mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-26 05:02:18 +00:00
Code Issues Releases Activity
3b7ea6467d
freebsd-ports/UPDATING
Raphael Kubo da Costa b2de547574 Add some notes about rebuilding kdelibs4-dependent ports if using clang. 
As mentioned in r322300, clang support has been improved since the update to
4.10.4 a few days ago.

This, however, requires a rebuild of the ports that depend on kdelibs4. Most
of them are covered by the KDE update itself, but those which are not part
of the Software Compilation need to be rebuilt manually to make sure the
previous issues (proper symbol visibility being the most annoying of them)
are solved.

I haven't fully tested all the possible portmaster/portupgrade/pkg commands
myself, so please shout out loud if they're not correct.

In collaboration with:	avilla@
2013-07-05 17:45:43 +00:00

8573 lines
283 KiB
Plaintext
Raw Blame History

This file documents some of the problems you may encounter when upgrading
your ports. We try our best to minimize these disruptions, but sometimes
they are unavoidable.
You should get into the habit of checking this file for changes each time
you update your ports collection, before attempting any port upgrades.
20130705:
AFFECTS: users of x11/kdelibs4
AUTHOR: kde@FreeBSD.org
The KDE Software Compilation 4.10.4 was committed a few days ago, and
version 4.10.5 was committed today.
They include better support for using clang as the compiler, but that
requires recompiling all KDE ports which depend on x11/kdelibs4. Most
ports which fall into this category are already part of the KDE Software
Compilation and have been updated to version 4.10.5, but those released
separately need to be rebuilt manually.
If you are building your KDE ports with clang, doing the following is
recommended:
# portmaster -r kdelibs-4\*
or
# portupgrade -fr x11/kdelibs4
or
# pkg install -fR x11/kdelibs4
Alternatively, to avoid rebuilding the ports which are part of the 4.10.5
update:
# portmaster -x \*-4.10.5\* -r kdelibs-4\*
or
# portupgrade -x \*-4.10.5\* -fr x11/kdelibs4
20130703:
AFFECTS: users of comms/trustedqsl and comms/tqsllib
AUTHOR: db@FreeBSD.org
Upstream have removed the need for a separate port for the library
formerly found in comms/tqsllib. Please remove tqsllib before installing
trustedqsl
20130627:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Since June 22nd, portmaster no longer relies on 'WITH_PKGNG' to be defined,
or ports to be checked out to enable pkgng support.
It now considers whether or not pkg is installed and registered with itself.
I.e., if this returns data, pkgng is considered in use:
# pkg info pkg
It's possible that you may have tested pkgng in the past, ran pkg2ng, and
never fully committed to it by setting WITH_PKGNG. If this is the case,
uninstall pkg with pkg_info/pkg_delete and also remove the stale database,
rm /var/db/pkg/local.sqlite.
This could manifest itself as portmaster -L showing the wrong versions, or
portmaster no longer detecting installed packages correctly.
Note that PORTS still require WITH_PKGNG=yes in make.conf if you are not
running CURRENT.
20130627:
AFFECTS: users of net/samba36
AUTHOR: timur@FreeBSD.org
Samba has updated format of it's printing tdbs (ntprinting.tdb, ntforms.tdb,
ntdrivers.tdb) to include character encoding. When updating from Samba 3.5
or earlier to Samba 3.6 or 4.0 these tdbs need to be migrated to new registry
based printing management. This implies also character conversion.
You have to specify the correct code page for the conversion, see iconv -l.
The mostly used one is Windows Latin1 which is CP1252.
You can correctly view the tdb with:
# net printing dump encoding=CP1252 /path/to/ntprinters.tdb
or migrate it with e.g.:
# net printing migrate encoding=CP1252 /path/to/ntprinters.tdb
If you migrate printers it is suggest to do it in the following order:
ntforms.tdb
ntdrivers.tdb
ntprinting.tdb
Don't forget to rename, move or delete these files in /var/db/samba after
the migration.
20130623:
AFFECTS: users of net-im/mikutter003
AUTHOR: tota@FreeBSD.org
net-im/mikutter003 has been removed from the ports tree because the
Twitter API version 1.0 was deprecated on 2013-05-07 and mikutter003,
which uses the API 1.0, won't work.
Please consider using net-im/mikutter instead of this.
1. deinstall mikutter003
2. upgrade Ruby to 1.9( or later) (see the entry 20130527)
3. install net-im/mikutter
20130623:
AFFECTS: users of www/magento
AUTHOR: melvyn@magemana.nl
Magento has been updated to 1.7.0.2 on 2013-06-03. With it a stricter file
system policy is enforced on the port. If you (or your customer) rely heavily
on Magento Connect via the backend to install extensions, your quickfix is:
# chown -R www: ${PREFIX}/www/magento
# chmod -R u+w ${PREFIX}/www/magento
The more conservative approach:
# chown -R www: ${PREFIX}/www/magento/app/code/{local,community} \
${PREFIX}/www/magento/app/{design,locale} \
${PREFIX}/www/magento/{downloader,skin}
# chmod -R u+w ${PREFIX}/www/magento/app/code/{local,community} \
${PREFIX}/www/magento/app/{design,locale} \
${PREFIX}/www/magento/{downloader,skin}
The conservative aproach will alert you to extensions that try to write in
Magento core, while allowing clean extensions to install properly (corner
cases may exist).
20130619:
AFFECTS: users of devel/subversion
AUTHOR: ohauer@FreeBSD.org
devel/subversion has been upgraded from 1.7.10 to 1.8.0
If you want to upgrade, and use http/https access to repositories,
please check, that the SERF option is enabled, as NEON support
is gone. Also, mod_dontdothat and svnauthz_validate are
now eanbled with one option TOOLS, among other new tools
and SVNMUCC is enabled always.
subversion-1.7.x is available as devel/subversion17
To stay on subversion-1.7.x set in /etc/make.conf
WITH_SUBVERSION_VER=17
and use the following command
# pkg set -o devel/subversion:devel/subversion17
or
# portmaster -o devel/subversion17 devel/subversion
20130614:
AFFECTS: users who set port options in make.conf
AUTHOR: tijl@FreeBSD.org
Configuring options in make.conf using variables like OPTIONS_SET and
OPTIONS_UNSET now also suppresses the option dialog for those options.
This means that when building a port the option dialog will only appear if
there are truly new options that have not been configured before using either
the dialog or make.conf. This allows you to set options like DOCS, NLS,
X11, etc. once for all ports and not have option dialogs pop up if those are
the only options. For a list of variables you can set in make.conf to
control options see Mk/bsd.options.mk.
20130612:
AFFECTS: users of lang/perl* and any port that depends on it
AUTHOR: az@FreeBSD.org
lang/perl5.12 has been upgraded from version 5.12.4 to 5.12.5
lang/perl5.14 has been upgraded from version 5.14.2 to 5.14.4
lang/perl5.16 has been upgraded from version 5.16.2 to 5.16.3
The directory structure where Perl is installed has also been modified:
"major.minor" is now used instead of "major.minor.patchlevel".
The "perl-after-upgrade" script has been removed.
Please rebuild all Perl ports and all ports that depend on it:
# portmaster -r perl
or
# portupgrade -rf perl
or
# pkg install -fR perl
20130609:
AFFECTS: users of audio/flac and any port that depends on it
AUTHOR: naddy@FreeBSD.org
FLAC has been updated to 1.3.0 and the shared library versions
have been bumped. Please rebuild all ports that depend on it:
# portmaster -r flac
or
# portupgrade -fr audio/flac
or
# pkg install -fR audio/flac
20130607:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.4 released.
20130604:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
The Glorious Glasgow Haskell Compiler has been updated to version
7.6.3 and Haskell Platform to 2013.2.0.0. Hence it is recommended to
rebuild or reinstall all the dependent ports by one of the following
commands:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
Note that prefixes used for hs- ports (Cabal packages) have been
changed to PREFIX/{lib,share,share/doc}/cabal/ghc-GHC_VERSION to
enable more seamless upgrades in the future.
20130603:
AFFECTS: users of dns/opendnssec
AUTHOR: wg@FreeBSD.org
Some database changes have been made between version 1.3 and 1.4,
upgrading needs to be done manually by running the following scripts:
For MySQL users:
PREFIX/share/opendnssec/migrate_adapters_1.mysql
For SQLite users:
PREFIX/share/opendnssec/migrate_adapters_1.sqlite3
For the full migration explanation see:
PREFIX/share/doc/opendnssec/MIGRATION
opendnssec 1.3 version was preserved as dns/opendnssec13 port.
20130601:
AFFECTS: users of textproc/ack
AUTHOR: rakuco@FreeBSD.org
ack has been updated to version 2.04. It is slightly incompatible with some
options present in ack1. For more information, see
http://beyondgrep.com/ack-2.0.
20130530:
AFFECTS: users of irc/inspircd
AUTHOR: swills@FreeBSD.org
The irc/inspircd port has been updated to 2.0.12. Some of the config option
names in the rc script have been changed. Check the script for more detail.
20130527:
AFFECTS: users of lang/ruby18
AUTHOR: swills@FreeBSD.org
The default ruby version has been updated from 1.8 to 1.9. First, stop any
software that uses ruby. Then, you'll need to rebuild all ports that depend
on ruby:
If you use portmaster:
# portmaster -o lang/ruby19 lang/ruby18
# portmaster -R -r ruby-1.9
If you use portupgrade:
# portupgrade -f lang/ruby18
# portupgrade -f lang/ruby19 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.8.\* -fr lang/ruby18
After these steps are complete, you can pkg_delete ruby 1.8 if you
no longer need it.
If you use pkgng:
# pkg set -o lang/ruby18:lang/ruby19
# pkg install -fR lang/ruby19
If you wish to keep the 1.8 version as default, add the following lines
to your /etc/make.conf file:
#
# Keep ruby 1.8 as default version.
#
RUBY_DEFAULT_VER=1.8
20130525:
AFFECTS: users of sysutils/rsyslog5*
AUTHOR: brd@FreeBSD.org
Rsyslog 5.x has reached end of life status and has therefore been removed.
While sysutils/rsyslog6* exists, please consider migrating to
sysutils/rsyslog7 as that is the currently supported release.
20130525:
AFFECTS: users of mail/postgrey
AUTHOR: Darren Pilgrim <ports.maintainer@evilphi.com>
The RC script for postgrey has been modified. If you use the
default value for postgrey_flags this does not affect you.
If you have postgrey listening on a unix socket or set any optional
values, please read the comments in the RC scripts and check your
settings in rc.conf prior to restarting postgrey.
20130525:
AFFECTS: users of x11/xorg and all xorg ports
AUTHOR zeising@FreeBSD.org
xorg, including libraries and some drivers, was updated.
If you are running the default xorg distribution, no special upgrade procedure
should be neccessary.
If you are running with WITH_NEW_XORG= make sure to update and rebuild all
installed drivers since xorg-server has been updated.
20130520:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
This is the first stable release based on Lucene 4. We recommend testing
the upgrade before doing it in production.
Upgrading from 0.20 requires a full cluster restart.
In order to be able to downgrade, stop indexing new data, issue a flush
request, do the upgrade and only enable indexing of new data once you
are certain that you no longer need to downgrade. Once new data has
been indexed, downgrading is no longer possible. To be extra safe, back
up your data before upgrading.
20130519:
AFFECTS: users of net/activemq
AUTHOR: tj@FreeBSD.org
The JVM used by activemq has changed to OpenJDK 7. You will need to
make sure javavmwrapper is configured to use the installed
java/openjdk7 JVM.
20130512:
AFFECTS: users of devel/hs-git-annex
AUTHOR: haskell@FreeBSD.org
On FreeBSD, git-annex incorrectly calculated SHA256 hashes for files
added to the annex repository due to the BSD-style output of
/sbin/sha256. The result of this is silent data corruption.
This problem has been fixed, but every file stored in an annex
repository will fail a `git-annex fsck` after the upgrade. Thus,
before updating, it is wise to issue the command below and restore the
files.
$ git-annex uninit
Corruptions can then be found by finding all files with the same hash.
Note that only files that were mishashed to the same location are a
problem.
20130511:
AFFECTS: users of TeX
AUTHOR: hrs@FreeBSD.org
One can now choose TeXLive or teTeX by using TEX_DEFAULT.
Specifying TEX_DEFAULT=texlive, almost all of ports which use TeX
will install and depend on TeXLive-based ones. Note that the
default value is still "tetex" and the two cannot coexist. You need
to remove all of the TeX-related packages based on teTeX to try
TeXLive.
20130507:
AFFECTS: users of comms/usbmuxd or comms/libimobiledevice
AUTHOR: avilla@FreeBSD.org
libusbmuxd and libimobiledevice versions have changed. Please, rebuild
all the ports that depend on them:
# portmaster -r usbmuxd
or
# portupgrade -fr comms/usbmuxd
or
# pkg install -fR comms/usbmuxd
20130507:
AFFECTS: users of devel/libplist
AUTHOR: avilla@FreeBSD.org
libplist Python bindings were split from the main port. To get them you
need to install devel/py-libplist.
20130506:
AFFECTS: users of TeX
AUTHOR: hrs@FreeBSD.org
TeXLive ports have been imported. Although most of ports still depend
on teTeX at this moment, they will be converted to use TeXLive.
The directory layout of them is as follows. Please use print/texlive-full
if you are not familiar with how each component works. Finer-grained
ports will be added (specifically, meta ports for smaller installation
and so on). Note that the full installation needs around 3GB of disk space.
teTeX-based ports and TeXLive are mutually exclusive. This means TeXLive
ports cannot be installed when teTeX is already installed. You need
to remove all of the TeX-related packages based on teTeX to try TeXLive.
Migration procedure will be announced when conversion of the port
dependency is completed.
* Meta port
- print/texlive-full: meta port to install all of the TeXLive components
* Libraries
- devel/tex-kpathsea: kpathsea library
- devel/tex-web2c: WEB2C toolchain and TeX engines
- print/tex-ptexenc: character code conversion library for pTeX
* Base part of the TeXLive
- print/texlive-base: binary programs in TeXLive
- print/texlive-texmf: macro and font data in TeXLive
- print/texlive-infra: tlmgr dependency (Perl modules)
- print/tex-formats:
* TeX Formats
- print/tex-formats: TeX, LaTeX, PDFTeX, AMSTeX, ConTeXT, CSLaTeX,
EplainTeX, METAFONT, MLTeX, PDFTeX, TeXsis
- print/tex-aleph: Aleph/Lambda
- print/tex-xetex: XeTeX
- print/tex-luatex: LuaTeX
- print/tex-jadetex: JadeTeX
- print/tex-xmltex: XMLTeX
- japanese/tex-ptex: pTeX
* DVI ware
- print/tex-xdvik: XDvi
20130503:
AFFECTS: users of security/libgcrypt and any port that depends on it
AUTHOR: ehaupt@FreeBSD.org
The libgcrypt port has been updated to 1.5.2 and all shared libraries
versions have been bumped. So you need to rebuild all applications that
depend on libgcrypt. Do something like:
# portmaster -r libgcrypt
or
# portupgrade -rf libgcrypt
Alternatively, you may install sysutils/bsdadminscripts, run pkg_libchk and
rebuild all detected ports:
# pkg_libchk | tee /tmp/rebuild
# awk -F':' '/libgcrypt.so/ {print $1}' /tmp/rebuild | sort | uniq \
| xargs portmaster -D
20130502:
AFFECTS: users of ports-mgmt/pkg, ports-mgmt/poudriere, ports-mgmt/tinderbox
AUTHOR: bdrewery@FreeBSD.org
This only affects people who are _building_ binary packages for pkgng. If you
are building from ports please ignore this. This step is optional.
It is recommended to rebuild all packages and then have your users run 'pkg
check -Ba' and 'pkg upgrade' on their servers once. This will allow the new
shlib tracking to reinstall packages that have changed shlib requirements.
20130427:
AFFECTS: users of print/a2ps-{a4,letter}, print/c2ps-{a4,letter}, print/lprps-{a4,letter}, or graphics/jpeg2ps-{a4,letter}
AUTHOR: hrs@FreeBSD.org
The affected ports have been converted to use libpaper for the default paper
size as print/psutils did. For more detail, see 20130424 below.
20130424:
AFFECTS: users of print/psutils-a4 or print/psutils-letter
AUTHOR: hrs@FreeBSD.org
print/psutils-a4 and print/psutils-letter have been merged into a single port
print/psutils. The default paper size in psnup(1), psresize(1), and
pstops(1) is now selected via an environment variable and/or a configuration
file of libpaper(3). For more detail, see papersize(5) and paperconfig(8)
manual page. If you prefer A4 or letter size by default as the old
version did, please install print/papersize-default-a4 or
print/papersize-default-letter, which installs a papersize configuration
file without manual configuration.
20130423:
AFFECTS: users of mail/postfix
AUTHOR: sahil@FreeBSD.org
This is a significant update; so, please carefully review the
RELEASE_NOTES to identify which incompatible changes impact your
environment.
20130408:
AFFECTS: users of astro/libkgeomap, graphics/digikam-kde4, graphics/kipi-plugins-kde4
AUTHOR: makc@FreeBSD.org
Digikam ports have been updated and split. Previous versions have
to be deinstalled before upgrade:
# pkg_delete -f digikam-2\* kipi-plugins-2\* libkgeomap-2\*
or
# pkg delete -fg digikam-2\* kipi-plugins-2\* libkgeomap-2\*
20130403:
AFFECTS: users of mail/thunderbird-esr*
AUTHOR: flo@FreeBSD.org
Mozilla stopped providing 2 versions of thunderbird. The only one lives
in mail/thunderbird if you are using thunderbird-esr please switch to
thunderbird by running on of the following commands.
# portupgrade -o mail/thunderbird mail/thunderbird-esr
# portupgrade -o mail/thunderbird-i18n \
mail/thunderbird-esr-i18n (if installed)
or
# portmaster -o mail/thunderbird mail/thunderbird-esr
# portmaster -o mail/thunderbird-i18n \
mail/thunderbird-esr-i18n (if installed)
20130331:
AFFECTS: users of */hs-*
AUTHOR: haskell@FreeBSD.org
Due to some unexpected dynamic linking problems, Haskell Cabal ports with
binaries that link to their own libraries may not work. With default
configuration, the following ports are known to have this problem:
Agda, BNFC, pandoc, and uuagc. (Their port revision are now bumped.)
In general, it is recommended to rebuild the port if you are
experiencing that the corresponding binary will not start, e.g.:
% agda
Shared object "libHSAgda-2.3.2-ghc7.4.2.so" not found, required by "agda"
20130329:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Portmaster 3.15 should be skipped if you are not using pkgng and are on
9.1, 8-STABLE, 9-STABLE, or CURRENT. It may require manual upgrading to
3.16:
# make -C /usr/ports/ports-mgmt/portmaster build deinstall install clean
20130329:
AFFECTS: users of net/kio-upnp-ms
AUTHOR: avilla@FreeBSD.org
A wrong setting in x11/kdelibs4 was causing some unlisted files to
be installed. Remember to delete them after updating x11/kdelibs4 to
4.10.1_1:
# rm /usr/local/kde4/bin/upnpmstest
# rm /usr/local/kde4/bin/stattest
# rm /usr/local/kde4/bin/recursive_upnp
20130327:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
Privilege separation is enabled in OpenSMTPD port from 5.3,1. Users
upgrading from version 201303011853 or earlier are required to follow
the instructions in pkg-message to fix the filesystem permissions on
OpenSMTPD spool directories.
20130327:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.10.1. kdelibs4 does no longer
directly use aspell or hspell, to regain their functionality enable
corresponding option in textproc/enchant.
A number of ports have been split and must be deinstalled before
upgrading:
# pkg_delete -f kdegames-4\* kde-workspace-4\* kde-wallpapers-4\*
or
# pkg delete -fg kdegames-4\* kde-workspace-4\* kde-wallpapers-4\*
20130326:
AFFECTS: users of deskutils/strigi
AUTHOR: makc@FreeBSD.org
Strigi port has been split on libraries, client, daemon, and utilities.
Manual update is required:
# cd /usr/ports/deskutils/strigi && make deinstall && \
make clean && make install clean
or
# pkg delete -f strigi && pkg upgrade && pkg install deskutils/strigi
20130323:
AFFECTS: users of archivers/libarchive
AUTHOR: glewis@FreeBSD.org
The archivers/libarchive port has been updated to 3.1.2. The shared library
version has changed from 12 to 14. Please rebuild all ports that depend on
it:
# portmaster -r libarchive
or
# portupgrade -fr archivers/libarchive
or
# pkg install -fR archivers/libarchive
20130319:
AFFECTS: users of ports
AUTHOR: bdrewery@FreeBSD.org
Ports now use ports-mgmt/dialog4ports to render and interact with the
options dialog in 'make config'. This will be automatically built and
installed on the first use.
dialog4ports provides a new UI able to represent all the features provided
by the new options framework.
20130319:
AFFECTS: users of net/freerdp
AUTHOR: fluffy@FreeBSD.org
The net/freerdp package was changed API and require to deinstall previous
version first to avoid build conflicts.
20130317:
AFFECTS: users of graphics/poppler
AUTHOR: gnome@FreeBSD.org
The graphics/poppler has been updated to 0.22.2. The shared library version
has changed from 18 to 34. Please rebuild all ports that depends on it:
# portmaster -r poppler-0
or
# portupgrade -fr graphics/poppler
or
# pkg install -fR graphics/poppler
20130317:
AFFECTS: users of devel/protobuf
AUTHOR: vanilla@FreeBSD.org
The devel/protobuf has been updated to 2.5.0. The shared library version
has changed from 7 to 8. Please rebuild all ports that depends on it:
# portmaster -r protobuf
or
# portupgrade -fr devel/protobuf
or
# pkg install -fR devel/protobuf
20130316:
AFFECTS: users of converters/libiconv and devel/gettext
AUTHOR: bapt@FreeBSD.org
libiconv now handles the lib/charset.alias file instead of devel/gettext.
If you are using pkgng 'and' upgrading from source with portupgrade or
portmaster, first delete gettext, upgrade libiconv, then reinstall gettext.
This will break sudo, so you *must* do this in a root shell (sudo -i)
if you use sudo.
# pkg delete -f devel/gettext
# portmaster converters/libiconv devel/gettext
or
# pkg delete -f devel/gettext
# portupgrade converters/libiconv devel/gettext
20130308:
AFFECTS: users of net-im/folks and devel/libgee
AUTHOR: kwm@FreeBSD.org
folks and libgee have been repocopied net-im/folks04 and devel/libgee06
respectively. Please do the following according to package manager used.
# portmaster -o devel/libgee06 devel/libgee
# portmaster -o net-im/folks04 net-im/folks
or
# portupgrade -fo devel/libgee06 devel/libgee
# portupgrade -fo net-im/folks04 net-im/folks
or
# pkg set -o devel/libgee:devel/libgee06
# pkg set -o net-im/folks:net-im/folks04
20130307:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
textproc/elasticsearch has been updated to 0.20.5. This update also
changes the required JDK to OpenJDK 7 as there are known issues when
running on a Java 1.6 JDK.
20130307:
AFFECTS: users of audio/liblastfm
AUTHOR: nivit@FreeBSD.org
The audio/liblastfm has been updated to 1.0.6. The shared library version
has changed from 0 to 1. Please rebuild all ports that depends on it:
If you use portmaster:
portmaster -r liblastfm
If you use portupgrade:
portupgrade -fr audio/liblastfm
If you use pkgng with binary packages:
pkg install -fR audio/liblastfm
20130305:
AFFECTS: users of devel/py-setuptools (i.e you)
AUTHOR: rm@FreeBSD.org
devel/py-setuptools was replaced with devel/py-distribute. Please do
the following according to package manager used. py-setuptools port
will be removed shortly.
# portmaster -o devel/py-distribute devel/py-setuptools
or
# portupgrade -fo devel/py-distribute devel/py-setuptools
or
# pkg set -o devel/py-setuptools:devel/py-distribute
# pkg install -f devel/py-distribute
20130226:
AFFECTS: users of textproc/apache-solr
AUTHOR: vanilla@FreeBSD.org
textproc/apache-solr has beed repocopied to textproc/apache-solr3.
If you need to continue with the old stable version please run
# portmaster -o textproc/apache-solr3 textproc/apache-solr
or
# portupgrade -fo textproc/apache-solr3 textproc/apache-solr
or
# pkg set -o textproc/apache-solr:textproc/apache-solr3
20130218:
AFFECTS: users of net/samba4-devel
AUTHOR: timur@FreeBSD.org
The port was renamed into net/samba4 and is going to replace older
development version of Samba4. You can upgrade it with:
# portmaster -o net/samba4 net/samba4-devel
In case you want to upgrade from net/samba36 make sure, that you've
made backup of /usr/local/etc/smb.conf and the content of /var/db/samba/
directory.
There is no direct upgrade path from Samba3 to Samba4, but you can
always try:
# portmaster -o net/samba4 net/samba36
Make sure you've read instructions from the supplied README.FreeBSD
file and read all the relevant pages on http://wiki.samba.org/
We still miss necessary support for Samba4 from base ntpd and bind9,
port versions are also are not ready yet, but been worked on.
Please note, that Samba4 is still in it's early days, so there are
bugs both from my side and it's own, so be careful with placing it
into production.
20130206:
AFFECTS: users of sysutils/boxbackup
AUTHOR: bdrewery@FreeBSD.org
The default location of the configuration files changed from
/usr/local/etc/box to /usr/local/etc/boxbackup. Move your
configuration after upgrading:
mv /usr/local/etc/box /usr/local/etc/boxbackup
20130206:
AFFECTS: users of x11/wbar
AUTHOR: nivit@FreeBSD.org
wbar has been updated to 2.3.4. The new version uses a different icon
for the dock background, so you have to replace the old one in your
config file ~/.wbar
Replace
i: /usr/local/share/pixmaps/wbar/osxbarback.png
with
i: /usr/local/share/pixmaps/wbar/dock.png
20130206:
AFFECTS: users of security/libtasn1 and any port that depends on it
AUTHOR: novel@FreeBSD.org
libtasn1 has been updated to 2.14 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
libtasn1.
If you use portmaster:
portmaster -r libtasn1
If you use portupgrade:
portupgrade -fr security/libtasn1
If you use pkgng with binary packages:
pkg install -fR security/libtasn1
20130206:
AFFECTS: users of Tcl/Tk
AUTHOR: gahr@FreeBSD.org
The following ports have been removed, as threads and modules are
now included in the main ports:
- lang/tcl84-thread
- lang/tcl85-thread
- lang/tcl86-thread
- lang/tcl-modules
- x11-toolkits/tk84-thread
- x11-toolkits/tk85-thread
- x11-toolkits/tk86-thread
Please remove them ...
If you use pkgng:
pkg delete -f <port>
If you use pkg_* tools
pkg_delete -f <port>
... before rebuilding all ports that depend on them:
If you use portmaster:
portmaster -w -r <port>
If you use portupgrade:
portupgrade -Ofr <origin/port>
If you use pkgng with binary packages:
pkg install -fR <origin/port>
20130205:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that the recent devel/libffi update caused some breakage in the Haskell
ports with the DYNAMIC option enabled. The problem has been identified and
fixed since then. All Haskell ports have been updated to their latest stable
versions or bumped as DYNAMIC is enabled by default.
Hence it is recommended to rebuild or reinstall all ports depending on GHC
by one of the following commands:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
20130205:
AFFECTS: users of editors/libreoffice
AUTHOR: bapt@FreeBSD.org
LibreOffice has been updated to 3.6.5 with a bundle version of libcmis. The
build will fail if you sill have net/libcmis 0.1 installed. Before upgrading
LibreOffice you should either first remove libcmis from your system or uprade
it to version 0.3.
20130205:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.12.23 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls.
If you use portmaster:
portmaster -r gnutls
If you use portupgrade:
portupgrade -fr security/gnutls
If you use pkgng with binary packages:
pkg install -fR security/gnutls
20130204:
AFFECTS: users of sysutils/zfstools
AUTHOR: bdrewery@FreeBSD.org
The zfstools package has dropped the 'rubygem-' prefix and now installs
its binary files to PREFIX/sbin instead of PREFIX/bin.
20130204:
AFFECTS: users of multimedia/qt4-phonon, multimedia/qt4-phonon-gst
AUTHOR: makc@FreeBSD.org
qt4-phonon has been deprecated in favour of multimedia/phonon. Remove
WITH_QT_PHONON from your make.conf and replace qt4-phonon with
multimedia/phonon:
# portmaster -o multimedia/phonon multimedia/qt4-phonon
# portmaster -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
20130204:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: az@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been removed since they've
been EOL by upstream. You will have to recompile all perl dependant
ports after updating your ports tree. Please see entry 20110517 for help.
20130204:
AFFECTS: users of dns/poweradmin
AUTHOR: Edmondas Girkantas <eg@fbsd.lt>
Some database changes have been made between version 2.1.5 and 2.1.6,
upgrading needs to be done manually by running the following SQL:
For MySQL users:
ALTER TABLE users MODIFY username VARCHAR(64) NOT NULL DEFAULT '0';
ALTER TABLE users MODIFY password VARCHAR(128) NOT NULL DEFAULT '0';
For PostgreSQL users:
ALTER TABLE users ALTER COLUMN username TYPE VARCHAR(64);
ALTER TABLE users ALTER COLUMN password TYPE VARCHAR(128);
20130203:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.9.5. kdemultimedia4, kdenetwork4,
kde-runtime and kde-workspace ports have been split, they must be
deinstalled before running any port upgrade tool:
# pkg_delete -f kdemultimedia-4\* kdenetwork-4\* \
kde-workspace-4\* kde-runtime-4\*
20130202:
AFFECTS: users of net-p2p/deluge
AUTHOR: rm@FreeBSD.org
deluge port had switched to using libtorrent-rasterbar 0.16 as backend. Since
both of the versions of libtorrent are conflicting with each other, you need
to deinstall libtorrent-rasterbar-15 and libtorrent-rasterbar-15-python first
and then update deluge as usual. Please also keep in mind, that deluge does
not work via http-proxy when libtorrent-rasterbar 0.16 is used.
20130131:
AFFECTS: users of devel/boost-libs
AUTHOR: bapt@FreeBSD.org
boost has been updated to 1.52.0. Please rebuild all ports that depends
on it:
If you use portmaster:
portmaster -w -r boost-libs
If you use portupgrade:
portupgrade -fr devel/boost-libs
If you use pkgng with binary packages:
pkg install -fR devel/boost-libs
20130129:
AFFECTS: users of textproc/elasticsearch
AUTHOR: tj@FreeBSD.org
elasticsearch has been updated to 0.20.4. This upgrade requires a
full cluster restart after installation.
Upgrade steps:
1) Shutdown all cluster nodes
2) Install elasticsearch update
3) Start all cluster nodes
20130128:
AFFECTS: users of libffi
AUTHOR jkim@FreeBSD.org
libffi has been updated to 3.0.11. Please rebuild all ports that
depends on it:
If you use portmaster:
portmaster -w -r libffi
If you use portupgrade:
portupgrade -fr devel/libffi
If you use pkgng with binary packages:
pkg install -fR devel/libffi
20130121:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
Please flush your mail queue before updating to version 201301191220.
20130116:
AFFECTS: users of games/py-anki
AUTHOR: araujo@FreeBSD.org
games/py-anki has been removed upstream and merged with games/anki.
Users of games/py-anki, from now must use games/anki.
20130114:
AFFECTS: users of www/hiawatha
AUTHOR: cs@FreeBSD.org
php-fcgi has been removed upstream from hiawatha and is not supported anymore.
It is recommended to move to another FastCGI implementation, e.g. PHP-FPM
(lang/php5).
20130113:
AFFECTS: users of security/openvpn*
AUTHOR: mandree@FreeBSD.org
security/openvpn has been upgraded to the IPv6-capable v2.3.0.
This upgrade moves easy-rsa into a separate package in
security/easy-rsa that is pre-selected as default run-time dependency,
and changes installed file layout a bit.
security/openvpn22 retains the prior OpenVPN 2.2.2 version.
If you want to continue using this version, use one of these commands:
# portmaster -o security/openvpn22 security/openvpn
or
# portupgrade -o security/openvpn22 security/openvpn
or
# pkg set -o security/openvpn:security/openvpn22
security/openvpn20 has been marked deprecated and to be removed
in half a year's time. Please migrate to a newer version soonish.
20130110:
AFFECTS: everyone using csup(1), net/cvsup, or cvs(1) to update the
ports tree
AUTHOR: wblock@FreeBSD.org
On February 28, 2013, the CVSup and CVS services will end:
http://lists.freebsd.org/pipermail/freebsd-ports-announce/2012-September/000026.html
csup(1), net/cvsup, and cvs(1) will no longer be able to update the
ports tree. Please switch to one of the alternate update methods of
portsnap(8) or devel/subversion before that time. The Handbook has
information on using these update methods:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
20130108:
AFFECTS: users of devel/libvanessa_socket, mail/perdition
AUTHOR: jhale@FreeBSD.org
The update of devel/libvanessa_socket to 0.0.12 (used by Perdition)
adds IPv6 support. If the hostname in bind_address has both IPv4 and
IPv6 addresses in DNS, then Perdition will ONLY listen on IPv6.
If you prefer to continue to use IPv4, you need to change the
bind_address in /usr/local/etc/perdition/perdition.conf to use an
explicit IPv4 address. This can be in addition to, or instead of,
the current hostname, depending on whether you want to use IPv6 or
not. If your Perdition server does not have an IPv6 address
listed in DNS, this change does not affect you.
20130108:
AFFECTS: users of sysutils/cfengine*
AUTHOR: gjb@FreeBSD.org
sysutils/cfengine has been created as a master port for the set of
sysutils/cfengine* ports. Users interested in tracking the latest
stable branch of cfengine should update their port origins to use
the new port, for example:
# portmaster -o sysutils/cfengine sysutils/cfengine33
or
# portupgrade -fo sysutils/cfengine sysutils/cfengine33
or
# pkg set -o sysutils/cfengine33:sysutils/cfengine
Users that switch their port origin and later wish to remain on
a particular cfengine release can override the default version by
adding CFENGINE_VERSION to /etc/make.conf, where CFENGINE_VERSION
is a value from:
# make -V VERSIONS
20130103:
AFFECTS: users of textproc/docproj*
AUTHOR: doceng@FreeBSD.org
textproc/docproj no longer requires WITH_JADETEX to be set to 'yes' or
'no', and by default, will enable the JADETEX dependencies.
The textproc/docproj-jadetex port has been removed as a result of this
change.
