1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-27 00:57:50 +00:00
freebsd-ports/Mk/bsd.linux-rpm.mk
Johannes Jost Meixner ed75099171 Set CentOS 6.6 as default Linux version.
Since CentOS 6.5 landed in the portstree and was updated to CentOS 6.6 and we've
fixed the remaining issues, it's time to replace Fedora 10 as Linux default --
given that in the past five years it has done its service and has long since
gone EOL upstream.

The CentOS 6 series will go End of Life in 2020, this should give us some time
to keep its annual releases up to date.

If you have not switched to using CentOS 6.6 ports, please refer to today's
UPDATING entry -- it contains detailed instructions.

If you have already switched to CentOS 6.6 userland,
you can now remove the following two lines from make.conf:

OVERRIDE_LINUX_BASE_PORT=c6
OVERRIDE_LINUX_NONBASE_PORTS=c6

If you encounter any difficulties, please follow the UPDATING entry from
20140922 but skip step 2. In case these steps do not fix the issues,
please submit an issue report in Bugzilla and send an email to FreeBSD's
emulation mailing list.

Differential Revision:	https://reviews.freebsd.org/D1145
Reviewed by:	wblock, bcr (doc), rene (emulation)
Approved by:	swills (mentor)
Approved by:	portmgr (swills)
Sponsored by:	Perceivon Hosting Inc.
2014-12-09 18:05:30 +00:00

210 lines
6.5 KiB
Makefile

#-*- tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Variables:
# LINUX_DIST - Will be used to set some dist-specific presets.
# Valid values: fedora
# LINUX_DIST_VER - Use depends upon the dist-specific presets.
# Valid values for "fedora": all version numbers
# e.g. 10 for fedora 10
# This is used to set MASTER_SITE_{,SRC_}SUBDIR
# if it isn't already set.
# MASTER_SITE_SRC_SUBDIR
# - The subdir for the src RPM's.
# DISTFILES - For simple cases this will be set automatically
# based upon the DISTNAME.
# SRC_DISTFILES - Variable which contains the corresponding src RPM's.
# If there's no corresponding src RPM, it has to be
# set to the empty value (SRC_DISTFILES= "").
# AUTOMATIC_PLIST - Generate a dynamic plist (please have a look at the
# porters handbook section which talks about plists.
# This feature is reserved for rare cases).
# BRANDELF_DIRS - A list of directories with executables to brand
# as a linux executable. The directories has to not
# contain libraries.
# BRANDELF_FILES - A list of files to brand as a linux executable in
# case BRANDELF_DIRS can't be used.
.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
Linux_RPM_Include_MAINTAINER= emulation@FreeBSD.org
Linux_RPM_Pre_Include= bsd.linux-rpm.mk
EXTRACT_SUFX?= .${LINUX_RPM_ARCH}.rpm
SRC_SUFX?= .src.rpm
USE_LINUX?= yes
USE_LINUX_PREFIX= yes
NO_WRKSUBDIR= yes
NO_BUILD= yes
. if ${ARCH} == "amd64" || ${ARCH} == "i386"
. if ${USE_LINUX} == "c6" || ${USE_LINUX} == "yes" # default to CentOS
# Do not build CentOS 6 ports if overridden by f10
. if defined(OVERRIDE_LINUX_BASE_PORT) && ${OVERRIDE_LINUX_NONBASE_PORTS} == "f10"
IGNORE= This port requires CentOS ${LINUX_DIST_VER}. Please remove OVERRIDE_LINUX_NONBASE_PORTS=f10 in /etc/make.conf.
. endif
LINUX_RPM_ARCH?= i686 # ?= because of nasty c5 qt ports
. elif ${USE_LINUX} == "f10"
# Do not build Fedora 10 ports unless specifically overridden.
#. if ! defined(OVERRIDE_LINUX_NONBASE_PORTS) || ${OVERRIDE_LINUX_NONBASE_PORTS} != "f10"
#IGNORE= This port requires Fedora 10, yet Fedora 10 is heavily outdated and contains many vulnerable ports. If you really need it, add OVERRIDE_LINUX_NONBASE_PORTS=f10 in /etc/make.conf.
#. endif
LINUX_RPM_ARCH?= i386 # the linuxulator does not yet support amd64 code
. else
LINUX_RPM_ARCH?= ${ARCH}
. endif
. elif ${ARCH} == "powerpc"
LINUX_RPM_ARCH?= ppc
. endif
.endif
.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
Linux_RPM_Post_Include= bsd.linux-rpm.mk
.if ${USE_LINUX} == "f10"
USE_LINUX?= "f10"
LINUX_DIST= fedora
LINUX_DIST_VER= 10
.else # default to CentOS
LINUX_DIST= centos
LINUX_DIST_VER= 6.6
.endif
. if defined(LINUX_DIST)
DIST_SUBDIR?= rpm/${LINUX_RPM_ARCH}/${LINUX_DIST}/${LINUX_DIST_VER}
. if ${LINUX_DIST} == "fedora"
# we do not want to define MASTER_SITES and MASTER_SITE_* if they are already defined
# ex.: MASTER_SITES=file:///...
. ifndef MASTER_SITES
MASTER_SITES= ${MASTER_SITE_FEDORA_LINUX}
. if ${LINUX_DIST_VER} == 10
MASTER_SITE_SUBDIR?= ../releases/${LINUX_DIST_VER}/Everything/${LINUX_RPM_ARCH}/os/Packages \
../updates/${LINUX_DIST_VER}/${LINUX_RPM_ARCH}
MASTER_SITE_SRC_SUBDIR?= ../releases/${LINUX_DIST_VER}/Everything/source/SRPMS \
../updates/${LINUX_DIST_VER}/SRPMS
. else
MASTER_SITE_SUBDIR?= ${LINUX_DIST_VER}/${LINUX_RPM_ARCH}/os/Fedora/RPMS \
updates/${LINUX_DIST_VER}/${LINUX_RPM_ARCH}
MASTER_SITE_SRC_SUBDIR?= ${LINUX_DIST_VER}/SRPMS \
updates/${LINUX_DIST_VER}/SRPMS
. endif
. endif
. elif ${LINUX_DIST} == "centos"
MASTER_SITES_SUBDIR= /centos/6/os/i386/Packages/
. if ${LINUX_DIST_VER} == "5" #needed for Qt...
LINUX_RPM_ARCH= i386
MASTER_SITES_SUBDIR= /centos/5/os/i386/Packages/
. endif
. ifndef MASTER_SITES
MASTER_SITES= ${MASTER_SITE_CENTOS_LINUX}
. if ${LINUX_DIST_VER} == "6.6"
. if ! defined(PACKAGE_BUILDING)
MASTER_SITES= http://mirror.centos.org/centos/6/os/i386/Packages/
MASTER_SITES_SUBDIR= /centos/6/os/i386/Packages/
. else
MASTER_SITES?= http://vault.centos.org/%SUBDIR%/
MASTER_SITES_SUBDIR= /${LINUX_DIST_VER}/os/Source/SPackages/
. endif
. else
MASTER_SITES= http://vault.centos.org/${LINUX_DIST_VER}/os/i386/Packages/
. endif
. endif
. endif
. endif
#.if ${USE_LINUX:L} == "yes" #redundant with bsd.port.mk fu
#USE_LINUX= c6
#.endif
PKGNAMEPREFIX?= linux-${USE_LINUX}-
# DISTFILES and SRC_DISTFILES assume that there is only one bindist
# and one src file.
# Please, define them in the Makefile of the port in case this assumption
# is not true.
DISTVERSION= ${PORTVERSION}-${RPMVERSION}
DISTNAME?= ${PORTNAME}-${DISTVERSION}
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
BIN_DISTFILES:= ${DISTFILES}
SRC_DISTFILES?= ${DISTNAME}${SRC_SUFX}
EXTRACT_ONLY?= ${BIN_DISTFILES:C/:[^:]+$//}
. if defined(PACKAGE_BUILDING)
DISTFILES+= ${SRC_DISTFILES}
MASTER_SITE_SUBDIR+= ${MASTER_SITE_SRC_SUBDIR}
ALWAYS_KEEP_DISTFILES= yes
. endif
EXTRACT_CMD?= ${TAR}
EXTRACT_BEFORE_ARGS?= -xf
EXTRACT_AFTER_ARGS?=
DISTINFO_FILE?= ${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
BRANDELF_DIRS?=
BRANDELF_FILES?=
# For ports that define PORTDOCS, be sure not to install
# documentation if NOPORTDOCS is defined
. if defined(PORTDOCS) && defined(NOPORTDOCS)
pre-patch: linux-rpm-clean-portdocs
. if !target(linux-rpm-clean-portdocs)
linux-rpm-clean-portdocs:
. for x in ${PORTDOCS}
@${RM} -f ${WRKDIR}/${DOCSDIR_REL}/${x}
. endfor
@${RMDIR} ${WRKDIR}/${DOCSDIR_REL}
. endif
. endif
. if defined(AUTOMATIC_PLIST)
. if ${USE_LINUX} == "f10" || ${USE_LINUX} == "yes"
_LINUX_BASE_SUFFIX= f10
. elif ${USE_LINUX} == "c6"
USE_LINUX= c6
_LINUX_BASE_SUFFIX= c6
. else
# other linux_base ports do not provide a pkg-plist file
IGNORE= uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"f10\" and \"c6\"
. endif
PLIST?= ${WRKDIR}/.PLIST.linux-rpm
pre-install: linux-rpm-generate-plist
. if !target(linux-rpm-generate-plist)
linux-rpm-generate-plist:
cd ${WRKSRC} && \
${FIND} * ! -path "stage/*" ! -type d | ${SORT} > ${PLIST}
. endif
. endif
. if !target(do-install)
do-install:
. if ${BRANDELF_DIRS}
@cd ${WRKSRC} && ${FIND} ${BRANDELF_DIRS} -type f -print0 \
| ${XARGS} -0 ${FILE} | ${GREP} ELF | ${CUT} -d : -f 1 \
| ${XARGS} ${BRANDELF} -t Linux
. endif
. if ${BRANDELF_FILES}
@cd ${WRKSRC} && ${BRANDELF} -t Linux ${BRANDELF_FILES}
. endif
cd ${WRKSRC} && ${FIND} * ! -path "stage*" -type d -exec ${MKDIR} "${STAGEDIR}${PREFIX}/{}" \;
cd ${WRKSRC} && ${FIND} * ! -path "stage/*" ! -type d | ${CPIO} -pm -R root:wheel ${STAGEDIR}${PREFIX}
. endif
.endif