mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-25 00:51:21 +00:00
Code Issues Releases Activity
f0f72ef4e1
freebsd-ports/Mk/bsd.ruby.mk
Akinori MUSHA 0d3df60c24 Update lang/ruby to 1.6.8-preview3, lang/ruby16-shim-ruby18 to 
1.7.3.2002.12.11, and lang/ruby-devel to 1.7.3-2002.12.12.

- Fix a few bugs that lead to core dump, one in the ruby interpreter
  and another in the syslog module.

  Reported by:	ume (net/dtcp was a victim)

- Fix an installation problem occasionally seen on bento. (a bug in
  Makefile that caused race)

  Submitted by:	bento

- Fix a problem that irb(1) didn't work because the symlink was wrong.

  Submitted by:	Jos Backus <jos@catnook.com>

- Get rid of move & symlink spaghetti completely from the installation
  process.

Discussed with:	portmgr (will)
2002-12-12 12:53:03 +00:00

446 lines
15 KiB
Makefile
Raw Blame History

#
# bsd.ruby.mk - Utility definitions for Ruby related ports.
#
# Created by: Akinori MUSHA <knu@FreeBSD.org>
#
# $FreeBSD$
#
.if !defined(Ruby_Include)
Ruby_Include= bsd.ruby.mk
Ruby_Include_MAINTAINER= knu@FreeBSD.org
#
# [variables that a user may define]
#
# RUBY_VER - (See below)
# RUBY_DEFAULT_VER - Set to (e.g.) "1.7" if you want to refer to "ruby17" just as "ruby".
# RUBY_ARCH - (See below)
# RUBY_NO_RD_HTML - Define if you don't want HTML files generated from RD files.
#
# [variables that each port can define]
#
# RUBY - Set to full path of ruby. If you set this, the values of the following variables are automatically obtained from the ruby executable: RUBY_VER, RUBY_VERSION, RUBY_NAME, RUBY_ARCH, RUBY_LIBDIR, RUBY_ARCHLIBDIR, RUBY_SITELIBDIR, and RUBY_SITEARCHLIBDIR.
# RUBY_VER - Set to the alternative short version of ruby in the form of `x.y' (see below for current value).
# USE_RUBY - Says that the port uses ruby for building and running.
# RUBY_NO_BUILD_DEPENDS - Says that the port should not build-depend on ruby.
# RUBY_NO_RUN_DEPENDS - Says that the port should not run-depend on ruby.
# USE_LIBRUBY - Says that the port uses libruby.
# RUBY_WITH_PTHREAD - Says that the port needs to be compiled with pthread.
# USE_RUBY_EXTCONF - Says that the port uses extconf.rb to configure. Implies USE_RUBY.
# RUBY_EXTCONF - Set to the alternative name of extconf.rb (default: extconf.rb).
# RUBY_EXTCONF_SUBDIRS - Set to list of subdirectories, if multiple modules are included.
# USE_RUBY_SETUP - Says that the port uses setup.rb to configure and build.
# RUBY_SETUP - Set to the alternative name of setup.rb (default: setup.rb).
# USE_RUBY_AMSTD - Says that the port uses amstd for building and running.
# USE_RUBY_RDTOOL - Says that the port uses rdtool to generate documents.
# USE_RUBY_RDOC - Says that the port uses rdoc to generate documents.
# USE_RUBY_FEATURES - Says that the port requires some of the following features
# for building and/or running (default: none):
# benchmark dl fileutil optparse pp racc-runtime
# ruby18 set stringio strscan tsort
# RUBY_REQUIRE - Set to a Ruby expression to evaluate before building the port. The constant "Ruby" is set to the integer version number of ruby, and the result of the expression will be set to RUBY_PROVIDED, which is left undefined if the result is nil, false or a zero-length string. Implies USE_RUBY.
