1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-29 05:38:00 +00:00
freebsd-ports/Mk/bsd.gecko.mk
Jan Beich 44319ef4b0 www/firefox: update to 66.0
Changes:	https://www.mozilla.org/firefox/66.0/releasenotes/
PR:		235300
Security:	05da6b56-3e66-4306-9ea3-89fafe939726
MFH:		2019Q1
Differential Revision:	https://reviews.freebsd.org/D19020
2019-03-12 00:55:59 +00:00

537 lines
16 KiB
Makefile

#-*- tab-width: 4; -*-
# ex:ts=4
#
# Date created: 12 Nov 2005
# Whom: Michael Johnson <ahze@FreeBSD.org>
#
# $FreeBSD$
#
# 4 column tabs prevent hair loss and tooth decay!
# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
# and porters to support any available gecko backend without needing to build
# many conditional tests. ${USE_GECKO} is the list of backends that your port
# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
# Users set ${WITH_GECKO} to the list of gecko backends they want on their
# system.
.if defined(USE_GECKO)
.if !defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
Gecko_Pre_Include= bsd.gecko.mk
# This file contains some reusable components for mozilla ports. It's of
# use primarily to apps from the mozilla project itself (such as Firefox,
# Thunderbird, etc.), and probably won't be of use for gecko-based ports
# like epiphany, galeon, etc.
#
# You need to make sure to add USE_GECKO=gecko to for your port can uses
# one of these options below.
#
# Ports can use the following:
#
# USE_MOZILLA By default, it enables every system dependency
# listed in '_ALL_DEPENDS'. If your port doesn't
# need one of those then you can use '-' like
# 'USE_MOZILLA= -png -vpx' to subtract the
# dependencies. Experimental deps use '+' like
# 'USE_MOZILLA= +speex +theora'.
#
# MOZILLA_PLIST_DIRS List of directories to descend into when installing
# and creating the plist
#
# MOZ_PIS_SCRIPTS List of scripts residing in ${FILESDIR} to be
# filtered through MOZCONFIG_SED and installed along
# with our Pluggable Init Scripts (PIS)
#
# MOZ_SED_ARGS sed(1) commands through which MOZ_PIS_SCRIPTS are
# filtered. There is a default set defined here, so
# you probably want to add to MOZ_SED_ARGS rather
# than clobber it
#
# MOZ_OPTIONS configure arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# CONFIGURE_ARGS+=${MOZ_OPTIONS}
#
# MOZ_MK_OPTIONS The make(1) arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# MAKE_ARGS+=${MOZ_MK_OPTIONS}
#
# MOZ_EXPORT Environment variables for the build process (added
# to .mozconfig). If NOMOZCONFIG is defined, you
# probably want to set MAKE_ENV+=${MOZ_EXPORT}
#
# MOZ_CHROME A variable for the --enable-chrome-format= in
# CONFIGURE_ARGS. The default is omni.
#
# MOZ_TOOLKIT A variable for the --enable-default-toolkit= in
# CONFIGURE_ARGS. The default is cairo-gtk2.
#
# PORT_MOZCONFIG Defaults to ${FILESDIR}/mozconfig.in, but can be
# set to a generic mozconfig included with the port
#
# NOMOZCONFIG Don't drop a customized .mozconfig into the build
# directory. Options will have to be specified in
# CONFIGURE_ARGS instead
#
MAINTAINER?= gecko@FreeBSD.org
MOZILLA?= ${PORTNAME}
MOZILLA_VER?= ${PORTVERSION}
MOZILLA_BIN?= ${PORTNAME}-bin
MOZILLA_EXEC_NAME?=${MOZILLA}
MOZ_RPATH?= ${MOZILLA}
USES+= compiler:c++17-lang cpe gl gmake iconv localbase perl5 pkgconfig \
python:2.7,build desktop-file-utils
CPE_VENDOR?=mozilla
USE_GL= gl
USE_PERL5= build
USE_XORG= x11 xcb xcomposite xdamage xext xfixes xrender xt
HAS_CONFIGURE= yes
CONFIGURE_OUTSOURCE= yes
BUNDLE_LIBS= yes
.if ${MOZILLA_VER:R:R} >= 56
BUILD_DEPENDS+= llvm${LLVM_DEFAULT}>0:devel/llvm${LLVM_DEFAULT}
