Rene Ladan a762c4c8ec comms/dcf77pi: update to 2.0.1 ... - support DESTDIR and install-strip, uninstall targets in upstream Makefile - clean up port Makefile accordingly - bugfix: do not accept removed 'S' command line option - bugfix: display 'no minute' at the correct position in GUI mode - do not leak curses memory at exit		2014-02-21 12:31:53 +00:00
..
acfax
aldo
amtterm
anyremote	- update to 6.3.2	2014-02-14 20:49:21 +00:00
aprsd	- Enable staging	2013-12-30 21:07:40 +00:00
atslog
bfhist	Support staging	2014-02-16 12:16:37 +00:00
bforce
bforce-kst
birda	- Stage support	2014-02-12 10:17:07 +00:00
bluegps	Support staging	2014-02-16 12:22:52 +00:00
bluez-firmware
bpl+
callsign
cdr_read
chirp	- Add LICENSE	2013-12-27 21:10:53 +00:00
chu	Remove useless dancing of pre.mk/post.mk	2013-12-28 17:13:30 +00:00
comserv
conserver	Fix properties on pkg-plist	2014-01-21 23:18:05 +00:00
conserver-com	- Support staging	2014-02-16 12:27:41 +00:00
cutecom	- Stage support	2014-02-21 01:53:26 +00:00
cwdaemon	- convert to stage	2013-12-29 16:17:51 +00:00
dabstick-radio	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
dcf77pi	comms/dcf77pi: update to 2.0.1	2014-02-21 12:31:53 +00:00
deforaos-phone
dfu-programmer	Support staging and add LICENSE.	2014-02-16 12:57:07 +00:00
dfu-util
ebook2cw	- convert to stage	2013-12-29 00:33:17 +00:00
ebook2cwgui	- convert to stage	2013-12-21 16:58:34 +00:00
echolinux	- Chase x11-toolkits/xforms shlib bump	2014-01-08 09:53:50 +00:00
efax	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
efax-gtk
ems-flasher
esmska	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
fl_moxgen
fldigi	Chase boost and icu bump	2014-02-07 11:44:08 +00:00
flwrap	- convert old USE_GMAKE and USE_DOS2UNIX to new Uses=	2014-01-07 01:16:36 +00:00
gammu
gammu-devel	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
ge-x2212	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
geoid	- Enable staging	2013-12-30 21:12:16 +00:00
gkermit
gmfsk
gnocky	- Stage support	2013-12-31 12:27:57 +00:00
gnokii	Update to 1.0.	2014-01-12 19:48:11 +00:00
gnuradio	- Bump PORTREVISION after KDE4_PREFIX change	2014-02-18 14:31:32 +00:00
gpredict
gpsk31
gqrx	- Bump PORTREVISION after KDE4_PREFIX change	2014-02-18 14:31:32 +00:00
gr-osmosdr	- Bump PORTREVISION after KDE4_PREFIX change	2014-02-18 14:31:32 +00:00
grig
gscmxx
gsmlib	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
gstreamer1-plugins-spandsp
gtkmmorse	Update freetype to 2.5.2.	2013-12-24 21:22:21 +00:00
hamfax	- Stage support	2014-02-21 01:55:10 +00:00
hamlib	- Convert to USES=tcl	2014-01-29 13:32:25 +00:00
hcidump	Stage support	2014-01-20 18:28:51 +00:00
hf
hidapi	- Remove part of a patch that wasn't entirely correct and let the port	2014-01-29 21:01:51 +00:00
hylafax	- preserve etc/hosts.hfaxd	2014-02-14 14:33:24 +00:00
ibp	- Enable staging	2013-12-30 21:30:58 +00:00
java-commapi
java-commapi-freebsd
jerm
jsdr
kb	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
kermit
kremotecontrol	KDE/FreeBSD team presents KDE SC 4.12.2 and KDE Workspace 4.11.6!	2014-02-18 14:23:03 +00:00
libfec	Unbreak on FreeBSD 10.	2014-01-17 12:22:13 +00:00
libimobiledevice
libirman	- Stage support	2014-02-21 01:59:31 +00:00
libmodbus
libticables2
libticalcs2
linrad	Convert comms to MDOCS and MEXAMPLES.	2014-01-03 16:06:00 +00:00
lirc	- Switch to USES= gmake.	2014-01-26 17:37:03 +00:00
locator	- Enable stage	2013-12-30 01:20:55 +00:00
lrzsz	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
mgetty+sendfax
minicom	Remove option description that is no longer used	2014-02-08 21:46:47 +00:00
mlan3	- Stage support	2014-01-20 18:32:19 +00:00