# RUBY_SHEBANG_FILES - Specify the files which shebang lines you want to fix.
# RUBY_RD_FILES - Specify the RD files which you want to generate HTML documents from.
# If this is defined and not empty, USE_RUBY_RDTOOL is implied and
# RUBY_RD_HTML_FILES is defined.
#
# [variables that each port should not (re)define]
#
# RUBY_PKGNAMEPREFIX - Common PKGNAMEPREFIX for ruby ports (default: ruby${RUBY_SUFFIX}-)
# RUBY_VERSION - Full version of ruby without preview/beta suffix in the form of `x.y.z' (see below for current value).
# RUBY_VERSION_CODE - Full integer version of ruby without preview/beta suffix in the form of `xyz'.
# RUBY_PORTVERSION - PORTVERSION for the standard ruby ports (ruby, ruby-gdbm, etc.).
# RUBY_DISTNAME - DISTNAME for the standard ruby ports, i.e. the basename of the ruby distribution tarball.
# RUBY_DISTVERSION - The version number part of RUBY_DISTNAME.
# RUBY_PATCHFILES - PATCHFILES for the standard ruby ports, i.e. the basename of the ruby distribution tarball.
# RUBY_WRKSRC - WRKSRC for the ruby port.
# MASTER_SITE_SUBDIR_RUBY - MASTER_SITE_SUBDIR for the ruby distfiles.
#
# RUBY_SHLIBVER - Major version of libruby (see below for current value).
# RUBY_ARCH - Set to target architecture name. (e.g. i386-freebsdelf4.3)
# RUBY_R - Extra suffix only defined when RUBY_WITH_PTHREAD is defined. (_r)
# RUBY_SUFFIX - Suffix for ruby binaries and directories. ${RUBY_R} or ${_RUBY_SUFFIX}.
# _RUBY_SUFFIX - String to be used as RUBY_SUFFIX. Always ${RUBY_VER:S/.//}${RUBY_R}.
# RUBY_WITHOUT_SUFFIX - Always ${LOCALBASE}/bin/ruby.
# RUBY_WITH_SUFFIX - Always ${RUBY_WITHOUT_SUFFIX}${_RUBY_SUFFIX}.
# RUBY_NAME - Ruby's name with trailing suffix.
#
# RUBY_MODNAME - Set to the module name (default: ${PORTNAME}).
#
# RUBY_RD2 - Full path of rd2 executable.
# RUBY_RDOC - Full path of rdoc executable.
#
# RUBY_PORT - Port path of ruby without PORTSDIR.
# RUBY_SHIM18_PORT - Port path of ruby16-shim-ruby18 without PORTSDIR.
# RUBY_AMSTD_PORT - Port path of ruby-amstd without PORTSDIR.
# RUBY_RDTOOL_PORT - Port path of rdtool without PORTSDIR.
# RUBY_RDOC_PORT - Port path of rdoc without PORTSDIR.
#
# DEPEND_LIBRUBY - LIB_DEPENDS entry for libruby.
# DEPEND_RUBY - BUILD_DEPENDS/RUN_DEPENDS entry for ruby.
# DEPEND_RUBY_SHIM18 - BUILD_DEPENDS/RUN_DEPENDS entry for ruby16-shim-ruby18.
# DEPEND_RUBY_AMSTD - BUILD_DEPENDS/RUN_DEPENDS entry for ruby-amstd.
# DEPEND_RUBY_RDTOOL - BUILD_DEPENDS entry for rdtool.
# DEPEND_RUBY_RDOC - BUILD_DEPENDS entry for rdoc.
#
# RUBY_LIBDIR - Installation path for architecture independent libraries.
# RUBY_ARCHLIBDIR - Installation path for architecture dependent libraries.
# RUBY_SITELIBDIR - Installation path for site architecture independent libraries.
# RUBY_SITEARCHLIBDIR - Installation path for site architecture dependent libraries.
# RUBY_DOCDIR - Installation path for documents.
# RUBY_EXAMPLESDIR - Installation path for examples.
# RUBY_MODDOCDIR - Installation path for the module's documents.
# RUBY_MODEXAMPLESDIR - Installation path for the module's examples.
# RUBY_ELISPDIR - Installation path for emacs lisp files.
#
#.if ${ARCH} == alpha || ${ARCH} == sparc64
#RUBY_VER?= 1.7
#.endif
.if defined(RUBY)
.if !exists(${RUBY})
.error You set the variable RUBY to "${RUBY}", but it does not seem to exist. Please specify an already installed ruby executable.
