mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-04 01:48:54 +00:00
Code Issues Releases Activity
8a4833dd0d
freebsd-ports/Mk/bsd.gecko.mk
Jan Beich 8af65d5d19 gecko: phase out GStreamer support 
H.264 is decoded by FFmpeg directly since Firefox 43.0. GStreamer
doesn't support DASH and no longer used by default since r397984
brings libavcodec.so.

https://bugzilla.mozilla.org/show_bug.cgi?id=1234092
2015-12-28 18:18:03 +00:00

631 lines
19 KiB
Makefile
Raw Blame History

#-*- tab-width: 4; -*-
# ex:ts=4
#
# Date created: 12 Nov 2005
# Whom: Michael Johnson <ahze@FreeBSD.org>
#
# $FreeBSD$
#
# 4 column tabs prevent hair loss and tooth decay!
# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
# and porters to support any available gecko backend without needing to build
# many conditional tests. ${USE_GECKO} is the list of backends that your port
# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
# Users set ${WITH_GECKO} to the list of gecko backends they want on their
# system.
.if defined(USE_GECKO)
.if !defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
Gecko_Pre_Include= bsd.gecko.mk
# This file contains some reusable components for mozilla ports. It's of
# use primarily to apps from the mozilla project itself (such as Firefox,
# Thunderbird, etc.), and probably won't be of use for gecko-based ports
# like epiphany, galeon, etc.
#
# You need to make sure to add USE_GECKO=gecko to for your port can uses
# one of these options below.
#
# Ports can use the following:
#
# USE_MOZILLA By default, it enables every system dependency
# listed in '_ALL_DEPENDS'. If your port doesn't
# need one of those then you can use '-' like
# 'USE_MOZILLA= -png -vpx' to subtract the
# dependencies. Experimental deps use '+' like
# 'USE_MOZILLA= +speex +theora'.
#
# MOZILLA_PLIST_DIRS List of directories to descend into when installing
# and creating the plist
#
# MOZ_PIS_SCRIPTS List of scripts residing in ${FILESDIR} to be
# filtered through MOZCONFIG_SED and installed along
# with our Pluggable Init Scripts (PIS)
#
# MOZ_SED_ARGS sed(1) commands through which MOZ_PIS_SCRIPTS are
# filtered. There is a default set defined here, so
# you probably want to add to MOZ_SED_ARGS rather
# than clobber it
#
# MOZ_OPTIONS configure arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# CONFIGURE_ARGS+=${MOZ_OPTIONS}
#
# MOZ_MK_OPTIONS The make(1) arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# MAKE_ARGS+=${MOZ_MK_OPTIONS}
#
# MOZ_EXPORT Environment variables for the build process (added
# to .mozconfig). If NOMOZCONFIG is defined, you
# probably want to set MAKE_ENV+=${MOZ_EXPORT}
#
# MOZ_CHROME A variable for the --enable-chrome-format= in
# CONFIGURE_ARGS. The default is omni.
#
# MOZ_TOOLKIT A variable for the --enable-default-toolkit= in
# CONFIGURE_ARGS. The default is cairo-gtk2.
#
# MOZ_EXTENSIONS A list of extensions to build
#
# MOZ_PROTOCOLS A list of protocols to build (http, ftp, etc.)
#
# PORT_MOZCONFIG Defaults to ${FILESDIR}/mozconfig.in, but can be
# set to a generic mozconfig included with the port
#
# NOMOZCONFIG Don't drop a customized .mozconfig into the build
# directory. Options will have to be specified in
# CONFIGURE_ARGS instead
#
MAINTAINER?= gecko@FreeBSD.org
MOZILLA?= ${PORTNAME}
MOZILLA_VER?= ${PORTVERSION}
MOZILLA_BIN?= ${PORTNAME}-bin
MOZILLA_EXEC_NAME?=${MOZILLA}
MOZ_RPATH?= ${MOZILLA}
USES+= cpe compiler:c++11-lang gmake iconv perl5 pkgconfig \
python:2.7,build desktop-file-utils
CPE_VENDOR?=mozilla
USE_PERL5= build
USE_XORG= xext xrender xt
.if ${MOZILLA} != "libxul"
BUNDLE_LIBS= yes
.endif
MOZILLA_SUFX?= none
MOZSRC?= ${WRKSRC}
WRKSRC?= ${WRKDIR}/mozilla
PLISTF?= ${WRKDIR}/plist_files
MOZ_OBJDIR?= ${WRKSRC}/obj-${CONFIGURE_TARGET}
MOZ_PIS_DIR?= lib/${MOZILLA}/init.d
PORT_MOZCONFIG?= ${FILESDIR}/mozconfig.in
MOZCONFIG?= ${WRKSRC}/.mozconfig
# XXX Not ?= because fmake uses MAKEFILE internally
MAKEFILE= ${WRKSRC}/client.mk
MOZILLA_PLIST_DIRS?= bin lib share/pixmaps share/applications
PKGINSTALL?= ${WRKDIR}/pkg-install
PKGDEINSTALL?= ${WRKDIR}/pkg-deinstall
PKGINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-install.in
PKGDEINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-deinstall.in
MOZ_PKGCONFIG_FILES?= ${MOZILLA}-gtkmozembed ${MOZILLA}-js \
${MOZILLA}-xpcom ${MOZILLA}-plugin
ALL_TARGET?= build
CONFIGURE_TARGET:=${ARCH:C/amd64/x86_64/}-portbld-${OPSYS:tl}${OSREL}
MOZ_EXPORT+= ${CONFIGURE_ENV} \
PERL="${PERL}"
MOZ_OPTIONS+= ${CONFIGURE_TARGET} --prefix="${PREFIX}"
MOZ_MK_OPTIONS+=MOZ_OBJDIR="${MOZ_OBJDIR}"
CPPFLAGS+= -isystem${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib -Wl,-rpath,${PREFIX}/lib/${MOZILLA}
.if ${OPSYS} != DragonFly # XXX xpcshell crash during install
# use jemalloc 3.0.0 (4.0 for firefox 43+) API for stats/tuning
MOZ_EXPORT+= MOZ_JEMALLOC3=1 MOZ_JEMALLOC4=1
.if ${OPSYS} == FreeBSD && ${OSVERSION} >= 1100079
. if ${MOZILLA_VER:R:R} < 43
# system jemalloc 4.0.0 vs. bundled jemalloc 3.6.0-204-gb4acf73
EXTRA_PATCHES+= ${FILESDIR}/extra-patch-bug1125514
. endif
.elif ${OPSYS} != FreeBSD || ${OSVERSION} < 1000012 || ${MOZILLA_VER:R:R} >= 37
MOZ_OPTIONS+= --enable-jemalloc
.endif
.endif # !DragonFly
# Standard depends
_ALL_DEPENDS= cairo event ffi graphite harfbuzz hunspell icu jpeg nspr nss opus png pixman soundtouch sqlite vpx
.if ${PORT_OPTIONS:MINTEGER_SAMPLES}
MOZ_EXPORT+= MOZ_INTEGER_SAMPLES=1
_ALL_DEPENDS+= tremor
.else
_ALL_DEPENDS+= vorbis
.endif
.if ! ${PORT_OPTIONS:MBUNDLED_CAIRO}
cairo_LIB_DEPENDS= libcairo.so:${PORTSDIR}/graphics/cairo
cairo_MOZ_OPTIONS= --enable-system-cairo
.endif
event_LIB_DEPENDS= libevent.so:${PORTSDIR}/devel/libevent2
event_MOZ_OPTIONS= --with-system-libevent
ffi_LIB_DEPENDS= libffi.so:${PORTSDIR}/devel/libffi
ffi_MOZ_OPTIONS= --enable-system-ffi
.if exists(${FILESDIR}/patch-bug847568)
graphite_LIB_DEPENDS= libgraphite2.so:${PORTSDIR}/graphics/graphite2
graphite_MOZ_OPTIONS= --with-system-graphite2
harfbuzz_LIB_DEPENDS= libharfbuzz.so:${PORTSDIR}/print/harfbuzz
harfbuzz_MOZ_OPTIONS= --with-system-harfbuzz
.endif
hunspell_LIB_DEPENDS= libhunspell-1.3.so:${PORTSDIR}/textproc/hunspell
hunspell_MOZ_OPTIONS= --enable-system-hunspell
icu_LIB_DEPENDS= libicui18n.so:${PORTSDIR}/devel/icu
icu_MOZ_OPTIONS= --with-system-icu --with-intl-api
-jpeg_BUILD_DEPENDS=yasm:${PORTSDIR}/devel/yasm
# XXX JCS_EXTENSIONS API is currently disabled by r371283
# XXX Remove files/patch-ijg-libjpeg once -turbo is default
jpeg_USES= jpeg
jpeg_MOZ_OPTIONS= --with-system-jpeg=${LOCALBASE}
nspr_LIB_DEPENDS= libnspr4.so:${PORTSDIR}/devel/nspr
nspr_MOZ_OPTIONS= --with-system-nspr
nss_LIB_DEPENDS= libnss3.so:${PORTSDIR}/security/nss
nss_MOZ_OPTIONS= --with-system-nss
.if exists(${FILESDIR}/patch-z-bug517422)
opus_LIB_DEPENDS= libopus.so:${PORTSDIR}/audio/opus
opus_MOZ_OPTIONS= --with-system-opus
.endif
pixman_LIB_DEPENDS= libpixman-1.so:${PORTSDIR}/x11/pixman
pixman_MOZ_OPTIONS= --enable-system-pixman
png_LIB_DEPENDS= libpng.so:${PORTSDIR}/graphics/png
png_MOZ_OPTIONS= --with-system-png=${LOCALBASE}
.if exists(${FILESDIR}/patch-z-bug517422)
soundtouch_LIB_DEPENDS= libSoundTouch.so:${PORTSDIR}/audio/soundtouch
soundtouch_MOZ_OPTIONS= --with-system-soundtouch
# XXX disabled: bug 913854 not yet upstreamed
speex_LIB_DEPENDS= libspeexdsp.so:${PORTSDIR}/audio/speex
speex_MOZ_OPTIONS= --with-system-speex
.endif
sqlite_LIB_DEPENDS= libsqlite3.so:${PORTSDIR}/databases/sqlite3
sqlite_MOZ_OPTIONS= --enable-system-sqlite
.if exists(${FILESDIR}/patch-z-bug517422)
# XXX disabled: update to 1.2.x or review backported fixes
theora_LIB_DEPENDS= libtheora.so:${PORTSDIR}/multimedia/libtheora
theora_MOZ_OPTIONS= --with-system-theora
tremor_LIB_DEPENDS= libvorbisidec.so:${PORTSDIR}/audio/libtremor
tremor_MOZ_OPTIONS= --with-system-tremor --with-system-ogg
vorbis_LIB_DEPENDS= libvorbis.so:${PORTSDIR}/audio/libvorbis
vorbis_MOZ_OPTIONS= --with-system-vorbis --with-system-ogg
.endif
-vpx_BUILD_DEPENDS= yasm:${PORTSDIR}/devel/yasm
vpx_LIB_DEPENDS= libvpx.so:${PORTSDIR}/multimedia/libvpx
vpx_MOZ_OPTIONS= --with-system-libvpx
.for use in ${USE_MOZILLA}
${use:S/-/_WITHOUT_/}= ${TRUE}
.endfor
.for dep in ${_ALL_DEPENDS} ${USE_MOZILLA:M+*:S/+//}
.if !defined(_WITHOUT_${dep})
BUILD_DEPENDS+= ${${dep}_BUILD_DEPENDS}
LIB_DEPENDS+= ${${dep}_LIB_DEPENDS}
RUN_DEPENDS+= ${${dep}_RUN_DEPENDS}
USES+= ${${dep}_USES}
MOZ_OPTIONS+= ${${dep}_MOZ_OPTIONS}
.else
BUILD_DEPENDS+= ${-${dep}_BUILD_DEPENDS}
.endif
.endfor
# Standard options
MOZ_CHROME?= omni
MOZ_TOOLKIT?= cairo-gtk2
MOZ_OPTIONS+= \
--enable-chrome-format=${MOZ_CHROME} \
--enable-default-toolkit=${MOZ_TOOLKIT} \
--with-pthreads
# Configure options for install
.if !defined(MOZ_EXTENSIONS)
MOZ_OPTIONS+= --enable-extensions=default
.else
MOZ_OPTIONS+= --enable-extensions=${MOZ_EXTENSIONS}
.endif
.if !defined(MOZ_PROTOCOLS)
MOZ_OPTIONS+= --enable-necko-protocols=default
.else
MOZ_OPTIONS+= --enable-necko-protocols=${MOZ_PROTOCOLS}
.endif
# others
MOZ_OPTIONS+= --with-system-zlib \
--with-system-bz2 \
--enable-unified-compilation \
--disable-debug-symbols \
--disable-glibtest \
--disable-gtktest \
--disable-freetypetest \
--disable-installer \
--disable-updater \
--disable-pedantic
# API keys from www/chromium
# http://www.chromium.org/developers/how-tos/api-keys
# Note: these are for FreeBSD use ONLY. For your own distribution,
# please get your own set of keys.
MOZ_EXPORT+= MOZ_GOOGLE_API_KEY=AIzaSyBsp9n41JLW8jCokwn7vhoaMejDFRd1mp8 \
MOZ_GOOGLE_OAUTH_API_CLIENTID=996322985003.apps.googleusercontent.com \
MOZ_GOOGLE_OAUTH_API_KEY=IR1za9-1VK0zZ0f_O8MVFicn
.if ${PORT_OPTIONS:MGTK3}
MOZ_TOOLKIT= cairo-gtk3
.endif
.if ${MOZ_TOOLKIT:Mcairo-qt}
# don't use - transparent backgrounds (bug 521582),
USE_MOZILLA+= -cairo # ports/169343
USE_DISPLAY=yes # install
USE_GNOME+= pango
USE_QT5+= qmake_build buildtools_build gui network quick printsupport
MOZ_EXPORT+= HOST_QMAKE="${QMAKE}" HOST_MOC="${MOC}" HOST_RCC="${RCC}"
.elif ${MOZ_TOOLKIT:Mcairo-gtk3}
USE_GNOME+= gtk30
. if ${MOZILLA_VER:R:R} >= 32
USE_GNOME+= gtk20 # bug 624422
. endif
.else # gtk2, cairo-gtk2
USE_GNOME+= gtk20
.endif
.if ${PORT_OPTIONS:MOPTIMIZED_CFLAGS}
CFLAGS+= -O3
MOZ_EXPORT+= MOZ_OPTIMIZE_FLAGS="${CFLAGS:M-O*}"
MOZ_OPTIONS+= --enable-optimize
.else
MOZ_OPTIONS+= --disable-optimize
.endif
.if ${PORT_OPTIONS:MCANBERRA}
RUN_DEPENDS+= libcanberra>0:${PORTSDIR}/audio/libcanberra
.endif
.if ${PORT_OPTIONS:MDBUS}
BUILD_DEPENDS+= libnotify>0:${PORTSDIR}/devel/libnotify
LIB_DEPENDS+= libdbus-glib-1.so:${PORTSDIR}/devel/dbus-glib \
libstartup-notification-1.so:${PORTSDIR}/x11/startup-notification
MOZ_OPTIONS+= --enable-startup-notification
.else
MOZ_OPTIONS+= --disable-dbus --disable-libnotify
.endif
.if ${PORT_OPTIONS:MFFMPEG}
# dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp
RUN_DEPENDS+= ffmpeg>=0.8,1:${PORTSDIR}/multimedia/ffmpeg
.else
MOZ_OPTIONS+= --disable-ffmpeg
.endif
.if ${PORT_OPTIONS:MGSTREAMER}
USE_GSTREAMER1?=good libav
MOZ_OPTIONS+= --enable-gstreamer=1.0
.else
MOZ_OPTIONS+= --disable-gstreamer
.endif
.if ${PORT_OPTIONS:MGCONF}
BUILD_DEPENDS+= ${gconf2_DETECT}:${gconf2_LIB_DEPENDS:C/.*://}
USE_GNOME+= gconf2:build
MOZ_OPTIONS+= --enable-gconf
.else
MOZ_OPTIONS+= --disable-gconf
.endif
.if ${PORT_OPTIONS:MGIO} && ! ${MOZ_TOOLKIT:Mcairo-qt}
MOZ_OPTIONS+= --enable-gio
.else
MOZ_OPTIONS+= --disable-gio
.endif
.if ${PORT_OPTIONS:MGNOMEUI}
BUILD_DEPENDS+= ${libgnomeui_DETECT}:${libgnomeui_LIB_DEPENDS:C/.*://}
USE_GNOME+= libgnomeui:build
MOZ_OPTIONS+= --enable-gnomeui
.else
MOZ_OPTIONS+= --disable-gnomeui
.endif
.if ${PORT_OPTIONS:MLIBPROXY}
LIB_DEPENDS+= libproxy.so:${PORTSDIR}/net/libproxy
MOZ_OPTIONS+= --enable-libproxy
.else
MOZ_OPTIONS+= --disable-libproxy
.endif
.if ${PORT_OPTIONS:MPGO}
USES:= compiler:gcc-c++11-lib ${USES:Ncompiler*c++11*}
USE_DISPLAY=yes
ALL_TARGET= profiledbuild
MOZ_EXPORT+=MOZ_OPTIMIZE_FLAGS="-Os" MOZ_PGO_OPTIMIZE_FLAGS="${CFLAGS:M-O*}"
.endif
.if ${PORT_OPTIONS:MALSA}
LIB_DEPENDS+= libasound.so:${PORTSDIR}/audio/alsa-lib
RUN_DEPENDS+= ${LOCALBASE}/lib/alsa-lib/libasound_module_pcm_oss.so:${PORTSDIR}/audio/alsa-plugins
MOZ_OPTIONS+= --enable-alsa
.endif
.if ${PORT_OPTIONS:MPULSEAUDIO}
. if ${PORT_OPTIONS:MALSA}
BUILD_DEPENDS+= pulseaudio>0:${PORTSDIR}/audio/pulseaudio
. else
# pull pulse package if we cannot fallback to another backend
LIB_DEPENDS+= libpulse.so:${PORTSDIR}/audio/pulseaudio
. endif
MOZ_OPTIONS+= --enable-pulseaudio
.else
MOZ_OPTIONS+= --disable-pulseaudio
.endif
.if ${PORT_OPTIONS:MDEBUG}
MOZ_OPTIONS+= --enable-debug --disable-release
STRIP= # ports/184285
.else
MOZ_OPTIONS+= --disable-debug --enable-release
.endif
.if ${PORT_OPTIONS:MDTRACE}
MOZ_OPTIONS+= --enable-dtrace
. if ${OPSYS} == FreeBSD && ${OSVERSION} < 1100061
LIBS+= -lelf
. endif
STRIP=
.else
MOZ_OPTIONS+= --disable-dtrace
.endif
.if ${MOZILLA_VER:R:R} < 40
. if ${PORT_OPTIONS:MLOGGING} || ${PORT_OPTIONS:MDEBUG}
MOZ_OPTIONS+= --enable-logging
. else
MOZ_OPTIONS+= --disable-logging
. endif
.endif
.if ${PORT_OPTIONS:MPROFILE}
MOZ_OPTIONS+= --enable-profiling
STRIP=
.else
MOZ_OPTIONS+= --disable-profiling
.endif
.if ${PORT_OPTIONS:MTEST}
USE_XORG+= xscrnsaver
MOZ_OPTIONS+= --enable-tests
.else
MOZ_OPTIONS+= --disable-tests
.endif
.if !defined(STRIP) || ${STRIP} == ""
