mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-03 01:23:49 +00:00
Code Issues Releases Activity
6f8d2378c4
freebsd-ports/Mk/bsd.linux-apps.mk
Alexander Leidinger 435ea2a95a Re-commit of 
64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions (incl. EXP runs by
      antoine)
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with the new 64 bit parts
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (antoine after some EXP-runs)
2015-08-09 19:14:13 +00:00

618 lines
29 KiB
Makefile
Raw Blame History

#-*- tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Please view me with 4 column tabs!
# This section defines possible names of linux infrastructure ports
# (components) and all information necessary for ports to use those components.
#
# Ports can use this as follows:
#
# USE_LINUX_APPS= esound xorglibs
#
# .include <bsd.port.mk>
#
# As a result proper RUN_DEPENDS will be added.
#
# Variables:
# LINUX_DIST_SUFFIX - Contains the value which is added to a port's name
# (i.e. linux<this_variable>-port ) to get the right
# linux infrastructure port.
# _ALL_LINUX_APPS - A (sorted) list of all linux infrastructure ports
# (components), covered here.
# OVERRIDE_LINUX_NONBASE_PORTS
# - This specifies a none-default linux infrastructure ports to use.
# The valid value is "f10" to use Linux Fedora 10 ports.
# This is an user-only variable. Don't use it in any port,
# it's meant to be used in make.conf.
.if !defined(_POSTMKINCLUDED) && !defined(Linux_APPS_Pre_Include)
Linux_APPS_Include_MAINTAINER= emulation@FreeBSD.org
Linux_APPS_Pre_Include= bsd.linux-apps.mk
.endif
.if defined(_POSTMKINCLUDED) && !defined(Linux_APPS_Post_Include)
Linux_APPS_Post_Include= bsd.linux-apps.mk
#new
. if defined(OVERRIDE_LINUX_NONBASE_PORTS)
. if ${OVERRIDE_LINUX_NONBASE_PORTS} == "f10" || ${OVERRIDE_LINUX_NONBASE_PORTS} == "c6" || ${OVERRIDE_LINUX_NONBASE_PORTS} == "c6_64"
LINUX_DIST_SUFFIX= -${OVERRIDE_LINUX_NONBASE_PORTS}
LINUX_BASEPORT_NAME= -${OVERRIDE_LINUX_NONBASE_PORTS:S/_64//}
. else
IGNORE= valid values for OVERRIDE_LINUX_NONBASE_PORTS are: \"f10\", \"c6\", and \"c6_64\"
. endif
. elif defined(USE_LINUX)
LINUX_DIST_SUFFIX= -${USE_LINUX}
LINUX_BASEPORT_NAME= -${USE_LINUX:S/_64//}
. else
# default to CentOS
LINUX_DIST_SUFFIX= -c6
LINUX_BASEPORT_NAME= -c6
. endif
WEB_AUTH= nvu
# Non-version specific components
_LINUX_APPS_ALL= allegro alsalib alsa-plugins-oss alsa-plugins-pulseaudio \
arts aspell atk avahi-libs cairo cups-libs curl dri devtools esound expat \
flac fontconfig freealut gdkpixbuf gdkpixbuf2 gnutls gtk2 hicontheme imlib jpeg libaudiofile \
libasyncns libg2c libgcrypt libglade2 libglu libgpg-error libmng libogg \
libpciaccess libsigcpp20 libsndfile libtasn1 libtheora libvorbis libxml2 mikmod \