.endif
_RUBY_TEST!= ${RUBY} -e 'begin; require "rbconfig"; rescue LoadError; puts "error"; end'
.if !empty(_RUBY_TEST)
.error You set the variable RUBY to "${RUBY}", but it failed to include rbconfig. Please specify a properly installed ruby executable.
.endif
_RUBY_CONFIG= ${RUBY} -r rbconfig -e 'C = Config::CONFIG' -e
RUBY_VERSION!= ${_RUBY_CONFIG} 'puts VERSION'
RUBY_SUFFIX?= # empty
RUBY_ARCH!= ${_RUBY_CONFIG} 'puts C["target"]'
RUBY_NAME!= ${_RUBY_CONFIG} 'puts C["ruby_install_name"]'
_RUBY_SYSLIBDIR!= ${_RUBY_CONFIG} 'puts C["libdir"]'
_RUBY_SITEDIR!= ${_RUBY_CONFIG} 'puts C["sitedir"]'
.else
RUBY?= ${LOCALBASE}/bin/${RUBY_NAME}
.if defined(RUBY_VER) && ${RUBY_VER} == 1.7
RUBY_VERSION?= 1.7.3
RUBY_PORT?= lang/ruby${RUBY_R}-devel
RUBY_DISTVERSION?= ${RUBY_VERSION}-2002.12.12
#RUBY_PATCHFILES?= ruby-${RUBY_DISTVERSION}-yyyy.mm.dd.diff.bz2
RUBY_PORTVERSION?= ${RUBY_VERSION}.2002.12.12
MASTER_SITE_SUBDIR_RUBY= snapshots
.else
RUBY_VERSION?= 1.6.8
RUBY_DISTVERSION?= ${RUBY_VERSION}-preview3
#RUBY_PATCHFILES?= ruby-${RUBY_DISTVERSION}-yyyy.mm.dd.diff.bz2
RUBY_PORTVERSION?= ${RUBY_VERSION}.p3
RUBY_WRKSRC= ${WRKDIR}/ruby-${RUBY_VERSION}
MASTER_SITE_SUBDIR_RUBY= ${RUBY_VER}
.endif
# defined(RUBY_VER) && ${RUBY_VER} == 1.7
RUBY_ARCH?= ${ARCH}-freebsd${OSREL:C/\..*//}${RUBY_R}
RUBY_NAME?= ruby${RUBY_SUFFIX}
_RUBY_SYSLIBDIR?= ${LOCALBASE}/lib
_RUBY_SITEDIR?= ${_RUBY_SYSLIBDIR}/ruby/site_ruby
.endif
# defined(RUBY)
#.if ${ARCH} == alpha || ${ARCH} == sparc64
#RUBY_DEFAULT_VER?= 1.7
#.else
RUBY_DEFAULT_VER?= 1.6
#.endif
RUBY_DEFAULT_SUFFIX?= ${RUBY_DEFAULT_VER:S/.//}
RUBY_DISTVERSION?= ${RUBY_VERSION}
RUBY_PORTVERSION?= ${RUBY_VERSION}
RUBY_DISTNAME?= ruby-${RUBY_DISTVERSION}
RUBY_WRKSRC?= ${WRKDIR}/${RUBY_DISTNAME}
RUBY_VERSION_CODE?= ${RUBY_VERSION:S/.//g}
RUBY_VER= ${RUBY_VERSION:R}
_RUBY_SUFFIX= ${RUBY_VER:S/.//}${RUBY_R}
.if ${RUBY_VER} == ${RUBY_DEFAULT_VER}
RUBY_SUFFIX?= ${RUBY_R}
.else
RUBY_SUFFIX?= ${_RUBY_SUFFIX}
.endif
RUBY_WITHOUT_SUFFIX?= ${LOCALBASE}/bin/ruby
RUBY_WITH_SUFFIX?= ${RUBY_WITHOUT_SUFFIX}${_RUBY_SUFFIX}
RUBY_PKGNAMEPREFIX?= ruby${RUBY_SUFFIX}- # could be rb${RUBY_SUFFIX}-
RUBY_SHLIBVER?= ${RUBY_VER:S/.//}
CONFIGURE_TARGET= # empty
RUBY_CONFIGURE_ARGS+= --target="${RUBY_ARCH}" --program-prefix=""
.if defined(RUBY_WITH_PTHREAD)
RUBY_CONFIGURE_ARGS+= --with-libc_r=yes
RUBY_R= _r
.else
RUBY_CONFIGURE_ARGS+= --with-libc_r=no
RUBY_R= # none
.endif
.if !empty(RUBY_SUFFIX)
RUBY_CONFIGURE_ARGS+= --program-suffix="${RUBY_SUFFIX}"
.endif
RUBY_MODNAME?= ${PORTNAME}
# Commands
RUBY_RD2?= ${LOCALBASE}/bin/rd2
RUBY_RDOC?= ${LOCALBASE}/bin/rdoc
# Ports
RUBY_PORT?= lang/ruby${RUBY_SUFFIX}
RUBY_SHIM18_PORT?= lang/ruby16-shim-ruby18
RUBY_AMSTD_PORT?= devel/ruby-amstd
RUBY_RDTOOL_PORT?= textproc/ruby-rdtool
RUBY_RDOC_PORT?= textproc/ruby-rdoc
# Depends
DEPEND_LIBRUBY?= ${RUBY_NAME}.${RUBY_SHLIBVER}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY?= ${RUBY}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY_SHIM18?= ${RUBY_SITEARCHLIBDIR}/features/ruby18/file_ruby18.so:${PORTSDIR}/${RUBY_SHIM18_PORT}
DEPEND_RUBY_AMSTD?= ${RUBY_SITELIBDIR}/amstd/version.rb:${PORTSDIR}/${RUBY_AMSTD_PORT}
DEPEND_RUBY_RDTOOL?= ${RUBY_RD2}:${PORTSDIR}/${RUBY_RDTOOL_PORT}
DEPEND_RUBY_RDOC?= ${RUBY_RDOC}:${PORTSDIR}/${RUBY_RDOC_PORT}
# Directories
RUBY_LIBDIR?= ${_RUBY_SYSLIBDIR}/ruby/${RUBY_VER}
RUBY_ARCHLIBDIR?= ${RUBY_LIBDIR}/${RUBY_ARCH}
RUBY_SITELIBDIR?= ${_RUBY_SITEDIR}/${RUBY_VER}
RUBY_SITEARCHLIBDIR?= ${RUBY_SITELIBDIR}/${RUBY_ARCH}
RUBY_DOCDIR?= ${LOCALBASE}/share/doc/${RUBY_NAME}
RUBY_EXAMPLESDIR?= ${LOCALBASE}/share/examples/${RUBY_NAME}
RUBY_MODDOCDIR?= ${RUBY_DOCDIR}/${RUBY_MODNAME}
RUBY_MODEXAMPLESDIR?= ${RUBY_EXAMPLESDIR}/${RUBY_MODNAME}
RUBY_ELISPDIR?= ${_RUBY_SYSLIBDIR}/ruby/elisp
# PLIST
PLIST_RUBY_DIRS= RUBY_LIBDIR="${RUBY_LIBDIR}" \
RUBY_ARCHLIBDIR="${RUBY_ARCHLIBDIR}" \
RUBY_SITELIBDIR="${RUBY_SITELIBDIR}" \
RUBY_SITEARCHLIBDIR="${RUBY_SITEARCHLIBDIR}" \
RUBY_DOCDIR="${RUBY_DOCDIR}" \
RUBY_EXAMPLESDIR="${RUBY_EXAMPLESDIR}" \
RUBY_MODDOCDIR="${RUBY_MODDOCDIR}" \
RUBY_MODEXAMPLESDIR="${RUBY_MODEXAMPLESDIR}" \
RUBY_ELISPDIR="${RUBY_ELISPDIR}"
PLIST_SUB+= RUBY_VERSION="${RUBY_VERSION}" \
RUBY_VER="${RUBY_VER}" \
RUBY_SHLIBVER="${RUBY_SHLIBVER}" \
RUBY_ARCH="${RUBY_ARCH}" \
_RUBY_SUFFIX="${_RUBY_SUFFIX}" \
RUBY_SUFFIX="${RUBY_SUFFIX}" \
RUBY_NAME="${RUBY_NAME}" \
RUBY_R="${RUBY_R}" \
RUBY_DEFAULT_SUFFIX="${RUBY_DEFAULT_SUFFIX}" \
${PLIST_RUBY_DIRS:S,DIR="${LOCALBASE}/,DIR=",}
# require check
.if defined(RUBY_REQUIRE)
USE_RUBY= yes
.if exists(${RUBY})
RUBY_PROVIDED!= ${RUBY} -e '\
Ruby = ${RUBY_VERSION_CODE}; \
value = begin; ${RUBY_REQUIRE}; end and puts value'