MOZ_OPTIONS+= --disable-strip --disable-install-strip
.else
MOZ_OPTIONS+= --enable-strip --enable-install-strip
.endif
# _MAKE_JOBS is only available after bsd.port.post.mk, thus cannot be
# used in .mozconfig. And client.mk automatically uses -jN where N
# is what multiprocessing.cpu_count() returns.
.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
MAKE_JOBS_NUMBER= 1
.endif
.if defined(MAKE_JOBS_NUMBER)
MOZ_MAKE_FLAGS+=-j${MAKE_JOBS_NUMBER}
.endif
.if defined(MOZ_MAKE_FLAGS)
MOZ_MK_OPTIONS+=MOZ_MAKE_FLAGS="${MOZ_MAKE_FLAGS}"
.endif
MOZ_SED_ARGS+= -e's|@CPPFLAGS@|${CPPFLAGS}|g' \
-e 's|@CFLAGS@|${CFLAGS}|g' \
-e 's|@LDFLAGS@|${LDFLAGS}|g' \
-e 's|@LIBS@|${LIBS}|g' \
-e 's|@LOCALBASE@|${LOCALBASE}|g' \
-e 's|@PERL@|${PERL}|g' \
-e 's|@MOZDIR@|${PREFIX}/lib/${MOZILLA}|g' \
-e 's|%%PREFIX%%|${PREFIX}|g' \
-e 's|%%CFLAGS%%|${CFLAGS}|g' \
-e 's|%%LDFLAGS%%|${LDFLAGS}|g' \
-e 's|%%LIBS%%|${LIBS}|g' \
-e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
-e 's|%%PERL%%|${PERL}|g' \
-e 's|%%MOZILLA%%|${MOZILLA}|g' \
-e 's|%%MOZILLA_BIN%%|${MOZILLA_BIN}|g' \
-e 's|%%MOZDIR%%|${PREFIX}/lib/${MOZILLA}|g'
MOZCONFIG_SED?= ${SED} ${MOZ_SED_ARGS}
.if ${ARCH} == amd64
. if ${USE_MOZILLA:M-nss}
USE_BINUTILS= # intel-gcm.s
CFLAGS+= -B${LOCALBASE}/bin
LDFLAGS+= -B${LOCALBASE}/bin
. endif
.elif ${ARCH:Mpowerpc*}
USES:= compiler:gcc-c++11-lib ${USES:Ncompiler*c++11*}
. if ${ARCH} == "powerpc64"
MOZ_EXPORT+= UNAME_m="${ARCH}"
CFLAGS+= -mminimal-toc
. endif
.elif ${ARCH} == "sparc64"
# Work around miscompilation/mislinkage of the sCanonicalVTable hacks.
MOZ_OPTIONS+= --disable-v1-string-abi
.endif
.else # bsd.port.post.mk
pre-extract: gecko-pre-extract
gecko-pre-extract:
.if ${PORT_OPTIONS:MPGO}
@${ECHO} "*****************************************************************"
@${ECHO} "**************************** attention **************************"
@${ECHO} "*****************************************************************"
@${ECHO} "To build ${MOZILLA} with PGO support you need a running X server and"
@${ECHO} " build this port with an user who could access the X server! "
@${ECHO} ""
@${ECHO} "During the build a ${MOZILLA} instance will start and run some test."
@${ECHO} " Do not interrupt or close ${MOZILLA} during this tests! "
@${ECHO} "*****************************************************************"
@sleep 10
.endif
post-patch: gecko-post-patch gecko-moz-pis-patch
gecko-post-patch:
.if exists(${PKGINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGINSTALL_INC} > ${PKGINSTALL}
.endif
.if exists(${PKGDEINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGDEINSTALL_INC} > ${PKGDEINSTALL}
.endif
@${RM} -f ${MOZCONFIG}
.if !defined(NOMOZCONFIG)
@if [ -e ${PORT_MOZCONFIG} ] ; then \
${MOZCONFIG_SED} < ${PORT_MOZCONFIG} >> ${MOZCONFIG} ; \
fi
.for arg in ${MOZ_OPTIONS}
@${ECHO_CMD} ac_add_options ${arg:Q} >> ${MOZCONFIG}
.endfor
.for arg in ${MOZ_MK_OPTIONS}
@${ECHO_CMD} mk_add_options ${arg:Q} >> ${MOZCONFIG}
.endfor
.for var in ${MOZ_EXPORT}
@${ECHO_CMD} export ${var:Q} >> ${MOZCONFIG}
.endfor
.endif # .if !defined(NOMOZCONFIG)
.if exists(${MOZSRC}/build/unix/mozilla-config.in)
