mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-03 01:23:49 +00:00
Code Issues Releases Activity
795711ff1b
freebsd-ports/www/squid32/Makefile
Mathieu Arnold bcc4614ebb Fixup pkgnames. 
PR:		ports/184440, ports/184441, ports/184442, ports/184443, ports/184444, ports/184445, ports/184446, ports/184447, ports/184448, ports/184449, ports/184450
Submitted by:	mat
Approved by:	portmgr (bapt)
2013-12-05 11:10:49 +00:00

518 lines
16 KiB
Makefile
Raw Blame History

# Created by: Thomas-Martin Seck <tmseck@FreeBSD.org>
# $FreeBSD$
PORTNAME= squid
PORTVERSION= 3.2.${SQUID_STABLE_VER}
CATEGORIES= www ipv6
MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
http://mirrors.ccs.neu.edu/Squid/ \
ftp://ftp.fu-berlin.de/unix/www/squid/squid/ \
ftp://ftp.nl.uu.net/pub/unix/www/squid/ \
ftp://ftp.solnet.ch/mirror/squid/ \
ftp://ftp.ntua.gr/pub/www/Squid/squid/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid,} \
http://www.squid-cache.org/Versions/v3/3.2/ \
http://www2.us.squid-cache.org/Versions/v3/3.2/ \
http://www3.us.squid-cache.org/Versions/v3/3.2/ \
http://www1.at.squid-cache.org/Versions/v3/3.2/ \
http://www.eu.squid-cache.org/Versions/v3/3.2/ \
http://www1.ie.squid-cache.org/Versions/v3/3.2/ \
http://www1.jp.squid-cache.org/Versions/v3/3.2/ \
http://www1.za.squid-cache.org/Versions/v3/3.2/
MASTER_SITE_SUBDIR= squid
DIST_SUBDIR= squid3.2
PKGNAMESUFFIX= 32
PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \
http://www2.us.squid-cache.org/%SUBDIR%/ \
http://www3.us.squid-cache.org/%SUBDIR%/ \
http://www1.at.squid-cache.org/%SUBDIR%/ \
http://www.eu.squid-cache.org/%SUBDIR%/ \
http://www1.ie.squid-cache.org/%SUBDIR%/ \
http://www1.jp.squid-cache.org/%SUBDIR%/ \
http://www2.tw.squid-cache.org/%SUBDIR%/
PATCH_SITE_SUBDIR= Versions/v3/3.2/changesets
PATCHFILES= #empty
MAINTAINER= tmseck@FreeBSD.org
COMMENT= HTTP Caching Proxy
LICENSE= GPLv2
LICENSE_FILE= ${WRKSRC}/COPYING
SQUID_STABLE_VER= 13
CONFLICTS_INSTALL= squid-2.[0-9].* squid33-* cacheboy-[0-9]* lusca-head-[0-9]*
USES= perl5
GNU_CONFIGURE= yes
USE_BZIP2= yes
USE_RC_SUBR= squid
USERS= squid
GROUPS= squid
MAN1= squidclient.1
MAN8= cachemgr.cgi.8 squid.8
docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS= ${docs:T}
PORTEXAMPLES= *
SUB_FILES+= pkg-install pkg-message
OPTIONS_DEFINE= ARP_ACL AUTH_KERB AUTH_LDAP AUTH_NIS AUTH_SASL AUTH_SMB \
CACHE_DIGESTS DEBUG DELAY_POOLS DNS_HELPER ECAP ESI \
FOLLOW_XFF FS_AUFS FS_COSS HTCP ICAP ICMP IDENT IPV6 KQUEUE \
LARGEFILE SNMP SSL SSL_CRTD STACKTRACES STRICT_HTTP \
TP_IPF TP_IPFW TP_PF VIA_DB WCCP WCCPV2 DOCS EXAMPLES
ARP_ACL_DESC= Enable ARP/MAC/EUI based authentification
AUTH_KERB_DESC= Install Kerberos authentication helpers
AUTH_LDAP_DESC= Install LDAP authentication helpers
AUTH_NIS_DESC= Install NIS/YP authentication helpers
AUTH_SASL_DESC= Install SASL authentication helpers
AUTH_SMB_DESC= Install SMB auth. helpers (req. Samba)
CACHE_DIGESTS_DESC= Use cache digests
DEBUG_DESC= Build with extended debugging support
DELAY_POOLS_DESC= Enable delay pools (bandwidth limiting)
DNS_HELPER_DESC= Use external dnsserver processes for DNS
ECAP_DESC= Enable loadable content adaptation modules
ESI_DESC= Enable support for ESI
FOLLOW_XFF_DESC= Enable support for the X-Following-For header
FS_AUFS_DESC= Enable AUFS (async-io) support
FS_COSS_DESC= Enable COSS (not stable yet)
HTCP_DESC= Enable HTCP support
ICAP_DESC= Enable the ICAP client
ICMP_DESC= Enable ICMP pinging and network measurement
IDENT_DESC= Enable Ident lookups (RFC 931)
KQUEUE_DESC= Enable kqueue(2) support
LARGEFILE_DESC= Support large (>2GB) cache and log files
SNMP_DESC= Enable SNMP support
SSL_CRTD_DESC= Use ssl_crtd to handle SSL cert requests
SSL_DESC= Enable SSL gatewaying support
STACKTRACES_DESC= Enable automatic backtraces on fatal errors
STRICT_HTTP_DESC= Make Squid strictly HTTP compliant
TP_IPFW_DESC= Enable transparent proxying with IPFW
TP_IPF_DESC= Enable transparent proxying with IPFilter
TP_PF_DESC= Enable transparent proxying with PF
VIA_DB_DESC= Enable Forward/Via database
WCCPV2_DESC= Enable Web Cache Coordination Protocol v2
WCCP_DESC= Enable Web Cache Coordination Protocol
OPTIONS_DEFAULT= AUTH_KERB AUTH_NIS FS_AUFS HTCP IDENT KQUEUE \
SNMP WCCP WCCPV2
ECAP_USES= pkgconfig:build
etc_files= squid/cachemgr.conf.default \
squid/errorpage.css.default \
squid/mib.txt \
squid/mime.conf.default \
squid/msntauth.conf.default \
squid/squid.conf.default \
squid/squid.conf.documented
icon_silk_files= application.png arrow_up.png bomb.png box.png \
bricks.png bullet_red.png cd.png chart_line.png \
compress.png computer_link.png css.png cup.png \
database.png database_table.png drive_disk.png \
film.png film_key.png folder.png folder_table.png \
image.png information.png layers.png layout.png \
link.png music.png package.png package_go.png \
page_code.png page_excel.png page_green.png \
page_white.png page_white_acrobat.png page_white_c.png \
page_white_cplusplus.png page_white_flash.png \
page_white_magnify.png page_white_picture.png \
page_white_powerpoint.png page_white_stack.png \
page_white_text.png page_world.png \
page_white_word.png page_white_zip.png photo.png \
picture.png plugin.png plugin_add.png script.png \
script_gear.png script_palette.png
error_files= ERR_ACCESS_DENIED ERR_ACL_TIME_QUOTA_EXCEEDED \
ERR_AGENT_CONFIGURE ERR_AGENT_WPAD \
ERR_CACHE_ACCESS_DENIED \
ERR_CACHE_MGR_ACCESS_DENIED ERR_CONFLICT_HOST \
ERR_CANNOT_FORWARD ERR_CONNECT_FAIL \
ERR_DIR_LISTING ERR_DNS_FAIL \
ERR_ESI ERR_FORWARDING_DENIED \
ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
ERR_GATEWAY_FAILURE \
ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
ERR_ONLY_IF_CACHED_MISS ERR_PRECONDITION_FAILED \
ERR_READ_ERROR ERR_READ_TIMEOUT \
ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \
ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \
ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT \
error-details.txt
error_dirs= af ar az bg ca cs da de el en es et fa fi fr he hu hy id it \
ja ko lt lv ms nl oc pl pt pt-br ro ru sk sl sr-cyrl sr-latn \
sv \
th tr uk uz \
vi zh-cn zh-tw \
templates
error_dir_links= ar-ae ar-bh ar-dz ar-eg ar-iq ar-jo ar-kw ar-lb \
ar-ly ar-ma ar-om ar-qa ar-sa ar-sy ar-tn ar-ye \
az-az bg-bg cs-cz da-dk \
de-at de-ch de-de de-li de-lu \
el-gr \
en-au en-bz en-ca en-gb en-ie en-in en-jm en-nz \
en-ph en-sg en-tt en-uk en-us en-za en-zw \
es-ar es-bo es-cl es-co es-cr es-do es-ec es-es \
es-gt es-hn es-mx es-ni es-pa es-pe es-pr es-py \
es-sv es-uy es-ve \
et-ee \
fa-fa fa-ir fi-fi \
fr-be fr-ca fr-ch fr-fr fr-lu fr-mc \
he-il hu-hu hy-am hy-armn id-id it-ch it-it \
ja-jp ko-kp ko-kr lt-lt lv-lv ms-my nl-nl \
pl-pl pt-pt ro-md ro-ro ru-ru \
sk-sk sl-si sr sr-latn-cs sr-sp sv-fi sv-se \
th-th tr-tr uk-ua vi-vn zh-hk zh-mo zh-sg
libexec= cachemgr.cgi \
diskd \
helper-mux.pl
.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+= unlinkd
.endif
sbin= purge squidclient squid
CONFIGURE_ARGS= --with-default-user=squid \
--bindir=${PREFIX}/sbin \
--sbindir=${PREFIX}/sbin \
--datadir=${ETCDIR} \
--libexecdir=${PREFIX}/libexec/squid \
--localstatedir=/var \
--sysconfdir=${ETCDIR} \
--with-logdir=/var/log/squid \
--with-pidfile=/var/run/squid/squid.pid \
--with-swapdir=/var/squid/cache/squid \
--enable-auth \
--enable-build-info \
--enable-loadable-modules \
--enable-removal-policies="lru heap" \
--disable-epoll \
--disable-linux-netfilter \
--disable-linux-tproxy \
--disable-translation
NO_STAGE= yes
.include <bsd.port.pre.mk>
.if ${CC:T:Mclang} == "clang" || ${CXX:T:Mclang++} == "clang++" || ${OSVERSION} >= 1000024
CXXFLAGS+= -Wno-unused-private-field
.endif
# Authentication methods and modules:
basic_auth= DB MSNT MSNT-multi-domain NCSA PAM POP3 RADIUS \
fake getpwnam
digest_auth= file
external_acl= file_userip unix_group
ntlm_auth= fake smb_lm
libexec+= basic_db_auth \
basic_fake_auth \
basic_getpwnam_auth \
basic_ncsa_auth \
basic_msnt_auth \
basic_msnt_multi_domain_auth \
basic_pam_auth \
basic_pop3_auth \
basic_radius_auth \
digest_file_auth \
ext_file_userip_acl \
ext_unix_group_acl \
ntlm_fake_auth \
ntlm_smb_lm_auth
MAN8+= basic_getpwnam_auth.8 basic_ncsa_auth.8 basic_pam_auth.8 \
basic_radius_auth.8 basic_db_auth.8 \
digest_file_auth.8 \
ext_file_userip_acl.8 ext_unix_group_acl.8
.if ${PORT_OPTIONS:MAUTH_LDAP}
USE_OPENLDAP= yes
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= basic_ldap_auth.8 ext_ldap_group_acl.8
basic_auth+= LDAP
external_acl+= LDAP_group
libexec+= basic_ldap_auth ext_ldap_group_acl
.endif
.if ${PORT_OPTIONS:MAUTH_SASL}
LIB_DEPENDS+= sasl2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+= -I${LOCALBASE}/include
CPPFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= basic_sasl_auth.8
basic_auth+= SASL
libexec+= basic_sasl_auth
.endif
.if ${PORT_OPTIONS:MAUTH_SMB}
BUILD_DEPENDS+= smbclient:${PORTSDIR}/net/samba36
RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba36
basic_auth+= SMB
external_acl+= wbinfo_group
libexec+= basic_smb_auth basic_smb_auth.sh \
ext_wbinfo_group_acl
MAN8+= ext_wbinfo_group_acl.8
.endif
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_NIS} && !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+= NIS
libexec+= basic_nis_auth
.endif
# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too:
.if ${PORT_OPTIONS:MAUTH_KERB} && !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
negotiate_auth= kerberos wrapper
libexec+= negotiate_kerberos_auth negotiate_kerberos_auth_test \
negotiate_wrapper_auth
MAN8+= negotiate_kerberos_auth.8
# the kerberos_ldap_group external helper depends on LDAP and SASL:
.if ${PORT_OPTIONS:MAUTH_LDAP} && ${PORT_OPTIONS:MAUTH_SASL}
external_acl+= kerberos_ldap_group
libexec+= ext_kerberos_ldap_group_acl \
cert_tool
# XXX: this manpage is present in Squid's source but is not being
# built/installed yet (Squid 3.2.3 as at 11/2012).
#MAN8+= ext_kerberos_ldap_group_acl.8
.endif
.else
negotiate_auth= none
.endif
CONFIGURE_ARGS+= --enable-auth-basic="${basic_auth}" \
--enable-auth-digest="${digest_auth}" \
--enable-external-acl-helpers="${external_acl}" \
--enable-auth-negotiate="${negotiate_auth}" \
--enable-auth-ntlm="${ntlm_auth}"
# Storage schemes:
storage_schemes= diskd rock ufs
diskio_modules= AIO Blocking DiskDaemon IpcIo Mmapped
.if ${PORT_OPTIONS:MFS_AUFS}
storage_schemes+= aufs
diskio_modules+= DiskThreads
# Only document switching from libpthread to libthr using libmap.conf
# where lipthread is still the default threading library:
.if ${OSVERSION} < 700041
EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
.endif
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS,
# e.g. SQUID_CONFIGURE_ARGS=--with-aufs-threads=N
LDFLAGS+= -pthread
.else
CONFIGURE_ARGS+= --without-pthreads
.endif
.if ${PORT_OPTIONS:MFS_COSS}
storage_schemes+= coss
.endif
CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}"
CONFIGURE_ARGS+= --enable-disk-io="${diskio_modules}"
# Log daemon helpers:
logdaemon_helpers= file
CONFIGURE_ARGS+= --enable-log-daemon-helpers="${logdaemon_helpers}"
libexec+= log_file_daemon
# Rewrite helpers:
rewrite_helpers= fake
CONFIGURE_ARGS+= --enable-url-rewrite-helpers="${rewrite_helpers}"
libexec+= url_fake_rewrite url_fake_rewrite.sh
# Other options set via 'make config':
.if empty(PORT_OPTIONS:MIPV6) || defined(WITHOUT_IPV6)
CONFIGURE_ARGS+= --disable-ipv6
EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.noipv6
.endif
.if ${PORT_OPTIONS:MDELAY_POOLS}
CONFIGURE_ARGS+= --enable-delay-pools
.endif
.if empty(PORT_OPTIONS:MSNMP)
CONFIGURE_ARGS+= --disable-snmp
.endif
.if ${PORT_OPTIONS:MSSL}
# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included.
# This makes it currently impossible to combine this macro with OPTIONS to
# conditionally include OpenSSL support.
# XXX: is this still true with OptionsNG as of 2012-10?
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+= --enable-ssl \
--with-openssl="${OPENSSLBASE}"
CFLAGS+= -I${OPENSSLINC}
LDFLAGS+= -L${OPENSSLLIB}
.endif
.if ${PORT_OPTIONS:MSSL_CRTD}
CONFIGURE_ARGS+= --enable-ssl-crtd
libexec+= ssl_crtd
.endif
.if ${PORT_OPTIONS:MICMP}
CONFIGURE_ARGS+= --enable-icmp
libexec+= pinger
.endif
.if ${PORT_OPTIONS:MDNS_HELPER}
CONFIGURE_ARGS+= --disable-internal-dns
libexec+= dnsserver
.endif
.if empty(PORT_OPTIONS:MHTCP)
CONFIGURE_ARGS+= --disable-htcp
.else
CONFIGURE_ARGS+= --enable-htcp
.endif
.if ${PORT_OPTIONS:MVIA_DB}
CONFIGURE_ARGS+= --enable-forw-via-db
.else
CONFIGURE_ARGS+= --disable-forw-via-db
.endif
.if ${PORT_OPTIONS:MCACHE_DIGESTS}
CONFIGURE_ARGS+= --enable-cache-digests
.else
CONFIGURE_ARGS+= --disable-cache-digests
.endif
.if ${PORT_OPTIONS:MWCCP}
CONFIGURE_ARGS+= --enable-wccp
.else
CONFIGURE_ARGS+= --disable-wccp
.endif
.if ${PORT_OPTIONS:MWCCPV2}
CONFIGURE_ARGS+= --enable-wccpv2
.else
CONFIGURE_ARGS+= --disable-wccpv2
.endif
.if ${PORT_OPTIONS:MSTRICT_HTTP}
CONFIGURE_ARGS+= --disable-http-violations
.endif
.if empty(PORT_OPTIONS:MIDENT)
CONFIGURE_ARGS+= --disable-ident-lookups
.endif
.if ${PORT_OPTIONS:MARP_ACL}
CONFIGURE_ARGS+= --enable-eui
.else
CONFIGURE_ARGS+= --disable-eui
.endif
.if ${PORT_OPTIONS:MTP_IPFW}
CONFIGURE_ARGS+= --enable-ipfw-transparent
.else
CONFIGURE_ARGS+= --disable-ipfw-transparent
.endif
.if ${PORT_OPTIONS:MTP_PF}
CONFIGURE_ARGS+= --enable-pf-transparent
.else
CONFIGURE_ARGS+= --disable-pf-transparent
.endif
.if ${PORT_OPTIONS:MTP_IPF}
CONFIGURE_ARGS+= --enable-ipf-transparent
.else
CONFIGURE_ARGS+= --disable-ipf-transparent
.endif
.if ${PORT_OPTIONS:MFOLLOW_XFF}
CONFIGURE_ARGS+= --enable-follow-x-forwarded-for
.else
CONFIGURE_ARGS+= --disable-follow-x-forwarded-for
.endif
.if ${PORT_OPTIONS:MECAP}
CONFIGURE_ARGS+= --enable-ecap
LIB_DEPENDS+= ecap:${PORTSDIR}/www/libecap
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
.else
CONFIGURE_ARGS+= --disable-ecap
.endif
.if ${PORT_OPTIONS:MICAP}
CONFIGURE_ARGS+= --enable-icap-client
.else
CONFIGURE_ARGS+= --disable-icap-client
.endif
.if ${PORT_OPTIONS:MESI}
CONFIGURE_ARGS+= --enable-esi
LIB_DEPENDS+= expat:${PORTSDIR}/textproc/expat2 \
xml2:${PORTSDIR}/textproc/libxml2
CFLAGS+= -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2
LDFLAGS+= -L${LOCALBASE}/lib
.else
CONFIGURE_ARGS+= --disable-esi
.endif
.if empty(PORT_OPTIONS:MKQUEUE)
# Squid-3's kqueue support is still marked as experimental, so it is not yet
# enabled automatically as in Squid-2. We are explicit about disabling it,
# nonetheless:
CONFIGURE_ARGS+= --disable-kqueue
.else
CONFIGURE_ARGS+= --enable-kqueue
.endif
.if ${PORT_OPTIONS:MLARGEFILE}
CONFIGURE_ARGS+= --with-large-files
.endif
.if ${PORT_OPTIONS:MSTACKTRACES}
CONFIGURE_ARGS+= --enable-stacktraces
CFLAGS+= -g
STRIP=
.endif
.if ${PORT_OPTIONS:MDEBUG} || defined(WITH_DEBUG)
CONFIGURE_ARGS+= --disable-optimizations --enable-debug-cbdata
WITH_DEBUG?= yes
.endif
# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS}
PLIST_DIRS= %%ETCDIR%%/icons/silk %%ETCDIR%%/icons libexec/squid
PLIST_FILES= ${etc_files:S,^,etc/,} \
%%ETCDIR%%/icons/SN.png \
${icon_silk_files:S,^,%%ETCDIR%%/icons/silk/,} \
${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
PLIST_FILES+= %%ETCDIR%%/errors/COPYRIGHT %%ETCDIR%%/errors/TRANSLATORS
.for d in ${error_dirs}
PLIST_DIRS+= %%ETCDIR%%/errors/${d}
PLIST_FILES+= ${error_files:S,^,%%ETCDIR%%/errors/${d}/,}
.endfor
PLIST_FILES+= ${error_dir_links:S,^,%%ETCDIR%%/errors/,}
PLIST_DIRS+= %%ETCDIR%%/errors
PLIST_DIRSTRY+= %%ETCDIR%%
post-patch:
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
${WRKSRC}/src/cf.data.pre
pre-install:
# Prevent installation of .orig files by deleting them.
@${FIND} ${WRKSRC} -name '*.bak' -delete
@${FIND} ${WRKSRC} -name '*.orig' -delete
pre-su-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
post-install:
.if ${PORT_OPTIONS:MEXAMPLES}
@${MKDIR} ${EXAMPLESDIR}
${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
.endif
.if ${PORT_OPTIONS:MICMP}
${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
${CHGRP} squid ${PREFIX}/libexec/squid/pinger
.endif
.if ${PORT_OPTIONS:MDOCS}
@${MKDIR} ${DOCSDIR}
cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
@${SETENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
@${ECHO_CMD} ""
@${CAT} ${PKGMESSAGE}
@${ECHO_CMD} ""
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink