mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-17 03:25:46 +00:00
Code Issues Releases Activity
e8796ef612
freebsd-ports/Mk/bsd.options.mk
Mathieu Arnold e8796ef612 Rewrite the target ordering code. 
The targets now have priority assigned to them, and, when the dependency
ordering magic is done at the end of bsd.port.mk, they are sorted
according to their priority.

This allows USES to add targets easily and have them run whenever they
want without touching bsd.port.mk.

To add a target that runs just before post-configure run, do:

_USES_configure+=  695:my-post-configure
my-post-configure:
	do something

To fine tune when the target is ran, look at the values in the *_SEQ
variables at the end of bsd.port.mk, and the other USES.

Allow ports Makefiles to override the priority of targets with the
TARGET_ORDER_OVERRIDE variable.  For example, to get post-install
running earlier, (its default is 700) do:

TARGET_ORDER_OVERRIDE=	  650:post-install

While there, add options target helpers for the do-* targets when they
exist.

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3099
2015-08-17 13:31:25 +00:00

530 lines
17 KiB
Makefile
Raw Blame History

# $FreeBSD$
#
# These variables are used in port makefiles to define the options for a port.
#
# OPTIONS_DEFINE - List of options this ports accept
# OPTIONS_DEFINE_${ARCH} - List of options this ports accept and are
# specific to ${ARCH}
# OPTIONS_DEFAULT - List of options activated by default
# OPTIONS_DEFAULT_${ARCH} - List of options activated by default for a
# given arch
#
# ${OPTION}_DESC - Description of the ${OPTION}
#
# OPTIONS_SINGLE - List of single-choice grouped options: 1 and
# only 1 among N
# OPTIONS_RADIO - List of radio-choice grouped options: 0 or 1
# among N
# OPTIONS_MULTI - List of multiple-choice grouped options: at
# least 1 among N
# OPTIONS_GROUP - List of group-choice grouped options: 0 or
# more among N
#
# OPTIONS_SINGLE_${NAME} - List of OPTIONS grouped as single choice (for
# the single named as ${NAME} as defined in
# OPTIONS_SINGLE)
# OPTIONS_RADIO_${NAME} - List of OPTIONS grouped as radio choice (for
# the radio named as ${NAME} as defined in
# OPTIONS_RADIO)
# OPTIONS_MULTI_${NAME} - List of OPTIONS grouped as multiple-choice
# (for the multi named as ${NAME} as defined in
# OPTIONS_MULTI)
# OPTIONS_GROUP_${NAME} - List of OPTIONS grouped as group-choice (for
# the group named as ${NAME} as defined in
# OPTIONS_GROUP)
#
# OPTIONS_EXCLUDE - List of options unsupported (useful for slave ports)
# OPTIONS_EXCLUDE_${ARCH} - List of options unsupported on a given ${ARCH}
# OPTIONS_EXCLUDE_${OPSYS} - List of options unsupported on a given ${OPSYS}
# OPTIONS_SLAVE - This is designed for slave ports, it removes an
# option from the options list inherited from the
# master port and it always adds it to PORT_OPTIONS
# meaning activated
#
# These variables can be used in make.conf to configure options. They are
# processed in the order listed below, i.e. later variables override the effects
# of previous variables. Options saved using the options dialog are processed
# right before OPTIONS_SET_FORCE. When building a port a dialog to configure
# options will only appear if there are new options, i.e. options which have not
# been configured before either using the option dialog in a previous build or
# using the variables below. You can force the dialog to appear by running
# "make config".
#
# OPTIONS_SET - List of options to enable for all ports.
# OPTIONS_UNSET - List of options to disable for all ports.
# ${OPTIONS_NAME}_SET - List of options to enable for a specific port.
# ${OPTIONS_NAME}_UNSET - List of options to disable for a specific port.
#
# OPTIONS_SET_FORCE - List of options to enable for all ports.
# OPTIONS_UNSET_FORCE - List of options to disable for all ports.
# ${OPTIONS_NAME}_SET_FORCE - List of options to enable for a specific port.
# ${OPTIONS_NAME}_UNSET_FORCE
# - List of options to disable for a specific port.
#
# These variables can be used on the command line. They override the effects of
# the make.conf variables above.
#
# WITH - Set options from the command line
# WITHOUT - Unset options from the command line
#
#
# The following knobs are there to simplify the handling of OPTIONS in simple
# cases :
#
# OPTIONS_SUB When defined it will add to PLIST_SUB:
# Option enabled ${opt}=""
# Option disabled ${opt}="@comment "
#
# ${opt}_CONFIGURE_ON When option is enabled, it will add its content to
# the CONFIGURE_ARGS.
# ${opt}_CONFIGURE_OFF When option is disabled, it will add its content to
# the CONFIGURE_ARGS.
# ${opt}_CONFIGURE_ENABLE Will add to CONFIGURE_ARGS:
# Option enabled --enable-${content}
# Option disabled --disable-${content}
# ${opt}_CONFIGURE_WITH Will add to CONFIGURE_ARGS:
# Option enabled --with-${content}
# Option disabled --without-${content}
#
# ${opt}_CMAKE_ON When option is enabled, it will add its content to
# the CMAKE_ARGS.
# ${opt}_CMAKE_OFF When option is disabled, it will add its content to
# the CMAKE_ARGS.
#
# ${opt}_QMAKE_ON When option is enabled, it will add its content to
# the QMAKE_ARGS.
# ${opt}_QMAKE_OFF When option is disabled, it will add its content to
# the QMAKE_ARGS.
#
# ${opt}_USE= FOO=bar When option is enabled, it will enable
# USE_FOO+= bar
# If you need more than one option, you can do
# FOO=bar,baz and you'll get USE_FOO=bar baz
# ${opt}_USE_OFF= FOO=bar When option is disabled, it will enable
# USE_FOO+= bar
#
# For each of:
# ALL_TARGET CATEGORIES CFLAGS CONFIGURE_ENV CONFLICTS CONFLICTS_BUILD
# CONFLICTS_INSTALL CPPFLAGS CXXFLAGS DISTFILES EXTRA_PATCHES GH_ACCOUNT
# GH_PROJECT GH_TAGNAME INFO INSTALL_TARGET LDFLAGS LIBS MAKE_ARGS MAKE_ENV
# PATCHFILES PATCH_SITES PLIST_DIRS PLIST_DIRSTRY PLIST_FILES PLIST_SUB
# PORTDOCS SUB_FILES SUB_LIST USES,
# defining ${opt}_${variable} will add its content to the actual variable when
# the option is enabled. Defining ${opt}_${variable}_OFF will add its content
# to the actual variable when the option is disabled.
#
# For each of the depends target PKG FETCH EXTRACT PATCH BUILD LIB RUN,
# defining ${opt}_${deptype}_DEPENDS will add its content to the actual
# dependency when the option is enabled. Defining
# ${opt}_${deptype}_DEPENDS_OFF will add its content to the actual dependency
# when the option is disabled.
##
# Set all the options available for the ports, beginning with the
# global ones and ending with the ones decided by the maintainer.
.if !defined(OPTIONSMKINCLUDED)
OPTIONSMKINCLUDED= bsd.options.mk
OPTIONS_NAME?= ${PKGORIGIN:S/\//_/}
OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options
OPTIONS_FILE?= ${PORT_DBDIR}/${OPTIONS_NAME}/options
_OPTIONS_FLAGS= ALL_TARGET CATEGORIES CFLAGS CONFIGURE_ENV CONFLICTS \
CONFLICTS_BUILD CONFLICTS_INSTALL CPPFLAGS CXXFLAGS DISTFILES \
EXTRA_PATCHES GH_ACCOUNT GH_PROJECT GH_TAGNAME INFO \
INSTALL_TARGET LDFLAGS LIBS MAKE_ARGS MAKE_ENV PATCHFILES \
PATCH_SITES PLIST_DIRS PLIST_DIRSTRY PLIST_FILES PLIST_SUB \
PORTDOCS SUB_FILES SUB_LIST USES
_OPTIONS_DEPENDS= PKG FETCH EXTRACT PATCH BUILD LIB RUN
# The format here is target_family:priority:target-type
_OPTIONS_TARGETS= fetch:300:pre fetch:500:do fetch:700:post \
extract:300:pre extract:500:do extract:700:post \
patch:300:pre patch:500:do patch:700:post \
configure:300:pre configure:500:do configure:700:post \
build:300:pre build:500:do build:700:post \
install:300:pre install:500:do install:700:post \
package:300:pre package:500:do package:700:post \
stage:800:post
# Set the default values for the global options, as defined by portmgr
.if !defined(NOPORTDOCS)
PORT_OPTIONS+= DOCS
.else
OPTIONS_WARNINGS+= "NOPORTDOCS"
WITHOUT+= DOCS
OPTIONS_WARNINGS_UNSET+= DOCS
.endif
.if !defined(WITHOUT_NLS)
PORT_OPTIONS+= NLS
.else
WITHOUT+= NLS
.endif
.if !defined(NOPORTEXAMPLES)
PORT_OPTIONS+= EXAMPLES
.else
OPTIONS_WARNINGS+= "NOPORTEXAMPLES"
WITHOUT+= EXAMPLES
OPTIONS_WARNINGS_UNSET+= EXAMPLES
.endif
PORT_OPTIONS+= IPV6
# Add per arch options
.for opt in ${OPTIONS_DEFINE_${ARCH}}
.if empty(OPTIONS_DEFINE:M${opt})
OPTIONS_DEFINE+= ${opt}
.endif
.endfor
# Add per arch defaults
OPTIONS_DEFAULT+= ${OPTIONS_DEFAULT_${ARCH}}
# Remove options the port maintainer doesn't want
.for opt in ${OPTIONS_EXCLUDE_${ARCH}} ${OPTIONS_EXCLUDE} ${OPTIONS_SLAVE} \
${OPTIONS_EXCLUDE_${OPSYS}}
OPTIONS_DEFAULT:= ${OPTIONS_DEFAULT:N${opt}}
OPTIONS_DEFINE:= ${OPTIONS_DEFINE:N${opt}}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
. for otype in SINGLE RADIO MULTI GROUP
. for m in ${OPTIONS_${otype}}
OPTIONS_${otype}_${m}:= ${OPTIONS_${otype}_${m}:N${opt}}
. endfor
. endfor
.endfor
# Remove empty SINGLE/GROUP/RADIO/MULTI
# Can be empty because of exclude/slaves
.for otype in SINGLE RADIO MULTI GROUP
. for m in ${OPTIONS_${otype}}
. if empty(OPTIONS_${otype}_${m})
OPTIONS_${otype}:= ${OPTIONS_${otype}:N${m}}
. endif
. endfor
.endfor
# Sort options
ALL_OPTIONS:= ${OPTIONS_DEFINE:O:u}
OPTIONS_DEFAULT:= ${OPTIONS_DEFAULT:O:u}
# complete list
COMPLETE_OPTIONS_LIST= ${ALL_OPTIONS}
.for otype in SINGLE RADIO MULTI GROUP
. for m in ${OPTIONS_${otype}}
COMPLETE_OPTIONS_LIST+= ${OPTIONS_${otype}_${m}}
. endfor
.endfor
## Now create the list of activated options
.if defined(OPTIONS_OVERRIDE)
# Special case $OPTIONS_OVERRIDE; if it is defined forget about anything done
# before
NEW_OPTIONS=
PORT_OPTIONS:= ${OPTIONS_OVERRIDE}
.else
NEW_OPTIONS= ${COMPLETE_OPTIONS_LIST}
## Set default options defined by the port maintainer
PORT_OPTIONS+= ${OPTIONS_DEFAULT}
## Set system-wide defined options (set by user in make.conf)
. for opt in ${OPTIONS_SET}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Remove the options excluded system-wide (set by user in make.conf)
. for opt in ${OPTIONS_UNSET}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
# XXX To remove once UNIQUENAME will be removed
## Set the options specified per-port (set by user in make.conf)
. for opt in ${${UNIQUENAME}_SET}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Unset the options excluded per-port (set by user in make.conf)
. for opt in ${${UNIQUENAME}_UNSET}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
# XXX To remove once UNIQUENAME will be removed
## Set the options specified per-port (set by user in make.conf)
. for opt in ${${OPTIONS_NAME}_SET}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Unset the options excluded per-port (set by user in make.conf)
. for opt in ${${OPTIONS_NAME}_UNSET}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
# XXX to remove once UNIQUENAME is removed
## options files (from dialog)
. if exists(${OPTIONSFILE}) && !make(rmconfig)
. include "${OPTIONSFILE}"
. endif
. sinclude "${OPTIONSFILE}.local"
# XXX to remove once UNIQUENAME is removed
## options files (from dialog)
. if exists(${OPTIONS_FILE}) && !make(rmconfig)
. include "${OPTIONS_FILE}"
. endif
. sinclude "${OPTIONS_FILE}.local"
### convert WITH and WITHOUT found in make.conf or reloaded from old optionsfile
# XXX once WITH_DEBUG is not magic any more, do remove the :NDEBUG from here.
.for opt in ${ALL_OPTIONS:NDEBUG}
.if defined(WITH_${opt})
OPTIONS_WARNINGS+= "WITH_${opt}"
OPTIONS_WARNINGS_SET+= ${opt}
PORT_OPTIONS+= ${opt}
.endif
.if defined(WITHOUT_${opt})
OPTIONS_WARNINGS+= "WITHOUT_${opt}"
OPTIONS_WARNINGS_UNSET+= ${opt}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
.endif
.endfor
.if defined(OPTIONS_WARNINGS)
WARNING+= "You are using the following deprecated options: ${OPTIONS_WARNINGS}"
WARNING+= "If you added them on the command line, you should replace them by"
WARNING+= "WITH=\"${OPTIONS_WARNINGS_SET}\" WITHOUT=\"${OPTIONS_WARNINGS_UNSET}\""
WARNING+= ""
WARNING+= "If they are global options set in your make.conf, you should replace them with:"
.if defined(OPTIONS_WARNINGS_SET)
WARNING+= "OPTIONS_SET=${OPTIONS_WARNINGS_SET}"
.endif
.if defined(OPTIONS_WARNINGS_UNSET)
WARNING+= "OPTIONS_UNSET=${OPTIONS_WARNINGS_UNSET}"
.endif
WARNING+= ""
WARNING+= "If they are local to this port, you should use:"
.if defined(OPTIONS_WARNINGS_SET)
WARNING+= "${OPTIONS_NAME}_SET=${OPTIONS_WARNINGS_SET}"
.endif
.if defined(OPTIONS_WARNINGS_UNSET)
WARNING+= "${OPTIONS_NAME}_UNSET=${OPTIONS_WARNINGS_UNSET}"
.endif
.endif
## Finish by using the options set by the port config dialog, if any
. for opt in ${OPTIONS_FILE_SET}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
.for opt in ${OPTIONS_FILE_UNSET}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
.endfor
.endif
## FORCE
## Set system-wide defined options (set by user in make.conf)
. for opt in ${OPTIONS_SET_FORCE}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Remove the options excluded system-wide (set by user in make.conf)
. for opt in ${OPTIONS_UNSET_FORCE}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
# XXX To remove once UNIQUENAME will be removed
## Set the options specified per-port (set by user in make.conf)
. for opt in ${${UNIQUENAME}_SET_FORCE}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Unset the options excluded per-port (set by user in make.conf)
. for opt in ${${UNIQUENAME}_UNSET_FORCE}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
# XXX To remove once UNIQUENAME will be removed
## Set the options specified per-port (set by user in make.conf)
. for opt in ${${OPTIONS_NAME}_SET_FORCE}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
. endfor
## Unset the options excluded per-port (set by user in make.conf)
. for opt in ${${OPTIONS_NAME}_UNSET_FORCE}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endfor
## Cmdline always win over the rest
.for opt in ${WITH}
. if !empty(COMPLETE_OPTIONS_LIST:M${opt})
PORT_OPTIONS+= ${opt}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
. endif
.endfor
.for opt in ${WITHOUT}
PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}}
NEW_OPTIONS:= ${NEW_OPTIONS:N${opt}}
.endfor
# Finally, add options required by slave ports
PORT_OPTIONS+= ${OPTIONS_SLAVE}
# Sort options and eliminate duplicates
PORT_OPTIONS:= ${PORT_OPTIONS:O:u}
## Now some compatibility
.if empty(PORT_OPTIONS:MDOCS)
NOPORTDOCS= yes
.endif
.if empty(PORT_OPTIONS:MEXAMPLES)
NOPORTEXAMPLES= yes
.endif
.if ${PORT_OPTIONS:MDEBUG}
WITH_DEBUG= yes
.endif
.if defined(NO_OPTIONS_SORT)
ALL_OPTIONS= ${OPTIONS_DEFINE}
.endif
.for target in ${_OPTIONS_TARGETS:C/:.*//:u}
_OPTIONS_${target}?=
.endfor
.for opt in ${COMPLETE_OPTIONS_LIST} ${OPTIONS_SLAVE} ${OPTIONS_EXCLUDE_${ARCH}} ${OPTIONS_EXCLUDE}
# PLIST_SUB
PLIST_SUB?=
SUB_LIST?=
. if defined(OPTIONS_SUB)
. if ! ${PLIST_SUB:M${opt}=*}
. if ${PORT_OPTIONS:M${opt}}
PLIST_SUB:= ${PLIST_SUB} ${opt}="" NO_${opt}="@comment "
. else
PLIST_SUB:= ${PLIST_SUB} ${opt}="@comment " NO_${opt}=""
. endif
. endif
. if ! ${SUB_LIST:M${opt}=*}
. if ${PORT_OPTIONS:M${opt}}
SUB_LIST:= ${SUB_LIST} ${opt}="" NO_${opt}="@comment "
. else
SUB_LIST:= ${SUB_LIST} ${opt}="@comment " NO_${opt}=""
. endif
. endif
. endif
. if ${PORT_OPTIONS:M${opt}}
. if defined(${opt}_USE)
. for option in ${${opt}_USE}
_u= ${option:C/=.*//g}
USE_${_u:tu}+= ${option:C/.*=//g:C/,/ /g}
. endfor
. endif
. if defined(${opt}_CONFIGURE_ENABLE)
. for iopt in ${${opt}_CONFIGURE_ENABLE}
CONFIGURE_ARGS+= --enable-${iopt}
. endfor
. endif
. if defined(${opt}_CONFIGURE_WITH)
. for iopt in ${${opt}_CONFIGURE_WITH}
CONFIGURE_ARGS+= --with-${iopt}
. endfor
. endif
. for configure in CONFIGURE CMAKE QMAKE
. if defined(${opt}_${configure}_ON)
${configure}_ARGS+= ${${opt}_${configure}_ON}
. endif
. endfor
. for flags in ${_OPTIONS_FLAGS}
. if defined(${opt}_${flags})
${flags}+= ${${opt}_${flags}}
. endif
. endfor
. for deptype in ${_OPTIONS_DEPENDS}
. if defined(${opt}_${deptype}_DEPENDS)
${deptype}_DEPENDS+= ${${opt}_${deptype}_DEPENDS}
. endif
. endfor
. for target in ${_OPTIONS_TARGETS}
_target= ${target:C/:.*//}
_prio= ${target:C/.*:(.*):.*/\1/}
_type= ${target:C/.*://}
_OPTIONS_${_target}:= ${_OPTIONS_${_target}} ${_prio}:${_type}-${_target}-${opt}-on
. endfor
. else
. if defined(${opt}_USE_OFF)
. for option in ${${opt}_USE_OFF}
_u= ${option:C/=.*//g}
USE_${_u:tu}+= ${option:C/.*=//g:C/,/ /g}
. endfor
. endif
. if defined(${opt}_CONFIGURE_ENABLE)
. for iopt in ${${opt}_CONFIGURE_ENABLE}
CONFIGURE_ARGS+= --disable-${iopt:C/=.*//}
. endfor
. endif
. if defined(${opt}_CONFIGURE_WITH)
. for iopt in ${${opt}_CONFIGURE_WITH}
CONFIGURE_ARGS+= --without-${iopt:C/=.*//}
. endfor
. endif
. for configure in CONFIGURE CMAKE QMAKE
. if defined(${opt}_${configure}_OFF)
${configure}_ARGS+= ${${opt}_${configure}_OFF}
. endif
. endfor
. for flags in ${_OPTIONS_FLAGS}
. if defined(${opt}_${flags}_OFF)
${flags}+= ${${opt}_${flags}_OFF}
. endif
. endfor
. for deptype in ${_OPTIONS_DEPENDS}
. if defined(${opt}_${deptype}_DEPENDS_OFF)
${deptype}_DEPENDS+= ${${opt}_${deptype}_DEPENDS_OFF}
. endif
. endfor
. for target in ${_OPTIONS_TARGETS}
_target= ${target:C/:.*//}
_prio= ${target:C/.*:(.*):.*/\1/}
_type= ${target:C/.*://}
_OPTIONS_${_target}:= ${_OPTIONS_${_target}} ${_prio}:${_type}-${_target}-${opt}-off
. endfor
. endif
.endfor
.endif
Reference in New Issue View Git Blame Copy Permalink