1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-23 04:23:08 +00:00
freebsd-ports/Mk/Uses/perl5.mk
Mathieu Arnold 91f50b4829 Pod::Parser was removed from perl5 in 5.31.0.
Add a P5_POD_PARSER variable to use in dependencies for ports that need
it.

PR:		247826
2020-07-20 14:56:23 +00:00

343 lines
12 KiB
Makefile

# $FreeBSD$
#
# Provide support to use perl5
#
# PERL5 - Set to full path of perl5, either in the system or
# installed from a port.
# PERL - Set to full path of perl5, either in the system or
# installed from a port, but without the version number.
# Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION - Full version of perl5 (see below for current value).
#
# PERL_VER - Short version of perl5 (major.minor without patchlevel)
#
# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
# M is major version, N is minor version, and P is
# the patch level. E.g., PERL_VERSION=5.14.4 would give
# a PERL_LEVEL of 501404. This can be used in comparisons
# to determine if the version of perl is high enough,
# whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
# (value: mach).
# PERL_PORT - Name of the perl port that is installed
# (for example: perl5.24)
# SITE_PERL - Directory name where site specific perl packages go.
# This value is added to PLIST_SUB.
# SITE_ARCH - Directory name where arch site specific perl packages go.
# This value is added to PLIST_SUB.
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
# patch, build, run or test phases.
# It can also have configure, modbuild and modbuildtiny when
# the port needs to run Makefile.PL, Build.PL and a
# Module::Build::Tiny flavor of Build.PL.
#
# MAINTAINER: perl@FreeBSD.org
.if !defined(_INCLUDE_USES_PERL5_MK)
_INCLUDE_USES_PERL5_MK= yes
. if !empty(perl5_ARGS)
IGNORE= Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
. endif
USE_PERL5?= run build
# When adding a version, please keep the comment in
# Mk/bsd.default-versions.mk in sync.
. if ${PERL5_DEFAULT} == 5.28
.include "${PORTSDIR}/lang/perl5.28/version.mk"
. elif ${PERL5_DEFAULT} == 5.30
.include "${PORTSDIR}/lang/perl5.30/version.mk"
. elif ${PERL5_DEFAULT} == 5.32
.include "${PORTSDIR}/lang/perl5.32/version.mk"
. elif ${PERL5_DEFAULT} == devel
.include "${PORTSDIR}/lang/perl5-devel/version.mk"