naslibs ncurses-base openal openmotif openssl openssl-compat pango png \
pulseaudio-libs scimgtk scimlibs sdl12 sdlimage sdlmixer sdlttf tiff \
tcp_wrappers-libs xorglibs ucl ungif upx webauth
# 2.6.16 components
_LINUX_26_APPS= blt cyrus-sasl2 dbusglib dbuslibs \
libidn libssh2 libv4l nspr nss openal-soft \
openldap qt45 sqlite3 tcl85 tk85 qt47 qt47-x11 qt47-webkit
_LINUX_APPS_ALL+= ${_LINUX_26_APPS}
# Component definition section
#
# component${LINUX_DIST_SUFFIX:S/-/_/}_FILE
# - Variables are used to name a file to check,
# file names may differ for different LINUX_DIST_SUFFIX.
# The value is LINUX_DIST_SUFFIX without the leading dash.
# component_DETECT - The resulting file to check for a dependency existence.
# component_PORT - A port which will be used to install a missing dependency.
# component_DEPENDS - A list of components the current component depends on.
allegro_f10_FILE= ${LINUXBASE}/usr/lib/liballeg-4.2.2.so
#FIXME: locate weird location for allegro c6 libs
allegro_DETECT= ${allegro${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
allegro_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-allegro
allegro_DEPENDS= xorglibs
alsa-plugins-oss_f10_FILE= ${LINUXBASE}/usr/lib/alsa-lib/libasound_module_pcm_oss.so
alsa-plugins-oss_c6_FILE= ${LINUXBASE}/usr/lib/alsa-lib/libasound_module_pcm_oss.so
alsa-plugins-oss_c6_64_FILE= ${LINUXBASE}/usr/lib64/alsa-lib/libasound_module_pcm_oss.so
alsa-plugins-oss_DETECT= ${alsa-plugins-oss${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
alsa-plugins-oss_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-alsa-plugins-oss
alsa-plugins-oss_DEPENDS= alsalib
alsa-plugins-pulseaudio_c6_FILE= ${LINUXBASE}/usr/lib/alsa-lib/libasound_module_conf_pulse.so
alsa-plugins-pulseaudio_c6_64_FILE= ${LINUXBASE}/usr/lib64/alsa-lib/libasound_module_conf_pulse.so
alsa-plugins-pulseaudio_DETECT= ${alsa-plugins-oss${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
alsa-plugins-pulseaudio_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-alsa-plugins-pulseaudio
alsa-plugins-pulseaudio_DEPENDS= alsalib
alsalib_f10_FILE= ${LINUXBASE}/lib/libasound.so.2.0.0
alsalib_c6_FILE= ${LINUXBASE}/lib/libasound.so.2.0.0
alsalib_c6_64_FILE= ${LINUXBASE}/lib64/libasound.so.2.0.0
alsalib_DETECT= ${alsalib${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
alsalib_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-alsa-lib
arts_f10_FILE= ${LINUXBASE}/usr/lib/libartsc.so.0
arts_c6_FILE= ${LINUXBASE}/usr/lib/libartsc.so.0
arts_c6_64_FILE= ${LINUXBASE}/usr/lib64/libartsc.so.0
arts_DETECT= ${arts${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
arts_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-arts
aspell_f10_FILE= ${LINUXBASE}/usr/lib/libaspell.so.15.1.4
aspell_c6_FILE= ${LINUXBASE}/usr/lib/libaspell.so.15.1.4
aspell_c6_64_FILE= ${LINUXBASE}/usr/lib64/libaspell.so.15.1.4
aspell_DETECT= ${aspell${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
aspell_PORT= ${PORTSDIR}/textproc/linux${LINUX_BASEPORT_NAME}-aspell
atk_f10_FILE= ${LINUXBASE}/usr/lib/libatk-1.0.so.0.2409.1
atk_c6_FILE= ${LINUXBASE}/usr/lib/libatk-1.0.so.0.3009.1
atk_c6_64_FILE= ${LINUXBASE}/usr/lib64/libatk-1.0.so.0.3009.1
atk_DETECT= ${atk${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
atk_PORT= ${PORTSDIR}/accessibility/linux${LINUX_BASEPORT_NAME}-atk
avahi-libs_c6_FILE= ${LINUXBASE}/usr/lib/libavahi-client.so.3.2.5
avahi-libs_c6_64_FILE= ${LINUXBASE}/usr/lib64/libavahi-client.so.3.2.5
avahi-libs_DETECT= ${avahi-libs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
avahi-libs_PORT= ${PORTSDIR}/net/linux${LINUX_BASEPORT_NAME}-avahi-libs
blt_f10_FILE= ${LINUXBASE}/usr/lib/libBLT24.so # FIXME: deprecated, merged into tcl/tk85
blt_DETECT= ${blt${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
blt_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-blt
blt_DEPENDS= tcl85 tk85 xorglibs
cairo_f10_FILE= ${LINUXBASE}/usr/lib/libcairo.so.2.10800.0
cairo_c6_FILE= ${LINUXBASE}/usr/lib/libcairo.so.2.10800.8
cairo_c6_64_FILE= ${LINUXBASE}/usr/lib64/libcairo.so.2.10800.8
cairo_DETECT= ${cairo${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
cairo_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-cairo
cairo_DEPENDS= fontconfig png xorglibs
cups-libs_f10_FILE= ${LINUXBASE}/usr/lib/libcups.so.2
cups-libs_c6_FILE= ${LINUXBASE}/usr/lib/libcups.so.2