MOZ_EXPORT+= LLVM_CONFIG=llvm-config${LLVM_DEFAULT}
# Require newer Clang than what's in base system unless user opted out
. if ${CC} == cc && ${CXX} == c++ && exists(/usr/lib/libc++.so)
BUILD_DEPENDS+= ${LOCALBASE}/bin/clang${LLVM_DEFAULT}:devel/llvm${LLVM_DEFAULT}
CPP= ${LOCALBASE}/bin/clang-cpp${LLVM_DEFAULT}
CC= ${LOCALBASE}/bin/clang${LLVM_DEFAULT}
CXX= ${LOCALBASE}/bin/clang++${LLVM_DEFAULT}
USES:= ${USES:Ncompiler\:*} # XXX avoid warnings
. endif
.endif
.if ${MOZILLA_VER:R:R} >= 61
BUILD_DEPENDS+= ${LOCALBASE}/bin/python${PYTHON3_DEFAULT}:lang/python${PYTHON3_DEFAULT:S/.//g}
MOZ_EXPORT+= PYTHON3="${LOCALBASE}/bin/python${PYTHON3_DEFAULT}"
.endif
.if ${MOZILLA_VER:R:R} >= 63
BUILD_DEPENDS+= rust-cbindgen>=0.6.8:devel/rust-cbindgen \
node:www/node
.endif
.if ${MOZILLA_VER:R:R} < 64
MOZ_OPTIONS+= --enable-pie
.endif
MOZILLA_SUFX?= none
MOZSRC?= ${WRKSRC}
PLISTF?= ${WRKDIR}/plist_files
MOZ_PIS_DIR?= lib/${MOZILLA}/init.d
PORT_MOZCONFIG?= ${FILESDIR}/mozconfig.in
MOZCONFIG?= ${WRKSRC}/.mozconfig
MOZILLA_PLIST_DIRS?= bin lib share/pixmaps share/applications
PKGINSTALL?= ${WRKDIR}/pkg-install
PKGDEINSTALL?= ${WRKDIR}/pkg-deinstall
PKGINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-install.in
PKGDEINSTALL_INC?= ${.CURDIR}/../../www/firefox/files/pkg-deinstall.in
MOZ_PKGCONFIG_FILES?= ${MOZILLA}-gtkmozembed ${MOZILLA}-js \
${MOZILLA}-xpcom ${MOZILLA}-plugin
MOZ_EXPORT+= ${CONFIGURE_ENV} \
RUSTFLAGS="${RUSTFLAGS}" \
PERL="${PERL}" \
ac_cv_clock_monotonic=
MOZ_OPTIONS+= --prefix="${PREFIX}"
MOZ_MK_OPTIONS+=MOZ_OBJDIR="${BUILD_WRKSRC}"
LDFLAGS+= -Wl,--as-needed
# Adjust -C target-cpu if -march/-mcpu is set by bsd.cpu.mk
.if ${ARCH} == amd64 || ${ARCH} == i386
RUSTFLAGS+= ${CFLAGS:M-march=*:S/-march=/-C target-cpu=/}
.else
RUSTFLAGS+= ${CFLAGS:M-mcpu=*:S/-mcpu=/-C target-cpu=/}
.endif
# Standard depends
_ALL_DEPENDS= event ffi graphite harfbuzz hunspell icu jpeg nspr nss png pixman sqlite vpx webp
event_LIB_DEPENDS= libevent.so:devel/libevent
event_MOZ_OPTIONS= --with-system-libevent
ffi_LIB_DEPENDS= libffi.so:devel/libffi
ffi_MOZ_OPTIONS= --enable-system-ffi
.if exists(${FILESDIR}/patch-bug847568)
graphite_LIB_DEPENDS= libgraphite2.so:graphics/graphite2
graphite_MOZ_OPTIONS= --with-system-graphite2
harfbuzz_LIB_DEPENDS= libharfbuzz.so:print/harfbuzz
harfbuzz_MOZ_OPTIONS= --with-system-harfbuzz
.endif
hunspell_LIB_DEPENDS= libhunspell-1.7.so:textproc/hunspell
hunspell_MOZ_OPTIONS= --enable-system-hunspell
icu_LIB_DEPENDS= libicui18n.so:devel/icu
icu_MOZ_OPTIONS= --with-system-icu --with-intl-api
-jpeg_BUILD_DEPENDS=yasm:devel/yasm
jpeg_USES= jpeg
jpeg_MOZ_OPTIONS= --with-system-jpeg=${LOCALBASE}
nspr_LIB_DEPENDS= libnspr4.so:devel/nspr
nspr_MOZ_OPTIONS= --with-system-nspr
nss_LIB_DEPENDS= libnss3.so:security/nss
nss_MOZ_OPTIONS= --with-system-nss
pixman_LIB_DEPENDS= libpixman-1.so:x11/pixman
pixman_MOZ_OPTIONS= --enable-system-pixman
png_LIB_DEPENDS= libpng.so:graphics/png
png_MOZ_OPTIONS= --with-system-png=${LOCALBASE}
sqlite_LIB_DEPENDS= libsqlite3.so:databases/sqlite3
sqlite_MOZ_OPTIONS= --enable-system-sqlite
-vpx_BUILD_DEPENDS= yasm:devel/yasm
vpx_LIB_DEPENDS= libvpx.so:multimedia/libvpx
vpx_MOZ_OPTIONS= --with-system-libvpx
webp_LIB_DEPENDS= libwebp.so:graphics/webp
webp_MOZ_OPTIONS= --with-system-webp
.for use in ${USE_MOZILLA}
${use:S/-/_WITHOUT_/}= ${TRUE}
.endfor
LIB_DEPENDS+= libfontconfig.so:x11-fonts/fontconfig \
libfreetype.so:print/freetype2
.for dep in ${_ALL_DEPENDS} ${USE_MOZILLA:M+*:S/+//}
.if !defined(_WITHOUT_${dep})
BUILD_DEPENDS+= ${${dep}_BUILD_DEPENDS}
LIB_DEPENDS+= ${${dep}_LIB_DEPENDS}
RUN_DEPENDS+= ${${dep}_RUN_DEPENDS}
USES+= ${${dep}_USES}
MOZ_OPTIONS+= ${${dep}_MOZ_OPTIONS}
.else
BUILD_DEPENDS+= ${-${dep}_BUILD_DEPENDS}
.endif
.endfor
# Standard options
MOZ_CHROME?= omni
MOZ_TOOLKIT?= cairo-gtk3
MOZ_CHANNEL?= ${PKGNAMESUFFIX:Urelease:S/^-//}
MOZ_OPTIONS+= \
--enable-chrome-format=${MOZ_CHROME} \
--enable-default-toolkit=${MOZ_TOOLKIT} \
--enable-update-channel=${MOZ_CHANNEL} \
--disable-updater
# others
MOZ_OPTIONS+= --with-system-zlib \
--with-system-bz2
# API keys from www/chromium
# http://www.chromium.org/developers/how-tos/api-keys
# Note: these are for FreeBSD use ONLY. For your own distribution,
# please get your own set of keys.
MOZ_EXPORT+= MOZ_GOOGLE_API_KEY=AIzaSyBsp9n41JLW8jCokwn7vhoaMejDFRd1mp8
.if ${PORT_OPTIONS:MGTK2}
MOZ_TOOLKIT= cairo-gtk2
.elif ${PORT_OPTIONS:MWAYLAND}
MOZ_TOOLKIT= cairo-gtk3-wayland
.endif
USES+= gnome
.if ${MOZ_TOOLKIT:Mcairo-gtk3*}
BUILD_DEPENDS+= gtk3>=3.14.6:x11-toolkits/gtk30
USE_GNOME+= gdkpixbuf2 gtk20 gtk30
.else # gtk2, cairo-gtk2
USE_GNOME+= gdkpixbuf2 gtk20
.endif
.if ${PORT_OPTIONS:MOPTIMIZED_CFLAGS}
CFLAGS+= -O3
MOZ_EXPORT+= MOZ_OPTIMIZE_FLAGS="${CFLAGS:M-O*}"
MOZ_OPTIONS+= --enable-optimize
.else
MOZ_OPTIONS+= --disable-optimize
. if ${MOZILLA_VER:R:R} >= 56
. if ${/usr/bin/ld:L:tA} != /usr/bin/ld.lld
# ld 2.17 barfs on Stylo built with -C opt-level=0
USE_BINUTILS= yes
LDFLAGS+= -B${LOCALBASE}/bin
. endif
. endif
.endif
.if ${PORT_OPTIONS:MCANBERRA}
RUN_DEPENDS+= libcanberra>0:audio/libcanberra
.endif
.if ${PORT_OPTIONS:MDBUS}
BUILD_DEPENDS+= libnotify>0:devel/libnotify
LIB_DEPENDS+= libdbus-1.so:devel/dbus \
libdbus-glib-1.so:devel/dbus-glib \
libstartup-notification-1.so:x11/startup-notification
MOZ_OPTIONS+= --enable-startup-notification
.else
MOZ_OPTIONS+= --disable-dbus
.endif
.if ${PORT_OPTIONS:MFFMPEG}
# dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp
RUN_DEPENDS+= ffmpeg>=0.8,1:multimedia/ffmpeg
.endif
.if ${PORT_OPTIONS:MGCONF}
USE_GNOME+= gconf2
MOZ_OPTIONS+= --enable-gconf
.else
MOZ_OPTIONS+= --disable-gconf
.endif
.if ${PORT_OPTIONS:MLIBPROXY}
LIB_DEPENDS+= libproxy.so:net/libproxy
MOZ_OPTIONS+= --enable-libproxy
.else
MOZ_OPTIONS+= --disable-libproxy
.endif
.if ${PORT_OPTIONS:MALSA}
LIB_DEPENDS+= libasound.so:audio/alsa-lib
RUN_DEPENDS+= ${LOCALBASE}/lib/alsa-lib/libasound_module_pcm_oss.so:audio/alsa-plugins
RUN_DEPENDS+= alsa-lib>=1.1.1_1:audio/alsa-lib
MOZ_OPTIONS+= --enable-alsa
.endif
.if ${PORT_OPTIONS:MJACK}
BUILD_DEPENDS+= ${LOCALBASE}/include/jack/jack.h:audio/jack
MOZ_OPTIONS+= --enable-jack
.endif
.if ${PORT_OPTIONS:MPULSEAUDIO}
BUILD_DEPENDS+= ${LOCALBASE}/include/pulse/pulseaudio.h:audio/pulseaudio
MOZ_OPTIONS+= --enable-pulseaudio
.else
MOZ_OPTIONS+= --disable-pulseaudio
.endif
.if ${PORT_OPTIONS:MSNDIO}
LIB_DEPENDS+= libsndio.so:audio/sndio
post-patch-SNDIO-on:
@${REINPLACE_CMD} -e 's|OpenBSD|${OPSYS}|g' \
${MOZSRC}/media/libcubeb/src/moz.build \
${MOZSRC}/toolkit/library/moz.build
. for tests in tests gtest
@if [ -f "${MOZSRC}/media/libcubeb/${tests}/moz.build" ]; then \
${REINPLACE_CMD} -e 's|OpenBSD|${OPSYS}|g' \
${MOZSRC}/media/libcubeb/${tests}/moz.build; \
fi
. endfor
@if [ -f "${MOZSRC}/media/webrtc/trunk/webrtc/build/common.gypi" ]; then \
${REINPLACE_CMD} -e 's|OS==\"openbsd\"|OS==\"${OPSYS:tl}\"|g' \
${MOZSRC}/media/webrtc/trunk/webrtc/build/common.gypi; \
fi
@if [ -f "${MOZSRC}/media/webrtc/signaling/test/common.build" ]; then \
${ECHO_CMD} "OS_LIBS += ['sndio']" >> \
${MOZSRC}/media/webrtc/signaling/test/common.build; \
fi
.endif
.if ${PORT_OPTIONS:MRUST} || ${MOZILLA_VER:R:R} >= 54
BUILD_DEPENDS+= ${RUST_DEFAULT}>=1.30:lang/${RUST_DEFAULT}
. if ${MOZILLA_VER:R:R} < 54
MOZ_OPTIONS+= --enable-rust
. endif
.else
MOZ_OPTIONS+= --disable-rust
.endif
.if ${PORT_OPTIONS:MDEBUG}
MOZ_OPTIONS+= --enable-debug --disable-release
STRIP= # ports/184285
.else
MOZ_OPTIONS+= --disable-debug --disable-debug-symbols --enable-release
. if ${MOZILLA_VER:R:R} >= 67 && (${ARCH:Maarch64} || ${MACHINE_CPU:Msse2})
MOZ_OPTIONS+= --enable-rust-simd
. endif
.endif
.if ${PORT_OPTIONS:MPROFILE}
MOZ_OPTIONS+= --enable-profiling
STRIP=
.else
MOZ_OPTIONS+= --disable-profiling
.endif
.if ${PORT_OPTIONS:MTEST}
USE_XORG+= xscrnsaver
MOZ_OPTIONS+= --enable-tests
.else
MOZ_OPTIONS+= --disable-tests
.endif
.if !defined(STRIP) || ${STRIP} == ""
MOZ_OPTIONS+= --disable-strip --disable-install-strip
.else
MOZ_OPTIONS+= --enable-strip --enable-install-strip
.endif
# _MAKE_JOBS is only available after bsd.port.post.mk, thus cannot be
# used in .mozconfig. And client.mk automatically uses -jN where N
# is what multiprocessing.cpu_count() returns.
.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
MAKE_JOBS_NUMBER= 1
.endif
.if defined(MAKE_JOBS_NUMBER)
MOZ_MAKE_FLAGS+=-j${MAKE_JOBS_NUMBER}
.endif
.if defined(MOZ_MAKE_FLAGS)
MOZ_MK_OPTIONS+=MOZ_MAKE_FLAGS="${MOZ_MAKE_FLAGS}"
.endif
MOZ_SED_ARGS+= -e's|@CPPFLAGS@|${CPPFLAGS}|g' \
-e 's|@CFLAGS@|${CFLAGS}|g' \
-e 's|@LDFLAGS@|${LDFLAGS}|g' \
-e 's|@LIBS@|${LIBS}|g' \
-e 's|@LOCALBASE@|${LOCALBASE}|g' \
-e 's|@PERL@|${PERL}|g' \
-e 's|@MOZDIR@|${PREFIX}/lib/${MOZILLA}|g' \
-e 's|%%PREFIX%%|${PREFIX}|g' \
-e 's|%%CFLAGS%%|${CFLAGS}|g' \
-e 's|%%LDFLAGS%%|${LDFLAGS}|g' \
-e 's|%%LIBS%%|${LIBS}|g' \
-e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
-e 's|%%PERL%%|${PERL}|g' \
-e 's|%%MOZILLA%%|${MOZILLA}|g' \
-e 's|%%MOZILLA_BIN%%|${MOZILLA_BIN}|g' \
-e 's|%%MOZDIR%%|${PREFIX}/lib/${MOZILLA}|g'
MOZCONFIG_SED?= ${SED} ${MOZ_SED_ARGS}
.if ${ARCH} == amd64
. if ${USE_MOZILLA:M-nss}
USE_BINUTILS= # intel-gcm.s
CFLAGS+= -B${LOCALBASE}/bin
LDFLAGS+= -B${LOCALBASE}/bin
. endif
.elif ${ARCH:Mpowerpc*}
. if ${ARCH} == "powerpc64"
MOZ_EXPORT+= UNAME_m="${ARCH}"
CFLAGS+= -mminimal-toc
. endif
.elif ${ARCH} == "sparc64"
# Work around miscompilation/mislinkage of the sCanonicalVTable hacks.
MOZ_OPTIONS+= --disable-v1-string-abi
.endif
.else # bsd.port.post.mk
post-patch: gecko-post-patch gecko-moz-pis-patch
gecko-post-patch:
.if exists(${PKGINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGINSTALL_INC} > ${PKGINSTALL}
.endif
.if exists(${PKGDEINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGDEINSTALL_INC} > ${PKGDEINSTALL}
.endif
@${RM} ${MOZCONFIG}
.if !defined(NOMOZCONFIG)
@if [ -e ${PORT_MOZCONFIG} ] ; then \
${MOZCONFIG_SED} < ${PORT_MOZCONFIG} >> ${MOZCONFIG} ; \
fi
.for arg in ${MOZ_OPTIONS}
@${ECHO_CMD} ac_add_options ${arg:Q} >> ${MOZCONFIG}
.endfor
.for arg in ${MOZ_MK_OPTIONS}
@${ECHO_CMD} mk_add_options ${arg:Q} >> ${MOZCONFIG}
.endfor
.for var in ${MOZ_EXPORT}
@${ECHO_CMD} export ${var:Q} >> ${MOZCONFIG}
.endfor
.endif # .if !defined(NOMOZCONFIG)
.if exists(${MOZSRC}/build/unix/mozilla-config.in)
@${REINPLACE_CMD} -e 's/%{idldir}/%idldir%/g ; \
s|"%FULL_NSPR_CFLAGS%"|`nspr-config --cflags`|g ; \
s|"%FULL_NSPR_LIBS%"|`nspr-config --libs`|g' \
${MOZSRC}/build/unix/mozilla-config.in
.endif
.if ${USE_MOZILLA:M-nspr}
@${ECHO_MSG} "===> Applying NSPR patches"
@for i in ${.CURDIR}/../../devel/nspr/files/patch-*; do \
${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/nsprpub < $$i; \
done
.endif
.if ${USE_MOZILLA:M-nss}
@${ECHO_MSG} "===> Applying NSS patches"
@for i in ${.CURDIR}/../../security/nss/files/patch-*; do \
${PATCH} ${PATCH_ARGS} -d ${MOZSRC}/security/nss < $$i; \
done
.endif
@if [ -f ${WRKSRC}/config/baseconfig.mk ] ; then \
${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
${WRKSRC}/config/baseconfig.mk; \
fi
@${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
${MOZSRC}/config/baseconfig.mk
@${REINPLACE_CMD} -e 's|/usr/local/netscape|${LOCALBASE}|g ; \
s|/usr/local/lib/netscape|${LOCALBASE}/lib|g' \
${MOZSRC}/xpcom/io/SpecialSystemDirectory.cpp
@${REINPLACE_CMD} -e 's|/etc|${PREFIX}&|g' \
${MOZSRC}/xpcom/build/nsXPCOMPrivate.h
@${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
-e 's|mozilla/plugins|browser_plugins|g' \
-e 's|share/mozilla/extensions|lib/xpi|g' \
${MOZSRC}/xpcom/io/nsAppFileLocationProvider.cpp \
${MOZSRC}/toolkit/xre/nsXREDirProvider.cpp
.if ${MOZILLA_VER:R:R} < 61
@${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${MOZSRC}/extensions/spellcheck/hunspell/*/mozHunspell.cpp
.endif
# handles mozilla pis scripts.
gecko-moz-pis-patch:
.for moz in ${MOZ_PIS_SCRIPTS}
@${MOZCONFIG_SED} < ${FILESDIR}/${moz} > ${WRKDIR}/${moz}
.endfor
pre-configure: gecko-pre-configure
gecko-pre-configure:
.if ${PORT_OPTIONS:MWAYLAND}
# .if !exists() evaluates too early before gtk3 has a chance to be installed
@if ! pkg-config --exists gtk+-wayland-3.0; then \
${ECHO_MSG} "${PKGNAME}: Needs gtk3 with WAYLAND support enabled."; \
${FALSE}; \
fi
.endif
pre-install: gecko-moz-pis-pre-install
post-install-script: gecko-create-plist
gecko-create-plist:
# Create the plist
${RM} ${PLISTF}
.for dir in ${MOZILLA_PLIST_DIRS}
@cd ${STAGEDIR}${PREFIX}/${dir} && ${FIND} -H -s * ! -type d | \
${SED} -e 's|^|${dir}/|' >> ${PLISTF}
.endfor
${CAT} ${PLISTF} | ${SORT} >> ${TMPPLIST}
gecko-moz-pis-pre-install:
.if defined(MOZ_PIS_SCRIPTS)
${MKDIR} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR}
.for moz in ${MOZ_PIS_SCRIPTS}
${INSTALL_SCRIPT} ${WRKDIR}/${moz} ${STAGEDIR}${PREFIX}/${MOZ_PIS_DIR}
.endfor
.endif
.endif
.endif
# HERE THERE BE TACOS -- adamw