# Force PERL_PORT here in case two identical PERL_VERSION.
PERL_PORT?= perl5-devel
. else
IGNORE= Invalid perl5 version ${PERL5_DEFAULT}
. endif
PERL_VER?= ${PERL_VERSION:C/\.[0-9]+$//}
. if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
perl_minor= ${_perl_minor:C|^.*(...)|\1|}
. if ${perl_minor} >= 100
perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
. else # ${perl_minor} < 100
_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
perl_patch= ${_perl_patch:C|^.*(..)|\1|}
. endif # ${perl_minor} < 100
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
. else
PERL_LEVEL=0
. endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
PERL_ARCH?= mach
# there must always be a default to prevent dependency failures such
# as "ports/lang: not found". Also, perl5-devel is taken care in the
# perl5_default file, or up there in the default versions selection.
# When adding a version, please keep the comment in
# Mk/bsd.default-versions.mk in sync.
. if ${PERL_LEVEL} >= 503200
PERL_PORT?= perl5.32
. elif ${PERL_LEVEL} >= 503000
PERL_PORT?= perl5.30
. else # ${PERL_LEVEL} < 503000
PERL_PORT?= perl5.28
. endif
SITE_PERL_REL?= lib/perl5/site_perl
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
SITE_ARCH_REL?= ${SITE_PERL_REL}/${PERL_ARCH}/${PERL_VER}
SITE_ARCH?= ${LOCALBASE}/${SITE_ARCH_REL}
SITE_MAN3_REL?= ${SITE_PERL_REL}/man/man3
SITE_MAN3?= ${PREFIX}/${SITE_MAN3_REL}
SITE_MAN1_REL?= ${SITE_PERL_REL}/man/man1
SITE_MAN1?= ${PREFIX}/${SITE_MAN1_REL}
PERL5?= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL?= ${LOCALBASE}/bin/perl
CONFIGURE_ENV+= ac_cv_path_PERL=${PERL} ac_cv_path_PERL_PATH=${PERL} \
PERL_USE_UNSAFE_INC=1
MAKE_ENV+= PERL_USE_UNSAFE_INC=1
QA_ENV+= SITE_ARCH_REL=${SITE_ARCH_REL} LIBPERL=libperl.so.${PERL_VER}
# Define the want perl first if defined
. if ${USE_PERL5:M5*}
want_perl_sign= ${USE_PERL5:M5*:C|^[0-9.]+||}
want_perl_ver= ${USE_PERL5:M5*:S|${want_perl_sign}$||}
want_perl_major= ${want_perl_ver:C|\..*||}
_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch}
. endif
# All but version
_USE_PERL5= ${USE_PERL5:N5*}
# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
. if empty(_want_perl_minor)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|}
. elif empty(_want_perl_patch)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|}
. else
masked_PERL_LEVEL= ${PERL_LEVEL}
. endif
. if defined(want_perl_sign)
. if ${want_perl_sign} == "+"
. if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
IGNORE= ${USE_PERL5_REASON}
. endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
. elif ${want_perl_sign} == ""
. if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly
IGNORE= ${USE_PERL5_REASON}
. endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
. elif ${want_perl_sign} == "-"
. if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver}
IGNORE= ${USE_PERL5_REASON}
. endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
. else # wrong suffix
IGNORE= improper use of USE_PERL5
. endif
. endif
_USE_PERL5_VALID= build configure extract modbuild modbuildtiny patch run \
test
_USE_PERL5_UNKNOWN=
. for component in ${_USE_PERL5}
. if empty(_USE_PERL5_VALID:M${component})
_USE_PERL5_UNKNOWN+= ${component}
. endif
. endfor
. if !empty(_USE_PERL5_UNKNOWN)
IGNORE= has unknown USE_PERL5 components: ${_USE_PERL5_UNKNOWN}
. endif
_USES_POST+= perl5
. if ${PERL_LEVEL} >= 503100
P5_POD_PARSER= p5-Pod-Parser>=0:textproc/p5-Pod-Parser
. else
P5_POD_PARSER=
. endif
.endif
.if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
_INCLUDE_USES_PERL5_POST_MK= yes
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
PERL_VER=${PERL_VER} \
PERL5_MAN1=${SITE_MAN1_REL} \
PERL5_MAN3=${SITE_MAN3_REL} \
SITE_PERL=${SITE_PERL_REL} \
SITE_ARCH=${SITE_ARCH_REL}
# handle perl5 specific manpages
. for sect in 3
. if defined(P5MAN${sect})
_MANPAGES+= ${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
. endif
. endfor
MANDIRS+= ${PREFIX}/${SITE_PERL_REL}/man
. if ${_USE_PERL5:Mmodbuild} || ${_USE_PERL5:Mmodbuildtiny}
_USE_PERL5+= configure
ALL_TARGET?= # empty
CONFIGURE_ARGS+=--install_path lib="${PREFIX}/${SITE_PERL_REL}" \
--install_path arch="${PREFIX}/${SITE_ARCH_REL}" \
--install_path script="${PREFIX}/bin" \
--install_path bin="${PREFIX}/bin" \
--install_path libdoc="${MAN3PREFIX}/man/man3" \
--install_path bindoc="${MAN1PREFIX}/man/man1"
CONFIGURE_SCRIPT?= Build.PL
PL_BUILD?= Build
CONFIGURE_ARGS+=--destdir ${STAGEDIR}
DESTDIRNAME= --destdir
. if ${_USE_PERL5:Mmodbuild}
CONFIGURE_ARGS+=--perl="${PERL}"
. if ${PORTNAME} != Module-Build
BUILD_DEPENDS+= p5-Module-Build>=0.4206:devel/p5-Module-Build
. endif
CONFIGURE_ARGS+=--create_packlist 1
. endif
. if ${_USE_PERL5:Mmodbuildtiny}
. if ${PORTNAME} != Module-Build-Tiny
BUILD_DEPENDS+= p5-Module-Build-Tiny>=0.039:devel/p5-Module-Build-Tiny
. endif
CONFIGURE_ARGS+=--create_packlist 1
. endif
. elif ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+=INSTALLDIRS="site"
