mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-25 00:51:21 +00:00
Code Issues Releases Activity
2035d13f50
freebsd-ports/www/squid32/Makefile
Niclas Zeising 39fc32e828 The FreeBSD x11@ and graphics team proudly presents 
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)
2014-04-16 18:28:47 +00:00

519 lines
16 KiB
Makefile
Raw Blame History

# Created by: Thomas-Martin Seck <tmseck@FreeBSD.org>
# $FreeBSD$
PORTNAME= squid
PORTVERSION= 3.2.${SQUID_STABLE_VER}
PORTREVISION= 1
CATEGORIES= www ipv6
MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
http://mirrors.ccs.neu.edu/Squid/ \
ftp://ftp.fu-berlin.de/unix/www/squid/squid/ \
ftp://ftp.nl.uu.net/pub/unix/www/squid/ \
ftp://ftp.solnet.ch/mirror/squid/ \
ftp://ftp.ntua.gr/pub/www/Squid/squid/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid,} \
http://www.squid-cache.org/Versions/v3/3.2/ \
http://www2.us.squid-cache.org/Versions/v3/3.2/ \
http://www3.us.squid-cache.org/Versions/v3/3.2/ \
http://www1.at.squid-cache.org/Versions/v3/3.2/ \
http://www.eu.squid-cache.org/Versions/v3/3.2/ \
http://www1.ie.squid-cache.org/Versions/v3/3.2/ \
http://www1.jp.squid-cache.org/Versions/v3/3.2/ \
http://www1.za.squid-cache.org/Versions/v3/3.2/
MASTER_SITE_SUBDIR= squid
DIST_SUBDIR= squid3.2
PKGNAMESUFFIX= 32
PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \
http://www2.us.squid-cache.org/%SUBDIR%/ \
http://www3.us.squid-cache.org/%SUBDIR%/ \
http://www1.at.squid-cache.org/%SUBDIR%/ \
http://www.eu.squid-cache.org/%SUBDIR%/ \
http://www1.ie.squid-cache.org/%SUBDIR%/ \
http://www1.jp.squid-cache.org/%SUBDIR%/ \
http://www2.tw.squid-cache.org/%SUBDIR%/
PATCH_SITE_SUBDIR= Versions/v3/3.2/changesets
PATCHFILES= #empty
MAINTAINER= tmseck@FreeBSD.org
COMMENT= HTTP Caching Proxy
LICENSE= GPLv2
LICENSE_FILE= ${WRKSRC}/COPYING
SQUID_STABLE_VER= 13
CONFLICTS_INSTALL= squid-2.[0-9].* squid33-* cacheboy-[0-9]* lusca-head-[0-9]*
USES= perl5
GNU_CONFIGURE= yes
USE_BZIP2= yes
USE_RC_SUBR= squid
USERS= squid
GROUPS= squid
MAN1= squidclient.1
MAN8= cachemgr.cgi.8 squid.8
docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS= ${docs:T}
PORTEXAMPLES= *
SUB_FILES+= pkg-install pkg-message
OPTIONS_DEFINE= ARP_ACL AUTH_KERB AUTH_LDAP AUTH_NIS AUTH_SASL AUTH_SMB \
CACHE_DIGESTS DEBUG DELAY_POOLS DNS_HELPER ECAP ESI \
FOLLOW_XFF FS_AUFS FS_COSS HTCP ICAP ICMP IDENT IPV6 KQUEUE \
LARGEFILE SNMP SSL SSL_CRTD STACKTRACES STRICT_HTTP \
TP_IPF TP_IPFW TP_PF VIA_DB WCCP WCCPV2 DOCS EXAMPLES
ARP_ACL_DESC= Enable ARP/MAC/EUI based authentification
AUTH_KERB_DESC= Install Kerberos authentication helpers
AUTH_LDAP_DESC= Install LDAP authentication helpers
AUTH_NIS_DESC= Install NIS/YP authentication helpers
AUTH_SASL_DESC= Install SASL authentication helpers
AUTH_SMB_DESC= Install SMB auth. helpers (req. Samba)
CACHE_DIGESTS_DESC= Use cache digests
DEBUG_DESC= Build with extended debugging support
DELAY_POOLS_DESC= Enable delay pools (bandwidth limiting)
DNS_HELPER_DESC= Use external dnsserver processes for DNS
ECAP_DESC= Enable loadable content adaptation modules
ESI_DESC= Enable support for ESI
FOLLOW_XFF_DESC= Enable support for the X-Following-For header
FS_AUFS_DESC= Enable AUFS (async-io) support
FS_COSS_DESC= Enable COSS (not stable yet)
HTCP_DESC= Enable HTCP support
ICAP_DESC= Enable the ICAP client
ICMP_DESC= Enable ICMP pinging and network measurement
IDENT_DESC= Enable Ident lookups (RFC 931)
KQUEUE_DESC= Enable kqueue(2) support
LARGEFILE_DESC= Support large (>2GB) cache and log files
SNMP_DESC= Enable SNMP support
SSL_CRTD_DESC= Use ssl_crtd to handle SSL cert requests
SSL_DESC= Enable SSL gatewaying support
STACKTRACES_DESC= Enable automatic backtraces on fatal errors
STRICT_HTTP_DESC= Make Squid strictly HTTP compliant
TP_IPFW_DESC= Enable transparent proxying with IPFW
TP_IPF_DESC= Enable transparent proxying with IPFilter
TP_PF_DESC= Enable transparent proxying with PF
VIA_DB_DESC= Enable Forward/Via database
WCCPV2_DESC= Enable Web Cache Coordination Protocol v2
WCCP_DESC= Enable Web Cache Coordination Protocol
OPTIONS_DEFAULT= AUTH_KERB AUTH_NIS FS_AUFS HTCP IDENT KQUEUE \
SNMP WCCP WCCPV2
ECAP_USES= pkgconfig:build
etc_files= squid/cachemgr.conf.default \
squid/errorpage.css.default \
squid/mib.txt \
squid/mime.conf.default \
squid/msntauth.conf.default \
squid/squid.conf.default \
squid/squid.conf.documented
icon_silk_files= application.png arrow_up.png bomb.png box.png \
bricks.png bullet_red.png cd.png chart_line.png \
compress.png computer_link.png css.png cup.png \
database.png database_table.png drive_disk.png \
film.png film_key.png folder.png folder_table.png \
image.png information.png layers.png layout.png \
link.png music.png package.png package_go.png \
page_code.png page_excel.png page_green.png \
page_white.png page_white_acrobat.png page_white_c.png \
page_white_cplusplus.png page_white_flash.png \
page_white_magnify.png page_white_picture.png \
page_white_powerpoint.png page_white_stack.png \
page_white_text.png page_world.png \
page_white_word.png page_white_zip.png photo.png \
picture.png plugin.png plugin_add.png script.png \
script_gear.png script_palette.png
error_files= ERR_ACCESS_DENIED ERR_ACL_TIME_QUOTA_EXCEEDED \
ERR_AGENT_CONFIGURE ERR_AGENT_WPAD \
ERR_CACHE_ACCESS_DENIED \
ERR_CACHE_MGR_ACCESS_DENIED ERR_CONFLICT_HOST \
ERR_CANNOT_FORWARD ERR_CONNECT_FAIL \
ERR_DIR_LISTING ERR_DNS_FAIL \
ERR_ESI ERR_FORWARDING_DENIED \
ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
ERR_GATEWAY_FAILURE \
ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
ERR_ONLY_IF_CACHED_MISS ERR_PRECONDITION_FAILED \
ERR_READ_ERROR ERR_READ_TIMEOUT \
ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \
ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \
ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT \
error-details.txt
error_dirs= af ar az bg ca cs da de el en es et fa fi fr he hu hy id it \
ja ko lt lv ms nl oc pl pt pt-br ro ru sk sl sr-cyrl sr-latn \
sv \
th tr uk uz \
vi zh-cn zh-tw \
templates
error_dir_links= ar-ae ar-bh ar-dz ar-eg ar-iq ar-jo ar-kw ar-lb \
ar-ly ar-ma ar-om ar-qa ar-sa ar-sy ar-tn ar-ye \
az-az bg-bg cs-cz da-dk \
de-at de-ch de-de de-li de-lu \
el-gr \
en-au en-bz en-ca en-gb en-ie en-in en-jm en-nz \
en-ph en-sg en-tt en-uk en-us en-za en-zw \
es-ar es-bo es-cl es-co es-cr es-do es-ec es-es \
es-gt es-hn es-mx es-ni es-pa es-pe es-pr es-py \
es-sv es-uy es-ve \
et-ee \
fa-fa fa-ir fi-fi \
fr-be fr-ca fr-ch fr-fr fr-lu fr-mc \
he-il hu-hu hy-am hy-armn id-id it-ch it-it \
ja-jp ko-kp ko-kr lt-lt lv-lv ms-my nl-nl \
pl-pl pt-pt ro-md ro-ro ru-ru \
sk-sk sl-si sr sr-latn-cs sr-sp sv-fi sv-se \
th-th tr-tr uk-ua vi-vn zh-hk zh-mo zh-sg
libexec= cachemgr.cgi \
diskd \
helper-mux.pl
.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+= unlinkd
.endif
sbin= purge squidclient squid
CONFIGURE_ARGS= --with-default-user=squid \
--bindir=${PREFIX}/sbin \
--sbindir=${PREFIX}/sbin \
--datadir=${ETCDIR} \
--libexecdir=${PREFIX}/libexec/squid \
--localstatedir=/var \
--sysconfdir=${ETCDIR} \
--with-logdir=/var/log/squid \
--with-pidfile=/var/run/squid/squid.pid \
--with-swapdir=/var/squid/cache/squid \
--enable-auth \
--enable-build-info \
--enable-loadable-modules \
--enable-removal-policies="lru heap" \
--disable-epoll \
--disable-linux-netfilter \
--disable-linux-tproxy \
--disable-translation
NO_STAGE= yes
.include <bsd.port.pre.mk>
.if ${CC:T:Mclang} == "clang" || ${CXX:T:Mclang++} == "clang++" || ${OSVERSION} >= 1000024
CXXFLAGS+= -Wno-unused-private-field
.endif
# Authentication methods and modules:
basic_auth= DB MSNT MSNT-multi-domain NCSA PAM POP3 RADIUS \
fake getpwnam
digest_auth= file
external_acl= file_userip unix_group
ntlm_auth= fake smb_lm
libexec+= basic_db_auth \
basic_fake_auth \
basic_getpwnam_auth \
basic_ncsa_auth \
basic_msnt_auth \
basic_msnt_multi_domain_auth \
basic_pam_auth \
basic_pop3_auth \
basic_radius_auth \
digest_file_auth \
ext_file_userip_acl \
ext_unix_group_acl \
ntlm_fake_auth \
ntlm_smb_lm_auth
MAN8+= basic_getpwnam_auth.8 basic_ncsa_auth.8 basic_pam_auth.8 \
basic_radius_auth.8 basic_db_auth.8 \
digest_file_auth.8 \
ext_file_userip_acl.8 ext_unix_group_acl.8
.if ${PORT_OPTIONS:MAUTH_LDAP}
USE_OPENLDAP= yes
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= basic_ldap_auth.8 ext_ldap_group_acl.8
basic_auth+= LDAP
external_acl+= LDAP_group
libexec+= basic_ldap_auth ext_ldap_group_acl
.endif
.if ${PORT_OPTIONS:MAUTH_SASL}
LIB_DEPENDS+= sasl2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+= -I${LOCALBASE}/include
CPPFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= basic_sasl_auth.8
basic_auth+= SASL
libexec+= basic_sasl_auth
.endif
.if ${PORT_OPTIONS:MAUTH_SMB}
BUILD_DEPENDS+= smbclient:${PORTSDIR}/net/samba36
RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba36
basic_auth+= SMB
external_acl+= wbinfo_group
libexec+= basic_smb_auth basic_smb_auth.sh \
ext_wbinfo_group_acl
MAN8+= ext_wbinfo_group_acl.8
.endif
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_NIS} && !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+= NIS
libexec+= basic_nis_auth
.endif
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_KERB} && !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