Users that have installed textproc/docproj and have set
WITH_JADETEX=no during compile time should update the package origin
to use textproc/docproj-nojadetex:
# portmaster -o textproc/docproj textproc/docproj-nojadetex
or
# portupgrade -fo textproc/docproj textproc/docproj-nojadetex
or
# pkg set -o textproc/docproj-nojadetex:textproc/docproj
Users that have installed textproc/docproj-jadetex should update the
package origin to use the textproc/docproj port:
# portmaster -o textproc/docproj textproc/docproj-jadetex
or
# portupgrade -fo textproc/docproj textproc/docproj-jadetex
or
# pkg set -o textproc/docproj-jadetex:textproc/docproj
Users that have installed textproc/docproj and have set
WITH_JADETEX=yes will not need to make any changes.
20130103:
AFFECTS: users of audio/baresip
AUTHOR: crees@FreeBSD.org
Baresip is tightly linked to the versions of audio/re and audio/rem, and
will not build against different versions.
To update without problems, the -R flag for portupgrade is mandatory, or
build will fail. Portmaster and pkgng will handle this correctly.
20130103:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: decke@FreeBSD.org
VirtualBox has been updated and does now depend on devel/kBuild instead
of devel/kBuild-devel. Both are in conflict with each other so this has
to be resolved manually. kBuild is only a build dependency so it is safe
to remove installed kBuild before updating.
# pkg_delete -f kBuild-\*
20130102:
AFFECTS: users of mail/opensmtpd
AUTHOR: ashish@FreeBSD.org
OpenSMTPD port has been updated to the latest portable snapshot. There
has been several changes to the configuration between the last version
and this version, which requires configuration file need to be reviewed.
20121230:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 9.1 released.
20121229:
AFFECTS: users of devel/libical
AUTHOR: gnome@FreeBSD.org
The devel/libical has been updated to 0.48. The shared library version has
been changed from 44 to 0. Please rebuild all ports that depends on it:
If you use portmaster:
portmaster -r libical
If you use portupgrade:
portupgrade -fr devel/libical
If you use pkgng with binary packages:
pkg install -fR devel/libical
20121228:
AFFECTS: users of databases/innotop, multimedia/zoneminder
net-mgmt/netdot, ports-mgmt/tinderbox, ports-mgmt/tinderbox-devel
sysutils/watchmen, www/MT
The above mentioned ports were converted to depend on
databases/p5-DBD-mysql. That will cause messages like
===> p5-DBD-mysql-4.021 conflicts with installed package(s):
p5-DBD-mysql55-4.021
To prevent this run one of the following commands to fix the
dependencies.
# portmaster -o databases/p5-DBD-mysql databases/p5-DBD-mysql55
or
# portupgrade -fo databases/p5-DBD-mysql databases/p5-DBD-mysql55
or
# pkg set -o databases/p5-DBD-mysql55:databases/p5-DBD-mysql
20121220:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that the Glorious Glasgow Haskell Compiler has been updated to
version 7.4.2.
Please rebuild or reinstall all dependent ports by issuing one of the
following commands, depending on the tool used:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
or
# pkg install -fR lang/ghc
20121218:
AFFECTS: users of icu
AUTHOR bapt@FreeBSD.org
icu has been updated to 50.1. Please rebuild all ports that depends on it:
If you use portmaster:
portmaster -w -r icu
If you use portupgrade:
portupgrade -fr devel/icu
If you use pkgng with binary packages:
pkg install -fR devel/icu
20121212:
AFFECTS: users of openldap24-client who uses SASL
AUTHOR: Xin Li <delphij@FreeBSD.org>
There is a change in the openldap24-client port which removes the SASL
option. If the user previously install openldap24-client, but enabled
SASL from the config menu, the user would have to replace it with
openldap24-sasl-client.
Note that this only affects those who manually set SASL from the menu,
most of the users are not affected.
If you use portmaster:
portmaster -o net/openldap24-sasl-client openldap24-client
If you use portupgrade:
portupgrade -fo net/openldap24-sasl-client openldap24-client
If you use pkgng with binary packages:
pkg set -o net/openldap24-client:net/openldap24-sasl-client
20121212:
AFFECTS: users of horde-* applications
AUTHOR: Martin Matuska <mm@FreeBSD.org>
Horde3 has reached EOL and to make place for new horde application versions
all old horde3 applications have been renamed to use the "horde3-" prefix.
20121211:
AFFECTS: users of graphics/ImageMagick
AUTHOR: bdrewery@FreeBSD.org
The ImageMagick library has been updated to version 6.8.0-7. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r ImageMagick
If you use portupgrade:
portupgrade -fr graphics/ImageMagick
If you use pkgng with binary packages:
pkg install -fR graphics/ImageMagick
20121211:
AFFECTS: users of devel/pcre
AUTHOR: bdrewery@FreeBSD.org
The pcre library has been updated to version 8.32. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r pcre
If you use portupgrade:
portupgrade -fr devel/pcre
If you use pkgng with binary packages:
pkg install -fR devel/pcre
20121210:
AFFECTS: users of security/cyrus-sasl2
AUTHOR: ume@FreeBSD.org
The cyrus-sasl2 library has been updated to version 2.1.26. Please
rebuild all ports that depend on it.
If you use portmaster:
portmaster -w -r cyrus-sasl-
If you use portupgrade:
portupgrade -fr security/cyrus-sasl2
20121202:
AFFECTS: Users of www/owncloud
AUTHOR: crees@FreeBSD.org
www/owncloud includes the entire WWWDIR directory structure in pkg-plist.
This means that if you upgrade it, your config files are added to pkg-plist,
and are then removed on the next deinstall.
This issue has been fixed, but you must back up your install of owncloud and
reinstall to avoid data loss;
# cd /usr/ports/www/owncloud
# tar cfC /tmp/owncloud.tar `make -VWWWDIR` .
# make deinstall
# tar xfC /tmp/owncloud.tar `make -VWWWDIR`
# make install clean && rm /tmp/owncloud.tar
20121201:
AFFECTS: Users of www/typo3
AUTHOR: Helmut Ritter <freebsd-ports@charlieroot.de>
www/typo3 has been repocopied to www/typo347. If you need to continue with
the old stable version please run
# portmaster -o www/typo347 www/typo3
or
# portupgrade -fo www/typo347 www/typo3
or
# pkg set -o www/typo3:www/typo347
20121128:
AFFECTS: Users of irc/znc
AUTHOR: jase@FreeBSD.org
znc has been updated to 1.0. This introduces some major changes to its
functionality. As a result, if you are upgrading from a previous version
you need to be aware that znc will automatically modify your
configuration file to incorporate support for the new functionality.
Users are recommended to take a backup of their configuration file
before running this new version.
The SASL option has been renamed to CYRUS following a rename of the
associated module. Additionally, a number of modules have been removed
or renamed in this release.
Modules that were classed as Extra modules in previous versions are now
built as standard. The EXTRA option has been removed accordingly.
Please refer to the following URL for detailed information regarding all
changes in this release:
http://wiki.znc.in/ChangeLog/1.0
20121128:
AFFECTS: Users of www/opera
AUTHOR: itetcu@FreeBSD.org
If you are running KDE and you are using KDE's File dialog toolkit, and if
your Opera crashes on start with a 'libpng error: incorrect data check'
you can work around it by setting 'Dialog Toolkit=4' in your
.opera/operaprefs.ini [File Selector] section.
20121112:
AFFECTS: Users of devel/git
AUTHOR: wxs@FreeBSD.org
The git-daemon(1) process now runs as the git_daemon user. Please make
sure that this user has appropriate permissions to the repositories.
20121109:
AFFECTS: FreeBSD < 9.1 users of syslog-ng >= 3.3.6
AUTHOR: cy@FreeBSD.org
Syslog-ng version 3.3.6 changed the way how /dev/kmsg is read. If you
don't use the system() source (which configures it automatically),
please make sure, that in the kmsg related line follow-freq(1) is used
instead of the previously default follow-freq(0).
20121109:
AFFECTS: users of devel/py-liblarch_gtk deskutils/gtg
AUTHOR: rm@FreeBSD.org
Code of py-liblarch_gtk has been merged into py-liblarch 2.1.0. To avoid
any conflicts, user need to remove py-liblarch_gtk before the update of
py-liblarch.
20121105:
AFFECTS: users of mail/postfix-current
AUTHOR: sahil@FreeBSD.org
With this version of Postfix, the default master.cf now uses "unix"
instead of "fifo" for the pickup and qmgr services. In addition, a
new smtpd_relay_restrictions feature has been introduced for mail
relay control. For sites that do not define this parameter in
main.cf, the upgrade process will add an entry to main.cf. Please
read the RELEASE_NOTES to understand this new feature, how it may
affect your site, and backwards compatibility options.
20121104:
AFFECTS: users of lang/perl5.16
AUTHOR: az@FreeBSD.org
lang/perl5.16 has been updated to 5.16.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.16.
Please see its manual page for details.
If you are using binary packages with pkgng, not ports, do this instead of
"perl-after-upgrade":
# pkg install -fR perl
20121102:
AFFECTS: users of shells/bash-completion
AUTHOR: adamw@FreeBSD.org
The bash completion library has been updated to 2.0, and the mechanism
for activating the library has changed. To use the library, you must:
source /usr/local/share/bash-completion/bash_completion.sh
from your .bashrc file. See the pkg-message or README for a more
graceful invocation.
20121101:
AFFECTS: users of graphics/tesseract
AUTHOR: bf@FreeBSD.org
The trained English and OSD language data that were distributed in
graphics/tesseract have been moved to graphics/tesseract-data. The
latter port includes all available trained language data by default;
as before, users who desire a subset of languages may build smaller
packages by defining TESSERACT_LANGS during a build.
20121031:
AFFECTS: users of dns/ldns
AUTHOR: ak@FreeBSD.org
There is a binary incompatibility in ldns 1.6.14 which is fixed with an
emergency release of ldns 1.6.15.
Warning!
If you have compiled ldns using software with ldns-1.6.14, then this new
version will be binary incompatible with your installed version. You
will have to recompile the software together with ldns-1.6.15.
Was the software compiled with ldns-1.6.13 or earlier, then you will not
have this problem and can safely install ldns-1.6.15.
20121030:
AFFECTS: users of www/squid31
AUTHOR: flo@FreeBSD.org
The WITH_SQUID_ECAP option was removed from the port. If you use ECAP
you need to update to www/squid32, you can do so by running one of the
following commands:
# portmaster -o www/squid32 www/squid31
or
# portupgrade -fo www/squid32 www/squid31
20121025:
AFFECTS: users of net/activemq
AUTHOR: tj@FreeBSD.org
After reinstalling the port if you wish to use the datastore used before
or have any undelivered persistant messages add the following to rc.conf
activemq_data=/usr/local/activemq
20121022:
AFFECTS: users of net/samba36
AUTHOR: timur@FreeBSD.org
Startup rc.d/samba script was modified to address some problems with the
fine control of supplementary daemons. As a side effect now it's always
necessary to specify in rc.conf:
samba_enable=YES
to get the script working. You can still control each of the daemons
individualy, by disabling/enabling them with:
nmbd_enable=NO
smbd_enable=NO
winbindd_enable=YES
20121015:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: bdrewery@FreeBSD.org
Portmaster now supports pkgng. To use pkgng, enable the patch in the port,
enable pkgng in your make.conf, and convert your existing /var/db/pkg
database. Also see UPDATING entry 20121010 if you are on a recent CURRENT
and do not want to use pkg.
This is optional and not currently required.
# make -C /usr/ports/ports-mgmt/pkg install clean
# make -C /usr/ports/ports-mgmt/portmaster config build deinstall install clean
# echo 'WITH_PKGNG=yes' >> /etc/make.conf
# pkg2ng
20121015:
AFFECTS: users of ports-mgmt/portupgrade
AUTHOR: bdrewery@FreeBSD.org
Portupgrade now supports pkgng. To use pkgng, enable it in your make.conf,
and convert your databases.
This is optional and not currently required.
# make -C /usr/ports/ports-mgmt/pkg install clean
# echo 'WITH_PKGNG=yes' >> /etc/make.conf
# pkg2ng
# pkgdb -fu
20121010:
AFFECTS: users of mail/enigmail*
AUTHOR: gecko@FreeBSD.org
Enigmail has been integrated into the Thunderbird / SeaMonkey build and
is available as option ENIGMAIL (enabled by default)
Before upgrading Thunderbird or SeaMonkey delete all installed enigmail
ports by running e.g.
# pkg_delete -f seamonkey-enigmail-1.4.3 thunderbird-esr-enigmail-1.4.3 \
thunderbird-enigmail-1.4.3
20121010:
AFFECTS: users of www/firefox and www/seamonkey
AUTHOR: gecko@FreeBSD.org
When using Firefox or SeaMonkey compiled with ALSA option ON it may
crash on assert in cubeb_refill_stream as described in ports/170473.
To fix either set media.use_cubeb -> false in about:config or rebuild
audio/alsa-plugins with ARIFF_OSS option disabled (default).
20121010:
AFFECTS: users of CURRENT (OSVERSION >= 1000017)
AUTHOR: bapt@FreeBSD.org
The ports tree is now using pkgng as the default package manager
for HEAD. This only affects users of CURRENT -- users of other
branches need not take any action.
To keep pkg_install as the default package manager, use the new
WITHOUT_PKGNG knob in make.conf
To make the switch:
1/ Set WITHOUT_PKGNG=yes in make.conf and upgrade all your ports to
the latest available versions using your favourite tools.
2/ Install ports-mgmt/pkg
3/ Remove WITHOUT_PKGNG from make.conf and run:
# pkg2ng
20121009:
AFFECTS: users of multimedia/vdpau-video
AUTHOR: madpilot@FreeBSD.org
vdpau-video has been renamed upstream to libva-vdpau-driver. The
port has been changed accordingly.
Please update the port origins as follows:
# portmaster -o multimedia/libva-vdpau-driver multimedia/vdpau-video
or
# portupgrade -fo multimedia/libva-vdpau-driver multimedia/vdpau-video
or
# pkg set -o multimedia/vdpau-video:multimedia/libva-vdpau-driver
20121008:
AFFECTS: users of mail/squirrelmail
AUTHOR: adamw@FreeBSD.org
The locale data, including translations and associated help files,
have been moved to mail/squirrelmail-translations. If you or your
users are using Squirrelmail in anything other than en_US, you should
install that port.
20121007:
AFFECTS: users of lang/mit-scheme
AUTHOR: olgeni@FreeBSD.org
The lang/mit-scheme port was converted to OptionsNG, and now uses
the standard PGSQL knob rather than POSTGRESQL. Be sure to check
your configuration before rebuilding.
20121006:
AFFECTS: users of devel/geany-plugins
AUTHOR: makc@FreeBSD.org
devel/geany-plugins has been updated to 1.22 and split into numerous
devel/geany-plugin-* ports. geany-plugins must be deinstalled before
running any port upgrade utility.
20121002:
AFFECTS: users of devel/clanlib
AUTHOR: jhale@FreeBSD.org
devel/clanlib has been updated to 2.3.6 and the legacy version has been
moved to devel/clanlib1 and updated to 1.0.0. Although both versions
may be installed at the same time, you should update your port origins
first since many ports that depend on clanlib will not work with the
new version.
Update your port origins as follows:
# portmaster -o devel/clanlib1 devel/clanlib
or
# portupgrade -fo devel/clanlib1 devel/clanlib
or
# pkg set -o devel/clanlib:devel/clanlib1
20120928:
AFFECTS: users of mail/maildrop
AUTHOR: madpilot@FreeBSD.org
With the update to 2.6.0 of mail/maildrop the following executable
files:
bin/deliverquota -> bin/maildrop-deliverquota
bin/maidirmake -> bin/maildrop-maildirmake
have been renamed to avoid colliding with files installed from
other ports. Man pages and html files in DOCSDIR relating to these
files have also been renamed accordingly.
20120925:
AFFECTS: users of www/linux-f10-flashplugin11
AUTHOR: eadler@FreeBSD.org
After reinstalling the port make sure to run nspluginwrapper -v -a -u
for each user that uses the plugin.
20120924:
AFFECTS: users of textproc/aspell
AUTHOR: bapt@FreeBSD.org
textproc/aspell no longer installs the english dictionary. If you need it
please install textproc/en-aspell.
20120919:
AFFECTS: users of net-mgmt/better-cacti-templates
AUTHOR: Bryan Drewery <bdrewery@FreeBSD.org>
better-cacti-templates has been renamed as the upstream has merged
with Percona Monitoring Plugins.
Update your port origins as follows:
# portmaster -o net-mgmt/percona-monitoring-plugins net-mgmt/better-cacti-templates
or
# portupgrade -fo net-mgmt/percona-monitoring-plugins net-mgmt/better-cacti-templates
or
# pkg set -o net-mgmt/better-cacti-templates:net-mgmt/percona-monitoring-plugins
20120916:
AFFECTS: users of german/webalizer2, japanese/webalizer, polish/webalizer2, portuguese/webalizer-pt_BR, portuguese/webalizer-pt_PT, ukrainian/webalizer, www/geolizer, www/webalizer
AUTHOR: dinoex@FreeBSD.org
The default Berkeley DB has changed, so existing DNS caches needs to be rebuild or choose the option BDB1 in the port.
20120913:
AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client
AUTHOR: rm@FreeBSD.org
If you have both sysutils/bacula-server and sysutils/bacula-client
installed, you need to pkg_delete them both prior to this update.
20120910:
AFFECTS: users of www/libxul
AUTHOR: gecko@FreeBSD.org
The www/libxul has been updated to 10.0 and the older version 1.9.2
has moved to www/libxul19.
If you want to stay with 1.9.2 please run the following command:
# portmaster -o www/libxul19 www/libxul
or
# portupgrade -o www/libxul19 www/libxul
or
# pkg set -o www/libxul:www/libxul19
20120909:
AFFECTS: users of www/testlink
AUTHOR: tota@FreeBSD.org
Testlink 1.9.4 was released. Before updating, you should read carefully
the included README file or go to www.teamst.org (Forum: TestLink 1.9.4
News, changes, etc) because this release requires a manual update of the
database scheme.
20120908:
AFFECTS: users of irc/bitlbee, irc/irssi-otr, net-im/climm, net-im/mcabber, net/kdenetwork4, security/kopete-otr, security/py-otr
AUTHOR: Doug Barton <dougb@FreeBSD.org>
The libotr library has been bumped in version 4.0.0, and the new version is
not compatible with the old. In order to make it possible for both versions
to coexist in the short term the old version has been moved to a new port.
If you are currently using pidgin-otr:
# pkg_delete -f pidgin-otr\*
Then:
# portmaster -o security/libotr3 security/libotr
# portmaster -r libotr
or
# portugrade -o security/libotr3 security/libotr
# portugrade -r libotr
or
# pkg set -o security/libotr:security/libotr3
20120902:
AFFECTS: users of www/apache22, www/apache22-event-mpm, www/apache22-itk-mpm, www/apache22-peruser-mpm, www/apache22-worker-mpm
AUTHOR: ohauer@FreeBSD.org
The port use now the options NG framework, this means WITH_xxx
directives are no longer valid.
Additional:
- APR only specific options like THREADS, MYSQL, PGSQL, SQLITE,
BDB and IPV6 where removed.
- PKGNAME has changed from apache-2... to apache22-2...
- PROXY is now a MULTI directive which means at last one additional
PROXY_(AJP|BALANCER|CONNECT|FTP|HTTP|SCGI) module is required.
- CGI is only a valid option for MPM prefork, peruser and itk.
20120902:
AFFECTS: users of devel/apr1
AUTHOR: ohauer@FreeBSD.org
APR was updated to 1.4.6 and APR-util was updated to 1.4.1.
Please rebuild all ports which are using functions from
APR/APR-util such as apache, subversion ...
# portmaster -r apr
or
# portupgrade -r devel/apr1
or
# pkg install -fR devel/apr1
20120902:
AFFECTS: users of math/cantor and math/kalgebra
AUTHOR: kde@FreeBSD.org
If you have both cantor and kalgebra installed, chances are that
your cantor installation is corrupted. If the file
${KDE4_PREFIX}/lib/kde4/cantor_kalgebrabackend.so is missing on
your system, rebuild cantor after updating kalgebra to 4.8.4_1 (or
later).
20120822:
AFFECTS: users of net/asterisk16, net/asterisk16-addons
AUTHOR: Florian Smeets <flo@FreeBSD.org>
asterisk16 has been unsupported upstream for a while now and has known
security vulnerabilities, therefore it was removed from the ports tree.
People still running net/asterisk16 should upgrade to net/asterisk.
First delete the asterisk addons, as they are part of asterisk now.
# pkg_delete -f asterisk16-addons\*
after that you can run one of the following
# portmaster -o net/asterisk net/asterisk16
or
# portupgrade -o net/asterisk net/asterisk16
or
# pkg set -o net/asterisk16:net/asterisk
After that you need to update your configuration. Take a look at the following
URL for the changes between 1.6 and 1.8
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE.txt
20120820:
AFFECTS: users of ports-mgmt/portupgrade-devel
AUTHOR: bdrewery@FreeBSD.org
Due to a bug introduced in 20120601, portupgrade is unable to
upgrade itself on FreeBSD 7.x. This has been fixed in 20120820.
ports-mgmt/portupgrade is not affected. To upgrade, execute the following:
# make -C /usr/ports/ports-mgmt/portupgrade-devel all deinstall install clean
20120817:
AFFECTS: users of games/unnethack
AUTHOR: knu@FreeBSD.org
The place for variable files has changed from
$PREFIX/share/unnethack to $PREFIX/var/games/unnethack. To keep
your saved files and game records, please manually move the
following files and directories to the new directory after
upgrading.
logfile
perm
record
xlogfile
bones/
level/
saves/
20120816:
AFFECTS: users of sysutils/cfengine*
AUTHOR: gjb@FreeBSD.org
The sysutils/cfengine* ports have been renamed as follows:
o sysutils/cfengine -> sysutils/cfengine22
o sysutils/cfengine3-legacy -> sysutils/cfengine32
o sysutils/cfengine3 -> sysutils/cfengine33
Users are reminded to update the port origins, for example:
# portmaster -o sysutils/cfengine22 sysutils/cfengine
or
# portupgrade -fo sysutils/cfengine22 sysutils/cfengine
or
# pkg set -o sysutils/cfengine:sysutils/cfengine22
20120815:
AFFECTS: users of lang/erlang
AUTHOR: olgeni@FreeBSD.org
The lang/erlang port was updated to R15B01. Some port options
were updated, so be sure to run "make config" in the port directory
and check your configuration before upgrading.
To upgrade Erlang and rebuild all of the dependent ports under
the new environment:
# portmaster -r erlang
or
# portupgrade -r lang/erlang
20120815:
AFFECTS: users of lang/erlang-lite
AUTHOR: olgeni@FreeBSD.org
The lang/erlang-lite port uses the same default options as
lang/erlang, which were changed some time ago.
The couchdb, rabbitmq, freeswitch-core and freeswitch-core-devel
ports have been updated to use lang/erlang rather than lang/erlang-lite.
Please check that your lang/erlang options are configured as you
wish (especially X11 support), then follow the instructions below
to update your dependencies.
# portmaster -o lang/erlang lang/erlang-lite
or
# portupgrade -fo lang/erlang erlang-lite
20120810:
AFFECTS: users of net-p2p/transmission-gtk2
AUTHOR: crees@FreeBSD.org
Unfortunately Transmission 2.61 moved the requirement for GTK to version
3.2.0, which is not yet in our tree.
Those who wish to have a graphical client can either choose transmission-qt4
in the meantime, or switch to the transmission25 ports.
A script to generate appropriate commands can be found at:
http://people.FreeBSD.org/~crees/scripts/transmission25.sh
20120808:
AFFECTS: users of www/libmicrohttpd
AUTHOR: bdrewery@FreeBSD.org
libmicrohttpd has been updated to version 0.9.21, with a shared library bump.
This requires dependent ports to be rebuilt.
# portmaster -r libmicrohttpd
or
# portupgrade -r www/libmicrohttpd
or
# pkg install -fR www/libmicrohttpd
20120804:
AFFECTS: users of graphics/libglut
AUTHOR: x11@FreeBSD.org
The libglut library is replaced by the freeglut library.
Due to shlib version bump all glut users should be rebuild.
Please follow the instructions below to upgrade.
# portmaster -o graphics/freeglut graphics/libglut
# portmaster -r freeglut
or
# env DISABLE_CONFLICTS=1 portupgrade -fo graphics/freeglut libglut\*
# portupgrade -frx freeglut freeglut
or
# pkg set -o graphics/libglut:graphics/freeglut
# pkg install -Rf graphics/freeglut
20120801:
AFFECTS: users of editors/emacs
AUTHOR: ashish@FreeBSD.org
GNU Emacs port is updated to 24.1. Emacs 23 is moved to editors/emacs23.
If you prefer to stick with Emacs 23, please specify EMACS_PORT_NAME=emacs23
in /etc/make.conf, and do:
# portmaster -o editors/emacs23 editors/emacs
or
# env DISABLE_CONFLICTS=1 portupgrade -fo editors/emacs23 editors/emacs
or
# pkg set -o editors/emacs:editors/emacs23
20120726:
AFFECTS: users of www/firefox, www/seamonkey, mail/thunderbird, www/libxul
AUTHOR: gecko@FreeBSD.org
Gecko ports were switched to use system libraries. Some of them
must be built with certain options set (default).
- graphics/png has to be installed with APNG option
- databases/sqlite3 has to be installed with SECURE_DELETE, THREADSAFE,
FTS3, UNLOCK_NOTIFY options
20120726:
AFFECTS: users of devel/pkg-config
AUTHOR: bapt@FreeBSD.org
devel/pkg-config has been replaced by devel/pkgconf
# portmaster -o devel/pkgconf devel/pkg-config
or
# portupgrade -fo devel/pkgconf pkg-config-\*
pkgng:
# pkg set -o devel/pkg-config:devel/pkgconf
# pkg install -f devel/pkgconf
20120725:
AFFECTS: users of chinese/fcitx
AUTHOR: lichray@gmail.com
The textproc/fcitx-keyboard port is merged into chinese/fcitx.
Before updating, be sure to
# pkg_delete -f fcitx-keyboard-\*
And make sure you have at least one keyboard layout based input method
enabled in fcitx-configtool, to keep the activation/deactivation of IM
panel working.
And, since chinese/fcitx-sunpinyin depends on an update to
chinese/sunpinyin
20120725:
AFFECTS: users of www/py-beautifulsoup
AUTHOR: rm@FreeBSD.org
Current www/py-beautifulsoup has been moved to www/py-beautifulsoup32,
since 4.1.1 is now current stable version.
If you prefer to stick with 3.2.0 do:
# portmaster -o www/py-beautifulsoup32 www/py-beautifulsoup
20120723:
AFFECTS: users of security/snort
AUTHOR: zi@FreeBSD.org
The database output modules have been deprecated. If you need this
functionality please look at the security/barnyard2 port.
20120723:
AFFECTS: users of graphics/ImageMagick and graphics/ImageMagick-nox11
AUTHOR: mm@FreeBSD.org
The options for ImageMagick have been changed to match commonly used
option names. If you are using a customized build, please reconfigure
your port options with "make config".
20120720:
AFFECTS: users of net/spread and net/spread4
AUTHOR: ohauer@FreeBSD.org
The ports net/spread and net/spread4 are using now the
reserved UID/GID 282 instead (user|group)next.
20120722:
AFFECTS: users of mail/mutt
AUTHOR: crees@FreeBSD.org
mail/mutt-devel has been moved to mail/mutt, since 1.5 has been around
for a while.
Should you wish to stick with version 1.4 at this time;
# portmaster -o mail/mutt14 mutt
20120721:
AFFECTS: users of audio/libogg
AUTHOR: naddy@FreeBSD.org
There is a new version of libogg (1.3.0) and the shared library version
has been bumped (ogg.7 to ogg.8). All ports that have an identifiable
direct dependency on this library have had their PORTREVISIONs bumped.
However, some ports that pull in the library indirectly may continue to
look for the old version. To ensure that all are updated, perform this
step:
# portmaster -r libogg
or
# portupgrade -rf libogg
20120717:
AFFECTS: users of ftp/proftpd
AUTHOR: mm@FreeBSD.org
The options of ProFTPD have been made much more user-friendly.
As the modules are all shared libraries, all possible modules are built
and installed. The following modules are now in separate slave ports:
databases/proftpd-mod_sql_odbc: mod_sql_odbc
databases/proftpd-mod_sql_sqlite: mod_sql_sqlite
databases/proftpd-mod_sql_tds: mod_sql_tds
net/proftpd-mod_ldap: mod_ldap and mod_quotatab_ldap
20120716:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The following port options have been reorganized:
The OPENLDAP option has been renamed to LDAP.
The MAGNET and CML options have been withdrawn in favor of new LUA option.
20120716:
AFFECTS: users of mail/postfix-current
AUTHOR: sahil@FreeBSD.org
The postscreen-to-smtpd protocol has changed. To avoid "cannot
receive connection attributes" warnings and dropped connections,
execute the command "postfix reload".
20120716:
AFFECTS: Nobody
AUTHOR: beat@FreeBSD.org
The FreeBSD ports tree switched from CVS to Subversion. A Subversion
to CVS exporter is in place to continue the support of CVSup.
20120709:
AFFECTS: users of math/metis
AUTHOR: bf@FreeBSD.org
The older version of metis has been moved to math/metis4, and
math/metis has been updated to 5.0.2. Dependent ports still use
the old API, and the different versions of metis cannot coexist, so
most users should update with:
# portmaster -o math/metis4 math/metis
# portmaster -r math/metis4
or the equivalent.
20120702:
AFFECTS: users of databases/couchdb
AUTHOR: crees@FreeBSD.org, Adam Strohl <adams-ports@ateamsystems.com>
The couchdb port has an unfortunate side effect; versions before 1.2.0
will clobber local.ini. The port will refuse to build if that file is
present and an earlier version is installed, however no such protection
can be afforded to package installation.
To upgrade from 1.1.0 and earlier, simply move PREFIX/etc/couchdb/local.ini
out of the way until the upgrade is complete.
20120702:
AFFECTS: users of net-im/mikutter
AUTHOR: tota@FreeBSD.org
The net-im/mikutter has been updated to 0.1.1.810 which is required
Ruby 1.9.2 or later. Before upgrading this port, please see the entry
20110822 in this file to upgrade Ruby to 1.9.
If you want to stay with 0.0.3 (requires Ruby 1.8.7, 1.9.2 or later),
please run the following command:
# portmaster -o net-im/mikutter003 net-im/mikutter
or
# portupgrade -o net-im/mikutter003 net-im/mikutter
20120630:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.16 is out. If you want to switch to it from, for example
lang/perl5.12, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.16):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.16 -f perl-5.12.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.16 lang/perl5.12
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
The default version for Perl has also been changed from 5.12 to 5.14.
20120623:
AFFECTS: users of sysutils/xfce4-utils
AUTHOR: xfce@FreeBSD.org
The port has been discontinued, and installs files that conflict with
the new versions of misc/xfce4-appfinder and x11-wm/xfce4-session.
# pkg_delete -f xfce4-utils-\*
# portmaster misc/xfce4-appfinder x11-wm/xfce4-session
20120618:
AFFECTS: users of databases/db5
AUTHOR: mandree@FreeBSD.org
The databases/db5 port has been upgraded to BerkeleyDB 5.3. This
entails a shared library bump.
Before upgrading this port, check if your applications use
transactional data bases, and if they do, prepare them for a log file
format upgrade. YOU MUST DO THIS BEFORE YOU UPGRADE THE DB5 PORT! See:
http://docs.oracle.com/cd/E17076_02/html/upgrading/upgrade_process.html
All packages that depend on db5 need to be rebuilt due to the shared
library version change. The full changelog is at
http://download.oracle.com/otndocs/products/berkeleydb/html/changelog_5_3.html
To upgrade the packages that need Berkeley DB 5, please
issue one of the following commands (depending on your preferred tool):
# portmaster -r db5-5
or
# portupgrade -fr databases/db5
20120616:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The lighttpd startup script has been changed and is now compatible to the
apache startup script. The "reload" subcommand now sends a SIGHUP to the
process and triggers cycling of log files. The new command "graceful"
performs a graceful restart (similiar to former "reload") and "gracefulstop"
performs a graceful stop. The "check" command has been replaced with
the "configtest" command.
20120615:
AFFECTS: users of databases/akonadi
AUTHOR: kde@FreeBSD.org
The latest Akonadi update includes critical bug fixes. Manual
intervention is required for people using local MySQL database (the
default configuration) as backend:
$ akonadictl stop
Wait a bit, and make sure that akonadiserver and akonadi_control are
not running. Kill them if needed. Then, you have two alternatives:
$ mysql_install_db --force \
--defaults-file=~/.local/share/akonadi/mysql.conf \
--datadir=~/.local/share/akonadi/db_data \
--basedir=$(dirname `dirname $(which mysql_install_db)`)
$ rm ~/.local/share/akonadi/mysql.conf
...or...
$ rm -r ~/.local/share/akonadi
In the latter case, Akonadi will have to recache your personal data
(might take a while). Akonadi is only a cache, no data will be lost.
Then:
$ akonadictl start
20120613:
AFFECTS: users of graphics/djvulibre and graphics/djvulibre-nox11
AUTHOR: bf@FreeBSD.org
DjVuLibre been updated to 3.5.25.3. The QT3 GUI that was in
graphics/djvulibre has been removed (users of this GUI should consider
switching to the new QT4 GUI in graphics/djview4), and
graphics/djvulibre-nox11 has been merged back into graphics/djvulibre.
To update DjVuLibre, you can use:
# pkg_delete djvulibre-\?.\*
# portmaster -o graphics/djvulibre djvulibre-nox11
You should then update any installed ports that link to the djvulibre shared
library: converters/pdf2djvu, graphics/djview4, graphics/okular, and --
if optional djvulibre support was enabled -- graphics/ImageMagick,
graphics/apvlv, and graphics/evince.
20120612:
AFFECTS: users of databases/postgresql-libpqxx
AUTHOR: avilla@FreeBSD.org
postgresql-libpqxx has been updated to 4.0. If you want to stick
with version 3, install postgresql-libpqxx30:
# portmaster -o databases/postgresql-libpqxx30 postgresql-libpqxx
20120612:
AFFECTS: users of graphics/gdal
AUTHOR: sunpoet@FreeBSD.org
Language bindings (Perl, PHP, Python and Ruby) have been moved to separate
ports. Please install them if required. The new ports are:
Perl binding: graphics/p5-Geo-GDAL
PHP binding: graphics/php-gdal
Python binding: graphics/py-gdal
Ruby binding: graphics/ruby-gdal
20120605:
AFFECTS: users of net/p5-ZConf
AUTHOR: vvelox@vvelox.net
Please append '.set' to all sets for the FS backend. This was done to prevent
collisions between config and set names. Previously the config
"someConfig/default" would collide with the set "default" for "someConfig".
20120603:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: haskell@FreeBSD.org
Note that The Glorious Glasgow Haskell Compiler and the Haskell Platform
have been updated to versions 7.4.1 and 2012.2.0.0, respectively. At the
same time, all Haskell ports have been updated to their latest working
versions.
To follow the changes, please issue one of the following commands
(depending on the tool used):
# portmaster -r ghc
or
# portupgrade -fr lang/ghc
20120531:
AFFECTS: users of graphics/png
AUTHOR: dinoex@FreeBSD.org
The PNG library has been updated to version 1.5.10. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r png-
If you use portupgrade:
portupgrade -fr graphics/png
20120531:
AFFECTS: users of editors/koffice-kde4
AUTHOR: kde@FreeBSD.org
KOffice 2 has been replaced by Calligra. You are encouraged to
deinstall any KOffice port and install equivalent Calligra ones:
# pkg_delete \*koffice\*
# portmaster editors/calligra <additional l10n ports>
20120530:
AFFECTS: users of databases/postgresql*-server
AUTHOR: jgh@FreeBSD.org
Affected users are those who use the crypt(text, text) function with
DES encryption in the optional pg_crypto module. Passwords affected
are those that contain characters that cannot be represented with
7-bit ASCII. If a password contains a character that has the most
significant bit set (0x80), and DES encryption is used, that character
and all characters after it will be ignored.
20120530:
AFFECTS: users of net/nss-pam-ldapd
AUTHOR: scheidell@FreeBSD.org
The net/nss-pam-ldapd port no longer provides an option for SASL. This has
been sourced out to the new net/nss-pam-ldapd-sasl port, to accommodate
users using packages (see ports/162240). Users with openldap-sasl-client
installed are encouraged to change the port's origin to:
net/nss-pam-ldapd-sasl using their favorite ports management tool.
Example for portmaster:
portmaster -o net/nss-pam-ldapd-sasl nss-pam-ldapd
20120527:
AFFECTS: users of x11-toolkits/qt4-gui
AUTHOR: kde@FreeBSD.org
Qt started using the raster graphics system engine, which relies on
shared memory. Be sure to check pkg-message.
20120525:
AFFECTS: users of deskutils/kdepim4, deskutils/kdepim4-runtime
AUTHOR: kde@FreeBSD.org
kdepim4 has been updated to 4.8.3. For those who prefer old
kdepim-4.4.11.1 deskutils/kdepim44* ports have been added.
To stay with kdepim-4.4.11.1 run the following commands:
# portmaster -o deskutils/kdepim44-runtime kdepim-runtime-4\*
# portmaster -o deskutils/kdepim44 kdepim-4\*
20120525:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.8.3. Several ports were split,
thus manual intervention into update procedure is required:
# pkg_delete -f kde-runtime-\* ruby\*-kdebindings-korundum\* \
kalgebra-4\* kdeaccessibility-4\* kdeutils-4\* kde-baseapps-\* \
plasma-applet-icontasks\*
# portmaster -a
20120518:
AFFECTS: users of dns/poweradmin
AUTHOR: Edmondas Girkantas <eg@fbsd.lt>
Some database changes have been made between version 2.1.4 and 2.1.5,
upgrading needs to be done manually by running the following SQL:
For MySQL users:
ALTER TABLE `zones` ADD `zone_templ_id` INT( 11 ) NOT NULL;
ALTER TABLE zones ENGINE = InnoDB;
ALTER TABLE zone_templ ENGINE = InnoDB;
ALTER TABLE zone_templ_records ENGINE = InnoDB;
For PostgreSQL users:
ALTER TABLE zones ADD zone_templ_id INT DEFAULT NULL;
Source: https://www.poweradmin.org/trac/wiki/ReleaseNotes/2.1.5
20120516:
AFFECTS: users of lang/php5
AUTHOR: ale@FreeBSD.org
PHP has been updated to 5.4. Suhosin patch has been disabled until the
new version will be released (soon). Suhosing extension will take more
time. LINKTHR option is now enabled by default, be sure to flag it if
you are updating using an old saved configuration. sqlite2 extension
has been permanently removed.
If you want to remain at PHP 5.3, a new port (lang/php53) has been
created for such purpose.
20120513:
AFFECTS: users of net-mgmt/smokeping
AUTHOR: lth@FreeBSD.org
Smokeping has been updated to 2.6.7, and the web server configuration
has changed. FastCGI is now preferred. Please check the documentation
that your web server configuration is OK.
20120512:
AFFECTS: users of textproc/p5-XML-SAX
AUTHOR: crees@FreeBSD.org
p5-XML-SAX (X-S) was split into p5-XML-SAX-Base (X-S-B) and p5-XML-SAX for
version 0.99. Since X-S-B now installs some files formerly installed by X-S
the package for X-S must be deinstalled before updating X-S.
# pkg_delete -fx p5-XML-SAX
# portmaster textproc/p5-XML-SAX
(users of pkgng can substitute pkg_delete with pkg delete)
20120511:
AFFECTS: users of graphics/xpdf
AUTHOR: cy@FreeBSD.org
In order to allow graphics/xpdf and graphics/poppler-utils to coexist,
graphics/xpdf binaries have been moved from ${LOCALBASE}/bin to
${LOCALBASE}/lib/xpdf. The symlink ${LOCALBASE}/bin/xpdf points to
${LOCALBASE}/lib/xpdf/xpdf. However the other utilities installed by
the xpdf port conflict with poppler-utils, no symlinks are maintained.
Applicaions and scripts which use the pdf* utilities provided by
graphics/xpdf must reference them using their new location, specify
${LOCALBASE}/lib/xpdf in $PATH, or use the same utilities provided by
graphics/poppler-utils.
20120510:
AFFECTS: users of devel/gitolite
AUTHOR: milki@rescomp.berkeley.edu
gitolite has been split into two ports: devel/gitolite for 3.x and
devel/gitolite2 for 2.x
gitolite 3.x is NOT "API" compatible with gitolite 2.x and requires
additional manual migration steps which can be found in the online
documentation.
http://sitaramc.github.com/gitolite/install.html#migr
Current users wishing to continue using gitolite 2.x should run:
# portmaster -o devel/gitolite2 gitolite
or
# portupgrade -o devel/gitolite2 gitolite
20120508:
AFFECTS: users of www/node and www/node-devel
AUTHOR: sunpoet@FreeBSD.org
npm is a package manager for node. Starting with node 0.6.17 (www/node) and
node 0.7.8 (www/node-devel), we do not install bundled npm but provide a
separate port (www/npm). Please install www/npm if you need it.
20120430:
AFFECTS: users of www/py-google-api-python-client
AUTHOR: nivit@FreeBSD.org
The port has been updated to 1.0.b8. This new version has important
changes which might break your code:
* apiclient.anyjson has moved to oauth2client.anyjson.
* Some calls, for example, taskqueue().lease() used to require
a parameter named body. In this new release only methods that
really need to send a body require a body parameter, and so
you may get errors about an unknown 'body' parameter in your call.
The solution is to remove the unneeded body={} parameter
See http://code.google.com/p/google-api-python-client/wiki/PyDoc for
more information.
20120426:
AFFECTS: users of editors/libreoffice
AUTHORS: bapt@FreeBSD.org
LOCALIZED_LANG option has gone, localised packages are now available
separately, you can also use editors/libreoffice-i18n to pick the
localisation you want.
20120425:
AFFECTS: users of mail/postfix, mail/postfix2[6-8]
AUTHOR: sahil@FreeBSD.org
The latest update to these ports adds support to turn off
the TLSv1.1 and TLSv1.2 protocols introduced in OpenSSL 1.0.1.
These protocols are known to cause inter-operability issues
with certain services, e.g. hotmail. If using TLS with Postfix,
please consult the RELEASE_NOTES for information about possible
workarounds.
20120423:
AFFECTS: users of astro/boinc-astropulse
AUTHOR: rene@FreeBSD.org
Astropulse has been updated to 6.01, which is a different application
than version 5.06. You need to have Astropulse v6 enabled in your
account under SETI@home preferences. It is also advisable to finish
and report existing Astropulse units before updating.
20120421:
AFFECTS: users of x11/xorg
AUTHOR: x11@FreeBSD.org
The default mesa has been updated to 7.6.1 and the default xorg-server
to 1.7.7.
A switch is available for people that want to use mesa 7.11.x and
xorg-server 1.10.6. This requires an nvidia card or Intel+KMS support.
If you have an intel card and can try these experimental KMS support
patches:
10/head with a patch: http://people.freebsd.org/~kib/drm/
FreeBSD stable/9 and releng/9.0:
http://lists.freebsd.org/pipermail/freebsd-x11/2012-April/011640.html
20120419:
AFFECTS: users of security/openssl
AUTHOR: dinoex@FreeBSD.org
The OpenSSL port has been updated to 1.0.1a. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r openssl
Or, if you would prefer a more gradual approach:
portmaster -w openssl (check the man page for more information)
If you use portupgrade:
portupgrade -fr security/openssl
20120418:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.3 released.
20120418:
AFFECTS: users of www/firefox and mail/thunderbird
AUTHOR: gecko@FreeBSD.org
Firefox and Thunderbird have been updated to 11.0. If you want to
stay with the Extended Support Release please use the new -esr
ports.
Firefox:
# portupgrade -o www/firefox-esr www/firefox
# portupgrade -o www/firefox-esr-i18n www/firefox-i18n (if installed)
or
# portmaster -o www/firefox-esr www/firefox
# portmaster -o www/firefox-esr-i18n www/firefox-i18n (if installed)
Thunderbird:
# portupgrade -o mail/thunderbird-esr mail/thunderbird
# portupgrade -o mail/thunderbird-esr-i18n \
mail/thunderbird-i18n (if installed)
or
# portmaster -o mail/thunderbird-esr mail/thunderbird
# portmaster -o mail/thunderbird-esr-i18n \
mail/thunderbird-i18n (if installed)
20120418:
AFFECTS: users of www/chpasswd
AUTHOR: madpilot@FreeBSD.org
Previous version of the chpasswd port put the configuration file
in the pkg-plist, causing it to be removed on deinstall.
Users are advised to make a backup copy of the configuration file
before upgrading. This has been fixed and will not happen anymore
in future updates.
20120415:
AFFECTS: users of irc/ircd-ratbox
AUTHOR: scheidell@FreeBSD.org
Ircd-ratbox has been updated to follow the current stable release
branch (3.0.x). All previous branches are no longer supported by the
ratbox team.
Users of ircd-ratbox are advised to create new ircd configuration
files based on the examples provided.
20120404:
AFFECTS: users of net-mgmt/net-snmp
AUTHOR: zi@FreeBSD.org
The net-snmp startup script now specifies a new pid_file to avoid a
conflict that existed with bsnmpd. As a result, the startup script
cannot find currently running versions of snmpd.
You will need to either stop the daemon before upgrading or locate the
PID of snmpd and manually kill it after upgrade. Then, start the daemon
as you normally would.
20120326:
AFFECTS: users of www/tomcat7
AUTHOR: ale@FreeBSD.org
Tomcat 7 startup script now uses 'jsvc' to monitor the daemon's process.
A few rc.conf variables has been changed, be sure to adapt your
configuration, if needed.
20120318:
AFFECTS: users of mail/dbmail
AUTHOR: rm@FreeBSD.org
dbmail 3.0 is now available.
There are a number of significant changes including Dependencies,
Config, Schema and Server changes.
Without required modifications, dbmail will not run and you will
no longer have access to your emails. See UPGRADING for details.
Don't forget to backup and fully test before upgrading.
To stick with version 2.2.x run:
# portupgrade -o mail/dbmail22 mail/dbmail
or
# portmaster -o mail/dbmail22 mail/dbmail
20120313:
AFFECTS: users of x11-toolkits/qt4-gui
AUTHOR: kde@FreeBSD.org
MIT-SHM problem (blank windows in Marble and KDE-Games) has been
fixed, kern.ipc.shm_allow_removed=1 is not needed anymore to
workaround it.
20120311:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: linimon@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been restored from the Attic
in order to give a FreeBSD-style deprecation cycle. However, users
are advised to upgrade to perl5.12 as soon as feasible.
20120308:
AFFECTS: users of lang/perl5.8 and lang/perl5.10
AUTHOR: pgollucci@FreeBSD.org
lang/perl5.8 and lang/perl5.10 have been removed since they've
been EOL upstream for 3yrs and 2yrs respectively. The default
of lang/perl5.12 has not changed (yet). Conditional checks for
perl < 5.12 have been removed. UNLESS you have PERL_VERSION=5.8.x
or PERL_VERSION=5.10.x in /etc/make.conf you need take no action.
If you do, you will have to recompile all perl dependant ports after
updating your ports tree. Please see entry 20110517 for help.
20120225:
AFFECTS: users of archivers/libarchive
AUTHOR: glewis@FreeBSD.org
libarchive has been updated to version 3.0.3, with a shared library bump.
This requires dependent ports to be rebuilt.
# portmaster -r libarchive
or
# portupgrade -r archivers/libarchive
20120221:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: decke@FreeBSD.org
virtualbox-ose has been updated to 4.1.8 and requires the latest
devel/kBuild-devel now. It is only a build dependency so it is safe
to remove it before updating.
# pkg_delete -f kBuild-\*
20120220:
AFFECTS: users of graphics/libungif
AUTHOR: dinoex@FreeBSD.org
libungif is obsolete, please deinstall it and rebuild all ports using
it with graphics/giflib.
# portmaster -o graphics/giflib graphics/libungif
# portmaster -r giflib
or
# portupgrade -o graphics/giflib graphics/libungif
# portupgrade -rf giflib
20120216:
AFFECTS: users of multimedia/libvpx
AUTHOR: ashish@FreeBSD.org
libvpx has been updated to version 1.0.0, with a shared library bump.
This requires dependencies to be rebuilt.
# portmaster -r libvpx
or
# portupgrade -r multimedia/libvpx
20120214:
AFFECTS: users of net/libexosip2
AUTHOR: jgh@FreeBSD.org
libexosip2 has been updated with a shared library bump.
This requires dependencies to be rebuilt.
# portmaster -r libexosip2
or
# portupgrade -rf libexosip2-3.\*
20120214:
AFFECTS: users of devel/pcre
AUTHOR: dougb@FreeBSD.org
Until all dependent ports have been updated you should update pcre in
a manner that will preserve its old shared library. For example:
# portmaster -w devel/pcre
or
# portupgrade devel/pcre
20120213:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: pgj@FreeBSD.org
GHC has been updated to version 7.0.4, and Haskell Platform to version
2011.4.0.0, and other Haskell ports are also updated to their Haskell
Platform versions or latest versions.
To update all affected ports:
# portmaster -r lang/ghc
or
# portupgrade -r lang/ghc
20120210:
AFFECTS: users of mail/postfix
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
Postfix 2.9.0 contains several major changes, some of which could
result in incompatible or unexpected behavior. Regardless of the
version from which you are upgrading, please carefully review the
RELEASE_NOTES before proceeding.
20120126:
AFFECTS: users of ftp/proftpd and ftp/proftpd-mysql
AUTHOR: Martin Matuska <mm@FreeBSD.org>
The proftpd port has been updated to 1.3.4 and changed to use
dynamically loadable modules. Please add corresponding LoadModule
directives to your configuration file, like in the following example:
LoadModule mod_tls.c
The modules mod_sql_mysql and mod_sql_postgres are now outside of the
main proftpd port:
databases/proftpd-mod_sql_mysql
databases/proftpd-mod_sql_postgres
The proftpd-mysql port has been removed, use the alternative port:
databases/proftpd-mod_sql_mysql
20120121:
AFFECTS: users of multimedia/vdr
AUTHOR: Juergen Lock <nox@FreeBSD.org>
The vdr ports have been updated to 1.7.22 which involves at least
two changes:
- svdrpsend.pl is now called svdrpsend.
- The ttxtsubs channels.conf format has changed so if you use that
plugin you need to edit /usr/local/etc/vdr/channels.conf for the
channels you want to receive teletext subtitles on - see:
/usr/local/share/doc/vdr-plugin-ttxtsubs/HISTORY
20120116:
AFFECTS: users of mail/postfix-current
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
From the upstream RELEASE_NOTES:
Instead of terminating immediately with a "fatal" message when a
database file can't be opened, a Postfix daemon program now logs
an "error" message, and continues execution with reduced
functionality.
Specify "daemon_table_open_error_is_fatal = yes" to get the
historical behavior (immediate termination with "fatal" message).
Logfile-based alerting systems may need to be updated to look for
"error" messages in addition to "fatal" messages.
By default the Postfix SMTP server no longer reports transcripts
of sessions where a client command is rejected because a table is
unavailable. To receive such reports, add the new "data" class to
the notify_classes parameter value. The reports will be sent to the
error_notice_recipient address as before. This class is also used
by the Postfix SMTP client to report about sessions that fail
because a table is unavailable.
20120116:
AFFECTS: users of x11/xcb-util
AUTHOR: garga@FreeBSD.org
x11/xcb-util was updated to 0.3.8 and was split in new modules.
Dependencies were adjusted but main port symbols were moved to a single
library, xcb-util.so. For this reason, all dependent ports must be
recompiled.If you use portmaster, run:
# portmaster -R -r xcb-util-0
Or for portupgrade:
# portupgrade -r xcb-util-0\*
20120112:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 9.0 released.
20120109:
AFFECTS: users of www/p5-WWW-GitHub-Gist
AUTHOR: lbr@FreeBSD.org
gist command was moved into new www/p5-App-gist port.
20120109:
AFFECTS: ports using Apache Software License 2.0
AUTHOR: tabthorpe@FreeBSD.org
The correct acronym for Apache Software License 2.0 is really AL2.
20120109:
AFFECTS: users of graphics/inkscape:
AUTHOR: bsam@FreeBSD.org
Before updating graphics/inkscape to version 0.48.2 one should deinstall
the port graphics/libwpg01.
20120108:
AFFECTS: users of devel/p5-CPAN-Meta and devel/p5-Version-Requirements
AUTHOR: sunpoet@FreeBSD.org
Author of Version::Requirements (devel/p5-Version-Requirements) merged
its function to CPAN::Meta::Requirements (part of devel/p5-CPAN-Meta).
As a result, devel/p5-Version-Requirements is marked DEPRECATED.
Please run the following commands to update p5-CPAN-Meta and remove
p5-Version-Requirements:
# portmaster -o devel/p5-CPAN-Meta devel/p5-Version-Requirements
# pkg_delete p5-Version-Requirements-\*
20120104:
AFFECTS: users of devel/thrift, py-thrift, php5-thrift, p5-thrift
AUTHOR: scheidell@FreeBSD.org
Users upgrading thrift from 0.6.1, please take note: library structure
and versions have changed, and are not compatible with 0.7.0+
20111231:
AFFECTS: users of lang/newlisp
AUTHOR: olgeni@FreeBSD.org
In lang/newlisp, the MYSQL5 and MYSQL51 options have been unified into
MYSQL, which will pick the correct MySQL version using the standard
MySQL selection logic. MySQL users will have to run "make config" and
select the MYSQL option.
Tinderbox users will have to update their options files with the new
MYSQL option, and possibly change their Tinderbox environment to select
a specific MySQL version.
20111229:
AFFECTS: users of ftp/proftpd{-devel,-mysql}
AUTHORS: delphij@FreeBSD.org,mm@FreeBSD.org
Due to the nature of the way FreeBSD-SA-11:07.chroot is implemented,
users have to update to latest -STABLE, -CURRENT, or supported
security branch to use the chroot functionality in these ports.
Please see the security advisory for more details.
20111219:
AFFECTS: users of lang/perl5.14
AUTHOR: skv@FreeBSD.org
lang/perl5.14 has been updated to 5.14.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.14.
Please see its manual page for details.
If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
follow instructions in the entry 20110517 in this file.
20111205:
AFFECTS: users of ruby-gnome ports
AUTHOR: swills@FreeBSD.org
ruby-gnome has been updated to 1.0.3. Some of them have been removed
since they are no longer included upstream. The meta port is
now x11/ruby-gnome2. To update run the following command:
# portmaster -o x11/ruby-gnome2 x11/ruby-gnome2-all
You may also wish to remove the old ports using:
# portmaster -s
20111130:
AFFECTS: users of dns/nsd
AUTHOR: zi@FreeBSD.org
The database format of nsd.db has changed as of version 3.2.9.
Before you run nsd, you must convert the existing database:
# nsdc rebuild
20111123:
AFFECTS: users of net-im/kopete or net-im/libjingle
AUTHOR: kde@FreeBSD.org
kopete and libjingle are now depending on a newer oRTP from
linphone-base. To correctly switch to the new port, you need to deinstall
ortp prior to the update:
# pkg_delete -f ortp-\*
20111123:
AFFECTS: users of databases/redis
AUTHOR: osa@FreeBSD.org
The redis configuration file, redis.conf, have been changed, some options
removed in newer versions (>=2.4). In some cases, redis-server with
older configuration might does not run at startup.
If you run into startup problems, re-edit configuration file.
20111101:
AFFECTS: users of x11/kde4-workspace
AUTHOR: kde@FreeBSD.org
If your KDM fails with the message
'X server "/usr/bin/X" cannot be executed'
you need to delete its configuration file and restart it:
# rm /usr/local/kde4/share/config/kdm/kdmrc
# service kdm4 restart
20111101:
AFFECTS: users of graphics/poppler-gtk
AUTHOR: Koop Mast <kwm@FreeBSD.org>
Poppler was update to 0.18.0, and the gtk slave port was renamed to
match the library it installs. Please run the following command to migrate.
# portmaster -o graphics/poppler-glib poppler-gtk-0.16.7
20111031:
AFFECTS: users of textproc/py-creole
AUTHOR: Stanislav Svirid <count@211.ru>
Some API is changed: replace 'parser_kwargs' and 'emitter_kwargs'
with separate arguments. More information on new API:
http://code.google.com/p/python-creole/wiki/API
20111025:
AFFECTS: users of print/flpsed or www/dillo2
AUTHOR: bf@FreeBSD.org
The new versions of flpsed and dillo have switched from
x11-toolkits/fltk2 to the new fltk 1.3.0 from x11-toolkits/fltk.
Users who have customizations specific to fltk2 may need to consult
the fltk 1.3 documents in order to adjust their local settings. For
dillo, some commonly-used key bindings have changed, and new
configuration options are available: consult dillorc.dist and
keysrc.dist for details.
20111019:
AFFECTS: users of mail/thunderbird or www/seamonkey with lightning
plugin installed.
AUTHOR: gecko@FreeBSD.org
To get an up to date version of lightning you should use the new
LIGHTNING option in mail/thunderbird or www/seamonkey. This option
is not enabled by default so you have to run "make config" prior
to the build. The old deskutils/lightning-thunderbird and
deskutils/lightning ports should no longer be used and will be
removed very soon.
Like other XPIs ports, lightning now registers itself as a global
extension and doesn't create the XPI to be installed manually.
Upgrading users should remove lightning from their profile before
installing Thunderbird or SeaMonkey the first time with the new
LIGHTNING option enabled.
20111018:
AFFECTS: users of mail/postfix-current
AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
The default smtp_address_preference value is now "any" instead
of "ipv6", meaning choose randomly between IPv6 and IPv4. With
this the Postfix SMTP client will have more success delivering
mail to sites that have problematic IPv6 configurations.
20111016:
AFFECTS: users of devel/p5-subversion-freebsd
AUTHOR: wxs@FreeBSD.org
devel/p5-subversion-freebsd has been removed as it is no longer necessary.
If you have it installed please run the following to switch to
devel/p5-subversion:
portmaster -o devel/p5-subversion p5-subversion-freebsd
Please also see the second entry below (20111016) if haven't upgraded
subversion yet.
20111016:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC has been updated to 4.7.2. A number of files were moved between
packages and several ports were split, thus manual intervention into
update procedure is required:
# pkg_delete -f raptor-1\* kdelibs-4\* kdebase-\*4\* \
kdeaccessibility-4\* kdeedu-4\* kdegames-4\* kdegraphics-4\* \
kdesdk-4\* kdeutils-4\* konq-plugins-4\* ktts\* nepomukcontroller\* \
ruby\*-kdebindings\* kdebindings-smoke\*
# pkg_delete -f kdehier4\*
# mv /usr/local/kde4/etc/pam.d/* \
/usr/local/etc/pam.d/
# mv /usr/local/kde4/etc/rc.d/* \
/usr/local/etc/rc.d/
# mv /usr/local/kde4/share/dbus-1/services/* \
/usr/local/share/dbus-1/services/
# mv /usr/local/kde4/share/dbus-1/system-services/* \
/usr/local/share/dbus-1/system-services/
# rmdir /usr/local/kde4/etc/pam.d /usr/local/kde4/etc/rc.d \
/usr/local/kde4/share/dbus-1/*services
# rm -r /var/tmp/kdecache-*
# portmaster misc/kdehier4
If you have - or plan to install - net/kdenetwork4, also run:
# portmaster -o net/linphone-base ortp
Finally:
# portmaster -a
Also, remove /usr/local/kde4/etc/rc.d from local_startup in rc.conf(5).
Failure to do this will cause all enabled scripts in /usr/local/etc/rc.d
to be started twice.
Remember to check for missing ports, bearing in mind that x11/kdebase4*
ports were replaced by x11/kde4-* ones, ktts was replaced by jovie, while
konq-plugins-kde4 and nepomukcontroller were removed. Then:
# portmaster --check-depends
You're also encouraged to run `pkg_cutleaves` or similar to check for
orphaned ports.
Please, note that `pkg_add -r kde4` will not install Plasma scriptengines
and printer utilities by default anymore, and `pkg_add -r kdegames4` will
not install Kajongg. This was made to avoid depending by default on
kdebindings.
20111016:
AFFECTS: users of devel/subversion, devel/subversion-freebsd,
devel/p5-subversion, devel/py-subversion,
devel/ruby-subversion and java/subversion-java and
all dependand ports.
AUTHOR: Lev Serebryakov <lev@FreeBSD.org>
Subversion was updated to version 1.7.0 and port was reworked.
Now there is no "devel/subversion-freebsd" port. All FreeBSD-specific patches
are incorporated into main subversion port as options, which are turned ON by
default.
These options are:
P4_STYLE_MARKERS -- change conflict markers to P4 style,
established for FreeBSD projects.
This is not mandatory for working with
FreeBSD sources.
ENHANCED_KEYWORD -- Support for custom keywords, like
$ FreeBSD $ in sources.
This is MANDATORY for working with
FreeBSD sources.
FREEBSD_TEMPLATE -- Standard FreeBSD commit template.
It is RECOMMENDED for working with
FreeBSD sources.
Also, subversion 1.7.0 changes the working copy format,
and a working copy can not be shared between
subversion 1.7.0 and 1.6.x. Please, think twice before
upgrading.
Additional the port "devel/subversion16" was created to
support subversion 1.6.x. Subversion 1.7.x and 1.6.x
can not be installed simultaneously!
Binding ports can be built with Subversion 1.7.0 (Default)
or with Subversion 1.6.x. To build bindings with subversion 1.6.x
you should set variable WITH_SUBVERSION_VER to "16".
There are several ways to upgrade, depending on what you used
before and what you want to get after upgrade.
(a) You use devel/subversion without FreeBSD patches and, maybe,
some bindings. You want fresh'n'new subversion 1.7.0.
Please, run:
# cd /usr/ports/devel/subversion && make config
<deselect first three options described above, if you want it>
# portupgrade -r devel/subversion
or
# portmaster -R -r subversion-1.6
(b) You use devel/subversion-freebsd and, maybe, some
bindings. You want fresh'n'new subversion 1.7.0, again
with FreeBSD patches.
Please, run:
# cd /usr/ports/devel/subversion && make config
<make sure that first three options are selected>
# portupgrade -o devel/subversion devel/subversion-freebsd
# portupgrade -r devel/subversion
or
# portmaster -o devel/subversion devel/subversion-freebsd
# portmaster -R -r subversion-1.7
(c) You use devel/subversion without FreeBSD patches and, maybe,
some bindings. You want good old subversion 1.6.x, again
without again.
Please, run:
# cd /usr/ports/devel/subversion16 && make config
<deselect first three options described above, if you want it>
# portupgrade -o devel/subversion16 devel/subversion
# portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
or
# portmaster -o devel/subversion16 devel/subversion
# portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
(d) You use devel/subversion-freebsd and, maybe, some bindings.
You want good old subversion 1.6.x, with FreeBSD patches.
Please, run:
# cd /usr/ports/devel/subversion16 && make config
<make sure, that first three options are selected>
# portupgrade -o devel/subversion16 devel/subversion-freebsd
# portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
or
# portmaster -o devel/subversion16 devel/subversion-freebsd
# portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
20111005:
AFFECTS: users of lang/erlang
AUTHOR: Jimmy Olgeni <olgeni@FreeBSD.org>
Following the R14B04 upgrade the JAVA, X11, WX and ODBC port
options have been set to OFF by default; this will allow to replace
lang/erlang-lite with lang/erlang for headless operation in the
near future.
If you need any of these options, run "make config" in lang/erlang
before upgrading, or set your make.conf accordingly.
20111003:
AFFECTS: users of math/qhull
AUTHOR: Stephen Montgomery-Smith <stephen@FreeBSD.org>
The port math/qhull has been moved to math/qhull5, and math/qhull has been
updated to a version that is incompatible with all ports previously using
math/qhull. If you are upgrading a port that has math/qhull as a dependency,
please delete the port math/qhull first, so that math/qhull5 is properly
made as a dependency.
20110929:
AFFECTS: users of net/py-zope.proxy, devel/py-zope.testing and
devel/py-zope.interface
AUTHOR: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Several Zope ports have been renamed for consistency with their
upstream distributions. Please run the following commands to update
your local installations:
If you use portmaster run:
# portmaster -o devel/py-zope.interface devel/py-zopeInterface
# portmaster -o net/py-zope.proxy net/py-zopeproxy
# portmaster -o devel/py-zope.testing devel/py-zopetesting
If you use portupgrade run:
# portupgrade -o devel/py-zope.interface devel/py-zopeInterface
# portupgrade -o net/py-zope.proxy net/py-zopeproxy
# portupgrade -o devel/py-zope.testing devel/py-zopetesting
20110928:
AFFECTS: users of 10-current
AUTHOR: eadler@FreeBSD.org
There are known issues installing ports on FreeBSD 10+ due to
bogus assumptions by various build scripts. This will not be fixed
until 9-RELEASE is released.
There are two workarounds:
1) Set UNAME_r=9.9-CURRENT in your environment
2) Set REVISION="9.9" in ${SRCDIR}/sys/conf/newvers.sh
20110928:
AFFECTS: users of www/nginx-devel
AUTHOR: osa@FreeBSD.ORG
Note: 1.1.4 release introduces several API changes which may affect
third-party modules.
20110925:
AFFECTS: users of lang/python*
AUTHOR: lwhsu@FreeBSD.org
The HUGE_STACK_SIZE option has been removed, now Python will use default
thread stack size of the system. If you want to change it, specify it
with -DTHREAD_STACK_SIZE=<size> in CFLAGS.
20110925:
AFFECTS: users of net/openldap*
AUTHOR: ume@FreeBSD.org
The security/cyrus-sasl2 was updated to 2.1.25. If the SASL option
is enabled (disabled by default), net/openldap* must be recompiled
after upgrading cyrus-sasl2.
20110921:
AFFECTS: users of devel/maven2 and devel/maven3
AUTHOR: hq@FreeBSD.org
The devel/maven2 and devel/maven3 now rely on a wrapper port:
devel/maven-wrapper. If you plan to upgrade the devel/maven[23] ports, you
will have to uninstall all of them before reinstalling them.
20110917:
AFFECTS: users of misc/tvbrowser
AUTHOR: lme@FreeBSD.org
From version 3.0.2 on TV-Browser doesn't include any plugins any longer. You
are supposed to download the plugins manually, this also means that you need
to download the appropriate channel sources plugin for your country. After
installing it your previously configured channels are visible again. To do so,
select "Tools -> Install / Update Plugins..." and choose the plugins you need.
20110915:
AFFECTS: users of dns/unbound
AUTHOR: sem@FreeBSD.org
unbound supports GOST from version 1.4.12 but only if dns/ldns was build
with GOST support too. There is no way to check the option when unbound
builds, so you should make sure the option is on in both unbound and lds.
20110914:
AFFECTS: users of www/asterisk-stat
AUTHOR: flo@FreeBSD.org
asterisk-stat depends on asterisk16 now, you will need to update asterisk
and asterisk-addons to 1.6. Instructions on upgrading your configuration
files are here:
http://svnview.digium.com/svn/asterisk/branches/1.6.2/UPGRADE-1.6.txt
If you use portmaster run:
# portmaster -o net/asterisk16 net/asterisk14
# portmaster -o net/asterisk16-addons net/asterisk14-addons
If you use portupgrade run:
# portupgrade -o net/asterisk16 net/asterisk14
# portupgrade -o net/asterisk16-addons net/asterisk14-addons
20110909:
AFFECTS: users of net/p5-SOAP-Lite
AUTHOR: az@FreeBSD.org
SOAP::Transport::TCP is not a part of net/p5-SOAP-Lite
distribution since version 0.714. If you need SOAP::Transport::TCP
you should install net/p5-SOAP-Transport-TCP manually.
20110901:
AFFECTS: users of databases/db51
AUTHOR: mandree@FreeBSD.org
The databases/db51 port (Oracle Berkeley DB version 5.1) has been
removed. Version 5.2 of the package is available in databases/db5.
Users of ports that depend on the removed 5.1 versions are advised
to rebuild the affected ports.
20110830:
AFFECTS: users of lang/racket
AUTHOR: olgeni@FreeBSD.org
Racket has been upgraded to version 5.1.3. Due to the recent rewrite of
the Racket graphics handling code, it is no longer possible to build
this port without X11.
The WITHOUT_X11 switch now controls if X11 is brought in as
USE_GNOME/LIB_DEPENDS or BUILD_DEPENDS.
In the latter case you will be able to build a Racket package that can
then be deployed on a headless server.
20110829:
AFFECTS: users of security/maia
AUTHOR: Janky Jay, III <ek@purplehat.org>
There have been many changes to the maia port, including renaming the rc
script and variables from maia to maiad. You will need to replace any
instances of maia with maiad in /etc/rc.conf, as well as renaming /var/amavisd
to /var/maiad. The 'vscan' user's home directory also needs to be changed to
/var/maiad.
These can be done by:
# mv /var/amavisd /var/maiad
# sed -i.bak -e "s/^maia_/maiad_/" /etc/rc.conf
# pw usermod vscan -d /var/maiad
20110828:
AFFECTS: users of print/cups-{base,client,image}
AUTHOR: sahil@FreeBSD.org
During the update to 1.4.8, the GNUTLS option was changed from ON to
OFF by default. Because old configuration options are saved, users
should re-run 'make config' and explicitly deselect the GNUTLS option
before upgrading.
20110823:
AFFECTS: users of lang/ruby
AUTHOR: swills@FreeBSD.org
The default ruby version has been reverted from 1.9 to 1.8. If you followed
the procedure in the 20110822 entry, you may need to follow these steps:
If you use portmaster:
# portmaster -o lang/ruby18 lang/ruby19
# portmaster -R -r ruby-1.8
If you use portupgrade:
# portupgrade -f lang/ruby19
# portupgrade -f lang/ruby18 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.9.\* -fr lang/ruby19
If you wish to keep the 1.9 version as default, add the following lines
to your /etc/make.conf file:
#
# Keep ruby 1.9 as default version.
#
RUBY_DEFAULT_VER=1.9
20110823:
AFFECTS: users of devel/libnotify and net/libproxy
AUTHOR: gnome@FreeBSD.org
libnotify and libproxy are updated with shared library bumps.
This requires dependancies to be rebuild.
# portmaster -r libnotify-0
# portmaster -r libproxy-0
# portmaster -a
or
# portupgrade -rf libnotify-0.\* libproxy-0.\*
# portupgrade -aR
20110822:
AFFECTS: users of lang/ruby
AUTHOR: stas@FreeBSD.org
The default ruby version has been updated to 1.9. Please rebuild all ports that
depends on it.
If you use portmaster:
# portmaster -o lang/ruby19 lang/ruby18
# portmaster -R -r ruby-1.9
If you use portupgrade:
# portupgrade -f lang/ruby18
# portupgrade -f lang/ruby19 # if you have it installed
# portupgrade -f ports-mgmt/portupgrade
# portupgrade -x ruby-1.8.\* -fr lang/ruby18
After these steps are complete, you can pkg_delete ruby 1.8 if you
no longer need it.
If you wish to keep the 1.8 version as default, add the following lines
to your /etc/make.conf file, and rebuild lang/ruby18 after that.
#
# Keep ruby 1.8 as default version.
#
RUBY_DEFAULT_VER=1.8
20110822:
AFFECTS: users of graphics/opencv
AUTHOR: mm@FreeBSD.org
OpenCV python module was moved to own port: graphics/py-opencv
20110820:
AFFECTS: users of www/apache* and depending ports
AUTHOR: ohauer@FreeBSD.org
The default apache version changed from www/apache13 to www/apache22.
Users who will continue with apache13 should create the following entry
in /etc/make.conf
APACHE_PORT= www/apache13
20110818:
AFFECTS: users of mail/enigmail-* ports
AUTHOR: ale@FreeBSD.org
Like other XPIs ports, enigmail now registers itself as a global
extension and doesn't create the XPI to be installed manually.
Upgrading users should remove enigmail from their profile before
installing the new port.
20110815:
AFFECTS: users of sysutils/swapexd
AUTHOR: crees
swapexd used to clobber its config file on deinstall, unfortunately this will
not be fixed in installed packages. Back up your config before updating, or
you will lose it!
# cp /usr/local/etc/swapexd/swapexd.conf ~/swapexd.conf.bak
20110808:
AFFECTS: users of net-mgmt/zenoss
AUTHOR: pphillips@experts-exchange.com
Some functionality of zenoss requires a valid shell. The FreeBSD port until
now was installing a user account without a shell. To fix your existing
installation, please run the following command as root:
# pw usermod zenoss -s /bin/sh -d /usr/local/zenoss
20110808:
AFFECTS: users of dns/powerdns
AUTHOR: tremere@cainites.net
The port has been updated to PowerDNS 3.0, which includes support for DNSSEC.
Before upgrading please read the following:
http://doc.powerdns.com/upgrades.html#from2.9to3.0
Make sure to read the documentation and wiki on http://powerdnssec.org/ on
how to enable DNSSEC mode in the configuration-file and for the necessary
database changes.
Take note that not all backends support DNSSEC. The ones that do are BIND,
SQLite3 and Generic MySQL and PgSQL.
20110808:
AFFECTS: users of security/amavisd-new
AUTHOR: sahil@FreeBSD.org
Along with new features and bug fixes, amavisd-new 2.7.0 introduces some
incompatibilities with previous releases. Several variable defaults, SQL
schemas, and other changes warrant a careful review of the RELEASE_NOTES.
Also note that helper programs amavis.c and amavis-milter.c are no longer
distributed with this package; for milter functionality, please shift to
the dedicated security/amavisd-milter port.
20110731:
AFFECTS: users of lang/guile
AUTHOR: jlaffaye@FreeBSD.org
guile has been updated to version 1.8.8. Please rebuild all ports that
depends on it.
If you use portmaster:
# portmaster -r guile
If you use portupgrade:
# portupgrade -fr lang/guile
20110731:
AFFECTS: users of www/typo3
AUTHOR: Helmut Schneider <jumper99@gmx.de>
www/typo3 has been repocopied to www/typo345. If you need to continue with
the old stable version please run
# portmaster -o www/typo345 www/typo3
or
# portupgrade -o www/typo345 www/typo3
Please remember to change the path of your config files too.
20110730:
AFFECTS: users of x11-toolkits/gtk20
AUTHOR: gnome@FreeBSD.org
The gtk-update-icon-cache utility has been split out of the gtk20 port.
Use the following instructions to update your system.
# pkg_delete -f gtk-2.\*
# portmaster x11-toolkits/gtk20
# portmaster -a
20110726:
AFFECTS: users of devel/msp430-gcc
AUTHOR: lev@FreeBSD.org
msp430-gcc was updated to lates gcc-4.5.3 version.
If you want to use old gcc-3.4.4, run command:
# portmaster -o devel/msp430-gcc3 devel/msp430-gcc
or
# portupgrade -o devel/msp430-gcc3 devel/msp430-gcc
before updating devel/msp430-libc port.
20110721:
AFFECTS: users of games/megaglest
AUTHOR: smoeller@nichthelfer.de
If you upgraded from version 3.4.0, your personal settings are stored in
~/.megaglest3.4.0. If you copy glestuser.ini and glestuserkeys.ini to
~/.megaglest, you will have your old settings again.
20110721:
AFFECTS: users of security/gpgme
AUTHOR: jlaffaye@FreeBSD.org
gpgme has been updated to version 1.3.1. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r gpgme
If you use portupgrade:
# portupgrade -fr security/gpgme
20110718:
AFFECTS: users of hungarian/hunspell
AUTHOR: jlaffaye@FreeBSD.org
The hunspell port has been moved to textproc/hunspell.
To update the installed port run the command
# portmaster -o textproc/hunspell hungarian/hunspell
or
# portupgrade -o textproc/hunspell hungarian/hunspell
20110711:
AFFECTS: users of java/openjdk6
AUTHOR: jkim@FreeBSD.org
java/openjdk6 has been updated to b23 and "WEB" option (for web browser
plug-in and Java Web Start) has been deprecated. If you need the same
functionality, rebuild the port with "ICEDTEA" option first, then install
a new port java/icedtea-web with "PLUGIN" option (default). Also, if you
have a symlink to the previous IcedTeaPlugin.so in ~/.mozilla/plugins,
for example, you need to remove it. Note system-wide symlinks are now
automatically created by java/icedtea-web for your convenience.
20110711:
AFFECTS: users of www/p5-libwww
AUTHOR: mandree@FreeBSD.org
portmaster cannot process the upgrade of www/p5-libwww from version
5 to version 6. To upgrade p5-libwww, use portupgrade instead, or
deinstall p5-libwww before reinstalling:
If you use portmaster:
# pkg_delete -f 'p5-libwww-5*' ; portmaster www/p5-libwww
If you use portupgrade, no special treatment is necessary.
20110711:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to version 4.8. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r icu
If you use portupgrade:
# portupgrade -fr devel/icu
20110706:
AFFECTS: users of multimedia/zoneminder
AUTHOR: bsam@FreeBSD.org
RC script was renamed from zm to zoneminder. So do variables at
/etc/rc.conf[.local]. One should fix the latter file.
20110705:
AFFECTS: users of security/libgcrypt and any port that depends on it
AUTHOR: swills@FreeBSD.org
The libgcrypt port has been updated to 1.5.0 and all shared libraries
versions have been bumped. So you need to rebuild all applications that
depend on libgcrypt. Do something like:
# portmaster -r libgcrypt
or
# portupgrade -rf libgcrypt
20110703:
AFFECTS: users of print/lyx and print/lyx-devel
AUTHOR: makc@FreeBSD.org
print/lyx has been updated to 2.0. print/lyx16 has been added to ports tree
for those who prefers to stick with the last stable in lyx-1.6.x series.
20110630:
AFFECTS: users of math/octave-forge* and benchmarks/octave-forge-benchmark
AUTHOR: stephen@FreeBSD.org
The octave-forge* port structure has been completely redesigned. This was
to make them compatible with portmaster and other port installation tools.
Before using the new octave-forge* ports, the old octave-forge* ports must
be completely removed with, for example, the command:
# pkg_delete "octave-forge*"
20110630:
AFFECTS: users of mail/thunderbird
AUTHOR: gecko@FreeBSD.org
The mail/thunderbird port has been updated to 5.0. If you want to stay with
Thunderbird 3.1 please run:
# portupgrade -o mail/thunderbird3 mail/thunderbird
# portupgrade -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
or
# portmaster -o mail/thunderbird3 mail/thunderbird
# portmaster -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
Do not select the OPTIMIZED_CFLAGS option on a system with less then
2 GB of RAM otherwise you will run out of memory during the build.
Please make sure all your addons are compatible with Thunderbird 5.0 and
backup your ~/.thunderbird directory prior to the first launch of Thunderbird
5.0.
20110630:
AFFECTS: users of x11/wbar
AUTHOR: nivit@FreeBSD.org
x11/wbar has been updated to 2.2.2. Before launching the program, please
backup your configuration file (~/.wbar), and then use the command wbar-config
to set your preferences and change the path of the old icons (in particular
the Bar image).
20110629:
AFFECTS: users of graphics/opencv
AUTHOR: mm@FreeBSD.org
OpenCV was updated to version 2.3.0rc and to avoid circular dependencies
split into two ports: graphics/opencv-core and graphics/opencv
Before updating please uninstall the graphics/opencv port first because
the new dependency graphics/opencv-core contains conflicting files with
the old port graphics/opencv.
20110626:
AFFECTS: users of mail/p5-Mail-SpamAssassin
AUTHOR: wxs@FreeBSD.org
mail/p5-Mail-SpamAssassin has been updated to version 3.3.2. Prior to
starting spamd you must run sa-update, or spamd will fail to start.
20110624:
AFFECTS: users of deskutils/opengoo
AUTHOR: acm@FreeBSD.org
desktutils/opengoo has been renamed to deskutils/fengoffice, because
The OpenGoo name was changed to Feng Office Community Edition.
If you want migrate from opengoo to fengoffice, please see upgrading
section at:
http://fengoffice.com/web/wiki/doku.php/installation
20110623:
AFFECTS: users of databases/py-sqlalchemy
AUTHOR: nivit@FreeBSD.org
The version 0.6 of SQLAlchemy has been moved to databases/py-sqlalchemy06,
while the port databases/py-sqlalchemy now holds the series 0.7.X.
To update the installed port run the command
# portmaster -o databases/py-sqlalchemy06 databases/py-sqlalchemy
or
# portupgrade -o databases/py-sqlalchemy06 databases/py-sqlalchemy
20110622:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.4. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20110620:
AFFECTS: users of net/samba35
AUTHOR: timur@FreeBSD.org
A bug, introduced by local patch to pam_winbind.so, that made it coredump
was spotted by Martin Minkus. It is fixed in the 3.5.9 version of the port.
So, if pam_winbind.so started to work for you - send him kudos.
20110619:
AFFECTS: users of irc/ezbounce and irc/ezbounce-devel
AUTHOR: flo@FreeBSD.org
irc/ezbounce-devel was moved to irc/ezbounce as the version previously in
irc/ezbounce has been broken for some time and the distfile is not available
anymore.
If you are upgrading from a 1.0X version make sure to verify that your config
still works. There is basic compatibility for old config files but a lot has
changed, see http://linuxftw.com/ezbounce/files/CHANGES
If you run irc/ezbounce-devel you need to run one of the following commands:
# portmaster -o irc/ezbounce irc/ezbounce-devel
or
# portupgrade -o irc/ezbounce irc/ezbounce-devel
20110619:
AFFECTS: users of lang/perl5.14
AUTHOR: skv@FreeBSD.org
lang/perl5.14 has been updated to 5.14.1. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.14.
Please see its manual page for details.
If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
follow instructions in the entry 20110517 in this file.
20110618:
AFFECTS: users of mail/mailscanner
AUTHOR: crees@FreeBSD.org
mail/mailscanner no longer requires running of any renew-* targets to
update the config files / wrapper scripts; it is now automatically
performed as the port is installed -- these targets have been removed.
As an added bonus, the binary package now performs these steps as well,
in case you don't have a portstree handy.
Before upgrading, please backup your PREFIX/etc/MailScanner,
PREFIX/share/MailScanner and PREFIX/libexec/MailScanner if you
have customised any of these directories, just in case.
20110608:
AFFECTS: users of security/amavisd-milter
AUTHOR: delphij@FreeBSD.org
A change have been made to rc.d script for amavisd-milter makes it to
specify -s explicitly. If you used to override the location of listening
socket by specifying -s, please migrate to the new way (specify
amavisd_milter_socket in /etc/rc.conf).
20110607:
AFFECTS: users of devel/p5-Moose and devel/p5-Class-MOP
AUTHOR: az@FreeBSD.org
p5-Moose has been updated to 2.0007. Now p5-Class-MOP is a part of the
p5-Moose distribution. Manual intervention of the update procedure is
required:
# portmaster -o devel/p5-Moose devel/p5-Class-MOP
# portmaster -R -r p5-Moose-\*
or do the same things with portupgrade.
To check everything went fine you can run:
# perl -Moose\ 999
and
# perl -MClass::MOP\ 999
in both cases you should see output:
version 999 required--this is only version 2.0007
20110606:
AFFECTS: users of mail/sympa
AUTHOR: crees@FreeBSD.org
Sympa previously used to install to ${PREFIX}/sympa, which goes against
the general rules for hierarchy. Most files which were previously found
in ${PREFIX}/sympa should now be found in ${PREFIX}/libexec/sympa.
Any configuration in httpd.conf files etc will need to be updated to the
new directory.
Before upgrade, it is advisable to back up configuration files
${PREFIX}/etc/sympa.conf and wwsympa.conf since previous versions wipe these
out on deinstall.
20110606:
AFFECTS: users of databases/mariadb
AUTHOR: dougb@FreeBSD.org
The mariadb port has been split into -client, -scripts, and -server ports
ala mysql. You can now install only the parts that you need.
If you have devel/libevent installed along with mariadb you should do
something like:
pkg_delete mariadb\*
portmaster devel/libevent
20110605:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.12.6.1 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
portmaster -r gnutls
20110605:
AFFECTS: users of sysutils/zfsnap
AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>
There is an issue with zpool v28 (currently only on 9-CURRENT, or
8-STABLE systems that have been manually patched) that affects
zfSnap. If you are using v28 make sure to use the -zpool28fix flag
with zfsnap to work around the problem.
For more information please see:
http://wiki.bsdroot.lv/zfsnap#zpool_v28_zfs_destroy_-r_bug
20110602:
AFFECTS: users of net/freeradius
AUTHOR: Sevan Janiyan <venture37@geeklan.co.uk>
Freeradius no longer runs as nobody. It now runs as the freeradius
user. Please ensure that the following paths are owned by freeradius:
/var/run/radiusd
/var/log/radacct
/var/log/radius.log
20110529:
AFFECTS: users of textproc/*kmfl*
AUTHOR: nikola.lecic@anthesphoria.net
KMFL keyboard ports are now shared between IBus and SCIM KMFL IMEngines
(textproc/ibus-kmfl and textproc/scim-kmfl-imengine). Thus, the prefix
'scim-' is dropped from keyboard ports names.
Similar to m17n, both engines now search engine-neutral locations,
${LOCALBASE}/share/kmfl/ and ~/.kmfl/. Users have to move their local
keyboard files from ~/.scim/kmfl/ to ~/.kmfl/.
20110523:
AFFECTS: users of www/mod_perl2
AUTHOR: ohauer@FreeBSD.org
mod_perl2 was updated to version 2.0.5, this version includes
p5-Apache-Reload again. The ports p5-Apache-Reload is now marked as
conflict for mod_perl2.
To update your mod_perl2 with portmaster use the commands
# portmaster -o www/mod_perl2 www/p5-Apache-Reload
# portmaster -R -r mod_perl2
20110522:
AFFECTS: users of emulators/virtualbox-ose
AUTHOR: vbox@FreeBSD.org
The emulators/virtualbox-ose port has been updated to 4.0.8. If you
want to stay with VirtualBox 3.2.x please run:
# portmaster -o emulators/virtualbox-ose-kmod-legacy emulators/virtualbox-ose-kmod
# portmaster -o emulators/virtualbox-ose-legacy emulators/virtualbox-ose
or
# portupgrade -o emulators/virtualbox-ose-kmod-legacy emulators/virtualbox-ose-kmod
# portupgrade -o emulators/virtualbox-ose-legacy emulators/virtualbox-ose
The emulators/virtualbox-ose-legacy port will always include the
latest legacy version as a fallback if you hit a serious regression
in the latest version.
20110517:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.14 is out. If you want to switch to it from, for example
lang/perl5.12, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.14):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.14 -f perl-5.12.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.14 lang/perl5.12
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20110516:
AFFECTS: users of net/skype, net/skype-devel, net-im/skype, net-im/skype-devel
AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org>
All skype ports were moved to net-im/:
- skype12: unchanged, very old version (for FreeBSD 6)
- skype20: last version with OSS support, that used to live in net/skype; the
DISTFILE is gone from the vendor but if you happen to have it, it would be a
way of having sound w/o needing to upgrade your base OS
- [RECOMMENDED] skype: currently at 2.1.0.81 and the best supported
- skype-devel: currently at 2.2.0.25, sounds is OK, video doesn't work
To run either skype or skype-devel with fully working sound you need:
- to run fc10 (most probably, please report what you can do with fc4):
(OVERRIDE_LINUX_BASE_PORT=f10,OVERRIDE_LINUX_NONBASE_PORTS=f10
in /etc/make.conf for systems that doesn't have it as default)
- In order for Skype to work OK, you need your kernel and modules to be:
- post 2011-05-03 in on HEAD
- post 2011-05-08 in on 7,8-STABLE
The port tries to catch if your system version is too old, but there's a
~3months window where because of a lack of OSVERSION bump, this is not
possible. So please check; and PLEASE READ THE PKGMESSAGE for setup details.
For how to update your kernel/world, see:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
IF YOUR OSVERSION IS NOT NEW ENOUGH, SOUND (ESPECIALLY MIC) WON'T WORK.
If you run into problems, at very least we need to know the output of:
$ uname -a; sysctl compat.linux | head -2; \
grep OVERRIDE_LINUX_ /etc/make.conf; \
cat /compat/linux/etc/alsa/pcm/pcm-oss.conf
the skype version you are using and hardware details (eg. webcam, if related)
I most probably will ignore any mail not containing this info since without
it it's impossible to help.
Please test your sound /video setup outside skype before blaming skype /
mailing me.
20110516:
AFFECTS: users of audio/musicpd
AUTHOR: Chris Rees <utisoft@gmail.com>
Musicpd now installs the binary for the server as bin/musicpd, rather than
mpd, to remove a conflict with net/mpich2; before upgrade you should run:
# /usr/local/etc/rc.d/musicpd stop
Likewise, mpd.conf has been renamed musicpd.conf-- if you want to keep it
as mpd.conf then place MPDCONF="mpd.conf" into /etc/make.conf, otherwise
after upgrade run:
# mv /usr/local/etc/mpd.conf /usr/local/etc/musicpd.conf
20110514:
AFFECTS: users of sysutils/gksu, sysutils/libgksu, sysutils/libgksuui
AUTHOR: bsam@FreeBSD.org
sysutils/gksu has been updated to 2.0.2. sysutils/libgksuui has been
deprecated since it has become a part of sysutils/libgksu.
Before upgrading remove sysutils/libgksuui.
20110511:
AFFECTS: users of editors/emacs
AUTHOR: ashish@FreeBSD.org
Due to a bug when upgrading from 23.2 or later versions, everything
installed by other ports in "${PREFIX}/share/emacs" gets removed.
Before upgrading:
* Please backup custom configurations in "${PREFIX}/share/emacs".
* After upgrading reinstall any ports that may have had files in the
"${PREFIX}/share/emacs" directory.
20110509:
AFFECTS: users of lang/ghc and */hs-*
AUTHOR: ashish@FreeBSD.org
GHC has been updated to version 7.0.3 and other Haskell ports are also
updated to their Haskell Platform versions or latest versions.
To update all affected ports:
# portmaster -r lang/ghc
or
# portupgrade -r lang/ghc
20110506:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
Default version of Perl was bumped to 5.12.
If you already have lang/perl5.10 or lang/perl5.8 installed, and want to
switch to lang/perl5.12 please follow instructions in the entry 20100715
in this file.
20110503:
AFFECTS: users of www/codeigniter and www/codeigniter-devel
AUTHOR: glarkin@FreeBSD.org
www/codeigniter has been renamed to www/codeigniter17 to track the
legacy 1.7.* branch of Codeigniter development. www/codeigniter-devel
has been renamed to www/codeigniter to track the recommended 2.0.*
branch of Codeigniter development.
If you have Codeigniter 1.7.x installed and would like to continue using
it, please run one of the following commands to update its origin:
# portmaster -o www/codeigniter17 www/codeigniter
or
# portupgrade -o www/codeigniter17 www/codeigniter
If you have Codeigniter 2.0.x installed, please run one of the following
commands to update its origin:
# portmaster -o www/codeigniter www/codeigniter-devel
or
# portupgrade -o www/codeigniter www/codeigniter-devel
20110427:
AFFECTS: users of mail/ezmlm-idx
AUTHOR: glarkin@FreeBSD.org
1) Please consult the instructions for upgrading to version 7.1.1 from
the earlier 0.444 version in the ports tree:
Online: https://github.com/bruceg/ezmlm-idx/blob/master/UPGRADE
Local: /usr/local/share/doc/ezmlm-idx/UPGRADE
2) SQLite3 has been added as a supported database plugin. Note that the
MySQL, PgSQL and SQLite options are mutually exclusive, and the first
selected option takes precedence if multiple options are selected.
20110421:
AFFECTS: users of multimedia/webcamd
AUTHOR: kwm@FreeBSD.org
Webcamd now creates device nodes with 0660 permission and webcamd:webcamd
ownership. To get access to the webcamd devices just add yourself to the
webcamd group.
20110409:
AFFECTS: users of japanese/asterisk-sounds
AUTHOR: tota@FreeBSD.org
The japanese/asterisk-sounds has been updated to 1.8.
If you want to stay with ja-asterisk14-sounds, please run:
# portmaster -o japanese/asterisk14-sounds japanese/asterisk-sounds
or
# portupgrade -o japanese/asterisk14-sounds japanese/asterisk-sounds
See also 20101128 net/asterisk entry.
20110406:
AFFECTS: users of lang/ocaml and related libraries/applications
AUTHOR: stas@FreeBSD.org
Ocaml compiler and libraries suite has been updated to 3.12.
There appears to be an ABI incompatibility with .cmi files
generated by previous compiler versions. Though these should
only affect the linking process, if some application you're
using start to misbehave after the lang/ocaml updated you're
advised to rebuild this applications using the new ocaml version.
20110402:
AFFECTS: users of net-mgmt/xymon-client and net-mgmt/xymon-server
AUTHOR: dinoex@FreeBSD.org
Loginname, path, scripts and config files have been renamed in 4.3.0
Steps to update:
1. Stop and deinstall the old version.
2. Copy the remaining config files to the new location.
3. Read the instructions
4. merge your old config with the upgrade430.sh script
5. fix the hobbit_*_enable lines in /etc/rc.conf
# /usr/local/etc/rc.d/hobbit-server stop
# /usr/local/etc/rc.d/hobbit-client stop
# pkg_delete /var/db/pkg/xymon-*
# pkg_add xymon-client-4.3.0.tbz
# pkg_add xymon-server-4.3.0.tbz
# cp /usr/local/www/hobbit/server/etc/* /usr/local/www/xymon/server/etc/
# less /usr/local/www/xymon/server/www/help/upgrade-to-430.txt
# /usr/local/www/xymon/server/bin/bbcmd /usr/local/www/xymon/server/bin/upgrade430.sh
# sed -i '' -e 's|hobbit|xymon' /etc/rc.conf
# /usr/local/etc/rc.d/xymon-client start
# /usr/local/etc/rc.d/xymon-server start
20110328:
AFFECTS: users of net/openldap24-client
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.25. In this version, certain library
routines were moved from liblutil to libldap. If you previously built
the library with "FETCH" support, this would cause libldap to depend on
FreeBSD's libfetch.so library.
As of 20110402, a local change have been introduced so OpenLDAP libraries
link against libfetch.so when FETCH is enabled. Normally, no further user
interaction would be required.
For new installations, the FETCH option have been turned off by default.
20110324:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated to 4.6.1. As usual a number of files were
moved between packages, manual intervention into update procedure is
required:
# pkg_delete -f kdehier4\* kdebase-runtime-4\* kdebase-workspace-4\*
# pkg_delete -f kdeedu-4\* kdeutils-4\*
# portmaster -a
20110322:
AFFECTS: users of www/firefox
AUTHOR: gecko@FreeBSD.org
The www/firefox port has been updated to 4.0. If you want to stay with
Firefox 3.6 please run:
# portupgrade -o www/firefox36 www/firefox
# portupgrade -o www/firefox36-i18n www/firefox-i18n (if installed)
or
# portmaster -o www/firefox36 www/firefox
# portmaster -o www/firefox36-i18n www/firefox-i18n (if installed)
Do not select the OPTIMIZED_CFLAGS option on a system with less then
2 GB of RAM otherwise you will run out of memory during the build.
Please make sure all your addons are compatible with Firefox 4.0 and
backup your ~/.mozilla directory prior to the first launch of Firefox
4.0.
The startup script has been renamed from firefox3 to firefox.
20110319:
AFFECTS: users of databases/mysql55-client
AUTHOR: ale@FreeBSD.org
The shared library version of the client library was increased to reflect
ABI changes, and avoid compatibility problems with the client library
in MySQL 5.1, so client programs that use the 5.5 client library should
be recompiled against the 5.5.10 client library.
This can be achieved with:
# portmaster -r mysql-client-5.5
or
# portupgrade -fr mysql-client-5.5
20110318:
AFFECTS: users of www/node and www/node-devel
AUTHOR: araujo@FreeBSD.org
The port www/node was merged with www/node-devel since there is no longer a
development version. Also www/node has not followed the stable upstream
prior to this update.
To keep www/node updated in your applications, from now on you must use
www/node instead of www/node-devel. If you have been using the www/node-devel,
you must run one of the following commands to upgrade:
# portmaster -o www/node www/node-devel
or
# portupgrade -o www/node www/node-devel
20110317:
AFFECTS: users of www/uzbl
AUTHOR: Klaus Aehlig <aehlig@linta.de>
The port has been updated to version as of 2011/02/15. This introduces
the following incompatabilities.
- $UZBL_FIFO, $UZBL_TITLE are available to scripts as environment variables,
but not as command-line arguments.
- environment variables are no longer expanded by the config parser
- download handling has changed
- cookie daemons are no longer supported
Users are advised to change their personal configuration files/scripts accordingly.
20110316:
AFFECTS: users of sysutils/duplicity
AUTHOR: peter.schuller@infidyne.com
sysutils/duplicity has been upgraded to 0.6.11. The old version
(0.5.20) is retained as sysutils/duplicity05. Duplicity 0.6 should
be generally compatible, but pay special attention to the new meaning
of the --archive-dir command. In particular, the archive dir is now
mandatory and defaults to ~/.cache/duplicity. You may have to
--exclude accordingly. In addition, it is recommended you consult
the CHANGELOG, specifically the "New in v0.6.00 (2009/06/08)" section
which details the checkpoint/restore feature (enabled by default) and
its implications.
20110313:
AFFECTS: users of astro/boinc-setiathome-enhanced
AUTHOR: rene@FreeBSD.org
The setiathome client has been updated to version 6.12. Before you
update, finish and report your current workunits to avoid losing them.
20110304:
AFFECTS: users of lang/python* and py-*
AUTHOR: miwi@FreeBSD.org
The default version of Python has been changed from 2.6.x to 2.7.x.
If you have 2.6.x installed, perform an upgrade of lang/python26 to
lang/python27 with one of the following commands:
If using portupgrade:
# portupgrade -o lang/python27 lang/python26
If using portmaster:
# portmaster -o lang/python27 lang/python26
If you want to retain 2.6.x as default Python version, set the
PYTHON_DEFAULT_VERSION variable to 'python2.6' (without quotes) in
/etc/make.conf, then go to lang/python and perform the following
command:
# portupgrade -R python
Once the installed Python has been updated to 2.7, by using the
method above, it is required to run the upgrade-site-packages target in
lang/python to assure that site-packages are made available to the new
Python version.
If using portupgrade:
# cd /usr/ports/lang/python && make upgrade-site-packages
If using portmaster:
# cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
The portmaster case can take quite some time to complete due to the lack of
cached information that the portupgrade suite uses (specifically pkg_which).
This is not the fault of portmaster.
20110301:
AFFECTS: users of databases/jasperserver
AUTHOR: jhelfman@experts-exchange.com
(taken from release notes of 4.0 from vendor)
If you are upgrading from an older JasperServer version such as 3.5 then
you must first upgrade to JasperServer 3.7 before upgrading to 4.0.
Upgrading directly from JasperServer 3.5 to 4.0 is not a "certified"
(i.e. fully QA tested) procedure.
The steps to carry out this operation are fully documented in the
JasperReports Server Installation Guide for the 3.7 release. You will
need to download the JasperServer 3.7 release package to get the relevant
files and documentation. To download the JasperServer 3.7 WAR file
distribution zip package, go to the JasperForge.org website and to the
JasperServer project.
http://jasperforge.org/projects/jasperserver
20110228:
AFFECTS: users of devel/ccache
AUTHOR: Emanuel Haupt <ehaupt@FreeBSD.org>
ccache now allows the use of non-default compilers such as clang. This
requires adjustments of the ccache make glue.
Please (re)read the following document after updating ccache to
ccache-3.1.4_1:
/usr/local/share/doc/ccache/ccache-howto-freebsd.txt
20110227:
AFFECTS: users of net/unison and net/unison-devel
AUTHOR: mandree@FreeBSD.org
Unison has been upgraded to version 2.40, which uses a different wire
protocol than 2.32 did. In order to support synchronization with
other computers where Unison is still at version 2.32, a new port
net/unison232 has been created. It provides unison232 and if that is
GTK2-enabled, also unison232-text. This unison232 port can be
installed in parallel with the existing net/unison port.
20110224:
AFFECTS: users of x11-drivers/xf86-video-ati
AUTHOR: miwi@FreeBSD.org
Xorg has been updated to 7.5.1. For all ATI users the driver
was updated to 6.14.0 but the old one is still available in
x11-drivers/xf86-video-ati613. See radeon(5) for options
available.
20110224:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.24, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
or
# portmaster -r net/openldap24-client
20110224:
AFFECTS: Nobody
AUTHOR: wxs@FreeBSD.org
FreeBSD 8.2 and 7.4 released.
20110209:
AFFECTS: users of www/testlink
AUTHOR: tota@FreeBSD.org
Testlink 1.9.1 was released. Before updating, you should read carefully
the included README file because this release requires a manual update
of the database scheme.
20110125:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.3. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20110124:
AFFECTS: users of mail/postfix
AUTHOR: sahil@FreeBSD.org
Postfix 2.8 introduces minor incompatibilities with previous versions.
Alias expansion, dns lookups, TLS support, milters and other features
are affected. To avoid surprises, carefully review the RELEASE_NOTES.
If you upgrade from Postfix 2.6 or earlier, you must execute "postfix
stop" and "postfix start" before you can use the postscreen(8) daemon.
This is needed because the Postfix 2.6 "pass" master service type did
not work reliably on some systems. If you upgrade from Postfix 2.7, or
from Postfix 2.8 before July 25, 2010, you must "postfix reload" (or
"postfix stop" followed by "postfix start"). This is needed because
the queue manager to delivery agent protocol has changed.
Also note that the optional SPF and VDA patches have not been updated
for Postfix 2.8; as a result, they are currently disabled.
20110111:
AFFECTS: users of www/redmine
AUTHOR: decke@FreeBSD.org
If you use 3rd party plugins that are incompatible with i18n >= 0.5.0
(eg. variables in yml files as {{variable}}) then you need to
install an older i18n version manually.
# gem install -v=0.4.2 i18n
Then upgrade the database as usual:
# rake db:migrate RAILS_ENV=production
20110107:
AFFECTS: users of mail/exim
AUTHOR: rea@FreeBSD.org
[POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user
is now the Exim run-time user, instead of root.
[POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer
optional and is forced on. This is mitigated by the new build
option TRUSTED_CONFIG_LIST which defines a list of configuration
files which are trusted; one per line. If a config file is owned
by root and matches a pathname in the list, then it may be invoked
by the Exim build-time user without Exim relinquishing root
privileges.
[POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
trusted to supply -D<Macro[=Value]> overrides on the command-line.
Going forward, we recommend using TRUSTED_CONFIG_LIST with shim
configs that include the main config. As a transition mechanism,
we are temporarily providing a work-around: the new build option
WHITELIST_D_MACROS provides a colon-separated list of macro names
which may be overriden by the Exim run-time user. The values of
these macros are constrained to the regex ^[A-Za-z0-9_/.-]*$
(which explicitly does allow for empty values).
Upgrading users are encouraged to fully study
ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.73
and
ftp://exim.inode.at/exim/ChangeLogs/ChangeLog-4.73
20110103:
AFFECTS: users of textproc/libwpd and graphics/libwpg
AUTHOR: fluffy@FreeBSD.org
LibWPD and LibWPG is now using new API, partially incompatible with
previous versions.
For correct upgrade procedure please upgrade LibWPD and LibWPG first
as described, than follow usual upgrade procedure
# portmaster -o textproc/libwpd08 libwpd
# portmaster -o graphics/libwpg01 libwpg
substitute 'portupgrade' for 'portmaster' accordingly if that's your
your upgrade tool of choice.
20101230:
AFFECTS: users of databases/postgresql??-(server|client)
AUTHOR: ohauer@FreeBSD.org
PostgreSQL version 8.4 is now the default. To upgrade from a version
lower than 8.4, follow the instructions on the PostgreSQL.org website.
http://www.postgresql.org/docs/8.4/interactive/install-upgrading.html
20101230:
AFFECTS: users of net-mgmt/pnp
AUTHOR: rea@FreeBSD.org
Starting from 0.6.10_1 config.php is no longer preserved across
upgrades; PNP way is to put all modifications into config_local.php.
Existing config.php will be saved as config.php.orig and you should
review your deviations from defaults and place them into
config_local.php.
20101227:
AFFECTS: users of databases/mysql55-server
AUTHOR: ale@FreeBSD.org
MySQL 5.5 has been updated to 5.5.8 GA release. Since layout is
changed you should remove mysql55-{client/server/scripts} ports
before upgrading. The build system is changed too, so expect
failures.
20101227:
AFFECTS: users of security/opensc
AUTHOR: ale@FreeBSD.org
opensc has been updated to 0.12.0 release. Only one backend can be
choosen at compile-time: PC/SC is now the default one.
opensc doesn't export anymore its internal library, PKCS#11 is the
recommended interface.
20101220:
AFFECTS: users of net-mgmt/flowd
AUTHOR: ohauer@FreeBSD.org
flowd use now a fix UID/GID (id 542) instead the next free UID.
Before updating the port use the command "pw userdel _flowd"
20101216:
AFFECTS: users of security/libksba
AUTHOR: glarkin@FreeBSD.org
libksba has been updated to 1.1.0, and the shared library version has
increased from .17 to .18.
Directly- and indirectly-dependent ports have had their PORTREVISION
bumped to facilitate rebuilding. Please rebuild the dependent ports
with your preferred upgrading tool:
# portupgrade -rf security/libksba
-or-
# portmaster -w -r security/libksba
If there are still ports on your system that require ksba.so.17 (either
in ${LOCALBASE}/lib/compat/pkg, or non-existent), _please_ file a PR so
that a correct direct dependency can be added.
Once you are satisfied that no ports still depend on the old shared
library version (libksba.so.17), you can safely delete it from the
${LOCALBASE}/lib/compat/pkg directory if it is present there.
20101216:
AFFECTS: users of databases/akonadi
AUTHOR: avilla@FreeBSD.org
With SQLite 3 installed, Akonadi used to build its plugin and
install it in a wrong place, without it being listed in plist. To
remove the orphaned file, run the following commands PRIOR TO the
Akonadi upgrade:
# cd /usr/ports/databases/akonadi
# rm `make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL`/sqldrivers/libqsqlite3.so
# rmdir `make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL`/sqldrivers \
`make -V KDE4_PREFIX`/`make -V QT_PLUGINDIR_REL` \
`make -V KDE4_PREFIX`/`make -V QT_LIBDIR_REL`
20101214:
AFFECTS: users of devel/icu
AUTHOR: bapt@FreeBSD.org
icu has been updated to version 4.6. Please rebuild all ports that depends
on it.
If you use portmaster:
# portmaster -r icu
If you use portupgrade:
# portupgrade -fr devel/icu
Note that devel/icu4 is now deprecated consider replacing it by devel/icu
# portmaster -o devel/icu devel/icu4
or
# env DISABLE_CONFLICTS=1 portupgrade -o devel/icu -f icu-4\*
20101211:
AFFECTS: users of devel/bugzilla, japanese/bugzilla and russian/bugzilla-ru
AUTHOR: tota@FreeBSD.org
Bugzilla and its language packs are installed to
WWWDIR (defaults to PREFIX/www/bugzilla).
BUGZILLADIR (that defaulted to PREFIX/www/data/bugzilla) is deprecated.
20101211:
AFFECTS: users of databases/mysql-proxy
AUTHOR: Florian Smeets <flo@smeets.im>
The parameters --admin-username and --admin-password are mandatory now.
Add something like the following to rc.conf
mysql_proxy_args="--admin-username admin --admin-password somepassword"
20101210:
AFFECTS: users of multimedia/avidemux2
AUTHOR: nox@FreeBSD.org
The port has been updated to 2.5.4 which now installs plugins separately
and I had to make a slave port for them, multimedia/avidemux2-plugins.
So you'll now have to install that port too for the app to become useful.
20101208:
AFFECTS: autotools
AUTHOR: autotools@FreeBSD.org
Another stage in the autotools cleanup that reduces tree churn whilst
updating components, a number of ports have now moved to non-versioned
locations since there is now only the concept of legacy and current
versions.
# portmaster -o devel/autoconf devel/autoconf268
# portmaster -o devel/automake devel/automake111
# portmaster -o devel/libtool devel/libtool22
# portmaster -o devel/libltdl devel/libltdl22
substitute 'portupgrade' for 'portmaster' accordingly if that's your
your upgrade tool of choice.
20101205:
AFFECTS: users of www/py-flexget
AUTHOR: lioux@FreeBSD.org
Database schema changes. Please run:
$ sqlite3 db-config.sqlite "ALTER TABLE thetvdb_favorites ADD series_id VARCHAR;"
$ sqlite3 db-config.sqlite "ALTER TABLE imdb_movies ADD updated DateTime;"
$ sqlite3 db-config.sqlite "ALTER TABLE imdb_movies ADD mpaa_rating VARCHAR;"
inside flexget configuration directory (~/.flexget) for each
sqlite database you might have.
Replace "db-config.sqlite" with the appropriate name for your
sqlite database file.
20101204:
AFFECTS: users of audio/libmpcdec
AUTHOR: lioux@FreeBSD.org
audio/libmpcdec has been removed in favor of audio/musepack; which
has a higher shared library version. You will have to rebuild all
ports that depend on audio/libmpcdec. Do this:
Portmaster users:
# portmaster -o audio/musepack audio/libmpcdec
# portmaster -r musepack-
Portupgrade user:
# env DISABLE_CONFLICTS=1 portupgrade -o audio/musepack -f libmpcdec-\*
# pkgdb -Ff
# portupgrade -rf musepack-\*
20101204:
AFFECTS: autotools
AUTHOR: autotools@FreeBSD.org
The next stage in the ongoing cleanup of autotools-using ports is
a refactoring of bsd.autotools.mk so that version numbers are no longer
needed within the USE_AUTOTOOLS stanza. There is either
autoconf213/autoconf or automake14/automake (for the legacy versions,
and the currently available versions). This will considerably reduce
the amount of tree-wide patching in future on an update.
IMPORTANT: if you have either devel/autoconf-wrapper or
devel/automake-wrapper installed on your system (and you most likely do)
PLEASE update these ports to their new versions before updating anything
else -- Bad Things[tm] are likely to happen otherwise.
20101202:
AFFECTS: users of multimedia/gstreamer-plugins
AUTHOR: multimedia@FreeBSD.org
If during the upgrade of gstreamer-plugins the following error happens:
GstAudio-0.10.gir: Incompatible version 1.0 (supported: 1.2)
Use the following command to upgrade:
cd ports/multimedia/gstreamer-plugins && make deinstall clean install
20101202:
AFFECTS: users of www/wordpress
AUTHOR: sunpoet@FreeBSD.org
WordPress is now installed to WWWDIR (defaults to PREFIX/wordpress)
instead of WORDPRESS (defaults to PREFIX/www/data/wordpress).
20101129:
AFFECTS: users of sysutils/radmind
AUTHOR: ohauer@FreeBSD.org
The radmind user and group is created automatically during installation.
The owner of $RADMIND_BASE_DIR changes from root to radmind.
20101128:
AFFECTS: users of net/asterisk, net/asterisk-addons
AUTHOR: Florian Smeets <flo@smeets.im>
If you want to upgrade to 1.8.0 first remove asterisk-addons by running
# pkg_delete -f asterisk-addons\*
after that you can run one of the following
# portmaster asterisk
or
# portupgrade asterisk
You need to update your config files as the step from 1.4.x to 1.8.x is
quite big. First you need to look at what changed between 1.4 and 1.6
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE-1.6.txt
After that you also need to take into account what chagne between
1.6 and 1.8
http://svnview.digium.com/svn/asterisk/branches/1.8/UPGRADE.txt
If you want to stay with asterisk 1.4.x please run
# portmaster -o net/asterisk14 net/asterisk
# portmaster -o net/asterisk14-addons net/asterisk-addons
or
# portupgrade -o net/asterisk14 net/asterisk
# portupgrade -o net/asterisk14-addons net/asterisk-addons
20101127:
AFFECTS: users of mail/postfix, mail/postfix2[56]
AUTHOR: sahil@FreeBSD.org
As of Postfix 2.7.2, 2.6.8, 2.5.11:
Postfix no longer automatically appends the system default CA
(certificate authority) certificates, when it reads the CA
certificates specified with {smtp, lmtp, smtpd}_tls_CAfile or
with {smtp, lmtp, smtpd}_tls_CApath. This prevents third-party
certificates from getting mail relay permission with the
permit_tls_all_clientcerts feature. Unfortunately, this change
may cause compatibility problems with configurations that rely
on certificate verification for other purposes. To get the old
behavior, specify "tls_append_default_CA = yes".
20101124:
AFFECTS: users of www/py-flexget
AUTHOR: lioux@FreeBSD.org
metainfo_series is no longer a builtin. This should only affect
you if you aren't using one of the series plugins (series,
all_series, thetvdb_favorites, or series_premiere.) If you need
to enable metainfo_series manually for a feed it can be done like
so:
metainfo_series: yes
20101120:
AFFECTS: users of x11-toolkits/gtk20 and x11-toolkits/gtkmm24
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
In the GNOME 2.32 release. gdk-pixbuf2 has been split off from gtk20,
and atkmm has been split off from gtkmm24. To upgrade please use the
following instructions:
Portmaster users:
# pkg_delete -f gtkmm-2.20\* gtk-2.20\*
# portmaster -a
Portupgrade users:
# pkgdb -fF
# pkg_deinstall -fO gtkmm-2.20\* gtk-2.20\*
# portupgrade -aOW
20101118:
AFFECTS: users of editors/emacs-devel
AUTHOR: Ashish SHUKLA <ashish@FreeBSD.org>
Due to a bug when upgrading from 24.0.50.101606, everything
installed by other ports in "${PREFIX}/share/emacs" gets removed.
Before upgrading:
* Please backup custom configurations in "${PREFIX}/share/emacs".
* After upgrading reinstall any ports that may have had files in the
"${PREFIX}/share/emacs" directory.
Apologies for this inconvenience.
20101117:
AFFECTS: users of net-p2p/transmission-cli and net-p2p/transmission-gtk
AUTHOR: Mezz <mezz@FreeBSD.org>
Transmission has been updated to 2.12. The following name of binaries and
manpages have been renamed:
transmissioncli -> transmission-cli
transmission -> transmission-gtk
20101117:
AFFECTS: users of devel/ccache
AUTHOR: Emanuel Haupt <ehaupt@FreeBSD.org>
Updated instructions on how to workaround a buildworld failure have been
committed. Please (re)read the following document after updating ccache to
3.1.1_1:
/usr/local/share/doc/ccache/ccache-howto-freebsd.txt
20101110:
AFFECTS: users of databases/mysql55-server
AUTHOR: Alex Dupre <ale@FreeBSD.org>
If you are upgrading from a previous MySQL release, the server will exit
during startup after finding that the proxies_priv table is missing.
To create the table, start the server with the --skip-grant-tables
option to cause it to skip the normal grant table checks, then run
mysql_upgrade. Then stop the server and restart it normally.
You can do this by temporarly setting the following line in rc.conf:
mysql_args="--skip-grant-tables --skip-networking"
20101108:
AFFECTS: users of databases/py-bsddb3
AUTHOR: wen@FreeBSD.org
py-bsddb3 update to 5.1.0. This release drops support for Berkeley
DB 4.1, and adds support for Berkeley DB version 5.1, brand new. If
you need Berkeley DB 4.1 support, keep using pybsddb 5.0.0. If you
want support for Berkeley DB 5.1, remember to install the BDB library
before installing these bindings.
20101030:
AFFECTS: users of www/xshttpd-devel
AUTHOR: johans@FreeBSD.org
The default XS-httpd configuration file locations have changed:
The main configuration file is now $PREFIX/etc/xshttpd/httpd.conf
and other configuration file are stored in that same directory.
Existing configurations should be moved over manually.
Log files now appear in /var/log/xshttpd/ by default.
20101029:
AFFECTS: users of ports-mgmt/portmaster
AUTHOR: Doug Barton <dougb@FreeBSD.org>
The changes to bsd.port.mk in 1.652 require all portmaster users to
upgrade to version 3.1 or later. The best method to do this will be
to use the port, rather than portmaster itself:
# pkg_delete -f portmaster\*
# cd /usr/ports/ports-mgmt/portmaster && make clean && make install clean
20101026:
AFFECTS: users of net/samba35
AUTHOR: Timur Bakeyev <timur@FreeBSD.org>
This is the latest stable release of the Samba3 distribution. It has
been extended with the experimental support of the NFS4-like ACLs on
ZFS partitions, thanks to the sysutils/libsunacl library by Edward
Tomasz Napierala(trasz). This support haven't been tested thoroughly,
so try it on your own risk.
This port reverted back to the pre- net/samba34 layout of the
directories and now they are again $PREFIX/etc/samba, /var/run/samba,
/var/log/samba, /var/db/samba and /var/spool/samba respectively.
In case, you are upgrading from net/samba34, please rename
corresponding samba34/ subdirectories into samba/ ones. Upgrades from
older versions of Samba and fresh installations should be seamless.
20101015:
AFFECTS: users of devel/llvm-devel who use clang
AUTHOR: Brooks Davis <brooks@FreeBSD.org>
The clang portion of devel/llvm-devel has been split out and now
resides in lang/clang-devel. If you have devel/llvm-devel installed
in order to use clang, you will need to install the clang-devel port
when upgrading.
20101003:
AFFECTS: users of www/typo3
AUTHOR: Helmut Schneider <jumper99@gmx.de>
www/typo3 has been repocopied to www/typo343. If you need to continue with
the old stable version please run
# portmaster -o www/typo343 www/typo3
or
# portupgrade -o www/typo343 www/typo3
Please remember to change the path of your config files too.
20101003:
AFFECTS: users of net-mgmt/kismet
AUTHOR: bf@FreeBSD.org
This update includes major changes in how Kismet works and is configured.
Clients, servers, drones, and configuration files must be updated to work
with the new version. Map support has not yet been added.
See the kismet README for details.
20100929:
AFFECTS: users of sysutils/zfsnap
AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>
Since timestamp format changed you need to use -o option with -d
option in order to be able to delete old snapshots. Note however that
you don't need -o when creating new snapshots, unless you want to keep
using the old timestamp format.
See http://wiki.bsdroot.lv/zfsnap for more info.
20100927:
AFFECTS: users of mail/postfix-current
AUTHOR: ohauer@FreeBSD.org
Incompatibility with snapshot 20100912
======================================
- If your DNSBL queries have a "secret" in the domain name, you must
now censor this information from the postscreen(8) SMTP replies.
- The postscreen "continue" action is now called "ignore". The old
name is still supported but no longer documented.
- The postscreen_hangup_action parameter was removed. Postscreen
now always behaves as if "postscreen_hangup_action = drop".
- The postscreen_cache_retention_time default was increased from
1d to 7d, to avoid deleting results from expensive deep SMTP
protocol tests too quickly.
Incompatibility with snapshot 20100827
======================================
- The Postfix SMTP client no longer appends the local domain when
looking up a DNS name without ".".
Specify "smtp_dns_resolver_options = res_defnames" to get the old
behavior, which may produce unexpected results.
20100924:
AFFECTS: users of x11/nvidia-driver
AUTHOR: makc@FreeBSD.org
nvidia-driver does not install vdpau library and headers anymore, they
are now provided by multimedia/libvdpau port. To avoid conflict, please
rebuild nvidia-driver port before upgrading your ports and before
installing multimedia/libvdpau.
20100921:
AFFECTS: users of p5-Compress-Zlib, p5-IO-Compress-*
AUTHOR: mm@FreeBSD.org
The p5-Compress-Zlib, p5-IO-Compress-Base, p5-IO-Compress-Zlib and
p5-IO-Compress-Bzip2 ports have been replaced by p5-IO-Compress.
Users of Perl 5.10 and higher do not need to install this module
because it is already included in the standard perl distribution.
20100920:
AFFECTS: users of security/stunnel
AUTHOR: roam@FreeBSD.org
In stunnel-4.34, the DH support is no longer configurable by the user,
but always enabled when OpenSSL supports it instead. This means that
it will now most probably be enabled on the supported versions of FreeBSD.
If this leads to problems with old SSL clients, I will look into making
it configurable at build time again.
20100917:
AFFECTS: users of sysutils/cdrtools-cjk
AUTHOR: marius@FreeBSD.org
sysutils/cdrtools-cjk port has been removed, as the required functionality is
now available in cdrtools 3.0.0 in the standard sysutils/cdrtools port.
20100915:
AFFECTS: autoconf, automake
AUTHOR: autotools@FreeBSD.org
autoconf has been updated from 2.62 to 2.67 -- all ports depending on
autoconf-2.62 have had their PORTREVISIONs update, so a standard
port updating method will suffice.
USE_GETTEXT has been extended to also accept 'build' and 'run' for
ports which need devel/gettext as a BUILD- or RUN-time dependency only.
No port should now be directly depending on devel/gettext in Makefiles.
20100915:
AFFECTS: users of sysutils/cdrtools-cjk
AUTHOR: marius@FreeBSD.org
Version 3.00 of sysutils/cdrtools breaks but at the same time also
obsoletes sysutils/cdrtools-cjk as mkisofs now employs iconv for
character conversion. Consequently sysutils/cdrtools-cjk is marked
BROKEN and the use of USE_CDRTOOLS=cjk as well as USE_CDRTOOLS together
with the WITH_CJK knob left in a broken state until bsd.port.mk is
updated by portmgr@ accordingly. Once USE_CDRTOOLS is updated to no
longer refer to sysutils/cdrtools-cjk the latter will be removed.
Previous users of sysutils/cdrtools-cjk should switch to using
sysutils/cdrtools instead, which might require not using the WITH_CJK
knob until said update of bsd.port.mk has happened.
20100915:
AFFECTS: users of lang/perl5.12
AUTHOR: skv@FreeBSD.org
lang/perl5.12 has been updated to 5.12.2. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.12.
Please see its manual page for details.
If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
follow instructions in the entry 20100715 in this file.
20100912:
AFFECTS: ftp/curl
AUTHOR: roam@FreeBSD.org
With version 7.21.1, the cURL port is built with stricter compiler
checking by default (the -Werror flag is passed to the C compiler,
making it treat any warnings as fatal errors). If you experience
problems building cURL, re-run "make config" in the ftp/curl
directory and disable the WERROR knob.
20100912:
AFFECTS: www/tdiary-devel, japanese/tdiary-devel
AUTHOR: tota@FreeBSD.org
The stable tDiary ports, www/tdiary and japanese/tdiary, have been
updated to 3.0.0. The development versions of tDiary have been merged
from www/tdiary-devel to www/tdiary and from japanese/tdiary-devel to
japanese/tdiary, respectively.
If you have been using the www/tdiary-devel or japanese/tdiary-devel,
you run one of the following commands to upgrade:
- www/tdiary-devel
# portmaster -o www/tdiary www/tdiary-devel
or
# portupgrade -o www/tdiary www/tdiary-devel
- japanese/tdiary-devel
# portmaster -o japanese/tdiary japanese/tdiary-devel
or
# portupgrade -o japanese/tdiary japanese/tdiary-devel
Before upgrading, please read the following for more details:
http://www.tdiary.org/20100828.html (written in Japanese)
20100907:
AFFECTS: sysutils/pecl-fileinfo
AUTHOR: ale@FreeBSD.org
If you are using php 5.3 (lang/php5) and fileinfo extension, you
should switch to sysutils/php5-fileinfo port:
portmaster -o sysutils/php5-fileinfo sysutils/pecl-fileinfo
20100904:
AFFECTS: net/netcat
AUTHOR: pgollucci@FreeBSD.org
Rename nc to netcat to prevent /usr/bin/nc shadowing /usr/local/bin/nc
20100902:
AFFECTS: users of KDE4
AUTHOR: kde@FreeBSD.org
KDE SC ports has been updated to 4.5.1. A number of files were moved
between packages, manual intervention into update procedure is required:
# pkg_delete -f kdehier4\* kdelibs-4\* kdebase-4\* kdebase-runtime-4\* kdebase-workspace-4\*
# rm -rf /usr/local/kde4/share/PolicyKit/policy
# cd /usr/ports/misc/kdehier4 && make install clean
# portmaster -a
20100901:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 3.0.0. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20100817:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The modules mod_geoip and mod_h264_streaming have been moved into slave
ports: www/lighttpd-mod_geoip and www/lighttpd-mod_h264_streaming
20100818:
AFFECTS: users of www/lighttpd
AUTHOR: mm@FreeBSD.org
The default lighttpd configuration file locations have changed.
The main configuration file is now: $PREFIX/etc/lighttpd/lighttpd.conf
and includes other configuration files from $PREFIX/etc/lighttpd/
For compatibility with old-style configurations, if the lighttpd_conf
variable is not set in /etc/rc.conf, $PREFIX/etc/lighttpd.conf takes
precedence over $PREFIX/etc/lighttpd/lighttpd.conf
20100815:
AFFECTS: users of databases/redis and databases/redis-devel
AUTHOR: osa@FreeBSD.org
The redis configuration file, redis.conf, have been changed, some options
removed in newer versions (>=2.0). In some cases, redis-server with
older configuration might does not run at startup.
If you run into startup problems, re-edit configuration file.
20100813:
AFFECTS: www/opera
AUTHOR: dinoex@FreeBSD.org
If you run opera without gtk or kde4, the browser might crash on shutdown.
In this case go to about:config and change "Dialog Toolkit" from 0 to 4.
20100811:
AFFECTS: multimedia/mpeg4ip-libmp4v2
AUTHOR: makc@FreeBSD.org
multimedia/mpeg4ip-libmp4v2, which is not maintained upstream, has been
replaced with new port, multimedia/mp4v2. The shared library version
has been changed with this update, thus all ports that depends on
mp4v2 library must be rebuilt:
portmaster -o multimedia/mp4v2 multimedia/mpeg4ip-libmp4v2
portmaster -a
20100731:
AFFECTS: users of devel/ccache
AUTHOR: ehaupt@FreeBSD.org
Users upgrading from 2.4 release should clear the old cache directory with:
# ccache --clear
20100730:
AFFECTS: users of www/neon28 and www/neon29
AUTHOR: mezz@FreeBSD.org
Makes neon29 our default neon library in the ports tree. The www/neon28
has been removed and www/neon29's shared library version has been changed.
You will have to rebuild all ports that depend on www/neon29. Do this:
Portmaster users:
portmaster -o www/neon29 www/neon28
portmaster -r neon29-
Portupgrade user:
env DISABLE_CONFLICTS=1 portupgrade -o www/neon29 -f neon28-\*
pkgdb -Ff
portupgrade -rf neon29-\*
20100728:
AFFECTS: users of textproc/nltk
AUTHOR: clsung@FreeBSD.org
Nltk has been upgraded to 2.0b8 which depends on devel/py-yaml now.
You need to deinstall nltk before upgrading, since the previous port
will delete files installed from py-yaml during its deinstall phase.
Use, for example:
# pkg_delete nltk-2.0b7,1
# portsnap fetch update
# cd /usr/ports/textproc/nltk/
# make install clean
20100727:
AFFECTS: users of security/libgcrypt
AUTHOR: wxs@FreeBSD.org
libgcrypt has been upgraded to 1.4.6 which has a shared library version
bump. You need to reinstall all ports that depend on it. Use something
like this:
portupgrade -rf libgcrypt
portmaster -r libgcrypt
20100722:
AFFECTS: users of net/rabbitmq
AUTHOR: Phillip <pneumann@gmail.com>
The database schema and the format in which persistent messages are
stored have both changed since the last release (1.7.2). When
starting, the RabbitMQ server will detect the existence of an old
database and will move it to a backup location, before creating a
fresh, empty database, and will log a warning.
20100715:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.12 is out. If you want to switch to it from, for example
lang/perl5.10, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.12):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.12 -f perl-5.10.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
portmaster -o lang/perl5.12 lang/perl5.10
Conservative:
portmaster p5-
Comprehensive (but perhaps overkill):
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20100626:
AFFECTS: users of japanese/ibus-mozc
AUTHOR: daichi@FreeBSD.org
The japanese/ibus-mozc port has been updated to version 0.11.383.102,
and separated into 5 ports to cope with upcoming new port
japanese/scim-mozc.
o japanese/mozc-server
o japanese/mozc-tool
o japanese/mozc-additions
o japanese/ibus-mozc
o devel/py-gyp-devel
You can not upgrade with portupgrade or portmaster. To upgrade, you
must deinstall japanese/ibus-mozc first and then install the new
japanese/ibus-mozc.
For example:
# pkg_delete ja-ibus-mozc-0.11.365.102_1
# portsnap fetch update
# cd /usr/ports/japanese/ibus-mozc/
# make install clean
20100617:
AFFECTS: users of security/{dirmngr|gnupg}
AUTHOR: dougb@FreeBSD.org
The security/libassuan port has been updated to version 2.0.0, and
the applications listed above have been updated to use it as of versions
1.1.0 and 2.0.15 respectively. If you HAVE NOT updated your libassuan
port as described in the 20100613 entry, you can simply update all 3
ports together (libassuan, dirmngr if installed, and gnupg) using your
normal upgrade path. If you HAVE updated to libassuan-1, then you need
to do the following before upgrading dirmngr and gnupg.
If you use portupgrade:
portupgrade -f -o security/libassuan security/libassuan-1
If you use portmaster:
portmaster -o security/libassuan libassuan-1
If you use neither:
pkg_delete -f libassuan*
Please note, libassuan version 2.0.0 is now a shared library, so unlike
the previous version it is now a runtime dependency and cannot be deleted
after you are done building dirmngr and/or gnupg.
20100613:
AFFECTS: users of deskutils/kdepim4, and security/{gpa|opensc}
AUTHOR: dougb@FreeBSD.org
The security/libassuan port has been updated to version 2.0.0, however,
the applications listed above are not yet compatible with it. Therefore
security/libassuan-1 has been created until they can be updated, and the
ports listed above have been updated to depend on it. You must first
replace your existing libassuan with version 1 in the new location, then
you can update the ports listed above normally.
If you use portupgrade:
portupgrade -f -o security/libassuan-1 security/libassuan
If you use portmaster:
portmaster -o security/libassuan-1 libassuan
If you use neither:
pkg_delete -f libassuan*
20100609:
AFFECTS: users of audio/libogg and audio/libao
AUTHOR: naddy@FreeBSD.org
There are new versions of libogg (1.2.0) and libao (1.0.0) and the
shared library versions have been bumped (ogg.6 to ogg.7, ao.3 to ao.4).
All ports that have an identifiable direct dependency on these libraries
have had their PORTREVISIONs bumped. However, some ports that pull in
the libraries indirectly may continue to look for the old versions. To
ensure that all are updated, perform this step:
If you use portupgrade:
portupgrade -rf libogg libao
If you use portmaster:
portmaster -r libogg libao
20100605:
AFFECTS: users of multimedia/gstreamer-plugins-good and
multimedia/gstreamer-plugins-bad
AUTHOR: kwm@FreeBSD.org
Certain plugins were moved from the -bad port to the -good port. Please
follow instructions below before proceeding with normal update steps:
If you use portmaster:
portmaster gstreamer-plugins-bad
If you use portupgrade:
portupgrade -R multimedia/gstreamer-plugins-bad
20100602:
AFFECTS: users of lang/mono
AUTHOR: romain@FreeBSD.org
Starting with Mono 2.6, the Moonlight compiler and assemblies are not
installed by the lang/mono port anymore. They are however provided by
the multimedia/moonlight port.
If you are doing some Silverlight development, install multimedia/moonlight
after updating lang/mono.
20100530:
AFFECTS: users of devel/gettext (i.e.: YOU)
AUTHOR: ade@FreeBSD.org
Another version of gettext (0.18), and another shared library version
bump (from intl.8 to intl.9), so:
All ports that have an identifiable known direct dependency on gettext
have had their PORTREVISIONs bumped. If after upgrading:
# portupgrade -rf gettext
# portmaster -w -r gettext
The upgrade of devel/gobject-introspection may fail because it is looking
for libintl.so.8. In this case, do the following:
# cd /usr/ports/devel/gobject-introspection
# make clean
# make deinstall
# make install clean
Then continue your upgrade procedure normally.
If there are still ports on your system that are looking for libintl.so.8
(either in ${LOCALBASE}/lib/compat/pkg, or non-existent), _please_ file
a PR so that a correct direct dependency can be added.
Once you are satisfied that no ports still depend on the old versions (such
as libgettextpo.so.4 and libintl.so.8) you can safely delete them from the
${LOCALBASE}/lib/compat/pkg directory if they are present there.
20100524:
AFFECTS: users of devel/darcs, ports-mgmt/porte, textproc/pandoc,
x11/xmobar, x11-wm/xmonad, x11-wm/xmonad-contrib
AUTHOR: pgj@FreeBSD.org
The following ports have been renamed to improve consistency among Haskell
Cabal ports:
- devel/darcs -> devel/hs-darcs
- ports-mgmt/porte -> ports-mgmt/hs-porte
- textproc/pandoc -> textproc/hs-pandoc
- x11/xmobar -> x11/hs-xmobar
- x11-wm/xmonad -> x11-wm/hs-xmonad
- x11-wm/xmonad-contrib -> x11-wm/hs-xmonad-contrib
Please follow these steps below to update Haskell ports that you have
installed:
1) Reinstall the renamed Haskell port dependencies (see previous entry).
Note that this will possibly require that you remove the affected leaf
(aforementioned) ports as well;
2) Reinstall the renamed application(s) you use.
20100524:
AFFECTS: users of hs-* ports
AUTHOR: pgj@FreeBSD.org
The following Haskell ports have been renamed in order to bring them in
sync with the naming scheme used at HackageDB. Please follow these steps
below to update your installation:
1) Delete the following ports (if you have any of them installed):
- hs-zip-archive-ghc
- hs-binary-ghc
- hs-language-c-ghc
- hs-lazysmallcheck-c-ghc
- hs-pcre-light-ghc
- hs-utf8-string-ghc
- hs-HGL-ghc
- hs-digest-ghc
- hs-haxml
- hs-highlighting-kate-ghc
- hs-polyparse-ghc
- hs-x11-ghc
- hs-x11-xft-ghc
- hs-opengl-ghc
- hs-OpenGLRaw-ghc
- hs-OpenGLURaw-ghc
- hs-glut-ghc
2) Rebuild the renamed ports and all ports that depend on them.
20100518:
AFFECTS: users of devel/pylint
AUTHOR: mva@FreeBSD.org
The pylint user configuration files have been changed slightly in newer
versions (>=0.20.0). In some cases, older configurations might crash
pylint at startup.
If you run into startup problems, make sure you remove the .pylintrc
configuration settings and the .pylint.d directory from your home
directory:
$ rm ~/.pylintrc
$ rm -rf ~/.pylint.d
20100518:
AFFECTS: users of devel/apr0, devel/apr1, www/apache20, www/apache22
AUTHOR: pgollucci@FreeBSD.org
devel/apr port has been renamed to devel/apr1.
WITH_APR_FROM_PORTS=yes for www/apache22 has been dissolved and may be
removed from your configuration files; devel/apr1 is always used now.
Please manually delete apache-2.\* if installed _before_ updating using
either portmaster or portupgrade:
pkg_delete -f apache-2.\*
Then, if you use portmaster:
portmaster -o devel/apr1 devel/apr
If you use portupgrade:
portupgrade -f -o devel/apr1 devel/apr
Finally, reinstall Apache port if you deleted it earlier and update ports as
usual (`XX' below is either 20 or 22):
portinstall www/apacheXX
20100512:
AFFECTS: users of www/apache20
AUTHOR: pgollucci@FreeBSD.org
The rc.d script has been renamed:
apache2.sh -> apache2
You'll need to update any crons wrappers, etc. for the new paths.
20100511:
AFFECTS: users of KDE SC 4
AUTHOR: kde@FreeBSD.org
KDE SC ports have been updated from 4.3.5 to 4.4.3. A number of libraries
was moved between packages. The recommended update procedure is to delete
kdelibs-experimental*, kdebase-4*, kdebase-workspace-4*,
kdebase-runtime-4*, kdepim-4*, kdepim-runtime-4*, and then update ports as
usual and install desired KDE4 ports:
# pkg_delete -f kdebase-\*4\* kdepim-\*4\* kdelibs-experimental-\*4\*
# portmaster -a (or portupgrade -aR)
In order to enabled Nepomuk semantic desktop search you have to install
databases/virtuoso (you don't need to manually configure or run virtuoso
server).
20100511:
AFFECTS: users of textproc/redland RDF engine
AUTHOR: kde@FreeBSD.org
Redland RDF engine has been split into redland itself and rasqal engine.
The recommended update procedure is to delete redland, then update ports
as usual and install desired RDF ports:
# pkg_delete -f redland-\*
# portmaster raptor (or portupgrade -r raptor)
20100511:
AFFECTS: users of multimedia/qt4-phonon, multimedia/qt4-phonon-gst,
multimedia/phonon, and multimedia/phonon-gstreamer
AUTHOR: kde@FreeBSD.org
WITH_QT_PHONON global knob has been introduced to allow selection between
multimedia/qt4-phonon* ports (a bit outdated Phonon, which is shipped with
Qt4) and multimedia/phonon* ports. Since KDE SC 4.4 requires fresh Phonon,
multimedia/phonon* ports are installed by default.
If you don't use KDE, you may set WITH_QT_PHONON=yes in /etc/make.conf
and continue to use Qt4 Phonon implementation ports.
If you want to use KDE SC 4.4 (or if you want the latest Phonon), do not
define WITH_QT_PHONON, delete multimedia/qt4-phonon* ports, and install
multimedia/phonon*:
If you use portmaster:
portmaster -o multimedia/phonon multimedia/qt4-phonon
portmaster -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
If you use portupgrade:
portupgrade -f -o multimedia/phonon multimedia/qt4-phonon
portupgrade -f -o multimedia/phonon-gstreamer multimedia/qt4-phonon-gst
20100510:
AFFECTS: users of security/gnome-keyring
AUTHOR: kwm@FreeBSD.org
libgnome-keyring was split out of the gnome-keyring package. Perform the
following before doing your normal upgrade steps:
pkg_delete -f "gnome-keyring-*"
portmaster security/gnome-keyring
or
pkgdb -Ff
portupgrade -R -x gnome-keyring -x libgnome-keyring gnome-keyring
pkg_deinstall -fO gnome-keyring
portinstall security/gnome-keyring
20100506:
AFFECTS: users of mail/nullmailer on FreeBSD 6.X
AUTHOR: glarkin@FreeBSD.org
The nullmailer port was recently updated with an rc.d script to correctly
daemonize nullmailer-send with daemon(8). On FreeBSD 6.X, daemon(8) does
not support "[-u user]" command-line switch, causing the nullmailer rc.d
script failure to start nullmailer-send.
Support for "[-u user]" command-line switch was recently MFC'd to 6-STABLE
(http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/146266). FreeBSD 6.X users
should patch and install daemon(8) by one of the methods described below.
If /usr/src is not yet populated, csup the 6-STABLE sources and run these
commands:
cd /usr/src/usr.sbin/daemon
make install
/usr/local/etc/rc.d/nullmailer start
If /usr/src is already populated with sources from a previous 6.X release,
use these commands:
cd /usr/src/usr.sbin/daemon
fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.c'
fetch 'http://people.freebsd.org/~glarkin/pr-links/daemon/patch-daemon.8'
patch -p0 daemon.c < patch-daemon.c
patch -p0 daemon.8 < patch-daemon.8
make install
/usr/local/etc/rc.d/nullmailer start
20100502:
AFFECTS: users of www/squid*
AUTHOR: miwi@FreeBSD.org
Starting with squid* the directory containing the default cache and log
directory was changed from $PREFIX/squid/ to /var/squid/.
The default values for the following Squid configuration parameters have
changed as shown below:
cache_log from $PREFIX/squid/logs/cache.log to /var/squid/logs/cache.log
cache_store_log from $PREFIX/squid/logs/store.log to /var/squid/logs/store.log
pid_filename from $PREFIX/squid/logs/squid.pid to /var/squid/logs/squid.pid
coredump_dir from $PREFIX/squid/cache to /var/squid/cache
Please check whether you need to define any of these variables in your
squid.conf to the old defaults explicitly before updating, especially if
you have set up automated log processing or automated log rotation. If you
define pid_filename in your squid.conf, you should also set squid_pidfile
to the same value in /etc/rc.conf, cf. $PREFIX/etc/rc.d/squid.
20100419:
AFFECTS: users of math/libgmp4
AUTHOR: ale@FreeBSD.org
The default gmp version in FreeBSD is now 5.0.x. The port directory
changed from math/libgmp4 to math/gmp. An entry has been added to MOVED
and all depending ports revisions have been bumped, so the update should
be handled correctly by usual port management tools such as portupgrade.
Portmaster users, please do the following before upgrading ports that
depend on gmp:
portmaster -o math/gmp math/libgmp4
20100409:
AFFECTS: users of lang/php5
AUTHOR: ale@FreeBSD.org
As of PHP 5.3, a few extensions were removed from or included into the core
PHP5 package. Follow the steps below to update your installation.
1) Delete the following packages (if installed):
- php5-dbase
- php5-ncurses
- php5-pcre
- php5-spl
- php5-ming
- php5-mhash
2) Rebuild lang/php5 and all ports that depend on it.
20100403:
AFFECTS: users of net/dgd
AUTHOR: glewis@FreeBSD.org
The kernel library has been separated from the main net/dgd port into its
own net/dgd-kernel port so that all libraries are on an equal footing.
This also reflects the split of the kernel library out from the main DGD
distribution.
If you wish to continue to use the kernel library you'll need to install
net/dgd-kernel after updating to dgd-1.4.1_2.
20100330:
AFFECTS: users of gstreamer-plugins-bad and gstreamer-plugins-good
AUTHOR: kwm@FreeBSD.org
Plugin moved from the -bad port to the -good port. Please follow the
instructions below before proceeding with normal update steps.
If you use portmaster:
portmaster gstreamer-plugins-bad
If you use portupgrade:
portupgrade -R multimedia/gstreamer-plugins-bad
20100328:
AFFECTS: users of graphics/png
AUTHOR: dinoex@FreeBSD.org
The PNG library has been updated to version 1.4.1. Please rebuild all
ports that depend on it.
If you use portmaster: make sure you update to portmaster version 2.20 or
newer, then do:
portmaster -r png-
If you use portupgrade:
portupgrade -fr graphics/png
20100221:
AFFECTS: users of rblibtorrent-devel
AUTHOR: dougb@FreeBSD.org
The port name has changed to libtorrent-rasterbar-14.
If you use portmaster:
portmaster -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel
If you use portupgrade:
portupgrade -o net-p2p/libtorrent-rasterbar-14 net-p2p/rblibtorrent-devel
20100216:
AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client
AUTHOR: dvl@FreeBSD.org
Bacula 5.x uses new shared objects which conflict with the shared objects
from previous versions. You should delete all existing Bacula packages
from your system before compiling Bacula 5.x, otherwise you'll encounter
compilation errors.
/usr/local/etc/rc.d/bacula-dir stop
/usr/local/etc/rc.d/bacula-sd stop
/usr/local/etc/rc.d/bacula-fd stop
pkg_delete 'bacula-*'
After upgrading, remember to run the database upgrade script supplied
with the port.
20100214:
AFFECTS: users of japanese/roundcube
AUTHOR: nork@FreeBSD.org
If you switch mail/roundcube to japanese/roundcube, please re-check
configuration files like ${PREFIX}/www/roundcube/config/main.inc.php.
At least, please add following settings:
$rcmail_config['message_charset_languages'] = array('en_US' => 'ISO-8859-1', ...
$rcmail_config['transfer_encoding_languages'] = array('en_US' => 'quoted-printable', ...
See also: ${PREFIX}/www/roundcube/config/main.inc.php.dist
20100207:
AFFECTS: users of www/firefox
AUTHORS: beat@FreeBSD.org, mandree@FreeBSD.org (Java plugin)
The www/firefox port has been updated to 3.6. From now on www/firefox
will contain the most recent version of Firefox. Older but still
supported releases will be available in www/firefox3 and www/firefox35.
In order to update to Firefox 3.6 please delete your older installed
version of Firefox first and install www/firefox afterwards. Please
make sure all your addons are compatible with Firefox 3.6 and backup
your ~/.mozilla directory prior to the first launch of Firefox 3.6.
Note that in order to use Java with Firefox 3.6, you need to install
java/openjdk6, build it with the "WEB" option enabled and use the Iced
Tea plugin. To achieve the latter, each user needs to create a
symlink to the Icedtea plugin as described in the Browsers/Firefox and
Java[tm] Plugin section in the handbook:
ln -s /usr/local/openjdk6/jre/lib/IcedTeaPlugin.so \
$HOME/.mozilla/plugins
20100207:
AFFECTS: users of Mesa3D libraries and x11-drivers/xf86-video-nouveau
AUTHOR: nork@FreeBSD.org
If you want to use Mesa3D 7.6.1 and libdrm 2.4.17 rather than 7.4.4
and 2.4.12, you must define WITHOUT_NOUVEAU global macro, at least,
enabled on graphics/libGL*, graphics/libglut, graphics/dri,
graphics/mesa-demos, and graphics/libdrm. And please give up using
x11-drivers/xf86-video-nouveau.
At this time, I cannot enable latest Mesa3D and libdrm, because they
break xf86-video-nouveau. But old (current?) Mesa3D and libdrm do not
break any drivers.
AMD Radeon HD 2xxx/3xxx/4xxx users: If you use AMD Radeon HD [234]xxx
series, please define WITHOUT_NOUVEAU global macro. You can then use
OpenGL Hardware Accelerator feature on these series.
20100206:
AFFECTS: users of net/samba4-devel
AUTHOR: timur@FreeBSD.org
Default configuration file was moved to ${LOCALBASE}/etc/smb4.conf to
avoid conflicts with the installed net/samba3?. Also, userland utils
are not installed by default, which should also help with the parallel
setup of Samba3 and Samba4.
20100205:
AFFECTS: users of Qt 3 and KDE 3
AUTHOR: itetcu@FreeBSD.org
When building qt33 and kdelibs3 (at least), while they are installed,
because of -L/usr/local/lib being passed too soon, the currently installed
libraries are used instead of the ones from the build. This makes the
build fail if you updated any of the libraries these Qt/KDE libraries are
linked against (e.g. libjpeg).
For the moment the workaround, when you get to this, is to move the old lib
out of the way, e.g.:
mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old && \
cd /usr/ports/x11-toolkits/qt33/ && make && \
mv /usr/local/lib/libqt-mt.so.old /usr/local/lib/libqt-mt.so && \
portmaster -C x11-toolkits/qt33 (or portupgrade -w qt-33\*) ...
20100205:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
Default version of Perl was bumped to 5.10.
If you already have lang/perl5.8 installed, and want to switch to
lang/perl5.10 please follow instructions in the entry 20090328 in this
file.
20100205:
AFFECTS: users of net/samba34
AUTHOR: timur@FreeBSD.org
This port was developed with the generous help of Florent Brodin.
The default passdb backend has been changed to `tdbsam'! That breaks
existing setups using the `smbpasswd' backend without explicit
declaration! Please use `passdb backend = smbpasswd' if you would like
to stick to the `smbpasswd' backend or convert your smbpasswd entries
using e.g. `pdbedit -i smbpasswd -e tdbsam'.
The `tdbsam' backend is much more flexible concerning per user
settings like `profile path' or `home directory' and there are some
commands which do not work with the `smbpasswd' backend at all.
20100130:
AFFECTS: users of audio/sdl_mixer and graphics/sdl_image
AUTHOR: mva@FreeBSD.org
The SDL_mixer and SDL_image libraries have new shared library versions.
Please rebuild all ports that depend on them.
If you use portmaster:
portmaster -r sdl_mixer-
portmaster -r sdl_image-
If you use portupgrade:
portupgrade -fr audio/sdl_mixer
portupgrade -fr graphics/sdl_image
20100125:
AFFECTS: users of audio/openal and graphics/openal-soft
AUTHOR: mva@FreeBSD.org
The default OpenAL implementation was switched to audio/openal-soft.
To update all ports correctly, the following steps have to be performed.
pkg_delete -f openal-\*
If you use portmaster:
portmaster -o audio/openal-soft audio/openal
portmaster -r audio/openal-soft
If you use portupgrade:
portupgrade -ro audio/openal audio/openal-soft
If you want to stick with audio/openal, please specify the following ports
make flag within /etc/make.conf (or an appropriate configuration file for
your ports):
WANT_OPENAL=si
20100122:
AFFECTS: users of sysutils/policykit and sysutils/polkit
AUTHOR: gnome@FreeBSD.org
Due to a recent change in sysutils/policykit, both sysutils/policykit,
and sysutils/polkit need to be rebuilt, but in a certain order. First,
upgrade sysutils/policykit to 0.9_6. Then, force rebuild and reinstall
of sysutils/polkit. If you do not do this, applications which depend
on polkitd will fail.
20100113:
AFFECTS: users of emulators/virtualbox
AUTHOR: beat@FreeBSD.org
Port has been renamed to emulators/virtualbox-ose to reflect that we are
using the OSE version. A separate port for the kernel modules has been
created: emulators/virtualbox-ose-kmod.
Please see http://wiki.freebsd.org/VirtualBox for update instructions.
20100107:
AFFECTS: users of security/openvpn*
AUTHOR: mandree@FreeBSD.org
security/openvpn has been moved to security/openvpn20 and upgraded to 2.0.9.
security/openvpn has been upgraded to 2.1.1, and security/openvpn-devel has
been removed.
Regular upgrades of the security/openvpn port should succeed without
manual intervention, but if you want to stick to openvpn 2.0 or if you
had been using openvpn-devel, manual intervention is needed, as
follows:
If you'd been using the security/openvpn-devel port, please use one of
these commands for upgrading:
portmaster -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel
portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn security/openvpn-devel
If you want to stick to openvpn 2.0, please use one of these two
upgrade commands:
portmaster -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn
portupgrade -m-DDISABLE_CONFLICTS -o security/openvpn20 security/openvpn
20100106:
AFFECTS: users of devel/websvn
AUTHOR: miwi@FreeBSD.org
The default install directory for websvn has changed from
${PREFIX}/www/data/websvn to ${PREFIX}/www/websvn.
If you are updating from a previous version, to preserve your settings
and data, please do the following:
mv /usr/local/www/data/websvn /usr/local/www
Then update as usual.
20091227:
AFFECTS: users of sysutils/grok
AUTHOR: Wesley Shields <wxs@FreeBSD.org>
The sysutils/grok port has been completely re-written. Configuration files
will need to be reviewed. Also, the RC script has been removed until it can
be made to work with the new version.
20091226:
AFFECTS: users of net-mgmt/ndoutils
AUTHOR: pgollucci@FreeBSD.org
When upgrading you'll need to run ./upgradedb; see UPGRADING file.
20091214:
AFFECTS: users of net/grdc
AUTHOR: avl@FreeBSD.org
Grdc has been renamed to Remmina upstream, and the port was also renamed
to reflect this. After installing remmina port you will need to download
the ``grdc2remmina.sh'' script and run it as your normal user(s) that
have ~/.grdc. The script will only create ~/.remmina directory and move
grdc config files to the new path; it does not affect anything else.
$ fetch http://people.freebsd.org/~avl/script/grdc2remmina.sh
$ sh grdc2remmina.sh
20091213:
AFFECTS: users of net-mgmt/zabbix, net-mgmt/zabbix-agent
AUTHOR: Jim Riggs <ports@christianserving.org>
In order to simplify configuration and better separate the different
components of Zabbix, the former zabbix port has been split into three:
zabbix-server, zabbix-proxy, and zabbix-frontend. Each component has
distinct functionality and may be installed independently on separate
systems. The existing zabbix-agent port remains.
Additionally, the new zabbix-frontend port now (correctly) installs the
PHP frontend in PREFIX/www/zabbix. The old zabbix port installed the
files in PREFIX/share/zabbix/php. Web server configurations must be
updated accordingly.
Finally, Zabbix has been updated to version 1.8. Not everyone may be
able to upgrade from version 1.6 immediately, though, so 1.6.8 versions
of the ports are also available as zabbix16-server, zabbix16-proxy,
zabbix16-agent, and zabbix16-frontend.
20091206:
AFFECTS: users of emulators/qemu
AUTHOR: nox@FreeBSD.org
The port has been updated to 0.11.1, which no longer enables kqemu by
default (if built with KQEMU knob on), now you also have to explicitly
pass -enable-kqemu (or -kernel-kqemu as with the previous versions)
if you want to use it. Also note the 0.11 stable branch is the last
qemu branch that still supports kqemu, so if you depend on reasonably
fast emulation on FreeBSD you should start looking for alternatives
some time soon. (VirtualBox?)
20091120:
AFFECTS: users of mail/postfixadmin
AUTHOR: Terry Sposato <tabmow@freenode.net>
Due to a bug in the previous postfixadmin port, existing users need to
backup their config.inc.php before they upgrade to postfixadmin-2.3 or
later and put it in place after the upgrade is complete.
20091120:
AFFECTS: users of security/f-prot
AUTHOR: Tim Bishop <tdb@FreeBSD.org>
The main f-prot command is now named fpscan. Virus definitions are
updated using the fpupdate command. fpupdate will automatically run
from periodic every day. To disable set the following option in
/etc/periodic.conf:
fpupdate_enable="NO"
The f-prot port now only works on i386.
20091118:
AFFECTS: users of java/jboss5
AUTHOR: Jonathan Chen <jonc@chen.org.nz>
The JBoss directory structure has been reorganised to follow hier(7)
guidelines more closely; in particular, transient and deployment files
were moved to /var/jboss5, thus allowing /usr to be read-only.
20091118:
AFFECTS: users of www/redmine
AUTHOR: Bernhard Froehlich <decke@bluelife.at>
After the upgrade you need to generate a session secret before restarting
the application. This is to protect you from cross-site request forgery.
From your Redmine directory, simply run the following command once:
# rake config/initializers/session_store.rb
then upgrade as usual:
# rake db:migrate RAILS_ENV=production
20091114:
AFFECTS: users of emulators/win4bsd
AUTHOR: Mario S F Ferreira <lioux@FreeBSD.org>
The new port now depends on emulators/kqemu-kmod instead of installing
its own version. Therefore, you should make sure that no other kqemu.ko
modules are installed:
# pkg_delete -f win4bsd\*
# rm -f /boot/kernel/kqemu.ko
# pkg_delete -f kqemu-kmod\*
# portinstall emulators/win4bsd
Do not forget to enable kqemu on rc.conf since win4bsd will not work
without it.
20091018:
AFFECTS: users of databases/mysql54-server
AUTHOR: Alex Dupre <ale@FreeBSD.org>
After the upgrade the server may fail to start due to changes in the
default values of innodb_log_files_in_group and innodb_log_file_size,
which differ from those in earlier 5.4 releases.
You should discard the old InnoDB log files and let MySQL 5.4.3 create
new ones. It is necessary to shut down your current server cleanly so
that no outstanding transaction information remains in the log.
See here: http://dev.mysql.com/doc/refman/5.4/en/news-5-4-3.html
20091014:
AFFECTS: users of mail/heirloom-mailx
AUTHOR: Alexander Logvinov <avl@FreeBSD.org>
Since SourceForge switched to the new File Release System,
mail/heirloom-mailx has wrong package name. All users who have
mail/heirloom-mailx installed after 22 August 2009 should run the
following commands:
# pkg_delete "\-mailx-12.4_1"
or
# rm -r /var/db/pkg/-mailx-12.4_1
# rm -r /var/db/ports/-mailx
# cd /usr/ports/mail/heirloom-mailx && make install clean
20090921:
AFFECTS: users of archivers/lzmautils, archivers/lzmautils-devel
AUTHOR: Christian Weisgerber <naddy@FreeBSD.org>
The XZ Utils distribution has superseded LZMA Utils, so the xz port has
been added and the lzmautils ports have been removed. To perform the
move, run one of the following commands:
If using portupgrade:
# portupgrade -o archivers/xz lzmautils\*
If using portmaster:
# portmaster -o archivers/xz archivers/lzmautils
or
# portmaster -o archivers/xz archivers/lzmautils-devel
as applicable.
20090919:
AFFECTS: users of mail/postfix-postfwd
AUTHOR: Sahil Tandon <sahil@tandon.net>
The recipient rate-limiting feature is now called via rcpt() command
instead of with mrcpt() as in previous versions. Make sure to update
your postfwd.conf if you use this feature.
20090917:
AFFECTS: users of www/epiphany, x11/yelp, graphics/librsvg2,
x11/toolkits/py-gnome-extras, and www/epiphany-extensions
AUTHOR: gnome@FreeBSD.org
The default Gecko provider has been changed from www/firefox to
www/libxul. Firefox 2.x is now marked FORBIDDEN for security reasons,
and libxul is new, stable, and preferred Gecko provider. Libxul uses
the same Gecko engine as Firefox 3.0.x.
Some ports may fail to upgrade or run when both www/firefox and libxul
are installed on the same system. To make sure everything runs smoothly,
uninstall www/firefox, then install libxul, then upgrade the affected
ports.
20090915:
AFFECTS: users of sysutils/gosa
AUTHOR: Denis Shaposhnikov <dsh@wizard.volgograd.ru>
Please read the following:
https://oss.gonicus.de/labs/gosa/wiki/DocumentationInstallingUpdatingGOsa
before upgrading this port. And don't forget to check your slapd.conf
because gosa scheme files were changed. Should you have any problems
during LDAP migration step, try to restart your PHP process.
20090913:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
In order to fix a performance bug, all wikis need to be rebuilt on
upgrade to version 3.1415926.
20090912:
AFFECTS: users of ports that have set USE_FORTRAN=yes
AUTHOR: gerald@FreeBSD.org
Ports that are built using the Fortran frontend of GCC (aka gfortran)
will now use lang/gcc44 as the default compiler.
20090911:
AFFECTS: users of lang/perl5.10
AUTHOR: skv@FreeBSD.org
lang/perl5.10 has been updated to 5.10.1. You should update everything
that depends on perl. The easiest way to do that is to use
"perl-after-upgrade" script supplied with lang/perl5.10. Please see its
manual page for details.
If you want to switch to lang/perl5.10 from lang/perl5.8 please follow
instructions in the entry 20090328 in this file.
20090910:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 2.3.4. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20090909:
AFFECTS: users of gstreamer-plugins-bad gstreamer-plugins-good
AUTHOR: kwm@FreeBSD.org
Due to the move of several plugins from gstreamer-plugins-bad to
gstreamer-plugins-good, it is necessary to update gstreamer-plugins-bad
first:
portupgrade -R gstreamer-plugins-bad
or, using portmaster:
portmaster gstreamer-plugins-bad
After this step, the normal upgrade procedure can be used.
20090831:
AFFECTS: users of emulators/linux-systemsimcell
AUTHOR: stast@bsdportal.ru
The port emulators/linux-systemsimcell has been updated to 3.1.25.
Systemsimcell emulator now has a new dependency: x11-toolkits/linux-f10-blt.
So you need to switch to linux-f10 ports in order to use 3.1.25 version.
20090828:
AFFECTS: users of mail/dovecot and mail/dovecot-sieve
AUTHOR: yds@CoolRat.org
dovecot-sieve has been updated to a new implementation compatible with
dovecot 1.2.x. For details of what this means please refer to:
http://wiki.dovecot.org/LDA/Sieve/Dovecot#Migration_from_CMUSieve
20090827:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.15.1 now. 1.14.1 version was preserved as
www/mediawiki114 port.
20090818:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
GnuTLS has been updated to 2.8.3 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
20090816:
AFFECTS: users of astro/celestia and KDE
AUTHOR: danfe@FreeBSD.org
Celestia can now be compiled with KDE3 frontend (you can enable it with
CELESTIA_UI=kde when building). It is very feature-rich, as it offers
contextual menus, toolbars, KDE integration, internationalization,
bookmarks, etc. If you use Celestia and KDE as your desktop, you might
want to rebuild the port so it integrates into your environment better.
20090815:
AFFECTS: users of mail/dovecot
AUTHOR: wxs@FreeBSD.org
Dovecot has been updated to version 1.2.3. The configuration file has
changed significantly. Please see http://wiki.dovecot.org/Upgrading/1.2
for details of what this means.
20090804:
AFFECTS: users of multimedia/phonon*, x11/kdebase4*, deskutils/kdepim4
AUTHOR: kde@FreeBSD.org
KDE4 has been updated to version 4.3.0. KDE now uses qt4-phonon;
multimedia/phonon and multimedia/phonon-gstreamer are deprecated in
favor of their qt4 equivalents. You can still use multimedia/phonon-xine
however. A number of files have been moved between packages. The
recommended update procedure is to delete phonon, phonon-gstreamer,
kdebase-*4*, kdepim-4*, then update ports as usual and install desired
KDE4 ports:
# pkg_delete -f phonon-4\* phonon-gstreamer\* kdebase-\*4\* kdepim-4\*
# portmaster -a (or portupgrade -a)
# cd ${PORTSDIR}/x11/kde4 && make config && make install clean
20090804:
AFFECTS: users of devel/dbus-qt4, devel/qt4-designer
AUTHOR: kde@FreeBSD.org
Qt4 ports have been updated to 4.5.2. The recommended update procedure
is to delete qt4-dbus and qt4-designer, then update ports as usual.
Install qt4-designer if needed.
20090802:
AFFECTS: users of devel/libtool15 and devel/libltdl15
AUTHOR: mezz@FreeBSD.org
The devel/libtool15 and devel/libltdl15 ports have been moved to libtool22
and libltdl22, respectively, then updated to 2.2.6a. You will need to run
portmaster or portupgrade to properly perform the upgrade:
If using portmaster:
portmaster -o devel/libtool22 devel/libtool15
portmaster -o devel/libltdl22 devel/libltdl15
If using portupgrade:
portupgrade -o devel/libtool22 libtool-1.5\*
portupgrade -o devel/libltdl22 libltdl-1.5\*
After that, you will need to rebuild all ports that depend on libltdl.
Since all dependent ports' PORTREVISIONs have been bumped, you can run
portupgrade or portmaster with `-a' option to complete the upgrade.
20090801:
AFFECTS: users of x11-drivers/xf86-video-nouveau
AUTHOR: rnoland@FreeBSD.org
An updated libdrm and xf86-video-nouveau have been committed. These
update the API version to 0.0.14 and if you are using DRM you will need
to update your kernel patch. See pkg-message in xf86-video-nouveau for
details.
20090730:
AFFECTS: users of www/tomcat6
AUTHOR: ale@FreeBSD.org
Tomcat has been updated to 6.0.20 release and the installation directory
is changed from apache-tomcat6.0 to apache-tomcat-6.0. Backup your
configuration files before updating Tomcat, since the previous port will
delete them on deinstall.
20090729:
AFFECTS: users of sysutils/heartbeat
AUTHOR: ports@encarnate.com
Heartbeat has been upgraded to the 2.1.4 release. Older configurations
based on version 1 should still work. Read more about the new features
and possible configuration changes at the following URLs:
http://clusterlabs.org/wiki/Documentation (Configuration 0.6 Explained)
http://www.linux-ha.org/GettingStartedRevisedV2
20090724:
AFFECTS: users of www/rubygem-rails
AUTHOR: pgollucci@FreeBSD.org
Rails has been updated to 2.3.3. As always, make sure you check the
changes at http://weblog.rubyonrails.org/.
20090720:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.17, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
or
# portmaster -r net/openldap24-client
20090719:
AFFECTS: users of graphics/jpeg
AUTHOR: dinoex@FreeBSD.org
The IJG jpeg library has been updated to version 7.0. Please rebuild all
ports that depend on it.
If you use portmaster:
portmaster -r jpeg-
Or, if you would prefer a more gradual approach:
portmaster -w jpeg- (Check the man page for more information)
If you use portupgrade:
portupgrade -fr graphics/jpeg
20090704:
AFFECTS: users of www/yaws
AUTHOR: olgeni@FreeBSD.org
The default configuration file path was changed to ${LOCALBASE}/etc/yaws
in version 1.83.
Please remember to update your configuration before upgrading.
20090628:
AFFECTS: users of www/firefox3-devel
AUTHOR: gecko@FreeBSD.org
If your Firefox crashes with the following message while viewing a
HTML5 page: "Bad system call (core dumped)" you need to load the sem
module (kldload sem).
To load sem module on every boot, put the following into your
/boot/loader.conf:
sem_load="YES"
20090624:
AFFECTS: users of mail/crm114
AUTHOR: glebius@cell.glebius.int.ru
The new version of crm uses a new format for css files. Old files should
be rebuilt or started from scratch. If not done, crm114 will lose any
mail processed via it.
20090620:
AFFECTS: users of gstreamer-plugins-bad, gstreamer-plugins-good, and
gstreamer-plugins-ugly ports
AUTHOR: kwm@FreeBSD.org
Due to the move of several plugins from gstreamer-plugins-bad to
gstreamer-plugins-good and gstreamer-plugins-ugly, it is necessary to
update gstreamer-plugins-bad first:
portupgrade -R gstreamer-plugins-bad
or, using portmaster:
portmaster gstreamer-plugins-bad
20090619:
AFFECTS: users of net-p2p/transmission-daemon
AUTHOR: mezz@FreeBSD.org
The UID/GID of transmission has been changed from 919 to 921. The data
configure has been changed from ${PREFIX}/etc/transmission/home/.config
to ${PREFIX}/etc/transmission/home. To update the UID/GID:
# pw groupmod transmission -g 921
# pw usermod transmission -u 921 -g 921
20090618:
AFFECTS: users of www/p5-Catalyst
AUTHOR: pgollucci@FreeBSD.org
Most applications and plugins should run unaltered on Catalyst 5.80.
However, a lot of refactoring work has taken place, and several changes
have been made which could cause incompatibilities. If your application
or plugin is using deprecated code, or relying on side effects, then you
could have issues upgrading to this release.
http://search.cpan.org/~mramberg/Catalyst-Runtime-5.80005/lib/Catalyst/Upgrading.pod
20090617:
AFFECTS: users of emulators/virtualbox
AUTHOR: beat@FreeBSD.org
The GID of virtualbox has changed due to a conflict with databases/couchdb.
Update GID of vboxusers after updating the port:
# pw groupmod vboxusers -g 920
20090617:
AFFECTS: users of math/fftw3 math/fftw3-long math/fftw3-float
AUTHOR: db@FreeBSD.org
The Fortran option has removed from fftw3 and moved into slave ports,
math/fftw3-fortran math/fftw3-long-fortran and math/fftw3-float-fortran.
20090615:
AFFECTS: users of x11-wm/enlightenment and x11-wm/enlightenment-devel
AUTHOR: gahr@FreeBSD.org
The development version of the Enlightenment window manager, a.k.a. E17,
was moved from x11-wm/enlightenment-devel to x11-wm/enlightenment. The
DR16 branch now resides in x11-wm/e16.
20090615:
AFFECTS: users of multimedia/mlt++
AUTHOR: beat@FreeBSD.org
The multimedia/mlt++ port was incorporated into multimedia/mlt since
version 0.4.2. Delete multimedia/mlt++ first and then install/update
multimedia/mlt.
20090613:
AFFECTS: users of www/hudson
AUTHOR: hq@FreeBSD.org
Hudson is now running as a standalone process and no longer relies on
Apache Tomcat. As such, it should now be configured by defining
hudson_* variables in rc.conf. See comments from rc.d script for further
details.
The default setup is using the same port numbers and HTTP URL prefix as
before in order to reduce the effort of upgrading the port. Hence, it
may conflict with some running Apache Tomcat instance. To fix this
problem, you may either deinstall www/tomcat6, or use the following
settings in hudson_args from /etc/rc.conf:
--httpPort=??? --ajp13Port=???
20090611:
AFFECTS: users of www/apache22
AUTHOR: pgollucci@FreeBSD.org
Two rc.d scripts have been renamed:
apache22.sh -> apache22
htcacheclean.sh -> htcacheclean
You'll need to update any crons wrappers, etc. for the new paths.
20090608:
AFFECTS: users of lang/python* and py-*
AUTHOR: miwi@FreeBSD.org
The default version of Python has been changed from 2.5.x to 2.6.x.
If you have 2.5.x installed, perform an upgrade of lang/python25 to
lang/python26 with one of the following commands:
If using portupgrade:
# portupgrade -o lang/python26 lang/python25
If using portmaster:
# portmaster -o lang/python26 lang/python25
If you want to retain 2.5.x as default Python version, set the
PYTHON_DEFAULT_VERSION variable to 'python2.5' (without quotes) in
/etc/make.conf, then go to lang/python and perform the following
command:
# portupgrade -R python
Once the installed Python has been updated to 2.6, by using the
method above, it is required to run the upgrade-site-packages target in
lang/python to assure that site-packages are made available to the new
Python version.
If using portupgrade:
# cd /usr/ports/lang/python && make upgrade-site-packages
If using portmaster:
# cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
The portmaster case can take quite some time to complete due to the lack of
cached information that the portupgrade suite uses (specifically pkg_which).
This is not the fault of portmaster.
20090606:
AFFECTS: users of java/eclipse
AUTHOR: glewis@FreeBSD.org
The update to 3.4.2 changes the location of the metadata for eclipse to
be more in line with what is used on other platforms. This means that
after the update plugins that have been installed by a user with the
built in Update Manager will need to be reinstalled.
20090605:
AFFECTS: users of mail/postfix
AUTHOR: itetcu@FreeBSD.org
Version 2.6.1 introduced a POLA violation by expecting aliases.db to be
in /etc/mail/aliases.db (not /etc/aliases.db). With this version the
location is reverted to the right place.
If you updated your installation to 2.6.1 you need to run newaliases(1)
again after you installed 2.6.2.
20090603:
AFFECTS: users of japanese/font-mplus-ipa (and old japanese/ipa-ttfonts)
AUTHOR: hrs@FreeBSD.org
IPAUIGothic has been updated to a version included in IPA font
version 002.03 and added as a separated port
"japanese/font-ipa-uigothic". And the font-mplus-ipa has been
updated to remove the old IPAUIGothic.
Thus the old ipa-ttfonts is almost equivalent to font-ipa +
font-ipa-uigothic + font-mplus-ipa. Note that these three packages
have different licenses from each other.
20090601:
AFFECTS: users of devel/cvs-devel
AUTHOR: wxs@FreeBSD.org
cvs-devel no longer installs /bin/cvs and /bin/cvsbug. These are now
installed into ${PREFIX}/bin. If you wish to use these please be aware
of this change with respect to your path.
20090531:
AFFECTS: users of devel/viewvc
AUTHOR: pgollucci@FreeBSD.org
viewvc.conf and templates are not compatible to 1.0.x version, even the
database scripts have changed. For details see:
http://viewvc.tigris.org/source/browse/*checkout*/viewvc/trunk/docs/upgrading-howto.html
20090530:
AFFECTS: users of Japanese and Chinese fonts
AUTHOR: hrs@FreeBSD.org
Ports for Japanese fonts have been reorganized in the following way:
japanese/ipa-ttfonts -> japanese/font-mplus-ipa
japanese/ipa-ttfonts -> japanese/font-ipa
japanese/kochi-ttfonts -> japanese/font-kochi
japanese/mplusfonts -> japanese/font-mplus
japanese/sazanami-ttf -> japanese/font-sazanami
japanese/shinonome -> japanese/font-shinonome
japanese/umefont -> japanese/font-ume
japanese/vlgothic -> japanese/font-vlgothic
While basically these are port name changes for consistency,
installation directories are also changed:
font files -> ${PREFIX}/share/${PORTNAME}/*
symlinks -> ${PREFIX}/share/fonts/{TTF,OTF,fontname,...}/*
symlinks -> ${PREFIX}/lib/X11/fonts/{TTF,OTF,misc,fontname,...}/*
A user-visible one is that the directory name "TrueType" is replaced
with "TTF".
Also, japanese/font-std and chinese/font-std have been added as
standard fonts used in the Ports Collection. Currently they
contain:
std.ja_JP/Mincho
std.ja_JP/Gothic
std.ja_JP/Ryumin-Light
std.ja_JP/GothicBBB-Medium
std.zh_CN/STHeiti-Regular
std.zh_CN/STSong-Light
std.zh_CN/MSung-Light
std.zh_CN/MHei-Medium
under ${PREFIX}/share/fonts/. They are just symlinks to
corresponding font files. The symlink names are based on popular
PostScript font names.