cups-libs_c6_64_FILE= ${LINUXBASE}/usr/lib64/libcups.so.2
cups-libs_DETECT= ${cups-libs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
cups-libs_PORT= ${PORTSDIR}/print/linux${LINUX_BASEPORT_NAME}-cups-libs
cups-libs_DEPENDS= gnutls
curl_f10_FILE= ${LINUXBASE}/usr/lib/libcurl.so.4.1.1
curl_c6_FILE= ${LINUXBASE}/usr/lib/libcurl.so.4.1.1
curl_c6_64_FILE= ${LINUXBASE}/usr/lib64/libcurl.so.4.1.1
curl_DETECT= ${curl${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
curl_PORT= ${PORTSDIR}/ftp/linux${LINUX_BASEPORT_NAME}-curl
curl_DEPENDS= cyrus-sasl2 openldap
cyrus-sasl2_f10_FILE= ${LINUXBASE}/usr/lib/libsasl2.so.2.0.22
cyrus-sasl2_c6_FILE= ${LINUXBASE}/usr/lib/libsasl2.so.2.0.23
cyrus-sasl2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libsasl2.so.2.0.23
cyrus-sasl2_DETECT= ${cyrus-sasl2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
cyrus-sasl2_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-cyrus-sasl2
dbusglib_f10_FILE= ${LINUXBASE}/usr/lib/libdbus-glib-1.so.2
dbusglib_c6_FILE= ${LINUXBASE}/usr/lib/libdbus-glib-1.so.2
dbusglib_c6_64_FILE= ${LINUXBASE}/usr/lib64/libdbus-glib-1.so.2
dbusglib_DETECT= ${dbusglib${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
dbusglib_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-dbus-glib
dbusglib_DEPENDS= dbuslibs expat
dbuslibs_f10_FILE= ${LINUXBASE}/lib/libdbus-1.so.3
dbuslibs_c6_FILE= ${LINUXBASE}/lib/libdbus-1.so.3
dbuslibs_c6_64_FILE= ${LINUXBASE}/lib64/libdbus-1.so.3
dbuslibs_DETECT= ${dbuslibs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
dbuslibs_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-dbus-libs
dri_f10_FILE= ${LINUXBASE}/usr/lib/libGL.so.1.2
dri_c6_FILE= ${LINUXBASE}/usr/lib/libGL.so.1.2.0
dri_c6_64_FILE= ${LINUXBASE}/usr/lib64/libGL.so.1.2.0
dri_DETECT= ${dri${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
dri_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-dri
dri_DEPENDS= xorglibs
devtools_f10_FILE= ${LINUXBASE}/usr/bin/i386-redhat-linux-gcc
devtools_c6_FILE= ${LINUXBASE}/usr/bin/gcc
devtools_c6_64_FILE= ${LINUXBASE}/usr/bin/gcc
devtools_DETECT= ${devtools${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
devtools_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-devtools
esound_f10_FILE= ${LINUXBASE}/usr/lib/libesd.so.0.2.39
esound_c6_FILE= ${LINUXBASE}/usr/lib/libesd.so.0.2.39
esound_c6_64_FILE= ${LINUXBASE}/usr/lib64/libesd.so.0.2.39
esound_DETECT= ${esound${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
esound_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-esound
esound_DEPENDS= libaudiofile
expat_f10_FILE= ${LINUXBASE}/lib/libexpat.so.1
expat_c6_FILE= ${LINUXBASE}/lib/libexpat.so.1
expat_c6_64_FILE= ${LINUXBASE}/lib64/libexpat.so.1
expat_DETECT= ${expat${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
expat_PORT= ${PORTSDIR}/textproc/linux${LINUX_BASEPORT_NAME}-expat
fontconfig_f10_FILE= ${LINUXBASE}/usr/lib/libfontconfig.so.1.3.0
fontconfig_c6_FILE= ${LINUXBASE}/usr/lib/libfontconfig.so.1.4.4
fontconfig_c6_64_FILE= ${LINUXBASE}/usr/lib64/libfontconfig.so.1.4.4
fontconfig_DETECT= ${fontconfig${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
fontconfig_PORT= ${PORTSDIR}/x11-fonts/linux${LINUX_BASEPORT_NAME}-fontconfig
fontconfig_DEPENDS= expat
flac_c6_FILE= ${LINUXBASE}/usr/lib/libFLAC.so.8.2.0
flac_c6_64_FILE= ${LINUXBASE}/usr/lib64/libFLAC.so.8.2.0
flac_DETECT= ${flac${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
flac_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-flac
freealut_f10_FILE= ${LINUXBASE}/usr/lib/libalut.so.0.1.0
freealut_DETECT= ${freealut${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
freealut_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-freealut
freealut_DEPENDS= openal
gdkpixbuf_f10_FILE= ${LINUXBASE}/usr/lib/libgdk_pixbuf.so.2
gdkpixbuf_DETECT= ${gdkpixbuf${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
gdkpixbuf_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-gdk-pixbuf
gdkpixbuf2_f10_FILE= ${LINUXBASE}/usr/lib/libgdk_pixbuf-2.0.so.0
gdkpixbuf2_c6_FILE= ${LINUXBASE}/usr/lib/libgdk_pixbuf-2.0.so.0
gdkpixbuf2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libgdk_pixbuf-2.0.so.0
gdkpixbuf2_DETECT= ${gdkpixbuf2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
.if ${USE_LINUX} == "f10"
gdkpixbuf2_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-gtk2
.else # default to CentOS 6.