negotiate_auth= kerberos wrapper
libexec+= negotiate_kerberos_auth negotiate_kerberos_auth_test \
negotiate_wrapper_auth
MAN8+= negotiate_kerberos_auth.8
# the kerberos_ldap_group external helper depends on LDAP and SASL:
.if ${PORT_OPTIONS:MAUTH_LDAP} && ${PORT_OPTIONS:MAUTH_SASL}
external_acl+= kerberos_ldap_group
libexec+= ext_kerberos_ldap_group_acl \
cert_tool
# XXX: this manpage is present in Squid's source but is not being
# built/installed yet (Squid 3.2.3 as at 11/2012).
#MAN8+= ext_kerberos_ldap_group_acl.8
.endif
.else
negotiate_auth= none
.endif
CONFIGURE_ARGS+= --enable-auth-basic="${basic_auth}" \
--enable-auth-digest="${digest_auth}" \
--enable-external-acl-helpers="${external_acl}" \
--enable-auth-negotiate="${negotiate_auth}" \
--enable-auth-ntlm="${ntlm_auth}"
# Storage schemes:
storage_schemes= diskd rock ufs
diskio_modules= AIO Blocking DiskDaemon IpcIo Mmapped
.if ${PORT_OPTIONS:MFS_AUFS}
storage_schemes+= aufs
diskio_modules+= DiskThreads
# Only document switching from libpthread to libthr using libmap.conf
# where lipthread is still the default threading library:
.if ${OSVERSION} < 700041
EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
.endif
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS,
# e.g. SQUID_CONFIGURE_ARGS=--with-aufs-threads=N
LDFLAGS+= -pthread
.else
CONFIGURE_ARGS+= --without-pthreads
.endif
.if ${PORT_OPTIONS:MFS_COSS}
storage_schemes+= coss
.endif
CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}"
CONFIGURE_ARGS+= --enable-disk-io="${diskio_modules}"
# Log daemon helpers:
logdaemon_helpers= file
CONFIGURE_ARGS+= --enable-log-daemon-helpers="${logdaemon_helpers}"
libexec+= log_file_daemon
# Rewrite helpers:
rewrite_helpers= fake
CONFIGURE_ARGS+= --enable-url-rewrite-helpers="${rewrite_helpers}"
libexec+= url_fake_rewrite url_fake_rewrite.sh
# Other options set via 'make config':
.if empty(PORT_OPTIONS:MIPV6) || defined(WITHOUT_IPV6)
CONFIGURE_ARGS+= --disable-ipv6
EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.noipv6
.endif
.if ${PORT_OPTIONS:MDELAY_POOLS}
CONFIGURE_ARGS+= --enable-delay-pools
.endif
.if empty(PORT_OPTIONS:MSNMP)
CONFIGURE_ARGS+= --disable-snmp
.endif
.if ${PORT_OPTIONS:MSSL}
# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included.
# This makes it currently impossible to combine this macro with OPTIONS to
# conditionally include OpenSSL support.
# XXX: is this still true with OptionsNG as of 2012-10?
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+= --enable-ssl \
--with-openssl="${OPENSSLBASE}"
CFLAGS+= -I${OPENSSLINC}
LDFLAGS+= -L${OPENSSLLIB}
.endif
.if ${PORT_OPTIONS:MSSL_CRTD}
CONFIGURE_ARGS+= --enable-ssl-crtd
libexec+= ssl_crtd
.endif
.if ${PORT_OPTIONS:MICMP}
CONFIGURE_ARGS+= --enable-icmp
libexec+= pinger
.endif
.if ${PORT_OPTIONS:MDNS_HELPER}
CONFIGURE_ARGS+= --disable-internal-dns
libexec+= dnsserver
.endif
.if empty(PORT_OPTIONS:MHTCP)
CONFIGURE_ARGS+= --disable-htcp
.else
CONFIGURE_ARGS+= --enable-htcp
.endif
.if ${PORT_OPTIONS:MVIA_DB}
CONFIGURE_ARGS+= --enable-forw-via-db
.else
CONFIGURE_ARGS+= --disable-forw-via-db
.endif
.if ${PORT_OPTIONS:MCACHE_DIGESTS}
CONFIGURE_ARGS+= --enable-cache-digests
.else
CONFIGURE_ARGS+= --disable-cache-digests
.endif
.if ${PORT_OPTIONS:MWCCP}
CONFIGURE_ARGS+= --enable-wccp
.else
CONFIGURE_ARGS+= --disable-wccp
.endif
.if ${PORT_OPTIONS:MWCCPV2}
CONFIGURE_ARGS+= --enable-wccpv2
.else
CONFIGURE_ARGS+= --disable-wccpv2
