servers once. This will allow the new
shlib tracking to reinstall packages that have changed shlib requirements.
20130427:
AFFECTS: users of print/a2ps-{a4,letter}, print/c2ps-{a4,letter}, print/lprps-{a4,letter}, or graphics/jpeg2ps-{a4,letter}
AUTHOR: hrs@FreeBSD.org
The affected ports have been converted to use libpaper for the default paper
size as print/psutils did. For more detail, see 20130424 below.
20130424:
AFFECTS: users of print/psutils-a4 or print/psutils-letter
AUTHOR: hrs@FreeBSD.org
print/psutils-a4 and print/psutils-letter have been merged into a single port
print/psutils. The default paper size in psnup(1), psresize(1), and
pstops(1) is now selected via an environment variable and/or a configuration
file of libpaper(3). For more detail, see papersize(5) and paperconfig(8)
manual page. If you prefer A4 or letter size by default as the old
version did, please install print/papersize-default-a4 or
print/papersize-default-letter, which installs a papersize configuration
file without manual configuration.
20130423:
AFFECTS: users of mail/postfix
AUTHOR: sahil@FreeBSD.org
This is a significant update; so, please carefully review the
RELEASE_NOTES to identify which incompatible changes impact your
environment.
20130408:
AFFECTS: users of astro/libkgeomap, graphics/digikam-kde4, graphics/kipi-plugins-kde4
AUTHOR: makc@FreeBSD.org
Digikam ports have been updated and split. Previous versions have
to be deinstalled before upgrade:
# pkg_delete -f digikam-2\* kipi-plugins-2\* libkgeomap-2\*
or
# pkg delete -fg digikam-2\* kipi-plugins-2\* libkgeomap-2\*
20130403:
AFFECTS: users of mail/thunderbird-esr*
AUTHOR: flo@FreeBSD.org
Mozilla stopped providing 2 versions of thunderbird. The only one lives
in mail/thunderbird if you are using thunderbird-esr please switch to
thunderbird by running on of the following commands.
# portupgrade -o mail/thunderbird mail/thunderbird-esr
# portupgrade -o mail/thunderbird-i18n \
mail/thunderbird-esr-i18n (if installed)
or
# portmaster -o mail/thunderbird mail/thunderbird-esr
# portmaster -o mail/thunderbird-i18n \
mail/thunderbird-esr-i18n (if installed)
20130331:
AFFECTS: users of */hs-*
AUTHOR: haskell@FreeBSD.org
Due to some unexpected dynamic linking problems, Haskell Cabal ports with
binaries that link to their own libraries may not work. With default
configuration, the following ports are known to have this problem:
Agda, BNFC, pandoc, and uuagc. (Their port revision are now bumped.)
In general, it is recommended to rebuild the port if you are
experiencing that the corresponding binary will not start, e.g.:
% agda
Shared object "libHSAgda-2.3.2-ghc7.4.2.so" not found, required by "agda"
20130329:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Portmaster 3.15 should be skipped if you are not using pkgng and are on
9.1, 8-STABLE, 9-STABLE, or CURRENT. It may require manual upgrading to
3.16:
# make -C /usr/ports/ports-mgmt/portmaster build deinstall install clean
20130329:
AFFECTS: users of net/kio-upnp-ms
AUTHOR: avilla@FreeBSD.org
A wrong setting in x11/kdelibs4 was causing some unlisted files to
be installed. Remember to delete them after updating x11/kdelibs4 to
4.10.1_1:
# rm /usr/local/kde4/bin/upnpmstest
# rm /usr/local/kde4/bin/stattest
# rm /usr/local/kde4/bin/recursive_upnp
20130327:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
Privilege separation is enabled in OpenSMTPD port from 5.3,1. Users
upgrading from version 201303011853 or earlier are required to follow
the instructions in pkg-message to fix the filesystem permissions on
OpenSMTPD spool directories.
20130327:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.10.1. kdelibs4 does no longer
directly use aspell or hspell, to regain their functionality enable
corresponding option in textproc/enchant.
A number of ports have been split and must be deinstalled before
upgrading:
# pkg_delete -f kdegames-4\* kde-workspace-4\* kde-wallpapers-4\*
or
# pkg delete -fg kdegames-4\* kde-workspace-4\* kde-wallpapers-4\*
20130326:
AFFECTS: users of deskutils/strigi
AUTHOR: makc@FreeBSD.org
Strigi port has been split on libraries, client, daemon, and utilities.
Manual update is required:
# cd /usr/ports/deskutils/strigi && make deinstall && \
make clean && make install clean
or
# pkg delete -f strigi && pkg upgrade && pkg install deskutils/strigi
20130323:
AFFECTS: users of archivers/libarchive
AUTHOR: glewis@FreeBSD.org
The archivers/libarchive port has been updated to 3.1.2. The shared library
version has changed from 12 to 14. Please rebuild all ports that depend on
it:
# portmaster -r libarchive
or
# portupgrade -fr archivers/libarchive
or
# pkg install -fR archivers/libarchive
20130319:
AFFECTS: users of ports
AUTHOR: bdrewery@FreeBSD.org
Ports now use ports-mgmt/dialog4ports to render and interact with the
options dialog in 'make config'. This will be automatically built and
installed on the first use.
dialog4ports provides a new UI able to represent all the features provided
by the new options framework.
20130319:
AFFECTS: users of net/freerdp
AUTHOR: fluffy@FreeBSD.org
The net/freerdp package was changed API and require to deinstall previous
version first to avoid build conflicts.
20130317:
AFFECTS: users of graphics/poppler
AUTHOR: gnome@FreeBSD.org
The graphics/poppler has been updated to 0.22.2. The shared library version
has changed from 18 to 34. Please rebuild all ports that depends on it:
# portmaster -r poppler-0
or
# portupgrade -fr graphics/poppler
or
# pkg install -fR graphics/poppler
20130317:
AFFECTS: users of devel/protobuf
AUTHOR: vanilla@FreeBSD.org
The devel/protobuf has been updated to 2.5.0. The shared library version
has changed from 7 to 8. Please rebuild all ports that depends on it:
# portmaster -r protobuf
or
# portupgrade -fr devel/protobuf
or
# pkg install -fR devel/protobuf
20130316:
AFFECTS: users of converters/libiconv and devel/gettext
AUTHOR: bapt@FreeBSD.org
libiconv now handles the lib/charset.alias file instead of devel/gettext.
If you are using pkgng 'and' upgrading from source with portupgrade or
portmaster, first delete gettext, upgrade libiconv, then reinstall gettext.
This will break sudo, so you *must* do this in a root shell (sudo -i)
if you use sudo.
# pkg delete -f devel/gettext
# portmaster converters/libiconv devel/gettext
or
# pkg delete -f devel/gettext
# portupgrade converters/libiconv devel/gettext
20130308:
AFFECTS: users of net-im/folks and devel/libgee
AUTHOR: kwm@FreeBSD.org
folks and libgee have been repocopied net-im/folks04 and devel/libgee06
respectively. Please do the following according to package manager used.
# portmaster -o devel/libgee06 devel/libgee
# portmaster -o net-im/folks04 net-im/folks
or
# portupgrade -fo devel/libgee06 devel/libgee
# portupgrade -fo net-im/folks04 net-im/folks
or
# pkg set -o devel/libgee:devel/libgee06
# pkg set -o net-im/folks:net-im/folks04
20130307:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
textproc/elasticsearch has been updated to 0.20.5. This update also
changes the required JDK to OpenJDK 7 as there are known issues when
running on a Java 1.6 JDK.
20130307:
AFFECTS: users of audio/liblastfm
AUTHOR: nivit@FreeBSD.org
The audio/liblastfm has been updated to 1.0.6. The shared library version
has changed from 0 to 1. Please rebuild all ports that depends on it:
If you use portmaster:
portmaster -r liblastfm
If you use portupgrade:
portupgrade -fr audio/liblastfm
If you use pkgng with binary packages:
pkg install -fR audio/liblastfm
20130305:
AFFECTS: users of devel/py-setuptools (i.e you)
AUTHOR: rm@FreeBSD.org
devel/py-setuptools was replaced with devel/py-distribute. Please do
the following according to package manager used. py-setuptools port
will be removed shortly.
# portmaster -o devel/py-distribute devel/py-setuptools
or
# portupgrade -fo devel/py-distribute devel/py-setuptools
or
# pkg set -o devel/py-setuptools:devel/py-distribute
# pkg install -f devel/py-distribute
20130226:
AFFECTS: users of textproc/apache-solr
AUTHOR: vanilla@FreeBSD.org
textproc/apache-solr has been repocopied to textproc/apache-solr3.
If you need to continue with the old stable version please run
# portmaster -o textproc/apache-solr3 textproc/apache-solr
or
# portupgrade -fo textproc/apache-solr3 textproc/apache-solr
or
# pkg set -o textproc/apache-solr:textproc/apache-solr3
20130218:
AFFECTS: users of net/samba4-devel
AUTHOR: timur@FreeBSD.org
The port was renamed into net/samba4 and is going to replace older
development version of Samba4. You can upgrade it with:
# portmaster -o net/samba4 net/samba4-devel
In case you want to upgrade from net/samba36 make sure, that you've
made backup of /usr/local/etc/smb.conf and the content of /var/db/samba/
directory.
There is no direct upgrade path from Samba3 to Samba4, but you can
always try:
# portmaster -o net/samba4 net/samba36
Make sure you've read instructions from the supplied README.FreeBSD
file and read all the relevant pages on http://wiki.samba.org/
We still miss necessary support for Samba4 from base ntpd and bind9,
port versions are also are not ready yet, but been worked on.
Please note, that Samba4 is still in it's early days, so there are
bugs both from my side and it's own, so be careful with placing it
into production.
20130206:
AFFECTS: users of sysutils/boxbackup
AUTHOR: bdrewery@FreeBSD.org
The default location of the configuration files changed from
/usr/local/etc/box to /usr/local/etc/boxbackup. Move your
configuration after upgrading:
mv /usr/local/etc/box /usr/local/etc/boxbackup
20130206:
AFFECTS: users of x11/wbar
AUTHOR: nivit@FreeBSD.org
wbar has been updated to 2.3.4. The new version uses a different icon
for the dock background, so you have to replace the old one in your
config file ~/.wbar
Replace
i: /usr/local/share/pixmaps/wbar/osxbarback.png
with
i: /usr/local/share/pixmaps/wbar/dock.png
20130206:
AFFECTS: users of security/libtasn1 and any port that depends on it
AUTHOR: novel@FreeBSD.org
libtasn1 has been updated to 2.14 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
libtasn1.
If you use portmaster:
portmaster -r libtasn1
If you use portupgrade:
portupgrade -fr security/libtasn1
If you use pkgng with binary packages:
pkg install -fR security/libtasn1
20130206:
AFFECTS: users of Tcl/Tk
AUTHOR: gahr@FreeBSD.org
The following ports have been removed, as threads and modules are
now included in the main ports:
- lang/tcl84-thread
- lang/tcl85-thread
- lang/tcl86-thread
- lang/tcl-modules
- x11-toolkits/tk84-thread
- x11-toolkits/tk85-thread
- x11-toolkits/tk86-thread
Please remove them ...
If you use pkgng:
pkg delete -f <port>
If you use pkg_* tools
pkg_delete -f <port>
... before rebuilding all ports that depend on them:
If you use portmaster:
portmaster -w -r <port>
If you use portupgrade:
portupgrade -Ofr <origin/port>
If you use pkgng with binary packages:
pkg install -fR <origin/port>
20130205:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that the recent devel/libffi update caused some breakage in the Haskell
ports with the DYNAMIC option enabled. The problem has been identified and
fixed since then. All Haskell ports have been updated to their latest stable
versions or bumped as DYNAMIC is enabled by default.
Hence it is recommended to rebuild or reinstall all ports depending on GHC
by one of the following commands:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
20130205:
AFFECTS: users of editors/libreoffice
AUTHOR: bapt@FreeBSD.org
LibreOffice has been updated to 3.6.5 with a bundle version of libcmis. The
build will fail if you sill have net/libcmis 0.1 installed. Before upgrading
LibreOffice you should either first remove libcmis from your system or upgrade
it to version 0.3.
20130205:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.12.23 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls.
If you use portmaster:
portmaster -r gnutls
If you use portupgrade:
portupgrade -fr security/gnutls
If you use pkgng with binary packages:
pkg install -fR security/gnutls
20130204:
AFFECTS: users of sysutils/zfstools
AUTHOR: bdrewery@FreeBSD.org
The zfstools package has dropped the 'rubygem-' prefix and now installs
its binary files to PREFIX/sbin instead of PREFIX/bin.
20130204:
AFFECTS: users of multimedia/qt4-phonon, multimedia/qt4-phonon-gst
AUTHOR: makc@FreeBSD.org
qt4-phonon has been deprecated in favour of multimedia/phonon. Remove
WITH_QT_PHONON from your make.conf and replace qt4-phonon with
multimedia/phonon:
# portmaster -o multimedia/phonon multimedia/qt4-phonon
# portmaster -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
20130204:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: az@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been removed since they've
been EOL by upstream. You will have to recompile all perl dependant
ports after updating your ports tree. Please see entry 20110517 for help.
20130204:
AFFECTS: users of dns/poweradmin
AUTHOR: Edmondas Girkantas <eg@fbsd.lt>
Some database changes have been made between version 2.1.5 and 2.1.6,
upgrading needs to be done manually by running the following SQL:
For MySQL users:
ALTER TABLE users MODIFY username VARCHAR(64) NOT NULL DEFAULT '0';
ALTER TABLE users MODIFY password VARCHAR(128) NOT NULL DEFAULT '0';
For PostgreSQL users:
ALTER TABLE users ALTER COLUMN username TYPE VARCHAR(64);
ALTER TABLE users ALTER COLUMN password TYPE VARCHAR(128);
20130203:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.9.5. kdemultimedia4, kdenetwork4,
kde-runtime and kde-workspace ports have been split, they must be
deinstalled before running any port upgrade tool:
# pkg_delete -f kdemultimedia-4\* kdenetwork-4\* \
kde-workspace-4\* kde-runtime-4\*
20130202:
AFFECTS: users of net-p2p/deluge
AUTHOR: rm@FreeBSD.org
deluge port had switched to using libtorrent-rasterbar 0.16 as backend. Since
both of the versions of libtorrent are conflicting with each other, you need
to deinstall libtorrent-rasterbar-15 and libtorrent-rasterbar-15-python first
and then update deluge as usual. Please also keep in mind, that deluge does
not work via http-proxy when libtorrent-rasterbar 0.16 is used.
20130131:
AFFECTS: users of devel/boost-libs
AUTHOR: bapt@FreeBSD.org
boost has been updated to 1.52.0. Please rebuild all ports that depends
on it:
If you use portmaster:
portmaster -w -r boost-libs
If you use portupgrade:
portupgrade -fr devel/boost-libs
If you use pkgng with binary packages:
pkg install -fR devel/boost-libs
20130129:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
elasticsearch has been updated to 0.20.4. This upgrade requires a
full cluster restart after installation.
Upgrade steps:
1) Shutdown all cluster nodes
2) Install elasticsearch update
3) Start all cluster nodes
20130128:
AFFECTS: users of libffi
AUTHOR: jkim@FreeBSD.org
libffi has been updated to 3.0.11. Please rebuild all ports that
depends on it:
If you use portmaster:
portmaster -w -r libffi
If you use portupgrade:
portupgrade -fr devel/libffi
If you use pkgng with binary packages:
pkg install -fR devel/libffi
20130121:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
Please flush your mail queue before updating to version 201301191220.
20130116:
AFFECTS: users of games/py-anki
AUTHOR: araujo@FreeBSD.org
games/py-anki has been removed upstream and merged with games/anki.
Users of games/py-anki, from now must use games/anki.
20130114:
AFFECTS: users of www/hiawatha
AUTHOR: cs@FreeBSD.org
php-fcgi has been removed upstream from hiawatha and is not supported anymore.
It is recommended to move to another FastCGI implementation, e.g. PHP-FPM
(lang/php5).
20130113:
AFFECTS: users of security/openvpn*
AUTHOR: mandree@FreeBSD.org
security/openvpn has been upgraded to the IPv6-capable v2.3.0.
This upgrade moves easy-rsa into a separate package in
security/easy-rsa that is pre-selected as default run-time dependency,
and changes installed file layout a bit.
security/openvpn22 retains the prior OpenVPN 2.2.2 version.
If you want to continue using this version, use one of these commands:
# portmaster -o security/openvpn22 security/openvpn
or
# portupgrade -o security/openvpn22 security/openvpn
or
# pkg set -o security/openvpn:security/openvpn22
security/openvpn20 has been marked deprecated and to be removed
in half a year's time. Please migrate to a newer version soonish.
20130110:
AFFECTS: everyone using csup(1), net/cvsup, or cvs(1) to update the
ports tree
AUTHOR: wblock@FreeBSD.org
On February 28, 2013, the CVSup and CVS services will end:
http://lists.freebsd.org/pipermail/freebsd-ports-announce/2012-September/000026.html
csup(1), net/cvsup, and cvs(1) will no longer be able to update the
ports tree. Please switch to one of the alternate update methods of
portsnap(8) or devel/subversion before that time. The Handbook has
information on using these update methods:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
20130108:
AFFECTS: users of devel/libvanessa_socket, mail/perdition
AUTHOR: jhale@FreeBSD.org
The update of devel/libvanessa_socket to 0.0.12 (used by Perdition)
adds IPv6 support. If the hostname in bind_address has both IPv4 and
IPv6 addresses in DNS, then Perdition will ONLY listen on IPv6.
If you prefer to continue to use IPv4, you need to change the
bind_address in /usr/local/etc/perdition/perdition.conf to use an
explicit IPv4 address. This can be in addition to, or instead of,
the current hostname, depending on whether you want to use IPv6 or
not. If your Perdition server does not have an IPv6 address
listed in DNS, this change does not affect you.
20130108:
AFFECTS: users of sysutils/cfengine*
AUTHOR: gjb@FreeBSD.org
sysutils/cfengine has been created as a master port for the set of
sysutils/cfengine* ports. Users interested in tracking the latest
stable branch of cfengine should update their port origins to use
the new port, for example:
# portmaster -o sysutils/cfengine sysutils/cfengine33
or
# portupgrade -fo sysutils/cfengine sysutils/cfengine33
or
# pkg set -o sysutils/cfengine33:sysutils/cfengine
Users that switch their port origin and later wish to remain on
a particular cfengine release can override the default version by
adding CFENGINE_VERSION to /etc/make.conf, where CFENGINE_VERSION
is a value from:
# make -V VERSIONS
20130103:
AFFECTS: users of textproc/docproj*
AUTHOR: doceng@FreeBSD.org
textproc/docproj no longer requires WITH_JADETEX to be set to 'yes' or
'no', and by default, will enable the JADETEX dependencies.
The textproc/docproj-jadetex port has been removed as a result of this
change.
Users that have installed textproc/docproj and have set
WITH_JADETEX=no during compile time should update the package origin
to use textproc/docproj-nojadetex:
# portmaster -o textproc/docproj textproc/docproj-nojadetex
or
# portupgrade -fo textproc/docproj textproc/docproj-nojadetex
or
# pkg set -o textproc/docproj-nojadetex:textproc/docproj
Users that have installed textproc/docproj-jadetex should update the
package origin to use the textproc/docproj port:
# portmaster -o textproc/docproj textproc/docproj-jadetex
or
# portupgrade -fo textproc/docproj textproc/docproj-jadetex
or
# pkg set -o textproc/docproj-jadetex:textproc/docproj
Users that have installed textproc/docproj and have set
WITH_JADETEX=yes will not need to make any changes.
20130103:
AFFECTS: users of audio/baresip
AUTHOR: crees@FreeBSD.org
Baresip is tightly linked to the versions of audio/re and audio/rem, and
will not build against different versions.
To update without problems, the -R flag for portupgrade is mandatory, or
build will fail. Portmaster and pkgng will handle this correctly.
20130103:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: decke@FreeBSD.org
VirtualBox has been updated and does now depend on devel/kBuild instead
of devel/kBuild-devel. Both are in conflict with each other so this has
to be resolved manually. kBuild is only a build dependency so it is safe
to remove installed kBuild before updating.
# pkg_delete -f kBuild-\*
20130102:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
OpenSMTPD port has been updated to the latest portable snapshot. There
has been several changes to the configuration between the last version
and this version, which requires configuration file need to be reviewed.
20121230:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 9.1 released.
20121229:
AFFECTS: users of devel/libical
AUTHOR: gnome@FreeBSD.org
The devel/libical has been updated to 0.48. The shared library version has
been changed from 44 to 0. Please rebuild all ports that depends on it:
If you use portmaster:
portmaster -r libical
If you use portupgrade:
portupgrade -fr devel/libical
If you use pkgng with binary packages:
pkg install -fR devel/libical
20121228:
AFFECTS: users of databases/innotop, multimedia/zoneminder
net-mgmt/netdot, ports-mgmt/tinderbox, ports-mgmt/tinderbox-devel
sysutils/watchmen, www/MT
The above mentioned ports were converted to depend on
databases/p5-DBD-mysql. That will cause messages like
===> p5-DBD-mysql-4.021 conflicts with installed package(s):
p5-DBD-mysql55-4.021
To prevent this run one of the following commands to fix the
dependencies.
# portmaster -o databases/p5-DBD-mysql databases/p5-DBD-mysql55
or
# portupgrade -fo databases/p5-DBD-mysql databases/p5-DBD-mysql55
or
# pkg set -o databases/p5-DBD-mysql55:databases/p5-DBD-mysql
20121220:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that the Glorious Glasgow Haskell Compiler has been updated to
version 7.4.2.
Please rebuild or reinstall all dependent ports by issuing one of the
following commands, depending on the tool used:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
20121218:
AFFECTS: users of icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to 50.1. Please rebuild all ports that depend on it:
If you use portmaster:
portmaster -w -r icu
If you use portupgrade:
portupgrade -fr devel/icu
If you use pkgng with binary packages:
pkg install -fR devel/icu
20121212:
AFFECTS: users of openldap24-client who uses SASL
AUTHOR: Xin Li <delphij@FreeBSD.org>
There is a change in the openldap24-client port which removes the SASL
option. If the user previously install openldap24-client, but enabled
SASL from the config menu, the user would have to replace it with
openldap24-sasl-client.
Note that this only affects those who manually set SASL from the menu,
most of the users are not affected.
If you use portmaster:
portmaster -o net/openldap24-sasl-client openldap24-client
If you use portupgrade:
portupgrade -fo net/openldap24-sasl-client openldap24-client
If you use pkgng with binary packages:
pkg set -o net/openldap24-client:net/openldap24-sasl-client
20121212:
AFFECTS: users of horde-* applications
AUTHOR: Martin Matuska <mm@FreeBSD.org>
Horde3 has reached EOL and to make place for new horde application versions
all old horde3 applications have been renamed to use the "horde3-" prefix.
20121211:
AFFECTS: users of graphics/ImageMagick
AUTHOR: bdrewery@FreeBSD.org
The ImageMagick library has been updated to version 6.8.0-7. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r ImageMagick
If you use portupgrade:
portupgrade -fr graphics/ImageMagick
If you use pkgng with binary packages:
pkg install -fR graphics/ImageMagick
20121211:
AFFECTS: users of devel/pcre
AUTHOR: bdrewery@FreeBSD.org
The pcre library has been updated to version 8.32. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r pcre
If you use portupgrade:
portupgrade -fr devel/pcre
If you use pkgng with binary packages:
pkg install -fR devel/pcre
20121210:
AFFECTS: users of security/cyrus-sasl2
AUTHOR: ume@FreeBSD.org
The cyrus-sasl2 library has been updated to version 2.1.26. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r cyrus-sasl-
If you use portupgrade:
portupgrade -fr security/cyrus-sasl2
20121202:
AFFECTS: users of www/owncloud
AUTHOR: crees@FreeBSD.org
www/owncloud includes the entire WWWDIR directory structure in pkg-plist.
This means that if you upgrade it, your config files are added to pkg-plist,
and are then removed on the next deinstall.
This issue has been fixed, but you must back up your install of owncloud and
reinstall to avoid data loss;
# cd /usr/ports/www/owncloud
# tar cfC /tmp/owncloud.tar `make -VWWWDIR` .
# make deinstall
# tar xfC /tmp/owncloud.tar `make -VWWWDIR`
# make install clean && rm /tmp/owncloud.tar
20121201:
AFFECTS: users of www/typo3
AUTHOR: Helmut Ritter <freebsd-ports@charlieroot.de>
www/typo3 has been repocopied to www/typo347. If you need to continue with
the old stable version please run
# portmaster -o www/typo347 www/typo3
or
# portupgrade -fo www/typo347 www/typo3
or
# pkg set -o www/typo3:www/typo347
20121128:
AFFECTS: users of irc/znc
AUTHOR: jase@FreeBSD.org
znc has been updated to 1.0. This introduces some major changes to its
functionality. As a result, if you are upgrading from a previous version
you need to be aware that znc will automatically modify your
configuration file to incorporate support for the new functionality.
Users are recommended to take a backup of their configuration file
before running this new version.
The SASL option has been renamed to CYRUS following a rename of the
associated module. Additionally, a number of modules have been removed
or renamed in this release.
Modules that were classed as Extra modules in previous versions are now
built as standard. The EXTRA option has been removed accordingly.
Please refer to the following URL for detailed information regarding all
changes in this release:
http://wiki.znc.in/ChangeLog/1.0
20121128:
AFFECTS: users of www/opera
AUTHOR: itetcu@FreeBSD.org
If you are running KDE and you are using KDE's File dialog toolkit, and if
your Opera crashes on start with a 'libpng error: incorrect data check'
you can work around it by setting 'Dialog Toolkit=4' in your
.opera/operaprefs.ini [File Selector] section.
20121112:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
The git-daemon(1) process now runs as the git_daemon user. Please make
sure that this user has appropriate permissions to the repositories.
20121109:
AFFECTS: FreeBSD < 9.1 users of syslog-ng >= 3.3.6
AUTHOR: cy@FreeBSD.org
Syslog-ng version 3.3.6 changed the way how /dev/kmsg is read. If you
don't use the system() source (which configures it automatically),
please make sure, that in the kmsg related line follow-freq(1) is used
instead of the previously default follow-freq(0).
20121109:
AFFECTS: users of devel/py-liblarch_gtk deskutils/gtg
AUTHOR: rm@FreeBSD.org
Code of py-liblarch_gtk has been merged into py-liblarch 2.1.0. To avoid
any conflicts, user need to remove py-liblarch_gtk before the update of
py-liblarch.
20121105:
AFFECTS: users of mail/postfix-current
AUTHOR: sahil@FreeBSD.org
With this version of Postfix, the default master.cf now uses "unix"
instead of "fifo" for the pickup and qmgr services. In addition, a
new smtpd_relay_restrictions feature has been introduced for mail
relay control. For sites that do not define this parameter in
main.cf, the upgrade process will add an entry to main.cf. Please
read the RELEASE_NOTES to understand this new feature, how it may
affect your site, and backwards compatibility options.
20121104:
AFFECTS: users of lang/perl5.16
AUTHOR: az@FreeBSD.org
lang/perl5.16 has been updated to 5.16.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.16.
Please see its manual page for details.
If you are using binary packages with pkgng, not ports, do this instead of
"perl-after-upgrade":
# pkg install -fR perl
20121102:
AFFECTS: users of shells/bash-completion
AUTHOR: adamw@FreeBSD.org
The bash completion library has been updated to 2.0, and the mechanism
for activating the library has changed. To use the library, you must:
source /usr/local/share/bash-completion/bash_completion.sh
from your .bashrc file. See the pkg-message or README for a more
graceful invocation.
20121101:
AFFECTS: users of graphics/tesseract
AUTHOR: bf@FreeBSD.org
The trained English and OSD language data that were distributed in
graphics/tesseract have been moved to graphics/tesseract-data. The
latter port includes all available trained language data by default;
as before, users who desire a subset of languages may build smaller
packages by defining TESSERACT_LANGS during a build.
20121031:
AFFECTS: users of dns/ldns
AUTHOR: ak@FreeBSD.org
There is a binary incompatibility in ldns 1.6.14 which is fixed with an
emergency release of ldns 1.6.15.
Warning!
If you have compiled ldns using software with ldns-1.6.14, then this new
version will be binary incompatible with your installed version. You
will have to recompile the software together with ldns-1.6.15.
Was the software compiled with ldns-1.6.13 or earlier, then you will not
have this problem and can safely install ldns-1.6.15.
20121030:
AFFECTS: users of www/squid31
AUTHOR: flo@FreeBSD.org
The WITH_SQUID_ECAP option was removed from the port. If you use ECAP
you need to update to www/squid32, you can do so by running one of the
following commands:
# portmaster -o www/squid32 www/squid31
or
# portupgrade -fo www/squid32 www/squid31
20121025:
AFFECTS: users of net/activemq
AUTHOR: tj@FreeBSD.org
After reinstalling the port, if you wish to use the datastore used before
or have any undelivered persistent messages add the following to rc.conf:
activemq_data=/usr/local/activemq
20121022:
AFFECTS: users of net/samba36
AUTHOR: timur@FreeBSD.org
Startup rc.d/samba script was modified to address some problems with the
fine control of supplementary daemons. As a side effect now it's always
necessary to specify in rc.conf:
samba_enable=YES
to get the script working. You can still control each of the daemons
individually, by disabling/enabling them with:
nmbd_enable=NO
smbd_enable=NO
winbindd_enable=YES
20121015:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Portmaster now supports pkgng. To use pkgng, enable the patch in the port,
enable pkgng in your make.conf, and convert your existing /var/db/pkg
database. Also see UPDATING entry 20121010 if you are on a recent CURRENT
and do not want to use pkg.
This is optional and not currently required.
# make -C /usr/ports/ports-mgmt/pkg install clean
# make -C /usr/ports/ports-mgmt/portmaster config build deinstall install clean
# echo 'WITH_PKGNG=yes' >> /etc/make.conf
# pkg2ng
20121015:
AFFECTS: users of ports-mgmt/portupgrade
AUTHOR: bdrewery@FreeBSD.org
Portupgrade now supports pkgng. To use pkgng, enable it in your make.conf,
and convert your databases.
This is optional and not currently required.
# make -C /usr/ports/ports-mgmt/pkg install clean
# echo 'WITH_PKGNG=yes' >> /etc/make.conf
# pkg2ng
# pkgdb -fu
20121010:
AFFECTS: users of mail/enigmail*
AUTHOR: gecko@FreeBSD.org
Enigmail has been integrated into the Thunderbird / SeaMonkey build and
is available as option ENIGMAIL (enabled by default)
Before upgrading Thunderbird or SeaMonkey delete all installed enigmail
ports by running e.g.
# pkg_delete -f seamonkey-enigmail-1.4.3 thunderbird-esr-enigmail-1.4.3 \
thunderbird-enigmail-1.4.3
20121010:
AFFECTS: users of CURRENT (OSVERSION >= 1000017)
AUTHOR: bapt@FreeBSD.org
The ports tree is now using pkgng as the default package manager
for HEAD. This only affects users of CURRENT -- users of other
branches need not take any action.
To keep pkg_install as the default package manager, use the new
WITHOUT_PKGNG knob in make.conf
To make the switch:
1) Set WITHOUT_PKGNG=yes in make.conf and upgrade all your ports to
the latest available versions using your favourite tools.
2) Install ports-mgmt/pkg
3) Remove WITHOUT_PKGNG from make.conf and run:
# pkg2ng
20121009:
AFFECTS: users of multimedia/vdpau-video
AUTHOR: madpilot@FreeBSD.org
vdpau-video has been renamed upstream to libva-vdpau-driver. The
port has been changed accordingly.
Please update the port origins as follows:
# portmaster -o multimedia/libva-vdpau-driver multimedia/vdpau-video
or
# portupgrade -fo multimedia/libva-vdpau-driver multimedia/vdpau-video
or
# pkg set -o multimedia/vdpau-video:multimedia/libva-vdpau-driver
20121008:
AFFECTS: users of mail/squirrelmail
AUTHOR: adamw@FreeBSD.org
The locale data, including translations and associated help files,
have been moved to mail/squirrelmail-translations. If you or your
users are using Squirrelmail in anything other than en_US, you should
install that port.
