mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-29 05:38:00 +00:00
Code Issues Releases Activity
bee89b79f6
freebsd-ports/Mk/Uses/qt-dist.mk
Tobias C. Berner b1ab2e076f qt.mk, qt-dist.mk: build back support for Qt4 
- try to keep it easy to adapt for the upcoming Qt6.
2019-03-17 07:48:27 +00:00

366 lines
14 KiB
Makefile
Raw Blame History

# $FreeBSD$
#
# There are three Qt related USES files with different access to Qt.
# - qmake: The port requires Qt's qmake to build -- creates the configure target
# - auto includes qt.mk
# - qt-dist: The port is a port for an part of Qt5
# - auto inclues qt.mk
# - qt.mk - Dependency handling. USE_QT=foo bar
#
#
# Usage
# qt-dist:<version>[,yes|modulename]
.if !defined(_QT_DIST_MK_INCLUDED)
_QT_DIST_MK_INCLUDED= qt-dist.mk
# Suck in qt.mk and qmake.mk
qt_ARGS?= # empty
.include "${USESDIR}/qt.mk"
qmake_ARGS?= # empty
.include "${USESDIR}/qmake.mk"
# Supported distribution arguments
_QT5_DISTS= 3d activeqt androidextras base canvas3d charts connectivity \
datavis3d declarative doc gamepad graphicaleffects imageformats \
location macextras multimedia networkauth purchasing \
quickcontrols2 quickcontrols remoteobjects script scxml sensors \
serialbus serialport speech svg tools translations \
virtualkeyboard wayland webchannel webengine websockets webview \
winextras x11extras xmlpatterns
_QT_DISTS= ${_QT${_QT_VER}_DISTS}
# We only accept one item as an argument. The fetch target further below works
# around this.
_QT_DIST= # empty
. for dist in ${_QT_DISTS:O:u}
. if ${qt-dist_ARGS:M${dist}}
. if empty(_QT_DIST)
_QT_DIST= ${dist}
. else
IGNORE= cannot be installed: different Qt dists specified via qt-dist:[${qt-dist_ARGS:S/ /,/g}]
. endif
. endif
. endfor
# Fall back to sensible defaults for _QT_DIST
. if empty(_QT_DIST)
. if ${_QT_VER:M5}
_QT_DIST= ${PORTNAME} # don't force qt-dist to be set for Qt5 ports which 75% of time are ${PORTNAME}
. endif
. endif
# Check validitiy
. if empty(_QT_DISTS:M${_QT_DIST})
IGNORE= Unsupported qt-dist ${_QT_DIST} for qt:${_QT_VER}
. endif
################################################################################
# Set standard bsd.port.mk variables
MASTER_SITES= ${MASTER_SITE_QT}
DISTINFO_FILE?= ${PORTSDIR}/devel/${_QT_RELNAME}/distinfo
LICENSE?= LGPL21
. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${PORTSDIR}/devel/${_QT_RELNAME}/pkg-descr
. endif
# Stage support.
DESTDIRNAME= INSTALL_ROOT
. if ${_QT_VER:M5}
MASTER_SITE_SUBDIR?= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/
# www/qt5-webengine hackery: The tarballs of 5.9.5 had a different naming scheme.
. if ${QT5_VERSION} == "5.9.5"
DISTNAME= ${_QT_DIST:S,^,qt,:S,$,-opensource-src-${DISTVERSION},}
. else
DISTNAME= ${_QT_DIST:S,^,qt,:S,$,-everywhere-src-${DISTVERSION},}
. endif
DISTFILES= ${DISTNAME:S,$,${EXTRACT_SUFX},}
DIST_SUBDIR= KDE/Qt/${_QT_VERSION}
# Qt (at least when used with qmake) has a tendency to overlink: some libraries
# have dependencies on others in the mkspec configurations and the latter are
# always passed to the linker even if they are not actually used. By passing
# --as-needed to the linker by default when building the Qt ports we do not
# have to declare a lot of unnecessary dependencies in USE_QT5.
LDFLAGS+= -Wl,--as-needed
. if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${PORTSDIR}/devel/${_QT_RELNAME}
_QT_DIST= ${_QT5_DISTS}
. endif
. endif
# Qt5's tarballs are xz compressed.
. if empty(USES:Mtar)
EXTRACT_SUFX?= .tar.xz
. endif
. if ${_QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.
.include "${USESDIR}/pkgconfig.mk"
. endif
# -nomake is only used by qtbase's configure script.
# Other ports from other Qt modules will automatically build examples and
# tests if the directories exist because of mkspecs/features/qt_parts.prf.
EXTRACT_AFTER_ARGS?= ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \
${DISTNAME:S,$,/tests,:S,^,--exclude ,}
. endif # ! ${_QT_VER:M5}
CONFIGURE_ENV+= MAKE="${MAKE:T}"
CONFIGURE_ARGS+= -opensource -confirm-license \
-no-pch \
-prefix ${PREFIX} \
-bindir ${PREFIX}/${QT_BINDIR_REL} \
-headerdir ${PREFIX}/${QT_INCDIR_REL} \
-libdir ${PREFIX}/${QT_LIBDIR_REL} \
-plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \
-importdir ${PREFIX}/${QT_IMPORTDIR_REL} \
-datadir ${PREFIX}/${QT_DATADIR_REL} \
-docdir ${PREFIX}/${QT_DOCDIR_REL} \
-translationdir ${PREFIX}/${QT_L10NDIR_REL} \
-sysconfdir ${PREFIX}/${QT_ETCDIR_REL}
. if ${_QT_VER:M5}
CONFIGURE_ARGS+= -nomake examples -nomake tests \
-platform ${QMAKESPECNAME} \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+= -no-sse2
. endif
# Work around a bug in current binutils, where the gold linker creates
# duplicate symbols. See pr 218187. Disable the gold-linker for Qt5 ports.
CONFIGURE_ARGS+= -no-use-gold-linker
# Pass -recheck-all so that multiple calls to the configure script really
# re-run all checks.
CONFIGURE_ARGS+= -recheck-all
. endif # ${_QT_VER:M5}
. if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+= -debug -separate-debug-info
# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"
. else
CONFIGURE_ARGS+= -release -no-separate-debug-info
QMAKE_ARGS+= QT_CONFIG+="release" \
QT_CONFIG-="debug separate_debug_info"
. endif # defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
. if defined(WANT_QT_VERBOSE_CONFIGURE)
CONFIGURE_ARGS+= -verbose
. endif
. if ${_QT_DIST} == "base"
_EXTRA_PATCHES_QT5= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_common_bsd_bsd.conf
. if ${ARCH:Mmips*} || ${ARCH:Mpowerpc*} || ${ARCH} == sparc64
_EXTRA_PATCHES_QT5+= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_g++-base.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_gcc-base.conf
USE_GCC= yes
. endif
EXTRA_PATCHES?= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${_EXTRA_PATCHES_QT5}
. endif # ${_QT_DIST} == "base"
# Override settings installed in qconfig.h and *.pri files. The flags will be
# installed along with the port, but have to be passed as arguments while
# building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups")
# are needed to disable some features.
. if !defined(${QT_MODNAME}) || empty(${QT_MODNAME})
# Used for both qconfig-*.h and qt_config_*.pri; it can't be empty.
QT_MODNAME= ${PORTNAME}
. endif
QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix).
QT_CONFIG?= # For *.pri files QT_CONFIG flags.
. if ${QT_DEFINES}
QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}"
. if ${QT_DEFINES:N-*}
# Use a script to cleanup qconfig-modules.h (see qt-post-install).
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
. endif
. endif # ${QT_DEFINES}
. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif
. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif
# Add a RUN_DEPENDS on misc/qtchooser to select the binaries.
# The binaries of both supported Qt versions are installed to
# ${LOCALBASE}/lib/qt${_QT_VER}/bin. The port misc/qtchooser installs
# wrapper binaries into ${LOCALBASE}/bin, and chooses the correct
# one depending on the value of QT_SELECT (which we pass to both
# CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports
# RUN_DEPEND on it.
RUN_DEPENDS+= qtchooser:misc/qtchooser
PLIST_SUB+= SHORTVER=${DISTVERSION:R} \
FULLVER=${DISTVERSION:C/-.*//}
# Handle additional PLIST directories, which should only be used for Qt-dist ports.
. for dir in CMAKE ETC
# Export QT_CMAKEDIR and QT_ETCDIR.
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endfor
. if ${_QT_VER:M5}
. if ${_QT_DIST} == "base"
# qtbase requires some tools to be symlinked to the build directory.
_QT_TOOLS= # empty
. if ${PORTNAME} != "qmake"
_QT_TOOLS+= ${QMAKE}
. endif
. if ${PORTNAME} != "buildtools"
_QT_TOOLS+= ${MOC} ${RCC}
. endif
. if ${PORTNAME} != "qdoc"
_QT_TOOLS+= qdoc
. endif
. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif
. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}
. endif
# The list of QtBase components that need to be linked into WRKSRC/lib for
# other QtBase ports. See below.
_QT5_BASE= core dbus gui network sql widgets
.if ${_QT_VER:M5}
post-patch: gcc-post-patch
gcc-post-patch:
${REINPLACE_CMD} 's|%%LOCALBASE%%|${LOCALBASE}|' ${WRKSRC}/mkspecs/common/gcc-base.conf
${REINPLACE_CMD} 's|%%GCC_DEFAULT%%|${GCC_DEFAULT}|' ${WRKSRC}/mkspecs/common/gcc-base.conf \
${WRKSRC}/mkspecs/common/g++-base.conf
.endif
pre-configure: qtbase-pre-configure
qtbase-pre-configure:
. for tool in ${_QT_TOOLS}
@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \
${TRUE}
. endfor
# The following is a fix for the inplace upgrade problem we faced (see
# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
# would often gets added by pkgconf for the dependencies, was passed after
# ${WRKSRC}/lib.
# * We fix the inplace upgrade problem by moving the Qt5 libraries into
# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
# * However, this means, that the ports belonging to the split up QtBase package
# now no longer can find their depending QtBase libraries. We fix this by
# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
# on them.
. if ${_QT_DIST:Mbase}
. for basedep in ${_QT5_BASE}
. if ! empty(USE_QT:M${basedep})
${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
. endif
. endfor
. endif
#
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.
post-patch: qtbase-post-patch
qtbase-post-patch:
${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}//mkspecs/common/bsd/bsd.conf
. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake
. endif
. endif
pre-configure: qt5-pre-configure
qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
#
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
${ECHO_CMD} 'QMAKE_LIBDIR_FLAGS = -L${CONFIGURE_WRKSRC}/lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache
${ECHO_CMD} 'QMAKE_DEFAULT_LIBDIRS = ${LOCALBASE}/lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache
${ECHO_CMD} 'QMAKE_DEFAULT_INCDIRS = ${LOCALBASE}/include' >> ${CONFIGURE_WRKSRC}/.qmake.cache
post-install: qt-post-install
qt-post-install:
. if ${QT_DEFINES:N-*}
# We can't use SUB_FILES with a shared pkg-deinstall.in.
# We need it to be a script instead of a group of @unexecs, otherwise
# qconfig-modules.h cleanup will be run in pre-deinstall stage, which is
# useless. This will probably be replaced by a Keywords/ script in the future.
@${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \
-e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \
${PORTSDIR}/devel/${_QT_RELNAME}/${FILESDIR:T}/${PKGDEINSTALL:T}.in > \
${PKGDEINSTALL}
@${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules
@${ECHO_CMD} -n \
> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. for def in ${QT_DEFINES:N-*:O:u:C/=.*$//}
@${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
${ECHO_CMD} "# define QT_${def}" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} "#endif" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. endfor
@${ECHO_CMD} "${PREFIX}/${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \
>> ${TMPPLIST}
@${ECHO_CMD} "@exec echo '#include <QtCore/modules/qconfig-${QT_MODNAME}.h>' >> ${PREFIX}/${QT_INCDIR_REL}/QtCore/qconfig-modules.h" \
>> ${TMPPLIST}
. endif # ${QT_DEFINES:N-*}
. if ${QT_CONFIG:N-*}
@${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules
${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \
> ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri
@${ECHO_CMD} "${PREFIX}/${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \
>> ${TMPPLIST}
. endif # ${QT_CONFIG:N-*}
. endif # M5
.endif # defined(_QT_DIST_MK_INCLUDED)
Reference in New Issue View Git Blame Copy Permalink