Applications should refer the font files via XLFD or fontconfig
first. If they need a direct reference to the font file, please use
files in std.*/*. This is because direct reference to a specific
font name in an application configuration file makes the maintenance
difficult when the font file name is changed, for example.
20090516:
AFFECTS: users of devel/viewvc
AUTHOR: pgollucci@FreeBSD.org
OPTION APACHE2 has been changed to APACHE (WITH_APACHE)
WITH_APACHE2 is deprecated and is being removed.
APACHE_PORT will be pulled in when WITH_APACHE is selected
20090516:
AFFECTS: users of print/cups-base and portupgrade
AUTHOR: dinoex@FreeBSD.org
The print/cups port has been split into multiple ports. If upgrading
from 1.3.10_1 and below, you must remove the installed version first.
20090412:
AFFECTS: users of sysutils/bacula-server
AUTHOR: wxs@FreeBSD.org
sysutils/bacula-server now uses a new catalog format. If upgrading
from the old version please use the update_bacula_tables script
provided with the port before restarting bacula.
20090410:
AFFECTS: users of www/trac-email2trac
AUTHOR: brooks@FreeBSD.org
bin/email2trac.py and bin/delete_spam.py are now installed without the
.py extension to make the suid run_email2trac work and match the online
documentation. If you were using them in scripts or alias entries, you
will need to update paths accordingly.
20090401:
AFFECTS: users of Fedora 8 Linux infrastructure ports
AUTHOR: bsam@FreeBSD.org
ATTENTION! Those ports are not default for any version of FreeBSD for now
and may be used with FreeBSD versions 7.2 and above (8-CURRENT is better)
using compat.linux.osrelease=2.6.16 and linux_base-f8. Please, note that
2.6.16 is not fully supported on 7.x (ex., some syscalls are missing
and cannot be MFCed due to a native FreeBSD ABI breakage).
For more information about transition please read item "20070327: AFFECTS:
users of emulators/linux_base-fc6". That note may be used for upgrading
to linux_base-f8 and Fedora 8 Linux infrastructure ports as well.
If you want to switch to linux-f8 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f8
OVERRIDE_LINUX_NONBASE_PORTS=f8
20090328:
AFFECTS: users of lang/perl*
AUTHOR: skv@FreeBSD.org
lang/perl5.10 is out. If you want to switch to it from, for example
lang/perl5.8, that is:
Portupgrade users:
0) Fix pkgdb.db (for safety):
pkgdb -Ff
1) Reinstall new version of Perl (5.10):
env DISABLE_CONFLICTS=1 portupgrade -o lang/perl5.10 -f perl-5.8.\*
2) Reinstall everything that depends on Perl:
portupgrade -fr perl
Portmaster users:
env DISABLE_CONFLICTS=1 portmaster -o lang/perl5.10 lang/perl5.8
portmaster -r perl-
Note: If the "perl-" glob matches more than one port you will need to
specify the name of the Perl directory in /var/db/pkg explicitly.
20090327:
AFFECTS: users of security/clamav
AUTHOR: garga@FreeBSD.org
After version 0.95 clamav-milter does not accept parameters by command
line. If you are using $clamav_milter_flags on rc.conf to set its
parameters you will need to move to new ${PREFIX}/etc/clamav-milter.conf.
20090319:
AFFECTS: users of shells/bash3
AUTHOR: ehaupt@FreeBSD.org
With the addition of shells/bash version 4.x, people wanting to stick
with bash 3.x should perform the following update:
$ portupgrade -f -o shells/bash3 bash
20090318:
AFFECTS: users of www/suphp
AUTHOR: yzlin@cs.nctu.edu.tw
The suPHP port has been upgraded to 0.7.x. This new version of suPHP has
some new features and changes for the configuration file:
- Multiple path (with patterns) & variable substitution support for
docroots
- Double-quoted strings at section '[handlers]'
ex. application/x-httpd-php="php:/usr/local/bin/php-cgi"
These changes may lead to internal server error if without modifications
of the configuration file from previous version.
20090316:
AFFECTS: users of www/geeklog
AUTHOR: beat@FreeBSD.org
To follow the standards this port has received a small reworking.
WWW_DIR (that defaulted to PREFIX/www/data/geeklog) is deprecated,
use WWWDIR (defaults to PREFIX/www/geeklog).
20090316:
AFFECTS: users of net-im/ejabberd
AUTHOR: skylord@linkline.ru
ejabberd's UID and GID have changed (PR ports/105122). Users are advised
to check all configuration files and data in /var/spool/ejabberd to
ensure everything has the correct owner/group.
20090316:
AFFECTS: users of sysutils/lire
AUTHOR: edwin@FreeBSD.org
Lire now requires DBD::SQLite, which uses SQLite 3.0. This means that the
Lire database format has changed. If you have one or more old Lire stores,
you will need to convert each of them from SQLite2 format to SQLite3 like
this:
$ sqlite oldstore.db .dump | sqlite3 newstore.db
This assumes that you have both SQLite2 and SQLite3 installed on your
system, and that the names of the command line interface for the old and
new version are `sqlite' and `sqlite3' respectively (this is at least
correct for Fedora).
20090310:
AFFECTS: users of multimedia/mythtv
AUTHOR: glarkin@FreeBSD.org
The upgrade from version 0.20 to version 0.21 should be transparent.
Any changes to the database structure should be applied automatically.
However, it is strongly recommended that you back up your database before
installing a new version of MythTV.
For example:
$ mysqldump -u mythtv -pmythtv mythconverg -c > mythtv_backup.sql
To restore (assuming that you've dropped the database):
$ mysql -u root
mysql>create database mythconverg;
mysql>exit
$ mysql -u mythtv -pmythtv mythconverg < mythtv_backup.sql
20090309:
AFFECTS: users of devel/libusb on CURRENT
AUTHOR: stas@FreeBSD.org
FreeBSD libusb20 was renamed to libusb in r189585 and thus, being fully
compatible with libusb20, replaces devel/libusb on HEAD. devel/libusb
should not be used on these systems. Users of libusb-dependent ports
are advised to remove libusb package from their systems, and rebuild all
libusb dependencies. One of the possible ways to achieve this is
listed below:
# set tempfile=`mktemp /tmp/usbports.XX`
# pkg_info -qR /var/db/pkg/libusb-* > ${tempfile}
# pkg_delete -f /var/db/pkg/libusb-*
# cat ${tempfile} | xargs portupgrade -f
# rm -f ${tempfile}
20090309:
AFFECTS: users of multimedia/phonon
AUTHOR: kde@FreeBSD.org
multimedia/phonon port has been split into phonon itself, phonon-xine,
and phonon-gstreamer backends. After updating phonon port you have
to install at least one backend; phonon-xine backend is recommended
for KDE.
20090308:
AFFECTS: users of emulators/qemu
AUTHOR: nox@FreeBSD.org
The port has been updated to 0.10.0, which now uses the newer
(incompatible) kqemu-kmod-devel port that now also works for the
32 bit "qemu" executable on amd64. If you upgrade emulators/qemu
with the KQEMU knob on, you have to
# pkg_delete kqemu-kmod-1\*
the old kqemu version first if it is installed.
20090304:
AFFECTS: users of comms/py-gammu
AUTHOR: bsam@FreeBSD.org
The port comms/py-gammu was incorporated into comms/gammu since
1.23.0. Delete comms/py-gammu first and then deinstall/reinstall
comms/gammu with option WITH_PYTHON_GAMMU=YES.
20090304:
AFFECTS: users of x11-wm/xfce4
AUTHOR: oliver@FreeBSD.org
When upgrading from Xfce 4.4 to 4.6 make sure you uninstall the following
ports:
x11/libxfce4mcs
sysutils/xfce4-mcs-manager
sysutils/xfce4-mcs-plugins
x11-themes/xfce4-icon-theme
You may uninstall them before you start the upgrade procedure (preferred)
or even afterwards when the upgrade went fine.
Please also note that Xfce 4.6 does not come with an icon theme any more.
Xfce 4.6 now depends on the Tango theme which is now installed by default.
The default installation of Xfce is also adjusted to use this icon theme
instead of the Xfce 4.4 standard Rodent theme. If you are upgrading from
Xfce 4.4 to 4.6 you probably still have the Rodent theme selected. This
will lead to several "missing" icons when starting up Xfce.
Make sure to switch as well to the Tango theme. To do this just open the
Settings Manager and select Appearance. Inside the Appearance dialog
switch to the Icons tab and select the "Tango" entry in the list on the
left side of the Icons tab.
For enabling the Reboot/Shutdown functionality of Xfce's logout dialog
please read the note which gets printed out after the installation of
x11-wm/xfce4 about how to configure PolicyKit.
20090223:
AFFECTS: users of Tcl/Tk
AUTHOR: mm@FreeBSD.org
The default version of Tcl/Tk has been changed from 8.4 to 8.5.
To restore old behavior and prefer using Tcl 8.4 with supported ports set
WITH_TCL_VER=84 in /etc/make.conf. This has no effect on ports that have
USE_TCL=yes or USE_TK=yes. They stick to the new default version and have
to be updated by their maintainers to support other versions than default.
20090218:
AFFECTS: users of www/zend-framework
AUTHOR: glarkin@FreeBSD.org
A local file inclusion (LFI) vulnerability was fixed in Zend Framework
1.7.5. The LFI was present in the Zend_View::render() method, and
allowed inclusion of scripts with relative path names, e.g.
"../../../my/script/dir/myscript.php".
If the script path name is hard-coded into the application and is not
generated by user input, the vulnerability does not apply. Because of
this exception, the Zend Framework team has added a flag to disable
the LFI protection in the render() method.
Full details of the vulnerability, whether it applies to your
application and how to disable the LFI protection in the render()
method can be found here:
http://framework.zend.com/manual/en/zend.view.migration.html
20090216:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.14, which requires a shared library
version bump. Therefore you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
20090209:
AFFECTS: users of multimedia/phonon, x11/kdelibs4, x11/kdebase4*,
deskutils/kdepimlib4, deskutils/kdepim4, devel/automoc4
AUTHOR: kde@FreeBSD.org
KDE4 has been updated from 4.1.4 to 4.2.0. A number of applications
have been moved between packages. The easiest way to avoid various
problems during update is to delete all KDE-4.1.4 ports and install
KDE-4.2.0:
# pkg_delete -f kde\*4.1.4\* automoc4-\*
# portmaster -a (or portupgrade -a)
# cd ${PORTSDIR}/x11/kde4 && make config && make install clean
20090207:
AFFECTS: users of devel/libslang and devel/libslang2
AUTHOR: pgollucci@FreeBSD.org
devel/libslang has been removed in favor of devel/libslang2 after not
being released during last five years. WITH_SLANG2 is no longer a
valid ports KNOB. All ports that depend on devel/libslang should be
recompiled, e.g.:
# portupgrade -o devel/libslang2 devel/libslang
20090130:
AFFECTS: users of www/httptunnel
AUTHOR: rafan@FreeBSD.org
The startup script has been converted to new rc.d style and split
into two scripts: htc (client) and hts (server). Please check the scripts
for how to set variables in /etc/rc.conf.
20090127:
AFFECTS: users of gstreamer-plugins
AUTHOR: kwm@FreeBSD.org
The gstapp library moved from the gstreamer-plugins-bad package to
gstreamer-plugins. It will be necessary to rebuild the gstreamer-plugins
port. After updating your installed ports please do (if you are using
portupgrade):
# portupgrade -f gstreamer-plugins
20090127:
AFFECTS: users of www/xpi-deepestsender
AUTHOR: pgollucci@FreeBSD.org
www/xpi-deepestsender has been updated to version 0.9.0. This version
is *only* for Firefox version 3.x.
20090124:
AFFECTS: users of x11-servers/xorg-server, sysutils/hal
AUTHOR: rnoland@FreeBSD.org
sysutils/hal has been updated and should now properly detect mice for
in X.Org. Use of AllowEmptyInput should no longer be needed for most
users and moused should now work fine.
20090123:
AFFECTS: users of x11-servers/xorg-server
AUTHOR: rnoland@FreeBSD.org
If you are using an older xorg.conf several config lines are no longer
needed and will generate warnings when X is started. RgbPath will cause
X to fail to start, remove it from your config.
Server 1.5.3 also really wants to configure its input devices via hald.
This is causing some issues with moused and /dev/sysmouse. There are
couple of options for how to deal with it:
1. Add Option "AllowEmptyInput" "off" to your ServerLayout section.
This will cause X to use the configured kbd, mouse, and vmmouse
sections from your xorg.conf
2. Don't use moused. If you want it to work with addon USB mice
set this in rc.conf:
moused_enable="NO"
moused_nondefault_enable="NO"
I'm working on fixing hald or the mouse driver or both.
20090123:
AFFECTS: users of x11/libxcb
AUTHOR: flz@FreeBSD.org
Libxcb shared library version was bumped from 1 to 2. You need to
rebuild any consumer of libxcb.so.1 or some applications will be
linked against two versions of libxcb once libX11 is upgraded.
For portupgrade users:
# portupgrade -rf libxcb
20090121:
AFFECTS: users of devel/linux-glib2, emulation/linux_base-f4
AUTHOR: bsam@FreeBSD.org
Glib2 now is incorporated to emulation/linux_base-fc4 (it has always
been a part of more recent Linux base ports). All users should deinstall
devel/linux-glib2 and then deinstall/reinstall emulation/linux_base-f4.
20090119:
AFFECTS: users of mail/claws-mail, mail/claws-mail-smime
AUTHOR: netchild@FreeBSD.org
The claws-mail port includes the S/MIME plugin itself now, it is not
distributed as a separate plugin anymore. It can be enabled with the
GPGME option in the port (disabled by default). If you use the S/MIME
plugin, you should remove the mail/claws-mail-smime port before
enabling GPGME and updating the mail/claws-mail port. People which
already updated mail/claws-mail with GPGME enabled and a non-working
S/MIME plugin need to deinstall mail/claws-mail-smime and reinstall
mail/claws-mail.
20090118:
AFFECTS: users of net-p2p/deluge
AUTHOR: mezz@FreeBSD.org
The Deluge has been updated from 0.5.x to 1.x. The 1.x has been rewritten,
so it is recommend for you to make the back up of your ~/.config/deluge. The
configuration and plugins of 0.5.x do not work in 1.x. Deluge will picking
up the old configuration and try to convert it to the newer format, but I
wouldn't trust it to do it without the back up.
If you prefer to stick with 0.5.x, you can use portmaster:
# portmaster -o net-p2p/deluge05 net-p2p/deluge
or if you use portupgrade:
# portupgrade -o net-p2p/deluge05 net-p2p/deluge
20090118:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
IkiWiki has been upgraded from 2.x to 3.x. Instructions for
migrating existing IkiWiki configurations to 3.x format can be found
at http://ikiwiki.info/tips/upgrade_to_3.0/.
20090118:
AFFECTS: users of devel/apr-svn devel/apr
AUTHOR: pgollucci@FreeBSD.org
devel/apr-svn has been removed and devel/apr now handles its role.
devel/apr now defaults to building with Berkeley database support (bdb)
APR_UTIL_* tunables have been renamed to comply with ports/KNOBS names.
20090114:
AFFECTS: users of x11/kdebase4-workspace, x11/kdebase4-runtime
AUTHOR: kde@FreeBSD.org
KDE4 has been updated from 4.1.1 to 4.1.4. A number of files have been
moved between packages. You should deinstall kdebase4-runtime package
before updating:
pkg_delete -f kdebase-runtime-4.1\*
portmaster -a
After successful update you could install kdebase4-runtime if it has not
been installed during update process.
20090114:
AFFECTS: users of GNOME and GTK+
AUTHOR: gnome@FreeBSD.org
GNOME has been updated to 2.24.x. You have to deinstall a few ports
first before using portupgrade or portmaster in order to successfully
upgrade your GNOME installation. After successful upgrade, you have
to reinstall gnome-session so the gnome.desktop session file is properly
installed.
Portupgrade users:
# pkgdb -Ff
(Answer "yes" to unregister gail while keeping gtk20.)
(Answer "yes" to unregister fast-user-switch-applet while
keeping gdm.)
# pkg_deinstall -fO gtkmm-2.12\*
# portupgrade -aOW
# portupgrade -f gnome-session
Portmaster users:
# pkg_delete -f gtkmm-2.12\*
# portmaster -a
# portmaster gnome-session
20090113:
AFFECTS: users of lang/perl5.8
AUTHOR: skv@FreeBSD.org
lang/perl5.8 has been updated to 5.8.9. You should update everything
that depends on perl. The easiest way to do that is to use
perl-after-upgrade script supplied with lang/perl5.8. Please see its
manual page for details.
20090112:
AFFECTS: users of mail/claws-mail*
AUTHOR: miwi@FreeBSD.org
claws-mail has been updated to 3.7.0, with this update OpenSSL support
has been removed by upstream in favour of GnuTLS. GnuTLS is now enabled
by default. Themes were have also been split to an extra port which
your can find under x11-themes/claws-mail-themes. Menu was rewritten
entirely in version 3.6.0 using modern GTK interface; as a consequence,
all your custom shortcuts will be lost after upgrade.
20090109:
AFFECTS: users of any Mozilla and Opera products
AUTHOR: mezz@FreeBSD.org
The Java plugins now will no longer be picked up by automatically from
these browsers. Because all Java ports share the name of plugins file,
I am thinking about someone or maybe me will need to write something
similar to nspluginwrapper (but in shell script) that can add Java plugin
in ~/.*/plugins/ when user requests one specific version of Java plugin
if this user has more than one version of Java installed. However, for
now, you will have to add Java plugin in ~/.*/plugins/ manually.
20090107:
AFFECTS: users of databases/unixODBC
AUTHOR: beech@FreeBSD.org
The databases/unixODBC port has been updated to 2.2.14. While
containing many bug fixes and minor feature adjustments, this version
no longer ships with the (obsolete) MySQL ODBC driver. MySQL ODBC
driver users will probably want to use databases/mysql-connector-odbc
instead. The text-backed/flatfile driver (libtxtodbc) has also been
removed by the developers but due to some demand may make a return in
a future version or as a separate port.
20090107:
AFFECTS: users of security/libgcrypt
AUTHOR: rafan@FreeBSD.org
libgcrypt has been upgraded to 1.4.3 which has a shared library version
bump. You need to reinstall all ports that depend on it. Use something
like this:
portupgrade -rf libgcrypt
portmaster -r libgcrypt
20090104:
AFFECTS: users of net/openldap24-{client,server}
AUTHOR: delphij@FreeBSD.org
OpenLDAP has been upgraded to 2.4.13, which requires a shared library
version bump. Therefore, you need to reinstall all ports that depend on
it. Please do something like:
# portupgrade -fr net/openldap24-client
20081230:
AFFECTS: users of net/rabbitmq
AUTHOR: pneumann@gmail.com
The database schema has changed between RabbitMQ-1.4.0 and this release.
When the RabbitMQ server detects the presence of an old database, it
moves it to a backup location, creates a fresh, empty database, and
logs a warning.
20081226:
AFFECTS: users of www/rt38
AUTHOR: pgollucci@FreeBSD.org
www/rt38 now respects the FreeBSD directory layout, see hier(7).
With this change, p5-RT-* and p5-RTx-* should be much simpler to use
in the ports collection.
Please note that www/p5-RTx-Shredder is included in www/rt38. This
port will be deprecated and removed.
20081228:
AFFECTS: users of astro/boinc-setiathome-enhanced
AUTHOR: rene@FreeBSD.org
The setiathome client has been updated to version 6.03 and version 5.00
of the astropulse client has been added. Before you update, finish and
report your current workunits to avoid losing them. The port now also
includes the client screensavers.
20081228:
AFFECTS: users of japanese/kinput2
AUTHOR: hrs@FreeBSD.org
The Wnn backend of japanese/kinput2 port now uses unix domain socket
to communicate the server by default. If $JSERVER environment
variable is defined, the value is used as the server host name. In
In short, the server name is determined in the following way:
$JSERVER --(if null)--> CcWnn.Jserver --(if null)--> "localhost"
If the server host name is null or matches "^unix$", unix domain
socket is used. Note that the default server name in CcWnn.Jserver
is "unix" now.
20081226:
AFFECTS: users of www/rt*
AUTHOR: pgollucci@FreeBSD.org
www/rt2 www/rt3 www/rt32 www/rt34 are now deprecated and will expire
2009-02-01. All ports now depend on www/rt38 If you can not update
to www/rt38, www/rt36 is still around.
20081224:
AFFECTS: users of www/phpSysInfo
AUTHOR: miwi@FreeBSD.org
The www/phpSysInfo port has been split into www/phpsysinfo and
www/phpsysinfo-dev ports.
20081217:
AFFECTS: users of mail/policyd2
AUTHOR: wxs@FreeBSD.org
The RC script for mail/policyd2 has been renamed to avoid a conflict.
If you use this port please change the setting in rc.conf to be
policyd2_enable.
20081211:
AFFECTS: users of lang/php5
AUTHOR: pav@FreeBSD.org, itetcu@FreeBSD.org, ale@FreeBSD.org
As of PHP 5.2.7, pcre extension is distributed with the core PHP5 package,
and not as a standalone module anymore. Follow the steps below to update
your installation.
Portupgrade users:
pkg_delete -f php5-pcre-5.2.6
pkgdb -F
portupgrade as usual
Portmaster users:
pkg_delete -f php5-pcre\*
portmaster php5
If you are using pecl ports you might need to force an update on them:
portupgrade -f pecl\*
or
portmaster pecl
If you have the pecl hash, json and/or zip extensions you need to replace
them with the PHP5 bundled ones, e.g.:
portmaster/portupgrade -o archivers/php5-zip archivers/pecl-zip
portmaster/portupgrade -o devel/php5-json devel/pecl-json
portmaster/portupgrade -o security/php5-hash security/pecl-hash
If you build your INDEX locally and you tried to build it after the PHP
update commit, you need to rebuild it _after_ you updated lang/php5:
cd /usr/ports && make index
or (if you use ports-mgmt/p5-FreeBSD-Portindex):
cd /usr/ports && cache-init && portindex -o `make -V INDEXFILE`
20081207:
AFFECTS: users of games/mkgichessclub
AUTHOR: nivit@FreeBSD.org
After the update to the version 2.2.0, please, alter the SQL tables
with the command:
mysql _mkgichessclub_ < /usr/local/share/mkgichessclub/db_migrate_2.1_to_2.2.sql
where _mkgichessclub_ is the database name chosen during the installation
of the port.
20081205:
AFFECTS: users of net-p2p/ktorrent
AUTHOR: makc@FreeBSD.org
ktorrent has been updated to 3.1.5 for KDE 4. The last release of ktorrent
for KDE 3 is available under net-p2p/ktorrent2.
20081121:
AFFECTS: users of comms/smstools3
AUTHOR: mm@FreeBSD.org
The startup script of comms/smstools3 has changed. For increased security
smstools now runs as user uucp / group dialer by default. The script
commands like sendsms etc. should be executed as user uucp.
To restore the old behaviour, set smsd_user="root" and smsd_group="wheel"
in your /etc/rc.conf.
Hint: use security/sudo for running smsd scripts as user uucp.
20081108:
AFFECTS: users of editors/tamago
AUTHOR: hrs@FreeBSD.org
The Wnn backend of editors/tamago port now uses unix domain socket
to communicate the server by default. If $[CJKT]SERVER environment
variable is defined, the value is used as the server host name. In
JSERVER case, for example, the server name is determined in the
following way:
$JSERVER --(if null)--> wnn-jserver --(if null)--> "unix"
If the server host name is null or matches "^unix$", unix domain
socket is used. The path name of the socket can be specified in
wnn-[cjkt]udpath custom variable.
20081105:
AFFECTS: users of french/pluxm-devel
AUTHOR: jadawin@FreeBSD.org
Please, use
http://download.pluxml.org/plugins/migration-blog-beta3x-beta4.zip to
migrate. It's strongly advised to backup your blog before updating.
20081102:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
The location of git-shell has changed to
${PREFIX}/libexec/git-core/git-shell. Please remove the old entry from
/etc/shells.
20081030:
AFFECTS: users of japanese/FreeWnn-server
AUTHOR: hrs@FreeBSD.org
The jserver daemon in japanese/FreeWnn-server port now uses "127.0.0.1"
as the default listen address for security reason. If you need
the wildcard address (INADDR_ANY), you have to explicitly set
"listenaddr" to 0.0.0.0 in ${PREFIX}/lib/wnn/ja_JP/jserverrc or
add "-a 0.0.0.0" to ${wnn_flags} in /etc/rc.conf.
20081026:
AFFECTS: users of www/asterisk-gui
AUTHOR: pneumann@gmail.com
The upgrade to version 2.0 will modify your asterisk dialplan when login
to the page. Hardware autodetection will not work, pending update of
misc/zaptel.
20081028:
AFFECTS: users of www/codeigniter
AUTHOR: glarkin@FreeBSD.org
For certain installations, the following steps should be performed
after the CodeIgniter 1.7.0 upgrade (taken from:
http://codeigniter.com/user_guide/installation/upgrade_170.html).
>>> Update your Session Table
If you are using the Session class in your application, AND if you
are storing session data to a database, you must add a new column
named user_data to your session table. Here is an example of what
this column might look like for MySQL:
user_data text NOT NULL
To add this column you will run a query similar to this:
ALTER TABLE `ci_sessions` ADD `user_data` text NOT NULL
You'll find more information regarding the new Session functionality
in the Session class page:
http://codeigniter.com/user_guide/libraries/sessions.html
>>> Update your Validation Syntax
This is an optional, but recommended step, for people currently
using the Validation class. CI 1.7 introduces a new Form Validation
class (http://codeigniter.com/user_guide/libraries/form_validation.html)
which deprecates the old Validation library. We have left the old one
in place so that existing applications that use it will not break, but
you are encouraged to migrate to the new version as soon as possible.
Please read the user guide carefully as the new library works a little
differently, and has several new features.
20081026:
AFFECTS: users of japanese/sj3-server
AUTHOR: hrs@FreeBSD.org
The sj3serv daemon in japanese/sj3-server port now uses "localhost"
as the default listen address for security reason. If you need
the wildcard address (INADDR_ANY), you have to explicitly set
"servername" to 0.0.0.0 in ${PREFIX}/etc/sj3/serverrc.
20081026:
AFFECTS: users of japanese/Canna and japanese/sj3
AUTHOR: hrs@FreeBSD.org
The japanese/Canna and japanese/sj3 port have been split into
japanese/canna-server and japanese/canna-lib, and japanese/sj3-server
and japanese/sj3-lib, respectively for more fine-grained dependency
management in the Ports Collection.
20080926:
AFFECTS: users of www/squid30
AUTHOR: tmseck@netcologne.de
The Squid developers decided to disable COSS support in 3.0, cf.
the discussion starting here:
http://www.squid-cache.org/mail-archive/squid-dev/200809/0067.html
The corresponding port configuration option WITH_SQUID_COSS is still
available but is a no-op for now. If you currently use COSS storage with
Squid 3.0 you need to disable it in squid.conf.
20080924:
AFFECTS: users of ftp/proftpd
AUTHOR: beech@FreeBSD.org
proftpd now stores its .delay and .scoreboard files in /var/run/proftpd
instead of /var/run. If you are updating an existing installation,
adjust the following in /usr/local/etc/proftpd.conf:
ScoreboardFile /var/run/proftpd/proftpd.scoreboard
Also of note: The third party modules, mod_codeconv, mod_comb, and
mod_sql_tds are not compatible with this release and have been removed.
They will be re-added when the respective authors provide updated versions.
20080909:
AFFECTS: users of security/logcheck
AUTHOR: glarkin@FreeBSD.org
logcheck now stores its configuration files in /usr/local/etc/logcheck
instead of /usr/local/etc. If you are upgrading the port from version
1.1.1 to version 1.2.54, copy the following files to a temporary location,
in case they are removed during the upgrade:
/usr/local/etc/logcheck.hacking
/usr/local/etc/logcheck.ignore
/usr/local/etc/logcheck.violations
/usr/local/etc/logcheck.violations.ignore
e.g.:
cd /usr/local/etc
mkdir /tmp/logcheck.saveconf
cp logcheck.hacking logcheck.ignore logcheck.violations* \
/tmp/logcheck.saveconf
After the upgrade, integrate your local changes to the files listed
above into the new configuration files found in the following directories:
/usr/local/etc/logcheck/cracking.d
/usr/local/etc/logcheck/ignore.d.paranoid
/usr/local/etc/logcheck/ignore.d.server
/usr/local/etc/logcheck/ignore.d.workstation
/usr/local/etc/logcheck/violations.d
/usr/local/etc/logcheck/violations.ignore.d
Please consult the following files for more information about
logcheck rules and reporting levels:
/usr/local/share/doc/logcheck/README.logcheck
/usr/local/share/doc/logcheck/README.logcheck-database
Also note that the upgraded port installs a crontab file for user
"logcheck" that executes the logcheck script every hour and emails
the results to root. If the installation process cannot install
the crontab file, it can be installed manually from
/usr/local/share/examples/logcheck/crontab.in, e.g.:
crontab -u logcheck /usr/local/share/examples/logcheck/crontab.in
20080907:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.13 now. 1.12 version was preserved as
www/mediawiki12 port.
20080902:
AFFECTS: users of net-mgmt/nagios and net-mgmt/nagios-devel
AUTHOR: Jarrod Sayers <jarrod@netleader.com.au>
The stable Nagios port has now been updated to version 3.0.3. Upgrading
to this version shouldn't require any configuration changes, but note that
most sample configuration files were moved into objects/ directory.
Nagios 2.12 is still available as net-mgmt/nagios2, use the following to
remain on this legacy stable branch:
portmaster -o net-mgmt/nagios2 net-mgmt/nagios
or, if you're using portupgrade:
portupgrade -o net-mgmt/nagios2 net-mgmt/nagios
Nagios 3.x development continues in net-mgmt/nagios-devel, users of this
port in production use should consider switching to the stable branch:
portmaster -o net-mgmt/nagios net-mgmt/nagios-devel
or, if you're using portupgrade:
portupgrade -o net-mgmt/nagios net-mgmt/nagios-devel
20080902:
AFFECTS: users of math/ploticus
AUTHOR: linimon@FreeBSD.org
This is a major update.
Deprecated: server-side image maps (use client-side instead); definition
of categories within proc areadef (use proc categories instead); proc print.
Discontinued attributes: proc processdata's stack; proc usedata's element,
proc getdata's rotate, and proc defineunits (use the $changeunits()
function instead).
proc rangebar has been renamed proc boxplot and there are major
functionality changes. Any script that uses proc rangebar will need
maintenance.
See http://ploticus.sourceforge.net/doc/news.html for more information.
20080901:
AFFECTS: users of mail/pine4 and editors/pico
AUTHOR: dougb@FreeBSD.org
These two ports have been removed in favor of the new mail/alpine and
editors/pico-alpine ports. UW discontinued work on Pine in September
2005 and is focusing on Alpine now. You should be able to directly
replace pine with alpine.
See http://www.washington.edu/alpine/ for more information.
20080831:
AFFECTS: users of net-mgmt/smokeping
AUTHOR: lth@FreeBSD.org
Smokeping has been updated to 2.4.1, and the example web server
configuration has changed. Please read pkg-message and check that
your server configuration is OK.
20080827:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
With the default Makefile settings, most of the programs are now
installed outside your $PATH, except for "git", "gitk", and some server
side programs that need to be accessible for technical reasons. Invoking
a git subcommand as "git-xyzzy" from the command line has been deprecated
since early 2006 (and officially announced in 1.5.4 release notes); use
of them from your scripts after adding output from "git --exec-path" to
the $PATH is still supported in this release, but users are again
strongly encouraged to adjust their scripts to use "git xyzzy" form, as
we will stop installing "git-xyzzy" hardlinks for built-in commands in
later releases.
Please see this URL for more information:
http://www.kernel.org/pub/software/scm/git/docs/RelNotes-1.6.0.txt
20080827:
AFFECTS: users of mail/qmhandle
AUTHOR: garga@FreeBSD.org
A qmHandle.conf file was created, for now, is not needed to edit
${PREFIX}/bin/qmHandle to change stopqmail and startqmail variables.
Just remember to edit configuration file after upgrade.
20080820:
AFFECTS: users of www/p5-Apache-DBI
AUTHOR: pgollucci@FreeBSD.org
www/p5-Apache-DBI has been forked into a MASTER and SLAVE setup
www/p5-Apache-DBI-mp1 and www/p5-Apache-DBI-mp2 so as to work with
www/rt38 among possibly other ports.
20080820:
AFFECTS: users of net/rabbitmq
AUTHOR: pneumann@gmail.com
The database schema has changed in this version of RabbitMQ. If you
attempt to start RabbitMQ-1.4.0 over top of a previous installation,
it will fail, citing "schema_integrity_check_failed". To correct this,
delete your mnesia directory (/var/db/rabbitmq/mnesia) and restart
the server. Note that this will destroy all your durable exchanges and
queues, and all your persisted messages!
20080816:
AFFECTS: users of mail/assp
AUTHOR: J.R. Oldroyd <fbsd@opal.com>
The periodic(8) script no longer outputs to files in the assp directory.
You should remove /var/db/assp/nightly.log and nightly.log.old by hand
once you are done with them. The information that was stored there will
now come in your nightly system email.
20080815:
AFFECTS: users of sysutils/rdiff-backup
AUTHOR: vd@FreeBSD.org
sysutils/rdiff-backup has been upgraded from 1.0.5 to 1.2.0. This is
an incompatible upgrade. If you need the "old" 1.0.5, you can find it
in sysutils/rdiff-backup10.
20080813:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
The layout of the ikiwiki.setup file has changed in a significant
way in this release. Old setup files will continue to work, but new
features, like the new websetup interface, require a new format
setup file. You can convert old setup files into the new format by
running the following command for all your ikiwiki.setup files:
ikiwiki-transition setupformat ikiwiki.setup
20080812:
AFFECTS: users of mail/spamdyke
AUTHOR: mm@FreeBSD.org
The spamdyke port has been updated to 4.0.2. The new version is not
backwards compatible with previous versions. Please examine the new
configuration file for the changes.
20080812:
AFFECTS: users of databases/pgbouncer
AUTHOR: mm@FreeBSD.org
Starting with port version 1.2.3, pgbouncer does not run as root anymore.
If you are upgrading from earlier versions, please update your configuration
in ${PREFIX}/etc/pgbouncer.ini to use log and pid file paths owned by the
newly created pgbouncer user (or customize for a different user yourself).