20121007:
AFFECTS: users of lang/mit-scheme
AUTHOR: olgeni@FreeBSD.org
The lang/mit-scheme port was converted to OptionsNG, and now uses
the standard PGSQL knob rather than POSTGRESQL. Be sure to check
your configuration before rebuilding.
20121006:
AFFECTS: users of devel/geany-plugins
AUTHOR: makc@FreeBSD.org
devel/geany-plugins has been updated to 1.22 and split into numerous
devel/geany-plugin-* ports. geany-plugins must be deinstalled before
running any port upgrade utility.
20121002:
AFFECTS: users of devel/clanlib
AUTHOR: jhale@FreeBSD.org
devel/clanlib has been updated to 2.3.6 and the legacy version has been
moved to devel/clanlib1 and updated to 1.0.0. Although both versions
may be installed at the same time, you should update your port origins
first since many ports that depend on clanlib will not work with the
new version.
Update your port origins as follows:
# portmaster -o devel/clanlib1 devel/clanlib
or
# portupgrade -fo devel/clanlib1 devel/clanlib
or
# pkg set -o devel/clanlib:devel/clanlib1
20120928:
AFFECTS: users of mail/maildrop
AUTHOR: madpilot@FreeBSD.org
With the update to 2.6.0 of mail/maildrop the following executable
files:
bin/deliverquota -> bin/maildrop-deliverquota
bin/maidirmake -> bin/maildrop-maildirmake
have been renamed to avoid colliding with files installed from
other ports. Man pages and HTML files in DOCSDIR relating to these
files have also been renamed accordingly.
20120925:
AFFECTS: users of www/linux-f10-flashplugin11
AUTHOR: eadler@FreeBSD.org
After reinstalling the port make sure to run nspluginwrapper -v -a -u
for each user that uses the plugin.
20120924:
AFFECTS: users of textproc/aspell
AUTHOR: bapt@FreeBSD.org
textproc/aspell no longer installs the English dictionary. If you need it
please install textproc/en-aspell.
20120919:
AFFECTS: users of net-mgmt/better-cacti-templates
AUTHOR: Bryan Drewery <bdrewery@FreeBSD.org>
better-cacti-templates has been renamed as the upstream has merged
with Percona Monitoring Plugins.
Update your port origins as follows:
# portmaster -o net-mgmt/percona-monitoring-plugins net-mgmt/better-cacti-templates
or
# portupgrade -fo net-mgmt/percona-monitoring-plugins net-mgmt/better-cacti-templates
or
# pkg set -o net-mgmt/better-cacti-templates:net-mgmt/percona-monitoring-plugins
20120916:
AFFECTS: users of german/webalizer2, japanese/webalizer, polish/webalizer2, portuguese/webalizer-pt_BR, portuguese/webalizer-pt_PT, ukrainian/webalizer, www/geolizer, www/webalizer
AUTHOR: dinoex@FreeBSD.org
The default Berkeley DB has changed, so existing DNS caches needs to be
rebuild or choose the option BDB1 in the port.
20120913:
AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client
AUTHOR: rm@FreeBSD.org
If you have both sysutils/bacula-server and sysutils/bacula-client
installed, you need to pkg_delete them both prior to this update.
20120910:
AFFECTS: users of www/libxul
AUTHOR: gecko@FreeBSD.org
The www/libxul has been updated to 10.0 and the older version 1.9.2
has moved to www/libxul19.
If you want to stay with 1.9.2 please run the following command:
# portmaster -o www/libxul19 www/libxul
or
# portupgrade -o www/libxul19 www/libxul
or
# pkg set -o www/libxul:www/libxul19
20120909:
AFFECTS: users of www/testlink
AUTHOR: tota@FreeBSD.org
Testlink 1.9.4 was released. Before updating, you should read carefully
the included README file or go to www.teamst.org (Forum: TestLink 1.9.4
News, changes, etc) because this release requires a manual update of the
database scheme.
20120908:
AFFECTS: users of irc/bitlbee, irc/irssi-otr, net-im/climm, net-im/mcabber, net/kdenetwork4, security/kopete-otr, security/py-otr
AUTHOR: Doug Barton <dougb@FreeBSD.org>
The libotr library has been bumped in version 4.0.0, and the new version is
not compatible with the old. In order to make it possible for both versions
to coexist in the short term the old version has been moved to a new port.
If you are currently using pidgin-otr:
# pkg_delete -f pidgin-otr\*
Then:
# portmaster -o security/libotr3 security/libotr
# portmaster -r libotr
or
# portupgrade -o security/libotr3 security/libotr
# portupgrade -r libotr
or
# pkg set -o security/libotr:security/libotr3
20120902:
AFFECTS: users of www/apache22, www/apache22-event-mpm, www/apache22-itk-mpm, www/apache22-peruser-mpm, www/apache22-worker-mpm
AUTHOR: ohauer@FreeBSD.org
The port use now the options NG framework, this means WITH_xxx
directives are no longer valid.
Additional:
- APR only specific options like THREADS, MYSQL, PGSQL, SQLITE,
BDB and IPV6 where removed.
- PKGNAME has changed from apache-2... to apache22-2...
- PROXY is now a MULTI directive which means at last one additional
PROXY_(AJP|BALANCER|CONNECT|FTP|HTTP|SCGI) module is required.
- CGI is only a valid option for MPM prefork, peruser and itk.
20120902:
AFFECTS: users of devel/apr1
AUTHOR: ohauer@FreeBSD.org
APR was updated to 1.4.6 and APR-util was updated to 1.4.1.
Please rebuild all ports which are using functions from
APR/APR-util such as apache, subversion ...
# portmaster -r apr
or
# portupgrade -r devel/apr1
or
# pkg install -fR devel/apr1
20120902:
AFFECTS: users of math/cantor and math/kalgebra
AUTHOR: kde@FreeBSD.org
If you have both cantor and kalgebra installed, chances are that
your cantor installation is corrupted. If the file
${KDE4_PREFIX}/lib/kde4/cantor_kalgebrabackend.so is missing on
your system, rebuild cantor after updating kalgebra to 4.8.4_1 (or
later).
20120822:
AFFECTS: users of net/asterisk16, net/asterisk16-addons
AUTHOR: Florian Smeets <flo@FreeBSD.org>
asterisk16 has been unsupported upstream for a while now and has known
security vulnerabilities, therefore it was removed from the ports tree.
People still running net/asterisk16 should upgrade to net/asterisk.
First delete the asterisk addons, as they are part of asterisk now.
# pkg_delete -f asterisk16-addons\*
after that you can run one of the following
# portmaster -o net/asterisk net/asterisk16
or
# portupgrade -o net/asterisk net/asterisk16
or
# pkg set -o net/asterisk16:net/asterisk
After that you need to update your configuration. Take a look at the following
URL for the changes between 1.6 and 1.8
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE.txt
20120820:
AFFECTS: users of ports-mgmt/portupgrade-devel
AUTHOR: bdrewery@FreeBSD.org
Due to a bug introduced in 20120601, portupgrade is unable to
upgrade itself on FreeBSD 7.x. This has been fixed in 20120820.
ports-mgmt/portupgrade is not affected. To upgrade, execute the following:
# make -C /usr/ports/ports-mgmt/portupgrade-devel all deinstall install clean
20120817:
AFFECTS: users of games/unnethack
AUTHOR: knu@FreeBSD.org
The place for variable files has changed from
$PREFIX/share/unnethack to $PREFIX/var/games/unnethack. To keep
your saved files and game records, please manually move the
following files and directories to the new directory after
upgrading.
logfile
perm
record
xlogfile
bones/
level/
saves/
20120816:
AFFECTS: users of sysutils/cfengine*
AUTHOR: gjb@FreeBSD.org
The sysutils/cfengine* ports have been renamed as follows:
o sysutils/cfengine -> sysutils/cfengine22
o sysutils/cfengine3-legacy -> sysutils/cfengine32
o sysutils/cfengine3 -> sysutils/cfengine33
Users are reminded to update the port origins, for example:
# portmaster -o sysutils/cfengine22 sysutils/cfengine
or
# portupgrade -fo sysutils/cfengine22 sysutils/cfengine
or
# pkg set -o sysutils/cfengine:sysutils/cfengine22
20120815:
AFFECTS: users of lang/erlang
AUTHOR: olgeni@FreeBSD.org
The lang/erlang port was updated to R15B01. Some port options
were updated, so be sure to run "make config" in the port directory
and check your configuration before upgrading.
To upgrade Erlang and rebuild all of the dependent ports under
the new environment:
# portmaster -r erlang
or
# portupgrade -r lang/erlang
20120815:
AFFECTS: users of lang/erlang-lite
AUTHOR: olgeni@FreeBSD.org
The lang/erlang-lite port uses the same default options as
lang/erlang, which were changed some time ago.
The couchdb, rabbitmq, freeswitch-core and freeswitch-core-devel
ports have been updated to use lang/erlang rather than lang/erlang-lite.
Please check that your lang/erlang options are configured as you
wish (especially X11 support), then follow the instructions below
to update your dependencies.
# portmaster -o lang/erlang lang/erlang-lite
or
# portupgrade -fo lang/erlang erlang-lite
20120810:
AFFECTS: users of net-p2p/transmission-gtk2
AUTHOR: crees@FreeBSD.org
Unfortunately Transmission 2.61 moved the requirement for GTK to version
3.2.0, which is not yet in our tree.
Those who wish to have a graphical client can either choose transmission-qt4
in the meantime, or switch to the transmission25 ports.
A script to generate appropriate commands can be found at:
http://people.FreeBSD.org/~crees/scripts/transmission25.sh
20120808:
AFFECTS: users of www/libmicrohttpd
AUTHOR: bdrewery@FreeBSD.org
libmicrohttpd has been updated to version 0.9.21, with a shared library bump.
This requires dependent ports to be rebuilt.
# portmaster -r libmicrohttpd
or
# portupgrade -r www/libmicrohttpd
or
# pkg install -fR www/libmicrohttpd
20120804:
AFFECTS: users of graphics/libglut
AUTHOR: x11@FreeBSD.org
The libglut library is replaced by the freeglut library.
Due to shlib version bump all glut users should be rebuild.
Please follow the instructions below to upgrade.
# portmaster -o graphics/freeglut graphics/libglut
# portmaster -r freeglut
or
# env DISABLE_CONFLICTS=1 portupgrade -fo graphics/freeglut libglut\*
# portupgrade -frx freeglut freeglut
or
# pkg set -o graphics/libglut:graphics/freeglut
# pkg install -Rf graphics/freeglut
20120801:
AFFECTS: users of editors/emacs
AUTHOR: ashish@FreeBSD.org
GNU Emacs port is updated to 24.1. Emacs 23 is moved to editors/emacs23.
If you prefer to stick with Emacs 23, please specify EMACS_PORT_NAME=emacs23
in /etc/make.conf, and do:
# portmaster -o editors/emacs23 editors/emacs
or
# env DISABLE_CONFLICTS=1 portupgrade -fo editors/emacs23 editors/emacs
or
# pkg set -o editors/emacs:editors/emacs23
20120726:
AFFECTS: users of www/firefox, www/seamonkey, mail/thunderbird, www/libxul
AUTHOR: gecko@FreeBSD.org
Gecko ports were switched to use system libraries. Some of them
must be built with certain options set (default).
- graphics/png has to be installed with APNG option
- databases/sqlite3 has to be installed with SECURE_DELETE, THREADSAFE,
FTS3, UNLOCK_NOTIFY options
20120726:
AFFECTS: users of devel/pkg-config
AUTHOR: bapt@FreeBSD.org
devel/pkg-config has been replaced by devel/pkgconf
# portmaster -o devel/pkgconf devel/pkg-config
or
# portupgrade -fo devel/pkgconf pkg-config-\*
pkgng:
# pkg set -o devel/pkg-config:devel/pkgconf
# pkg install -f devel/pkgconf
20120725:
AFFECTS: users of chinese/fcitx
AUTHOR: lichray@gmail.com
The textproc/fcitx-keyboard port is merged into chinese/fcitx.
Before updating, be sure to
# pkg_delete -f fcitx-keyboard-\*
And make sure you have at least one keyboard layout based input method
enabled in fcitx-configtool, to keep the activation/deactivation of IM
panel working.
And, since chinese/fcitx-sunpinyin depends on an update to
chinese/sunpinyin
20120725:
AFFECTS: users of www/py-beautifulsoup
AUTHOR: rm@FreeBSD.org
Current www/py-beautifulsoup has been moved to www/py-beautifulsoup32,
since 4.1.1 is now current stable version.
If you prefer to stick with 3.2.0 do:
# portmaster -o www/py-beautifulsoup32 www/py-beautifulsoup
20120723:
AFFECTS: users of security/snort
AUTHOR: zi@FreeBSD.org
The database output modules have been deprecated. If you need this
functionality please look at the security/barnyard2 port.
20120723:
AFFECTS: users of graphics/ImageMagick and graphics/ImageMagick-nox11
AUTHOR: mm@FreeBSD.org
The options for ImageMagick have been changed to match commonly used
option names. If you are using a customized build, please reconfigure
your port options with "make config".
20120720:
AFFECTS: users of net/spread and net/spread4
AUTHOR: ohauer@FreeBSD.org
The ports net/spread and net/spread4 are using now the
reserved UID/GID 282 instead (user|group)next.
20120722:
AFFECTS: users of mail/mutt
AUTHOR: crees@FreeBSD.org
mail/mutt-devel has been moved to mail/mutt, since 1.5 has been around
for a while.
Should you wish to stick with version 1.4 at this time;
# portmaster -o mail/mutt14 mutt
20120721:
AFFECTS: users of audio/libogg
AUTHOR: naddy@FreeBSD.org
There is a new version of libogg (1.3.0) and the shared library version
has been bumped (ogg.7 to ogg.8). All ports that have an identifiable
direct dependency on this library have had their PORTREVISIONs bumped.
However, some ports that pull in the library indirectly may continue to
look for the old version. To ensure that all are updated, perform this
step:
# portmaster -r libogg
or
# portupgrade -rf libogg
20120717:
AFFECTS: users of ftp/proftpd
AUTHOR: mm@FreeBSD.org
The options of ProFTPD have been made much more user-friendly.
As the modules are all shared libraries, all possible modules are built
and installed. The following modules are now in separate slave ports:
databases/proftpd-mod_sql_odbc: mod_sql_odbc
databases/proftpd-mod_sql_sqlite: mod_sql_sqlite
databases/proftpd-mod_sql_tds: mod_sql_tds
net/proftpd-mod_ldap: mod_ldap and mod_quotatab_ldap
20120716:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The following port options have been reorganized:
The OPENLDAP option has been renamed to LDAP.
The MAGNET and CML options have been withdrawn in favor of new LUA option.
20120716:
AFFECTS: users of mail/postfix-current
AUTHOR: sahil@FreeBSD.org
The postscreen-to-smtpd protocol has changed. To avoid "cannot
receive connection attributes" warnings and dropped connections,
execute the command "postfix reload".
20120716:
AFFECTS: Nobody
AUTHOR: beat@FreeBSD.org
The FreeBSD ports tree switched from CVS to Subversion. A Subversion
to CVS exporter is in place to continue the support of CVSup.
20120709:
AFFECTS: users of math/metis
AUTHOR: bf@FreeBSD.org
The older version of metis has been moved to math/metis4, and
math/metis has been updated to 5.0.2. Dependent ports still use
the old API, and the different versions of metis cannot coexist, so
most users should update with:
# portmaster -o math/metis4 math/metis
# portmaster -r math/metis4
or the equivalent.
20120702:
AFFECTS: users of databases/couchdb
AUTHOR: crees@FreeBSD.org, Adam Strohl <adams-ports@ateamsystems.com>
The couchdb port has an unfortunate side effect; versions before 1.2.0
will clobber local.ini. The port will refuse to build if that file is
present and an earlier version is installed, however no such protection
can be afforded to package installation.
To upgrade from 1.1.0 and earlier, simply move PREFIX/etc/couchdb/local.ini
out of the way until the upgrade is complete.
20120702:
AFFECTS: users of net-im/mikutter
AUTHOR: tota@FreeBSD.org
The net-im/mikutter has been updated to 0.1.1.810 which is required
Ruby 1.9.2 or later. Before upgrading this port, please see the entry
20110822 in this file to upgrade Ruby to 1.9.
If you want to stay with 0.0.3 (requires Ruby 1.8.7, 1.9.2 or later),
please run the following command:
# portmaster -o net-im/mikutter003 net-im/mikutter
or
# portupgrade -o net-im/mikutter003 net-im/mikutter
20120630:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.16 is out. If you want to switch to it from, for example
lang/perl5.12, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.16):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.16 -f perl-5.12.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.16 lang/perl5.12
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
The default version for Perl has also been changed from 5.12 to 5.14.
20120623:
AFFECTS: users of sysutils/xfce4-utils
AUTHOR: xfce@FreeBSD.org
The port has been discontinued, and installs files that conflict with
the new versions of misc/xfce4-appfinder and x11-wm/xfce4-session.
# pkg_delete -f xfce4-utils-\*
# portmaster misc/xfce4-appfinder x11-wm/xfce4-session
20120618:
AFFECTS: users of databases/db5
AUTHOR: mandree@FreeBSD.org
The databases/db5 port has been upgraded to BerkeleyDB 5.3. This
entails a shared library bump.
Before upgrading this port, check if your applications use
transactional data bases, and if they do, prepare them for a log file
format upgrade. YOU MUST DO THIS BEFORE YOU UPGRADE THE DB5 PORT! See:
http://docs.oracle.com/cd/E17076_02/html/upgrading/upgrade_process.html
All packages that depend on db5 need to be rebuilt due to the shared
library version change. The full changelog is at
http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_5_3.html
To upgrade the packages that need Berkeley DB 5, please
issue one of the following commands (depending on your preferred tool):
# portmaster -r db5-5
or
# portupgrade -fr databases/db5
20120616:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The lighttpd startup script has been changed and is now compatible to the
apache startup script. The "reload" subcommand now sends a SIGHUP to the
process and triggers cycling of log files. The new command "graceful"
performs a graceful restart (similar to former "reload") and "gracefulstop"
performs a graceful stop. The "check" command has been replaced with
the "configtest" command.
20120615:
AFFECTS: users of databases/akonadi
AUTHOR: kde@FreeBSD.org
The latest Akonadi update includes critical bug fixes. Manual
intervention is required for people using local MySQL database (the
default configuration) as backend:
$ akonadictl stop
Wait a bit, and make sure that akonadiserver and akonadi_control are
not running. Kill them if needed. Then, you have two alternatives:
$ mysql_install_db --force \
--defaults-file=~/.local/share/akonadi/mysql.conf \
--datadir=~/.local/share/akonadi/db_data \
--basedir=$(dirname `dirname $(which mysql_install_db)`)
$ rm ~/.local/share/akonadi/mysql.conf
...or...
$ rm -r ~/.local/share/akonadi
In the latter case, Akonadi will have to recache your personal data
(might take a while). Akonadi is only a cache, no data will be lost.
Then:
$ akonadictl start
20120613:
AFFECTS: users of graphics/djvulibre and graphics/djvulibre-nox11
AUTHOR: bf@FreeBSD.org
DjVuLibre been updated to 3.5.25.3. The Qt 3.x GUI support that was in
graphics/djvulibre has been removed (users of this GUI should consider
switching to the new Qt 4.x GUI in graphics/djview4), and
graphics/djvulibre-nox11 has been merged back into graphics/djvulibre.
To update DjVuLibre, you can use:
# pkg_delete djvulibre-\?.\*
# portmaster -o graphics/djvulibre djvulibre-nox11
You should then update any installed ports that link to the djvulibre shared
library: converters/pdf2djvu, graphics/djview4, graphics/okular, and --
if optional djvulibre support was enabled -- graphics/ImageMagick,
graphics/apvlv, and graphics/evince.
20120612:
AFFECTS: users of databases/postgresql-libpqxx
AUTHOR: avilla@FreeBSD.org
postgresql-libpqxx has been updated to 4.0. If you want to stick
with version 3, install postgresql-libpqxx30:
# portmaster -o databases/postgresql-libpqxx30 postgresql-libpqxx
20120612:
AFFECTS: users of graphics/gdal
AUTHOR: sunpoet@FreeBSD.org
Language bindings (Perl, PHP, Python, and Ruby) were moved to separate
ports. Please install them if required. The new ports are:
Perl binding: graphics/p5-Geo-GDAL
PHP binding: graphics/php-gdal
Python binding: graphics/py-gdal
Ruby binding: graphics/ruby-gdal
20120605:
AFFECTS: users of net/p5-ZConf
AUTHOR: vvelox@vvelox.net
Please append '.set' to all sets for the FS backend. This was done to prevent
collisions between config and set names. Previously the config
"someConfig/default" would collide with the set "default" for "someConfig".
20120603:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that The Glorious Glasgow Haskell Compiler and the Haskell Platform
have been updated to versions 7.4.1 and 2012.2.0.0, respectively. At the
same time, all Haskell ports have been updated to their latest working
versions.
To follow the changes, please issue one of the following commands
(depending on the tool used):
# portmaster -r ghc
or
# portupgrade -fr lang/ghc
20120531:
AFFECTS: users of graphics/png
AUTHOR: dinoex@FreeBSD.org
The PNG library has been updated to version 1.5.10. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r png-
If you use portupgrade:
portupgrade -fr graphics/png
20120531:
AFFECTS: users of editors/koffice-kde4
AUTHOR: kde@FreeBSD.org
KOffice 2 has been replaced by Calligra. You are encouraged to
deinstall any KOffice port and install equivalent Calligra ones:
# pkg_delete \*koffice\*
# portmaster editors/calligra <additional l10n ports>
20120530:
AFFECTS: users of databases/postgresql*-server
AUTHOR: jgh@FreeBSD.org
Affected users are those who use the crypt(text, text) function with
DES encryption in the optional pg_crypto module. Passwords affected
are those that contain characters that cannot be represented with
7-bit ASCII. If a password contains a character that has the most
significant bit set (0x80), and DES encryption is used, that character
and all characters after it will be ignored.
20120530:
AFFECTS: users of net/nss-pam-ldapd
AUTHOR: scheidell@FreeBSD.org
The net/nss-pam-ldapd port no longer provides an option for SASL. This has
been sourced out to the new net/nss-pam-ldapd-sasl port, to accommodate
users using packages (see ports/162240). Users with openldap-sasl-client
installed are encouraged to change the port's origin to:
net/nss-pam-ldapd-sasl using their favorite ports management tool.
Example for portmaster:
portmaster -o net/nss-pam-ldapd-sasl nss-pam-ldapd
20120527:
AFFECTS: users of x11-toolkits/qt4-gui
AUTHOR: kde@FreeBSD.org
Qt started using the raster graphics system engine, which relies on
shared memory. Be sure to check pkg-message.
20120525:
AFFECTS: users of deskutils/kdepim4, deskutils/kdepim4-runtime
AUTHOR: kde@FreeBSD.org
kdepim4 has been updated to 4.8.3. For those who prefer old
kdepim-4.4.11.1 deskutils/kdepim44* ports have been added.
To stay with kdepim-4.4.11.1 run the following commands:
# portmaster -o deskutils/kdepim44-runtime kdepim-runtime-4\*
# portmaster -o deskutils/kdepim44 kdepim-4\*
20120525:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.8.3. Several ports were split,
thus manual intervention into update procedure is required:
# pkg_delete -f kde-runtime-\* ruby\*-kdebindings-korundum\* \
kalgebra-4\* kdeaccessibility-4\* kdeutils-4\* kde-baseapps-\* \
plasma-applet-icontasks\*
# portmaster -a
20120518:
AFFECTS: users of dns/poweradmin
AUTHOR: Edmondas Girkantas <eg@fbsd.lt>
Some database changes have been made between version 2.1.4 and 2.1.5,
upgrading needs to be done manually by running the following SQL:
For MySQL users:
ALTER TABLE `zones` ADD `zone_templ_id` INT( 11 ) NOT NULL;
ALTER TABLE zones ENGINE = InnoDB;
ALTER TABLE zone_templ ENGINE = InnoDB;
ALTER TABLE zone_templ_records ENGINE = InnoDB;
For PostgreSQL users:
ALTER TABLE zones ADD zone_templ_id INT DEFAULT NULL;
Source: https://www.poweradmin.org/trac/wiki/ReleaseNotes/2.1.5
20120516:
AFFECTS: users of lang/php5
AUTHOR: ale@FreeBSD.org
PHP has been updated to 5.4. Suhosin patch has been disabled until the
new version will be released (soon). Suhosing extension will take more
time. LINKTHR option is now enabled by default, be sure to flag it if
you are updating using an old saved configuration. sqlite2 extension
has been permanently removed.
If you want to remain at PHP 5.3, a new port (lang/php53) has been
created for such purpose.
20120513:
AFFECTS: users of net-mgmt/smokeping
AUTHOR: lth@FreeBSD.org
Smokeping has been updated to 2.6.7, and the web server configuration
has changed. FastCGI is now preferred. Please check the documentation
that your web server configuration is OK.
20120512:
AFFECTS: users of textproc/p5-XML-SAX
AUTHOR: crees@FreeBSD.org
p5-XML-SAX (X-S) was split into p5-XML-SAX-Base (X-S-B) and p5-XML-SAX for
version 0.99. Since X-S-B now installs some files formerly installed by X-S
the package for X-S must be deinstalled before updating X-S.
# pkg_delete -fx p5-XML-SAX
# portmaster textproc/p5-XML-SAX
(users of pkgng can substitute pkg_delete with pkg delete)
20120511:
AFFECTS: users of graphics/xpdf
AUTHOR: cy@FreeBSD.org
In order to allow graphics/xpdf and graphics/poppler-utils to coexist,
graphics/xpdf binaries have been moved from ${LOCALBASE}/bin to
${LOCALBASE}/lib/xpdf. The symlink ${LOCALBASE}/bin/xpdf points to
${LOCALBASE}/lib/xpdf/xpdf. However the other utilities installed by
the xpdf port conflict with poppler-utils, no symlinks are maintained.
Applicaions and scripts which use the pdf* utilities provided by
graphics/xpdf must reference them using their new location, specify
${LOCALBASE}/lib/xpdf in $PATH, or use the same utilities provided by
graphics/poppler-utils.
20120510:
AFFECTS: users of devel/gitolite
AUTHOR: milki@rescomp.berkeley.edu
gitolite has been split into two ports: devel/gitolite for 3.x and
devel/gitolite2 for 2.x
gitolite 3.x is NOT "API" compatible with gitolite 2.x and requires
additional manual migration steps which can be found in the online
documentation.
http://sitaramc.github.com/gitolite/install.html#migr
Current users wishing to continue using gitolite 2.x should run:
# portmaster -o devel/gitolite2 gitolite
or
# portupgrade -o devel/gitolite2 gitolite
20120508:
AFFECTS: users of www/node and www/node-devel
AUTHOR: sunpoet@FreeBSD.org
npm is a package manager for node. Starting with node 0.6.17 (www/node) and
node 0.7.8 (www/node-devel), we do not install bundled npm but provide a
separate port (www/npm). Please install www/npm if you need it.
20120430:
AFFECTS: users of www/py-google-api-python-client
AUTHOR: nivit@FreeBSD.org
The port has been updated to 1.0.b8. This new version has important
changes which might break your code:
* apiclient.anyjson has moved to oauth2client.anyjson.
* Some calls, for example, taskqueue().lease() used to require
a parameter named body. In this new release only methods that
really need to send a body require a body parameter, and so
you may get errors about an unknown 'body' parameter in your call.
The solution is to remove the unneeded body={} parameter
See http://code.google.com/p/google-api-python-client/wiki/PyDoc for
more information.
20120426:
AFFECTS: users of editors/libreoffice
AUTHOR: bapt@FreeBSD.org
LOCALIZED_LANG option has gone, localized packages are now available
separately, you can also use editors/libreoffice-i18n to pick the
localization you want.
20120425:
AFFECTS: users of mail/postfix, mail/postfix2[6-8]
AUTHOR: sahil@FreeBSD.org
The latest update to these ports adds support to turn off
the TLSv1.1 and TLSv1.2 protocols introduced in OpenSSL 1.0.1.
These protocols are known to cause inter-operability issues
with certain services, e.g. hotmail. If using TLS with Postfix,
please consult the RELEASE_NOTES for information about possible
workarounds.
20120423:
AFFECTS: users of astro/boinc-astropulse
AUTHOR: rene@FreeBSD.org
Astropulse has been updated to 6.01, which is a different application
than version 5.06. You need to have Astropulse v6 enabled in your
account under SETI@home preferences. It is also advisable to finish
and report existing Astropulse units before updating.
20120421:
AFFECTS: users of x11/xorg
AUTHOR: x11@FreeBSD.org
The default mesa has been updated to 7.6.1 and the default xorg-server
to 1.7.7.
A switch is available for people that want to use mesa 7.11.x and
xorg-server 1.10.6. This requires an nvidia card or Intel+KMS support.
If you have an intel card and can try these experimental KMS support
patches:
10/head with a patch: http://people.freebsd.org/~kib/drm/
FreeBSD stable/9 and releng/9.0:
http://lists.freebsd.org/pipermail/freebsd-x11/2012-April/011640.html
20120419:
AFFECTS: users of security/openssl
AUTHOR: dinoex@FreeBSD.org
The OpenSSL port has been updated to 1.0.1a. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r openssl
Or, if you would prefer a more gradual approach:
portmaster -w openssl (check the man page for more information)
If you use portupgrade:
portupgrade -fr security/openssl
20120418:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.3 released.
20120418:
AFFECTS: users of www/firefox and mail/thunderbird
AUTHOR: gecko@FreeBSD.org
Firefox and Thunderbird have been updated to 11.0. If you want to
stay with the Extended Support Release please use the new -esr
ports.
Firefox:
# portupgrade -o www/firefox-esr www/firefox
# portupgrade -o www/firefox-esr-i18n www/firefox-i18n (if installed)
or
# portmaster -o www/firefox-esr www/firefox
# portmaster -o www/firefox-esr-i18n www/firefox-i18n (if installed)
Thunderbird:
# portupgrade -o mail/thunderbird-esr mail/thunderbird
# portupgrade -o mail/thunderbird-esr-i18n \
mail/thunderbird-i18n (if installed)
or
# portmaster -o mail/thunderbird-esr mail/thunderbird
# portmaster -o mail/thunderbird-esr-i18n \
mail/thunderbird-i18n (if installed)
20120418:
AFFECTS: users of www/chpasswd
AUTHOR: madpilot@FreeBSD.org
Previous version of the chpasswd port put the configuration file
in the pkg-plist, causing it to be removed on deinstall.
Users are advised to make a backup copy of the configuration file
before upgrading. This has been fixed and will not happen anymore
in future updates.
20120415:
AFFECTS: users of irc/ircd-ratbox
AUTHOR: scheidell@FreeBSD.org
Ircd-ratbox has been updated to follow the current stable release
branch (3.0.x). All previous branches are no longer supported by the
ratbox team.
Users of ircd-ratbox are advised to create new ircd configuration
files based on the examples provided.
20120404:
AFFECTS: users of net-mgmt/net-snmp
AUTHOR: zi@FreeBSD.org
The net-snmp startup script now specifies a new pid_file to avoid a
conflict that existed with bsnmpd. As a result, the startup script
cannot find currently running versions of snmpd.
You will need to either stop the daemon before upgrading or locate the
PID of snmpd and manually kill it after upgrade. Then, start the daemon
as you normally would.
20120326:
AFFECTS: users of www/tomcat7
AUTHOR: ale@FreeBSD.org
Tomcat 7 startup script now uses 'jsvc' to monitor the daemon's process.
A few rc.conf variables has been changed, be sure to adapt your
configuration, if needed.
20120318:
AFFECTS: users of mail/dbmail
AUTHOR: rm@FreeBSD.org
dbmail 3.0 is now available.