.endif
.if ${PORT_OPTIONS:MSTRICT_HTTP}
CONFIGURE_ARGS+= --disable-http-violations
.endif
.if empty(PORT_OPTIONS:MIDENT)
CONFIGURE_ARGS+= --disable-ident-lookups
.endif
.if ${PORT_OPTIONS:MARP_ACL}
CONFIGURE_ARGS+= --enable-eui
.else
CONFIGURE_ARGS+= --disable-eui
.endif
.if ${PORT_OPTIONS:MTP_IPFW}
CONFIGURE_ARGS+= --enable-ipfw-transparent
.else
CONFIGURE_ARGS+= --disable-ipfw-transparent
.endif
.if ${PORT_OPTIONS:MTP_PF}
CONFIGURE_ARGS+= --enable-pf-transparent
.else
CONFIGURE_ARGS+= --disable-pf-transparent
.endif
.if ${PORT_OPTIONS:MTP_IPF}
CONFIGURE_ARGS+= --enable-ipf-transparent
.else
CONFIGURE_ARGS+= --disable-ipf-transparent
.endif
.if ${PORT_OPTIONS:MFOLLOW_XFF}
CONFIGURE_ARGS+= --enable-follow-x-forwarded-for
.else
CONFIGURE_ARGS+= --disable-follow-x-forwarded-for
.endif
.if ${PORT_OPTIONS:MECAP}
CONFIGURE_ARGS+= --enable-ecap
LIB_DEPENDS+= ecap:${PORTSDIR}/www/libecap
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
.else
CONFIGURE_ARGS+= --disable-ecap
.endif
.if ${PORT_OPTIONS:MICAP}
CONFIGURE_ARGS+= --enable-icap-client
.else
CONFIGURE_ARGS+= --disable-icap-client
.endif
.if ${PORT_OPTIONS:MESI}
CONFIGURE_ARGS+= --enable-esi
LIB_DEPENDS+= expat:${PORTSDIR}/textproc/expat2 \
xml2:${PORTSDIR}/textproc/libxml2
CFLAGS+= -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2
LDFLAGS+= -L${LOCALBASE}/lib
.else
CONFIGURE_ARGS+= --disable-esi
.endif
.if empty(PORT_OPTIONS:MKQUEUE)
# Squid-3's kqueue support is still marked as experimental, so it is not yet
# enabled automatically as in Squid-2. We are explicit about disabling it,
# nonetheless:
CONFIGURE_ARGS+= --disable-kqueue
.else
CONFIGURE_ARGS+= --enable-kqueue
.endif
.if ${PORT_OPTIONS:MLARGEFILE}
CONFIGURE_ARGS+= --with-large-files
.endif
.if ${PORT_OPTIONS:MSTACKTRACES}
CONFIGURE_ARGS+= --enable-stacktraces
CFLAGS+= -g
STRIP=
.endif
.if ${PORT_OPTIONS:MDEBUG} || defined(WITH_DEBUG)
CONFIGURE_ARGS+= --disable-optimizations --enable-debug-cbdata
WITH_DEBUG?= yes
.endif
# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS}
PLIST_DIRS= %%ETCDIR%%/icons/silk %%ETCDIR%%/icons libexec/squid
PLIST_FILES= ${etc_files:S,^,etc/,} \
%%ETCDIR%%/icons/SN.png \
${icon_silk_files:S,^,%%ETCDIR%%/icons/silk/,} \
${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
PLIST_FILES+= %%ETCDIR%%/errors/COPYRIGHT %%ETCDIR%%/errors/TRANSLATORS
.for d in ${error_dirs}
PLIST_DIRS+= %%ETCDIR%%/errors/${d}
PLIST_FILES+= ${error_files:S,^,%%ETCDIR%%/errors/${d}/,}
.endfor
PLIST_FILES+= ${error_dir_links:S,^,%%ETCDIR%%/errors/,}
PLIST_DIRS+= %%ETCDIR%%/errors
PLIST_DIRSTRY+= %%ETCDIR%%
post-patch:
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
${WRKSRC}/src/cf.data.pre
pre-install:
# Prevent installation of .orig files by deleting them.
@${FIND} ${WRKSRC} -name '*.bak' -delete
@${FIND} ${WRKSRC} -name '*.orig' -delete
pre-su-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
post-install:
.if ${PORT_OPTIONS:MEXAMPLES}
@${MKDIR} ${EXAMPLESDIR}
${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
.endif
.if ${PORT_OPTIONS:MICMP}
${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
${CHGRP} squid ${PREFIX}/libexec/squid/pinger
.endif
.if ${PORT_OPTIONS:MDOCS}
@${MKDIR} ${DOCSDIR}
cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
@${SETENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
@${ECHO_CMD} ""
@${CAT} ${PKGMESSAGE}
@${ECHO_CMD} ""
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink