mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-12 03:00:28 +00:00
Code Issues Releases Activity
3fcff495cd
freebsd-ports/print/ghostscript8/Makefile
Thierry Thomas eeafa3c831 Adding a post-installation message , telling the user that he needs a 
dvips to run dvipdf.

PR:		ports/117878
Submitted by:	Steve Wills <steve (at) mouf.net>
2008-01-01 16:45:31 +00:00

303 lines
9.0 KiB
Makefile
Raw Blame History

# New ports collection makefile for: ghostscript
# Date created: Tue Jun 10 21:58:54 CEST 1997
# Whom: Andreas Klemm <andreas@klemm.gtn.com>
#
# $FreeBSD$
#
PORTNAME= ghostscript
PORTVERSION= ${GS_VERSION}
PORTREVISION= ${GS_REVISION}
PORTEPOCH= ${GS_EPOCH}
CATEGORIES= print
MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
http://www.humblesoft.com/pub/:epag \
ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs
MASTER_SITE_SUBDIR= ghostscript/:gs_srcs
PKGNAMESUFFIX= -gpl
DISTFILES= ${GS_SRCS}:gs_srcs \
${EPAG_SRCS}:epag
DIST_SUBDIR= ghostscript
EXTRACT_ONLY= ${GS_SRCS}
MAINTAINER= ports@FreeBSD.org
COMMENT= GPL Postscript interpreter
LIB_DEPENDS= jpeg.9:${PORTSDIR}/graphics/jpeg \
png.5:${PORTSDIR}/graphics/png
RUN_DEPENDS= ${LOCALBASE}/share/ghostscript/fonts/a010013l.pfb:${PORTSDIR}/print/gsfonts
CONFLICTS= ghostscript-gnu*
USE_BZIP2= yes
USE_GMAKE= yes
MAKE_ENV= CC="${CC}" CXX="${CXX}" CFLAGS_STANDARD="${CFLAGS}" \
XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}" \
EXTRALIBS="${EXTRALIBS}"
PLIST_SUB= GS_VERSION="${GS_VERSION}" \
CIDFONTDIR="${CIDFONTDIR}"
SCRIPTS_ENV= GS_DRIVERS_LIST="${GS_DRIVERS_LIST}" \
WITHOUT_X11="${WITHOUT_X11}" \
WITH_SVGALIB="${WITH_SVGALIB}" \
WITH_ICONV="${WITH_ICONV}"
MAN1= dvipdf.1 font2c.1 gs.1 gslp.1 gsnd.1 gs-pcl3.1 pcl3opts.1 \
pdf2dsc.1 pdf2ps.1 pdfopt.1 pf2afm.1 pfbtopfa.1 printafm.1 \
ps2ascii.1 ps2epsi.1 ps2pdf.1 ps2pdfwr.1 ps2ps.1 wftopfa.1
MLINKS= gslp.1 gsbj.1 \
gslp.1 gsdj.1 \
gslp.1 gsdj500.1 \
gslp.1 gslj.1 \
ps2pdf.1 ps2pdf12.1 \
ps2pdf.1 ps2pdf13.1 \
ps2ps.1 eps2eps.1
XCFLAGS= ${PTHREAD_CFLAGS}
XLDFLAGS= ${PTHREAD_LIBS}
MSG_PAPERSIZE= "NOTE: Type \"make A4=yes\" to use A4 paper size by default."
.if !defined(WITH_LETTERSIZE)
.if defined(A4) || defined(WITH_A4SIZE)
XCFLAGS+= -DA4
MSG_PAPERSIZE= "NOTE: Default paper size will be A4."
.endif
.endif
.if defined(WITHOUT_X11)
PKGNAMESUFFIX:= ${PKGNAMESUFFIX}-nox11
.else
USE_XORG= xt xext
.endif
.if defined(WITH_SVGALIB)
LIB_DEPENDS+= vga.1:${PORTSDIR}/graphics/svgalib
.endif
.if defined(WITH_ICONV)
USE_ICONV= yes
EXTRALIBS+= -liconv
.endif
.if defined(WITH_FONTCONFIG)
LIB_DEPENDS+= fontconfig.1:${PORTSDIR}/x11-fonts/fontconfig
XCFLAGS+= -DHAVE_FONTCONFIG=1
EXTRALIBS+= -lfontconfig
.endif
.if defined(WITH_FT_BRIDGE)
BUILD_DEPENDS+= ${LOCALBASE}/lib/libfreetype.a:${PORTSDIR}/print/freetype2
MAKE_ENV+= FT_BRIDGE=1 FT_ROOT="${WRKSRC}/freetype" FT_LIB_EXT=".a"
.endif
.if defined(WITH_SHLIB)
.if defined(WITHOUT_X11)
MAKE_ENV+= SOC_LOADER="dxmainc.c"
.else
USE_GNOME= gtk20
MAKE_ENV+= SOC_LOADER="dxmain.c" \
SOC_CFLAGS="`pkg-config --cflags gtk+-2.0`" \
SOC_LIBS="`pkg-config --libs gtk+-2.0`"
.endif
ALL_TARGET= so pcl3opts
INSTALL_TARGET= soinstall
USE_LDCONFIG= yes
PLIST_SUB+= SHLIB="" SHLIB_VER="${GS_VERSION:R}"
INCLUDEDIR= ${PREFIX}/include/ghostscript
.else
ALL_TARGET= all pcl3opts
PLIST_SUB+= SHLIB="@comment "
.endif
GS_SRCS= ${DISTNAME}${EXTRACT_SUFX}
CIDFONTDIR= ${PREFIX}/share/ghostscript/${GS_VERSION}/Resource
# Additional Drivers:
# EPAG - additional driver for Epson ESC/Page printers
# http://www.humblesoft.com/gdevepag.html
EPAG= epag
EPAG_VERS= 3.09
EPAG_NAME= ${EPAG}-${EPAG_VERS}
EPAG_SRCS= ${EPAG_NAME}.tar.gz
.include "Makefile.inc"
.include <bsd.port.pre.mk>
.SILENT:
pre-everything::
${ECHO_MSG} ${MSG_PAPERSIZE}
post-extract:
${ECHO_MSG} ">>> in post-extract ..."
# ** 3rd party driver **
# Note: don't forget to add those devices in scripts/configure,
# which update unix-gcc.mak to build gs with these new devices!
#
# for EPAG driver
${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..."
${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS}
${LN} -sf ${EPAG_NAME} ${WRKSRC}/${EPAG}
post-patch:
${REINPLACE_CMD} -e 's|^DEVICE_DEVS|#DEVICE_DEVS|g' \
${WRKSRC}/src/unix-gcc.mak
${REINPLACE_CMD} -e 's|\. de|\.|g' \
${WRKSRC}/src/unixinst.mak
# for DMPRT driver
${REINPLACE_CMD} -e 's|%%DATADIR%%|${DATADIR}|g ; \
s|%%GS_VERSION%%|${GS_VERSION}|g' \
${WRKSRC}/contrib/japanese/dmp_site.ps
# here we apply the modifications necessary to build the 3rd party drivers
# advantage: you see unmodified makefiles after a pure make extract
pre-configure:
${ECHO_MSG} ">>> in pre-configure ..."
# for EPAG driver
${ECHO_MSG} ">>> adding EPAG driver to contrib.mak ..."
${CAT} ${FILESDIR}/epag.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
post-configure:
${ECHO_MSG} ">>> in post-configure ..."
cd ${WRKSRC}/jasper ; \
${SETENV} ${MAKE_ENV} ${SH} ./configure
pre-build:
${ECHO_MSG} ">>> in pre-build ..."
${ECHO_MSG} ">>> creating directories for compilation ..."
${MKDIR} ${WRKSRC}/obj
${MKDIR} ${WRKSRC}/bin
# for EPAG driver
${ECHO_MSG} ">>> building EPAG utility ..."
cd ${WRKSRC}/${EPAG_NAME} ; \
${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
${ECHO_MSG} ">>> creating symlinks for EPAG ..."
.for i in gdevepag.c
${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src
.endfor
.if defined(WITH_FT_BRIDGE)
${MKDIR} ${WRKSRC}/freetype/include
${LN} -sf ${LOCALBASE}/include/ft2build.h \
${WRKSRC}/freetype/include/ft2build.h
${LN} -sf ${LOCALBASE}/include/freetype2/freetype \
${WRKSRC}/freetype/include/freetype
${MKDIR} ${WRKSRC}/freetype/objs
${LN} -sf ${LOCALBASE}/lib/libfreetype.a \
${WRKSRC}/freetype/objs/freetype214MT_D.a
.endif
pre-su-install:
${ECHO_MSG} ">>> in pre-install ..."
${ECHO_MSG} ">>> creating ghostscript destdir ..."
${MKDIR} ${DATADIR}
${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}
.if defined(WITH_SHLIB)
${MKDIR} ${INCLUDEDIR}
${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${INCLUDEDIR}
.endif
post-install:
${ECHO_MSG} ">>> in post-install ..."
${LN} -s -f ${LOCALBASE}/share/fonts/CIDFont ${CIDFONTDIR}/CIDFont
.if defined(WITH_SHLIB)
.for i in iapi.h ierrors.h
${INSTALL_DATA} ${WRKSRC}/src/${i} ${INCLUDEDIR}
.endfor
.endif
${ECHO_MSG} ">>> stripping gs ..."
.if defined(WITH_SHLIB)
${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx
${LN} -sf gsc ${PREFIX}/bin/gs
.else
${STRIP_CMD} ${PREFIX}/bin/gs
.endif
# for PCL3 driver
${ECHO_MSG} ">>> installing PCL3 utility in bindir ..."
${INSTALL_PROGRAM} ${WRKSRC}/bin/pcl3opts ${PREFIX}/bin
${ECHO_MSG} ">>> installing PCL3 manpages ..."
.for i in gs-pcl3.1 pcl3opts.1
${INSTALL_MAN} ${WRKSRC}/contrib/pcl3/doc/${i} ${MANPREFIX}/man/man1
.endfor
# other pcl3 stuff, which might be interesting for runtime
${ECHO_MSG} ">>> creating PCL3 destdir ..."
${MKDIR} ${DATADIR}/${GS_VERSION}/pcl3
${ECHO_MSG} ">>> installing files in PCL3 destdir ..."
.for i in NEWS BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \
ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \
ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \
ps/margins-EnvDLRotated.ps ps/margins-Letter.ps \
ps/margins-LetterRotated.ps
${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \
${DATADIR}/${GS_VERSION}/pcl3
.endfor
# for DMPRT driver
${ECHO_MSG} ">>> installing DMPRT resources ..."
.for i in dmp_init.ps dmp_site.ps escp_24.src
${INSTALL_DATA} ${WRKSRC}/contrib/japanese/${i} \
${DATADIR}/${GS_VERSION}/lib
.endfor
# for EPAG driver
${ECHO_MSG} ">>> installing EPAG utility in bindir ..."
${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin
# contributed UPP driver
${ECHO_MSG} ">>> installing contributed UPP profiles ..."
${INSTALL_DATA} ${WRKSRC}/contrib/uniprint/*.upp \
${DATADIR}/${GS_VERSION}/lib
.for i in lqx70ch.upp lqx70cl.upp lqx70cm.upp
${INSTALL_DATA} ${FILESDIR}/${i} \
${DATADIR}/${GS_VERSION}/lib
.endfor
#
# now NOPORTDOCS dependend stuff
#
.if !defined(NOPORTDOCS)
${ECHO_MSG} ">>> installing PORTDOC stuff ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/japanese
${INSTALL_DATA} ${WRKSRC}/contrib/japanese/doc/* \
${DOCSDIR}/${GS_VERSION}/japanese
# for HP2200 driver
${MKDIR} ${DOCSDIR}/${GS_VERSION}/chp2200
.for file in AUTHORS INSTALL
${INSTALL_DATA} ${WRKSRC}/contrib/chp2200/${file} \
${DOCSDIR}/${GS_VERSION}/chp2200
.endfor
# contributed UPP driver
${MKDIR} ${DOCSDIR}/${GS_VERSION}/epson740
.for file in README upp-HowTo-to-be
${INSTALL_DATA} ${WRKSRC}/contrib/epson740/${file} \
${DOCSDIR}/${GS_VERSION}/epson740
.endfor
# for LXM3200 driver
${MKDIR} ${DOCSDIR}/${GS_VERSION}/lxm3200-tweaked
${INSTALL_DATA} ${WRKSRC}/contrib/lxm3200-tweaked/* \
${DOCSDIR}/${GS_VERSION}/lxm3200-tweaked
# for MD2K driver
${MKDIR} ${DOCSDIR}/${GS_VERSION}/md2k_md5k
${INSTALL_DATA} ${WRKSRC}/contrib/md2k_md5k/* \
${DOCSDIR}/${GS_VERSION}/md2k_md5k
# for PCL3 driver
${ECHO_MSG} ">>> installing PCL3 docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/pcl3
.for i in NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html
${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \
${DOCSDIR}/${GS_VERSION}/pcl3
.endfor
# for EPAG driver
${ECHO_MSG} ">>> installing EPAG docs ..."
${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG}
.for i in ert.txt gdevepag.txt ChangeLog
${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${EPAG}
.endfor
.for i in psprint gsepagif.sh
${INSTALL_SCRIPT} ${WRKSRC}/${EPAG_NAME}/${i} \
${DOCSDIR}/${GS_VERSION}/${EPAG}
.endfor
.endif
${ECHO_MSG} "> post-installation tasks completed."
@${ECHO_MSG}
@${CAT} ${PKGMESSAGE}
@${ECHO_MSG}
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink