mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-25 04:43:33 +00:00
Code Issues Releases Activity
b2f122946b
freebsd-ports/Mk/bsd.ruby.mk
Mark Linimon e2d64eefa6 * Change all bogus uses of BROKEN to IGNORE. Note: the BROKEN_WITH_* 
forms are retained for compatibility but deprecated [1]

* Add sha256 to CHECKSUM_ALGORITHMS [2]

* Remove some whitespace [2]

* Add USE_SCONS and bsd.scons.mk for the Python-based SCons build system [3]

* Fix USE_LDCONFIG with non-default PREFIX [4]

* Add USE_WX and friends, and bsd.wx.mk, for common code for WxWidgets
  support [5]

* Add 'make missing' to show missing dependencies [6]

* Fix DESKTOP_ENTRIES processing on 4.x [7]

PR:	92445 [1], 98206 [2], 98731 [3], 99370 [4], 89398 [5],
	93601 [6], 98891 [7]

Submitted by:	linimon [1], edwin [2], alex at foxybanana dot com [3],
		gerald [4], flz [4], alepulver [5], alex at fafula dot com [6],
		shaun [7]
2006-07-05 02:18:09 +00:00

480 lines
16 KiB
Makefile
Raw Blame History

#
# bsd.ruby.mk - Utility definitions for Ruby related ports.
#
# Created by: Akinori MUSHA <knu@FreeBSD.org>
#
# $FreeBSD$
#
.if !defined(Ruby_Include)
Ruby_Include= bsd.ruby.mk
Ruby_Include_MAINTAINER= knu@FreeBSD.org
#
# [variables that a user may define]
#
# RUBY_VER - (See below)
# RUBY_DEFAULT_VER - Set to (e.g.) "1.8" if you want to refer to "ruby18" just as "ruby".
# RUBY_ARCH - (See below)
# RUBY_RD_HTML - Define if you want HTML files generated from RD files.
#
# [variables that each port can define]
#
# RUBY - Set to full path of ruby. If you set this, the values of the following variables are automatically obtained from the ruby executable: RUBY_VER, RUBY_VERSION, RUBY_NAME, RUBY_ARCH, RUBY_LIBDIR, RUBY_ARCHLIBDIR, RUBY_SITELIBDIR, and RUBY_SITEARCHLIBDIR.
# RUBY_VER - Set to the alternative short version of ruby in the form of `x.y' (see below for current value).
# USE_RUBY - Says that the port uses ruby for building and running.
# RUBY_NO_BUILD_DEPENDS - Says that the port should not build-depend on ruby.
# RUBY_NO_RUN_DEPENDS - Says that the port should not run-depend on ruby.
# USE_LIBRUBY - Says that the port uses libruby.
# USE_RUBY_EXTCONF - Says that the port uses extconf.rb to configure. Implies USE_RUBY.
# RUBY_EXTCONF - Set to the alternative name of extconf.rb (default: extconf.rb).
# RUBY_EXTCONF_SUBDIRS - Set to list of subdirectories, if multiple modules are included.
# USE_RUBY_SETUP - Says that the port uses setup.rb to configure and build.
# RUBY_SETUP - Set to the alternative name of setup.rb (default: setup.rb).
# USE_RUBY_AMSTD - Says that the port uses amstd for building and running.
# USE_RUBY_RDTOOL - Says that the port uses rdtool to generate documents.
# USE_RUBY_RDOC - Says that the port uses rdoc to generate documents.
# USE_RUBY_FEATURES - Says that the port requires some of the following features
# for building and/or running (default: none):
# benchmark bigdecimal devel-logger
# dl drb erb
# fileutils gserver iconv
# ipaddr open-uri openssl
# optparse pp racc-runtime
# rdoc rexml ruby18
# runit set soap
# stringio strscan testunit
# tsort webrick xmlrpc
# yaml zlib
# benchmark dl fileutil optparse pp racc-runtime
# rexml ruby18 set stringio strscan tsort yaml
# RUBY_REQUIRE - Set to a Ruby expression to evaluate before building the port. The constant "Ruby" is set to the integer version number of ruby, and the result of the expression will be set to RUBY_PROVIDED, which is left undefined if the result is nil, false or a zero-length string. Implies USE_RUBY.
# RUBY_SHEBANG_FILES - Specify the files which shebang lines you want to fix.
# RUBY_RD_FILES - Specify the RD files which you want to generate HTML documents from.
# If this is defined and not empty, USE_RUBY_RDTOOL is implied and
# RUBY_RD_HTML_FILES is defined.
#
# [variables that each port should not (re)define]
#
# RUBY_PKGNAMEPREFIX - Common PKGNAMEPREFIX for ruby ports (default: ruby${RUBY_SUFFIX}-)
# RUBY_VERSION - Full version of ruby without preview/beta suffix in the form of `x.y.z' (see below for current value).
# RUBY_VERSION_CODE - Full integer version of ruby without preview/beta suffix in the form of `xyz'.
# RUBY_PORTVERSION - PORTVERSION for the standard ruby ports (ruby, ruby-gdbm, etc.).
# RUBY_DISTNAME - DISTNAME for the standard ruby ports, i.e. the basename of the ruby distribution tarball.
# RUBY_DISTVERSION - The version number part of RUBY_DISTNAME.
# RUBY_PATCHFILES - PATCHFILES for the standard ruby ports, i.e. the basename of the ruby distribution tarball.
# RUBY_WRKSRC - WRKSRC for the ruby port.
# MASTER_SITE_SUBDIR_RUBY - MASTER_SITE_SUBDIR for the ruby distfiles.
#
# RUBY_SHLIBVER - Major version of libruby (see below for current value).
# RUBY_ARCH - Set to target architecture name. (e.g. i386-freebsdelf4.3)
# RUBY_SUFFIX - Suffix for ruby binaries and directories (${RUBY_VER:S/.//}).
# RUBY_WITHOUT_SUFFIX - Always ${LOCALBASE}/bin/ruby.
# RUBY_WITH_SUFFIX - Always ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}.
# RUBY_NAME - Ruby's name with trailing suffix.
#
# RUBY_MODNAME - Set to the module name (default: ${PORTNAME}).
#
# RUBY_RD2 - Full path of rd2 executable.
# RUBY_RDOC - Full path of rdoc executable.
#
# RUBY_BASE_PORT - Port path of base ruby without PORTSDIR, without suffix except version.
# RUBY_PORT - Port path of ruby without PORTSDIR.
# RUBY_SHIM18_PORT - Port path of ruby16-shim-ruby18 without PORTSDIR.
# RUBY_AMSTD_PORT - Port path of ruby-amstd without PORTSDIR.
# RUBY_RDTOOL_PORT - Port path of rdtool without PORTSDIR.
# RUBY_RDOC_PORT - Port path of rdoc without PORTSDIR.