There are a number of significant changes including Dependencies,
Config, Schema and Server changes.
Without required modifications, dbmail will not run and you will
no longer have access to your emails. See UPGRADING for details.
Don't forget to backup and fully test before upgrading.
To stick with version 2.2.x run:
# portupgrade -o mail/dbmail22 mail/dbmail
or
# portmaster -o mail/dbmail22 mail/dbmail
20120313:
AFFECTS: users of x11-toolkits/qt4-gui
AUTHOR: kde@FreeBSD.org
MIT-SHM problem (blank windows in Marble and KDE-Games) has been
fixed, kern.ipc.shm_allow_removed=1 is not needed anymore to
workaround it.
20120311:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: linimon@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been restored from the Attic
in order to give a FreeBSD-style deprecation cycle. However, users
are advised to upgrade to perl5.12 as soon as feasible.
20120308:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: pgollucci@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been removed since they've
been EOL upstream for 3yrs and 2yrs respectively. The default
of lang/perl5.12 has not changed (yet). Conditional checks for
perl < 5.12 have been removed. UNLESS you have PERL_VERSION=5.8.x
or PERL_VERSION=5.10.x in /etc/make.conf you need take no action.
If you do, you will have to recompile all perl dependant ports after
updating your ports tree. Please see entry 20110517 for help.
20120225:
AFFECTS: users of archivers/libarchive
AUTHOR: glewis@FreeBSD.org
libarchive has been updated to version 3.0.3, with a shared library bump.
This requires dependent ports to be rebuilt.
# portmaster -r libarchive
or
# portupgrade -r archivers/libarchive
20120221:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: decke@FreeBSD.org
virtualbox-ose has been updated to 4.1.8 and requires the latest
devel/kBuild-devel now. It is only a build dependency so it is safe
to remove it before updating.
# pkg_delete -f kBuild-\*
20120220:
AFFECTS: users of graphics/libungif
AUTHOR: dinoex@FreeBSD.org
libungif is obsolete, please deinstall it and rebuild all ports using
it with graphics/giflib.
# portmaster -o graphics/giflib graphics/libungif
# portmaster -r giflib
or
# portupgrade -o graphics/giflib graphics/libungif
# portupgrade -rf giflib
20120216:
AFFECTS: users of multimedia/libvpx
AUTHOR: ashish@FreeBSD.org
libvpx has been updated to version 1.0.0, with a shared library bump.
This requires dependencies to be rebuilt.
# portmaster -r libvpx
or
# portupgrade -r multimedia/libvpx
20120214:
AFFECTS: users of net/libexosip2
AUTHOR: jgh@FreeBSD.org
libexosip2 has been updated with a shared library bump.
This requires dependencies to be rebuilt.
# portmaster -r libexosip2
or
# portupgrade -rf libexosip2-3.\*
20120214:
AFFECTS: users of devel/pcre
AUTHOR: dougb@FreeBSD.org
Until all dependent ports have been updated you should update pcre in
a manner that will preserve its old shared library. For example:
# portmaster -w devel/pcre
or
# portupgrade devel/pcre
20120213:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: pgj@FreeBSD.org
GHC has been updated to version 7.0.4, and Haskell Platform to version
2011.4.0.0, and other Haskell ports are also updated to their Haskell
Platform versions or latest versions.
To update all affected ports:
# portmaster -r lang/ghc
or
# portupgrade -r lang/ghc
20120210:
AFFECTS: users of mail/postfix
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
Postfix 2.9.0 contains several major changes, some of which could
result in incompatible or unexpected behavior. Regardless of the
version from which you are upgrading, please carefully review the
RELEASE_NOTES before proceeding.
20120126:
AFFECTS: users of ftp/proftpd and ftp/proftpd-mysql
AUTHOR: Martin Matuska <mm@FreeBSD.org>
The proftpd port has been updated to 1.3.4 and changed to use
dynamically loadable modules. Please add corresponding LoadModule
directives to your configuration file, like in the following example:
LoadModule mod_tls.c
The modules mod_sql_mysql and mod_sql_postgres are now outside of the
main proftpd port:
databases/proftpd-mod_sql_mysql
databases/proftpd-mod_sql_postgres
The proftpd-mysql port has been removed, use the alternative port:
databases/proftpd-mod_sql_mysql
20120121:
AFFECTS: users of multimedia/vdr
AUTHOR: Juergen Lock <nox@FreeBSD.org>
The vdr ports have been updated to 1.7.22 which involves at least
two changes:
- svdrpsend.pl is now called svdrpsend.
- The ttxtsubs channels.conf format has changed so if you use that
plugin you need to edit /usr/local/etc/vdr/channels.conf for the
channels you want to receive teletext subtitles on - see:
/usr/local/share/doc/vdr-plugin-ttxtsubs/HISTORY
20120116:
AFFECTS: users of mail/postfix-current
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
From the upstream RELEASE_NOTES:
Instead of terminating immediately with a "fatal" message when a
database file can't be opened, a Postfix daemon program now logs
an "error" message, and continues execution with reduced
functionality.
Specify "daemon_table_open_error_is_fatal = yes" to get the
historical behavior (immediate termination with "fatal" message).
Logfile-based alerting systems may need to be updated to look for
"error" messages in addition to "fatal" messages.
By default the Postfix SMTP server no longer reports transcripts
of sessions where a client command is rejected because a table is
unavailable. To receive such reports, add the new "data" class to
the notify_classes parameter value. The reports will be sent to the
error_notice_recipient address as before. This class is also used
by the Postfix SMTP client to report about sessions that fail
because a table is unavailable.
20120116:
AFFECTS: users of x11/xcb-util
AUTHOR: garga@FreeBSD.org
x11/xcb-util was updated to 0.3.8 and was split in new modules.
Dependencies were adjusted but main port symbols were moved to a single
library, xcb-util.so. For this reason, all dependent ports must be
recompiled.If you use portmaster, run:
# portmaster -R -r xcb-util-0
Or for portupgrade:
# portupgrade -r xcb-util-0\*
20120112:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 9.0 released.
20120109:
AFFECTS: users of www/p5-WWW-GitHub-Gist
AUTHOR: lbr@FreeBSD.org
gist command was moved into new www/p5-App-gist port.
20120109:
AFFECTS: ports using Apache Software License 2.0
AUTHOR: tabthorpe@FreeBSD.org
The correct acronym for Apache Software License 2.0 is really AL2.
20120109:
AFFECTS: users of graphics/inkscape:
AUTHOR: bsam@FreeBSD.org
Before updating graphics/inkscape to version 0.48.2 one should deinstall
the port graphics/libwpg01.
20120108:
AFFECTS: users of devel/p5-CPAN-Meta and devel/p5-Version-Requirements
AUTHOR: sunpoet@FreeBSD.org
Author of Version::Requirements (devel/p5-Version-Requirements) merged
its function to CPAN::Meta::Requirements (part of devel/p5-CPAN-Meta).
As a result, devel/p5-Version-Requirements is marked DEPRECATED.
Please run the following commands to update p5-CPAN-Meta and remove
p5-Version-Requirements:
# portmaster -o devel/p5-CPAN-Meta devel/p5-Version-Requirements
# pkg_delete p5-Version-Requirements-\*
20120104:
AFFECTS: users of devel/thrift, py-thrift, php5-thrift, p5-thrift
AUTHOR: scheidell@FreeBSD.org
Users upgrading thrift from 0.6.1, please take note: library structure
and versions have changed, and are not compatible with 0.7.0+
20111231:
AFFECTS: users of lang/newlisp
AUTHOR: olgeni@FreeBSD.org
In lang/newlisp, the MYSQL5 and MYSQL51 options have been unified into
MYSQL, which will pick the correct MySQL version using the standard
MySQL selection logic. MySQL users will have to run "make config" and
select the MYSQL option.
Tinderbox users will have to update their options files with the new
MYSQL option, and possibly change their Tinderbox environment to select
a specific MySQL version.
20111229:
AFFECTS: users of ftp/proftpd{-devel,-mysql}
AUTHORS: delphij@FreeBSD.org, mm@FreeBSD.org
Due to the nature of the way FreeBSD-SA-11:07.chroot is implemented,
users have to update to latest -STABLE, -CURRENT, or supported
security branch to use the chroot functionality in these ports.
Please see the security advisory for more details.
20111219:
AFFECTS: users of lang/perl5.14
AUTHOR: skv@FreeBSD.org
lang/perl5.14 has been updated to 5.14.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.14.
Please see its manual page for details.
If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
follow instructions in the entry 20110517 in this file.
20111205:
AFFECTS: users of ruby-gnome ports
AUTHOR: swills@FreeBSD.org
ruby-gnome has been updated to 1.0.3. Some of them have been removed
since they are no longer included upstream. The meta port is
now x11/ruby-gnome2. To update run the following command:
# portmaster -o x11/ruby-gnome2 x11/ruby-gnome2-all
You may also wish to remove the old ports using:
# portmaster -s
20111130:
AFFECTS: users of dns/nsd
AUTHOR: zi@FreeBSD.org
The database format of nsd.db has changed as of version 3.2.9.
Before you run nsd, you must convert the existing database:
# nsdc rebuild
20111123:
AFFECTS: users of net-im/kopete or net-im/libjingle
AUTHOR: kde@FreeBSD.org
kopete and libjingle are now depending on a newer oRTP from
linphone-base. To correctly switch to the new port, you need to deinstall
ortp prior to the update:
# pkg_delete -f ortp-\*
20111123:
AFFECTS: users of databases/redis
AUTHOR: osa@FreeBSD.org
The redis configuration file, redis.conf, have been changed, some options
removed in newer versions (>=2.4). In some cases, redis-server with
older configuration might does not run at startup.
If you run into startup problems, re-edit configuration file.
20111101:
AFFECTS: users of x11/kde4-workspace
AUTHOR: kde@FreeBSD.org
If your KDM fails with the message
'X server "/usr/bin/X" cannot be executed'
you need to delete its configuration file and restart it:
# rm /usr/local/kde4/share/config/kdm/kdmrc
# service kdm4 restart
20111101:
AFFECTS: users of graphics/poppler-gtk
AUTHOR: Koop Mast <kwm@FreeBSD.org>
Poppler was update to 0.18.0, and the gtk slave port was renamed to
match the library it installs. Please run the following command to migrate.
# portmaster -o graphics/poppler-glib poppler-gtk-0.16.7
20111031:
AFFECTS: users of textproc/py-creole
AUTHOR: Stanislav Svirid <count@211.ru>
Some API is changed: replace 'parser_kwargs' and 'emitter_kwargs'
with separate arguments. More information on new API:
http://code.google.com/p/python-creole/wiki/API
20111025:
AFFECTS: users of print/flpsed or www/dillo2
AUTHOR: bf@FreeBSD.org
The new versions of flpsed and dillo have switched from
x11-toolkits/fltk2 to the new fltk 1.3.0 from x11-toolkits/fltk.
Users who have customizations specific to fltk2 may need to consult
the fltk 1.3 documents in order to adjust their local settings. For
dillo, some commonly-used key bindings have changed, and new
configuration options are available: consult dillorc.dist and
keysrc.dist for details.
20111019:
AFFECTS: users of mail/thunderbird or www/seamonkey with lightning
plugin installed.
AUTHOR: gecko@FreeBSD.org
To get an up to date version of lightning you should use the new
LIGHTNING option in mail/thunderbird or www/seamonkey. This option
is not enabled by default so you have to run "make config" prior
to the build. The old deskutils/lightning-thunderbird and
deskutils/lightning ports should no longer be used and will be
removed very soon.
Like other XPIs ports, lightning now registers itself as a global
extension and doesn't create the XPI to be installed manually.
Upgrading users should remove lightning from their profile before
installing Thunderbird or SeaMonkey the first time with the new
LIGHTNING option enabled.
20111018:
AFFECTS: users of mail/postfix-current
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
The default smtp_address_preference value is now "any" instead
of "ipv6", meaning choose randomly between IPv6 and IPv4. With
this the Postfix SMTP client will have more success delivering
mail to sites that have problematic IPv6 configurations.
20111016:
AFFECTS: users of devel/p5-subversion-freebsd
AUTHOR: wxs@FreeBSD.org
devel/p5-subversion-freebsd has been removed as it is no longer necessary.
If you have it installed please run the following to switch to
devel/p5-subversion:
portmaster -o devel/p5-subversion p5-subversion-freebsd
Please also see the second entry below (20111016) if haven't upgraded
subversion yet.
20111016:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC has been updated to 4.7.2. A number of files were moved between
packages and several ports were split, thus manual intervention into
update procedure is required:
# pkg_delete -f raptor-1\* kdelibs-4\* kdebase-\*4\* \
kdeaccessibility-4\* kdeedu-4\* kdegames-4\* kdegraphics-4\* \
kdesdk-4\* kdeutils-4\* konq-plugins-4\* ktts\* nepomukcontroller\* \
ruby\*-kdebindings\* kdebindings-smoke\*
# pkg_delete -f kdehier4\*
# mv /usr/local/kde4/etc/pam.d/* \
/usr/local/etc/pam.d/
# mv /usr/local/kde4/etc/rc.d/* \
/usr/local/etc/rc.d/
# mv /usr/local/kde4/share/dbus-1/services/* \
/usr/local/share/dbus-1/services/
# mv /usr/local/kde4/share/dbus-1/system-services/* \
/usr/local/share/dbus-1/system-services/
# rmdir /usr/local/kde4/etc/pam.d /usr/local/kde4/etc/rc.d \
/usr/local/kde4/share/dbus-1/*services
# rm -r /var/tmp/kdecache-*
# portmaster misc/kdehier4
If you have - or plan to install - net/kdenetwork4, also run:
# portmaster -o net/linphone-base ortp
Finally:
# portmaster -a
Also, remove /usr/local/kde4/etc/rc.d from local_startup in rc.conf(5).
Failure to do this will cause all enabled scripts in /usr/local/etc/rc.d
to be started twice.
Remember to check for missing ports, bearing in mind that x11/kdebase4*
ports were replaced by x11/kde4-* ones, ktts was replaced by jovie, while
konq-plugins-kde4 and nepomukcontroller were removed. Then:
# portmaster --check-depends
You're also encouraged to run `pkg_cutleaves` or similar to check for
orphaned ports.
Please, note that `pkg_add -r kde4` will not install Plasma scriptengines
and printer utilities by default anymore, and `pkg_add -r kdegames4` will
not install Kajongg. This was made to avoid depending by default on
kdebindings.
20111016:
AFFECTS: users of devel/subversion, devel/subversion-freebsd,
devel/p5-subversion, devel/py-subversion,
devel/ruby-subversion and java/subversion-java and
all dependand ports.
AUTHOR: Lev Serebryakov <lev@FreeBSD.org>
Subversion was updated to version 1.7.0 and port was reworked.
Now there is no "devel/subversion-freebsd" port. All FreeBSD-specific patches
are incorporated into main subversion port as options, which are turned ON by
default.
These options are:
P4_STYLE_MARKERS -- change conflict markers to P4 style,
established for FreeBSD projects.
This is not mandatory for working with
FreeBSD sources.
ENHANCED_KEYWORD -- Support for custom keywords, like
$ FreeBSD $ in sources.
This is MANDATORY for working with
FreeBSD sources.
FREEBSD_TEMPLATE -- Standard FreeBSD commit template.
It is RECOMMENDED for working with
FreeBSD sources.
Also, subversion 1.7.0 changes the working copy format,
and a working copy cannot be shared between
subversion 1.7.0 and 1.6.x. Please, think twice before
upgrading.
Additional the port "devel/subversion16" was created to
support subversion 1.6.x. Subversion 1.7.x and 1.6.x
cannot be installed simultaneously!
Binding ports can be built with Subversion 1.7.0 (Default)
or with Subversion 1.6.x. To build bindings with subversion 1.6.x
you should set variable WITH_SUBVERSION_VER to "16".
There are several ways to upgrade, depending on what you used
before and what you want to get after upgrade.
(a) You use devel/subversion without FreeBSD patches and, maybe,
some bindings. You want fresh'n'new subversion 1.7.0.
Please, run:
# cd /usr/ports/devel/subversion && make config
<deselect first three options described above, if you want it>
# portupgrade -r devel/subversion
or
# portmaster -R -r subversion-1.6
(b) You use devel/subversion-freebsd and, maybe, some
bindings. You want fresh'n'new subversion 1.7.0, again
with FreeBSD patches.
Please, run:
# cd /usr/ports/devel/subversion && make config
<make sure that first three options are selected>
# portupgrade -o devel/subversion devel/subversion-freebsd
# portupgrade -r devel/subversion
or
# portmaster -o devel/subversion devel/subversion-freebsd
# portmaster -R -r subversion-1.7
(c) You use devel/subversion without FreeBSD patches and, maybe,
some bindings. You want good old subversion 1.6.x, again
without again.
Please, run:
# cd /usr/ports/devel/subversion16 && make config
<deselect first three options described above, if you want it>
# portupgrade -o devel/subversion16 devel/subversion
# portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
or
# portmaster -o devel/subversion16 devel/subversion
# portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
(d) You use devel/subversion-freebsd and, maybe, some bindings.
You want good old subversion 1.6.x, with FreeBSD patches.
Please, run:
# cd /usr/ports/devel/subversion16 && make config
<make sure, that first three options are selected>
# portupgrade -o devel/subversion16 devel/subversion-freebsd
# portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
or
# portmaster -o devel/subversion16 devel/subversion-freebsd
# portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
20111005:
AFFECTS: users of lang/erlang
AUTHOR: Jimmy Olgeni <olgeni@FreeBSD.org>
Following the R14B04 upgrade the JAVA, X11, WX and ODBC port
options have been set to OFF by default; this will allow to replace
lang/erlang-lite with lang/erlang for headless operation in the
near future.
If you need any of these options, run "make config" in lang/erlang
before upgrading, or set your make.conf accordingly.
20111003:
AFFECTS: users of math/qhull
AUTHOR: Stephen Montgomery-Smith <stephen@FreeBSD.org>
The port math/qhull has been moved to math/qhull5, and math/qhull has been
updated to a version that is incompatible with all ports previously using
math/qhull. If you are upgrading a port that has math/qhull as a dependency,
please delete the port math/qhull first, so that math/qhull5 is properly
made as a dependency.
20110929:
AFFECTS: users of net/py-zope.proxy, devel/py-zope.testing and
devel/py-zope.interface
AUTHOR: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Several Zope ports have been renamed for consistency with their
upstream distributions. Please run the following commands to update
your local installations:
If you use portmaster run:
# portmaster -o devel/py-zope.interface devel/py-zopeInterface
# portmaster -o net/py-zope.proxy net/py-zopeproxy
# portmaster -o devel/py-zope.testing devel/py-zopetesting
If you use portupgrade run:
# portupgrade -o devel/py-zope.interface devel/py-zopeInterface
# portupgrade -o net/py-zope.proxy net/py-zopeproxy
# portupgrade -o devel/py-zope.testing devel/py-zopetesting
20110928:
AFFECTS: users of 10-current
AUTHOR: eadler@FreeBSD.org
There are known issues installing ports on FreeBSD 10+ due to
bogus assumptions by various build scripts. This will not be fixed
until 9-RELEASE is released.
There are two workarounds:
1) Set UNAME_r=9.9-CURRENT in your environment
2) Set REVISION="9.9" in ${SRCDIR}/sys/conf/newvers.sh
20110928:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.org
Note: 1.1.4 release introduces several API changes which may affect
third-party modules.
20110925:
AFFECTS: users of lang/python*
AUTHOR: lwhsu@FreeBSD.org
The HUGE_STACK_SIZE option has been removed, now Python will use default
thread stack size of the system. If you want to change it, specify it
with -DTHREAD_STACK_SIZE=<size> in CFLAGS.
20110925:
AFFECTS: users of net/openldap*
AUTHOR: ume@FreeBSD.org
The security/cyrus-sasl2 was updated to 2.1.25. If the SASL option
is enabled (disabled by default), net/openldap* must be recompiled
after upgrading cyrus-sasl2.
20110921:
AFFECTS: users of devel/maven2 and devel/maven3
AUTHOR: hq@FreeBSD.org
The devel/maven2 and devel/maven3 now rely on a wrapper port:
devel/maven-wrapper. If you plan to upgrade the devel/maven[23] ports, you
will have to uninstall all of them before reinstalling them.
20110917:
AFFECTS: users of misc/tvbrowser
AUTHOR: lme@FreeBSD.org
From version 3.0.2 on TV-Browser doesn't include any plugins any longer. You
are supposed to download the plugins manually, this also means that you need
to download the appropriate channel sources plugin for your country. After
installing it your previously configured channels are visible again. To do so,
select "Tools -> Install / Update Plugins..." and choose the plugins you need.
20110915:
AFFECTS: users of dns/unbound
AUTHOR: sem@FreeBSD.org
unbound supports GOST from version 1.4.12 but only if dns/ldns was build
with GOST support too. There is no way to check the option when unbound
builds, so you should make sure the option is on in both unbound and lds.
20110914:
AFFECTS: users of www/asterisk-stat
AUTHOR: flo@FreeBSD.org
asterisk-stat depends on asterisk16 now, you will need to update asterisk
and asterisk-addons to 1.6. Instructions on upgrading your configuration
files are here:
http://svnview.digium.com/svn/asterisk/branches/1.6.2/UPGRADE-1.6.txt
If you use portmaster run:
# portmaster -o net/asterisk16 net/asterisk14
# portmaster -o net/asterisk16-addons net/asterisk14-addons
If you use portupgrade run:
# portupgrade -o net/asterisk16 net/asterisk14
# portupgrade -o net/asterisk16-addons net/asterisk14-addons
20110909:
AFFECTS: users of net/p5-SOAP-Lite
AUTHOR: az@FreeBSD.org
SOAP::Transport::TCP is not a part of net/p5-SOAP-Lite
distribution since version 0.714. If you need SOAP::Transport::TCP
you should install net/p5-SOAP-Transport-TCP manually.
20110901:
AFFECTS: users of databases/db51
AUTHOR: mandree@FreeBSD.org
The databases/db51 port (Oracle Berkeley DB version 5.1) has been
removed. Version 5.2 of the package is available in databases/db5.
Users of ports that depend on the removed 5.1 versions are advised
to rebuild the affected ports.
20110830:
AFFECTS: users of lang/racket
AUTHOR: olgeni@FreeBSD.org
Racket has been upgraded to version 5.1.3. Due to the recent rewrite of
the Racket graphics handling code, it is no longer possible to build
this port without X11.
The WITHOUT_X11 switch now controls if X11 is brought in as
USE_GNOME/LIB_DEPENDS or BUILD_DEPENDS.
In the latter case you will be able to build a Racket package that can
then be deployed on a headless server.
20110829:
AFFECTS: users of security/maia
AUTHOR: Janky Jay, III <ek@purplehat.org>
There have been many changes to the maia port, including renaming the rc
script and variables from maia to maiad. You will need to replace any
instances of maia with maiad in /etc/rc.conf, as well as renaming /var/amavisd
to /var/maiad. The 'vscan' user's home directory also needs to be changed to
/var/maiad.
These can be done by:
# mv /var/amavisd /var/maiad
# sed -i.bak -e "s/^maia_/maiad_/" /etc/rc.conf
# pw usermod vscan -d /var/maiad
20110828:
AFFECTS: users of print/cups-{base,client,image}
AUTHOR: sahil@FreeBSD.org
During the update to 1.4.8, the GNUTLS option was changed from ON to
OFF by default. Because old configuration options are saved, users
should re-run 'make config' and explicitly deselect the GNUTLS option
before upgrading.
20110823:
AFFECTS: users of lang/ruby
AUTHOR: swills@FreeBSD.org
The default ruby version has been reverted from 1.9 to 1.8. If you followed
the procedure in the 20110822 entry, you may need to follow these steps:
If you use portmaster:
# portmaster -o lang/ruby18 lang/ruby19
# portmaster -R -r ruby-1.8
If you use portupgrade:
# portupgrade -f lang/ruby19
# portupgrade -f lang/ruby18 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.9.\* -fr lang/ruby19
If you wish to keep the 1.9 version as default, add the following lines
to your /etc/make.conf file:
#
# Keep ruby 1.9 as default version.
#
RUBY_DEFAULT_VER=1.9
20110823:
AFFECTS: users of devel/libnotify and net/libproxy
AUTHOR: gnome@FreeBSD.org
libnotify and libproxy are updated with shared library bumps.
This requires dependancies to be rebuild.
# portmaster -r libnotify-0
# portmaster -r libproxy-0
# portmaster -a
or
# portupgrade -rf libnotify-0.\* libproxy-0.\*
# portupgrade -aR
20110822:
AFFECTS: users of lang/ruby
AUTHOR: stas@FreeBSD.org
The default ruby version has been updated to 1.9. Please rebuild all ports that
depends on it.
If you use portmaster:
# portmaster -o lang/ruby19 lang/ruby18
# portmaster -R -r ruby-1.9
If you use portupgrade:
# portupgrade -f lang/ruby18
# portupgrade -f lang/ruby19 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.8.\* -fr lang/ruby18
After these steps are complete, you can pkg_delete ruby 1.8 if you
no longer need it.
If you wish to keep the 1.8 version as default, add the following lines
to your /etc/make.conf file, and rebuild lang/ruby18 after that.
#
# Keep ruby 1.8 as default version.
#
RUBY_DEFAULT_VER=1.8
20110822:
AFFECTS: users of graphics/opencv
AUTHOR: mm@FreeBSD.org
OpenCV python module was moved to own port: graphics/py-opencv
20110820:
AFFECTS: users of www/apache* and depending ports
AUTHOR: ohauer@FreeBSD.org
The default apache version changed from www/apache13 to www/apache22.
Users who will continue with apache13 should create the following entry
in /etc/make.conf
APACHE_PORT= www/apache13
20110818:
AFFECTS: users of mail/enigmail-* ports
AUTHOR: ale@FreeBSD.org
Like other XPIs ports, enigmail now registers itself as a global
extension and doesn't create the XPI to be installed manually.
Upgrading users should remove enigmail from their profile before
installing the new port.
20110815:
AFFECTS: users of sysutils/swapexd
AUTHOR: crees@FreeBSD.org
swapexd used to clobber its config file on deinstall, unfortunately this will
not be fixed in installed packages. Back up your config before updating, or
you will lose it!
# cp /usr/local/etc/swapexd/swapexd.conf ~/swapexd.conf.bak
20110808:
AFFECTS: users of net-mgmt/zenoss
AUTHOR: pphillips@experts-exchange.com
Some functionality of zenoss requires a valid shell. The FreeBSD port until
now was installing a user account without a shell. To fix your existing
installation, please run the following command as root:
# pw usermod zenoss -s /bin/sh -d /usr/local/zenoss
20110808:
AFFECTS: users of dns/powerdns
AUTHOR: tremere@cainites.net
The port has been updated to PowerDNS 3.0, which includes support for DNSSEC.
Before upgrading please read the following:
http://doc.powerdns.com/upgrades.html#from2.9to3.0
Make sure to read the documentation and wiki on http://powerdnssec.org/ on
how to enable DNSSEC mode in the configuration-file and for the necessary
database changes.
Take note that not all backends support DNSSEC. The ones that do are BIND,
SQLite3 and Generic MySQL and PgSQL.
20110808:
AFFECTS: users of security/amavisd-new
AUTHOR: sahil@FreeBSD.org
Along with new features and bug fixes, amavisd-new 2.7.0 introduces some
incompatibilities with previous releases. Several variable defaults, SQL
schemas, and other changes warrant a careful review of the RELEASE_NOTES.
Also note that helper programs amavis.c and amavis-milter.c are no longer
distributed with this package; for milter functionality, please shift to
the dedicated security/amavisd-milter port.
20110731:
AFFECTS: users of lang/guile
AUTHOR: jlaffaye@FreeBSD.org
guile has been updated to version 1.8.8. Please rebuild all ports that
depends on it.
If you use portmaster:
# portmaster -r guile
If you use portupgrade:
# portupgrade -fr lang/guile
20110731:
AFFECTS: users of www/typo3
AUTHOR: Helmut Schneider <jumper99@gmx.de>
www/typo3 has been repocopied to www/typo345. If you need to continue with
the old stable version please run
# portmaster -o www/typo345 www/typo3
or
# portupgrade -o www/typo345 www/typo3
Please remember to change the path of your config files too.
20110730:
AFFECTS: users of x11-toolkits/gtk20
AUTHOR: gnome@FreeBSD.org
The gtk-update-icon-cache utility has been split out of the gtk20 port.
Use the following instructions to update your system.
# pkg_delete -f gtk-2.\*
# portmaster x11-toolkits/gtk20
# portmaster -a
20110726:
AFFECTS: users of devel/msp430-gcc
AUTHOR: lev@FreeBSD.org
msp430-gcc was updated to lates gcc-4.5.3 version.
If you want to use old gcc-3.4.4, run command:
# portmaster -o devel/msp430-gcc3 devel/msp430-gcc
or
# portupgrade -o devel/msp430-gcc3 devel/msp430-gcc
before updating devel/msp430-libc port.
20110721:
AFFECTS: users of games/megaglest
AUTHOR: smoeller@nichthelfer.de
If you upgraded from version 3.4.0, your personal settings are stored in
~/.megaglest3.4.0. If you copy glestuser.ini and glestuserkeys.ini to
~/.megaglest, you will have your old settings again.
20110721:
AFFECTS: users of security/gpgme
AUTHOR: jlaffaye@FreeBSD.org
gpgme has been updated to version 1.3.1. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r gpgme
If you use portupgrade:
# portupgrade -fr security/gpgme
20110718:
AFFECTS: users of hungarian/hunspell
AUTHOR: jlaffaye@FreeBSD.org
The hunspell port has been moved to textproc/hunspell.
To update the installed port run the command
# portmaster -o textproc/hunspell hungarian/hunspell
or
# portupgrade -o textproc/hunspell hungarian/hunspell
20110711:
AFFECTS: users of java/openjdk6
AUTHOR: jkim@FreeBSD.org
java/openjdk6 has been updated to b23 and "WEB" option (for web browser
plug-in and Java Web Start) has been deprecated. If you need the same
functionality, rebuild the port with "ICEDTEA" option first, then install
a new port java/icedtea-web with "PLUGIN" option (default). Also, if you
have a symlink to the previous IcedTeaPlugin.so in ~/.mozilla/plugins,
for example, you need to remove it. Note system-wide symlinks are now
automatically created by java/icedtea-web for your convenience.
20110711:
AFFECTS: users of www/p5-libwww
AUTHOR: mandree@FreeBSD.org
portmaster cannot process the upgrade of www/p5-libwww from version
5 to version 6. To upgrade p5-libwww, use portupgrade instead, or
deinstall p5-libwww before reinstalling:
If you use portmaster:
# pkg_delete -f 'p5-libwww-5*' ; portmaster www/p5-libwww
If you use portupgrade, no special treatment is necessary.
20110711:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to version 4.8. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r icu
If you use portupgrade:
# portupgrade -fr devel/icu
20110706:
AFFECTS: users of multimedia/zoneminder
AUTHOR: bsam@FreeBSD.org
RC script was renamed from zm to zoneminder. So do variables at
/etc/rc.conf[.local]. One should fix the latter file.
20110705:
AFFECTS: users of security/libgcrypt and any port that depends on it
AUTHOR: swills@FreeBSD.org
The libgcrypt port has been updated to 1.5.0 and all shared libraries
versions have been bumped. So you need to rebuild all applications that
depend on libgcrypt. Do something like:
# portmaster -r libgcrypt
or
# portupgrade -rf libgcrypt
20110703:
AFFECTS: users of print/lyx and print/lyx-devel
AUTHOR: makc@FreeBSD.org
print/lyx has been updated to 2.0. print/lyx16 has been added to ports tree
for those who prefers to stick with the last stable in lyx-1.6.x series.
20110630:
AFFECTS: users of math/octave-forge* and benchmarks/octave-forge-benchmark
AUTHOR: stephen@FreeBSD.org
The octave-forge* port structure has been completely redesigned. This was
to make them compatible with portmaster and other port installation tools.
Before using the new octave-forge* ports, the old octave-forge* ports must
be completely removed with, for example, the command:
# pkg_delete "octave-forge*"
20110630:
AFFECTS: users of mail/thunderbird
AUTHOR: gecko@FreeBSD.org
The mail/thunderbird port has been updated to 5.0. If you want to stay with
Thunderbird 3.1 please run:
# portupgrade -o mail/thunderbird3 mail/thunderbird
# portupgrade -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
or
# portmaster -o mail/thunderbird3 mail/thunderbird
# portmaster -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
Do not select the OPTIMIZED_CFLAGS option on a system with less then
2 GB of RAM otherwise you will run out of memory during the build.
Please make sure all your addons are compatible with Thunderbird 5.0 and
backup your ~/.thunderbird directory prior to the first launch of Thunderbird
5.0.
20110630:
AFFECTS: users of x11/wbar
AUTHOR: nivit@FreeBSD.org
x11/wbar has been updated to 2.2.2. Before launching the program, please
backup your configuration file (~/.wbar), and then use the command wbar-config
to set your preferences and change the path of the old icons (in particular
the Bar image).
20110629:
AFFECTS: users of graphics/opencv
AUTHOR: mm@FreeBSD.org
OpenCV was updated to version 2.3.0rc and to avoid circular dependencies
split into two ports: graphics/opencv-core and graphics/opencv
Before updating please uninstall the graphics/opencv port first because
the new dependency graphics/opencv-core contains conflicting files with
the old port graphics/opencv.
20110626:
AFFECTS: users of mail/p5-Mail-SpamAssassin
AUTHOR: wxs@FreeBSD.org
mail/p5-Mail-SpamAssassin has been updated to version 3.3.2. Prior to
starting spamd you must run sa-update, or spamd will fail to start.
20110624:
AFFECTS: users of deskutils/opengoo
AUTHOR: acm@FreeBSD.org
desktutils/opengoo has been renamed to deskutils/fengoffice, because
The OpenGoo name was changed to Feng Office Community Edition.
If you want migrate from opengoo to fengoffice, please see upgrading
section at:
http://fengoffice.com/web/wiki/doku.php/installation
20110623:
AFFECTS: users of databases/py-sqlalchemy
AUTHOR: nivit@FreeBSD.org
The version 0.6 of SQLAlchemy has been moved to databases/py-sqlalchemy06,
while the port databases/py-sqlalchemy now holds the series 0.7.X.
To update the installed port run the command
# portmaster -o databases/py-sqlalchemy06 databases/py-sqlalchemy
or
# portupgrade -o databases/py-sqlalchemy06 databases/py-sqlalchemy
20110622:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.4. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20110620:
AFFECTS: users of net/samba35
AUTHOR: timur@FreeBSD.org
A bug, introduced by local patch to pam_winbind.so, that made it coredump
was spotted by Martin Minkus. It is fixed in the 3.5.9 version of the port.
So, if pam_winbind.so started to work for you - send him kudos.
20110619:
AFFECTS: users of irc/ezbounce and irc/ezbounce-devel
AUTHOR: flo@FreeBSD.org
irc/ezbounce-devel was moved to irc/ezbounce as the version previously in
irc/ezbounce has been broken for some time and the distfile is not available
anymore.
If you are upgrading from a 1.0X version make sure to verify that your config
still works. There is basic compatibility for old config files but a lot has
changed, see http://linuxftw.com/ezbounce/files/CHANGES
If you run irc/ezbounce-devel you need to run one of the following commands:
# portmaster -o irc/ezbounce irc/ezbounce-devel
or
# portupgrade -o irc/ezbounce irc/ezbounce-devel
20110619:
AFFECTS: users of lang/perl5.14
AUTHOR: skv@FreeBSD.org
lang/perl5.14 has been updated to 5.14.1. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.14.
Please see its manual page for details.
If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
follow instructions in the entry 20110517 in this file.
20110618:
AFFECTS: users of mail/mailscanner
AUTHOR: crees@FreeBSD.org
mail/mailscanner no longer requires running of any renew-* targets to
update the config files / wrapper scripts; it is now automatically
performed as the port is installed -- these targets have been removed.
As an added bonus, the binary package now performs these steps as well,
in case you don't have a portstree handy.
Before upgrading, please backup your PREFIX/etc/MailScanner,
PREFIX/share/MailScanner and PREFIX/libexec/MailScanner if you
have customised any of these directories, just in case.
20110608:
AFFECTS: users of security/amavisd-milter
AUTHOR: delphij@FreeBSD.org
A change have been made to rc.d script for amavisd-milter makes it to
specify -s explicitly. If you used to override the location of listening
socket by specifying -s, please migrate to the new way (specify
amavisd_milter_socket in /etc/rc.conf).
20110607:
AFFECTS: users of devel/p5-Moose and devel/p5-Class-MOP
AUTHOR: az@FreeBSD.org
p5-Moose has been updated to 2.0007. Now p5-Class-MOP is a part of the
p5-Moose distribution. Manual intervention of the update procedure is
required:
# portmaster -o devel/p5-Moose devel/p5-Class-MOP
# portmaster -R -r p5-Moose-\*
or do the same things with portupgrade.
To check everything went fine you can run:
# perl -Moose\ 999
and
# perl -MClass::MOP\ 999
in both cases you should see output:
version 999 required--this is only version 2.0007
20110606:
AFFECTS: users of mail/sympa
AUTHOR: crees@FreeBSD.org
Sympa previously used to install to ${PREFIX}/sympa, which goes against
the general rules for hierarchy. Most files which were previously found
in ${PREFIX}/sympa should now be found in ${PREFIX}/libexec/sympa.
Any configuration in httpd.conf files etc will need to be updated to the
new directory.
Before upgrade, it is advisable to back up configuration files
${PREFIX}/etc/sympa.conf and wwsympa.conf since previous versions wipe these
out on deinstall.
20110606:
AFFECTS: users of databases/mariadb
AUTHOR: dougb@FreeBSD.org
The mariadb port has been split into -client, -scripts, and -server ports
ala mysql. You can now install only the parts that you need.
If you have devel/libevent installed along with mariadb you should do
something like:
pkg_delete mariadb\*
portmaster devel/libevent
20110605:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.12.6.1 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
portmaster -r gnutls
20110605:
AFFECTS: users of sysutils/zfsnap
AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>
There is an issue with zpool v28 (currently only on 9-CURRENT, or
8-STABLE systems that have been manually patched) that affects
zfSnap. If you are using v28 make sure to use the -zpool28fix flag
with zfsnap to work around the problem.
For more information please see:
http://wiki.bsdroot.lv/zfsnap#zpool_v28_zfs_destroy_-r_bug
20110602:
AFFECTS: users of net/freeradius
AUTHOR: Sevan Janiyan <venture37@geeklan.co.uk>
Freeradius no longer runs as nobody. It now runs as the freeradius
user. Please ensure that the following paths are owned by freeradius:
/var/run/radiusd
/var/log/radacct
/var/log/radius.log
20110529:
AFFECTS: users of textproc/*kmfl*
AUTHOR: nikola.lecic@anthesphoria.net
KMFL keyboard ports are now shared between IBus and SCIM KMFL IMEngines
(textproc/ibus-kmfl and textproc/scim-kmfl-imengine). Thus, the prefix
'scim-' is dropped from keyboard ports names.
Similar to m17n, both engines now search engine-neutral locations,
${LOCALBASE}/share/kmfl/ and ~/.kmfl/. Users have to move their local
keyboard files from ~/.scim/kmfl/ to ~/.kmfl/.
20110523:
AFFECTS: users of www/mod_perl2
AUTHOR: ohauer@FreeBSD.org
mod_perl2 was updated to version 2.0.5, this version includes
p5-Apache-Reload again. The ports p5-Apache-Reload is now marked as
conflict for mod_perl2.
To update your mod_perl2 with portmaster use the commands
# portmaster -o www/mod_perl2 www/p5-Apache-Reload
# portmaster -R -r mod_perl2
20110522:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: vbox@FreeBSD.org
The emulators/virtualbox-ose port has been updated to 4.0.8. If you
want to stay with VirtualBox 3.2.x please run:
# portmaster -o emulators/virtualbox-ose-kmod-legacy emulators/virtualbox-ose-kmod
# portmaster -o emulators/virtualbox-ose-legacy emulators/virtualbox-ose
or
# portupgrade -o emulators/virtualbox-ose-kmod-legacy emulators/virtualbox-ose-kmod
# portupgrade -o emulators/virtualbox-ose-legacy emulators/virtualbox-ose
The emulators/virtualbox-ose-legacy port will always include the
latest legacy version as a fallback if you hit a serious regression
in the latest version.
20110517:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.14 is out. If you want to switch to it from, for example
lang/perl5.12, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.14):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.14 -f perl-5.12.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.14 lang/perl5.12
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20110516:
AFFECTS: users of net/skype, net/skype-devel, net-im/skype, net-im/skype-devel
AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org>
All skype ports were moved to net-im/:
- skype12: unchanged, very old version (for FreeBSD 6)
- skype20: last version with OSS support, that used to live in net/skype; the
DISTFILE is gone from the vendor but if you happen to have it, it would be a
way of having sound w/o needing to upgrade your base OS
- [RECOMMENDED] skype: currently at 2.1.0.81 and the best supported
- skype-devel: currently at 2.2.0.25, sounds is OK, video doesn't work
To run either skype or skype-devel with fully working sound you need:
- to run fc10 (most probably, please report what you can do with fc4):
(OVERRIDE_LINUX_BASE_PORT=f10,OVERRIDE_LINUX_NONBASE_PORTS=f10
in /etc/make.conf for systems that doesn't have it as default)
- In order for Skype to work OK, you need your kernel and modules to be:
- post 2011-05-03 in on HEAD
- post 2011-05-08 in on 7,8-STABLE
The port tries to catch if your system version is too old, but there's a
~3months window where because of a lack of OSVERSION bump, this is not
possible. So please check; and PLEASE READ THE PKGMESSAGE for setup details.
For how to update your kernel/world, see:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
IF YOUR OSVERSION IS NOT NEW ENOUGH, SOUND (ESPECIALLY MIC) WON'T WORK.
If you run into problems, at very least we need to know the output of:
$ uname -a; sysctl compat.linux | head -2; \
grep OVERRIDE_LINUX_ /etc/make.conf; \
cat /compat/linux/etc/alsa/pcm/pcm-oss.conf
the skype version you are using and hardware details (eg. webcam, if related)
I most probably will ignore any mail not containing this info since without
it it's impossible to help.
Please test your sound /video setup outside skype before blaming skype /
mailing me.
20110516:
AFFECTS: users of audio/musicpd
AUTHOR: Chris Rees <utisoft@gmail.com>
Musicpd now installs the binary for the server as bin/musicpd, rather than
mpd, to remove a conflict with net/mpich2; before upgrade you should run:
# /usr/local/etc/rc.d/musicpd stop
Likewise, mpd.conf has been renamed musicpd.conf-- if you want to keep it
as mpd.conf then place MPDCONF="mpd.conf" into /etc/make.conf, otherwise
after upgrade run:
# mv /usr/local/etc/mpd.conf /usr/local/etc/musicpd.conf
20110514:
AFFECTS: users of sysutils/gksu, sysutils/libgksu, sysutils/libgksuui
AUTHOR: bsam@FreeBSD.org
sysutils/gksu has been updated to 2.0.2. sysutils/libgksuui has been
deprecated since it has become a part of sysutils/libgksu.
Before upgrading remove sysutils/libgksuui.
20110511:
AFFECTS: users of editors/emacs
AUTHOR: ashish@FreeBSD.org
Due to a bug when upgrading from 23.2 or later versions, everything
installed by other ports in "${PREFIX}/share/emacs" gets removed.
Before upgrading:
* Please backup custom configurations in "${PREFIX}/share/emacs".
* After upgrading reinstall any ports that may have had files in the
"${PREFIX}/share/emacs" directory.
20110509:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: ashish@FreeBSD.org
GHC has been updated to version 7.0.3 and other Haskell ports are also
updated to their Haskell Platform versions or latest versions.
To update all affected ports:
# portmaster -r lang/ghc
or
# portupgrade -r lang/ghc
20110506:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
Default version of Perl was bumped to 5.12.
If you already have lang/perl5.10 or lang/perl5.8 installed, and want to
switch to lang/perl5.12 please follow instructions in the entry 20100715
in this file.
20110503:
AFFECTS: users of www/codeigniter and www/codeigniter-devel
AUTHOR: glarkin@FreeBSD.org
www/codeigniter has been renamed to www/codeigniter17 to track the
legacy 1.7.* branch of Codeigniter development. www/codeigniter-devel
has been renamed to www/codeigniter to track the recommended 2.0.*
branch of Codeigniter development.
If you have Codeigniter 1.7.x installed and would like to continue using
it, please run one of the following commands to update its origin:
# portmaster -o www/codeigniter17 www/codeigniter
or
# portupgrade -o www/codeigniter17 www/codeigniter
If you have Codeigniter 2.0.x installed, please run one of the following
commands to update its origin:
# portmaster -o www/codeigniter www/codeigniter-devel
or
# portupgrade -o www/codeigniter www/codeigniter-devel
20110427:
AFFECTS: users of mail/ezmlm-idx
AUTHOR: glarkin@FreeBSD.org
1) Please consult the instructions for upgrading to version 7.1.1 from
the earlier 0.444 version in the ports tree:
Online: https://github.com/bruceg/ezmlm-idx/blob/master/UPGRADE
Local: /usr/local/share/doc/ezmlm-idx/UPGRADE
2) SQLite3 has been added as a supported database plugin. Note that the
MySQL, PgSQL and SQLite options are mutually exclusive, and the first
selected option takes precedence if multiple options are selected.
20110421:
AFFECTS: users of multimedia/webcamd
AUTHOR: kwm@FreeBSD.org
Webcamd now creates device nodes with 0660 permission and webcamd:webcamd
ownership. To get access to the webcamd devices just add yourself to the
webcamd group.
20110409:
AFFECTS: users of japanese/asterisk-sounds
AUTHOR: tota@FreeBSD.org
The japanese/asterisk-sounds has been updated to 1.8.
If you want to stay with ja-asterisk14-sounds, please run:
# portmaster -o japanese/asterisk14-sounds japanese/asterisk-sounds
or
# portupgrade -o japanese/asterisk14-sounds japanese/asterisk-sounds
See also 20101128 net/asterisk entry.
20110406:
AFFECTS: users of lang/ocaml and related libraries/applications
AUTHOR: stas@FreeBSD.org
Ocaml compiler and libraries suite has been updated to 3.12.
There appears to be an ABI incompatibility with .cmi files
generated by previous compiler versions. Though these should
only affect the linking process, if some application you're
using start to misbehave after the lang/ocaml updated you're
advised to rebuild this applications using the new ocaml version.
20110402:
AFFECTS: users of net-mgmt/xymon-client and net-mgmt/xymon-server
AUTHOR: dinoex@FreeBSD.org
Loginname, path, scripts and config files have been renamed in 4.3.0
Steps to update:
1. Stop and deinstall the old version.
2. Copy the remaining config files to the new location.
3. Read the instructions
4. merge your old config with the upgrade430.sh script
5. fix the hobbit_*_enable lines in /etc/rc.conf
# /usr/local/etc/rc.d/hobbit-server stop
# /usr/local/etc/rc.d/hobbit-client stop
# pkg_delete /var/db/pkg/xymon-*
# pkg_add xymon-client-4.3.0.tbz
# pkg_add xymon-server-4.3.0.tbz
# cp /usr/local/www/hobbit/server/etc/* /usr/local/www/xymon/server/etc/
# less /usr/local/www/xymon/server/www/help/upgrade-to-430.txt
# /usr/local/www/xymon/server/bin/bbcmd /usr/local/www/xymon/server/bin/upgrade430.sh
# sed -i '' -e 's|hobbit|xymon' /etc/rc.conf
# /usr/local/etc/rc.d/xymon-client start
# /usr/local/etc/rc.d/xymon-server start
20110328:
AFFECTS: users of net/openldap24-client
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.25. In this version, certain library
routines were moved from liblutil to libldap. If you previously built
the library with "FETCH" support, this would cause libldap to depend on
FreeBSD's libfetch.so library.
As of 20110402, a local change have been introduced so OpenLDAP libraries
link against libfetch.so when FETCH is enabled. Normally, no further user
interaction would be required.
For new installations, the FETCH option have been turned off by default.
20110324:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.6.1. As usual a number of files were
moved between packages, manual intervention into update procedure is
required:
# pkg_delete -f kdehier4\* kdebase-runtime-4\* kdebase-workspace-4\*
# pkg_delete -f kdeedu-4\* kdeutils-4\*
# portmaster -a
20110322:
AFFECTS: users of www/firefox
AUTHOR: gecko@FreeBSD.org
The www/firefox port has been updated to 4.0. If you want to stay with
Firefox 3.6 please run:
# portupgrade -o www/firefox36 www/firefox
# portupgrade -o www/firefox36-i18n www/firefox-i18n (if installed)
or
# portmaster -o www/firefox36 www/firefox
# portmaster -o www/firefox36-i18n www/firefox-i18n (if installed)
Do not select the OPTIMIZED_CFLAGS option on a system with less then
2 GB of RAM otherwise you will run out of memory during the build.
Please make sure all your addons are compatible with Firefox 4.0 and
backup your ~/.mozilla directory prior to the first launch of Firefox
4.0.
The startup script has been renamed from firefox3 to firefox.
20110319:
AFFECTS: users of databases/mysql55-client
AUTHOR: ale@FreeBSD.org
The shared library version of the client library was increased to reflect
ABI changes, and avoid compatibility problems with the client library
in MySQL 5.1, so client programs that use the 5.5 client library should
be recompiled against the 5.5.10 client library.
This can be achieved with:
# portmaster -r mysql-client-5.5
or
# portupgrade -fr mysql-client-5.5
20110318:
AFFECTS: users of www/node and www/node-devel
AUTHOR: araujo@FreeBSD.org
The port www/node was merged with www/node-devel since there is no longer a
development version. Also www/node has not followed the stable upstream
prior to this update.
To keep www/node updated in your applications, from now on you must use
www/node instead of www/node-devel. If you have been using the www/node-devel,
you must run one of the following commands to upgrade:
# portmaster -o www/node www/node-devel
or
# portupgrade -o www/node www/node-devel
20110317:
AFFECTS: users of www/uzbl
AUTHOR: Klaus Aehlig <aehlig@linta.de>
The port has been updated to version as of 2011/02/15. This introduces
the following incompatabilities.
- $UZBL_FIFO, $UZBL_TITLE are available to scripts as environment variables,
but not as command-line arguments.
- environment variables are no longer expanded by the config parser
- download handling has changed
- cookie daemons are no longer supported
Users are advised to change their personal configuration files/scripts accordingly.
20110316:
AFFECTS: users of sysutils/duplicity
AUTHOR: peter.schuller@infidyne.com
sysutils/duplicity has been upgraded to 0.6.11. The old version
(0.5.20) is retained as sysutils/duplicity05. Duplicity 0.6 should
be generally compatible, but pay special attention to the new meaning
of the --archive-dir command. In particular, the archive dir is now
mandatory and defaults to ~/.cache/duplicity. You may have to
--exclude accordingly. In addition, it is recommended you consult
the CHANGELOG, specifically the "New in v0.6.00 (2009/06/08)" section
which details the checkpoint/restore feature (enabled by default) and
its implications.
20110313:
AFFECTS: users of astro/boinc-setiathome-enhanced
AUTHOR: rene@FreeBSD.org
The setiathome client has been updated to version 6.12. Before you
update, finish and report your current workunits to avoid losing them.
20110304:
AFFECTS: users of lang/python* and py-*
AUTHOR: miwi@FreeBSD.org
The default version of Python has been changed from 2.6.x to 2.7.x.
If you have 2.6.x installed, perform an upgrade of lang/python26 to
lang/python27 with one of the following commands:
If using portupgrade:
# portupgrade -o lang/python27 lang/python26
If using portmaster:
# portmaster -o lang/python27 lang/python26
If you want to retain 2.6.x as default Python version, set the
PYTHON_DEFAULT_VERSION variable to 'python2.6' (without quotes) in
/etc/make.conf, then go to lang/python and perform the following
command:
# portupgrade -R python
Once the installed Python has been updated to 2.7, by using the
method above, it is required to run the upgrade-site-packages target in
lang/python to assure that site-packages are made available to the new
Python version.
If using portupgrade:
# cd /usr/ports/lang/python && make upgrade-site-packages
If using portmaster:
# cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
The portmaster case can take quite some time to complete due to the lack of
cached information that the portupgrade suite uses (specifically pkg_which).
This is not the fault of portmaster.
20110301:
AFFECTS: users of databases/jasperserver
AUTHOR: jhelfman@experts-exchange.com
(taken from release notes of 4.0 from vendor)
If you are upgrading from an older JasperServer version such as 3.5 then
you must first upgrade to JasperServer 3.7 before upgrading to 4.0.
Upgrading directly from JasperServer 3.5 to 4.0 is not a "certified"
(i.e. fully QA tested) procedure.
The steps to carry out this operation are fully documented in the
JasperReports Server Installation Guide for the 3.7 release. You will
need to download the JasperServer 3.7 release package to get the relevant
files and documentation. To download the JasperServer 3.7 WAR file
distribution zip package, go to the JasperForge.org website and to the
JasperServer project.
http://jasperforge.org/projects/jasperserver
20110228:
AFFECTS: users of devel/ccache
AUTHOR: Emanuel Haupt <ehaupt@FreeBSD.org>
ccache now allows the use of non-default compilers such as clang. This
requires adjustments of the ccache make glue.
Please (re)read the following document after updating ccache to
ccache-3.1.4_1:
/usr/local/share/doc/ccache/ccache-howto-freebsd.txt
20110227:
AFFECTS: users of net/unison and net/unison-devel
AUTHOR: mandree@FreeBSD.org
Unison has been upgraded to version 2.40, which uses a different wire
protocol than 2.32 did. In order to support synchronization with
other computers where Unison is still at version 2.32, a new port
net/unison232 has been created. It provides unison232 and if that is
GTK2-enabled, also unison232-text. This unison232 port can be
installed in parallel with the existing net/unison port.
20110224:
AFFECTS: users of x11-drivers/xf86-video-ati
AUTHOR: miwi@FreeBSD.org
X.Org has been updated to 7.5.1. For all ATI users the driver
was updated to 6.14.0 but the old one is still available in
x11-drivers/xf86-video-ati613. See radeon(5) for options
available.
20110224:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.24, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
or
# portmaster -r net/openldap24-client
20110224:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.2 and 7.4 released.
20110209:
AFFECTS: users of www/testlink
AUTHOR: tota@FreeBSD.org
Testlink 1.9.1 was released. Before updating, you should read carefully
the included README file because this release requires a manual update
of the database scheme.
20110125:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.3. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20110124:
AFFECTS: users of mail/postfix
AUTHOR: sahil@FreeBSD.org
Postfix 2.8 introduces minor incompatibilities with previous versions.
Alias expansion, dns lookups, TLS support, milters and other features
are affected. To avoid surprises, carefully review the RELEASE_NOTES.
If you upgrade from Postfix 2.6 or earlier, you must execute "postfix
stop" and "postfix start" before you can use the postscreen(8) daemon.
This is needed because the Postfix 2.6 "pass" master service type did
not work reliably on some systems. If you upgrade from Postfix 2.7, or
from Postfix 2.8 before July 25, 2010, you must "postfix reload" (or
"postfix stop" followed by "postfix start"). This is needed because
the queue manager to delivery agent protocol has changed.
Also note that the optional SPF and VDA patches have not been updated
for Postfix 2.8; as a result, they are currently disabled.
20110111:
AFFECTS: users of www/redmine
AUTHOR: decke@FreeBSD.org
If you use 3rd party plugins that are incompatible with i18n >= 0.5.0
(eg. variables in yml files as {{variable}}) then you need to
install an older i18n version manually.
# gem install -v=0.4.2 i18n
Then upgrade the database as usual:
# rake db:migrate RAILS_ENV=production
20110107:
AFFECTS: users of mail/exim
AUTHOR: rea@FreeBSD.org
[POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user
is now the Exim run-time user, instead of root.
[POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer
optional and is forced on. This is mitigated by the new build
option TRUSTED_CONFIG_LIST which defines a list of configuration
files which are trusted; one per line. If a config file is owned
by root and matches a pathname in the list, then it may be invoked
by the Exim build-time user without Exim relinquishing root
privileges.
[POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
trusted to supply -D<Macro[=Value]> overrides on the command-line.
Going forward, we recommend using TRUSTED_CONFIG_LIST with shim
configs that include the main config. As a transition mechanism,
we are temporarily providing a work-around: the new build option
WHITELIST_D_MACROS provides a colon-separated list of macro names
which may be overriden by the Exim run-time user. The values of
these macros are constrained to the regex ^[A-Za-z0-9_/.-]*$
(which explicitly does allow for empty values).
Upgrading users are encouraged to fully study
ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.73
and
ftp://exim.inode.at/exim/ChangeLogs/ChangeLog-4.73
20110103:
AFFECTS: users of textproc/libwpd and graphics/libwpg
AUTHOR: fluffy@FreeBSD.org
LibWPD and LibWPG is now using new API, partially incompatible with
previous versions.
For correct upgrade procedure please upgrade LibWPD and LibWPG first
as described, than follow usual upgrade procedure
# portmaster -o textproc/libwpd08 libwpd
# portmaster -o graphics/libwpg01 libwpg
substitute 'portupgrade' for 'portmaster' accordingly if that's your
your upgrade tool of choice.
20101230:
AFFECTS: users of databases/postgresql??-(server|client)
AUTHOR: ohauer@FreeBSD.org
PostgreSQL version 8.4 is now the default. To upgrade from a version
lower than 8.4, follow the instructions on the PostgreSQL.org website.
http://www.postgresql.org/docs/8.4/interactive/install-upgrading.html
20101230:
AFFECTS: users of net-mgmt/pnp
AUTHOR: rea@FreeBSD.org
Starting from 0.6.10_1 config.php is no longer preserved across
upgrades; PNP way is to put all modifications into config_local.php.
Existing config.php will be saved as config.php.orig and you should
review your deviations from defaults and place them into
config_local.php.
20101227:
AFFECTS: users of databases/mysql55-server
AUTHOR: ale@FreeBSD.org
MySQL 5.5 has been updated to 5.5.8 GA release. Since layout is
changed you should remove mysql55-{client/server/scripts} ports
before upgrading. The build system is changed too, so expect
failures.
20101227:
AFFECTS: users of security/opensc
AUTHOR: ale@FreeBSD.org
opensc has been updated to 0.12.0 release. Only one backend can be
choosen at compile-time: PC/SC is now the default one.
opensc doesn't export anymore its internal library, PKCS#11 is the
recommended interface.
20101220:
AFFECTS: users of net-mgmt/flowd
AUTHOR: ohauer@FreeBSD.org
flowd use now a fix UID/GID (id 542) instead the next free UID.
Before updating the port use the command "pw userdel _flowd"
20101216:
AFFECTS: users of security/libksba
AUTHOR: glarkin@FreeBSD.org
libksba has been updated to 1.1.0, and the shared library version has
increased from .17 to .18.
Directly- and indirectly-dependent ports have had their PORTREVISION
bumped to facilitate rebuilding. Please rebuild the dependent ports
with your preferred upgrading tool:
# portupgrade -rf security/libksba
-or-
# portmaster -w -r security/libksba
If there are still ports on your system that require ksba.so.17 (either
in ${LOCALBASE}/lib/compat/pkg, or non-existent), _please_ file a PR so
that a correct direct dependency can be added.
Once you are satisfied that no ports still depend on the old shared
library version (libksba.so.17), you can safely delete it from the
${LOCALBASE}/lib/compat/pkg directory if it is present there.
20101216:
AFFECTS: users of databases/akonadi
AUTHOR: avilla@FreeBSD.org
With SQLite 3 installed, Akonadi used to build its plugin and
install it in a wrong place, without it being listed in plist. To
remove the orphaned file, run the following commands PRIOR TO the
Akonadi upgrade:
# cd /usr/ports/databases/akonadi
# rm `make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL`/sqldrivers/libqsqlite3.so
# rmdir `make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL`/sqldrivers \
`make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL` \
`make -V KDE4_PREFIX`/`make -V QT_LIBDIR_REL`
20101214:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to version 4.6. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r icu
If you use portupgrade:
# portupgrade -fr devel/icu
Note that devel/icu4 is now deprecated consider replacing it by devel/icu
# portmaster -o devel/icu devel/icu4
or
# env DISABLE_CONFLICTS=1 portupgrade -o devel/icu -f icu-4\*
20101211:
AFFECTS: users of devel/bugzilla, japanese/bugzilla and russian/bugzilla-ru
AUTHOR: tota@FreeBSD.org
Bugzilla and its language packs are installed to
WWWDIR (defaults to PREFIX/www/bugzilla).
BUGZILLADIR (that defaulted to PREFIX/www/data/bugzilla) is deprecated.
20101211:
AFFECTS: users of databases/mysql-proxy
AUTHOR: Florian Smeets <flo@smeets.im>
The parameters --admin-username and --admin-password are mandatory now.
Add something like the following to rc.conf
mysql_proxy_args="--admin-username admin --admin-password somepassword"
20101210:
AFFECTS: users of multimedia/avidemux2
AUTHOR: nox@FreeBSD.org
The port has been updated to 2.5.4 which now installs plugins separately
and I had to make a slave port for them, multimedia/avidemux2-plugins.
So you'll now have to install that port too for the app to become useful.
20101208:
AFFECTS: autotools
AUTHOR: autotools@FreeBSD.org
Another stage in the autotools cleanup that reduces tree churn whilst
updating components, a number of ports have now moved to non-versioned
locations since there is now only the concept of legacy and current
versions.
# portmaster -o devel/autoconf devel/autoconf268
# portmaster -o devel/automake devel/automake111
# portmaster -o devel/libtool devel/libtool22
# portmaster -o devel/libltdl devel/libltdl22
substitute 'portupgrade' for 'portmaster' accordingly if that's your
your upgrade tool of choice.
20101205:
AFFECTS: users of www/py-flexget
AUTHOR: lioux@FreeBSD.org
Database schema changes. Please run:
$ sqlite3 db-config.sqlite "ALTER TABLE thetvdb_favorites ADD series_id VARCHAR;"
$ sqlite3 db-config.sqlite "ALTER TABLE imdb_movies ADD updated DateTime;"
$ sqlite3 db-config.sqlite "ALTER TABLE imdb_movies ADD mpaa_rating VARCHAR;"
inside flexget configuration directory (~/.flexget) for each
sqlite database you might have.
Replace "db-config.sqlite" with the appropriate name for your
sqlite database file.
20101204:
AFFECTS: users of audio/libmpcdec
AUTHOR: lioux@FreeBSD.org
audio/libmpcdec has been removed in favor of audio/musepack; which
has a higher shared library version. You will have to rebuild all
ports that depend on audio/libmpcdec. Do this:
Portmaster users:
# portmaster -o audio/musepack audio/libmpcdec
# portmaster -r musepack-
Portupgrade users:
# env DISABLE_CONFLICTS=1 portupgrade -o audio/musepack -f libmpcdec-\*
# pkgdb -Ff
# portupgrade -rf musepack-\*
20101204:
AFFECTS: autotools
AUTHOR: autotools@FreeBSD.org
The next stage in the ongoing cleanup of autotools-using ports is
a refactoring of bsd.autotools.mk so that version numbers are no longer
needed within the USE_AUTOTOOLS stanza. There is either
autoconf213/autoconf or automake14/automake (for the legacy versions,
and the currently available versions). This will considerably reduce
the amount of tree-wide patching in future on an update.
IMPORTANT: if you have either devel/autoconf-wrapper or
devel/automake-wrapper installed on your system (and you most likely do)
PLEASE update these ports to their new versions before updating anything
else -- Bad Things[tm] are likely to happen otherwise.
20101202:
AFFECTS: users of multimedia/gstreamer-plugins
AUTHOR: multimedia@FreeBSD.org
If during the upgrade of gstreamer-plugins the following error happens:
GstAudio-0.10.gir: Incompatible version 1.0 (supported: 1.2)
Use the following command to upgrade:
cd ports/multimedia/gstreamer-plugins && make deinstall clean install
20101202:
AFFECTS: users of www/wordpress
AUTHOR: sunpoet@FreeBSD.org
WordPress is now installed to WWWDIR (defaults to PREFIX/wordpress)
instead of WORDPRESS (defaults to PREFIX/www/data/wordpress).
20101129:
AFFECTS: users of sysutils/radmind
AUTHOR: ohauer@FreeBSD.org
The radmind user and group is created automatically during installation.
The owner of $RADMIND_BASE_DIR changes from root to radmind.
20101128:
AFFECTS: users of net/asterisk, net/asterisk-addons
AUTHOR: Florian Smeets <flo@smeets.im>
If you want to upgrade to 1.8.0 first remove asterisk-addons by running
# pkg_delete -f asterisk-addons\*
after that you can run one of the following
# portmaster asterisk
or
# portupgrade asterisk
You need to update your config files as the step from 1.4.x to 1.8.x is
quite big. First you need to look at what changed between 1.4 and 1.6
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE-1.6.txt
After that you also need to take into account what chagne between
1.6 and 1.8
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE.txt
If you want to stay with asterisk 1.4.x please run
# portmaster -o net/asterisk14 net/asterisk
# portmaster -o net/asterisk14-addons net/asterisk-addons
or
# portupgrade -o net/asterisk14 net/asterisk
# portupgrade -o net/asterisk14-addons net/asterisk-addons
20101127:
AFFECTS: users of mail/postfix, mail/postfix2[56]
AUTHOR: sahil@FreeBSD.org
As of Postfix 2.7.2, 2.6.8, 2.5.11:
Postfix no longer automatically appends the system default CA
(certificate authority) certificates, when it reads the CA
certificates specified with {smtp, lmtp, smtpd}_tls_CAfile or
with {smtp, lmtp, smtpd}_tls_CApath. This prevents third-party
certificates from getting mail relay permission with the
permit_tls_all_clientcerts feature. Unfortunately, this change
may cause compatibility problems with configurations that rely
on certificate verification for other purposes. To get the old
behavior, specify "tls_append_default_CA = yes".
20101124:
AFFECTS: users of www/py-flexget
AUTHOR: lioux@FreeBSD.org
metainfo_series is no longer a builtin. This should only affect
you if you aren't using one of the series plugins (series,
all_series, thetvdb_favorites, or series_premiere.) If you need
to enable metainfo_series manually for a feed it can be done like
so:
metainfo_series: yes
20101120:
AFFECTS: users of x11-toolkits/gtk20 and x11-toolkits/gtkmm24
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
In the GNOME 2.32 release. gdk-pixbuf2 has been split off from gtk20,
and atkmm has been split off from gtkmm24. To upgrade please use the
following instructions:
Portmaster users:
# pkg_delete -f gtkmm-2.20\* gtk-2.20\*
# portmaster -a
Portupgrade users:
# pkgdb -fF
# pkg_deinstall -fO gtkmm-2.20\* gtk-2.20\*
# portupgrade -aOW
20101118:
AFFECTS: users of editors/emacs-devel
AUTHOR: Ashish SHUKLA <ashish@FreeBSD.org>
Due to a bug when upgrading from 24.0.50.101606, everything
installed by other ports in "${PREFIX}/share/emacs" gets removed.
Before upgrading:
* Please backup custom configurations in "${PREFIX}/share/emacs".
* After upgrading reinstall any ports that may have had files in the
"${PREFIX}/share/emacs" directory.
Apologies for this inconvenience.
20101117:
AFFECTS: users of net-p2p/transmission-cli and net-p2p/transmission-gtk
AUTHOR: Mezz <mezz@FreeBSD.org>
Transmission has been updated to 2.12. The following name of binaries and
manpages have been renamed:
transmissioncli -> transmission-cli
transmission -> transmission-gtk
20101117:
AFFECTS: users of devel/ccache
AUTHOR: Emanuel Haupt <ehaupt@FreeBSD.org>
Updated instructions on how to workaround a buildworld failure have been
committed. Please (re)read the following document after updating ccache to
3.1.1_1:
/usr/local/share/doc/ccache/ccache-howto-freebsd.txt
20101110:
AFFECTS: users of databases/mysql55-server
AUTHOR: Alex Dupre <ale@FreeBSD.org>
If you are upgrading from a previous MySQL release, the server will exit
during startup after finding that the proxies_priv table is missing.
To create the table, start the server with the --skip-grant-tables
option to cause it to skip the normal grant table checks, then run
mysql_upgrade. Then stop the server and restart it normally.
You can do this by temporarly setting the following line in rc.conf:
mysql_args="--skip-grant-tables --skip-networking"
20101108:
AFFECTS: users of databases/py-bsddb3
AUTHOR: wen@FreeBSD.org
py-bsddb3 update to 5.1.0. This release drops support for Berkeley
DB 4.1, and adds support for Berkeley DB version 5.1, brand new. If
you need Berkeley DB 4.1 support, keep using pybsddb 5.0.0. If you
want support for Berkeley DB 5.1, remember to install the BDB library
before installing these bindings.
20101030:
AFFECTS: users of www/xshttpd-devel
AUTHOR: johans@FreeBSD.org
The default XS-httpd configuration file locations have changed:
The main configuration file is now $PREFIX/etc/xshttpd/httpd.conf
and other configuration file are stored in that same directory.
Existing configurations should be moved over manually.
Log files now appear in /var/log/xshttpd/ by default.
20101029:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: Doug Barton <dougb@FreeBSD.org>
The changes to bsd.port.mk in 1.652 require all portmaster users to
upgrade to version 3.1 or later. The best method to do this will be
to use the port, rather than portmaster itself:
# pkg_delete -f portmaster\*
# cd /usr/ports/ports-mgmt/portmaster && make clean && make install clean
20101026:
AFFECTS: users of net/samba35
AUTHOR: Timur Bakeyev <timur@FreeBSD.org>
This is the latest stable release of the Samba3 distribution. It has
been extended with the experimental support of the NFS4-like ACLs on
ZFS partitions, thanks to the sysutils/libsunacl library by Edward
Tomasz Napierala(trasz). This support haven't been tested thoroughly,
so try it on your own risk.
This port reverted back to the pre- net/samba34 layout of the
directories and now they are again $PREFIX/etc/samba, /var/run/samba,
/var/log/samba, /var/db/samba and /var/spool/samba respectively.
In case, you are upgrading from net/samba34, please rename
corresponding samba34/ subdirectories into samba/ ones. Upgrades from
older versions of Samba and fresh installations should be seamless.
20101015:
AFFECTS: users of devel/llvm-devel who use clang
AUTHOR: Brooks Davis <brooks@FreeBSD.org>
The clang portion of devel/llvm-devel has been split out and now
resides in lang/clang-devel. If you have devel/llvm-devel installed
in order to use clang, you will need to install the clang-devel port
when upgrading.
20101003:
AFFECTS: users of www/typo3
AUTHOR: Helmut Schneider <jumper99@gmx.de>
www/typo3 has been repocopied to www/typo343. If you need to continue with
the old stable version please run
# portmaster -o www/typo343 www/typo3
or
# portupgrade -o www/typo343 www/typo3
Please remember to change the path of your config files too.
20101003:
AFFECTS: users of net-mgmt/kismet
AUTHOR: bf@FreeBSD.org
This update includes major changes in how Kismet works and is configured.
Clients, servers, drones, and configuration files must be updated to work
with the new version. Map support has not yet been added.
See the kismet README for details.
20100929:
AFFECTS: users of sysutils/zfsnap
AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>
Since timestamp format changed you need to use -o option with -d
option in order to be able to delete old snapshots. Note however that
you don't need -o when creating new snapshots, unless you want to keep
using the old timestamp format.
See http://wiki.bsdroot.lv/zfsnap for more info.
20100927:
AFFECTS: users of mail/postfix-current
AUTHOR: ohauer@FreeBSD.org
Incompatibility with snapshot 20100912
======================================
- If your DNSBL queries have a "secret" in the domain name, you must
now censor this information from the postscreen(8) SMTP replies.
- The postscreen "continue" action is now called "ignore". The old
name is still supported but no longer documented.
- The postscreen_hangup_action parameter was removed. Postscreen
now always behaves as if "postscreen_hangup_action = drop".
- The postscreen_cache_retention_time default was increased from
1d to 7d, to avoid deleting results from expensive deep SMTP
protocol tests too quickly.
Incompatibility with snapshot 20100827
======================================
- The Postfix SMTP client no longer appends the local domain when
looking up a DNS name without ".".
Specify "smtp_dns_resolver_options = res_defnames" to get the old
behavior, which may produce unexpected results.
20100924:
AFFECTS: users of x11/nvidia-driver
AUTHOR: makc@FreeBSD.org
nvidia-driver does not install vdpau library and headers anymore, they
are now provided by multimedia/libvdpau port. To avoid conflict, please
rebuild nvidia-driver port before upgrading your ports and before
installing multimedia/libvdpau.
20100921:
AFFECTS: users of p5-Compress-Zlib, p5-IO-Compress-*
AUTHOR: mm@FreeBSD.org
The p5-Compress-Zlib, p5-IO-Compress-Base, p5-IO-Compress-Zlib and
p5-IO-Compress-Bzip2 ports have been replaced by p5-IO-Compress.
Users of Perl 5.10 and higher do not need to install this module
because it is already included in the standard perl distribution.
20100920:
AFFECTS: users of security/stunnel
AUTHOR: roam@FreeBSD.org
In stunnel-4.34, the DH support is no longer configurable by the user,
but always enabled when OpenSSL supports it instead. This means that
it will now most probably be enabled on the supported versions of FreeBSD.
If this leads to problems with old SSL clients, I will look into making
it configurable at build time again.
20100917:
AFFECTS: users of sysutils/cdrtools-cjk
AUTHOR: marius@FreeBSD.org
sysutils/cdrtools-cjk port has been removed, as the required functionality is
now available in cdrtools 3.0.0 in the standard sysutils/cdrtools port.
20100915:
AFFECTS: autoconf, automake
AUTHOR: autotools@FreeBSD.org
autoconf has been updated from 2.62 to 2.67 -- all ports depending on
autoconf-2.62 have had their PORTREVISIONs update, so a standard
port updating method will suffice.
USE_GETTEXT has been extended to also accept 'build' and 'run' for
ports which need devel/gettext as a BUILD- or RUN-time dependency only.
No port should now be directly depending on devel/gettext in Makefiles.
20100915:
AFFECTS: users of sysutils/cdrtools-cjk
AUTHOR: marius@FreeBSD.org
Version 3.00 of sysutils/cdrtools breaks but at the same time also
obsoletes sysutils/cdrtools-cjk as mkisofs now employs iconv for
character conversion. Consequently sysutils/cdrtools-cjk is marked
BROKEN and the use of USE_CDRTOOLS=cjk as well as USE_CDRTOOLS together
with the WITH_CJK knob left in a broken state until bsd.port.mk is
updated by portmgr@ accordingly. Once USE_CDRTOOLS is updated to no
longer refer to sysutils/cdrtools-cjk the latter will be removed.
Previous users of sysutils/cdrtools-cjk should switch to using
sysutils/cdrtools instead, which might require not using the WITH_CJK
knob until said update of bsd.port.mk has happened.
20100915:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20100912:
AFFECTS: ftp/curl
AUTHOR: roam@FreeBSD.org
With version 7.21.1, the cURL port is built with stricter compiler
checking by default (the -Werror flag is passed to the C compiler,
making it treat any warnings as fatal errors). If you experience
problems building cURL, re-run "make config" in the ftp/curl
directory and disable the WERROR knob.
20100912:
AFFECTS: www/tdiary-devel, japanese/tdiary-devel
AUTHOR: tota@FreeBSD.org
The stable tDiary ports, www/tdiary and japanese/tdiary, have been
updated to 3.0.0. The development versions of tDiary have been merged
from www/tdiary-devel to www/tdiary and from japanese/tdiary-devel to
japanese/tdiary, respectively.
If you have been using the www/tdiary-devel or japanese/tdiary-devel,
you run one of the following commands to upgrade:
- www/tdiary-devel
# portmaster -o www/tdiary www/tdiary-devel
or
# portupgrade -o www/tdiary www/tdiary-devel
- japanese/tdiary-devel
# portmaster -o japanese/tdiary japanese/tdiary-devel
or
# portupgrade -o japanese/tdiary japanese/tdiary-devel
Before upgrading, please read the following for more details:
http://www.tdiary.org/20100828.html (written in Japanese)
20100907:
AFFECTS: sysutils/pecl-fileinfo
AUTHOR: ale@FreeBSD.org
If you are using php 5.3 (lang/php5) and fileinfo extension, you
should switch to sysutils/php5-fileinfo port:
portmaster -o sysutils/php5-fileinfo sysutils/pecl-fileinfo
20100904:
AFFECTS: net/netcat
AUTHOR: pgollucci@FreeBSD.org
Rename nc to netcat to prevent /usr/bin/nc shadowing /usr/local/bin/nc
20100902:
AFFECTS: users of KDE 4
AUTHOR: kde@FreeBSD.org
KDE SC ports has been updated to 4.5.1. A number of files were moved
between packages, manual intervention into update procedure is required:
# pkg_delete -f kdehier4\* kdelibs-4\* kdebase-4\* kdebase-runtime-4\* kdebase-workspace-4\*
# rm -rf /usr/local/kde4/share/PolicyKit/policy
# cd /usr/ports/misc/kdehier4 && make install clean
# portmaster -a
20100901:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 3.0.0. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20100817:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The modules mod_geoip and mod_h264_streaming have been moved into slave
ports: www/lighttpd-mod_geoip and www/lighttpd-mod_h264_streaming
20100818:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The default lighttpd configuration file locations have changed.
The main configuration file is now: $PREFIX/etc/lighttpd/lighttpd.conf
and includes other configuration files from $PREFIX/etc/lighttpd/
For compatibility with old-style configurations, if the lighttpd_conf
variable is not set in /etc/rc.conf, $PREFIX/etc/lighttpd.conf takes
precedence over $PREFIX/etc/lighttpd/lighttpd.conf
20100815:
AFFECTS: users of databases/redis and databases/redis-devel
AUTHOR: osa@FreeBSD.org
The redis configuration file, redis.conf, have been changed, some options
removed in newer versions (>=2.0). In some cases, redis-server with
older configuration might does not run at startup.
If you run into startup problems, re-edit configuration file.
20100813:
AFFECTS: www/opera
AUTHOR: dinoex@FreeBSD.org
If you run opera without gtk or kde4, the browser might crash on shutdown.
In this case go to about:config and change "Dialog Toolkit" from 0 to 4.
20100811:
AFFECTS: multimedia/mpeg4ip-libmp4v2
AUTHOR: makc@FreeBSD.org
multimedia/mpeg4ip-libmp4v2, which is not maintained upstream, has been
replaced with new port, multimedia/mp4v2. The shared library version
has been changed with this update, thus all ports that depends on
mp4v2 library must be rebuilt:
portmaster -o multimedia/mp4v2 multimedia/mpeg4ip-libmp4v2
portmaster -a
20100731:
AFFECTS: users of devel/ccache
AUTHOR: ehaupt@FreeBSD.org
Users upgrading from 2.4 release should clear the old cache directory with:
# ccache --clear
20100730:
AFFECTS: users of www/neon28 and www/neon29
AUTHOR: mezz@FreeBSD.org
Makes neon29 our default neon library in the ports tree. The www/neon28
has been removed and www/neon29's shared library version has been changed.
You will have to rebuild all ports that depend on www/neon29. Do this:
Portmaster users:
portmaster -o www/neon29 www/neon28
portmaster -r neon29-
Portupgrade users:
env DISABLE_CONFLICTS=1 portupgrade -o www/neon29 -f neon28-\*
pkgdb -Ff
portupgrade -rf neon29-\*
20100728:
AFFECTS: users of textproc/nltk
AUTHOR: clsung@FreeBSD.org
Nltk has been upgraded to 2.0b8 which depends on devel/py-yaml now.
You need to deinstall nltk before upgrading, since the previous port
will delete files installed from py-yaml during its deinstall phase.
Use, for example:
# pkg_delete nltk-2.0b7,1
# portsnap fetch update
# cd /usr/ports/textproc/nltk/
# make install clean
20100727:
AFFECTS: users of security/libgcrypt
AUTHOR: wxs@FreeBSD.org
libgcrypt has been upgraded to 1.4.6 which has a shared library version
bump. You need to reinstall all ports that depend on it. Use something
like this:
portupgrade -rf libgcrypt
portmaster -r libgcrypt
20100722:
AFFECTS: users of net/rabbitmq
AUTHOR: Phillip <pneumann@gmail.com>
The database schema and the format in which persistent messages are
stored have both changed since the last release (1.7.2). When
starting, the RabbitMQ server will detect the existence of an old
database and will move it to a backup location, before creating a
fresh, empty database, and will log a warning.
20100715:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.12 is out. If you want to switch to it from, for example
lang/perl5.10, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.12):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.12 -f perl-5.10.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.12 lang/perl5.10
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20100626:
AFFECTS: users of japanese/ibus-mozc
AUTHOR: daichi@FreeBSD.org
The japanese/ibus-mozc port has been updated to version 0.11.383.102,
and separated into 5 ports to cope with upcoming new port
japanese/scim-mozc.
o japanese/mozc-server
o japanese/mozc-tool
o japanese/mozc-additions
o japanese/ibus-mozc
o devel/py-gyp-devel
You cannot upgrade with portupgrade or portmaster. To upgrade, you
must deinstall japanese/ibus-mozc first and then install the new
japanese/ibus-mozc.
For example:
# pkg_delete ja-ibus-mozc-0.11.365.102_1
# portsnap fetch update
# cd /usr/ports/japanese/ibus-mozc/
# make install clean
20100617:
AFFECTS: users of security/{dirmngr|gnupg}
AUTHOR: dougb@FreeBSD.org
The security/libassuan port has been updated to version 2.0.0, and
the applications listed above have been updated to use it as of versions
1.1.0 and 2.0.15 respectively. If you HAVE NOT updated your libassuan
port as described in the 20100613 entry, you can simply update all 3
ports together (libassuan, dirmngr if installed, and gnupg) using your
normal upgrade path. If you HAVE updated to libassuan-1, then you need
to do the following before upgrading dirmngr and gnupg.
If you use portupgrade:
portupgrade -f -o security/libassuan security/libassuan-1
If you use portmaster:
portmaster -o security/libassuan libassuan-1
If you use neither:
pkg_delete -f libassuan*
Please note, libassuan version 2.0.0 is now a shared library, so unlike
the previous version it is now a runtime dependency and cannot be deleted
after you are done building dirmngr and/or gnupg.
20100613:
AFFECTS: users of deskutils/kdepim4, and security/{gpa|opensc}
AUTHOR: dougb@FreeBSD.org
The security/libassuan port has been updated to version 2.0.0, however,
the applications listed above are not yet compatible with it. Therefore
security/libassuan-1 has been created until they can be updated, and the
ports listed above have been updated to depend on it. You must first
replace your existing libassuan with version 1 in the new location, then
you can update the ports listed above normally.
If you use portupgrade:
portupgrade -f -o security/libassuan-1 security/libassuan
If you use portmaster:
portmaster -o security/libassuan-1 libassuan
If you use neither:
pkg_delete -f libassuan*
20100609:
AFFECTS: users of audio/libogg and audio/libao
AUTHOR: naddy@FreeBSD.org
There are new versions of libogg (1.2.0) and libao (1.0.0) and the
shared library versions have been bumped (ogg.6 to ogg.7, ao.3 to ao.4).
All ports that have an identifiable direct dependency on these libraries
have had their PORTREVISIONs bumped. However, some ports that pull in
the libraries indirectly may continue to look for the old versions. To
ensure that all are updated, perform this step:
If you use portupgrade:
portupgrade -rf libogg libao
If you use portmaster:
portmaster -r libogg libao
20100605:
AFFECTS: users of multimedia/gstreamer-plugins-good and
multimedia/gstreamer-plugins-bad
AUTHOR: kwm@FreeBSD.org
Certain plugins were moved from the -bad port to the -good port. Please
follow instructions below before proceeding with normal update steps:
If you use portmaster:
portmaster gstreamer-plugins-bad
If you use portupgrade:
portupgrade -R multimedia/gstreamer-plugins-bad
20100602:
AFFECTS: users of lang/mono
AUTHOR: romain@FreeBSD.org
Starting with Mono 2.6, the Moonlight compiler and assemblies are not
installed by the lang/mono port anymore. They are however provided by
the multimedia/moonlight port.
If you are doing some Silverlight development, install multimedia/moonlight
after updating lang/mono.
20100530:
AFFECTS: users of devel/gettext (i.e.: YOU)
AUTHOR: ade@FreeBSD.org
Another version of gettext (0.18), and another shared library version
bump (from intl.8 to intl.9), so:
All ports that have an identifiable known direct dependency on gettext
have had their PORTREVISIONs bumped. If after upgrading:
# portupgrade -rf gettext
# portmaster -w -r gettext
The upgrade of devel/gobject-introspection may fail because it is looking
for libintl.so.8. In this case, do the following:
# cd /usr/ports/devel/gobject-introspection
# make clean
# make deinstall
# make install clean
Then continue your upgrade procedure normally.
If there are still ports on your system that are looking for libintl.so.8
(either in ${LOCALBASE}/lib/compat/pkg, or non-existent), _please_ file
a PR so that a correct direct dependency can be added.
Once you are satisfied that no ports still depend on the old versions (such
as libgettextpo.so.4 and libintl.so.8) you can safely delete them from the
${LOCALBASE}/lib/compat/pkg directory if they are present there.
20100524:
AFFECTS: users of devel/darcs, ports-mgmt/porte, textproc/pandoc,
x11/xmobar, x11-wm/xmonad, x11-wm/xmonad-contrib
AUTHOR: pgj@FreeBSD.org
The following ports have been renamed to improve consistency among Haskell
Cabal ports:
- devel/darcs -> devel/hs-darcs
- ports-mgmt/porte -> ports-mgmt/hs-porte
- textproc/pandoc -> textproc/hs-pandoc
- x11/xmobar -> x11/hs-xmobar
- x11-wm/xmonad -> x11-wm/hs-xmonad
- x11-wm/xmonad-contrib -> x11-wm/hs-xmonad-contrib
Please follow these steps below to update Haskell ports that you have
installed:
1) Reinstall the renamed Haskell port dependencies (see previous entry).
Note that this will possibly require that you remove the affected leaf
(aforementioned) ports as well;
2) Reinstall the renamed application(s) you use.
20100524:
AFFECTS: users of hs-* ports
AUTHOR: pgj@FreeBSD.org
The following Haskell ports have been renamed in order to bring them in
sync with the naming scheme used at HackageDB. Please follow these steps
below to update your installation:
1) Delete the following ports (if you have any of them installed):
- hs-zip-archive-ghc
- hs-binary-ghc
- hs-language-c-ghc
- hs-lazysmallcheck-c-ghc
- hs-pcre-light-ghc
- hs-utf8-string-ghc
- hs-HGL-ghc
- hs-digest-ghc
- hs-haxml
- hs-highlighting-kate-ghc
- hs-polyparse-ghc
- hs-x11-ghc
- hs-x11-xft-ghc
- hs-opengl-ghc
- hs-OpenGLRaw-ghc
- hs-OpenGLURaw-ghc
- hs-glut-ghc
2) Rebuild the renamed ports and all ports that depend on them.
20100518:
AFFECTS: users of devel/pylint
AUTHOR: mva@FreeBSD.org
The pylint user configuration files have been changed slightly in newer
versions (>=0.20.0). In some cases, older configurations might crash
pylint at startup.
If you run into startup problems, make sure you remove the .pylintrc
configuration settings and the .pylint.d directory from your home
directory:
$ rm ~/.pylintrc
$ rm -rf ~/.pylint.d
20100518:
AFFECTS: users of devel/apr0, devel/apr1, www/apache20, www/apache22
AUTHOR: pgollucci@FreeBSD.org
devel/apr port has been renamed to devel/apr1.
WITH_APR_FROM_PORTS=yes for www/apache22 has been dissolved and may be
removed from your configuration files; devel/apr1 is always used now.
Please manually delete apache-2.\* if installed _before_ updating using
either portmaster or portupgrade:
pkg_delete -f apache-2.\*
Then, if you use portmaster:
portmaster -o devel/apr1 devel/apr
If you use portupgrade:
portupgrade -f -o devel/apr1 devel/apr
Finally, reinstall Apache port if you deleted it earlier and update ports as
usual (`XX' below is either 20 or 22):
portinstall www/apacheXX
20100512:
AFFECTS: users of www/apache20
AUTHOR: pgollucci@FreeBSD.org
The rc.d script has been renamed:
apache2.sh -> apache2
You'll need to update any crons wrappers, etc. for the new paths.
20100511:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated from 4.3.5 to 4.4.3. A number of libraries
was moved between packages. The recommended update procedure is to delete
kdelibs-experimental*, kdebase-4*, kdebase-workspace-4*,
kdebase-runtime-4*, kdepim-4*, kdepim-runtime-4*, and then update ports as
usual and install desired KDE 4 ports:
# pkg_delete -f kdebase-\*4\* kdepim-\*4\* kdelibs-experimental-\*4\*
# portmaster -a (or portupgrade -aR)
In order to enabled Nepomuk semantic desktop search you have to install
databases/virtuoso (you don't need to manually configure or run virtuoso
server).
20100511:
AFFECTS: users of textproc/redland RDF engine
AUTHOR: kde@FreeBSD.org
Redland RDF engine has been split into redland itself and rasqal engine.
The recommended update procedure is to delete redland, then update ports
as usual and install desired RDF ports:
# pkg_delete -f redland-\*
# portmaster raptor (or portupgrade -r raptor)
20100511:
AFFECTS: users of multimedia/qt4-phonon, multimedia/qt4-phonon-gst,
multimedia/phonon, and multimedia/phonon-gstreamer
AUTHOR: kde@FreeBSD.org
WITH_QT_PHONON global knob has been introduced to allow selection between
multimedia/qt4-phonon* ports (a bit outdated Phonon, which is shipped with
Qt 4) and multimedia/phonon* ports. Since KDE SC 4.4 now requires fresh
Phonon, multimedia/phonon* ports are installed by default.
If you don't use KDE, you may set WITH_QT_PHONON=yes in /etc/make.conf
and continue to use Qt 4 Phonon implementation ports.
If you want to use KDE SC 4.4 (or if you want the latest Phonon), do not
define WITH_QT_PHONON, delete multimedia/qt4-phonon* ports, and install
multimedia/phonon*:
If you use portmaster:
portmaster -o multimedia/phonon multimedia/qt4-phonon
portmaster -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
If you use portupgrade:
portupgrade -f -o multimedia/phonon multimedia/qt4-phonon
portupgrade -f -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
20100510:
AFFECTS: users of security/gnome-keyring
AUTHOR: kwm@FreeBSD.org
libgnome-keyring was split out of the gnome-keyring package. Perform the
following before doing your normal upgrade steps:
pkg_delete -f "gnome-keyring-*"
portmaster security/gnome-keyring
or
pkgdb -Ff
portupgrade -R -x gnome-keyring -x libgnome-keyring gnome-keyring
pkg_deinstall -fO gnome-keyring
portinstall security/gnome-keyring
20100506:
AFFECTS: users of mail/nullmailer on FreeBSD 6.X
AUTHOR: glarkin@FreeBSD.org
The nullmailer port was recently updated with an rc.d script to correctly
daemonize nullmailer-send with daemon(8). On FreeBSD 6.X, daemon(8) does
not support "[-u user]" command-line switch, causing the nullmailer rc.d
script failure to start nullmailer-send.
Support for "[-u user]" command-line switch was recently MFC'd to 6-STABLE
(http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/146266). FreeBSD 6.X users
should patch and install daemon(8) by one of the methods described below.
If /usr/src is not yet populated, csup the 6-STABLE sources and run these
commands:
cd /usr/src/usr.sbin/daemon
make install
/usr/local/etc/rc.d/nullmailer start
If /usr/src is already populated with sources from a previous 6.X release,
use these commands:
cd /usr/src/usr.sbin/daemon
fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.c'
fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.8'
patch -p0 daemon.c < patch-daemon.c
patch -p0 daemon.8 < patch-daemon.8
make install
/usr/local/etc/rc.d/nullmailer start
20100502:
AFFECTS: users of www/squid*
AUTHOR: miwi@FreeBSD.org
Starting with squid* the directory containing the default cache and log
directory was changed from $PREFIX/squid/ to /var/squid/.
The default values for the following Squid configuration parameters have
changed as shown below:
cache_log from $PREFIX/squid/logs/cache.log to /var/squid/logs/cache.log
cache_store_log from $PREFIX/squid/logs/store.log to /var/squid/logs/store.log
pid_filename from $PREFIX/squid/logs/squid.pid to /var/squid/logs/squid.pid
coredump_dir from $PREFIX/squid/cache to /var/squid/cache
Please check whether you need to define any of these variables in your
squid.conf to the old defaults explicitly before updating, especially if
you have set up automated log processing or automated log rotation. If you
define pid_filename in your squid.conf, you should also set squid_pidfile
to the same value in /etc/rc.conf, cf. $PREFIX/etc/rc.d/squid.
20100419:
AFFECTS: users of math/libgmp4
AUTHOR: ale@FreeBSD.org
The default gmp version in FreeBSD is now 5.0.x. The port directory
changed from math/libgmp4 to math/gmp. An entry has been added to MOVED
and all depending ports revisions have been bumped, so the update should
be handled correctly by usual port management tools such as portupgrade.
Portmaster users, please do the following before upgrading ports that
depend on gmp:
portmaster -o math/gmp math/libgmp4
20100409:
AFFECTS: users of lang/php5
AUTHOR: ale@FreeBSD.org
As of PHP 5.3, a few extensions were removed from or included into the core
PHP5 package. Follow the steps below to update your installation.
1) Delete the following packages (if installed):
- php5-dbase
- php5-ncurses
- php5-pcre
- php5-spl
- php5-ming
- php5-mhash
2) Rebuild lang/php5 and all ports that depend on it.
20100403:
AFFECTS: users of net/dgd
AUTHOR: glewis@FreeBSD.org
The kernel library has been separated from the main net/dgd port into its
own net/dgd-kernel port so that all libraries are on an equal footing.
This also reflects the split of the kernel library out from the main DGD
distribution.
If you wish to continue to use the kernel library you'll need to install
net/dgd-kernel after updating to dgd-1.4.1_2.
20100330:
AFFECTS: users of gstreamer-plugins-bad and gstreamer-plugins-good
AUTHOR: kwm@FreeBSD.org
Plugin moved from the -bad port to the -good port. Please follow the
instructions below before proceeding with normal update steps.
If you use portmaster:
portmaster gstreamer-plugins-bad
If you use portupgrade:
portupgrade -R multimedia/gstreamer-plugins-bad
20100328:
AFFECTS: users of graphics/png
AUTHOR: dinoex@FreeBSD.org
The PNG library has been updated to version 1.4.1. Please rebuild all
ports that depend on it.
If you use portmaster: make sure you update to portmaster version 2.20 or
newer, then do:
portmaster -r png-
If you use portupgrade:
portupgrade -fr graphics/png
20100221:
AFFECTS: users of rblibtorrent-devel
AUTHOR: dougb@FreeBSD.org
The port name has changed to libtorrent-rasterbar-14.
If you use portmaster:
portmaster -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel
If you use portupgrade:
portupgrade -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel
20100216:
AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client
AUTHOR: dvl@FreeBSD.org
Bacula 5.x uses new shared objects which conflict with the shared objects
from previous versions. You should delete all existing Bacula packages
from your system before compiling Bacula 5.x, otherwise you'll encounter
compilation errors.
/usr/local/etc/rc.d/bacula-dir stop
/usr/local/etc/rc.d/bacula-sd stop
/usr/local/etc/rc.d/bacula-fd stop
pkg_delete 'bacula-*'
After upgrading, remember to run the database upgrade script supplied
with the port.