gdkpixbuf2_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-gdk-pixbuf2
.endif
gnutls_f10_FILE= ${LINUXBASE}/usr/lib/libgnutls.so.26.4.6
gnutls_c6_FILE= ${LINUXBASE}/usr/lib/libgnutls.so.26.14.12
gnutls_c6_64_FILE= ${LINUXBASE}/usr/lib64/libgnutls.so.26.14.12
gnutls_DETECT= ${gnutls${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
gnutls_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-gnutls
gnutls_DEPENDS= libtasn1 libgcrypt libgpg-error
gtk2_f10_FILE= ${LINUXBASE}/usr/lib/libgtk-x11-2.0.so.0.1400.7
gtk2_c6_FILE= ${LINUXBASE}/usr/lib/libgtk-x11-2.0.so.0.2400.23
gtk2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libgtk-x11-2.0.so.0.2400.23
gtk2_DETECT= ${gtk2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
gtk2_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-gtk2
gtk2_DEPENDS= atk gdkpixbuf2 jpeg png pango tiff xorglibs
hicontheme_f10_FILE= ${LINUXBASE}/usr/share/icons/hicolor
hicontheme_c6_FILE= ${LINUXBASE}/usr/share/icons/hicolor
hicontheme_c6_64_FILE= ${LINUXBASE}/usr/share/icons/hicolor
hicontheme_DETECT= ${hicontheme${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
hicontheme_PORT= ${PORTSDIR}/x11-themes/linux${LINUX_BASEPORT_NAME}-hicolor-icon-theme
imlib_f10_FILE= ${LINUXBASE}/usr/lib/libgdk_imlib.so.1.9.15
imlib_DETECT= ${imlib${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
imlib_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-imlib
jpeg_f10_FILE= ${LINUXBASE}/usr/lib/libjpeg.so.62.0.0
jpeg_c6_FILE= ${LINUXBASE}/usr/lib/libjpeg.so.62.0.0
jpeg_c6_64_FILE= ${LINUXBASE}/usr/lib64/libjpeg.so.62.0.0
jpeg_DETECT= ${jpeg${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
jpeg_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-jpeg
libasyncns_f10_FILE= ${LINUXBASE}/usr/lib/libasyncns.so.0.3.1
libasyncns_c6_FILE= ${LINUXBASE}/usr/lib/libasyncns.so.0.3.1
libasyncns_c6_64_FILE= ${LINUXBASE}/usr/lib64/libasyncns.so.0.3.1
libasyncns_DETECT= ${libasyncns${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libasyncns_PORT= ${PORTSDIR}/dns/linux${LINUX_BASEPORT_NAME}-libasyncns
libaudiofile_f10_FILE= ${LINUXBASE}/usr/lib/libaudiofile.so.0.0.2
libaudiofile_c6_FILE= ${LINUXBASE}/usr/lib/libaudiofile.so.0.0.2
libaudiofile_c6_64_FILE=${LINUXBASE}/usr/lib64/libaudiofile.so.0.0.2
libaudiofile_DETECT= ${libaudiofile${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libaudiofile_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-libaudiofile
libg2c_f10_FILE= ${LINUXBASE}/usr/lib/libg2c.so.0.0.0
libg2c_DETECT= ${libg2c${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libg2c_PORT= ${PORTSDIR}/lang/linux${LINUX_BASEPORT_NAME}-libg2c
libgcrypt_f10_FILE= ${LINUXBASE}/lib/libgcrypt.so.11.5.2
libgcrypt_c6_FILE= ${LINUXBASE}/lib/libgcrypt.so.11.5.3
libgcrypt_c6_64_FILE= ${LINUXBASE}/lib64/libgcrypt.so.11.5.3
libgcrypt_DETECT= ${libgcrypt${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libgcrypt_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-libgcrypt
libglade2_f10_FILE= ${LINUXBASE}/usr/lib/libglade-2.0.so.0.0.7
libglade2_c6_FILE= ${LINUXBASE}/usr/lib/libglade-2.0.so.0.0.7
libglade2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libglade-2.0.so.0.0.7
libglade2_DETECT= ${libglade2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libglade2_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-libglade2
libglu_f10_FILE= ${LINUXBASE}/usr/lib/libGLU.so.1
libglu_c6_FILE= ${LINUXBASE}/usr/lib/libGLU.so.1
libglu_c6_64_FILE= ${LINUXBASE}/usr/lib64/libGLU.so.1
libglu_DETECT= ${libglu${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libglu_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-libGLU
libgpg-error_f10_FILE= ${LINUXBASE}/lib/libgpg-error.so.0.4.0
libgpg-error_c6_FILE= ${LINUXBASE}/lib/libgpg-error.so.0.5.0
libgpg-error_c6_64_FILE=${LINUXBASE}/lib64/libgpg-error.so.0.5.0
libgpg-error_DETECT= ${libgpg-error${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libgpg-error_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-libgpg-error
# no libidn_f10_FILE (libidn is integrated into linux_base-f10 port)
libidn_DETECT= ${libidn${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libidn_PORT= ${PORTSDIR}/dns/linux${LINUX_BASEPORT_NAME}-libidn
libmng_f10_FILE= ${LINUXBASE}/usr/lib/libmng.so.1.0.0
libmng_DETECT= ${libmng${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libmng_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-libmng
libmng_DEPENDS= jpeg
libogg_f10_FILE= ${LINUXBASE}/usr/lib/libogg.so.0.5.3
libogg_c6_FILE= ${LINUXBASE}/usr/lib/libogg.so.0.6.0
libogg_c6_64_FILE= ${LINUXBASE}/usr/lib64/libogg.so.0.6.0
libogg_DETECT= ${libogg${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libogg_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-libogg
libpciaccess_c6_FILE= ${LINUXBASE}/usr/lib/libpciaccess.so.0.11.1
libpciaccess_DETECT= ${libpciaccess${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libpciaccess_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-libpciaccess
libsigcpp20_f10_FILE= ${LINUXBASE}/usr/lib/libsigc-2.0.so.0
libsigcpp20_c6_FILE= ${LINUXBASE}/usr/lib/libsigc-2.0.so.0
libsigcpp20_c6_64_FILE= ${LINUXBASE}/usr/lib64/libsigc-2.0.so.0
libsigcpp20_DETECT= ${libsigcpp20${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libsigcpp20_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-libsigc++20
libsndfile_c6_FILE= ${LINUXBASE}/usr/lib/libsndfile.so.1.0.20
libsndfile_c6_64_FILE= ${LINUXBASE}/usr/lib64/libsndfile.so.1.0.20
libsndfile_DETECT= ${libsndfile${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libsndfile_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-libsndfile
libssh2_f10_FILE= ${LINUXBASE}/usr/lib/libssh2.so.1
libssh2_c6_FILE= ${LINUXBASE}/usr/lib/libssh2.so.1.0.1
libssh2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libssh2.so.1.0.1
libssh2_DETECT= ${libssh2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libssh2_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-libssh2
libssh2_DEPENDS= openssl
libv4l_f10_FILE= ${LINUXBASE}/usr/lib/libv4l1.so.0
libv4l_c6_FILE= ${LINUXBASE}/usr/lib/libv4l1.so.0
libv4l_c6_64_FILE= ${LINUXBASE}/usr/lib64/libv4l1.so.0
libv4l_DETECT= ${libv4l${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libv4l_PORT= ${PORTSDIR}/multimedia/linux${LINUX_BASEPORT_NAME}-libv4l
libtasn1_f10_FILE= ${LINUXBASE}/usr/lib/libtasn1.so.3.0.16
libtasn1_c6_FILE= ${LINUXBASE}/usr/lib/libtasn1.so.3.1.6
libtasn1_c6_64_FILE= ${LINUXBASE}/usr/lib64/libtasn1.so.3.1.6
libtasn1_DETECT= ${libtasn1${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libtasn1_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-libtasn1
libtheora_f10_FILE= ${LINUXBASE}/usr/lib/libtheora.so.0.3.3
libtheora_c6_FILE= ${LINUXBASE}/usr/lib/libtheora.so.0.3.9
libtheora_c6_64_FILE= ${LINUXBASE}/usr/lib64/libtheora.so.0.3.9
libtheora_DETECT= ${libtheora${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libtheora_PORT= ${PORTSDIR}/multimedia/linux${LINUX_BASEPORT_NAME}-libtheora
libvorbis_f10_FILE= ${LINUXBASE}/usr/lib/libvorbis.so.0.4.0
libvorbis_c6_FILE= ${LINUXBASE}/usr/lib/libvorbis.so.0.4.3
libvorbis_c6_64_FILE= ${LINUXBASE}/usr/lib64/libvorbis.so.0.4.3
libvorbis_DETECT= ${libvorbis${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libvorbis_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-libvorbis
libvorbis_DEPENDS= libogg
libxml2_f10_FILE= ${LINUXBASE}/usr/lib/libxml2.so.2.7.3
libxml2_c6_FILE= ${LINUXBASE}/usr/lib/libxml2.so.2.7.6
libxml2_c6_64_FILE= ${LINUXBASE}/usr/lib64/libxml2.so.2.7.6
libxml2_DETECT= ${libxml2${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
libxml2_PORT= ${PORTSDIR}/textproc/linux${LINUX_BASEPORT_NAME}-libxml2
mikmod_f10_FILE= ${LINUXBASE}/usr/lib/libmikmod.so.3.0.0
mikmod_c6_FILE= ${LINUXBASE}/usr/lib/libmikmod.so.3.0.0
mikmod_c6_64_FILE= ${LINUXBASE}/usr/lib64/libmikmod.so.3.0.0
mikmod_DETECT= ${mikmod${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
mikmod_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-mikmod
naslibs_f10_FILE= ${LINUXBASE}/usr/lib/libaudio.so.2
naslibs_c6_FILE= ${LINUXBASE}/usr/lib/libaudio.so.2
naslibs_c6_64_FILE= ${LINUXBASE}/usr/lib64/libaudio.so.2
naslibs_DETECT= ${naslibs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
naslibs_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-nas-libs
naslibs_DEPENDS= xorglibs
openldap_f10_FILE= ${LINUXBASE}/usr/lib/libldap-2.4.so.2.2.0
openldap_c6_FILE= ${LINUXBASE}/lib/libldap-2.4.so.2.10.2
openldap_c6_64_FILE= ${LINUXBASE}/lib64/libldap-2.4.so.2.10.2
openldap_DETECT= ${openldap${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openldap_PORT= ${PORTSDIR}/net/linux${LINUX_BASEPORT_NAME}-openldap
openmotif_f10_FILE= ${LINUXBASE}/usr/lib/libXm.so.4
openmotif_c6_FILE= ${LINUXBASE}/usr/lib/libXm.so.4.0.3
openmotif_c6_64_FILE= ${LINUXBASE}/usr/lib64/libXm.so.4.0.3
openmotif_DETECT= ${openmotif${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openmotif_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-openmotif
openmotif_DEPENDS= xorglibs
ncurses-base_f10_FILE= ${LINUXBASE}/lib/terminfo/a/ansi
ncurses-base_c6_FILE= ${LINUXBASE}/lib/terminfo/a/ansi
ncurses-base_c6_64_FILE=${LINUXBASE}/lib64/terminfo/a/ansi
ncurses-base_DETECT= ${ncurses-base${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
ncurses-base_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-ncurses-base
nspr_f10_FILE= ${LINUXBASE}/lib/libnspr4.so
nspr_c6_FILE= ${LINUXBASE}/lib/libnspr4.so
nspr_c6_64_FILE= ${LINUXBASE}/lib64/libnspr4.so
nspr_DETECT= ${nspr${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
nspr_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-nspr
nss_f10_FILE= ${LINUXBASE}/lib/libnss3.so
nss_c6_FILE= ${LINUXBASE}/usr/lib/libnss3.so
nss_c6_64_FILE= ${LINUXBASE}/usr/lib64/libnss3.so
nss_DETECT= ${nss${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
nss_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-nss
nss_DEPENDS= nspr sqlite3
openal_f10_FILE= ${LINUXBASE}/usr/lib/libopenal.so.0.0.0
openal_DETECT= ${openal${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openal_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-openal
openal_DEPENDS= alsalib arts esound libaudiofile libvorbis sdl12
openal-soft_f10_FILE= ${LINUXBASE}/usr/lib/libopenal.so.1.8.466
openal-soft_c6_FILE= ${LINUXBASE}/usr/lib/libopenal.so.1.12.854
openal-soft_c6_64_FILE= ${LINUXBASE}/usr/lib64/libopenal.so.1.12.854
openal-soft_DETECT= ${openal-soft${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openal-soft_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-openal-soft
openal-soft_DEPENDS= alsalib arts esound
openssl_f10_FILE= ${LINUXBASE}/lib/libssl.so.0.9.8g
openssl_c6_FILE= ${LINUXBASE}/usr/lib/libssl.so.10
openssl_c6_64_FILE= ${LINUXBASE}/usr/lib64/libssl.so.10
openssl_DETECT= ${openssl${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openssl_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-openssl
openssl-compat_c6_FILE= ${LINUXBASE}/usr/lib/libssl.so.0.9.8e
openssl-compat_c6_64_FILE= ${LINUXBASE}/usr/lib64/libssl.so.0.9.8e
openssl-compat_DETECT= ${openssl-compat${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
openssl-compat_PORT= ${PORTSDIR}/security/linux${LINUX_BASEPORT_NAME}-openssl-compat
pango_f10_FILE= ${LINUXBASE}/usr/lib/libpango-1.0.so.0.2800.3
pango_c6_FILE= ${LINUXBASE}/usr/lib/libpango-1.0.so.0.2800.1
pango_c6_64_FILE= ${LINUXBASE}/usr/lib64/libpango-1.0.so.0.2800.1
pango_DETECT= ${pango${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
pango_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-pango
pango_DEPENDS= cairo expat fontconfig xorglibs
png_f10_FILE= ${LINUXBASE}/usr/lib/libpng.so.3.37.0
png_c6_FILE= ${LINUXBASE}/usr/lib/libpng.so.3.49.0
png_c6_64_FILE= ${LINUXBASE}/usr/lib64/libpng.so.3.49.0
png_DETECT= ${png${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
png_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-png
pulseaudio-libs_f10_FILE= ${LINUXBASE}/usr/lib/libpulse.so.0
pulseaudio-libs_c6_FILE= ${LINUXBASE}/usr/lib/libpulse.so.0.12.2
pulseaudio-libs_c6_64_FILE= ${LINUXBASE}/usr/lib64/libpulse.so.0.12.2
pulseaudio-libs_DETECT= ${pulseaudio-libs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
pulseaudio-libs_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-pulseaudio-libs
qt45_f10_FILE= ${LINUXBASE}/usr/lib/libQtCore.so.4.5.3
qt45_DETECT= ${qt45${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
qt45_DEPENDS= fontconfig libmng png
sdl12_f10_FILE= ${LINUXBASE}/usr/lib/libSDL-1.2.so.0.11.2
sdl12_c6_FILE= ${LINUXBASE}/usr/lib/libSDL-1.2.so.0.11.3
sdl12_c6_64_FILE= ${LINUXBASE}/usr/lib64/libSDL-1.2.so.0.11.3
sdl12_DETECT= ${sdl12${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
sdl12_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-sdl12
sdl12_DEPENDS= xorglibs
sdlimage_f10_FILE= ${LINUXBASE}/usr/lib/libSDL_image-1.2.so.0.1.5
sdlimage_c6_FILE= ${LINUXBASE}/usr/lib/libSDL_image-1.2.so.0.8.4
sdlimage_c6_64_FILE= ${LINUXBASE}/usr/lib64/libSDL_image-1.2.so.0.8.4
sdlimage_DETECT= ${sdlimage${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
sdlimage_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-sdl_image
sdlimage_DEPENDS= jpeg png sdl12 tiff
sdlmixer_f10_FILE= ${LINUXBASE}/usr/lib/libSDL_mixer-1.2.so.0.2.6
sdlmixer_c6_FILE= ${LINUXBASE}/usr/lib/libSDL_mixer-1.2.so.0.12.0
sdlmixer_c6_64_FILE= ${LINUXBASE}/usr/lib64/libSDL_mixer-1.2.so.0.12.0
sdlmixer_DETECT= ${sdlmixer${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
sdlmixer_PORT= ${PORTSDIR}/audio/linux${LINUX_BASEPORT_NAME}-sdl_mixer
sdlmixer_DEPENDS= sdl12
sdlttf_f10_FILE= ${LINUXBASE}/usr/lib/libSDL_ttf-2.0.so.0.6.2
sdlttf_c6_FILE= ${LINUXBASE}/usr/lib/libSDL_ttf-2.0.so.0.6.3
sdlttf_c6_64_FILE= ${LINUXBASE}/usr/lib64/libSDL_ttf-2.0.so.0.6.3
sdlttf_DETECT= ${sdlttf${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
sdlttf_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-sdl_ttf
sdlttf_DEPENDS= sdl12
scimgtk_f10_FILE= ${LINUXBASE}/usr/lib/gtk-2.0/immodules/im-scim.so
scimgtk_DETECT= ${scimgtk${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
scimgtk_PORT= ${PORTSDIR}/textproc/linux${LINUX_BASEPORT_NAME}-scim-gtk
scimgtk_DEPENDS= gtk2 scimlibs
scimlibs_f10_FILE= ${LINUXBASE}/usr/lib/libscim-1.0.so.8
scimlibs_DETECT= ${scimlibs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
scimlibs_PORT= ${PORTSDIR}/textproc/linux${LINUX_BASEPORT_NAME}-scim-libs
scimlibs_DEPENDS= gtk2
sqlite3_f10_FILE= ${LINUXBASE}/usr/lib/libsqlite3.so.0
sqlite3_c6_FILE= ${LINUXBASE}/usr/lib/libsqlite3.so.0
sqlite3_c6_64_FILE= ${LINUXBASE}/usr/lib64/libsqlite3.so.0
sqlite3_DETECT= ${sqlite3${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
sqlite3_PORT= ${PORTSDIR}/databases/linux${LINUX_BASEPORT_NAME}-sqlite3
tcl85_f10_FILE= ${LINUXBASE}/usr/lib/libtcl8.5.so
tcl85_c6_FILE= ${LINUXBASE}/usr/lib/libtcl8.5.so
tcl85_c6_64_FILE= ${LINUXBASE}/usr/lib64/libtcl8.5.so
tcl85_DETECT= ${tcl85${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
tcl85_PORT= ${PORTSDIR}/lang/linux${LINUX_BASEPORT_NAME}-tcl85
tcp_wrappers-libs_c6_FILE= ${LINUXBASE}/lib/libwrap.so.0
tcp_wrappers-libs_c6_64_FILE= ${LINUXBASE}/lib64/libwrap.so.0
tcp_wrappers-libs_DETECT= ${tcp_wrappers-libs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
tcp_wrappers-libs_PORT= ${PORTSDIR}/net/linux${LINUX_BASEPORT_NAME}-tcp_wrappers-libs
tiff_f10_FILE= ${LINUXBASE}/usr/lib/libtiff.so.3.8.2
tiff_c6_FILE= ${LINUXBASE}/usr/lib/libtiff.so.3.9.4
tiff_c6_64_FILE= ${LINUXBASE}/usr/lib64/libtiff.so.3.9.4
tiff_DETECT= ${tiff${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
tiff_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-tiff
tiff_DEPENDS= jpeg
tk85_f10_FILE= ${LINUXBASE}/usr/lib/libtk8.5.so
tk85_c6_FILE= ${LINUXBASE}/usr/lib/libtk8.5.so
tk85_c6_64_FILE= ${LINUXBASE}/usr/lib64/libtk8.5.so
tk85_DETECT= ${tk85${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