@${REINPLACE_CMD} -e 's/%{idldir}/%idldir%/g ; \
s|"%FULL_NSPR_CFLAGS%"|`nspr-config --cflags`|g ; \
s|"%FULL_NSPR_LIBS%"|`nspr-config --libs`|g' \
${MOZSRC}/build/unix/mozilla-config.in
.endif
.if ${USE_MOZILLA:M-nspr}
@${ECHO_MSG} "===> Applying NSPR patches"
@for i in ${.CURDIR}/../../devel/nspr/files/patch-*; do \
${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/nsprpub < $$i; \
done
.endif
.if ${USE_MOZILLA:M-nss}
@${ECHO_MSG} "===> Applying NSS patches"
@for i in ${.CURDIR}/../../security/nss/files/patch-*; do \
${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/security/nss < $$i; \
done
.endif
@for f in \
${WRKSRC}/directory/c-sdk/config/FreeBSD.mk \
${WRKSRC}/directory/c-sdk/configure \
${MOZSRC}/security/coreconf/FreeBSD.mk \
${MOZSRC}/js/src/Makefile.in \
${MOZSRC}/js/src/configure \
${MOZSRC}/configure \
${WRKSRC}/configure; do \
if [ -f $$f ] ; then \
${REINPLACE_CMD} -Ee 's|-lc_r|-pthread|g ; \
s|-l?pthread|-pthread|g ; \
s|echo aout|echo elf|g ; \
s|/usr/X11R6|${LOCALBASE}|g' \
$$f; \
fi; \
done
@if [ -f ${WRKSRC}/config/baseconfig.mk ] ; then \
${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
${WRKSRC}/config/baseconfig.mk; \
fi
@${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
${MOZSRC}/config/baseconfig.mk
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g ; \
s|%%LOCALBASE%%|${LOCALBASE}|g' \
${MOZSRC}/build/unix/run-mozilla.sh
@${REINPLACE_CMD} -e 's|/usr/local/netscape|${LOCALBASE}|g ; \
s|/usr/local/lib/netscape|${LOCALBASE}/lib|g' \
${MOZSRC}/xpcom/io/SpecialSystemDirectory.cpp
@${REINPLACE_CMD} -e 's|/etc|${PREFIX}&|g' \
${MOZSRC}/xpcom/build/nsXPCOMPrivate.h
@${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
-e 's|mozilla/plugins|browser_plugins|g' \
-e 's|share/mozilla/extensions|lib/xpi|g' \
${MOZSRC}/xpcom/io/nsAppFileLocationProvider.cpp \
${MOZSRC}/toolkit/xre/nsXREDirProvider.cpp
@${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${MOZSRC}/extensions/spellcheck/hunspell/*/mozHunspell.cpp
# handles mozilla pis scripts.
gecko-moz-pis-patch:
.for moz in ${MOZ_PIS_SCRIPTS}
@${MOZCONFIG_SED} < ${FILESDIR}/${moz} > ${WRKDIR}/${moz}
.endfor
do-configure: gecko-do-configure
gecko-do-configure:
@(if ! ${CONFIGURE_ENV} ${DO_MAKE_BUILD} configure; then \
${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
(${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
${FALSE}; \
fi)
pre-install: gecko-moz-pis-pre-install
post-install-script: gecko-create-plist
gecko-create-plist: port-post-install
.if !target(port-post-install)
port-post-install:
@${DO_NADA}
.endif
gecko-create-plist:
# Create the plist
${RM} -f ${PLISTF}
.for dir in ${MOZILLA_PLIST_DIRS}
@cd ${STAGEDIR}${PREFIX}/${dir} && ${FIND} -H -s * ! -type d | \
${SED} -e 's|^|${dir}/|' >> ${PLISTF}
.endfor
${CAT} ${PLISTF} | ${SORT} >> ${TMPPLIST}
gecko-moz-pis-pre-install:
.if defined(MOZ_PIS_SCRIPTS)
${MKDIR} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR}
.for moz in ${MOZ_PIS_SCRIPTS}
${INSTALL_SCRIPT} ${WRKDIR}/${moz} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR}
.endfor
.endif
.endif
.endif
# HERE THERE BE TACOS -- adamw
Reference in New Issue View Git Blame Copy Permalink