# RUBY_ICONV_PORT - Port path of ruby-iconv without PORTSDIR.
#
# DEPEND_LIBRUBY - LIB_DEPENDS entry for libruby.
# DEPEND_RUBY - BUILD_DEPENDS/RUN_DEPENDS entry for ruby.
# DEPEND_RUBY_SHIM18 - BUILD_DEPENDS/RUN_DEPENDS entry for ruby16-shim-ruby18.
# DEPEND_RUBY_AMSTD - BUILD_DEPENDS/RUN_DEPENDS entry for ruby-amstd.
# DEPEND_RUBY_RDTOOL - BUILD_DEPENDS entry for rdtool.
# DEPEND_RUBY_RDOC - BUILD_DEPENDS entry for rdoc.
# DEPEND_RUBY_ICONV - BUILD_DEPENDS/RUN_DEPENDS entry for ruby-iconv.
#
# RUBY_LIBDIR - Installation path for architecture independent libraries.
# RUBY_ARCHLIBDIR - Installation path for architecture dependent libraries.
# RUBY_SITELIBDIR - Installation path for site architecture independent libraries.
# RUBY_SITEARCHLIBDIR - Installation path for site architecture dependent libraries.
# RUBY_DOCDIR - Installation path for documents.
# RUBY_EXAMPLESDIR - Installation path for examples.
# RUBY_RIDIR - Installation path for site architecture independentri documents.
# RUBY_SITERIDIR - Installation path for site architecture dependent ri documents.
# RUBY_MODDOCDIR - Installation path for the module's documents.
# RUBY_MODEXAMPLESDIR - Installation path for the module's examples.
# RUBY_ELISPDIR - Installation path for emacs lisp files.
#
RUBY_DEFAULT_VER?= 1.8
RUBY_VER?= ${RUBY_DEFAULT_VER}
.if defined(RUBY)
.if !exists(${RUBY})
IGNORE= cannot install: you set the variable RUBY to "${RUBY}", but it does not seem to exist. Please specify an already installed ruby executable.
.endif
_RUBY_TEST!= ${RUBY} -e 'begin; require "rbconfig"; rescue LoadError; puts "error"; end'
.if !empty(_RUBY_TEST)
IGNORE= cannot install: you set the variable RUBY to "${RUBY}", but it failed to include rbconfig. Please specify a properly installed ruby executable.
.endif
_RUBY_CONFIG= ${RUBY} -r rbconfig -e 'C = Config::CONFIG' -e
RUBY_VERSION!= ${_RUBY_CONFIG} 'puts VERSION'
RUBY_SUFFIX?= # empty
RUBY_ARCH!= ${_RUBY_CONFIG} 'puts C["target"]'
RUBY_NAME!= ${_RUBY_CONFIG} 'puts C["ruby_install_name"]'
_RUBY_SYSLIBDIR!= ${_RUBY_CONFIG} 'puts C["libdir"]'
_RUBY_SITEDIR!= ${_RUBY_CONFIG} 'puts C["sitedir"]'
.else
RUBY?= ${LOCALBASE}/bin/${RUBY_NAME}
.if defined(RUBY_VER) && ${RUBY_VER} == 1.8
RUBY_VERSION?= 1.8.4
#RUBY_DISTVERSION?= ${RUBY_VERSION}
#RUBY_PATCHFILES?= ruby-${RUBY_DISTVERSION}-yyyy.mm.dd.diff.bz2
# Security patch
RUBY_PATCHFILES?= ${RUBY_VERSION}-patch1.gz
#RUBY_PORTVERSION?= ${RUBY_VERSION}
RUBY_WRKSRC= ${WRKDIR}/ruby-${RUBY_VERSION}
#MASTER_SITE_SUBDIR_RUBY= snapshots
.elif defined(RUBY_VER) && ${RUBY_VER} == 1.7
IGNORE= Ruby 1.7 is obsolete; set RUBY_VER to 1.8 instead.
.else
RUBY_VERSION?= 1.6.8
RUBY_DISTVERSION?= ${RUBY_VERSION}-2004.07.28
#RUBY_PATCHFILES?= ruby-${RUBY_DISTVERSION}-${RUBY_PORTVERSION}.diff.bz2
# Security patch
RUBY_PATCHFILES?= ${RUBY_VERSION}-patch1.gz
RUBY_PORTVERSION?= ${RUBY_VERSION}.2004.07.28
#RUBY_WRKSRC= ${WRKDIR}/ruby-${RUBY_VERSION}
MASTER_SITE_SUBDIR_RUBY= snapshots
.endif
# defined(RUBY_VER) && ${RUBY_VER} == 1.8
CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL:C/\..*//}
RUBY_ARCH?= ${ARCH}-freebsd${OSREL:C/\..*//}
RUBY_NAME?= ruby${RUBY_SUFFIX}
_RUBY_SYSLIBDIR?= ${LOCALBASE}/lib
_RUBY_SITEDIR?= ${_RUBY_SYSLIBDIR}/ruby/site_ruby
.endif
# defined(RUBY)
RUBY_DEFAULT_SUFFIX?= ${RUBY_DEFAULT_VER:S/.//}
RUBY_DISTVERSION?= ${RUBY_VERSION}
RUBY_PORTVERSION?= ${RUBY_VERSION}
MASTER_SITE_SUBDIR_RUBY?= ${RUBY_VER}
RUBY_DISTNAME?= ruby-${RUBY_DISTVERSION}
RUBY_WRKSRC?= ${WRKDIR}/${RUBY_DISTNAME}
RUBY_VERSION_CODE?= ${RUBY_VERSION:S/.//g}
RUBY_VER= ${RUBY_VERSION:R}
RUBY_SUFFIX= ${RUBY_VER:S/.//}
RUBY_WITHOUT_SUFFIX?= ${LOCALBASE}/bin/ruby
RUBY_WITH_SUFFIX?= ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}
RUBY_PKGNAMEPREFIX?= ruby${RUBY_SUFFIX}-
RUBY_SHLIBVER?= ${RUBY_VER:S/.//}
RUBY_CONFIGURE_ARGS+= --program-prefix=""
DEPENDS_ARGS+= RUBY_VER="${RUBY_VER}"
RUBY_CONFIGURE_ARGS+= --program-suffix="${RUBY_SUFFIX}"
RUBY_MODNAME?= ${PORTNAME}
# Commands
RUBY_RD2?= ${LOCALBASE}/bin/rd2
RUBY_RDOC?= ${LOCALBASE}/bin/rdoc
# Ports
RUBY_BASE_PORT?= lang/ruby${RUBY_VER:S/.//}
RUBY_PORT?= ${RUBY_BASE_PORT}
RUBY_SHIM18_PORT?= lang/ruby16-shim-ruby18
RUBY_AMSTD_PORT?= devel/ruby-amstd
RUBY_RDTOOL_PORT?= textproc/ruby-rdtool
RUBY_RDOC_PORT?= textproc/ruby-rdoc
RUBY_ICONV_PORT?= converters/ruby-iconv
# Depends
DEPEND_LIBRUBY?= ${RUBY_NAME}.${RUBY_SHLIBVER}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY?= ${RUBY}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY_SHIM18?= ${RUBY_SITEARCHLIBDIR}/features/ruby18/file_ruby18.so:${PORTSDIR}/${RUBY_SHIM18_PORT}
DEPEND_RUBY_AMSTD?= ${RUBY_SITELIBDIR}/amstd/version.rb:${PORTSDIR}/${RUBY_AMSTD_PORT}
DEPEND_RUBY_RDTOOL?= ${RUBY_RD2}:${PORTSDIR}/${RUBY_RDTOOL_PORT}
.if ${RUBY_VER} <= 1.6
DEPEND_RUBY_ICONV= ${RUBY_SITEARCHLIBDIR}/iconv.so:${PORTSDIR}/${RUBY_ICONV_PORT}
.else
DEPEND_RUBY_ICONV= ${RUBY_ARCHLIBDIR}/iconv.so:${PORTSDIR}/${RUBY_ICONV_PORT}
.endif
# Directories
RUBY_LIBDIR?= ${_RUBY_SYSLIBDIR}/ruby/${RUBY_VER}
RUBY_ARCHLIBDIR?= ${RUBY_LIBDIR}/${RUBY_ARCH}
RUBY_SITELIBDIR?= ${_RUBY_SITEDIR}/${RUBY_VER}
RUBY_SITEARCHLIBDIR?= ${RUBY_SITELIBDIR}/${RUBY_ARCH}
RUBY_DOCDIR?= ${LOCALBASE}/share/doc/${RUBY_NAME}
RUBY_EXAMPLESDIR?= ${LOCALBASE}/share/examples/${RUBY_NAME}
RUBY_RIDIR?= ${LOCALBASE}/share/ri/${RUBY_VER}/system
RUBY_SITERIDIR?= ${LOCALBASE}/share/ri/${RUBY_VER}/site
RUBY_MODDOCDIR?= ${RUBY_DOCDIR}/${RUBY_MODNAME}
RUBY_MODEXAMPLESDIR?= ${RUBY_EXAMPLESDIR}/${RUBY_MODNAME}
RUBY_ELISPDIR?= ${_RUBY_SYSLIBDIR}/ruby/elisp
# PLIST
PLIST_RUBY_DIRS= RUBY_LIBDIR="${RUBY_LIBDIR}" \
RUBY_ARCHLIBDIR="${RUBY_ARCHLIBDIR}" \
RUBY_SITELIBDIR="${RUBY_SITELIBDIR}" \
RUBY_SITEARCHLIBDIR="${RUBY_SITEARCHLIBDIR}" \
RUBY_DOCDIR="${RUBY_DOCDIR}" \
RUBY_EXAMPLESDIR="${RUBY_EXAMPLESDIR}" \
RUBY_RIDIR="${RUBY_RIDIR}" \
RUBY_SITERIDIR="${RUBY_SITERIDIR}" \
RUBY_MODDOCDIR="${RUBY_MODDOCDIR}" \
RUBY_MODEXAMPLESDIR="${RUBY_MODEXAMPLESDIR}" \
RUBY_ELISPDIR="${RUBY_ELISPDIR}"
PLIST_SUB+= RUBY_VERSION="${RUBY_VERSION}" \
RUBY_VER="${RUBY_VER}" \
RUBY_SHLIBVER="${RUBY_SHLIBVER}" \
RUBY_ARCH="${RUBY_ARCH}" \
RUBY_SUFFIX="${RUBY_SUFFIX}" \
RUBY_NAME="${RUBY_NAME}" \
RUBY_DEFAULT_SUFFIX="${RUBY_DEFAULT_SUFFIX}" \
${PLIST_RUBY_DIRS:S,DIR="${LOCALBASE}/,DIR=",}
.if ${RUBY_VER} >= 1.7
RUBY18_ONLY= ""
.elif ${RUBY_VER} >= 1.6
RUBY16_ONLY= ""
.endif
RUBY16_ONLY?= "@comment "
RUBY18_ONLY?= "@comment "
PLIST_SUB+= RUBY16_ONLY=${RUBY16_ONLY} \
RUBY18_ONLY=${RUBY18_ONLY}
# require check
.if defined(RUBY_REQUIRE)
USE_RUBY= yes
.if exists(${RUBY})
RUBY_PROVIDED!= ${RUBY} -e '\
Ruby = ${RUBY_VERSION_CODE}; \
value = begin; ${RUBY_REQUIRE}; end and puts value'
.else
RUBY_PROVIDED= "should be" # the latest version is going to be installed
.endif
.if empty(RUBY_PROVIDED)
.undef RUBY_PROVIDED
.endif
.endif
# fix shebang lines
.if defined(RUBY_SHEBANG_FILES) && !empty(RUBY_SHEBANG_FILES)
USE_RUBY= yes
post-patch: ruby-shebang-patch
ruby-shebang-patch:
@cd ${WRKSRC}; for f in ${RUBY_SHEBANG_FILES}; do \
${ECHO_MSG} "===> Fixing the #! line of $$f"; \
${RUBY} ${RUBY_FLAGS} -i -p \
-e 'if $$. == 1; ' \
-e ' if /^#!/; ' \
-e ' sub /^#!\s*\S*(\benv\s+)?\bruby/, "#!${RUBY}";' \
-e ' else;' \
-e ' $$_ = "#!${RUBY}\n" + $$_;' \
-e ' end;' \
-e 'end' \
$$f; \
done
.endif
.if defined(DEBUG)
RUBY_FLAGS+= -d
.endif
# extconf.rb
.if defined(USE_RUBY_EXTCONF)
USE_RUBY= yes
RUBY_EXTCONF?= extconf.rb
CONFIGURE_ARGS+= --with-opt-dir="${LOCALBASE}"
do-configure: ruby-extconf-configure
ruby-extconf-configure:
.if defined(RUBY_EXTCONF_SUBDIRS)
.for d in ${RUBY_EXTCONF_SUBDIRS}
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} in ${d} to configure"
@cd ${CONFIGURE_WRKSRC}/${d}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endfor
.else
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} to configure"
@cd ${CONFIGURE_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endif
.endif
# setup.rb
.if defined(USE_RUBY_SETUP)
RUBY_SETUP?= setup.rb
do-configure: ruby-setup-configure
ruby-setup-configure:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to configure"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} config ${CONFIGURE_ARGS}
do-build: ruby-setup-build
ruby-setup-build:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to build"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} setup
do-install: ruby-setup-install
ruby-setup-install:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to install"
@cd ${INSTALL_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} install
.endif
.if defined(USE_LIBRUBY)
LIB_DEPENDS+= ${DEPEND_LIBRUBY}
.endif
.if defined(USE_RUBY)
.if !defined(RUBY_NO_BUILD_DEPENDS)
EXTRACT_DEPENDS+= ${DEPEND_RUBY}
PATCH_DEPENDS+= ${DEPEND_RUBY}
BUILD_DEPENDS+= ${DEPEND_RUBY}
.endif
.if !defined(RUBY_NO_RUN_DEPENDS)
RUN_DEPENDS+= ${DEPEND_RUBY}
.endif
.endif
.if !defined(NOPORTDOCS) && defined(USE_RUBY_RDOC)
USE_RUBY_FEATURES+= rdoc
.endif
.if defined(USE_RUBY_FEATURES)
_use= ${USE_RUBY_FEATURES:Mbenchmark} \
${USE_RUBY_FEATURES:Mbigdecimal} \
${USE_RUBY_FEATURES:Mdevel-logger} \
${USE_RUBY_FEATURES:Mdl} \
${USE_RUBY_FEATURES:Mdrb} \
${USE_RUBY_FEATURES:Merb} \
${USE_RUBY_FEATURES:Mfileutils} \
${USE_RUBY_FEATURES:Mgserver} \
${USE_RUBY_FEATURES:Mipaddr} \
${USE_RUBY_FEATURES:Mopen-uri} \
${USE_RUBY_FEATURES:Mopenssl} \
${USE_RUBY_FEATURES:Moptparse} \
${USE_RUBY_FEATURES:Mpp} \
${USE_RUBY_FEATURES:Mracc-runtime} \
${USE_RUBY_FEATURES:Mrdoc} \
${USE_RUBY_FEATURES:Mrexml} \
${USE_RUBY_FEATURES:Mruby18} \
${USE_RUBY_FEATURES:Mrunit} \
${USE_RUBY_FEATURES:Mset} \
${USE_RUBY_FEATURES:Msoap} \
${USE_RUBY_FEATURES:Mstringio} \
${USE_RUBY_FEATURES:Mstrscan} \
${USE_RUBY_FEATURES:Mtestunit} \
${USE_RUBY_FEATURES:Mtsort} \
${USE_RUBY_FEATURES:Mwebrick} \
${USE_RUBY_FEATURES:Mxmlrpc} \
${USE_RUBY_FEATURES:Myaml} \
${USE_RUBY_FEATURES:Mzlib}
.if !empty(_use) && ${RUBY_VER} <= 1.6
BUILD_DEPENDS+= ${DEPEND_RUBY_SHIM18}
RUN_DEPENDS+= ${DEPEND_RUBY_SHIM18}
.endif
_use= ${USE_RUBY_FEATURES:Miconv}
.if !empty(_use)
BUILD_DEPENDS+= ${DEPEND_RUBY_ICONV}
RUN_DEPENDS+= ${DEPEND_RUBY_ICONV}
.endif
.undef _use
.endif
.if defined(USE_RUBY_AMSTD)
BUILD_DEPENDS+= ${DEPEND_RUBY_AMSTD}
RUN_DEPENDS+= ${DEPEND_RUBY_AMSTD}
.endif
# documents
RUBY_NO_RD_HTML= yes
.if defined(RUBY_RD_HTML)
.undef RUBY_NO_RD_HTML
.endif
.if (${ARCH} == alpha || ${ARCH} == sparc64) && ${RUBY_VER} <= 1.6
RUBY_NO_RD_HTML= yes
.endif
.if defined(NOPORTDOCS)
RUBY_NO_RD_HTML= yes
.endif
.if defined(RUBY_RD_FILES) && !defined(RUBY_NO_RD_HTML)
USE_RUBY_RDTOOL= yes
RUBY_RD_HTML_FILES= ${RUBY_RD_FILES:S/.rb$//:S/.rd././:S/.rd$//:S/$/.html/}
PLIST_SUB+= RUBY_RD_HTML_FILES=""
pre-install: ruby-rd-build
ruby-rd-build:
.if !empty(RUBY_RD_FILES)
@${ECHO_MSG} "===> Generating HTML documents from RD documents"
@cd ${WRKSRC}; for rd in ${RUBY_RD_FILES}; do \
html=$$(echo $$rd | ${SED} 's/\.rb$$//;s/\.rd\././;s/\.rd$$//').html; \
${ECHO_MSG} "${RUBY_RD2} $$rd > $$html"; \
${RUBY_RD2} $$rd > $$html; \
done
.else
@${DO_NADA}
.endif
.else
RUBY_RD_HTML_FILES= # empty
PLIST_SUB+= RUBY_RD_HTML_FILES="@comment "
.endif
.if !defined(NOPORTDOCS) && defined(USE_RUBY_RDTOOL)
BUILD_DEPENDS+= ${DEPEND_RUBY_RDTOOL}
.endif
.endif
Reference in New Issue View Git Blame Copy Permalink