1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-05 01:55:52 +00:00
freebsd-ports/sysutils/nut22/Makefile
2011-07-28 12:43:22 +00:00

185 lines
4.9 KiB
Makefile

# New ports collection makefile for: nut
# Date created: 08 Jan 2000
# Whom: Boris Popov <bp@freebsd.org>
#
# $FreeBSD$
#
PORTNAME= nut
PORTVERSION= 2.2.2
PORTREVISION= 6
CATEGORIES= sysutils
MASTER_SITES= http://www.networkupstools.org/source/${PORTVERSION:R}/
DISTFILES= ${DISTNAME}${EXTRACT_SUFX} ${DISTNAME}${EXTRACT_SUFX}.sig
EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX}
MAINTAINER= ports@FreeBSD.org
COMMENT= Network UPS Tools
USE_AUTOTOOLS= autoconf
GNU_CONFIGURE= yes
USE_GMAKE= yes
USE_LDCONFIG= yes
USE_GNOME= pkgconfig
NO_LATEST_LINK= yes
NUT_USER?= uucp
NUT_GROUP?= uucp
STATEDIR?= /var/db/nut
OPTIONS= SERIAL "SERIAL support" on \
USB "USB support" on \
SNMP "SNMP support" on \
NEON "NEON XML/HTTP support" on \
HAL "HAL support" off \
IPV6 "IPV6 support" on \
DEVEL "Install header files" off \
CGI "Web CGI interface" off \
USE_RC_SUBR= nut.sh nut_upsmon.sh nut_upslog.sh
SUB_LIST+= STATEDIR=${STATEDIR}
PLIST_SUB+= STATEDIR=${STATEDIR}
MAN5= ups.conf.5 upsd.conf.5 upsd.users.5 upsmon.conf.5 \
upssched.conf.5
MAN8= nutupsdrv.8 upsc.8 upscmd.8 upsd.8 upsdrvctl.8 \
upslog.8 upsmon.8 upsrw.8 upssched.8
PORTDOCS= *
.include <bsd.port.pre.mk>
CONFIGURE_ARGS= --sysconfdir=${PREFIX}/etc/nut \
--program-transform-name="" \
--localstatedir=${STATEDIR} \
--datadir=${PREFIX}/etc/nut \
--with-drvpath=${PREFIX}/libexec/nut \
--with-statepath=${STATEDIR} \
--with-altpidpath=${STATEDIR} \
--with-pidpath=${STATEDIR} \
--with-pkgconfig-dir=${PREFIX}/libdata/pkgconfig \
--with-linux-hiddev=no \
--with-user=${NUT_USER} \
--with-group=${NUT_GROUP}
.if defined(WITH_CGI)
LIB_DEPENDS+= gd.4:${PORTSDIR}/graphics/gd
MAN5+= hosts.conf.5 upsset.conf.5 upsstats.html.5
MAN8+= upsset.cgi.8 upsstats.cgi.8 upsimage.cgi.8
CGIDIR?= ${PREFIX}/www/cgi-bin/${PORTNAME}
CGIDIR_REL?= ${CGIDIR:S,^${PREFIX}/,,}
CONFIGURE_ARGS+= --with-cgi --with-cgipath=${CGIDIR} \
--with-htmlpath=${WWWDIR} \
--with-gd-includes=-I${PREFIX}/include \
--with-gd-libs="-L${PREFIX}/lib -lgd"
PLIST_SUB+= NUT_CGI=""
PLIST_SUB+= CGIDIR="${CGIDIR_REL}"
PLIST_SUB+= CGIETCDIR="etc/nut/"
.else
CONFIGURE_ARGS+= --without-cgi
PLIST_SUB+= NUT_CGI="@comment "
.endif
.if !defined(WITHOUT_SERIAL)
CONFIGURE_ARGS+= --with-serial
MAN8+= al175.8 apcsmart.8 bcmxcp.8 belkin.8 belkinunv.8 \
bestuferrups.8 bestups.8 bestfcom.8 cpsups.8 cyberpower.8 \
dummy-ups.8 etapro.8 everups.8 gamatronic.8 genericups.8 \
