1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/sbin/ipfw/ipfw2.h

452 lines
10 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2002-2003 Luigi Rizzo
* Copyright (c) 1996 Alex Nash, Paul Traina, Poul-Henning Kamp
* Copyright (c) 1994 Ugen J.S.Antsilevich
*
* Idea and grammar partially left from:
* Copyright (c) 1993 Daniel Boulet
*
* Redistribution and use in source forms, with and without modification,
* are permitted provided that this entire comment appears intact.
*
* Redistribution in binary form may occur without any restrictions.
* Obviously, it would be nice if you gave credit where credit is due
* but requiring it would be too onerous.
*
* This software is provided ``AS IS'' without any warranties of any kind.
*
* NEW command line interface for IP firewall facility
*
* $FreeBSD$
*/
/*
* Options that can be set on the command line.
* When reading commands from a file, a subset of the options can also
* be applied globally by specifying them before the file name.
* After that, each line can contain its own option that changes
* the global value.
* XXX The context is not restored after each line.
*/
struct cmdline_opts {
/* boolean options: */
int do_value_as_ip; /* show table value as IP */
int do_resolv; /* try to resolve all ip to names */
int do_time; /* Show time stamps */
int do_quiet; /* Be quiet in add and flush */
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
int do_pipe; /* this cmd refers to a pipe/queue/sched */
int do_nat; /* this cmd refers to a nat config */
int do_compact; /* show rules in compact mode */
int do_force; /* do not ask for confirmation */
int show_sets; /* display the set each rule belongs to */
int test_only; /* only check syntax */
int comment_only; /* only print action and comment */
int verbose; /* be verbose on some commands */
/* The options below can have multiple values. */
int do_dynamic; /* 1 - display dynamic rules */
/* 2 - display/delete only dynamic rules */
int do_sort; /* field to sort results (0 = no) */
/* valid fields are 1 and above */
int use_set; /* work with specified set number */
/* 0 means all sets, otherwise apply to set use_set - 1 */
};
enum {
TIMESTAMP_NONE = 0,
TIMESTAMP_STRING,
TIMESTAMP_NUMERIC,
};
extern struct cmdline_opts co;
/*
* _s_x is a structure that stores a string <-> token pairs, used in
* various places in the parser. Entries are stored in arrays,
* with an entry with s=NULL as terminator.
* The search routines are match_token() and match_value().
* Often, an element with x=0 contains an error string.
*
*/
struct _s_x {
char const *s;
int x;
};
extern struct _s_x f_ipdscp[];
enum tokens {
TOK_NULL=0,
TOK_OR,
TOK_NOT,
TOK_STARTBRACE,
TOK_ENDBRACE,
TOK_ABORT6,
TOK_ABORT,
TOK_ACCEPT,
TOK_COUNT,
TOK_EACTION,
TOK_PIPE,
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
TOK_LINK,
TOK_QUEUE,
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
TOK_FLOWSET,
TOK_SCHED,
TOK_DIVERT,
TOK_TEE,
TOK_NETGRAPH,
TOK_NGTEE,
TOK_FORWARD,
TOK_SKIPTO,
TOK_DENY,
TOK_REJECT,
TOK_RESET,
TOK_UNREACH,
TOK_CHECKSTATE,
TOK_NAT,
TOK_REASS,
TOK_CALL,
TOK_RETURN,
TOK_ALTQ,
TOK_LOG,
TOK_TAG,
TOK_UNTAG,
TOK_TAGGED,
TOK_UID,
TOK_GID,
TOK_JAIL,
TOK_IN,
TOK_LIMIT,
TOK_SETLIMIT,
TOK_KEEPSTATE,
TOK_RECORDSTATE,
TOK_LAYER2,
TOK_OUT,
TOK_DIVERTED,
TOK_DIVERTEDLOOPBACK,
TOK_DIVERTEDOUTPUT,
TOK_XMIT,
TOK_RECV,
TOK_VIA,
TOK_FRAG,
TOK_IPOPTS,
TOK_IPLEN,
TOK_IPID,
TOK_IPPRECEDENCE,
TOK_DSCP,
TOK_IPTOS,
TOK_IPTTL,
TOK_IPVER,
TOK_ESTAB,
TOK_SETUP,
TOK_TCPDATALEN,
TOK_TCPFLAGS,
TOK_TCPOPTS,
TOK_TCPSEQ,
TOK_TCPACK,
TOK_TCPMSS,
TOK_TCPWIN,
TOK_ICMPTYPES,
TOK_MAC,
TOK_MACTYPE,
TOK_VERREVPATH,
TOK_VERSRCREACH,
TOK_ANTISPOOF,
TOK_IPSEC,
TOK_COMMENT,
TOK_PLR,
TOK_NOERROR,
TOK_BUCKETS,
TOK_DSTIP,
TOK_SRCIP,
TOK_DSTPORT,
TOK_SRCPORT,
TOK_ALL,
TOK_MASK,
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
TOK_FLOW_MASK,
TOK_SCHED_MASK,
TOK_BW,
TOK_DELAY,
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
TOK_PROFILE,
TOK_BURST,
TOK_RED,
TOK_GRED,
TOK_ECN,
TOK_DROPTAIL,
TOK_PROTO,
Import Dummynet AQM version 0.2.1 (CoDel, FQ-CoDel, PIE and FQ-PIE). Centre for Advanced Internet Architectures Implementing AQM in FreeBSD * Overview <http://caia.swin.edu.au/freebsd/aqm/index.html> * Articles, Papers and Presentations <http://caia.swin.edu.au/freebsd/aqm/papers.html> * Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html> Overview Recent years have seen a resurgence of interest in better managing the depth of bottleneck queues in routers, switches and other places that get congested. Solutions include transport protocol enhancements at the end-hosts (such as delay-based or hybrid congestion control schemes) and active queue management (AQM) schemes applied within bottleneck queues. The notion of AQM has been around since at least the late 1990s (e.g. RFC 2309). In recent years the proliferation of oversized buffers in all sorts of network devices (aka bufferbloat) has stimulated keen community interest in four new AQM schemes -- CoDel, FQ-CoDel, PIE and FQ-PIE. The IETF AQM working group is looking to document these schemes, and independent implementations are a corner-stone of the IETF's process for confirming the clarity of publicly available protocol descriptions. While significant development work on all three schemes has occured in the Linux kernel, there is very little in FreeBSD. Project Goals This project began in late 2015, and aims to design and implement functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE in FreeBSD (with code BSD-licensed as much as practical). We have chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall and traffic shaper. Implementation of these AQM schemes in FreeBSD will: * Demonstrate whether the publicly available documentation is sufficient to enable independent, functionally equivalent implementations * Provide a broader suite of AQM options for sections the networking community that rely on FreeBSD platforms Program Members: * Rasool Al Saadi (developer) * Grenville Armitage (project lead) Acknowledgements: This project has been made possible in part by a gift from the Comcast Innovation Fund. Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au> X-No objection: core MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6388
2016-05-26 21:40:13 +00:00
#ifdef NEW_AQM
/* AQM tokens*/
TOK_NO_ECN,
TOK_CODEL,
TOK_FQ_CODEL,
TOK_TARGET,
TOK_INTERVAL,
TOK_FLOWS,
TOK_QUANTUM,
TOK_PIE,
TOK_FQ_PIE,
TOK_TUPDATE,
TOK_MAX_BURST,
TOK_MAX_ECNTH,
TOK_ALPHA,
TOK_BETA,
TOK_CAPDROP,
TOK_NO_CAPDROP,
TOK_ONOFF,
TOK_DRE,
TOK_TS,
TOK_DERAND,
TOK_NO_DERAND,
#endif
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
/* dummynet tokens */
TOK_WEIGHT,
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
TOK_LMAX,
TOK_PRI,
TOK_TYPE,
TOK_SLOTSIZE,
TOK_IP,
TOK_IF,
TOK_ALOG,
TOK_DENY_INC,
TOK_SAME_PORTS,
TOK_UNREG_ONLY,
TOK_SKIP_GLOBAL,
TOK_RESET_ADDR,
TOK_ALIAS_REV,
TOK_PROXY_ONLY,
TOK_REDIR_ADDR,
TOK_REDIR_PORT,
TOK_REDIR_PROTO,
TOK_IPV6,
TOK_FLOWID,
TOK_ICMP6TYPES,
TOK_EXT6HDR,
TOK_DSTIP6,
TOK_SRCIP6,
TOK_IPV4,
TOK_UNREACH6,
TOK_RESET6,
TOK_FIB,
TOK_SETFIB,
TOK_LOOKUP,
TOK_SOCKARG,
TOK_SETDSCP,
TOK_FLOW,
TOK_IFLIST,
/* Table tokens */
TOK_CREATE,
TOK_DESTROY,
TOK_LIST,
TOK_INFO,
TOK_DETAIL,
TOK_MODIFY,
TOK_FLUSH,
TOK_SWAP,
TOK_ADD,
TOK_DEL,
TOK_VALTYPE,
TOK_ALGO,
TOK_TALIST,
TOK_ATOMIC,
TOK_LOCK,
TOK_UNLOCK,
Add support for multi-field values inside ipfw tables. This is the last major change in given branch. Kernel changes: * Use 64-bytes structures to hold multi-value variables. * Use shared array to hold values from all tables (assume each table algo is capable of holding 32-byte variables). * Add some placeholders to support per-table value arrays in future. * Use simple eventhandler-style API to ease the process of adding new table items. Currently table addition may required multiple UH drops/ acquires which is quite tricky due to atomic table modificatio/swap support, shared array resize, etc. Deal with it by calling special notifier capable of rolling back state before actually performing swap/resize operations. Original operation then restarts itself after acquiring UH lock. * Bump all objhash users default values to at least 64 * Fix custom hashing inside objhash. Userland changes: * Add support for dumping shared value array via "vlist" internal cmd. * Some small print/fill_flags dixes to support u32 values. * valtype is now bitmask of <skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>. New values can hold distinct values for each of this types. * Provide special "legacy" type which assumes all values are the same. * More helpers/docs following.. Some examples: 3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6 3:41 [1] zfscurr0# ipfw table mimimi info +++ table(mimimi), set(0) +++ kindex: 2, type: addr references: 0, valtype: skipto,limit,ipv4,ipv6 algorithm: addr:radix items: 0, size: 296 3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1 added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1 3:42 [1] zfscurr0# ipfw table mimimi list +++ table(mimimi), set(0) +++ 10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
2014-08-31 23:51:09 +00:00
TOK_VLIST,
TOK_OLIST,
TOK_MISSING,
TOK_ORFLUSH,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
/* NAT64 tokens */
TOK_NAT64STL,
TOK_NAT64LSN,
TOK_STATS,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
TOK_STATES,
TOK_CONFIG,
TOK_TABLE4,
TOK_TABLE6,
TOK_PREFIX4,
TOK_PREFIX6,
TOK_AGG_LEN,
TOK_AGG_COUNT,
TOK_MAX_PORTS,
TOK_STATES_CHUNKS,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
TOK_JMAXLEN,
TOK_PORT_RANGE,
TOK_HOST_DEL_AGE,
TOK_PG_DEL_AGE,
TOK_TCP_SYN_AGE,
TOK_TCP_CLOSE_AGE,
TOK_TCP_EST_AGE,
TOK_UDP_AGE,
TOK_ICMP_AGE,
TOK_LOGOFF,
TOK_PRIVATE,
TOK_PRIVATEOFF,
/* NAT64 CLAT tokens */
TOK_NAT64CLAT,
TOK_PLAT_PREFIX,
TOK_CLAT_PREFIX,
/* NPTv6 tokens */
TOK_NPTV6,
TOK_INTPREFIX,
TOK_EXTPREFIX,
TOK_PREFIXLEN,
TOK_EXTIF,
TOK_TCPSETMSS,
TOK_SKIPACTION,
};
/*
* the following macro returns an error message if we run out of
* arguments.
*/
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
#define NEED(_p, msg) {if (!_p) errx(EX_USAGE, msg);}
#define NEED1(msg) {if (!(*av)) errx(EX_USAGE, msg);}
struct buf_pr {
char *buf; /* allocated buffer */
char *ptr; /* current pointer */
size_t size; /* total buffer size */
size_t avail; /* available storage */
size_t needed; /* length needed */
};
int pr_u64(struct buf_pr *bp, uint64_t *pd, int width);
int bp_alloc(struct buf_pr *b, size_t size);
void bp_free(struct buf_pr *b);
int bprintf(struct buf_pr *b, char *format, ...);
/* memory allocation support */
void *safe_calloc(size_t number, size_t size);
void *safe_realloc(void *ptr, size_t size);
/* string comparison functions used for historical compatibility */
int _substrcmp(const char *str1, const char* str2);
int _substrcmp2(const char *str1, const char* str2, const char* str3);
int stringnum_cmp(const char *a, const char *b);
/* utility functions */
int match_token(struct _s_x *table, const char *string);
int match_token_relaxed(struct _s_x *table, const char *string);
int get_token(struct _s_x *table, const char *string, const char *errbase);
char const *match_value(struct _s_x *p, int value);
size_t concat_tokens(char *buf, size_t bufsize, struct _s_x *table,
char *delimiter);
Add support for multi-field values inside ipfw tables. This is the last major change in given branch. Kernel changes: * Use 64-bytes structures to hold multi-value variables. * Use shared array to hold values from all tables (assume each table algo is capable of holding 32-byte variables). * Add some placeholders to support per-table value arrays in future. * Use simple eventhandler-style API to ease the process of adding new table items. Currently table addition may required multiple UH drops/ acquires which is quite tricky due to atomic table modificatio/swap support, shared array resize, etc. Deal with it by calling special notifier capable of rolling back state before actually performing swap/resize operations. Original operation then restarts itself after acquiring UH lock. * Bump all objhash users default values to at least 64 * Fix custom hashing inside objhash. Userland changes: * Add support for dumping shared value array via "vlist" internal cmd. * Some small print/fill_flags dixes to support u32 values. * valtype is now bitmask of <skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>. New values can hold distinct values for each of this types. * Provide special "legacy" type which assumes all values are the same. * More helpers/docs following.. Some examples: 3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6 3:41 [1] zfscurr0# ipfw table mimimi info +++ table(mimimi), set(0) +++ kindex: 2, type: addr references: 0, valtype: skipto,limit,ipv4,ipv6 algorithm: addr:radix items: 0, size: 296 3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1 added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1 3:42 [1] zfscurr0# ipfw table mimimi list +++ table(mimimi), set(0) +++ 10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
2014-08-31 23:51:09 +00:00
int fill_flags(struct _s_x *flags, char *p, char **e, uint32_t *set,
uint32_t *clear);
void print_flags_buffer(char *buf, size_t sz, struct _s_x *list, uint32_t set);
struct _ip_fw3_opheader;
int do_cmd(int optname, void *optval, uintptr_t optlen);
int do_set3(int optname, struct _ip_fw3_opheader *op3, size_t optlen);
int do_get3(int optname, struct _ip_fw3_opheader *op3, size_t *optlen);
struct in6_addr;
void n2mask(struct in6_addr *mask, int n);
int contigmask(uint8_t *p, int len);
/*
* Forward declarations to avoid include way too many headers.
* C does not allow duplicated typedefs, so we use the base struct
* that the typedef points to.
* Should the typedefs use a different type, the compiler will
* still detect the change when compiling the body of the
* functions involved, so we do not lose error checking.
*/
struct _ipfw_insn;
struct _ipfw_insn_altq;
struct _ipfw_insn_u32;
struct _ipfw_insn_ip6;
struct _ipfw_insn_icmp6;
/*
* The reserved set numer. This is a constant in ip_fw.h
* but we store it in a variable so other files do not depend
* in that header just for one constant.
*/
extern int resvd_set_number;
/* first-level command handlers */
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
void ipfw_add(char *av[]);
void ipfw_show_nat(int ac, char **av);
void ipfw_config_pipe(int ac, char **av);
void ipfw_config_nat(int ac, char **av);
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
void ipfw_sets_handler(char *av[]);
void ipfw_table_handler(int ac, char *av[]);
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
void ipfw_sysctl_handler(char *av[], int which);
void ipfw_delete(char *av[]);
void ipfw_flush(int force);
void ipfw_zero(int ac, char *av[], int optname);
void ipfw_list(int ac, char *av[], int show_counters);
void ipfw_internal_handler(int ac, char *av[]);
void ipfw_nat64clat_handler(int ac, char *av[]);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
void ipfw_nat64lsn_handler(int ac, char *av[]);
void ipfw_nat64stl_handler(int ac, char *av[]);
void ipfw_nptv6_handler(int ac, char *av[]);
int ipfw_check_object_name(const char *name);
int ipfw_check_nat64prefix(const struct in6_addr *prefix, int length);
#ifdef PF
/* altq.c */
void altq_set_enabled(int enabled);
u_int32_t altq_name_to_qid(const char *name);
void print_altq_cmd(struct buf_pr *bp, struct _ipfw_insn_altq *altqptr);
#else
#define NO_ALTQ
#endif
/* dummynet.c */
Bring in the most recent version of ipfw and dummynet, developed and tested over the past two months in the ipfw3-head branch. This also happens to be the same code available in the Linux and Windows ports of ipfw and dummynet. The major enhancement is a completely restructured version of dummynet, with support for different packet scheduling algorithms (loadable at runtime), faster queue/pipe lookup, and a much cleaner internal architecture and kernel/userland ABI which simplifies future extensions. In addition to the existing schedulers (FIFO and WF2Q+), we include a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new, very fast version of WF2Q+ called QFQ. Some test code is also present (in sys/netinet/ipfw/test) that lets you build and test schedulers in userland. Also, we have added a compatibility layer that understands requests from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries, and replies correctly (at least, it does its best; sometimes you just cannot tell who sent the request and how to answer). The compatibility layer should make it possible to MFC this code in a relatively short time. Some minor glitches (e.g. handling of ipfw set enable/disable, and a workaround for a bug in RELENG_7's /sbin/ipfw) will be fixed with separate commits. CREDITS: This work has been partly supported by the ONELAB2 project, and mostly developed by Riccardo Panicucci and myself. The code for the qfq scheduler is mostly from Fabio Checconi, and Marta Carbone and Francesco Magno have helped with testing, debugging and some bug fixes.
2010-03-02 17:40:48 +00:00
void dummynet_list(int ac, char *av[], int show_counters);
void dummynet_flush(void);
int ipfw_delete_pipe(int pipe_or_queue, int n);
/* ipv6.c */
void print_unreach6_code(struct buf_pr *bp, uint16_t code);
void print_ip6(struct buf_pr *bp, struct _ipfw_insn_ip6 *cmd);
void print_flow6id(struct buf_pr *bp, struct _ipfw_insn_u32 *cmd);
void print_icmp6types(struct buf_pr *bp, struct _ipfw_insn_u32 *cmd);
void print_ext6hdr(struct buf_pr *bp, struct _ipfw_insn *cmd );
struct tidx;
struct _ipfw_insn *add_srcip6(struct _ipfw_insn *cmd, char *av, int cblen,
struct tidx *tstate);
struct _ipfw_insn *add_dstip6(struct _ipfw_insn *cmd, char *av, int cblen,
struct tidx *tstate);
void fill_flow6(struct _ipfw_insn_u32 *cmd, char *av, int cblen);
void fill_unreach6_code(u_short *codep, char *str);
void fill_icmp6types(struct _ipfw_insn_icmp6 *cmd, char *av, int cblen);
int fill_ext6hdr(struct _ipfw_insn *cmd, char *av);
/* ipfw2.c */
void bp_flush(struct buf_pr *b);
void fill_table(struct _ipfw_insn *cmd, char *av, uint8_t opcode,
struct tidx *tstate);
/* tables.c */
struct _ipfw_obj_ctlv;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
struct _ipfw_obj_ntlv;
int table_check_name(const char *tablename);
void ipfw_list_ta(int ac, char *av[]);
Add support for multi-field values inside ipfw tables. This is the last major change in given branch. Kernel changes: * Use 64-bytes structures to hold multi-value variables. * Use shared array to hold values from all tables (assume each table algo is capable of holding 32-byte variables). * Add some placeholders to support per-table value arrays in future. * Use simple eventhandler-style API to ease the process of adding new table items. Currently table addition may required multiple UH drops/ acquires which is quite tricky due to atomic table modificatio/swap support, shared array resize, etc. Deal with it by calling special notifier capable of rolling back state before actually performing swap/resize operations. Original operation then restarts itself after acquiring UH lock. * Bump all objhash users default values to at least 64 * Fix custom hashing inside objhash. Userland changes: * Add support for dumping shared value array via "vlist" internal cmd. * Some small print/fill_flags dixes to support u32 values. * valtype is now bitmask of <skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>. New values can hold distinct values for each of this types. * Provide special "legacy" type which assumes all values are the same. * More helpers/docs following.. Some examples: 3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6 3:41 [1] zfscurr0# ipfw table mimimi info +++ table(mimimi), set(0) +++ kindex: 2, type: addr references: 0, valtype: skipto,limit,ipv4,ipv6 algorithm: addr:radix items: 0, size: 296 3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1 added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1 3:42 [1] zfscurr0# ipfw table mimimi list +++ table(mimimi), set(0) +++ 10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
2014-08-31 23:51:09 +00:00
void ipfw_list_values(int ac, char *av[]);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
void table_fill_ntlv(struct _ipfw_obj_ntlv *ntlv, const char *name,
uint8_t set, uint16_t uidx);