Default logfile: /var/log/pgbouncer/pgbouncer.log
Default pidfile: /var/run/pgbouncer/pgbouncer.pid
20080808:
AFFECTS: users of chinese/phpbb-tw
AUTHOR: chinsan@FreeBSD.org
The default install directory for phpbb-tw has changed from
${PREFIX}/www/data/phpBB2 to ${PREFIX}/www/phpBB2.
If you are updating from a previous version, to preserve your settings
and data, please do the following:
mv /usr/local/www/data/phpBB2 /usr/local/www
Then update as usual.
20080806:
AFFECTS: users of net-p2p/transmission
AUTHOR: mezz@FreeBSD.org
Update to 1.3x, the net-p2p/transmission now is a meta-port. It depends on
cli, daemon, and gtk2. If you don't want that, uninstall transmission and
install net-p2p/transmission-cli by doing:
portmaster -o net-p2p/transmission-cli net-p2p/transmission
or, if you're using portupgrade:
portupgrade -o net-p2p/transmission-cli net-p2p/transmission
20080805:
AFFECTS: users of devel/qt4
AUTHOR: kde@FreeBSD.org
The qt4 ports has been updated to 4.4.1. With this update several ports
specific problems have been fixed. Qt4 headers and libraries have been
moved to include/qt4 and lib/qt4. bsd.qt.mk defines QT_INCDIR and
QT_LIBDIR now, which could be used in qt4-dependent ports if required.
Before you start to update your ports, please force update of qmake4 and
qt4-corelib ports. Portmaster users can do:
portmaster devel/qmake4 devel/qt4-moc devel/qt4-corelib
or, if you're using portupgrade:
portupgrade -f devel/qmake4 devel/qt4-moc devel/qt4-corelib
20080804:
AFFECTS: users of devel/git
AUTHOR: wxs@FreeBSD.org
Git's cvsps dependency has been switched from cvsps-devel to cvsps. The
two are incompatible, so you will need to do the following before
upgrading git:
portmaster -o devel/cvsps devel/cvsps-devel
20080728:
AFFECTS: users of net/freeradius2
AUTHOR: David Wood <david@wood2.org.uk>
Upgrading the FreeRADIUS port used to replace all unmodified files
in your configuration with the latest version from the sample
configuration. This strategy has two disadvantages; over time your
configuration became based on different versions of the sample
configuration, also major changes to the sample configuration could
leave your configuration in a confusing state.
From version 2.0.5, your configuration is not touched if any
configuration files have been modified.
You are recommended to track changes in the sample configuration and
keep your configuration in a version control system. I use Subversion
(see the devel/subversion port) to track my changes. Keeping the sample
configuration in a 'vendor branch' (see the Subversion book for more
details) allows easy merging of changes from the sample configuration.
*** IMPORTANT ***
You are urged to move your configuration out of the default location
(/usr/local/etc/raddb) before upgrading from 2.0.4 (or earlier)
to 2.0.5 (or later). Once this upgrade is complete, remove the sample
configuration that has been installed in the default location and
move your configuration back to the default location.
This is a one time procedure that will prevent unmodified files in
your configuration from being deleted from your configuration and not
restored during the upgrade. No customised files will be lost in any
circumstances.
The sample configuration in 2.0.5 has been reorganised: the
configuration of most modules is now in the modules directory rather
than in radiusd.conf. You are urged to rearrange your configuration
to match this layout.
There are several improvements in this version of the port, including
a new pkg-message that will help new FreeRADIUS users to get started
with the port, also new 'reload' and 'debug' commands for the rc.d
script. Enjoy!
20080725:
AFFECTS: users of x11-fm/nautilus and misc/shared-mime-info
AUTHOR: gnome@FreeBSD.org
In order to properly update x11-fm/nautilus and misc/shared-mime-info, do
the following using portupgrade:
# pkg_deinstall -fO nautilus
# portupgrade shared-mime-info
# portinstall -O nautilus
Once misc/shared-mime-info has been updated, each user will need to run
the following command:
$ update-mime-database ~/.local/share/mime/
20080725:
AFFECTS: users of www/ojs2
AUTHOR: Greg Larkin <glarkin@FreeBSD.org>
If you are upgrading from a prior version of ojs2, please backup your
database, uploaded files directory, and your config.inc.php before the
upgrade. Read /usr/local/share/docs/ojs2/UPGRADE or visit
http://pkp.sfu.ca/ojs/UPGRADE for additional upgrade information.
20080721:
AFFECTS: users of net/freenet6
AUTHOR: Edwin Groothuis <edwin@mavetju.org>
Please note that there has been a major update of this port (from
version 2.x to 5.x) and that the name of the binaries and configuration
files has changed from "tpsc" to "gw6c". The configuration files
have to be copied from ${PREFIX}/share/examples/freenet6 to
${PREFIX}/etc again.
20080719:
AFFECTS: users of x11-fm/gprename
AUTHOR: Martin Tournoij <carpetsmoker@rwxrwxrwx.net>
GPRename configuration files now live ~/.config/gprename instead of ~/, to
upgrade use the following commands:
% mkdir -p ~/.config/gprename
% mv ~/.gprename ~/.config/gprename/gprename
% mv ~/.gprename_log ~/.config/gprename/gprename_log
20080717:
AFFECTS: users of devel/anjuta
AUTHOR: gnome@FreeBSD.org
Anjuta's neon dependency has been switched from neon26 to neon28. The
two are incompatible, so you will need to do the following to upgrade:
portupgrade -o www/neon28 neon26
portupgrade anjuta
20080714:
AFFECTS: users of www/squid
AUTHOR: Thomas-Martin Seck <tmseck@web.de>
www/squid has been updated to Squid 2.7.STABLE3.
The update should be rather straightforward.
The only noticeable change in the port is that the ICAP patch is no
longer included; this is because this patch was unmaintained for a long
time and its use was not really recommended. Please consider moving to
Squid-3 (currently available as www/squid30) if you need ICAP support.
Squid 2.6 is still available as www/squid26 and will probably be removed
from the Ports Tree by the end of 2008.
20080712:
AFFECTS: users of databases/rrdtool
AUTHOR: rafan@FreeBSD.org
If you use language bindings, like the Perl's RRDs, please upgrade
this port *twice* in order to get the library dependency right.
20080711:
AFFECTS: users of x11-toolkits/gtkdatabox2
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
The port has been deprecated and gtkdatabox has been updated. This was
done so the port tracks vendor name. Please update by doing:
portupgrade -o x11-toolkits/gtkdatabox x11-toolkits/gtkdatabox2
20080709:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
The IkiWiki editpage form now uses the raw page name, not the page title,
in its `page' CGI parameter. You will need to rebuild any existing
IkiWiki installations in order to update their `edit' links to the new
format.
20080708:
AFFECTS: users of emulators/qemu-devel
AUTHOR: nox@FreeBSD.org
The port has been updated to a 20080620 SVN snapshot, which uses the
new (incompatible) kqemu-kmod-devel port that now also works for the
32 bit "qemu" executable on amd64. If you upgrade qemu-devel with the
KQEMU knob on, you have to
# pkg_delete kqemu-kmod-1\*
the old kqemu version first if it is installed.
20080705:
AFFECTS: users of www/ikiwiki
AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org>
The IkiWiki search plug-in now uses www/xapian-omega as backend instead
of textproc/hyperestraier. You will need to update the configuration of
any search enabled IkiWiki installations and rebuild them since the
search form has changed.
20080704:
AFFECTS: users of misc/shared-mime-info
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
The misc/shared-mime-info has been updated to 0.40. The Mime Types caches
have been changed a bit. If you have created any custom MIME types, you
will need to run update-mime-database to update your local Mime Types
caches:
$ update-mime-database ~/.local/share/mime/
20080702:
AFFECTS: users of irc/ratbox-services
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
Configuration file and database changes have been made between the
1.1.x series and the current release version of ratbox-services.
It is highly recommended that services are stopped, and the proper
upgrade procedure is followed as described in port's documentation,
before restarting newly updated ratbox-services again.
Please remember to backup the database before attempting an
upgrade, as incorrectly upgraded database may be rendered unusable.
The ratbox-services-1.2.x branch implements multi-language support.
However, an inconsistency in the language indexing may result in
errors. It is therefore recommended that the English default to be
used until the next version release.
20080702:
AFFECTS: users of mail/nocc
AUTHOR: Alex Dupre <ale@FreeBSD.org>
The Nocc configuration file has been moved into 'config' subdir.
When updating, remove the old conf.php file and reconfigure Nocc.
20080701:
AFFECTS: users of devel/subversion*
AUTHOR: Lev Serebryakov <lev@FreeBSD.org>
subversion now uses neon-0.28.x (www/neon28) port, and automatic
portupgrade will fail because www/neon28 will conflict with installed
www/neon26 port.
You should upgrade neon library before subversion with the command:
# portupgrade -o www/neon28 neon26
Also, if you use any special subversion ports with bindings, you
should upgrade these ports to clean subversion port with
# portupgrade -o devel/subversion subversion-\*
and install needed bindings (p5-subversion, py-subversion and/or
ruby-subversion) after that.
If you use subversion with bindings installed from devel/subversion
with custom options, don't forget to install separate bindings ports
after subversion upgrade.
20080630:
AFFECTS: users of graphics/cairo, graphics/poppler*, and future users of www/firefox3
AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org>
The poppler* ports have been updated to 0.8.3 and the shared libraries
have changed. Firefox 3.0 has been added to the tree as www/firefox3.
These changes require that all dependent ports be updated. You can do
this in one of two ways:
# portmaster pixman
# portmaster \*cairo\*
# portmaster -r poppler-0
or:
# pkgdb -Ff
# portupgrade pixman\* \*cairo\*
# portupgrade -r poppler-0.\*
20080627:
AFFECTS: users of x11-drivers/xf86-video-ati
AUTHOR: Jung-uk Kim <jkim@FreeBSD.org>
mach64 and r128 drivers are now separated out from the ati driver.
These video cards are supported by x11-drivers/xf86-video-mach64
and x11-drivers/xf86-video-r128 respectively. If you have one of
the affected video cards and xorg.conf contains the following line:
Driver "ati"
you must specify "mach64" or "r128". Alternatively, you may install
x11-drivers/xf86-video-ati to get a wrapper driver.
20080626:
AFFECTS: users of science/gramps
AUTHOR: Anders Troback <freebsd@troback.com>
Before you upgrade from 2.x to 3.x you need to export your existing
databases to a GRAMPS XML file. After the upgrade you can import
them into the new version.
20080624:
AFFECTS: users of irc/ircd-ratbox-devel
AUTHOR: Beech Rintoul <beech@FreeBSD.org>
Upgrading between different beta releases can cause problems when
changes to the ban database schema have occurred. The 'bantool'
utility now comes with a -u switch that will check and update the
ban database as necessary.
Issuing 'bantool -u' is required when upgrading between beta releases
and must not be done while the ircd is running.
20080624:
AFFECTS: users of www/mod_security
AUTHOR: Marcelo Araujo <araujo@FreeBSD.org>
The mod_security port has been updated from 1.9.4 to 2.5.5. Branch 1.9.x
will not receive any further updates; all users must update mod_security
port to versions 2.1 or 2.5.
You can get more information about update issues at:
http://www.modsecurity.org/documentation/
20080624:
AFFECTS: users of www/opera and www/opera/devel
AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org>
The Opera port has been updated from 9.2x to 9.5x. A lot of things have
been changed such as keyboard shortcuts[1]; new storage and indexing
formats for mail and feeds; new search.ini; native amd64 binaries; no 4.x
support. You will be asked whether to convert mail and feeds to new
format during start up. Warning: there is no way to downgrade back to
the old format. Be sure to see the Changelog[2].
[1] http://www.opera.com/support/search/view/884/
[2] http://www.opera.com/docs/changelogs/freebsd/950/
20080622:
AFFECTS: users of devel/subversion, subversion-devel and subversion-freebsd
with apr from www/apache22
AUTHOR: Clement Laforet <clement@FreeBSD.org>
apr and apr-util bundled with apache 2.2.9 have been upgraded to 1.3.x, so
shared libraries versions have been bumped. If you are using subversion
with apache22 apr, you must rebuild subversion after the update.
20080617:
AFFECTS: users of editors/nvi-devel
AUTHOR: Wesley Shields <wxs@FreeBSD.org>
editors/nvi-devel has been changed to install nvi, nex, and nview as
to not conflict with editors/2bsd-vi. Please note the new names if
you use this port.
20080616:
AFFECTS: users of mail/dkim-milter
AUTHOR: Hirohisa Yamaguchi <umq@ueo.co.jp>
Most of the command line options can now be set in configure files.
So the default values (such as milterdkim_socket) are changed to blank.
Upgrading users should check the values both in rc.conf and
dkim-filter.conf.
20080612:
AFFECTS: users of www/linux-opera
AUTHOR: mezz@FreeBSD.org
The Opera port has been updated from 9.2x to 9.5x. A lot of things have
been changed such as keyboard shortcuts[1]; new storage and indexing
formats for mail and feeds; new search.ini; probably more that I have
missed. I do not know if the keyboard shortcuts and search.ini will be
overwritten. You will be asked whether you want mail and feeds to be
converted to new format during start up. Warning: there is no way to
downgrade back to the old format. Be sure to see the Changelog[2].
[1] http://www.opera.com/support/search/view/884/
[2] http://www.opera.com/docs/changelogs/linux/950/
It is probably best for you to back up your linux-opera directory in
case until you have no problem with new Opera for a while. Also, you
might have to re-configure search and keyboard shortcuts if these were
overwritten:
# cp -Rp ~/.linux-opera ~/.linux-opera-bak
If you are seeing an error of undefined symbols related to GTK+, it is
because it needs newer linux-gtk2 that ports doesn't have. You can enter
'opera:config#FileSelector|DialogToolkit' in the address bar and change
from 0 to 1 in 'Dialog Toolkit' if it annoys you. 0 = auto detection,
1 = QT, and 2 = GTK+.
20080610:
AFFECTS: users of mail/svnmailer
AUTHOR: pgollucci@FreeBSD.org
Some of the config directives and sections allowed have changed. You will
have to edit your config file when updating to 1.1.0-dev-r1373 version of
the port. Please see the following URL for more information:
http://opensource.perlig.de/en/svnmailer/doc-1.1/#general-config-charset
20080609:
AFFECTS: users of devel/pear-Date_Holidays
AUTHOR: tabthorpe@FreeBSD.org
pear-Date_Holidays has been split into multiple subports. If you want
a specific geographic region, look at devel/pear-Date_Holidays_*
20080605:
AFFECTS: users of audio/paman and audio/pavucontrol
AUTHOR: lippe@FreeBSD.org
paman was renamed to pavucontrol, which are two different projects.
paman is a GTK frontend to PulseAudio, while pavucontrol is a GTK-based
volume control tool to PulseAudio.
20080605:
AFFECTS: users of devel/gettext (i.e.: YOU)
AUTHOR: ade@FreeBSD.org
As a result of the upgrade to gettext-0.17, the shared library version
of libintl has changed, so you will need to rebuild all ports that
depend on gettext:
# portupgrade -rf gettext
# portmaster -r gettext
Given the scope and sheer number of dependent ports, it may be more
advisable to simply blow away all existing install ports (after
keeping any local configuration changes), and rebuilding from scratch.
20080603:
AFFECTS: users of editors/emacs
AUTHOR: Yasuhiro KIMURA <yasu@utahime.org>
The port (editors/emacs) is updated to 22.2 and some of Emacs Lisp
directories had changed. So you should reinstall all ports that depend
on it. Please do something like:
# portupgrade -fr emacs
20080601:
AFFECTS: users of www/ikiwiki
AUTHOR: brix@FreeBSD.org
If password based logins is enabled in IkiWiki, those passwords were
stored in cleartext in the userdb. To guard against exposing users'
passwords, IkiWiki 2.48 and later use strong (blowfish) hashes for
storing passwords.
To hash existing passwords, update to ikiwiki-2.48 and run the
following command for each of your IkiWiki src dirs:
ikiwiki-transition hashpassword /path/to/your/wiki/srcdir
20080524:
AFFECTS: users of net-im/jabberd
AUTHOR: mm@FreeBSD.org
Starting with version 2.2.0, resolver is now built in the S2S component.
Jabberd configuration files require updating:
jabberd.cfg: resolver component must be removed
s2s.xml: <lookup> section must be added (see s2s.xml.dist)
resolver.xml: may be deleted (file not required anymore)
20080519:
AFFECTS: users of www/nginx and www/nginx-devel
AUTHOR: osa@FreeBSD.org
Nginx version lines have been changed: 0.5 -> 0.6 for stable and
0.6 -> 0.7 for development version. Make sure your configuration
files are compatible with the new version(s).
20080519:
AFFECTS: users of irc/bitlbee
AUTHOR: brix@FreeBSD.org
The default installation is now configured for running bitlbee as
user 'bitlbee'. Make sure any existing configuration files are
readable by that user.
20080517:
AFFECTS: users of multimedia/smplayer-*
AUTHOR: miwi@FreeBSD.org
The slave port multimedia/smplayer-qt4 has been removed with the upgrade
of multimedia/smplayer to 0.6.0, qt3 is no longer supported. They are now
fully integrated into multimedia/smplayer.
Please uninstall multimedia/smplayer-qt4 port before upgrading
multimedia/smplayer to version 0.6.0 or higher.
20080513:
AFFECTS: users of security/amavisd-new
AUTHOR: scheidell@secnap.net
Amavisd-new 2.6.0 introduces several incompatibilities with prior versions.
If you are upgrading from 2.5.4 or earlier, you will need to update your
SQL schema. If you have third party programs that access SQL tables, you
will need to update those also.
COMPATIBILITY WITH 2.5.4:
- when using SQL for logging (e.g. for a pen pals feature) or for
quarantining, SQL tables maddr, msgs, msgrcpt and quarantine need
to be extended by a new field 'partition_tag'; see below for details;
- when SQL logging (pen pals) or SQL lookups are used, one can choose a
binary or a character data type for fields users.email, mailaddr.email,
and maddr.email; now may be a good opportunity to change a data type
to binary (string of bytes); see below for details;
- when using SQL for logging, a default for $sql_clause{'upd_msg'}
has changed, so if a configuration file replaces this SQL clause
by a non-default setting, it needs to be updated;
Full information in /usr/local/share/doc/amavisd-new/RELEASE_NOTES.
20080513:
AFFECTS: users of audio/ampache
AUTHOR: jadawin@FreeBSD.org
Ampache 3.4 uses a different config parser. Unfortunately the new parser
is unable to read old config files. In order to migrate your current
configuration, you should run `php ${WWWDIR}/bin/migrate_config.inc' from
the command line.
20080508:
AFFECTS: users of databases/ptop
AUTHOR: beech@FreeBSD.org
The authors have changed the name of this utility to `pg_top'. To avoid
conflict with another port in the Tree with the same name we have retained
`ptop' as the portname. Note that binary has also changed to `pg_top'.
Please start the utility with that name after updating.
20080507:
AFFECTS: Perl interface users of audio/gramofile
AUTHOR: rafan@FreeBSD.org
Perl support is removed due to devel/swig11 removal in ports. If you use
the Perl interface, you are encouraged to use the new Audio::Gramofile
found on CPAN (contact me for the ports).
20080506:
AFFECTS: users of net-mgmt/collectd
AUTHOR: daniel@roe.ch
Previously, net-mgmt/collectd used to remove the config file even if it
was changed by the user. This has now been fixed.
To upgrade without losing your configuration, copy
${PREFIX}/etc/collectd.conf away to a safe place before upgrading
net-mgmt/collectd.
In addition, the default location of the data files changed from
${PREFIX}/var/lib/collectd to /var/db/collectd; you may want to move your
data files and edit your configuration accordingly.
20080503:
AFFECTS: users of net/skype-devel
AUTHOR: beech@FreeBSD.org
Skype-devel port has been removed in favor and by upading of net/skype.
If you are running skype-devel, please do the following:
portupgrade -o net/skype net/skype-devel
20080426:
AFFECTS: users of www/phpgedview
AUTHOR: beech@FreeBSD.org
The install location of phpgedview has changed from www/data/phpGedView to
www/phpgedview. If you are updating from a previous version please do
the following:
mv /usr/local/www/data/phpGedView /usr/local/www
You will also need to adjust the paths in your web server to reflect the
new location.
20080416:
AFFECTS: users of security/clamav
AUTHOR: garga@FreeBSD.org
Clamav 0.93 does not support the daily.inc and main.inc directories format
for virus databases. You need to remove these directories manually and
force freshclam to get new cvd format files before starting clamd:
portupgrade clamav
/usr/local/etc/rc.d/clamav-clamd stop
/usr/local/etc/rc.d/clamav-freshclam stop
rm -rf /var/db/clamav/main.inc /var/db/clamav/daily.inc
freshclam
/usr/local/etc/rc.d/clamav-freshclam start
/usr/local/etc/rc.d/clamav-clamd start
20080408:
AFFECTS: users of www/p5-Apache-Test
AUTHOR: pgollucci@FreeBSD.org
www/p5-Apache-Test doesn't actually need www/mod_perl{1,2}. If you would
like to test a mod_perl, than please install www/mod_perl2 or www/mod_perl
as well. The ports infrastructure doesn't support this (yet) but you can
use it to test www/apache13, www/apache20, and/or www/apache22 without
chaining www/p5-Apache-Test.
20080405:
AFFECTS: users of sysutils/tracker
AUTHOR: ahze@FreeBSD.org
The sysutils/tracker port is now a meta port and tracker is now split into
separate ports to allow non-GNOME users to install tracker without pulling
in GNOME components. To upgrade please use the directions below.
Portmaster users:
portmaster -o sysutils/tracker-client tracker
portmaster sysutils/tracker
Portupgrade users:
portupgrade -o sysutils/tracker-client tracker
portupgrade -u sysutils/tracker
20080405:
AFFECTS: users and maintainers of ports that depend on databases/sqlite3
AUTHOR: mnag@FreeBSD.org
Port databases/sqlite3 was updated to 3.5.6 and now has threads enabled
by default. If you encounter any problem with it, you can rebuild SQLite3
without threads and test or change Makefile of affected port with this:
sed -i.bak -E -e "s|USE_SQLITE=.*|USE_SQLITE=34|g" \
-e "s|databases/sqlite3|databases/sqlite34|g" Makefile
Please report success or failure to port maintainer and to me.
20080403:
AFFECTS: users of emulators/qemu and emulators/qemu-devel
AUTHOR: nox@FreeBSD.org
The default configuration location (qemu-ifup script etc.) has been
changed from /etc to ${PREFIX}/etc (usually /usr/local/etc). Move your
files accordingly.
20080330:
AFFECTS: users of www/mediawiki
AUTHOR: miwi@FreeBSD.org
www/mediawiki version is 1.12 now. 1.11 version was preserved on
www/mediawiki111 port.
20080329:
AFFECTS: users of www/phpadsnew
AUTHOR: beech@FreeBSD.org
Phpadsnew has been replaced with www/openx.
To upgrade please do the following:
1. Install www/openx
2. Copy the configuration file from phpadsnew to the var directory of
www/openx
3. Copy your banner images from phpadsnew/www/images to openx/www/images
4. Access openx on your browser and follow the instructions for upgrading
5. When you are satisfied with everything working properly you can remove
www/phpadsnew
20080326:
AFFECTS: users of emulators/linux_base-f8
AUTHOR: bsam@FreeBSD.org
The new port is used just like emulators/linux_base-fc6. Please, read
carefully entry 20070327 about emulators/linux_base-fc6.
20080323:
AFFECTS: users of multimedia/gstreamer
AUTHOR: multimedia@FreeBSD.org
Gstreamer port was updated. Due to the move of some plugins between
ports, you will have to rebuild the gstreamer-plugins-good port after
upgrading.
Portupgrade users:
# portupgrade -a
# portupgrade -f gstreamer-plugins-good
Portmaster users:
# portmaster -a
# portmaster gstreamer-plugins-good
20080323:
AFFECTS: all GNOME users and ports depend on misc/gnomehier
AUTHOR: gnome@FreeBSD.org
GNOME has been updated to 2.22.0. You have to deinstall a few ports first
before using portupgrade or portmaster in order to successfully upgrade
your GNOME installation.
Portupgrade users:
# pkgdb -Ff
# pkg_deinstall -fO gnome-applets\* totem\* gnome-control-center\*
# portupgrade -aOW
Portmaster users:
# pkg_delete -f gnome-applets\* totem\* gnome-control-center\* \
gnome-keyring-manager\*
# portmaster -a
Be sure to read in our known issues and solutions:
http://www.freebsd.org/gnome/docs/faq222.html#q4
20080323:
AFFECTS: users of devel/glib20 and future users of devel/gio-fam-backend
AUTHOR: gnome@FreeBSD.org
In order to update to glib 2.16 or higher, you must first update the
glib20 port on its own or you will get a failure trying to install
devel/gio-fam-backend saying it cannot find -lgio-2.0. Portmaster users
can do:
portmaster glib-2
or, if you're using portupgrade:
portupgrade glib-2\*
20080318:
AFFECTS: users of audio/gnump3d
AUTHOR: jadawin@FreeBSD.org
The layout of gnump3d 3.0 is changed, please read documentation and the
manual pages of gnump3d.
20080318:
AFFECTS: users of net/skype net/skype-devel
AUTHOR: beech@FreeBSD.org
For FreeBSD versions 7.0 and above:
It is required with both skype and skype-devel to update to linux_base-fc6.
Please do the following:
1. Make sure there are no running Linux applications.
2. Unmount linprocfs (umount /compat/linux/proc)
3. Uninstall your current linux_base port
4. Set appropriate sysctl (sysctl compat.linux.osrelease=2.6.16)
5. Install emulators/linux_base-fc6
6 Remount linprocfs (mount /compat/linux/proc)
7. Add compat.linux.osrelease=2.6.16 to etc/sysctl.conf
8. Add OVERRIDE_LINUX_BASE_PORT=fc6 to /etc/make.conf
Note: These instructions also apply to linux_base-f8, please use the same
osrelease.
For FreeBSD versions 5.X and 6.X:
Please use the legacy version net/skype12:
portupgrade -o net/skype12 net/skype
20080316:
AFFECTS: users of net/iscsi-target
AUTHOR: rafan@FreeBSD.org
The default configuration location has been changed from /etc to
${PREFIX}/etc. Move your files accordingly.
20080314:
AFFECTS: users of security/nmapfe
AUTHOR: miwi@FreeBSD.org
nmapfe has been renamed to zenmap upstream. The port has also been
renamed. If you haven't already installed nmapfe, you need to:
portupgrade -o security/zenmap nmapfe\*
20080313:
AFFECTS: users of mail/ezmlm-web
AUTHOR: hans@nordhaug.priv.no
The layout of ezmlm-web 3.2 is changed, please read documentation and
the manual page of ezmlm-web.cgi.
20080312:
AFFECTS: users of x11-wm/enlightenment-devel, x11/ecore and grephics/evas
AUTHOR: stas@FreeBSD.org
Evas and ecore ports have been split to separate modules to simplify
dependency tracking. Thus, portupgrade in many cases won't be able to
correctly update these ports.
The easiest upgrade path would be to remove all EFL ports and install
them from scratch. At least, you should reinstall ecore and evas.
Please note that your old $HOME/.e is no longer compatible with new
snapshot version. You will need to remove this directory and let e17
create it automatically on the next startup.
20080306:
AFFECTS: users of mail/dovecot
AUTHOR: ehaupt@FreeBSD.org
The update to version 1.0.12 will require manual change to the active
configuration file.
mail_extra_groups setting was commonly used insecurely. This setting is now
deprecated. Most users should switch to using mail_privileged_group setting,
but if you really need the old functionality use mail_access_groups instead.
20080303:
AFFECTS: users of security/gnutls and any port that depends on it
AUTHOR: novel@FreeBSD.org
gnutls has been updated to 2.2.2 and all shared libraries versions have
been bumped. So you need to rebuild all applications that depend on
gnutls. Do something like:
portupgrade -rf gnutls
20080223:
AFFECTS: users of www/instiki
AUTHOR: beech@FreeBSD.org
The default installation directory for instiki has changed from
/usr/local/instiki to /usr/local/share/instiki.
If you are updating from a previous version, to preserve your
settings and data, please do the following:
mv /usr/local/instiki /usr/local/share
Then update as usual.
20080219:
AFFECTS: users of x11-wm/xmonad
AUTHOR: jacula@gmail.com
From now XMonad uses a new configuration file system, so you don't have
to edit Config.hs anymore. Instead, create a custom configuration file
~/.xmonad/xmonad.hs. You can take a look at some samples on Xmonad's
website. Note that you can be interested in x11-wm/xmonad-contrib.
20080218:
AFFECTS: users of devel/poco and devel/poco-ssl
AUTHOR: lippemail@gmail.com
The HashFunction class template has been changed in an incompatible way.
The member function formerly named hash() is now the function call
operator. If you have defined your own HashFunction classes, then you
have to update your code.
20080216:
AFFECTS: users of sysutils/symon
AUTHOR: uspoerlein@gmail.com
The symon port has been updated from 2.75 to 2.78. It changes the wire
protocol again. You should update your symux(8) and symon(8) installations
simultaneously, as:
- new symon clients will make old symux servers exit, and
- new symux servers don't understand the old symon client's if() and
mem() probes.
20080208:
AFFECTS: users of ports-mgmt/portupgrade
AUTHOR: sem@FreeBSD.org
As was claimed in the entry 20070301 below in this file, you should fill
ALT_DEPENDS section of pkgtools.conf for portupgrade to work correctly
with your alternative dependencies. Now it is an obligatory requirement.
It was done as a compromise between speed and complexity.
20080203:
AFFECTS: users of www/xshttpd
AUTHOR: johans@FreeBSD.org
www/xshttpd now uses ${PREFIX}/www/xshttpd/ as a root directory for its
data files. The xshttpd configuration files have been moved to
${PREFIX}/www/xshttpd/conf/. Please move the appropriate local files
manually if you are upgrading from 3.4 or older versions.
20080202:
AFFECTS: users of www/punbb
AUTHOR: beech@FreeBSD.org
Install paths have changed. Please do the following prior to upgrade:
cd /usr/local/www
mv punbb punbb.old
cp -R punbb.old/upload punbb
It is now safe to update as usual.
Notes:
* You will probably get uninstall errors regarding files not found. It's
safe to ignore them
* Your webserver path has changed from www/punbb/upload to www/punbb,
please adjust your webserver configuration and restart it
* When you are satisfied with everything working properly you may remove
the punbb.old directory:
rm -r /usr/local/www/punbb.old
20080201:
AFFECTS: users of www/ziproxy
AUTHOR: pankov_p@mail.ru
The configuration file was moved from /usr/local/etc to
/usr/local/etc/ziproxy.
20080126:
AFFECTS: users of net-p2p/deluge
AUTHOR: mezz@FreeBSD.org
Deluge was updated to version 0.5.8.2. If you are using blocklist plugin,
you have to remove blocklist.conf first before you can run it, or it will
crash upon start up.
$ rm -f ~/.config/deluge/blocklist.conf
20080125:
AFFECTS: users of www/mod_security2
AUTHOR: araujo@FreeBSD.org
Update of mod_security2 is a dramatic change, because there is a need
to completely rewrite their obsolete rules and migrate for capacity to
use new syntax.
You are advised to make a complete backup of your configuration files
before you can perform an update.
20080120:
AFFECTS: users of www/apache20
AUTHOR: clement@FreeBSD.org
BDB framework provided by bsd.database.mk is now used by www/apache20
port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details ('make
show-options').
20080120:
AFFECTS: users of www/apache22
AUTHOR: clement@FreeBSD.org
BDB framework provided by bsd.database.mk is now used by www/apache22
port. WITH_BERKELEYDB knob is deprecated in favor of WITH_BDB and
WITH_BDB_VER/WITH_BDB_BASE, see documentation for more details.
('make show-options').
20080118:
AFFECTS: users of net/freeradius
AUTHOR: David Wood <david@wood2.org.uk>
FreeRADIUS 2.0 is now available as the net/freeradius2 port. All FreeRADIUS
users are advised to consider upgrading to 2.0. It is the FreeRADIUS team's
intention to put the 1.x server into 'maintenance' mode with just critical
bug fixes.[1] 2.0 has many improvements including numerous bug fixes that
were too difficult for the 1.x server, as well as many new features.
Before uninstalling 1.x, it is recommended that you backup your
configuration, which is typically in /usr/local/etc/raddb, then move it
out of the way. It is also worth backing up the default configuration,
which is typically in /usr/local/share/examples/freeradius/raddb.
1.x configurations should work with the 2.0 server [2]. However the port
automatically upgrades any unedited files in the configuration when you
install a new version of FreeRADIUS. Installing 2.0 with the residue of a
1.x configuration in the default location will result in a mixed 1.x and
2.0 configuration that may not work.
The recommended approach is to diff your 1.x configuration against the
default 1.x configuration, then make corresponding changes to a copy
of the default 2.0 configuration. If you moved your 1.x configuration out
of the way before upgrading, you will have a 2.0 configuration ready to
edit in the default location. It is worth reading man 5 unlang for details
of the new FreeRADIUS 'un-language' before starting.
Alternatively, you can move your 1.x configuration to another location,
such as /usr/local/etc/raddb_v1, then edit /etc/rc.conf to point the rc.d
script to that location. For example:
radiusd_flags="-d /usr/local/etc/raddb_v1"
I cannot guarantee that all 1.x configurations will work with the 2.0
server, and I only recommend using a 1.x configuration as an interim
measure.
[1] - http://www.freeradius.org/business/roadmap.html
[2] - http://preview.tinyurl.com/ysrr6a
20080114:
AFFECTS: users of devel/perforce
AUTHOR: lth@FreeBSD.org
Perforce has been updated to version 2007.3. Upgrading is fairly
straightforward, but it is still highly recommended to follow the
upgrading instructions in the release notes:
http://www.perforce.com/perforce/doc.073/user/relnotes.txt
20080108:
AFFECTS: users of irc/bitlbee
AUTHOR: brix@FreeBSD.org
irc/bitlbee now stores saved user settings in /var/db/bitlbee/, not
$PREFIX/etc/bitlbee/. You will have to manually move any existing user
settings to the new location (or override the user settings directory
using -d if you wish to keep the old behavior). Other configuration
files are still kept in $PREFIX/etc/bitlbee/ by default.
The default installation is now configured for running bitlbee as user
'nobody' by default. Make sure any existing configuration files are
readable by that user.
$FreeBSD$
Reference in New Issue View Git Blame Copy Permalink