1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-07 02:06:57 +00:00
freebsd-ports/security/openssh-portable/Makefile
Sergey A. Osokin 2a56663170 Fix build with WITH_LPK support for amd64 by change extra patches order.
Do not bump PORTREVISION.

Submitted by:	Fedor Dikarev aka fe at rambler dash co dot ru
Spotted by:	maxim
Approved by:	maintainer unavailable, i.e.
		$ whois dindin.ru | grep ^state
		state:      REGISTERED, NOT DELEGATED
PR:		amd64/134706
2009-05-19 10:13:28 +00:00

269 lines
7.9 KiB
Makefile

# New ports collection makefile for: openssh
# Date created: 18 Mar 1999
# Whom: dwcjr@inethouston.net
#
# $FreeBSD$
#
PORTNAME= openssh
DISTVERSION= 5.2p1
PORTREVISION= 1
PORTEPOCH= 1
CATEGORIES= security ipv6
.if defined(OPENSSH_SNAPSHOT)
MASTER_SITES= http://www.mindrot.org/openssh_snap/
.else
MASTER_SITES= ${MASTER_SITE_OPENBSD}
MASTER_SITE_SUBDIR= OpenSSH/portable
.endif
PKGNAMESUFFIX= ${PORTABLE_SUFFIX}${GSSAPI_SUFFIX}${BASE_SUFFIX}
DISTNAME= # empty
MAINTAINER= dindin@dindin.ru
COMMENT= The portable version of OpenBSD's OpenSSH
.if defined(OPENSSH_SNAPSHOT)
PORTREVISION!= date -v-1d +%Y%m%d
NO_CHECKSUM= yes
DISTNAME+= ${PORTNAME}-SNAP-${PORTREVISION}
.else
DISTNAME+= ${PORTNAME}-${DISTVERSION}
.endif
WRKSRC= ${WRKDIR}/${PORTNAME}-${DISTVERSION}
MAN1= sftp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 scp.1 ssh.1
MLINKS= ssh.1 slogin.1
MAN5= moduli.5 ssh_config.5 sshd_config.5
MAN8= sftp-server.8 sshd.8 ssh-keysign.8
CONFLICTS?= openssh-3.* ssh-1.* ssh2-3.*
USE_OPENSSL= yes
GNU_CONFIGURE= yes
CONFIGURE_ARGS= --prefix=${PREFIX} --with-md5-passwords \
--without-zlib-version-check --with-ssl-engine
PRECIOUS= ssh_config sshd_config ssh_host_key ssh_host_key.pub \
ssh_host_rsa_key ssh_host_rsa_key.pub ssh_host_dsa_key \
ssh_host_dsa_key.pub
ETCOLD= ${PREFIX}/etc
PORTABLE_SUFFIX= -portable
SUDO?= # empty
MAKE_ENV+= SUDO="${SUDO}"
OPTIONS= PAM "Enable pam(3) support" on \
TCP_WRAPPERS "Enable tcp_wrappers support" on \
LIBEDIT "Enable readline support to sftp(1)" on \
KERBEROS "Enable kerberos (autodetection)" on \
SUID_SSH "Enable suid SSH (Recommended off)" off \
GSSAPI "Enable GSSAPI support (req: KERBEROS)" off \
KERB_GSSAPI "Enable Kerberos/GSSAPI patch (req: GSSAPI)" off \
OPENSSH_CHROOT "Enable CHROOT support" off \
OPENSC "Enable OpenSC smartcard support" off \
OPENSCPINPATCH "Enable OpenSC PIN patch" off \
HPN "Enable HPN-SSH patch" off \
LPK "Enable LDAP Public Key (LPK) patch" off \
X509 "Enable x509 certificate patch" off \
OVERWRITE_BASE "OpenSSH overwrite base" off
.include <bsd.port.pre.mk>
.if ${OSVERSION} >= 800037
BROKEN= does not compile
.endif
.if defined(WITH_X509) && ( defined(WITH_HPN) || defined(WITH_LPK))
BROKEN= X509 patch incompatible with HPN and LPK patches
.endif
.if defined(OPENSSH_OVERWRITE_BASE)
WITH_OVERWRITE_BASE= yes