.else
RUBY_PROVIDED= "should be" # the latest version is going to be installed
.endif
.if empty(RUBY_PROVIDED)
.undef RUBY_PROVIDED
.endif
.endif
# fix shebang lines
.if defined(RUBY_SHEBANG_FILES) && !empty(RUBY_SHEBANG_FILES)
USE_RUBY= yes
post-patch: ruby-shebang-patch
ruby-shebang-patch:
@cd ${WRKSRC}; for f in ${RUBY_SHEBANG_FILES}; do \
${ECHO_MSG} "===> Fixing the #! line of $$f"; \
${RUBY} ${RUBY_FLAGS} -i -p \
-e 'if $$. == 1; ' \
-e ' if /^#!/; ' \
-e ' sub /^#!\s*\S*(\benv\s+)?\bruby/, "#!${RUBY}";' \
-e ' else;' \
-e ' $$_ = "#!${RUBY}\n" + $$_;' \
-e ' end;' \
-e 'end' \
$$f; \
done
.endif
.if defined(DEBUG)
RUBY_FLAGS+= -d
.endif
# extconf.rb
.if defined(USE_RUBY_EXTCONF)
USE_RUBY= yes
RUBY_EXTCONF?= extconf.rb
CONFIGURE_ARGS+= --with-opt-dir="${LOCALBASE}" \
--with-pthread-cflags="${PTHREAD_CFLAGS}" \
--with-pthread-libs="${PTHREAD_LIBS}"
do-configure: ruby-extconf-configure
ruby-extconf-configure:
.if defined(RUBY_EXTCONF_SUBDIRS)
.for d in ${RUBY_EXTCONF_SUBDIRS}
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} in ${d} to configure"
.if defined(RUBY_WITH_PTHREAD)
cd ${CONFIGURE_WRKSRC}/${d}; \
${RUBY} ${RUBY_FLAGS} -i -pe '~ /\brequire\s+[\047"]mkmf[\047"]/ \
and $$_ += %Q|\
$$libs.sub!(/-lc\\b/, "")\n \
$$libs += " " + with_config("pthread-libs") + " "\n \
$$CFLAGS += " " + with_config("pthread-cflags") + " "\n \
|' ${RUBY_EXTCONF}
.endif
@cd ${CONFIGURE_WRKSRC}/${d}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endfor
.else
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} to configure"
.if defined(RUBY_WITH_PTHREAD)
cd ${CONFIGURE_WRKSRC}; if [ ! -e ${CONFIGURE_WRKSRC}/${RUBY_EXTCONF}.pth.orig ]; then \
${RUBY} ${RUBY_FLAGS} -i.pth.orig -pe '~ /\brequire\s+[\047"]mkmf[\047"]/ \
and $$_ += %Q|\
$$libs.sub!(/-lc\\b/, "")\n \
$$libs += " " + with_config("pthread-libs") + " "\n \
$$CFLAGS += " " + with_config("pthread-cflags") + " "\n \
|' ${RUBY_EXTCONF}; fi
.endif
@cd ${CONFIGURE_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endif
.endif
# setup.rb
.if defined(USE_RUBY_SETUP)
RUBY_SETUP?= setup.rb
do-configure: ruby-setup-configure
ruby-setup-configure:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to configure"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} config ${CONFIGURE_ARGS}
do-build: ruby-setup-build
ruby-setup-build:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to build"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} setup
do-install: ruby-setup-install
ruby-setup-install:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to install"
@cd ${INSTALL_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} install
.endif
.if defined(USE_LIBRUBY)
LIB_DEPENDS+= ${DEPEND_LIBRUBY}
.endif
.if defined(USE_RUBY)
.if !defined(RUBY_NO_BUILD_DEPENDS)
BUILD_DEPENDS+= ${DEPEND_RUBY}
.endif
.if !defined(RUBY_NO_RUN_DEPENDS)
RUN_DEPENDS+= ${DEPEND_RUBY}
.endif
.endif
.if defined(USE_RUBY_FEATURES)
shim= ${USE_RUBY_FEATURES:Mbenchmark} \
${USE_RUBY_FEATURES:Mdl} \
${USE_RUBY_FEATURES:Mfileutils} \
${USE_RUBY_FEATURES:Moptparse} \
${USE_RUBY_FEATURES:Mpp} \
${USE_RUBY_FEATURES:Mracc-runtime} \
${USE_RUBY_FEATURES:Mruby18} \
${USE_RUBY_FEATURES:Mset} \
${USE_RUBY_FEATURES:Mstringio} \
${USE_RUBY_FEATURES:Mstrscan} \
${USE_RUBY_FEATURES:Mtsort}
.if !empty(shim) && ${RUBY_VER} < 1.7
BUILD_DEPENDS+= ${DEPEND_RUBY_SHIM18}
RUN_DEPENDS+= ${DEPEND_RUBY_SHIM18}
.endif
.endif
.if defined(USE_RUBY_AMSTD)
BUILD_DEPENDS+= ${DEPEND_RUBY_AMSTD}
RUN_DEPENDS+= ${DEPEND_RUBY_AMSTD}
.endif
# documents
.if defined(NOPORTDOCS)
RUBY_NO_RD_HTML= yes
.endif
.if (${ARCH} == alpha || ${ARCH} == sparc64) && ${RUBY_VER} <= 1.6
RUBY_NO_RD_HTML= yes
.endif
.if defined(RUBY_RD_FILES) && !defined(RUBY_NO_RD_HTML)
USE_RUBY_RDTOOL= yes
RUBY_RD_HTML_FILES= ${RUBY_RD_FILES:S/.rb$//:S/.rd././:S/.rd$//:S/$/.html/}
PLIST_SUB+= RUBY_RD_HTML_FILES=""
pre-install: ruby-rd-build
ruby-rd-build:
.if !empty(RUBY_RD_FILES)
@${ECHO_MSG} "===> Generating HTML documents from RD documents"
@cd ${WRKSRC}; for rd in ${RUBY_RD_FILES}; do \
html=$$(echo $$rd | ${SED} 's/\.rb$$//;s/\.rd\././;s/\.rd$$//').html; \
${ECHO_MSG} "${RUBY_RD2} $$rd > $$html"; \
${RUBY_RD2} $$rd > $$html; \
done
.else
@${DO_NADA}
.endif
.else
RUBY_RD_HTML_FILES= # empty
PLIST_SUB+= RUBY_RD_HTML_FILES="@comment "
.endif
.if !defined(NOPORTDOCS) && defined(USE_RUBY_RDTOOL)
BUILD_DEPENDS+= ${DEPEND_RUBY_RDTOOL}
.endif
.if !defined(NOPORTDOCS) && defined(USE_RUBY_RDOC)
BUILD_DEPENDS+= ${DEPEND_RUBY_RDOC}
.endif
MASTER_SITE_BACKUP+= \
ftp://ftp.iDaemons.org/pub/distfiles/${DIST_SUBDIR}/
.endif
Reference in New Issue View Git Blame Copy Permalink