20100214:
AFFECTS: users of japanese/roundcube
AUTHOR: nork@FreeBSD.org
If you switch mail/roundcube to japanese/roundcube, please re-check
configuration files like ${PREFIX}/www/roundcube/config/main.inc.php.
At least, please add following settings:
$rcmail_config['message_charset_languages'] = array('en_US' => 'ISO-8859-1', ...
$rcmail_config['transfer_encoding_languages'] = array('en_US' => 'quoted-printable', ...
See also: ${PREFIX}/www/roundcube/config/main.inc.php.dist
20100207:
AFFECTS: users of www/firefox
AUTHORS: beat@FreeBSD.org, mandree@FreeBSD.org (Java plugin)
The www/firefox port has been updated to 3.6. From now on www/firefox
will contain the most recent version of Firefox. Older but still
supported releases will be available in www/firefox3 and www/firefox35.
In order to update to Firefox 3.6 please delete your older installed
version of Firefox first and install www/firefox afterwards. Please
make sure all your addons are compatible with Firefox 3.6 and backup
your ~/.mozilla directory prior to the first launch of Firefox 3.6.
Note that in order to use Java with Firefox 3.6, you need to install
java/openjdk6, build it with the "WEB" option enabled and use the Iced
Tea plugin. To achieve the latter, each user needs to create a
symlink to the Icedtea plugin as described in the Browsers/Firefox and
Java[tm] Plugin section in the handbook:
ln -s /usr/local/openjdk6/jre/lib/IcedTeaPlugin.so \
$HOME/.mozilla/plugins
20100207:
AFFECTS: users of Mesa3D libraries and x11-drivers/xf86-video-nouveau
AUTHOR: nork@FreeBSD.org
If you want to use Mesa3D 7.6.1 and libdrm 2.4.17 rather than 7.4.4
and 2.4.12, you must define WITHOUT_NOUVEAU global macro, at least,
enabled on graphics/libGL*, graphics/libglut, graphics/dri,
graphics/mesa-demos, and graphics/libdrm. And please give up using
x11-drivers/xf86-video-nouveau.
At this time, I cannot enable latest Mesa3D and libdrm, because they
break xf86-video-nouveau. But old (current?) Mesa3D and libdrm do not
break any drivers.
AMD Radeon HD 2xxx/3xxx/4xxx users: If you use AMD Radeon HD [234]xxx
series, please define WITHOUT_NOUVEAU global macro. You can then use
OpenGL Hardware Accelerator feature on these series.
20100206:
AFFECTS: users of net/samba4-devel
AUTHOR: timur@FreeBSD.org
Default configuration file was moved to ${LOCALBASE}/etc/smb4.conf to
avoid conflicts with the installed net/samba3?. Also, userland utils
are not installed by default, which should also help with the parallel
setup of Samba3 and Samba4.
20100205:
AFFECTS: users of Qt 3 and KDE 3
AUTHOR: itetcu@FreeBSD.org
When building qt33 and kdelibs3 (at least), while they are installed,
because of -L/usr/local/lib being passed too soon, the currently installed
libraries are used instead of the ones from the build. This makes the
build fail if you updated any of the libraries these Qt/KDE libraries are
linked against (e.g. libjpeg).
For the moment the workaround, when you get to this, is to move the old lib
out of the way, e.g.:
mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old && \
cd /usr/ports/x11-toolkits/qt33/ && make && \
mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so && \
portmaster -C x11-toolkits/qt33 (or portupgrade -w qt-33\*) ...
20100205:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
Default version of Perl was bumped to 5.10.
If you already have lang/perl5.8 installed, and want to switch to
lang/perl5.10 please follow instructions in the entry 20090328 in this
file.
20100205:
AFFECTS: users of net/samba34
AUTHOR: timur@FreeBSD.org
This port was developed with the generous help of Florent Brodin.
The default passdb backend has been changed to `tdbsam'! That breaks
existing setups using the `smbpasswd' backend without explicit
declaration! Please use `passdb backend = smbpasswd' if you would like
to stick to the `smbpasswd' backend or convert your smbpasswd entries
using e.g. `pdbedit -i smbpasswd -e tdbsam'.
The `tdbsam' backend is much more flexible concerning per user
settings like `profile path' or `home directory' and there are some
commands which do not work with the `smbpasswd' backend at all.
20100130:
AFFECTS: users of audio/sdl_mixer and graphics/sdl_image
AUTHOR: mva@FreeBSD.org
The SDL_mixer and SDL_image libraries have new shared library versions.
Please rebuild all ports that depend on them.
If you use portmaster:
portmaster -r sdl_mixer-
portmaster -r sdl_image-
If you use portupgrade:
portupgrade -fr audio/sdl_mixer
portupgrade -fr graphics/sdl_image
20100125:
AFFECTS: users of audio/openal and graphics/openal-soft
AUTHOR: mva@FreeBSD.org
The default OpenAL implementation was switched to audio/openal-soft.
To update all ports correctly, the following steps have to be performed.
pkg_delete -f openal-\*
If you use portmaster:
portmaster -o audio/openal-soft audio/openal
portmaster -r audio/openal-soft
If you use portupgrade:
portupgrade -ro audio/openal audio/openal-soft
If you want to stick with audio/openal, please specify the following ports
make flag within /etc/make.conf (or an appropriate configuration file for
your ports):
WANT_OPENAL=si
20100122:
AFFECTS: users of sysutils/policykit and sysutils/polkit
AUTHOR: gnome@FreeBSD.org
Due to a recent change in sysutils/policykit, both sysutils/policykit,
and sysutils/polkit need to be rebuilt, but in a certain order. First,
upgrade sysutils/policykit to 0.9_6. Then, force rebuild and reinstall
of sysutils/polkit. If you do not do this, applications which depend
on polkitd will fail.
20100113:
AFFECTS: users of emulators/virtualbox
AUTHOR: beat@FreeBSD.org
Port has been renamed to emulators/virtualbox-ose to reflect that we are
using the OSE version. A separate port for the kernel modules has been
created: emulators/virtualbox-ose-kmod.
Please see http://wiki.freebsd.org/VirtualBox for update instructions.
20100107:
AFFECTS: users of security/openvpn*
AUTHOR: mandree@FreeBSD.org
security/openvpn has been moved to security/openvpn20 and upgraded to 2.0.9.
security/openvpn has been upgraded to 2.1.1, and security/openvpn-devel has
been removed.
Regular upgrades of the security/openvpn port should succeed without
manual intervention, but if you want to stick to openvpn 2.0 or if you
had been using openvpn-devel, manual intervention is needed, as
follows:
If you'd been using the security/openvpn-devel port, please use one of
these commands for upgrading:
portmaster -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel
portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel
If you want to stick to openvpn 2.0, please use one of these two
upgrade commands:
portmaster -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn
portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn
20100106:
AFFECTS: users of devel/websvn
AUTHOR: miwi@FreeBSD.org
The default install directory for websvn has changed from
${PREFIX}/www/data/websvn to ${PREFIX}/www/websvn.
If you are updating from a previous version, to preserve your settings
and data, please do the following:
mv /usr/local/www/data/websvn /usr/local/www
Then update as usual.
20091227:
AFFECTS: users of sysutils/grok
AUTHOR: Wesley Shields <wxs@FreeBSD.org>
The sysutils/grok port has been completely re-written. Configuration files
will need to be reviewed. Also, the RC script has been removed until it can
be made to work with the new version.
20091226:
AFFECTS: users of net-mgmt/ndoutils
AUTHOR: pgollucci@FreeBSD.org
When upgrading you'll need to run ./upgradedb; see UPGRADING file.
20091214:
AFFECTS: users of net/grdc
AUTHOR: avl@FreeBSD.org
Grdc has been renamed to Remmina upstream, and the port was also renamed
to reflect this. After installing remmina port you will need to download
the ``grdc2remmina.sh'' script and run it as your normal user(s) that
have ~/.grdc. The script will only create ~/.remmina directory and move
grdc config files to the new path; it does not affect anything else.
$ fetch http://people.freebsd.org/~avl/script/grdc2remmina.sh
$ sh grdc2remmina.sh
20091213:
AFFECTS: users of net-mgmt/zabbix, net-mgmt/zabbix-agent
AUTHOR: Jim Riggs <ports@christianserving.org>
In order to simplify configuration and better separate the different
components of Zabbix, the former zabbix port has been split into three:
zabbix-server, zabbix-proxy, and zabbix-frontend. Each component has
distinct functionality and may be installed independently on separate
systems. The existing zabbix-agent port remains.
Additionally, the new zabbix-frontend port now (correctly) installs the
PHP frontend in PREFIX/www/zabbix. The old zabbix port installed the
files in PREFIX/share/zabbix/php. Web server configurations must be
updated accordingly.
Finally, Zabbix has been updated to version 1.8. Not everyone may be
able to upgrade from version 1.6 immediately, though, so 1.6.8 versions
of the ports are also available as zabbix16-server, zabbix16-proxy,
zabbix16-agent, and zabbix16-frontend.
20091206:
AFFECTS: users of emulators/qemu
AUTHOR: nox@FreeBSD.org
The port has been updated to 0.11.1, which no longer enables kqemu by
default (if built with KQEMU knob on), now you also have to explicitly
pass -enable-kqemu (or -kernel-kqemu as with the previous versions)
if you want to use it. Also note the 0.11 stable branch is the last
qemu branch that still supports kqemu, so if you depend on reasonably
fast emulation on FreeBSD you should start looking for alternatives
some time soon. (VirtualBox?)
20091120:
AFFECTS: users of mail/postfixadmin
AUTHOR: Terry Sposato <tabmow@freenode.net>
Due to a bug in the previous postfixadmin port, existing users need to
backup their config.inc.php before they upgrade to postfixadmin-2.3 or
later and put it in place after the upgrade is complete.
20091120:
AFFECTS: users of security/f-prot
AUTHOR: Tim Bishop <tdb@FreeBSD.org>
The main f-prot command is now named fpscan. Virus definitions are
updated using the fpupdate command. fpupdate will automatically run
from periodic every day. To disable set the following option in
/etc/periodic.conf:
fpupdate_enable="NO"
The f-prot port now only works on i386.
20091118:
AFFECTS: users of java/jboss5
AUTHOR: Jonathan Chen <jonc@chen.org.nz>
The JBoss directory structure has been reorganised to follow hier(7)
guidelines more closely; in particular, transient and deployment files
were moved to /var/jboss5, thus allowing /usr to be read-only.
20091118:
AFFECTS: users of www/redmine
AUTHOR: Bernhard Froehlich <decke@bluelife.at>
After the upgrade you need to generate a session secret before restarting
the application. This is to protect you from cross-site request forgery.
From your Redmine directory, simply run the following command once:
# rake config/initializers/session_store.rb
then upgrade as usual:
# rake db:migrate RAILS_ENV=production
20091114:
AFFECTS: users of emulators/win4bsd
AUTHOR: Mario S F Ferreira <lioux@FreeBSD.org>
The new port now depends on emulators/kqemu-kmod instead of installing
its own version. Therefore, you should make sure that no other kqemu.ko
modules are installed:
# pkg_delete -f win4bsd\*
# rm -f /boot/kernel/kqemu.ko
# pkg_delete -f kqemu-kmod\*
# portinstall emulators/win4bsd
Do not forget to enable kqemu on rc.conf since win4bsd will not work
without it.
20091018:
AFFECTS: users of databases/mysql54-server
AUTHOR: Alex Dupre <ale@FreeBSD.org>
After the upgrade the server may fail to start due to changes in the
default values of innodb_log_files_in_group and innodb_log_file_size,
which differ from those in earlier 5.4 releases.
You should discard the old InnoDB log files and let MySQL 5.4.3 create
new ones. It is necessary to shut down your current server cleanly so
that no outstanding transaction information remains in the log.
See here: http://dev.mysql.com/doc/refman/5.4/en/news-5-4-3.html
20091014:
AFFECTS: users of mail/heirloom-mailx
AUTHOR: Alexander Logvinov <avl@FreeBSD.org>
Since SourceForge switched to the new File Release System,
mail/heirloom-mailx has wrong package name. All users who have
mail/heirloom-mailx installed after 22 August 2009 should run the
following commands:
# pkg_delete "\-mailx-12.4_1"
or
# rm -r /var/db/pkg/-mailx-12.4_1
# rm -r /var/db/ports/-mailx
# cd /usr/ports/mail/heirloom-mailx && make install clean
20090921:
AFFECTS: users of archivers/lzmautils, archivers/lzmautils-devel
AUTHOR: Christian Weisgerber <naddy@FreeBSD.org>
The XZ Utils distribution has superseded LZMA Utils, so the xz port has
been added and the lzmautils ports have been removed. To perform the
move, run one of the following commands:
If using portupgrade:
# portupgrade -o archivers/xz lzmautils\*
If using portmaster:
# portmaster -o archivers/xz archivers/lzmautils
or
# portmaster -o archivers/xz archivers/lzmautils-devel
as applicable.
20090919:
AFFECTS: users of mail/postfix-postfwd
AUTHOR: Sahil Tandon <sahil@tandon.net>
The recipient rate-limiting feature is now called via rcpt() command
instead of with mrcpt() as in previous versions. Make sure to update
your postfwd.conf if you use this feature.
20090917:
AFFECTS: users of www/epiphany, x11/yelp, graphics/librsvg2,
x11/toolkits/py-gnome-extras, and www/epiphany-extensions
AUTHOR: gnome@FreeBSD.org
The default Gecko provider has been changed from www/firefox to
www/libxul. Firefox 2.x is now marked FORBIDDEN for security reasons,
and libxul is new, stable, and preferred Gecko provider. Libxul uses
the same Gecko engine as Firefox 3.0.x.
Some ports may fail to upgrade or run when both www/firefox and libxul
are installed on the same system. To make sure everything runs smoothly,
uninstall www/firefox, then install libxul, then upgrade the affected
ports.
20090915:
AFFECTS: users of sysutils/gosa
AUTHOR: Denis Shaposhnikov <dsh@wizard.volgograd.ru>
Please read the following:
https://oss.gonicus.de/labs/gosa/wiki/DocumentationInstallingUpdatingGOsa
before upgrading this port. And don't forget to check your slapd.conf
because gosa scheme files were changed. Should you have any problems
during LDAP migration step, try to restart your PHP process.
20090913:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
In order to fix a performance bug, all wikis need to be rebuilt on
upgrade to version 3.1415926.
20090912:
AFFECTS: users of ports that have set USE_FORTRAN=yes
AUTHOR: gerald@FreeBSD.org
Ports that are built using the Fortran frontend of GCC (aka gfortran)
will now use lang/gcc44 as the default compiler.
20090911:
AFFECTS: users of lang/perl5.10
AUTHOR: skv@FreeBSD.org
lang/perl5.10 has been updated to 5.10.1. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.10. Please see its
manual page for details.
If you want to switch to lang/perl5.10 from lang/perl5.8 please follow
instructions in the entry 20090328 in this file.
20090910:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 2.3.4. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20090909:
AFFECTS: users of gstreamer-plugins-bad gstreamer-plugins-good
AUTHOR: kwm@FreeBSD.org
Due to the move of several plugins from gstreamer-plugins-bad to
gstreamer-plugins-good, it is necessary to update gstreamer-plugins-bad
first:
portupgrade -R gstreamer-plugins-bad
or, using portmaster:
portmaster gstreamer-plugins-bad
After this step, the normal upgrade procedure can be used.
20090831:
AFFECTS: users of emulators/linux-systemsimcell
AUTHOR: stast@bsdportal.ru
The port emulators/linux-systemsimcell has been updated to 3.1.25.
Systemsimcell emulator now has a new dependency: x11-toolkits/linux-f10-blt.
So you need to switch to linux-f10 ports in order to use 3.1.25 version.
20090828:
AFFECTS: users of mail/dovecot and mail/dovecot-sieve
AUTHOR: yds@CoolRat.org
dovecot-sieve has been updated to a new implementation compatible with
dovecot 1.2.x. For details of what this means please refer to:
http://wiki.dovecot.org/LDA/Sieve/Dovecot#Migration_from_CMUSieve
20090827:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.15.1 now. 1.14.1 version was preserved as
www/mediawiki114 port.
20090818:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
GnuTLS has been updated to 2.8.3 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
20090816:
AFFECTS: users of astro/celestia and KDE
AUTHOR: danfe@FreeBSD.org
Celestia can now be compiled with KDE 3 frontend (you can enable it with
CELESTIA_UI=kde when building). It is very feature-rich, as it offers
contextual menus, toolbars, KDE integration, internationalization,
bookmarks, etc. If you use Celestia and KDE as your desktop, you might
want to rebuild the port so it integrates into your environment better.
20090815:
AFFECTS: users of mail/dovecot
AUTHOR: wxs@FreeBSD.org
Dovecot has been updated to version 1.2.3. The configuration file has
changed significantly. Please see http://wiki.dovecot.org/Upgrading/1.2
for details of what this means.
20090804:
AFFECTS: users of multimedia/phonon*, x11/kdebase4*, deskutils/kdepim4
AUTHOR: kde@FreeBSD.org
KDE 4 has been updated to version 4.3.0. KDE now uses qt4-phonon;
multimedia/phonon and multimedia/phonon-gstreamer are deprecated in
favor of their qt4 equivalents. You can still use multimedia/phonon-xine
however. A number of files have been moved between packages. The
recommended update procedure is to delete phonon, phonon-gstreamer,
kdebase-*4*, kdepim-4*, then update ports as usual and install desired
KDE 4 ports:
# pkg_delete -f phonon-4\* phonon-gstreamer\* kdebase-\*4\* kdepim-4\*
# portmaster -a (or portupgrade -a)
# cd ${PORTSDIR}/x11/kde4 && make config && make install clean
20090804:
AFFECTS: users of devel/dbus-qt4, devel/qt4-designer
AUTHOR: kde@FreeBSD.org
Qt 4 ports have been updated to 4.5.2. The recommended update procedure
is to delete qt4-dbus and qt4-designer, then update ports as usual.
Install qt4-designer if needed.
20090802:
AFFECTS: users of devel/libtool15 and devel/libltdl15
AUTHOR: mezz@FreeBSD.org
The devel/libtool15 and devel/libltdl15 ports have been moved to libtool22
and libltdl22, respectively, then updated to 2.2.6a. You will need to run
portmaster or portupgrade to properly perform the upgrade:
If using portmaster:
portmaster -o devel/libtool22 devel/libtool15
portmaster -o devel/libltdl22 devel/libltdl15
If using portupgrade:
portupgrade -o devel/libtool22 libtool-1.5\*
portupgrade -o devel/libltdl22 libltdl-1.5\*
After that, you will need to rebuild all ports that depend on libltdl.
Since all dependent ports' PORTREVISIONs have been bumped, you can run
portupgrade or portmaster with `-a' option to complete the upgrade.
20090801:
AFFECTS: users of x11-drivers/xf86-video-nouveau
AUTHOR: rnoland@FreeBSD.org
An updated libdrm and xf86-video-nouveau have been committed. These
update the API version to 0.0.14 and if you are using DRM you will need
to update your kernel patch. See pkg-message in xf86-video-nouveau for
details.
20090730:
AFFECTS: users of www/tomcat6
AUTHOR: ale@FreeBSD.org
Tomcat has been updated to 6.0.20 release and the installation directory
is changed from apache-tomcat6.0 to apache-tomcat-6.0. Backup your
configuration files before updating Tomcat, since the previous port will
delete them on deinstall.
20090729:
AFFECTS: users of sysutils/heartbeat
AUTHOR: ports@encarnate.com
Heartbeat has been upgraded to the 2.1.4 release. Older configurations
based on version 1 should still work. Read more about the new features
and possible configuration changes at the following URLs:
http://clusterlabs.org/wiki/Documentation (Configuration 0.6 Explained)
http://www.linux-ha.org/GettingStartedRevisedV2
20090724:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 2.3.3. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20090720:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.17, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
or
# portmaster -r net/openldap24-client
20090719:
AFFECTS: users of graphics/jpeg
AUTHOR: dinoex@FreeBSD.org
The IJG jpeg library has been updated to version 7.0. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r jpeg-
Or, if you would prefer a more gradual approach:
portmaster -w jpeg- (Check the man page for more information)
If you use portupgrade:
portupgrade -fr graphics/jpeg
20090704:
AFFECTS: users of www/yaws
AUTHOR: olgeni@FreeBSD.org
The default configuration file path was changed to ${LOCALBASE}/etc/yaws
in version 1.83.
Please remember to update your configuration before upgrading.
20090628:
AFFECTS: users of www/firefox3-devel
AUTHOR: gecko@FreeBSD.org
If your Firefox crashes with the following message while viewing a
HTML5 page: "Bad system call (core dumped)" you need to load the sem
module (kldload sem).
To load sem module on every boot, put the following into your
/boot/loader.conf:
sem_load="YES"
20090624:
AFFECTS: users of mail/crm114
AUTHOR: glebius@cell.glebius.int.ru
The new version of crm uses a new format for css files. Old files should
be rebuilt or started from scratch. If not done, crm114 will lose any
mail processed via it.
20090620:
AFFECTS: users of gstreamer-plugins-bad, gstreamer-plugins-good, and
gstreamer-plugins-ugly ports
AUTHOR: kwm@FreeBSD.org
Due to the move of several plugins from gstreamer-plugins-bad to
gstreamer-plugins-good and gstreamer-plugins-ugly, it is necessary to
update gstreamer-plugins-bad first:
portupgrade -R gstreamer-plugins-bad
or, using portmaster:
portmaster gstreamer-plugins-bad
20090619:
AFFECTS: users of net-p2p/transmission-daemon
AUTHOR: mezz@FreeBSD.org
The UID/GID of transmission has been changed from 919 to 921. The data
configure has been changed from ${PREFIX}/etc/transmission/home/.config
to ${PREFIX}/etc/transmission/home. To update the UID/GID:
# pw groupmod transmission -g 921
# pw usermod transmission -u 921 -g 921
20090618:
AFFECTS: users of www/p5-Catalyst
AUTHOR: pgollucci@FreeBSD.org
Most applications and plugins should run unaltered on Catalyst 5.80.
However, a lot of refactoring work has taken place, and several changes
have been made which could cause incompatibilities. If your application
or plugin is using deprecated code, or relying on side effects, then you
could have issues upgrading to this release.
http://search.cpan.org/~mramberg/Catalyst-Runtime-5.80005/lib/Catalyst/Upgrading.pod
20090617:
AFFECTS: users of emulators/virtualbox
AUTHOR: beat@FreeBSD.org
The GID of virtualbox has changed due to a conflict with databases/couchdb.
Update GID of vboxusers after updating the port:
# pw groupmod vboxusers -g 920
20090617:
AFFECTS: users of math/fftw3 math/fftw3-long math/fftw3-float
AUTHOR: db@FreeBSD.org
The Fortran option has removed from fftw3 and moved into slave ports,
math/fftw3-fortran math/fftw3-long-fortran and math/fftw3-float-fortran.
20090615:
AFFECTS: users of x11-wm/enlightenment and x11-wm/enlightenment-devel
AUTHOR: gahr@FreeBSD.org
The development version of the Enlightenment window manager, a.k.a. E17,
was moved from x11-wm/enlightenment-devel to x11-wm/enlightenment. The
DR16 branch now resides in x11-wm/e16.
20090615:
AFFECTS: users of multimedia/mlt++
AUTHOR: beat@FreeBSD.org
The multimedia/mlt++ port was incorporated into multimedia/mlt since
version 0.4.2. Delete multimedia/mlt++ first and then install/update
multimedia/mlt.
20090613:
AFFECTS: users of www/hudson
AUTHOR: hq@FreeBSD.org
Hudson is now running as a standalone process and no longer relies on
Apache Tomcat. As such, it should now be configured by defining
hudson_* variables in rc.conf. See comments from rc.d script for further
details.
The default setup is using the same port numbers and HTTP URL prefix as
before in order to reduce the effort of upgrading the port. Hence, it
may conflict with some running Apache Tomcat instance. To fix this
problem, you may either deinstall www/tomcat6, or use the following
settings in hudson_args from /etc/rc.conf:
--httpPort=??? --ajp13Port=???
20090611:
AFFECTS: users of www/apache22
AUTHOR: pgollucci@FreeBSD.org
Two rc.d scripts have been renamed:
apache22.sh -> apache22
htcacheclean.sh -> htcacheclean
You'll need to update any crons wrappers, etc. for the new paths.
20090608:
AFFECTS: users of lang/python* and py-*
AUTHOR: miwi@FreeBSD.org
The default version of Python has been changed from 2.5.x to 2.6.x.
If you have 2.5.x installed, perform an upgrade of lang/python25 to
lang/python26 with one of the following commands:
If using portupgrade:
# portupgrade -o lang/python26 lang/python25
If using portmaster:
# portmaster -o lang/python26 lang/python25
If you want to retain 2.5.x as default Python version, set the
PYTHON_DEFAULT_VERSION variable to 'python2.5' (without quotes) in
/etc/make.conf, then go to lang/python and perform the following
command:
# portupgrade -R python
Once the installed Python has been updated to 2.6, by using the
method above, it is required to run the upgrade-site-packages target in
lang/python to assure that site-packages are made available to the new
Python version.
If using portupgrade:
# cd /usr/ports/lang/python && make upgrade-site-packages
If using portmaster:
# cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
The portmaster case can take quite some time to complete due to the lack of
cached information that the portupgrade suite uses (specifically pkg_which).
This is not the fault of portmaster.
20090606:
AFFECTS: users of java/eclipse
AUTHOR: glewis@FreeBSD.org
The update to 3.4.2 changes the location of the metadata for eclipse to
be more in line with what is used on other platforms. This means that
after the update plugins that have been installed by a user with the
built in Update Manager will need to be reinstalled.
20090605:
AFFECTS: users of mail/postfix
AUTHOR: itetcu@FreeBSD.org
Version 2.6.1 introduced a POLA violation by expecting aliases.db to be
in /etc/mail/aliases.db (not /etc/aliases.db). With this version the
location is reverted to the right place.
If you updated your installation to 2.6.1 you need to run newaliases(1)
again after you installed 2.6.2.
20090603:
AFFECTS: users of japanese/font-mplus-ipa (and old japanese/ipa-ttfonts)
AUTHOR: hrs@FreeBSD.org
IPAUIGothic has been updated to a version included in IPA font
version 002.03 and added as a separated port
"japanese/font-ipa-uigothic". And the font-mplus-ipa has been
updated to remove the old IPAUIGothic.
Thus the old ipa-ttfonts is almost equivalent to font-ipa +
font-ipa-uigothic + font-mplus-ipa. Note that these three packages
have different licenses from each other.
20090601:
AFFECTS: users of devel/cvs-devel
AUTHOR: wxs@FreeBSD.org
cvs-devel no longer installs /bin/cvs and /bin/cvsbug. These are now
installed into ${PREFIX}/bin. If you wish to use these please be aware
of this change with respect to your path.
20090531:
AFFECTS: users of devel/viewvc
AUTHOR: pgollucci@FreeBSD.org
viewvc.conf and templates are not compatible to 1.0.x version, even the
database scripts have changed. For details see:
http://viewvc.tigris.org/source/browse/*checkout*/viewvc/trunk/docs/upgrading-howto.html
20090530:
AFFECTS: users of Japanese and Chinese fonts
AUTHOR: hrs@FreeBSD.org
Ports for Japanese fonts have been reorganized in the following way:
japanese/ipa-ttfonts -> japanese/font-mplus-ipa
japanese/ipa-ttfonts -> japanese/font-ipa
japanese/kochi-ttfonts -> japanese/font-kochi
japanese/mplusfonts -> japanese/font-mplus
japanese/sazanami-ttf -> japanese/font-sazanami
japanese/shinonome -> japanese/font-shinonome
japanese/umefont -> japanese/font-ume
japanese/vlgothic -> japanese/font-vlgothic
While basically these are port name changes for consistency,
installation directories are also changed:
font files -> ${PREFIX}/share/${PORTNAME}/*
symlinks -> ${PREFIX}/share/fonts/{TTF,OTF,fontname,...}/*
symlinks -> ${PREFIX}/lib/X11/fonts/{TTF,OTF,misc,fontname,...}/*
A user-visible one is that the directory name "TrueType" is replaced
with "TTF".
Also, japanese/font-std and chinese/font-std have been added as
standard fonts used in the Ports Collection. Currently they
contain:
std.ja_JP/Mincho
std.ja_JP/Gothic
std.ja_JP/Ryumin-Light
std.ja_JP/GothicBBB-Medium
std.zh_CN/STHeiti-Regular
std.zh_CN/STSong-Light
std.zh_CN/MSung-Light
std.zh_CN/MHei-Medium
under ${PREFIX}/share/fonts/. They are just symlinks to
corresponding font files. The symlink names are based on popular
PostScript font names.
Applications should refer the font files via XLFD or fontconfig
first. If they need a direct reference to the font file, please use
files in std.*/*. This is because direct reference to a specific
font name in an application configuration file makes the maintenance
difficult when the font file name is changed, for example.
20090516:
AFFECTS: users of devel/viewvc
AUTHOR: pgollucci@FreeBSD.org
OPTION APACHE2 has been changed to APACHE (WITH_APACHE)
WITH_APACHE2 is deprecated and is being removed.
APACHE_PORT will be pulled in when WITH_APACHE is selected
20090516:
AFFECTS: users of print/cups-base and portupgrade
AUTHOR: dinoex@FreeBSD.org
The print/cups port has been split into multiple ports. If upgrading
from 1.3.10_1 and below, you must remove the installed version first.
20090412:
AFFECTS: users of sysutils/bacula-server
AUTHOR: wxs@FreeBSD.org
sysutils/bacula-server now uses a new catalog format. If upgrading
from the old version please use the update_bacula_tables script
provided with the port before restarting bacula.
20090410:
AFFECTS: users of www/trac-email2trac
AUTHOR: brooks@FreeBSD.org
bin/email2trac.py and bin/delete_spam.py are now installed without the
.py extension to make the suid run_email2trac work and match the online
documentation. If you were using them in scripts or alias entries, you
will need to update paths accordingly.
20090401:
AFFECTS: users of Fedora 8 Linux infrastructure ports
AUTHOR: bsam@FreeBSD.org
ATTENTION! Those ports are not default for any version of FreeBSD for now
and may be used with FreeBSD versions 7.2 and above (8-CURRENT is better)
using compat.linux.osrelease=2.6.16 and linux_base-f8. Please, note that
2.6.16 is not fully supported on 7.x (ex., some syscalls are missing
and cannot be MFCed due to a native FreeBSD ABI breakage).
For more information about transition please read item "20070327: AFFECTS:
users of emulators/linux_base-fc6". That note may be used for upgrading
to linux_base-f8 and Fedora 8 Linux infrastructure ports as well.
If you want to switch to linux-f8 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f8
OVERRIDE_LINUX_NONBASE_PORTS=f8
20090328:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.10 is out. If you want to switch to it from, for example
lang/perl5.8, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.10):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.10 -f perl-5.8.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
env DISABLE_CONFLICTS=1 portmaster -o lang/perl5.10 lang/perl5.8
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20090327:
AFFECTS: users of security/clamav
AUTHOR: garga@FreeBSD.org
After version 0.95 clamav-milter does not accept parameters by command
line. If you are using $clamav_milter_flags on rc.conf to set its
parameters you will need to move to new ${PREFIX}/etc/clamav-milter.conf.
20090319:
AFFECTS: users of shells/bash3
AUTHOR: ehaupt@FreeBSD.org
With the addition of shells/bash version 4.x, people wanting to stick
with bash 3.x should perform the following update:
$ portupgrade -f -o shells/bash3 bash
20090318:
AFFECTS: users of www/suphp
AUTHOR: yzlin@cs.nctu.edu.tw
The suPHP port has been upgraded to 0.7.x. This new version of suPHP has
some new features and changes for the configuration file:
- Multiple path (with patterns) & variable substitution support for
docroots
- Double-quoted strings at section '[handlers]'
ex. application/x-httpd-php="php:/usr/local/bin/php-cgi"
These changes may lead to internal server error if without modifications
of the configuration file from previous version.
