1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-25 04:43:33 +00:00
freebsd-ports/Mk/bsd.kde4.mk
Will Andrews d93aec5a0b Update to 3.0.2 (full log):
General:
[1] Add a means of updating via patches rather than always using tarballs.
    Unfortunately, this method proved unreliable due to the binary files
    included with most of the KDE tarballs.  For now, leave this support
    in until I can decide what to do with it.
[2] Remove patches that were fixed in KDE CVS for KDE_3_0_BRANCH.  This
    includes removal of malloc.h (from our viewpoint at least), a bug in
    kiconloader, and a typo in knode.
[3] Move the current KDE version number to KDE_VERSION in bsd.kde.mk.
[4] Support the notion of KDE_PREFIX.
[5] Move arts and kde3-i18n* ports to use Makefile.kde.

french/kde3-i18n:
[6] Remove cruft from when this was generated with a core dump in the
    3.0.1 distribution generation.

All other ports: No changes of note not mentioned above.

Thanks to the quick testers for their assistance with this upgrade:
Tested by:	Matt Douhan <matt@athame.co.uk>
		Andy Fawcett <andy@athame.co.uk>
		Dave Cantrell <phaedrus@alltel.net>
2002-07-04 19:35:44 +00:00

151 lines
4.1 KiB
Makefile

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Please view me with 4 column tabs!
# Please make sure all changes to this file are past through the maintainer.
# Do not commit them yourself (unless of course you're the Port's Wraith ;).
KDE_MAINTAINER= will@FreeBSD.org
# This section contains the USE_ definitions.
# XXX: Write HAVE_ definitions sometime.
# USE_QT_VER - Says that the port uses the Qt toolkit. Possible values:
# 1, 2, or 3; each specify the major version of Qt to use.
# This implies USE_NEWGCC.
# USE_KDELIBS_VER - Says that the port uses KDE libraries. Possible values:
# 1, 2, or 3; each specify the major version of KDE to use.
# This implies USE_QT of the appropriate version.
# USE_KDEBASE_VER - Says that the port uses the KDE base. Possible values:
# 1, 2, or 3; each specify the major version of KDE to use.
# This implies USE_KDELIBS of the appropriate version.
#
# WARNING! ACHTUNG! DANGER WILL ROBINSON!
# DO NOT USE USE_QT_VER=1 UNLESS YOU WILL NOT BE NEEDING ANY ASSISTANCE
# WHATSOEVER FROM THE MAINTAINER OF THIS FILE!
#
# Compat shims.
.if defined(USE_QT)
USE_QT_VER= 2
pre-everything::
@${ECHO} ">>> Warning: this port needs to be updated as it uses the old-style USE_QT variable!"
.endif
.if defined(USE_QT2)
USE_QT_VER= 2
pre-everything::
@${ECHO} ">>> Warning: this port needs to be updated as it uses the old-style USE_QT2 variable!"
.endif
# USE_KDEBASE_VER section
.if defined(USE_KDEBASE_VER)
.if ${USE_KDEBASE_VER} == 3
# kdebase 3.x common stuff
LIB_DEPENDS+= konq:${PORTSDIR}/x11/kdebase3
USE_KDELIBS_VER=3
.else
# kdebase 2.x common stuff -- DEFAULT
LIB_DEPENDS+= konq.4:${PORTSDIR}/x11/kdebase2
USE_KDELIBS_VER=2
.endif
.endif
# End of USE_KDEBASE_VER
# USE_KDELIBS_VER section
.if defined(USE_KDELIBS_VER)
.if ${USE_KDELIBS_VER} == 3
# kdelibs 3.x common stuff
LIB_DEPENDS+= kdecore:${PORTSDIR}/x11/kdelibs3
USE_QT_VER= 3
PREFIX= ${KDE_PREFIX}
.else
# kdelibs 2.x common stuff -- DEFAULT
LIB_DEPENDS+= kdecore.4:${PORTSDIR}/x11/kdelibs2
USE_QT_VER= 2
.endif
.endif
# End of USE_KDELIBS_VER section
# USE_QT_VER section
.if defined(USE_QT_VER)
# Qt 1.x common stuff
.if ${USE_QT_VER} == 1
LIB_DEPENDS+= qt1.3:${PORTSDIR}/x11-toolkits/qt145
USE_NEWGCC= yes
MOC?= ${X11BASE}/bin/moc1
.if defined(PREFIX)
QTDIR= ${PREFIX}
.else
QTDIR= ${X11BASE}
.endif
CONFIGURE_ENV+= MOC="${MOC}" QTDIR="${QTDIR}"
.elif ${USE_QT_VER} == 3
# Yeah, it's namespace pollution, but this is really the best place for this
# stuff since arts/kdelibs use it.
KDE_VERSION= 3.0.2
KDE_ORIGVER= 3.0.1
KDE_PREFIX?= ${LOCALBASE}
QTCPPFLAGS?=
QTCGFLIBS?=
# Qt 3.x common stuff
QT_PREFIX?= ${X11BASE}
MOC?= ${QT_PREFIX}/bin/moc
#LIB_DEPENDS+= qt-mt.3:${PORTSDIR}/x11-toolkits/qt30
BUILD_DEPENDS+= ${QT_PREFIX}/bin/moc:${PORTSDIR}/x11-toolkits/qt30
RUN_DEPENDS+= ${QT_PREFIX}/bin/moc:${PORTSDIR}/x11-toolkits/qt30
USE_NEWGCC= yes
QTCPPFLAGS+= -I${LOCALBASE}/include -I${PREFIX}/include \
-I${QT_PREFIX}/include
QTCFGLIBS+= -Wl,-export-dynamic -L${LOCALBASE}/lib -L${X11BASE}/lib -ljpeg \
-L${QT_PREFIX}/lib
.if !defined(QT_NONSTANDARD)
CONFIGURE_ARGS+=--with-qt-includes=${QT_PREFIX}/include \
--with-qt-libraries=${QT_PREFIX}/lib \
--with-extra-libs=${LOCALBASE}/lib
CONFIGURE_ENV+= MOC="${MOC}" CPPFLAGS="${QTCPPFLAGS}" LIBS="${QTCFGLIBS}"
.endif
.else
QTCPPFLAGS?=
QTCGFLIBS?=
# Qt 2.x common stuff -- DEFAULT
LIB_DEPENDS+= qt2.4:${PORTSDIR}/x11-toolkits/qt23
USE_NEWGCC= yes
QTNAME= qt2
MOC?= ${X11BASE}/bin/moc2
QTCPPFLAGS+= -D_GETOPT_H -I${LOCALBASE}/include -I${PREFIX}/include \
-I${X11BASE}/include/qt2
QTCFGLIBS+= -Wl,-export-dynamic -L${LOCALBASE}/lib -L${X11BASE}/lib -ljpeg -lgcc -lstdc++
.if !defined(QT_NONSTANDARD)
CONFIGURE_ARGS+=--with-qt-includes=${X11BASE}/include/qt2 \
--with-qt-libraries=${X11BASE}/lib \
--with-extra-libs=${LOCALBASE}/lib
CONFIGURE_ENV+= MOC="${MOC}" LIBQT="-l${QTNAME}" \
CPPFLAGS="${QTCPPFLAGS}" LIBS="${QTCFGLIBS}"
.endif
.endif
.endif
# End of USE_QT_VER section
# End of use part.