morse	Support staging and add LICENSE	2014-02-08 21:45:20 +00:00
nasawash	- Stage support	2014-02-12 10:36:55 +00:00
ncid	- Convert to USES=gmake tk	2014-01-29 13:33:39 +00:00
nec2c	- Enabled stagedir	2013-12-30 21:59:55 +00:00
nokryptia	Fix LIB_DEPENDS	2013-12-20 11:53:44 +00:00
o2sms	- Stage support	2014-02-12 10:16:57 +00:00
obexapp
openobex
p5-Cisco-UCS	- add stage support	2014-01-30 10:27:43 +00:00
p5-Device-Gsm	- add stage support	2014-01-30 10:27:43 +00:00
p5-Device-Modem	- Update to 1.57	2014-02-10 15:45:36 +00:00
p5-Device-SerialPort
p5-Fax-Hylafax-Client
p5-Nexmo-SMS	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-DeviceGsm	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-NexmoUnicode	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-chtsns	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-emome	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-HiAir	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-PChome	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-Qma	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-ShareSMS	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-Socket2Air	- add stage support	2014-01-30 10:27:43 +00:00
p5-SMS-SMS77	Support staging.	2014-02-05 13:11:05 +00:00
pear-Horde_ActiveSync	Horde package update	2014-02-10 00:53:49 +00:00
pear-Horde_SyncMl
picocom
pr
predict	- Add STAGEDIR to port	2013-12-29 00:01:51 +00:00
py-bulksms	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
py-libimobiledevice
py-lirc
py-serial	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
pyla
qico	Support staging	2014-02-20 08:03:45 +00:00
qpage	Reduce over inclusion of bsd.port.mk	2014-01-15 23:22:46 +00:00
qrq	- convert to use stage	2013-12-28 04:37:38 +00:00
qsstv	Clean up port Makefile and patch sources to respect PREFIX (this also fixes	2014-01-08 08:36:34 +00:00
remserial	Eliminate inclusion of bsd.port.options.mk where PORT_OPTIONS is not tested for	2014-02-13 09:39:20 +00:00
rtl-sdr
rubygem-callsign	- Add LICENSE	2013-12-31 10:09:00 +00:00
rubygem-ruby-termios
rxtx
scmxx	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
ser2net
serialoverip
seyon
smstools3	- Add note in rc script on how to log to syslog	2014-01-30 09:14:15 +00:00
soundmodem
spandsp
spandsp-devel
splat	- Enable stage	2013-12-30 00:34:53 +00:00
sredird
syncterm	Reduce over inclusion of bsd.port.mk	2014-01-15 23:23:32 +00:00
tcpser
thebridge
tilp2
tits	- Support staging	2014-02-08 21:38:46 +00:00
tkhylafax
tkscanfax
tlf
trustedqsl	- Fix runtime core	2014-02-02 02:16:37 +00:00
twpsk
uarduno
uartlirc	Remove duplicate SSP_UNSAFE that's already set by USES= kmod.	2014-01-26 15:55:43 +00:00
uird	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
unixcw	- Update to latest 3.3.0	2013-12-30 19:41:21 +00:00
usbmuxd
usrp	Chase boost and icu bump	2014-02-07 11:44:08 +00:00
viewfax	- Stage support	2014-02-12 10:47:06 +00:00
vrflash	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
wsjt	Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases	2014-02-16 17:15:31 +00:00
wspr	Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases	2014-02-16 17:15:31 +00:00
wwl	- convert to stage	2013-12-28 05:03:44 +00:00
wy60	Fix properties on pkg-plist	2014-01-21 23:18:05 +00:00
xastir
xdx
xlog
xmorse	comms/xmorse: Fix build on F10+, support stage	2014-01-25 09:28:51 +00:00
xnecview
xwota	- Enable stage	2013-12-30 01:03:13 +00:00
yagiuda	- Fix under stage	2013-12-30 00:08:15 +00:00
yaps
yfklog	According to the Porter's Handbook (5.12.2.3.) default options must be added to	2014-02-10 13:54:26 +00:00
zmtx-zmrx	Support staging	2014-02-16 14:12:10 +00:00
zssh
Makefile	- Keep category Makefiles sorted	2014-01-28 03:25:28 +00:00