tk85_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-tk85
tk85_DEPENDS= xorglibs
xorglibs_f10_FILE= ${LINUXBASE}/usr/lib/libXrandr.so.2.1.0
xorglibs_c6_FILE= ${LINUXBASE}/usr/lib/libXrandr.so.2.2.0
xorglibs_c6_64_FILE= ${LINUXBASE}/usr/lib64/libXrandr.so.2.2.0
xorglibs_DETECT= ${xorglibs${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
xorglibs_PORT= ${PORTSDIR}/x11/linux${LINUX_BASEPORT_NAME}-xorg-libs
xorglibs_DEPENDS= fontconfig
ucl_f10_FILE= ${LINUXBASE}/usr/lib/libucl.so.1
ucl_DETECT= ${ucl${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
ucl_PORT= ${PORTSDIR}/archivers/linux${LINUX_BASEPORT_NAME}-ucl
ungif_f10_FILE= ${LINUXBASE}/usr/lib/libgif.so.4.1.3
ungif_DETECT= ${ungif${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
ungif_PORT= ${PORTSDIR}/graphics/linux${LINUX_BASEPORT_NAME}-ungif
upx_f10_FILE= ${LINUXBASE}/usr/bin/upx
upx_DETECT= ${upx${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
upx_PORT= ${PORTSDIR}/archivers/linux${LINUX_BASEPORT_NAME}-upx
upx_DEPENDS= ucl
webauth_f10_FILE= ${LOCALBASE}/bin/linux-nvu
webauth_DETECT= ${webauth${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
webauth_PORT= ${PORTSDIR}/www/linux-${WEB_AUTH}
webauth_DEPENDS= gtk2 atk pango fontconfig
qt47_c6_FILE= ${LINUXBASE}/usr/lib/qt47/libQtCore.so.4.7.2
qt47_c6_64_FILE= ${LINUXBASE}/usr/lib64/qt47/libQtCore.so.4.7.2
qt47_DETECT= ${qt47${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
qt47_PORT= ${PORTSDIR}/devel/linux${LINUX_BASEPORT_NAME}-qt47
qt47-x11_c6_FILE= ${LINUXBASE}/usr/lib/qt47/libQtGui.so.4.7.2
qt47-x11_c6_64_FILE= ${LINUXBASE}/usr/lib64/qt47/libQtGui.so.4.7.2
qt47-x11_DETECT= ${qt47-x11${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
qt47-x11_PORT= ${PORTSDIR}/x11-toolkits/linux${LINUX_BASEPORT_NAME}-qt47-x11
qt47-webkit_c6_FILE= ${LINUXBASE}/usr/lib/qt47/libQtWebKit.so.4.7.2
qt47-webkit_c6_64_FILE= ${LINUXBASE}/usr/lib64/qt47/libQtWebKit.so.4.7.2
qt47-webkit_DETECT= ${qt47-webkit${LINUX_DIST_SUFFIX:S/-/_/}_FILE}
qt47-webkit_PORT= ${PORTSDIR}/www/linux${LINUX_BASEPORT_NAME}-qt47-webkit
# End component definition section
# Let's check if components from USE_LINUX_APPS exist at _LINUX_APPS_ALL
. for component in ${USE_LINUX_APPS}
. if ${_LINUX_APPS_ALL:M${component}}==""
IGNORE= bsd.linux-apps.mk test failed: Invalid component USE_LINUX_APPS=${component}
. endif
. endfor
# Let's check if components from USE_LINUX_APPS have corresponding <app>_DETECT
# i.e. if a corresponding <app>_FILE defined for given LINUX_DIST_SUFFIX
. for component in ${USE_LINUX_APPS}
. if ${${component}_DETECT}==""
. if defined(${component}${LINUX_DIST_SUFFIX:S/-/_/}_FILE)
IGNORE= bsd.linux-apps.mk test failed: The component ${component} is empty for LINUX_DIST_SUFFIX=${LINUX_DIST_SUFFIX} (the corresponding variable ${component}${LINUX_DIST_SUFFIX:S/-/_/}_FILE is empty)
. else
IGNORE= bsd.linux-apps.mk test failed: The component ${component} is not defined for LINUX_DIST_SUFFIX=${LINUX_DIST_SUFFIX} (the corresponding variable ${component}${LINUX_DIST_SUFFIX:S/-/_/}_FILE is not defined). This usually means that the current port should be used with non default linux base and/or infrastructure port(s)
. endif
. endif
. endfor
# Recursively expand all dependencies for each app at _LINUX_APPS_ALL
. for component in ${_LINUX_APPS_ALL}
. for subcomponent in ${${component}_DEPENDS}
${component}_DEPENDS+=${${subcomponent}_DEPENDS}
. endfor
. endfor
# Use just expanded dependencies (<app>_DEPENDS) to expand USE_LINUX_APPS
. for component in ${USE_LINUX_APPS}
_USE_LINUX_APPS+=${${component}_DEPENDS} ${component}
. endfor
# Set dependencies for _USE_LINUX_APPS which exists at _LINUX_APPS_ALL
. for component in ${_LINUX_APPS_ALL}
. if ${_USE_LINUX_APPS:M${component}}!=""
. if defined(${component}${LINUX_DIST_SUFFIX:S/-/_/}_FILE)
RUN_DEPENDS+= ${${component}_DETECT}:${${component}_PORT}
. endif
. endif
. endfor
.endif
Reference in New Issue View Git Blame Copy Permalink