isbmex.8 liebert.8 masterguard.8 megatec.8 metasys.8 \
mge-shut.8 mge-utalk.8 nitram.8 oneac.8 optiups.8 \
powercom.8 powerpanel.8 rhino.8 safenet.8 solis.8 tripplite.8 \
tripplitesu.8 upscode2.8 victronups.8
PLIST_SUB+= NUT_SERIAL=""
.else
CONFIGURE_ARGS+= --without-serial
PLIST_SUB+= NUT_SERIAL="@comment "
.endif
.if !defined(WITHOUT_USB)
. if ${OSVERSION} < 800069
LIB_DEPENDS+= usb-0.1.8:${PORTSDIR}/devel/libusb
. else
EXTRA_PATCHES= ${FILESDIR}/extra-patch-m4_nut_check_libusb.m4
. endif
CONFIGURE_ARGS+= --with-usb=auto
MAN8+= bcmxcp_usb.8 megatec_usb.8 tripplite_usb.8 usbhid-ups.8
PLIST_SUB+= NUT_USB=""
.else
CONFIGURE_ARGS+= --without-usb
PLIST_SUB+= NUT_USB="@comment "
.endif
.if !defined(WITHOUT_SNMP)
LIB_DEPENDS+= netsnmp.30:${PORTSDIR}/net-mgmt/net-snmp
CONFIGURE_ARGS+= --with-snmp
MAN8+= snmp-ups.8
PLIST_SUB+= NUT_SNMP=""
.else
CONFIGURE_ARGS+= --without-snmp
PLIST_SUB+= NUT_SNMP="@comment "
.endif
.if !defined(WITHOUT_NEON)
LIB_DEPENDS+= neon.27:${PORTSDIR}/www/neon29
CONFIGURE_ARGS+= --with-neonxml
MAN8+= netxml-ups.8
PLIST_SUB+= NUT_NEON=""
.else
CONFIGURE_ARGS+= --without-neonxml
PLIST_SUB+= NUT_NEON="@comment "
.endif
.if defined(WITH_HAL)
. if defined(WITHOUT_USB)
BROKEN= HAL is only usable with USB support enabled. Run 'make config' again!
. endif
LIB_DEPENDS+= hal.1:${PORTSDIR}/sysutils/hal
CONFIGURE_ARGS+= --with-hal
#MAN8+=
PLIST_SUB+= NUT_HAL=""
.else
CONFIGURE_ARGS+= --without-hal
PLIST_SUB+= NUT_HAL="@comment "
.endif
.if !defined(WITHOUT_IPV6)
CONFIGURE_ARGS+= --with-ipv6
.else
CONFIGURE_ARGS+= --without-ipv6
.endif
.if defined(WITH_DEVEL)
CONFIGURE_ARGS+= --with-dev
MAN3+= upscli_connect.3 upscli_disconnect.3 upscli_fd.3 \
upscli_get.3 upscli_list_next.3 upscli_list_start.3 \
upscli_readline.3 upscli_sendline.3 upscli_splitaddr.3 \
upscli_splitname.3 upscli_ssl.3 upscli_strerror.3 \
upscli_upserror.3 upsclient.3
PLIST_SUB+= NUT_DEVEL=""
.else
CONFIGURE_ARGS+= --without-dev
PLIST_SUB+= NUT_DEVEL="@comment "
.endif
pre-install:
@${MKDIR} ${PREFIX}/libexec/nut
@${MKDIR} ${STATEDIR}
@${CHOWN} ${NUT_USER}:${NUT_GROUP} ${STATEDIR}
@${CHMOD} 0750 ${STATEDIR}
.if !defined(NOPORTDOCS)
post-install:
@${MKDIR} ${DOCSDIR}/cables
${INSTALL_DATA} ${WRKSRC}/docs/cables/*.txt ${DOCSDIR}/cables
${INSTALL_DATA} ${WRKSRC}/docs/*.txt ${DOCSDIR}
${INSTALL_DATA} ${WRKSRC}/docs/FAQ ${DOCSDIR}
.for file in AUTHORS COPYING ChangeLog INSTALL MAINTAINERS NEWS README UPGRADING
${INSTALL_DATA} ${WRKSRC}/${file} ${DOCSDIR}
.endfor
.endif
.include <bsd.port.post.mk>