. endif # modbuild
. if ${_USE_PERL5:Mconfigure}
_USE_PERL5+= build run
# Disable AutoInstall from attempting to install from CPAN directly in
# the case of missing dependencies. This causes the build to loop on
# the build cluster asking for interactive input.
CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
. if defined(BATCH) && !defined(IS_INTERACTIVE)
CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES"
. endif # defined(BATCH) && !defined(IS_INTERACTIVE)
. endif # configure
. if ${_USE_PERL5:Mextract}
EXTRACT_DEPENDS+= ${PERL5_DEPEND}:lang/${PERL_PORT}
. endif
. if ${_USE_PERL5:Mpatch}
PATCH_DEPENDS+= ${PERL5_DEPEND}:lang/${PERL_PORT}
. endif
. if ${_USE_PERL5:Mbuild}
BUILD_DEPENDS+= ${PERL5_DEPEND}:lang/${PERL_PORT}
. endif
. if ${_USE_PERL5:Mrun}
RUN_DEPENDS+= ${PERL5_DEPEND}:lang/${PERL_PORT}
. endif
. if ${_USE_PERL5:Mtest}
TEST_DEPENDS+= ${PERL5_DEPEND}:lang/${PERL_PORT}
. endif
. if ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" LD="${CC}" PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?= Makefile.PL
MAN3PREFIX?= ${PREFIX}/${SITE_PERL_REL}
MAN1PREFIX?= ${PREFIX}/${SITE_PERL_REL}
.undef HAS_CONFIGURE
. if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
@cd ${CONFIGURE_WRKSRC} && \
${SETENV} ${CONFIGURE_ENV} \
${PERL5} ${CONFIGURE_CMD} ${CONFIGURE_ARGS}
. if !${_USE_PERL5:Mmodbuild*}
@cd ${CONFIGURE_WRKSRC} && \
${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
. endif # ! modbuild
. endif # !target(do-configure)
. endif # configure
. if ${_USE_PERL5:Mmodbuild*}
. if !target(do-build)
do-build:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${ALL_TARGET} ${MAKE_ARGS})
. endif # !target(do-build)
. if !${USES:Mgmake}
. if !target(do-install)
do-install:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${INSTALL_TARGET} ${MAKE_ARGS})
. endif # !target(do-install)
. endif # ! USES=gmake
. endif # modbuild
PACKLIST_DIR?= ${PREFIX}/${SITE_ARCH_REL}/auto
# In all those, don't use - before the command so that the user does
# not wonder what has been ignored by this message "*** Error code 1 (ignored)"
_USES_install+= 560:fix-perl-things
fix-perl-things:
# Remove STAGEDIR from .packlist and add the file to the plist.
@(if [ -d ${STAGEDIR}${PACKLIST_DIR} ] ; then \
${FIND} ${STAGEDIR}${PACKLIST_DIR} -name .packlist | while read f ; do \
${SED} -i '' 's|^${STAGEDIR}||' "$$f"; \
${ECHO} $$f | ${SED} -e 's|^${STAGEDIR}||' >> ${TMPPLIST}; \
done \
fi) || :
# Starting with perl 5.20, the empty bootstrap files are not installed any more
# by ExtUtils::MakeMaker. As we don't need them anyway, remove them.
# Module::Build continues to install them, so remove the files unconditionally.
@${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete || :
# Some ports use their own way of building perl modules and generate
# perllocal.pod, remove it here so that those ports don't include it
# by mistake in their plists. It is sometime compressed, so use a
# shell glob for the removal. Also, remove the directories that
# contain it to not leave orphans directories around.
@${RM} ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH}/perllocal.pod* || :
@${RMDIR} -p ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} 2>/dev/null || :
# Starting at ExtUtils::MakeMaker 7.06 and Perl 5.25.1, the base README.pod is
# no longer manified into a README.3, as the README.pod is installed and can be
# read with perldoc, remove the README.3 files that may be generated.
@[ -d "${STAGEDIR}${SITE_MAN3}" ] && \
${FIND} ${STAGEDIR}${SITE_MAN3} -name '*::README.3' -delete || :
# Starting at ExtUtils::MakeMaker 7.31_06 and Perl 5.27.1, the base README.pod is
# no longer installed. So remove any that can be there.
@[ -d "${STAGEDIR}${PREFIX}/${SITE_PERL_REL}" ] && \
${FIND} ${STAGEDIR}${PREFIX}/${SITE_PERL_REL} -name README.pod -delete || :
. if !target(do-test) && (!empty(USE_PERL5:Mmodbuild*) || !empty(USE_PERL5:Mconfigure))
TEST_TARGET?= test
TEST_WRKSRC?= ${BUILD_WRKSRC}
do-test:
. if ${USE_PERL5:Mmodbuild*}
@cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
. elif ${USE_PERL5:Mconfigure}
@cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
. endif # USE_PERL5:Mmodbuild*
. endif # do-test
.endif # defined(_POSTMKINCLUDED)