20090316:
AFFECTS: users of www/geeklog
AUTHOR: beat@FreeBSD.org
To follow the standards this port has received a small reworking.
WWW_DIR (that defaulted to PREFIX/www/data/geeklog) is deprecated,
use WWWDIR (defaults to PREFIX/www/geeklog).
20090316:
AFFECTS: users of net-im/ejabberd
AUTHOR: skylord@linkline.ru
ejabberd's UID and GID have changed (PR ports/105122). Users are advised
to check all configuration files and data in /var/spool/ejabberd to
ensure everything has the correct owner/group.
20090316:
AFFECTS: users of sysutils/lire
AUTHOR: edwin@FreeBSD.org
Lire now requires DBD::SQLite, which uses SQLite 3.0. This means that the
Lire database format has changed. If you have one or more old Lire stores,
you will need to convert each of them from SQLite2 format to SQLite3 like
this:
$ sqlite oldstore.db .dump | sqlite3 newstore.db
This assumes that you have both SQLite2 and SQLite3 installed on your
system, and that the names of the command line interface for the old and
new version are `sqlite' and `sqlite3' respectively (this is at least
correct for Fedora).
20090310:
AFFECTS: users of multimedia/mythtv
AUTHOR: glarkin@FreeBSD.org
The upgrade from version 0.20 to version 0.21 should be transparent.
Any changes to the database structure should be applied automatically.
However, it is strongly recommended that you back up your database before
installing a new version of MythTV.
For example:
$ mysqldump -u mythtv -pmythtv mythconverg -c > mythtv_backup.sql
To restore (assuming that you've dropped the database):
$ mysql -u root
mysql>create database mythconverg;
mysql>exit
$ mysql -u mythtv -pmythtv mythconverg < mythtv_backup.sql
20090309:
AFFECTS: users of devel/libusb on CURRENT
AUTHOR: stas@FreeBSD.org
FreeBSD libusb20 was renamed to libusb in r189585 and thus, being fully
compatible with libusb20, replaces devel/libusb on HEAD. devel/libusb
should not be used on these systems. Users of libusb-dependent ports
are advised to remove libusb package from their systems, and rebuild all
libusb dependencies. One of the possible ways to achieve this is
listed below:
# set tempfile=`mktemp /tmp/usbports.XX`
# pkg_info -qR /var/db/pkg/libusb-* > ${tempfile}
# pkg_delete -f /var/db/pkg/libusb-*
# cat ${tempfile} | xargs portupgrade -f
# rm -f ${tempfile}
20090309:
AFFECTS: users of multimedia/phonon
AUTHOR: kde@FreeBSD.org
multimedia/phonon port has been split into phonon itself, phonon-xine,
and phonon-gstreamer backends. After updating phonon port you have
to install at least one backend; phonon-xine backend is recommended
for KDE.
20090308:
AFFECTS: users of emulators/qemu
AUTHOR: nox@FreeBSD.org
The port has been updated to 0.10.0, which now uses the newer
(incompatible) kqemu-kmod-devel port that now also works for the
32 bit "qemu" executable on amd64. If you upgrade emulators/qemu
with the KQEMU knob on, you have to
# pkg_delete kqemu-kmod-1\*
the old kqemu version first if it is installed.
20090304:
AFFECTS: users of comms/py-gammu
AUTHOR: bsam@FreeBSD.org
The port comms/py-gammu was incorporated into comms/gammu since
1.23.0. Delete comms/py-gammu first and then deinstall/reinstall
comms/gammu with option WITH_PYTHON_GAMMU=YES.
20090304:
AFFECTS: users of x11-wm/xfce4
AUTHOR: oliver@FreeBSD.org
When upgrading from Xfce 4.4 to 4.6 make sure you uninstall the following
ports:
x11/libxfce4mcs
sysutils/xfce4-mcs-manager
sysutils/xfce4-mcs-plugins
x11-themes/xfce4-icon-theme
You may uninstall them before you start the upgrade procedure (preferred)
or even afterwards when the upgrade went fine.
Please also note that Xfce 4.6 does not come with an icon theme any more.
Xfce 4.6 now depends on the Tango theme which is now installed by default.
The default installation of Xfce is also adjusted to use this icon theme
instead of the Xfce 4.4 standard Rodent theme. If you are upgrading from
Xfce 4.4 to 4.6 you probably still have the Rodent theme selected. This
will lead to several "missing" icons when starting up Xfce.
Make sure to switch as well to the Tango theme. To do this just open the
Settings Manager and select Appearance. Inside the Appearance dialog
switch to the Icons tab and select the "Tango" entry in the list on the
left side of the Icons tab.
For enabling the Reboot/Shutdown functionality of Xfce's logout dialog
please read the note which gets printed out after the installation of
x11-wm/xfce4 about how to configure PolicyKit.
20090223:
AFFECTS: users of Tcl/Tk
AUTHOR: mm@FreeBSD.org
The default version of Tcl/Tk has been changed from 8.4 to 8.5.
To restore old behavior and prefer using Tcl 8.4 with supported ports set
WITH_TCL_VER=84 in /etc/make.conf. This has no effect on ports that have
USE_TCL=yes or USE_TK=yes. They stick to the new default version and have
to be updated by their maintainers to support other versions than default.
20090218:
AFFECTS: users of www/zend-framework
AUTHOR: glarkin@FreeBSD.org
A local file inclusion (LFI) vulnerability was fixed in Zend Framework
1.7.5. The LFI was present in the Zend_View::render() method, and
allowed inclusion of scripts with relative path names, e.g.
"../../../my/script/dir/myscript.php".
If the script path name is hard-coded into the application and is not
generated by user input, the vulnerability does not apply. Because of
this exception, the Zend Framework team has added a flag to disable
the LFI protection in the render() method.
Full details of the vulnerability, whether it applies to your
application and how to disable the LFI protection in the render()
method can be found here:
http://framework.zend.com/manual/en/zend.view.migration.html
20090216:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.14, which requires a shared library
version bump. Therefore you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
20090209:
AFFECTS: users of multimedia/phonon, x11/kdelibs4, x11/kdebase4*,
deskutils/kdepimlib4, deskutils/kdepim4, devel/automoc4
AUTHOR: kde@FreeBSD.org
KDE 4 has been updated from 4.1.4 to 4.2.0. A number of applications
have been moved between packages. The easiest way to avoid various
problems during update is to delete all KDE-4.1.4 ports and install
KDE-4.2.0:
# pkg_delete -f kde\*4.1.4\* automoc4-\*
# portmaster -a (or portupgrade -a)
# cd ${PORTSDIR}/x11/kde4 && make config && make install clean
20090207:
AFFECTS: users of devel/libslang and devel/libslang2
AUTHOR: pgollucci@FreeBSD.org
devel/libslang has been removed in favor of devel/libslang2 after not
being released during last five years. WITH_SLANG2 is no longer a
valid ports KNOB. All ports that depend on devel/libslang should be
recompiled, e.g.:
# portupgrade -o devel/libslang2 devel/libslang
20090130:
AFFECTS: users of www/httptunnel
AUTHOR: rafan@FreeBSD.org
The startup script has been converted to new rc.d style and split
into two scripts: htc (client) and hts (server). Please check the scripts
for how to set variables in /etc/rc.conf.
20090127:
AFFECTS: users of gstreamer-plugins
AUTHOR: kwm@FreeBSD.org
The gstapp library moved from the gstreamer-plugins-bad package to
gstreamer-plugins. It will be necessary to rebuild the gstreamer-plugins
port. After updating your installed ports please do (if you are using
portupgrade):
# portupgrade -f gstreamer-plugins
20090127:
AFFECTS: users of www/xpi-deepestsender
AUTHOR: pgollucci@FreeBSD.org
www/xpi-deepestsender has been updated to version 0.9.0. This version
is *only* for Firefox version 3.x.
20090124:
AFFECTS: users of x11-servers/xorg-server, sysutils/hal
AUTHOR: rnoland@FreeBSD.org
sysutils/hal has been updated and should now properly detect mice for
in X.Org. Use of AllowEmptyInput should no longer be needed for most
users and moused should now work fine.
20090123:
AFFECTS: users of x11-servers/xorg-server
AUTHOR: rnoland@FreeBSD.org
If you are using an older xorg.conf several config lines are no longer
needed and will generate warnings when X is started. RgbPath will cause
X to fail to start, remove it from your config.
Server 1.5.3 also really wants to configure its input devices via hald.
This is causing some issues with moused and /dev/sysmouse. There are
couple of options for how to deal with it:
1. Add Option "AllowEmptyInput" "off" to your ServerLayout section.
This will cause X to use the configured kbd, mouse, and vmmouse
sections from your xorg.conf
2. Don't use moused. If you want it to work with addon USB mice
set this in rc.conf:
moused_enable="NO"
moused_nondefault_enable="NO"
I'm working on fixing hald or the mouse driver or both.
20090123:
AFFECTS: users of x11/libxcb
AUTHOR: flz@FreeBSD.org
Libxcb shared library version was bumped from 1 to 2. You need to
rebuild any consumer of libxcb.so.1 or some applications will be
linked against two versions of libxcb once libX11 is upgraded.
For portupgrade users:
# portupgrade -rf libxcb
20090121:
AFFECTS: users of devel/linux-glib2, emulation/linux_base-f4
AUTHOR: bsam@FreeBSD.org
Glib2 now is incorporated to emulation/linux_base-fc4 (it has always
been a part of more recent Linux base ports). All users should deinstall
devel/linux-glib2 and then deinstall/reinstall emulation/linux_base-f4.
20090119:
AFFECTS: users of mail/claws-mail, mail/claws-mail-smime
AUTHOR: netchild@FreeBSD.org
The claws-mail port includes the S/MIME plugin itself now, it is not
distributed as a separate plugin anymore. It can be enabled with the
GPGME option in the port (disabled by default). If you use the S/MIME
plugin, you should remove the mail/claws-mail-smime port before
enabling GPGME and updating the mail/claws-mail port. People which
already updated mail/claws-mail with GPGME enabled and a non-working
S/MIME plugin need to deinstall mail/claws-mail-smime and reinstall
mail/claws-mail.
20090118:
AFFECTS: users of net-p2p/deluge
AUTHOR: mezz@FreeBSD.org
The Deluge has been updated from 0.5.x to 1.x. The 1.x has been rewritten,
so it is recommend for you to make the back up of your ~/.config/deluge. The
configuration and plugins of 0.5.x do not work in 1.x. Deluge will picking
up the old configuration and try to convert it to the newer format, but I
wouldn't trust it to do it without the back up.
If you prefer to stick with 0.5.x, you can use portmaster:
# portmaster -o net-p2p/deluge05 net-p2p/deluge
or if you use portupgrade:
# portupgrade -o net-p2p/deluge05 net-p2p/deluge
20090118:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
IkiWiki has been upgraded from 2.x to 3.x. Instructions for
migrating existing IkiWiki configurations to 3.x format can be found
at http://ikiwiki.info/tips/upgrade_to_3.0/.
20090118:
AFFECTS: users of devel/apr-svn devel/apr
AUTHOR: pgollucci@FreeBSD.org
devel/apr-svn has been removed and devel/apr now handles its role.
devel/apr now defaults to building with Berkeley database support (bdb)
APR_UTIL_* tunables have been renamed to comply with ports/KNOBS names.
20090114:
AFFECTS: users of x11/kdebase4-workspace, x11/kdebase4-runtime
AUTHOR: kde@FreeBSD.org
KDE 4 has been updated from 4.1.1 to 4.1.4. A number of files have been
moved between packages. You should deinstall kdebase4-runtime package
before updating:
pkg_delete -f kdebase-runtime-4.1\*
portmaster -a
After successful update you could install kdebase4-runtime if it has not
been installed during update process.
20090114:
AFFECTS: users of GNOME and GTK+
AUTHOR: gnome@FreeBSD.org
GNOME has been updated to 2.24.x. You have to deinstall a few ports
first before using portupgrade or portmaster in order to successfully
upgrade your GNOME installation. After successful upgrade, you have
to reinstall gnome-session so the gnome.desktop session file is properly
installed.
Portupgrade users:
# pkgdb -Ff
(Answer "yes" to unregister gail while keeping gtk20.)
(Answer "yes" to unregister fast-user-switch-applet while
keeping gdm.)
# pkg_deinstall -fO gtkmm-2.12\*
# portupgrade -aOW
# portupgrade -f gnome-session
Portmaster users:
# pkg_delete -f gtkmm-2.12\*
# portmaster -a
# portmaster gnome-session
20090113:
AFFECTS: users of lang/perl5.8
AUTHOR: skv@FreeBSD.org
lang/perl5.8 has been updated to 5.8.9. You should update everything
that depends on perl. The easiest way to do that is to use
perl-after-upgrade script supplied with lang/perl5.8. Please see its
manual page for details.
20090112:
AFFECTS: users of mail/claws-mail*
AUTHOR: miwi@FreeBSD.org
claws-mail has been updated to 3.7.0, with this update OpenSSL support
has been removed by upstream in favour of GnuTLS. GnuTLS is now enabled
by default. Themes were have also been split to an extra port which
your can find under x11-themes/claws-mail-themes. Menu was rewritten
entirely in version 3.6.0 using modern GTK interface; as a consequence,
all your custom shortcuts will be lost after upgrade.
20090109:
AFFECTS: users of any Mozilla and Opera products
AUTHOR: mezz@FreeBSD.org
The Java plugins now will no longer be picked up by automatically from
these browsers. Because all Java ports share the name of plugins file,
I am thinking about someone or maybe me will need to write something
similar to nspluginwrapper (but in shell script) that can add Java plugin
in ~/.*/plugins/ when user requests one specific version of Java plugin
if this user has more than one version of Java installed. However, for
now, you will have to add Java plugin in ~/.*/plugins/ manually.
20090107:
AFFECTS: users of databases/unixODBC
AUTHOR: beech@FreeBSD.org
The databases/unixODBC port has been updated to 2.2.14. While
containing many bug fixes and minor feature adjustments, this version
no longer ships with the (obsolete) MySQL ODBC driver. MySQL ODBC
driver users will probably want to use databases/mysql-connector-odbc
instead. The text-backed/flatfile driver (libtxtodbc) has also been
removed by the developers but due to some demand may make a return in
a future version or as a separate port.
20090107:
AFFECTS: users of security/libgcrypt
AUTHOR: rafan@FreeBSD.org
libgcrypt has been upgraded to 1.4.3 which has a shared library version
bump. You need to reinstall all ports that depend on it. Use something
like this:
portupgrade -rf libgcrypt
portmaster -r libgcrypt
20090104:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.13, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
20081230:
AFFECTS: users of net/rabbitmq
AUTHOR: pneumann@gmail.com
The database schema has changed between RabbitMQ-1.4.0 and this release.
When the RabbitMQ server detects the presence of an old database, it
moves it to a backup location, creates a fresh, empty database, and
logs a warning.
20081226:
AFFECTS: users of www/rt38
AUTHOR: pgollucci@FreeBSD.org
www/rt38 now respects the FreeBSD directory layout, see hier(7).
With this change, p5-RT-* and p5-RTx-* should be much simpler to use
in the ports collection.
Please note that www/p5-RTx-Shredder is included in www/rt38. This
port will be deprecated and removed.
20081228:
AFFECTS: users of astro/boinc-setiathome-enhanced
AUTHOR: rene@FreeBSD.org
The setiathome client has been updated to version 6.03 and version 5.00
of the astropulse client has been added. Before you update, finish and
report your current workunits to avoid losing them. The port now also
includes the client screensavers.
20081228:
AFFECTS: users of japanese/kinput2
AUTHOR: hrs@FreeBSD.org
The Wnn backend of japanese/kinput2 port now uses unix domain socket
to communicate the server by default. If $JSERVER environment
variable is defined, the value is used as the server host name. In
In short, the server name is determined in the following way:
$JSERVER --(if null)--> CcWnn.Jserver --(if null)--> "localhost"
If the server host name is null or matches "^unix$", unix domain
socket is used. Note that the default server name in CcWnn.Jserver
is "unix" now.
20081226:
AFFECTS: users of www/rt*
AUTHOR: pgollucci@FreeBSD.org
www/rt2 www/rt3 www/rt32 www/rt34 are now deprecated and will expire
2009-02-01. All ports now depend on www/rt38 If you cannot update
to www/rt38, www/rt36 is still around.
20081224:
AFFECTS: users of www/phpSysInfo
AUTHOR: miwi@FreeBSD.org
The www/phpSysInfo port has been split into www/phpsysinfo and
www/phpsysinfo-dev ports.
20081217:
AFFECTS: users of mail/policyd2
AUTHOR: wxs@FreeBSD.org
The RC script for mail/policyd2 has been renamed to avoid a conflict.
If you use this port please change the setting in rc.conf to be
policyd2_enable.
20081211:
AFFECTS: users of lang/php5
AUTHOR: pav@FreeBSD.org, itetcu@FreeBSD.org, ale@FreeBSD.org
As of PHP 5.2.7, pcre extension is distributed with the core PHP5 package,
and not as a standalone module anymore. Follow the steps below to update
your installation.
Portupgrade users:
pkg_delete -f php5-pcre-5.2.6
pkgdb -F
portupgrade as usual
Portmaster users:
pkg_delete -f php5-pcre\*
portmaster php5
If you are using pecl ports you might need to force an update on them:
portupgrade -f pecl\*
or
portmaster pecl
If you have the pecl hash, json and/or zip extensions you need to replace
them with the PHP5 bundled ones, e.g.:
portmaster/portupgrade -o archivers/php5-zip archivers/pecl-zip
portmaster/portupgrade -o devel/php5-json devel/pecl-json
portmaster/portupgrade -o security/php5-hash security/pecl-hash
If you build your INDEX locally and you tried to build it after the PHP
update commit, you need to rebuild it _after_ you updated lang/php5:
cd /usr/ports && make index
or (if you use ports-mgmt/p5-FreeBSD-Portindex):
cd /usr/ports && cache-init && portindex -o `make -V INDEXFILE`
20081207:
AFFECTS: users of games/mkgichessclub
AUTHOR: nivit@FreeBSD.org
After the update to the version 2.2.0, please, alter the SQL tables
with the command:
mysql _mkgichessclub_ < /usr/local/share/mkgichessclub/db_migrate_2.1_to_2.2.sql
where _mkgichessclub_ is the database name chosen during the installation
of the port.
20081205:
AFFECTS: users of net-p2p/ktorrent
AUTHOR: makc@FreeBSD.org
ktorrent has been updated to 3.1.5 for KDE 4. The last release of ktorrent
for KDE 3 is available under net-p2p/ktorrent2.
20081121:
AFFECTS: users of comms/smstools3
AUTHOR: mm@FreeBSD.org
The startup script of comms/smstools3 has changed. For increased security
smstools now runs as user uucp / group dialer by default. The script
commands like sendsms etc. should be executed as user uucp.
To restore the old behaviour, set smsd_user="root" and smsd_group="wheel"
in your /etc/rc.conf.
Hint: use security/sudo for running smsd scripts as user uucp.
20081108:
AFFECTS: users of editors/tamago
AUTHOR: hrs@FreeBSD.org
The Wnn backend of editors/tamago port now uses unix domain socket
to communicate the server by default. If $[CJKT]SERVER environment
variable is defined, the value is used as the server host name. In
JSERVER case, for example, the server name is determined in the
following way:
$JSERVER --(if null)--> wnn-jserver --(if null)--> "unix"
If the server host name is null or matches "^unix$", unix domain
socket is used. The path name of the socket can be specified in
wnn-[cjkt]udpath custom variable.
20081105:
AFFECTS: users of french/pluxm-devel
AUTHOR: jadawin@FreeBSD.org
Please, use
http://download.pluxml.org/plugins/migration-blog-beta3x-beta4.zip to
migrate. It's strongly advised to backup your blog before updating.
20081102:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
The location of git-shell has changed to
${PREFIX}/libexec/git-core/git-shell. Please remove the old entry from
/etc/shells.
20081030:
AFFECTS: users of japanese/FreeWnn-server
AUTHOR: hrs@FreeBSD.org
The jserver daemon in japanese/FreeWnn-server port now uses "127.0.0.1"
as the default listen address for security reason. If you need
the wildcard address (INADDR_ANY), you have to explicitly set
"listenaddr" to 0.0.0.0 in ${PREFIX}/lib/wnn/ja_JP/jserverrc or
add "-a 0.0.0.0" to ${wnn_flags} in /etc/rc.conf.
20081026:
AFFECTS: users of www/asterisk-gui
AUTHOR: pneumann@gmail.com
The upgrade to version 2.0 will modify your asterisk dialplan when login
to the page. Hardware autodetection will not work, pending update of
misc/zaptel.
20081028:
AFFECTS: users of www/codeigniter
AUTHOR: glarkin@FreeBSD.org
For certain installations, the following steps should be performed
after the CodeIgniter 1.7.0 upgrade (taken from:
http://codeigniter.com/user_guide/installation/upgrade_170.html).
>>> Update your Session Table
If you are using the Session class in your application, AND if you
are storing session data to a database, you must add a new column
named user_data to your session table. Here is an example of what
this column might look like for MySQL:
user_data text NOT NULL
To add this column you will run a query similar to this:
ALTER TABLE `ci_sessions` ADD `user_data` text NOT NULL
You'll find more information regarding the new Session functionality
in the Session class page:
http://codeigniter.com/user_guide/libraries/sessions.html
>>> Update your Validation Syntax
This is an optional, but recommended step, for people currently
using the Validation class. CI 1.7 introduces a new Form Validation
class (http://codeigniter.com/user_guide/libraries/form_validation.html)
which deprecates the old Validation library. We have left the old one
in place so that existing applications that use it will not break, but
you are encouraged to migrate to the new version as soon as possible.
Please read the user guide carefully as the new library works a little
differently, and has several new features.
20081026:
AFFECTS: users of japanese/sj3-server
AUTHOR: hrs@FreeBSD.org
The sj3serv daemon in japanese/sj3-server port now uses "localhost"
as the default listen address for security reason. If you need
the wildcard address (INADDR_ANY), you have to explicitly set
"servername" to 0.0.0.0 in ${PREFIX}/etc/sj3/serverrc.
20081026:
AFFECTS: users of japanese/Canna and japanese/sj3
AUTHOR: hrs@FreeBSD.org
The japanese/Canna and japanese/sj3 port have been split into
japanese/canna-server and japanese/canna-lib, and japanese/sj3-server
and japanese/sj3-lib, respectively for more fine-grained dependency
management in the Ports Collection.
20080926:
AFFECTS: users of www/squid30
AUTHOR: tmseck@netcologne.de
The Squid developers decided to disable COSS support in 3.0, cf.
the discussion starting here:
http://www.squid-cache.org/mail-archive/squid-dev/200809/0067.html
The corresponding port configuration option WITH_SQUID_COSS is still
available but is a no-op for now. If you currently use COSS storage with
Squid 3.0 you need to disable it in squid.conf.
20080924:
AFFECTS: users of ftp/proftpd
AUTHOR: beech@FreeBSD.org
proftpd now stores its .delay and .scoreboard files in /var/run/proftpd
instead of /var/run. If you are updating an existing installation,
adjust the following in /usr/local/etc/proftpd.conf:
ScoreboardFile /var/run/proftpd/proftpd.scoreboard
Also of note: The third party modules, mod_codeconv, mod_comb, and
mod_sql_tds are not compatible with this release and have been removed.
They will be re-added when the respective authors provide updated versions.
20080909:
AFFECTS: users of security/logcheck
AUTHOR: glarkin@FreeBSD.org
logcheck now stores its configuration files in /usr/local/etc/logcheck
instead of /usr/local/etc. If you are upgrading the port from version
1.1.1 to version 1.2.54, copy the following files to a temporary location,
in case they are removed during the upgrade:
/usr/local/etc/logcheck.hacking
/usr/local/etc/logcheck.ignore
/usr/local/etc/logcheck.violations
/usr/local/etc/logcheck.violations.ignore
e.g.:
cd /usr/local/etc
mkdir /tmp/logcheck.saveconf
cp logcheck.hacking logcheck.ignore logcheck.violations* \
/tmp/logcheck.saveconf
After the upgrade, integrate your local changes to the files listed
above into the new configuration files found in the following directories:
/usr/local/etc/logcheck/cracking.d
/usr/local/etc/logcheck/ignore.d.paranoid
/usr/local/etc/logcheck/ignore.d.server
/usr/local/etc/logcheck/ignore.d.workstation
/usr/local/etc/logcheck/violations.d
/usr/local/etc/logcheck/violations.ignore.d
Please consult the following files for more information about
logcheck rules and reporting levels:
/usr/local/share/doc/logcheck/README.logcheck
/usr/local/share/doc/logcheck/README.logcheck-database
Also note that the upgraded port installs a crontab file for user
"logcheck" that executes the logcheck script every hour and emails
the results to root. If the installation process cannot install
the crontab file, it can be installed manually from
/usr/local/share/examples/logcheck/crontab.in, e.g.:
crontab -u logcheck /usr/local/share/examples/logcheck/crontab.in
20080907:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.13 now. 1.12 version was preserved as
www/mediawiki12 port.
20080902:
AFFECTS: users of net-mgmt/nagios and net-mgmt/nagios-devel
AUTHOR: Jarrod Sayers <jarrod@netleader.com.au>
The stable Nagios port has now been updated to version 3.0.3. Upgrading
to this version shouldn't require any configuration changes, but note that
most sample configuration files were moved into objects/ directory.
Nagios 2.12 is still available as net-mgmt/nagios2, use the following to
remain on this legacy stable branch:
portmaster -o net-mgmt/nagios2 net-mgmt/nagios
or, if you're using portupgrade:
portupgrade -o net-mgmt/nagios2 net-mgmt/nagios
Nagios 3.x development continues in net-mgmt/nagios-devel, users of this
port in production use should consider switching to the stable branch:
portmaster -o net-mgmt/nagios net-mgmt/nagios-devel
or, if you're using portupgrade:
portupgrade -o net-mgmt/nagios net-mgmt/nagios-devel
20080902:
AFFECTS: users of math/ploticus
AUTHOR: linimon@FreeBSD.org
This is a major update.
Deprecated: server-side image maps (use client-side instead); definition
of categories within proc areadef (use proc categories instead); proc print.
Discontinued attributes: proc processdata's stack; proc usedata's element,
proc getdata's rotate, and proc defineunits (use the $changeunits()
function instead).
proc rangebar has been renamed proc boxplot and there are major
functionality changes. Any script that uses proc rangebar will need
maintenance.
See http://ploticus.sourceforge.net/doc/news.html for more information.
20080901:
AFFECTS: users of mail/pine4 and editors/pico
AUTHOR: dougb@FreeBSD.org
These two ports have been removed in favor of the new mail/alpine and
editors/pico-alpine ports. UW discontinued work on Pine in September
2005 and is focusing on Alpine now. You should be able to directly
replace pine with alpine.
See http://www.washington.edu/alpine/ for more information.
20080831:
AFFECTS: users of net-mgmt/smokeping
AUTHOR: lth@FreeBSD.org
Smokeping has been updated to 2.4.1, and the example web server
configuration has changed. Please read pkg-message and check that
your server configuration is OK.
20080827:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
With the default Makefile settings, most of the programs are now
installed outside your $PATH, except for "git", "gitk", and some server
side programs that need to be accessible for technical reasons. Invoking
a git subcommand as "git-xyzzy" from the command line has been deprecated
since early 2006 (and officially announced in 1.5.4 release notes); use
of them from your scripts after adding output from "git --exec-path" to
the $PATH is still supported in this release, but users are again
strongly encouraged to adjust their scripts to use "git xyzzy" form, as
we will stop installing "git-xyzzy" hardlinks for built-in commands in
later releases.
Please see this URL for more information:
http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.6.0.txt
20080827:
AFFECTS: users of mail/qmhandle
AUTHOR: garga@FreeBSD.org
A qmHandle.conf file was created, for now, is not needed to edit
${PREFIX}/bin/qmHandle to change stopqmail and startqmail variables.
Just remember to edit configuration file after upgrade.
20080820:
AFFECTS: users of www/p5-Apache-DBI
AUTHOR: pgollucci@FreeBSD.org
www/p5-Apache-DBI has been forked into a MASTER and SLAVE setup
www/p5-Apache-DBI-mp1 and www/p5-Apache-DBI-mp2 so as to work with
www/rt38 among possibly other ports.
20080820:
AFFECTS: users of net/rabbitmq
AUTHOR: pneumann@gmail.com
The database schema has changed in this version of RabbitMQ. If you
attempt to start RabbitMQ-1.4.0 over top of a previous installation,
it will fail, citing "schema_integrity_check_failed". To correct this,
delete your mnesia directory (/var/db/rabbitmq/mnesia) and restart
the server. Note that this will destroy all your durable exchanges and
queues, and all your persisted messages!
20080816:
AFFECTS: users of mail/assp
AUTHOR: J.R. Oldroyd <fbsd@opal.com>
The periodic(8) script no longer outputs to files in the assp directory.
You should remove /var/db/assp/nightly.log and nightly.log.old by hand
once you are done with them. The information that was stored there will
now come in your nightly system email.
20080815:
AFFECTS: users of sysutils/rdiff-backup
AUTHOR: vd@FreeBSD.org
sysutils/rdiff-backup has been upgraded from 1.0.5 to 1.2.0. This is
an incompatible upgrade. If you need the "old" 1.0.5, you can find it
in sysutils/rdiff-backup10.
20080813:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
The layout of the ikiwiki.setup file has changed in a significant
way in this release. Old setup files will continue to work, but new
features, like the new websetup interface, require a new format
setup file. You can convert old setup files into the new format by
running the following command for all your ikiwiki.setup files:
ikiwiki-transition setupformat ikiwiki.setup
20080812:
AFFECTS: users of mail/spamdyke
AUTHOR: mm@FreeBSD.org
The spamdyke port has been updated to 4.0.2. The new version is not
backwards compatible with previous versions. Please examine the new
configuration file for the changes.
20080812:
AFFECTS: users of databases/pgbouncer
AUTHOR: mm@FreeBSD.org
Starting with port version 1.2.3, pgbouncer does not run as root anymore.
If you are upgrading from earlier versions, please update your configuration
in ${PREFIX}/etc/pgbouncer.ini to use log and pid file paths owned by the
newly created pgbouncer user (or customize for a different user yourself).
Default logfile: /var/log/pgbouncer/pgbouncer.log
Default pidfile: /var/run/pgbouncer/pgbouncer.pid
20080808:
AFFECTS: users of chinese/phpbb-tw
AUTHOR: chinsan@FreeBSD.org
The default install directory for phpbb-tw has changed from
${PREFIX}/www/data/phpBB2 to ${PREFIX}/www/phpBB2.
If you are updating from a previous version, to preserve your settings
and data, please do the following:
mv /usr/local/www/data/phpBB2 /usr/local/www
Then update as usual.
20080806:
AFFECTS: users of net-p2p/transmission
AUTHOR: mezz@FreeBSD.org
Update to 1.3x, the net-p2p/transmission now is a meta-port. It depends on
cli, daemon, and gtk2. If you don't want that, uninstall transmission and
install net-p2p/transmission-cli by doing:
portmaster -o net-p2p/transmission-cli net-p2p/transmission
or, if you're using portupgrade:
portupgrade -o net-p2p/transmission-cli net-p2p/transmission
20080805:
AFFECTS: users of devel/qt4
AUTHOR: kde@FreeBSD.org
The Qt 4 ports has been updated to 4.4.1. With this update several ports
specific problems have been fixed. Qt 4 headers and libraries have been
moved to include/qt4 and lib/qt4. bsd.qt.mk defines QT_INCDIR and
QT_LIBDIR now, which could be used in qt4-dependent ports if required.