.endif
.if !defined(WITHOUT_PAM) && exists(/usr/include/security/pam_modules.h)
CONFIGURE_ARGS+= --with-pam
.endif
.if !defined(WITHOUT_TCP_WRAPPERS) && exists(/usr/include/tcpd.h)
CONFIGURE_ARGS+= --with-tcp-wrappers
.endif
.if !defined(WITHOUT_LIBEDIT)
CONFIGURE_ARGS+= --with-libedit
.endif
.if !defined(WITH_SUID_SSH)
CONFIGURE_ARGS+= --disable-suid-ssh
.endif
.if !defined(WITHOUT_KERBEROS)
.if defined(KRB5_HOME) && exists(${KRB5_HOME}) || defined(WITH_GSSAPI)
.if defined(WITH_KERB_GSSAPI)
BROKEN= KERB_GSSAPI patch incompatible with ${PORTNAME}-5.2p1
PATCH_DIST_STRIP= -p0
PATCH_SITES+= http://www.sxw.org.uk/computing/patches/
PATCHFILES+= openssh-5.0p1-gsskex-20080404.patch
.endif
PORTABLE_SUFFIX= # empty
GSSAPI_SUFFIX= -gssapi
CONFLICTS+= openssh-portable-*-[0-9]*
CONFIGURE_ARGS+= --with-kerberos5=${KRB5_HOME}
.if ${OPENSSLBASE} == "/usr"
CONFIGURE_ARGS+= --without-rpath
LDFLAGS= # empty
.endif
.else
CONFLICTS+= openssh-gssapi-*-[0-9]*
CONFIGURE_ARGS+= --with-rpath=${OPENSSLRPATH}
.if exists(/usr/include/krb5.h)
CONFIGURE_ARGS+= --with-kerberos5
EXTRA_PATCHES+= ${FILESDIR}/gss-serv.c.patch
.endif
.endif
.endif
.if ${OPENSSLBASE} != "/usr"
CONFIGURE_ARGS+= --with-ssl-dir=${OPENSSLBASE}
.endif
.if defined(WITH_OPENSSH_CHROOT)
CFLAGS+= -DCHROOT
.endif
.if defined(WITH_OPENSC)
LIB_DEPENDS+= opensc.2:${PORTSDIR}/security/opensc
CONFIGURE_ARGS+= --with-opensc=${LOCALBASE}
.endif
# See http://bugzilla.mindrot.org/show_bug.cgi?id=608
.if defined(WITH_OPENSCPINPATCH)
EXTRA_PATCHES+= ${FILESDIR}/scardpin.patch
.endif
.if defined(WITH_HPN)
EXTRA_PATCHES+= ${FILESDIR}/openssh-5.2p1-hpn.patch
.endif
# See http://dev.inversepath.com/trac/openssh-lpk
.if defined(WITH_LPK)
EXTRA_PATCHES+= ${FILESDIR}/openssh-lpk-5.0p1-0.3.9.patch
USE_OPENLDAP= yes
CPPFLAGS+= "-I${LOCALBASE}/include -DWITH_LDAP_PUBKEY"
CONFIGURE_ARGS+= --with-libs='-lldap' --with-ldflags='-L${LOCALBASE}/lib' \
--with-cppflags='-I${LOCALBASE}/include -DWITH_LDAP_PUBKEY'
.endif
# resolve some patches incompatibility between LPK and HPN patches
.if defined(WITH_HPN) && defined(WITH_LPK)
EXTRA_PATCHES+= ${FILESDIR}/openssh-lpk+hpn-servconf.patch
.elif defined(WITH_HPN) && !defined(WITH_LPK)
EXTRA_PATCHES+= ${FILESDIR}/openssh-5.2p1-hpn-servconf.patch
.elif defined(WITH_LPK) && !defined(WITH_HPN)
EXTRA_PATCHES+= ${FILESDIR}/openssh-lpk-5.0p1-0.3.9-servconv.patch
.endif
.if defined(WITH_LPK) && ${ARCH} == "amd64"
EXTRA_PATCHES+= ${FILESDIR}/openssh-lpk-5.0p1-64bit.patch
.endif
# See http://www.roumenpetrov.info/openssh/
.if defined(WITH_X509)
PATCH_DIST_STRIP= -p1
PATCH_SITES+= http://www.roumenpetrov.info/openssh/x509-6.2/
PATCHFILES+= openssh-5.2p1+x509-6.2.diff.gz
.endif
.if defined(WITH_OVERWRITE_BASE)
WITH_OPENSSL_BASE= yes
BASE_SUFFIX= -overwrite-base
CONFIGURE_ARGS+= --localstatedir=/var
EMPTYDIR= /var/empty
PREFIX= /usr
ETCSSH= /etc/ssh
USE_RC_SUBR= yes
SUB_FILES+= openssh
PLIST_SUB+= NOTBASE="@comment "
PLIST_SUB+= BASE=""
PLIST_SUB+= BASEPREFIX="${PREFIX}"
PLIST_SUB+= ERASEEMPTY="@comment "
.else
.if exists(/var/empty)
EMPTYDIR= /var/empty
PLIST_SUB+= ERASEEMPTY="@comment "
.else
EMPTYDIR= ${PREFIX}/empty
PLIST_SUB+= ERASEEMPTY=""
.endif
ETCSSH= ${PREFIX}/etc/ssh
USE_RC_SUBR= openssh
PLIST_SUB+= NOTBASE=""
PLIST_SUB+= BASE="@comment "
.endif
# After all
SUB_LIST+= ETCSSH="${ETCSSH}"
PLIST_SUB+= EMPTYDIR="${EMPTYDIR}"
CONFIGURE_ARGS+= --sysconfdir=${ETCSSH} --with-privsep-path=${EMPTYDIR}
RC_SCRIPT_NAME= openssh${RC_SUBR_SUFFIX}
post-extract:
.if defined(OPENSSH_SNAPSHOT)
@# rc.d script have same name of openssh snapshot dir
@${MV} ${WRKDIR}/${PORTNAME} ${WRKDIR}/${PORTNAME}-${DISTVERSION}
.endif
post-patch:
@${REINPLACE_CMD} -e 's|-ldes|-lcrypto|g' ${WRKSRC}/configure
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${LOCALBASE}|' \
-e 's|%%RC_SCRIPT_NAME%%|${RC_SCRIPT_NAME}|' ${WRKSRC}/sshd.8
@${REINPLACE_CMD} -E -e 's|SSH_VERSION|TMP_SSH_VERSION|' \
-e 's|.*SSH_RELEASE.*||' ${WRKSRC}/version.h
@${ECHO_CMD} '#define FREEBSD_PORT_VERSION " FreeBSD-${PKGNAME}"' >> \
${WRKSRC}/version.h
@${ECHO_CMD} '#define SSH_VERSION TMP_SSH_VERSION SSH_PORTABLE FREEBSD_PORT_VERSION' >> \
${WRKSRC}/version.h
@${ECHO_CMD} '#define SSH_RELEASE TMP_SSH_VERSION SSH_PORTABLE FREEBSD_PORT_VERSION' >> \
${WRKSRC}/version.h
.if defined(WITH_HPN)
@${REINPLACE_CMD} -e 's|TMP_SSH_VERSION SSH_PORTABLE|TMP_SSH_VERSION SSH_PORTABLE SSH_HPN|' \
${WRKSRC}/version.h
.endif
pre-su-install:
@${MKDIR} ${EMPTYDIR}
if ! pw groupshow sshd; then pw groupadd sshd -g 22; fi
if ! pw usershow sshd; then pw useradd sshd -g sshd -u 22 \
-h - -d ${EMPTYDIR} -s /nonexistent -c "sshd privilege separation"; fi
.if !exists(${ETCSSH})
@${MKDIR} ${ETCSSH}
.endif
.for i in ${PRECIOUS}
.if exists(${ETCOLD}/${i}) && !exists(${ETCSSH}/${i})
@${ECHO_MSG} "==> Linking ${ETCSSH}/${i} from old layout."
${LN} ${ETCOLD}/${i} ${ETCSSH}/${i}
.endif
.endfor
post-install:
${INSTALL_DATA} -c ${WRKSRC}/ssh_config.out ${ETCSSH}/ssh_config-dist
${INSTALL_DATA} -c ${WRKSRC}/sshd_config.out ${ETCSSH}/sshd_config-dist
.if defined(WITH_OVERWRITE_BASE)
@${ECHO_CMD} "===> Installing rc.d startup script(s)"
@${ECHO_CMD} "@cwd ${LOCALBASE}" >> ${TMPPLIST}
@${MKDIR} ${LOCALBASE}/etc/rc.d
@${INSTALL_SCRIPT} ${WRKDIR}/openssh ${LOCALBASE}/etc/rc.d/${RC_SCRIPT_NAME}
@${ECHO_CMD} "etc/rc.d/${RC_SCRIPT_NAME}" >> ${TMPPLIST}
@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
.endif
@${CAT} ${PKGMESSAGE}
test: build
(cd ${WRKSRC}/regress && ${SETENV} ${MAKE_ENV} TEST_SHELL=/bin/sh \
PATH=${WRKSRC}:${PREFIX}/bin:${PREFIX}/sbin:${PATH} \
${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS})
.include <bsd.port.post.mk>