Before you start to update your ports, please force update of qmake4 and
qt4-corelib ports. Portmaster users can do:
portmaster devel/qmake4 devel/qt4-moc devel/qt4-corelib
or, if you're using portupgrade:
portupgrade -f devel/qmake4 devel/qt4-moc devel/qt4-corelib
20080804:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
Git's cvsps dependency has been switched from cvsps-devel to cvsps. The
two are incompatible, so you will need to do the following before
upgrading git:
portmaster -o devel/cvsps devel/cvsps-devel
20080728:
AFFECTS: users of net/freeradius2
AUTHOR: David Wood <david@wood2.org.uk>
Upgrading the FreeRADIUS port used to replace all unmodified files
in your configuration with the latest version from the sample
configuration. This strategy has two disadvantages; over time your
configuration became based on different versions of the sample
configuration, also major changes to the sample configuration could
leave your configuration in a confusing state.
From version 2.0.5, your configuration is not touched if any
configuration files have been modified.
You are recommended to track changes in the sample configuration and
keep your configuration in a version control system. I use Subversion
(see the devel/subversion port) to track my changes. Keeping the sample
configuration in a 'vendor branch' (see the Subversion book for more
details) allows easy merging of changes from the sample configuration.
*** IMPORTANT ***
You are urged to move your configuration out of the default location
(/usr/local/etc/raddb) before upgrading from 2.0.4 (or earlier)
to 2.0.5 (or later). Once this upgrade is complete, remove the sample
configuration that has been installed in the default location and
move your configuration back to the default location.
This is a one time procedure that will prevent unmodified files in
your configuration from being deleted from your configuration and not
restored during the upgrade. No customised files will be lost in any
circumstances.
The sample configuration in 2.0.5 has been reorganised: the
configuration of most modules is now in the modules directory rather
than in radiusd.conf. You are urged to rearrange your configuration
to match this layout.
There are several improvements in this version of the port, including
a new pkg-message that will help new FreeRADIUS users to get started
with the port, also new 'reload' and 'debug' commands for the rc.d
script. Enjoy!
20080725:
AFFECTS: users of x11-fm/nautilus and misc/shared-mime-info
AUTHOR: gnome@FreeBSD.org
In order to properly update x11-fm/nautilus and misc/shared-mime-info, do
the following using portupgrade:
# pkg_deinstall -fO nautilus
# portupgrade shared-mime-info
# portinstall -O nautilus
Once misc/shared-mime-info has been updated, each user will need to run
the following command:
$ update-mime-database ~/.local/share/mime/
20080725:
AFFECTS: users of www/ojs2
AUTHOR: Greg Larkin <glarkin@FreeBSD.org>
If you are upgrading from a prior version of ojs2, please backup your
database, uploaded files directory, and your config.inc.php before the
upgrade. Read /usr/local/share/docs/ojs2/UPGRADE or visit
http://pkp.sfu.ca/ojs/UPGRADE for additional upgrade information.
20080721:
AFFECTS: users of net/freenet6
AUTHOR: Edwin Groothuis <edwin@mavetju.org>
Please note that there has been a major update of this port (from
version 2.x to 5.x) and that the name of the binaries and configuration
files has changed from "tpsc" to "gw6c". The configuration files
have to be copied from ${PREFIX}/share/examples/freenet6 to
${PREFIX}/etc again.
20080719:
AFFECTS: users of x11-fm/gprename
AUTHOR: Martin Tournoij <carpetsmoker@rwxrwxrwx.net>
GPRename configuration files now live ~/.config/gprename instead of ~/, to
upgrade use the following commands:
% mkdir -p ~/.config/gprename
% mv ~/.gprename ~/.config/gprename/gprename
% mv ~/.gprename_log ~/.config/gprename/gprename_log
20080717:
AFFECTS: users of devel/anjuta
AUTHOR: gnome@FreeBSD.org
Anjuta's neon dependency has been switched from neon26 to neon28. The
two are incompatible, so you will need to do the following to upgrade:
portupgrade -o www/neon28 neon26
portupgrade anjuta
20080714:
AFFECTS: users of www/squid
AUTHOR: Thomas-Martin Seck <tmseck@web.de>
www/squid has been updated to Squid 2.7.STABLE3.
The update should be rather straightforward.
The only noticeable change in the port is that the ICAP patch is no
longer included; this is because this patch was unmaintained for a long
time and its use was not really recommended. Please consider moving to
Squid-3 (currently available as www/squid30) if you need ICAP support.
Squid 2.6 is still available as www/squid26 and will probably be removed
from the Ports Tree by the end of 2008.
20080712:
AFFECTS: users of databases/rrdtool
AUTHOR: rafan@FreeBSD.org
If you use language bindings, like the Perl's RRDs, please upgrade
this port *twice* in order to get the library dependency right.
20080711:
AFFECTS: users of x11-toolkits/gtkdatabox2
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
The port has been deprecated and gtkdatabox has been updated. This was
done so the port tracks vendor name. Please update by doing:
portupgrade -o x11-toolkits/gtkdatabox x11-toolkits/gtkdatabox2
20080709:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
The IkiWiki editpage form now uses the raw page name, not the page title,
in its `page' CGI parameter. You will need to rebuild any existing
IkiWiki installations in order to update their `edit' links to the new
format.
20080708:
AFFECTS: users of emulators/qemu-devel
AUTHOR: nox@FreeBSD.org
The port has been updated to a 20080620 SVN snapshot, which uses the
new (incompatible) kqemu-kmod-devel port that now also works for the
32 bit "qemu" executable on amd64. If you upgrade qemu-devel with the
KQEMU knob on, you have to
# pkg_delete kqemu-kmod-1\*
the old kqemu version first if it is installed.
20080705:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
The IkiWiki search plug-in now uses www/xapian-omega as backend instead
of textproc/hyperestraier. You will need to update the configuration of
any search enabled IkiWiki installations and rebuild them since the
search form has changed.
20080704:
AFFECTS: users of misc/shared-mime-info
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
The misc/shared-mime-info has been updated to 0.40. The Mime Types caches
have been changed a bit. If you have created any custom MIME types, you
will need to run update-mime-database to update your local Mime Types
caches:
$ update-mime-database ~/.local/share/mime/
20080702:
AFFECTS: users of irc/ratbox-services
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
Configuration file and database changes have been made between the
1.1.x series and the current release version of ratbox-services.
It is highly recommended that services are stopped, and the proper
upgrade procedure is followed as described in port's documentation,
before restarting newly updated ratbox-services again.
Please remember to backup the database before attempting an
upgrade, as incorrectly upgraded database may be rendered unusable.
The ratbox-services-1.2.x branch implements multi-language support.
However, an inconsistency in the language indexing may result in
errors. It is therefore recommended that the English default to be
used until the next version release.
20080702:
AFFECTS: users of mail/nocc
AUTHOR: Alex Dupre <ale@FreeBSD.org>
The Nocc configuration file has been moved into 'config' subdir.
When updating, remove the old conf.php file and reconfigure Nocc.
20080701:
AFFECTS: users of devel/subversion*
AUTHOR: Lev Serebryakov <lev@FreeBSD.org>
subversion now uses neon-0.28.x (www/neon28) port, and automatic
portupgrade will fail because www/neon28 will conflict with installed
www/neon26 port.
You should upgrade neon library before subversion with the command:
# portupgrade -o www/neon28 neon26
Also, if you use any special subversion ports with bindings, you
should upgrade these ports to clean subversion port with
# portupgrade -o devel/subversion subversion-\*
and install needed bindings (p5-subversion, py-subversion and/or
ruby-subversion) after that.
If you use subversion with bindings installed from devel/subversion
with custom options, don't forget to install separate bindings ports
after subversion upgrade.
20080630:
AFFECTS: users of graphics/cairo, graphics/poppler*, and future users of www/firefox3
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
The poppler* ports have been updated to 0.8.3 and the shared libraries
have changed. Firefox 3.0 has been added to the tree as www/firefox3.
These changes require that all dependent ports be updated. You can do
this in one of two ways:
# portmaster pixman
# portmaster \*cairo\*
# portmaster -r poppler-0
or:
# pkgdb -Ff
# portupgrade pixman\* \*cairo\*
# portupgrade -r poppler-0.\*
20080627:
AFFECTS: users of x11-drivers/xf86-video-ati
AUTHOR: Jung-uk Kim <jkim@FreeBSD.org>
mach64 and r128 drivers are now separated out from the ati driver.
These video cards are supported by x11-drivers/xf86-video-mach64
and x11-drivers/xf86-video-r128 respectively. If you have one of
the affected video cards and xorg.conf contains the following line:
Driver "ati"
you must specify "mach64" or "r128". Alternatively, you may install
x11-drivers/xf86-video-ati to get a wrapper driver.
20080626:
AFFECTS: users of science/gramps
AUTHOR: Anders Troback <freebsd@troback.com>
Before you upgrade from 2.x to 3.x you need to export your existing
databases to a GRAMPS XML file. After the upgrade you can import
them into the new version.
20080624:
AFFECTS: users of irc/ircd-ratbox-devel
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
Upgrading between different beta releases can cause problems when
changes to the ban database schema have occurred. The 'bantool'
utility now comes with a -u switch that will check and update the
ban database as necessary.
Issuing 'bantool -u' is required when upgrading between beta releases
and must not be done while the ircd is running.
20080624:
AFFECTS: users of www/mod_security
AUTHOR: Marcelo Araujo <araujo@FreeBSD.org>
The mod_security port has been updated from 1.9.4 to 2.5.5. Branch 1.9.x
will not receive any further updates; all users must update mod_security
port to versions 2.1 or 2.5.
You can get more information about update issues at:
http://www.modsecurity.org/documentation/
20080624:
AFFECTS: users of www/opera and www/opera/devel
AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org>
The Opera port has been updated from 9.2x to 9.5x. A lot of things have
been changed such as keyboard shortcuts[1]; new storage and indexing
formats for mail and feeds; new search.ini; native amd64 binaries; no 4.x
support. You will be asked whether to convert mail and feeds to new
format during start up. Warning: there is no way to downgrade back to
the old format. Be sure to see the Changelog[2].
[1] http://www.opera.com/support/search/view/884/
[2] http://www.opera.com/docs/changelogs/freebsd/950/
20080622:
AFFECTS: users of devel/subversion, subversion-devel and subversion-freebsd
with apr from www/apache22
AUTHOR: Clement Laforet <clement@FreeBSD.org>
apr and apr-util bundled with apache 2.2.9 have been upgraded to 1.3.x, so
shared libraries versions have been bumped. If you are using subversion
with apache22 apr, you must rebuild subversion after the update.
20080617:
AFFECTS: users of editors/nvi-devel
AUTHOR: Wesley Shields <wxs@FreeBSD.org>
editors/nvi-devel has been changed to install nvi, nex, and nview as
to not conflict with editors/2bsd-vi. Please note the new names if
you use this port.
20080616:
AFFECTS: users of mail/dkim-milter
AUTHOR: Hirohisa Yamaguchi <umq@ueo.co.jp>
Most of the command line options can now be set in configure files.
So the default values (such as milterdkim_socket) are changed to blank.
Upgrading users should check the values both in rc.conf and
dkim-filter.conf.
20080612:
AFFECTS: users of www/linux-opera
AUTHOR: mezz@FreeBSD.org
The Opera port has been updated from 9.2x to 9.5x. A lot of things have
been changed such as keyboard shortcuts[1]; new storage and indexing
formats for mail and feeds; new search.ini; probably more that I have
missed. I do not know if the keyboard shortcuts and search.ini will be
overwritten. You will be asked whether you want mail and feeds to be
converted to new format during start up. Warning: there is no way to
downgrade back to the old format. Be sure to see the Changelog[2].
[1] http://www.opera.com/support/search/view/884/
[2] http://www.opera.com/docs/changelogs/linux/950/
It is probably best for you to back up your linux-opera directory in
case until you have no problem with new Opera for a while. Also, you
might have to re-configure search and keyboard shortcuts if these were
overwritten:
# cp -Rp ~/.linux-opera ~/.linux-opera-bak
If you are seeing an error of undefined symbols related to GTK+, it is
because it needs newer linux-gtk2 that ports doesn't have. You can enter
'opera:config#FileSelector|DialogToolkit' in the address bar and change
from 0 to 1 in 'Dialog Toolkit' if it annoys you. 0 = auto detection,
1 = QT, and 2 = GTK+.
20080610:
AFFECTS: users of mail/svnmailer
AUTHOR: pgollucci@FreeBSD.org
Some of the config directives and sections allowed have changed. You will
have to edit your config file when updating to 1.1.0-dev-r1373 version of
the port. Please see the following URL for more information:
http://opensource.perlig.de/en/svnmailer/doc-1.1/#general-config-charset
20080609:
AFFECTS: users of devel/pear-Date_Holidays
AUTHOR: tabthorpe@FreeBSD.org
pear-Date_Holidays has been split into multiple subports. If you want
a specific geographic region, look at devel/pear-Date_Holidays_*
20080605:
AFFECTS: users of audio/paman and audio/pavucontrol
AUTHOR: lippe@FreeBSD.org
paman was renamed to pavucontrol, which are two different projects.
paman is a GTK frontend to PulseAudio, while pavucontrol is a GTK-based
volume control tool to PulseAudio.
20080605:
AFFECTS: users of devel/gettext (i.e.: YOU)
AUTHOR: ade@FreeBSD.org
As a result of the upgrade to gettext-0.17, the shared library version
of libintl has changed, so you will need to rebuild all ports that
depend on gettext:
# portupgrade -rf gettext
# portmaster -r gettext
Given the scope and sheer number of dependent ports, it may be more
advisable to simply blow away all existing install ports (after
keeping any local configuration changes), and rebuilding from scratch.
20080603:
AFFECTS: users of editors/emacs
AUTHOR: Yasuhiro KIMURA <yasu@utahime.org>
The port (editors/emacs) is updated to 22.2 and some of Emacs Lisp
directories had changed. So you should reinstall all ports that depend
on it. Please do something like:
# portupgrade -fr emacs
20080601:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
If password based logins is enabled in IkiWiki, those passwords were
stored in cleartext in the userdb. To guard against exposing users'
passwords, IkiWiki 2.48 and later use strong (blowfish) hashes for
storing passwords.
To hash existing passwords, update to ikiwiki-2.48 and run the
following command for each of your IkiWiki src dirs:
ikiwiki-transition hashpassword /path/to/your/wiki/srcdir
20080524:
AFFECTS: users of net-im/jabberd
AUTHOR: mm@FreeBSD.org
Starting with version 2.2.0, resolver is now built in the S2S component.
Jabberd configuration files require updating:
jabberd.cfg: resolver component must be removed
s2s.xml: <lookup> section must be added (see s2s.xml.dist)
resolver.xml: may be deleted (file not required anymore)
20080519:
AFFECTS: users of www/nginx and www/nginx-devel
AUTHOR: osa@FreeBSD.org
Nginx version lines have been changed: 0.5 -> 0.6 for stable and
0.6 -> 0.7 for development version. Make sure your configuration
files are compatible with the new version(s).
20080519:
AFFECTS: users of irc/bitlbee
AUTHOR: brix@FreeBSD.org
The default installation is now configured for running bitlbee as
user 'bitlbee'. Make sure any existing configuration files are
readable by that user.
20080517:
AFFECTS: users of multimedia/smplayer-*
AUTHOR: miwi@FreeBSD.org
The slave port multimedia/smplayer-qt4 has been removed with the upgrade
of multimedia/smplayer to 0.6.0, qt3 is no longer supported. They are now
fully integrated into multimedia/smplayer.
Please uninstall multimedia/smplayer-qt4 port before upgrading
multimedia/smplayer to version 0.6.0 or higher.
20080513:
AFFECTS: users of security/amavisd-new
AUTHOR: scheidell@secnap.net
Amavisd-new 2.6.0 introduces several incompatibilities with prior versions.
If you are upgrading from 2.5.4 or earlier, you will need to update your
SQL schema. If you have third party programs that access SQL tables, you
will need to update those also.
COMPATIBILITY WITH 2.5.4:
- when using SQL for logging (e.g. for a pen pals feature) or for
quarantining, SQL tables maddr, msgs, msgrcpt and quarantine need
to be extended by a new field 'partition_tag'; see below for details;
- when SQL logging (pen pals) or SQL lookups are used, one can choose a
binary or a character data type for fields users.email, mailaddr.email,
and maddr.email; now may be a good opportunity to change a data type
to binary (string of bytes); see below for details;
- when using SQL for logging, a default for $sql_clause{'upd_msg'}
has changed, so if a configuration file replaces this SQL clause
by a non-default setting, it needs to be updated;
Full information in /usr/local/share/doc/amavisd-new/RELEASE_NOTES.
20080513:
AFFECTS: users of audio/ampache
AUTHOR: jadawin@FreeBSD.org
Ampache 3.4 uses a different config parser. Unfortunately the new parser
is unable to read old config files. In order to migrate your current
configuration, you should run `php ${WWWDIR}/bin/migrate_config.inc' from
the command line.
20080508:
AFFECTS: users of databases/ptop
AUTHOR: beech@FreeBSD.org
The authors have changed the name of this utility to `pg_top'. To avoid
conflict with another port in the Tree with the same name we have retained
`ptop' as the portname. Note that binary has also changed to `pg_top'.
Please start the utility with that name after updating.
20080507:
AFFECTS: Perl interface users of audio/gramofile
AUTHOR: rafan@FreeBSD.org
Perl support is removed due to devel/swig11 removal in ports. If you use
the Perl interface, you are encouraged to use the new Audio::Gramofile
found on CPAN (contact me for the ports).
20080506:
AFFECTS: users of net-mgmt/collectd
AUTHOR: daniel@roe.ch
Previously, net-mgmt/collectd used to remove the config file even if it
was changed by the user. This has now been fixed.
To upgrade without losing your configuration, copy
${PREFIX}/etc/collectd.conf away to a safe place before upgrading
net-mgmt/collectd.
In addition, the default location of the data files changed from
${PREFIX}/var/lib/collectd to /var/db/collectd; you may want to move your
data files and edit your configuration accordingly.
20080503:
AFFECTS: users of net/skype-devel
AUTHOR: beech@FreeBSD.org
Skype-devel port has been removed in favor and by upading of net/skype.
If you are running skype-devel, please do the following:
portupgrade -o net/skype net/skype-devel
20080426:
AFFECTS: users of www/phpgedview
AUTHOR: beech@FreeBSD.org
The install location of phpgedview has changed from www/data/phpGedView to
www/phpgedview. If you are updating from a previous version please do
the following:
mv /usr/local/www/data/phpGedView /usr/local/www
You will also need to adjust the paths in your web server to reflect the
new location.
20080416:
AFFECTS: users of security/clamav
AUTHOR: garga@FreeBSD.org
Clamav 0.93 does not support the daily.inc and main.inc directories format
for virus databases. You need to remove these directories manually and
force freshclam to get new cvd format files before starting clamd:
portupgrade clamav
/usr/local/etc/rc.d/clamav-clamd stop
/usr/local/etc/rc.d/clamav-freshclam stop
rm -rf /var/db/clamav/main.inc /var/db/clamav/daily.inc
freshclam
/usr/local/etc/rc.d/clamav-freshclam start
/usr/local/etc/rc.d/clamav-clamd start
20080408:
AFFECTS: users of www/p5-Apache-Test
AUTHOR: pgollucci@FreeBSD.org
www/p5-Apache-Test doesn't actually need www/mod_perl{1,2}. If you would
like to test a mod_perl, than please install www/mod_perl2 or www/mod_perl
as well. The ports infrastructure doesn't support this (yet) but you can
use it to test www/apache13, www/apache20, and/or www/apache22 without
chaining www/p5-Apache-Test.
20080405:
AFFECTS: users of sysutils/tracker
AUTHOR: ahze@FreeBSD.org
The sysutils/tracker port is now a meta port and tracker is now split into
separate ports to allow non-GNOME users to install tracker without pulling
in GNOME components. To upgrade please use the directions below.
Portmaster users:
portmaster -o sysutils/tracker-client tracker
portmaster sysutils/tracker
Portupgrade users:
portupgrade -o sysutils/tracker-client tracker
portupgrade -u sysutils/tracker
20080405:
AFFECTS: users and maintainers of ports that depend on databases/sqlite3
AUTHOR: mnag@FreeBSD.org
Port databases/sqlite3 was updated to 3.5.6 and now has threads enabled
by default. If you encounter any problem with it, you can rebuild SQLite3
without threads and test or change Makefile of affected port with this:
sed -i.bak -E -e "s|USE_SQLITE=.*|USE_SQLITE=34|g" \
-e "s|databases/sqlite3|databases/sqlite34|g" Makefile
Please report success or failure to port maintainer and to me.
20080403:
AFFECTS: users of emulators/qemu and emulators/qemu-devel
AUTHOR: nox@FreeBSD.org
The default configuration location (qemu-ifup script etc.) has been
changed from /etc to ${PREFIX}/etc (usually /usr/local/etc). Move your
files accordingly.
20080330:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.12 now. 1.11 version was preserved on
www/mediawiki111 port.
20080329:
AFFECTS: users of www/phpadsnew
AUTHOR: beech@FreeBSD.org
Phpadsnew has been replaced with www/openx.
To upgrade please do the following:
1. Install www/openx
2. Copy the configuration file from phpadsnew to the var directory of
www/openx
3. Copy your banner images from phpadsnew/www/images to openx/www/images
4. Access openx on your browser and follow the instructions for upgrading
5. When you are satisfied with everything working properly you can remove
www/phpadsnew
20080326:
AFFECTS: users of emulators/linux_base-f8
AUTHOR: bsam@FreeBSD.org
The new port is used just like emulators/linux_base-fc6. Please, read
carefully entry 20070327 about emulators/linux_base-fc6.
20080323:
AFFECTS: users of multimedia/gstreamer
AUTHOR: multimedia@FreeBSD.org
Gstreamer port was updated. Due to the move of some plugins between
ports, you will have to rebuild the gstreamer-plugins-good port after
upgrading.
Portupgrade users:
# portupgrade -a
# portupgrade -f gstreamer-plugins-good
Portmaster users:
# portmaster -a
# portmaster gstreamer-plugins-good
20080323:
AFFECTS: all GNOME users and ports depend on misc/gnomehier
AUTHOR: gnome@FreeBSD.org
GNOME has been updated to 2.22.0. You have to deinstall a few ports first
before using portupgrade or portmaster in order to successfully upgrade
your GNOME installation.
Portupgrade users:
# pkgdb -Ff
# pkg_deinstall -fO gnome-applets\* totem\* gnome-control-center\*
# portupgrade -aOW
Portmaster users:
# pkg_delete -f gnome-applets\* totem\* gnome-control-center\* \
gnome-keyring-manager\*
# portmaster -a
Be sure to read in our known issues and solutions:
http://www.freebsd.org/gnome/docs/faq222.html#q4
20080323:
AFFECTS: users of devel/glib20 and future users of devel/gio-fam-backend
AUTHOR: gnome@FreeBSD.org
In order to update to glib 2.16 or higher, you must first update the
glib20 port on its own or you will get a failure trying to install
devel/gio-fam-backend saying it cannot find -lgio-2.0. Portmaster users
can do:
portmaster glib-2
or, if you're using portupgrade:
portupgrade glib-2\*
20080318:
AFFECTS: users of audio/gnump3d
AUTHOR: jadawin@FreeBSD.org
The layout of gnump3d 3.0 is changed, please read documentation and the
manual pages of gnump3d.
20080318:
AFFECTS: users of net/skype net/skype-devel
AUTHOR: beech@FreeBSD.org
For FreeBSD versions 7.0 and above:
It is required with both skype and skype-devel to update to linux_base-fc6.
Please do the following:
1. Make sure there are no running Linux applications.
2. Unmount linprocfs (umount /compat/linux/proc)
3. Uninstall your current linux_base port
4. Set appropriate sysctl (sysctl compat.linux.osrelease=2.6.16)
5. Install emulators/linux_base-fc6
6 Remount linprocfs (mount /compat/linux/proc)
7. Add compat.linux.osrelease=2.6.16 to etc/sysctl.conf
8. Add OVERRIDE_LINUX_BASE_PORT=fc6 to /etc/make.conf
Note: These instructions also apply to linux_base-f8, please use the same
osrelease.
For FreeBSD versions 5.X and 6.X:
Please use the legacy version net/skype12:
portupgrade -o net/skype12 net/skype
20080316:
AFFECTS: users of net/iscsi-target
AUTHOR: rafan@FreeBSD.org
The default configuration location has been changed from /etc to
${PREFIX}/etc. Move your files accordingly.
20080314:
AFFECTS: users of security/nmapfe
AUTHOR: miwi@FreeBSD.org
nmapfe has been renamed to zenmap upstream. The port has also been
renamed. If you haven't already installed nmapfe, you need to:
portupgrade -o security/zenmap nmapfe\*
20080313:
AFFECTS: users of mail/ezmlm-web
AUTHOR: hans@nordhaug.priv.no
The layout of ezmlm-web 3.2 is changed, please read documentation and
the manual page of ezmlm-web.cgi.
20080312:
AFFECTS: users of x11-wm/enlightenment-devel, x11/ecore and grephics/evas
AUTHOR: stas@FreeBSD.org
Evas and ecore ports have been split to separate modules to simplify
dependency tracking. Thus, portupgrade in many cases won't be able to
correctly update these ports.
The easiest upgrade path would be to remove all EFL ports and install
them from scratch. At least, you should reinstall ecore and evas.
Please note that your old $HOME/.e is no longer compatible with new
snapshot version. You will need to remove this directory and let e17
create it automatically on the next startup.
20080306:
AFFECTS: users of mail/dovecot
AUTHOR: ehaupt@FreeBSD.org
The update to version 1.0.12 will require manual change to the active
configuration file.
mail_extra_groups setting was commonly used insecurely. This setting is now
deprecated. Most users should switch to using mail_privileged_group setting,
but if you really need the old functionality use mail_access_groups instead.
20080303:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.2.2 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
20080223:
AFFECTS: users of www/instiki
AUTHOR: beech@FreeBSD.org
The default installation directory for instiki has changed from
/usr/local/instiki to /usr/local/share/instiki.
If you are updating from a previous version, to preserve your
settings and data, please do the following:
mv /usr/local/instiki /usr/local/share
Then update as usual.
20080219:
AFFECTS: users of x11-wm/xmonad
AUTHOR: jacula@gmail.com
From now XMonad uses a new configuration file system, so you don't have
to edit Config.hs anymore. Instead, create a custom configuration file
~/.xmonad/xmonad.hs. You can take a look at some samples on Xmonad's
website. Note that you can be interested in x11-wm/xmonad-contrib.
20080218:
AFFECTS: users of devel/poco and devel/poco-ssl
AUTHOR: lippemail@gmail.com
The HashFunction class template has been changed in an incompatible way.
The member function formerly named hash() is now the function call
operator. If you have defined your own HashFunction classes, then you
have to update your code.
20080216:
AFFECTS: users of sysutils/symon
AUTHOR: uspoerlein@gmail.com
The symon port has been updated from 2.75 to 2.78. It changes the wire
protocol again. You should update your symux(8) and symon(8) installations
simultaneously, as:
- new symon clients will make old symux servers exit, and
- new symux servers don't understand the old symon client's if() and
mem() probes.
20080208:
AFFECTS: users of ports-mgmt/portupgrade
AUTHOR: sem@FreeBSD.org
As was claimed in the entry 20070301 below in this file, you should fill
ALT_DEPENDS section of pkgtools.conf for portupgrade to work correctly
with your alternative dependencies. Now it is an obligatory requirement.
It was done as a compromise between speed and complexity.
20080203:
AFFECTS: users of www/xshttpd
AUTHOR: johans@FreeBSD.org
www/xshttpd now uses ${PREFIX}/www/xshttpd/ as a root directory for its
data files. The xshttpd configuration files have been moved to
${PREFIX}/www/xshttpd/conf/. Please move the appropriate local files
manually if you are upgrading from 3.4 or older versions.
20080202:
AFFECTS: users of www/punbb
AUTHOR: beech@FreeBSD.org
Install paths have changed. Please do the following prior to upgrade:
cd /usr/local/www
mv punbb punbb.old
cp -R punbb.old/upload punbb
It is now safe to update as usual.
Notes:
* You will probably get uninstall errors regarding files not found. It's
safe to ignore them
* Your webserver path has changed from www/punbb/upload to www/punbb,
please adjust your webserver configuration and restart it
* When you are satisfied with everything working properly you may remove
the punbb.old directory:
rm -r /usr/local/www/punbb.old
20080201:
AFFECTS: users of www/ziproxy
AUTHOR: pankov_p@mail.ru
The configuration file was moved from /usr/local/etc to
/usr/local/etc/ziproxy.
20080126:
AFFECTS: users of net-p2p/deluge
AUTHOR: mezz@FreeBSD.org
Deluge was updated to version 0.5.8.2. If you are using blocklist plugin,
you have to remove blocklist.conf first before you can run it, or it will
crash upon start up.
$ rm -f ~/.config/deluge/blocklist.conf
20080125:
AFFECTS: users of www/mod_security2
AUTHOR: araujo@FreeBSD.org
Update of mod_security2 is a dramatic change, because there is a need
to completely rewrite their obsolete rules and migrate for capacity to
use new syntax.
You are advised to make a complete backup of your configuration files
before you can perform an update.
20080120:
AFFECTS: users of www/apache20
AUTHOR: clement@FreeBSD.org
BDB framework provided by bsd.database.mk is now used by www/apache20
port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details ('make
show-options').
20080120:
AFFECTS: users of www/apache22
AUTHOR: clement@FreeBSD.org
BDB framework provided by bsd.database.mk is now used by www/apache22
port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details.
('make show-options').
20080118:
AFFECTS: users of net/freeradius
AUTHOR: David Wood <david@wood2.org.uk>
FreeRADIUS 2.0 is now available as the net/freeradius2 port. All FreeRADIUS
users are advised to consider upgrading to 2.0. It is the FreeRADIUS team's
intention to put the 1.x server into 'maintenance' mode with just critical
bug fixes.[1] 2.0 has many improvements including numerous bug fixes that
were too difficult for the 1.x server, as well as many new features.
Before uninstalling 1.x, it is recommended that you backup your
configuration, which is typically in /usr/local/etc/raddb, then move it
out of the way. It is also worth backing up the default configuration,
which is typically in /usr/local/share/examples/freeradius/raddb.
1.x configurations should work with the 2.0 server [2]. However the port
automatically upgrades any unedited files in the configuration when you
install a new version of FreeRADIUS. Installing 2.0 with the residue of a
1.x configuration in the default location will result in a mixed 1.x and
2.0 configuration that may not work.
The recommended approach is to diff your 1.x configuration against the
default 1.x configuration, then make corresponding changes to a copy
of the default 2.0 configuration. If you moved your 1.x configuration out
of the way before upgrading, you will have a 2.0 configuration ready to
edit in the default location. It is worth reading man 5 unlang for details
of the new FreeRADIUS 'un-language' before starting.
Alternatively, you can move your 1.x configuration to another location,
such as /usr/local/etc/raddb_v1, then edit /etc/rc.conf to point the rc.d
script to that location. For example:
radiusd_flags="-d /usr/local/etc/raddb_v1"
I cannot guarantee that all 1.x configurations will work with the 2.0
server, and I only recommend using a 1.x configuration as an interim
measure.
[1] - http://www.freeradius.org/business/roadmap.html
[2] - http://preview.tinyurl.com/ysrr6a
20080114:
AFFECTS: users of devel/perforce
AUTHOR: lth@FreeBSD.org
Perforce has been updated to version 2007.3. Upgrading is fairly
straightforward, but it is still highly recommended to follow the
upgrading instructions in the release notes:
http://www.perforce.com/perforce/doc.073/user/relnotes.txt
20080108:
AFFECTS: users of irc/bitlbee
AUTHOR: brix@FreeBSD.org
irc/bitlbee now stores saved user settings in /var/db/bitlbee/, not
$PREFIX/etc/bitlbee/. You will have to manually move any existing user
settings to the new location (or override the user settings directory
using -d if you wish to keep the old behavior). Other configuration
files are still kept in $PREFIX/etc/bitlbee/ by default.
The default installation is now configured for running bitlbee as user
'nobody' by default. Make sure any existing configuration files are
readable by that user.
Reference in New Issue View Git Blame Copy Permalink