1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
freebsd/sys/kern/init_main.c

670 lines
18 KiB
C
Raw Normal View History

1994-05-24 10:09:53 +00:00
/*
* Copyright (c) 1995 Terrence R. Lambert
* All rights reserved.
*
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1989, 1991, 1992, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)init_main.c 8.9 (Berkeley) 1/21/94
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
#include "opt_init_path.h"
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/file.h>
1994-05-24 10:09:53 +00:00
#include <sys/filedesc.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/mount.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/systm.h>
#include <sys/signalvar.h>
1994-05-24 10:09:53 +00:00
#include <sys/vnode.h>
#include <sys/sysent.h>
1994-05-24 10:09:53 +00:00
#include <sys/reboot.h>
#include <sys/sx.h>
#include <sys/sysproto.h>
#include <sys/vmmeter.h>
#include <sys/unistd.h>
#include <sys/malloc.h>
#include <sys/conf.h>
1994-05-24 10:09:53 +00:00
#include <machine/cpu.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <sys/user.h>
#include <sys/copyright.h>
1994-05-24 10:09:53 +00:00
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
void mi_startup(void); /* Should be elsewhere */
1994-05-24 10:09:53 +00:00
/* Components of the first process -- never freed. */
static struct session session0;
static struct pgrp pgrp0;
1994-05-24 10:09:53 +00:00
struct proc proc0;
struct thread thread0;
static struct procsig procsig0;
static struct filedesc0 filedesc0;
static struct plimit limit0;
static struct vmspace vmspace0;
struct proc *initproc;
1994-05-24 10:09:53 +00:00
int cmask = CMASK;
extern int fallback_elf_brand;
1994-05-24 10:09:53 +00:00
struct vnode *rootvp;
int boothowto = 0; /* initialized so that it can be patched */
SYSCTL_INT(_debug, OID_AUTO, boothowto, CTLFLAG_RD, &boothowto, 0, "");
int bootverbose;
SYSCTL_INT(_debug, OID_AUTO, bootverbose, CTLFLAG_RW, &bootverbose, 0, "");
/*
* This ensures that there is at least one entry so that the sysinit_set
* symbol is not undefined. A sybsystem ID of SI_SUB_DUMMY is never
* executed.
*/
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
SYSINIT(placeholder, SI_SUB_DUMMY, SI_ORDER_ANY, NULL, NULL)
/*
* The sysinit table itself. Items are checked off as the are run.
* If we want to register new sysinit types, add them to newsysinit.
*/
SET_DECLARE(sysinit_set, struct sysinit);
struct sysinit **sysinit, **sysinit_end;
struct sysinit **newsysinit, **newsysinit_end;
/*
* Merge a new sysinit set into the current set, reallocating it if
* necessary. This can only be called after malloc is running.
*/
void
sysinit_add(struct sysinit **set, struct sysinit **set_end)
{
struct sysinit **newset;
struct sysinit **sipp;
struct sysinit **xipp;
int count;
count = set_end - set;
if (newsysinit)
count += newsysinit_end - newsysinit;
else
count += sysinit_end - sysinit;
newset = malloc(count * sizeof(*sipp), M_TEMP, M_NOWAIT);
if (newset == NULL)
panic("cannot malloc for sysinit");
xipp = newset;
if (newsysinit)
for (sipp = newsysinit; sipp < newsysinit_end; sipp++)
*xipp++ = *sipp;
else
for (sipp = sysinit; sipp < sysinit_end; sipp++)
*xipp++ = *sipp;
for (sipp = set; sipp < set_end; sipp++)
*xipp++ = *sipp;
if (newsysinit)
free(newsysinit, M_TEMP);
newsysinit = newset;
newsysinit_end = newset + count;
}
1994-05-24 10:09:53 +00:00
/*
* System startup; initialize the world, create process 0, mount root
* filesystem, and fork to create init and pagedaemon. Most of the
* hard work is done in the lower-level initialization routines including
* startup(), which does memory initialization and autoconfiguration.
*
* This allows simple addition of new kernel subsystems that require
* boot time initialization. It also allows substitution of subsystem
* (for instance, a scheduler, kernel profiler, or VM system) by object
* module. Finally, it allows for optional "kernel threads".
1994-05-24 10:09:53 +00:00
*/
void
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
mi_startup(void)
1994-05-24 10:09:53 +00:00
{
register struct sysinit **sipp; /* system initialization*/
register struct sysinit **xipp; /* interior loop of sort*/
register struct sysinit *save; /* bubble*/
if (sysinit == NULL) {
sysinit = SET_BEGIN(sysinit_set);
sysinit_end = SET_LIMIT(sysinit_set);
}
restart:
/*
* Perform a bubble sort of the system initialization objects by
* their subsystem (primary key) and order (secondary key).
*/
for (sipp = sysinit; sipp < sysinit_end; sipp++) {
for (xipp = sipp + 1; xipp < sysinit_end; xipp++) {
if ((*sipp)->subsystem < (*xipp)->subsystem ||
((*sipp)->subsystem == (*xipp)->subsystem &&
(*sipp)->order <= (*xipp)->order))
continue; /* skip*/
save = *sipp;
*sipp = *xipp;
*xipp = save;
}
}
/*
* Traverse the (now) ordered list of system initialization tasks.
* Perform each task, and continue on to the next task.
*
* The last item on the list is expected to be the scheduler,
* which will not return.
*/
for (sipp = sysinit; sipp < sysinit_end; sipp++) {
if ((*sipp)->subsystem == SI_SUB_DUMMY)
continue; /* skip dummy task(s)*/
if ((*sipp)->subsystem == SI_SUB_DONE)
continue;
/* Call function */
(*((*sipp)->func))((*sipp)->udata);
/* Check off the one we're just done */
(*sipp)->subsystem = SI_SUB_DONE;
/* Check if we've installed more sysinit items via KLD */
if (newsysinit != NULL) {
if (sysinit != SET_BEGIN(sysinit_set))
free(sysinit, M_TEMP);
sysinit = newsysinit;
sysinit_end = newsysinit_end;
newsysinit = NULL;
newsysinit_end = NULL;
goto restart;
}
}
panic("Shouldn't get here!");
/* NOTREACHED*/
}
/*
***************************************************************************
****
**** The following SYSINIT's belong elsewhere, but have not yet
**** been moved.
****
***************************************************************************
*/
static void
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
print_caddr_t(void *data __unused)
{
printf("%s", (char *)data);
}
SYSINIT(announce, SI_SUB_COPYRIGHT, SI_ORDER_FIRST, print_caddr_t, copyright)
SYSINIT(version, SI_SUB_COPYRIGHT, SI_ORDER_SECOND, print_caddr_t, version)
static void
set_boot_verbose(void *data __unused)
{
if (boothowto & RB_VERBOSE)
bootverbose++;
}
SYSINIT(boot_verbose, SI_SUB_TUNABLES, SI_ORDER_ANY, set_boot_verbose, NULL)
/*
***************************************************************************
****
**** The two following SYSINT's are proc0 specific glue code. I am not
**** convinced that they can not be safely combined, but their order of
**** operation has been maintained as the same as the original init_main.c
**** for right now.
****
**** These probably belong in init_proc.c or kern_proc.c, since they
**** deal with proc0 (the fork template process).
****
***************************************************************************
*/
/* ARGSUSED*/
static void
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
proc0_init(void *dummy __unused)
{
register struct proc *p;
register struct filedesc0 *fdp;
register unsigned i;
struct thread *td;
struct ksegrp *kg;
struct kse *ke;
1994-05-24 10:09:53 +00:00
GIANT_REQUIRED;
1994-05-24 10:09:53 +00:00
p = &proc0;
td = &thread0;
1994-05-24 10:09:53 +00:00
/*
* Initialize magic number.
*/
p->p_magic = P_MAGIC;
/*
* Initialize thread, process and pgrp structures.
*/
procinit();
/*
* Initialize sleep queue hash table
*/
sleepinit();
/*
* additional VM structures
*/
vm_init2();
1994-05-24 10:09:53 +00:00
/*
* Create process 0 (the swapper).
*/
LIST_INSERT_HEAD(&allproc, p, p_list);
2001-04-11 18:50:50 +00:00
LIST_INSERT_HEAD(PIDHASH(0), p, p_hash);
mtx_init(&pgrp0.pg_mtx, "process group", NULL, MTX_DEF | MTX_DUPOK);
1994-05-24 10:09:53 +00:00
p->p_pgrp = &pgrp0;
LIST_INSERT_HEAD(PGRPHASH(0), &pgrp0, pg_hash);
LIST_INIT(&pgrp0.pg_members);
LIST_INSERT_HEAD(&pgrp0.pg_members, p, p_pglist);
1994-05-24 10:09:53 +00:00
pgrp0.pg_session = &session0;
mtx_init(&session0.s_mtx, "session", NULL, MTX_DEF);
1994-05-24 10:09:53 +00:00
session0.s_count = 1;
session0.s_leader = p;
#ifdef __ELF__
p->p_sysent = &elf_freebsd_sysvec;
#else
p->p_sysent = &aout_sysvec;
#endif
ke = &proc0.p_kse; /* XXXKSE */
kg = &proc0.p_ksegrp; /* XXXKSE */
p->p_flag = P_SYSTEM;
p->p_sflag = PS_INMEM;
1994-05-24 10:09:53 +00:00
p->p_stat = SRUN;
p->p_ksegrp.kg_nice = NZERO;
kg->kg_pri_class = PRI_TIMESHARE;
kg->kg_user_pri = PUSER;
td->td_priority = PVM;
td->td_base_pri = PUSER;
p->p_peers = 0;
p->p_leader = p;
1994-05-24 10:09:53 +00:00
bcopy("swapper", p->p_comm, sizeof ("swapper"));
callout_init(&p->p_itcallout, 0);
callout_init(&td->td_slpcallout, 1);
1994-05-24 10:09:53 +00:00
/* Create credentials. */
p->p_ucred = crget();
p->p_ucred->cr_ngroups = 1; /* group 0 */
p->p_ucred->cr_uidinfo = uifind(0);
o Merge contents of struct pcred into struct ucred. Specifically, add the real uid, saved uid, real gid, and saved gid to ucred, as well as the pcred->pc_uidinfo, which was associated with the real uid, only rename it to cr_ruidinfo so as not to conflict with cr_uidinfo, which corresponds to the effective uid. o Remove p_cred from struct proc; add p_ucred to struct proc, replacing original macro that pointed. p->p_ucred to p->p_cred->pc_ucred. o Universally update code so that it makes use of ucred instead of pcred, p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo, cr_{r,sv}{u,g}id instead of p_*, etc. o Remove pcred0 and its initialization from init_main.c; initialize cr_ruidinfo there. o Restruction many credential modification chunks to always crdup while we figure out locking and optimizations; generally speaking, this means moving to a structure like this: newcred = crdup(oldcred); ... p->p_ucred = newcred; crfree(oldcred); It's not race-free, but better than nothing. There are also races in sys_process.c, all inter-process authorization, fork, exec, and exit. o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid; remove comments indicating that the old arrangement was a problem. o Restructure exec1() a little to use newcred/oldcred arrangement, and use improved uid management primitives. o Clean up exit1() so as to do less work in credential cleanup due to pcred removal. o Clean up fork1() so as to do less work in credential cleanup and allocation. o Clean up ktrcanset() to take into account changes, and move to using suser_xxx() instead of performing a direct uid==0 comparision. o Improve commenting in various kern_prot.c credential modification calls to better document current behavior. In a couple of places, current behavior is a little questionable and we need to check POSIX.1 to make sure it's "right". More commenting work still remains to be done. o Update credential management calls, such as crfree(), to take into account new ruidinfo reference. o Modify or add the following uid and gid helper routines: change_euid() change_egid() change_ruid() change_rgid() change_svuid() change_svgid() In each case, the call now acts on a credential not a process, and as such no longer requires more complicated process locking/etc. They now assume the caller will do any necessary allocation of an exclusive credential reference. Each is commented to document its reference requirements. o CANSIGIO() is simplified to require only credentials, not processes and pcreds. o Remove lots of (p_pcred==NULL) checks. o Add an XXX to authorization code in nfs_lock.c, since it's questionable, and needs to be considered carefully. o Simplify posix4 authorization code to require only credentials, not processes and pcreds. Note that this authorization, as well as CANSIGIO(), needs to be updated to use the p_cansignal() and p_cansched() centralized authorization routines, as they currently do not take into account some desirable restrictions that are handled by the centralized routines, as well as being inconsistent with other similar authorization instances. o Update libkvm to take these changes into account. Obtained from: TrustedBSD Project Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
p->p_ucred->cr_ruidinfo = uifind(0);
p->p_ucred->cr_prison = NULL; /* Don't jail it. */
td->td_ucred = crhold(p->p_ucred);
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
/* Create procsig. */
p->p_procsig = &procsig0;
p->p_procsig->ps_refcnt = 1;
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
/* Initialize signal state for process 0. */
siginit(&proc0);
1994-05-24 10:09:53 +00:00
/* Create the file descriptor table. */
fdp = &filedesc0;
p->p_fd = &fdp->fd_fd;
mtx_init(&fdp->fd_fd.fd_mtx, FILEDESC_LOCK_DESC, NULL, MTX_DEF);
1994-05-24 10:09:53 +00:00
fdp->fd_fd.fd_refcnt = 1;
fdp->fd_fd.fd_cmask = cmask;
fdp->fd_fd.fd_ofiles = fdp->fd_dfiles;
fdp->fd_fd.fd_ofileflags = fdp->fd_dfileflags;
fdp->fd_fd.fd_nfiles = NDFILE;
/* Create the limits structures. */
p->p_limit = &limit0;
for (i = 0; i < sizeof(p->p_rlimit)/sizeof(p->p_rlimit[0]); i++)
limit0.pl_rlimit[i].rlim_cur =
limit0.pl_rlimit[i].rlim_max = RLIM_INFINITY;
limit0.pl_rlimit[RLIMIT_NOFILE].rlim_cur =
limit0.pl_rlimit[RLIMIT_NOFILE].rlim_max = maxfiles;
limit0.pl_rlimit[RLIMIT_NPROC].rlim_cur =
limit0.pl_rlimit[RLIMIT_NPROC].rlim_max = maxproc;
1994-05-24 10:09:53 +00:00
i = ptoa(cnt.v_free_count);
limit0.pl_rlimit[RLIMIT_RSS].rlim_max = i;
limit0.pl_rlimit[RLIMIT_MEMLOCK].rlim_max = i;
limit0.pl_rlimit[RLIMIT_MEMLOCK].rlim_cur = i / 3;
limit0.p_cpulimit = RLIM_INFINITY;
1994-05-24 10:09:53 +00:00
limit0.p_refcnt = 1;
/* Allocate a prototype map so we have something to fork. */
pmap_pinit0(vmspace_pmap(&vmspace0));
1994-05-24 10:09:53 +00:00
p->p_vmspace = &vmspace0;
vmspace0.vm_refcnt = 1;
vm_map_init(&vmspace0.vm_map, round_page(VM_MIN_ADDRESS),
VM level code cleanups. 1) Start using TSM. Struct procs continue to point to upages structure, after being freed. Struct vmspace continues to point to pte object and kva space for kstack. u_map is now superfluous. 2) vm_map's don't need to be reference counted. They always exist either in the kernel or in a vmspace. The vmspaces are managed by reference counts. 3) Remove the "wired" vm_map nonsense. 4) No need to keep a cache of kernel stack kva's. 5) Get rid of strange looking ++var, and change to var++. 6) Change more data structures to use our "zone" allocator. Added struct proc, struct vmspace and struct vnode. This saves a significant amount of kva space and physical memory. Additionally, this enables TSM for the zone managed memory. 7) Keep ioopt disabled for now. 8) Remove the now bogus "single use" map concept. 9) Use generation counts or id's for data structures residing in TSM, where it allows us to avoid unneeded restart overhead during traversals, where blocking might occur. 10) Account better for memory deficits, so the pageout daemon will be able to make enough memory available (experimental.) 11) Fix some vnode locking problems. (From Tor, I think.) 12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp. (experimental.) 13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c code. Use generation counts, get rid of unneded collpase operations, and clean up the cluster code. 14) Make vm_zone more suitable for TSM. This commit is partially as a result of discussions and contributions from other people, including DG, Tor Egge, PHK, and probably others that I have forgotten to attribute (so let me know, if I forgot.) This is not the infamous, final cleanup of the vnode stuff, but a necessary step. Vnode mgmt should be correct, but things might still change, and there is still some missing stuff (like ioopt, and physical backing of non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
trunc_page(VM_MAXUSER_ADDRESS));
vmspace0.vm_map.pmap = vmspace_pmap(&vmspace0);
1994-05-24 10:09:53 +00:00
/*
1994-05-24 10:09:53 +00:00
* We continue to place resource usage info and signal
* actions in the user struct so they're pageable.
*/
p->p_stats = &p->p_uarea->u_stats;
p->p_sigacts = &p->p_uarea->u_sigacts;
1994-05-24 10:09:53 +00:00
/*
* Charge root for one process.
1994-05-24 10:09:53 +00:00
*/
o Merge contents of struct pcred into struct ucred. Specifically, add the real uid, saved uid, real gid, and saved gid to ucred, as well as the pcred->pc_uidinfo, which was associated with the real uid, only rename it to cr_ruidinfo so as not to conflict with cr_uidinfo, which corresponds to the effective uid. o Remove p_cred from struct proc; add p_ucred to struct proc, replacing original macro that pointed. p->p_ucred to p->p_cred->pc_ucred. o Universally update code so that it makes use of ucred instead of pcred, p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo, cr_{r,sv}{u,g}id instead of p_*, etc. o Remove pcred0 and its initialization from init_main.c; initialize cr_ruidinfo there. o Restruction many credential modification chunks to always crdup while we figure out locking and optimizations; generally speaking, this means moving to a structure like this: newcred = crdup(oldcred); ... p->p_ucred = newcred; crfree(oldcred); It's not race-free, but better than nothing. There are also races in sys_process.c, all inter-process authorization, fork, exec, and exit. o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid; remove comments indicating that the old arrangement was a problem. o Restructure exec1() a little to use newcred/oldcred arrangement, and use improved uid management primitives. o Clean up exit1() so as to do less work in credential cleanup due to pcred removal. o Clean up fork1() so as to do less work in credential cleanup and allocation. o Clean up ktrcanset() to take into account changes, and move to using suser_xxx() instead of performing a direct uid==0 comparision. o Improve commenting in various kern_prot.c credential modification calls to better document current behavior. In a couple of places, current behavior is a little questionable and we need to check POSIX.1 to make sure it's "right". More commenting work still remains to be done. o Update credential management calls, such as crfree(), to take into account new ruidinfo reference. o Modify or add the following uid and gid helper routines: change_euid() change_egid() change_ruid() change_rgid() change_svuid() change_svgid() In each case, the call now acts on a credential not a process, and as such no longer requires more complicated process locking/etc. They now assume the caller will do any necessary allocation of an exclusive credential reference. Each is commented to document its reference requirements. o CANSIGIO() is simplified to require only credentials, not processes and pcreds. o Remove lots of (p_pcred==NULL) checks. o Add an XXX to authorization code in nfs_lock.c, since it's questionable, and needs to be considered carefully. o Simplify posix4 authorization code to require only credentials, not processes and pcreds. Note that this authorization, as well as CANSIGIO(), needs to be updated to use the p_cansignal() and p_cansched() centralized authorization routines, as they currently do not take into account some desirable restrictions that are handled by the centralized routines, as well as being inconsistent with other similar authorization instances. o Update libkvm to take these changes into account. Obtained from: TrustedBSD Project Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
(void)chgproccnt(p->p_ucred->cr_ruidinfo, 1, 0);
}
SYSINIT(p0init, SI_SUB_INTRINSIC, SI_ORDER_FIRST, proc0_init, NULL)
1994-05-24 10:09:53 +00:00
/* ARGSUSED*/
static void
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
proc0_post(void *dummy __unused)
{
struct timespec ts;
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
struct proc *p;
/*
* Now we can look at the time, having had a chance to verify the
2002-05-16 21:28:32 +00:00
* time from the filesystem. Pretend that proc0 started now.
*/
sx_slock(&allproc_lock);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
LIST_FOREACH(p, &allproc, p_list) {
microtime(&p->p_stats->p_start);
p->p_runtime.sec = 0;
p->p_runtime.frac = 0;
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
}
sx_sunlock(&allproc_lock);
binuptime(PCPU_PTR(switchtime));
PCPU_SET(switchticks, ticks);
/*
* Give the ``random'' number generator a thump.
*/
nanotime(&ts);
srandom(ts.tv_sec ^ ts.tv_nsec);
}
SYSINIT(p0post, SI_SUB_INTRINSIC_POST, SI_ORDER_FIRST, proc0_post, NULL)
1994-05-24 10:09:53 +00:00
/*
***************************************************************************
****
**** The following SYSINIT's and glue code should be moved to the
**** respective files on a per subsystem basis.
****
***************************************************************************
*/
1994-05-24 10:09:53 +00:00
/*
***************************************************************************
****
**** The following code probably belongs in another file, like
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
**** kern/init_init.c.
****
***************************************************************************
*/
1994-05-24 10:09:53 +00:00
/*
* List of paths to try when searching for "init".
*/
static char init_path[MAXPATHLEN] =
#ifdef INIT_PATH
__XSTRING(INIT_PATH);
#else
"/sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall";
#endif
SYSCTL_STRING(_kern, OID_AUTO, init_path, CTLFLAG_RD, init_path, 0,
"Path used to search the init process");
1994-05-24 10:09:53 +00:00
/*
* Start the initial user process; try exec'ing each pathname in init_path.
1994-05-24 10:09:53 +00:00
* The program is invoked with one argument containing the boot flags.
*/
static void
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
start_init(void *dummy)
1994-05-24 10:09:53 +00:00
{
vm_offset_t addr;
struct execve_args args;
int options, error;
char *var, *path, *next, *s;
char *ucp, **uap, *arg0, *arg1;
struct thread *td;
struct proc *p;
int init_does_devfs = 0;
1994-05-24 10:09:53 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&Giant);
GIANT_REQUIRED;
td = curthread;
p = td->td_proc;
1994-05-24 10:09:53 +00:00
vfs_mountroot(NULL);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
/* Get the vnode for '/'. Set p->p_fd->fd_cdir to reference it. */
if (VFS_ROOT(TAILQ_FIRST(&mountlist), &rootvnode))
panic("cannot find root vnode");
FILEDESC_LOCK(p->p_fd);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
p->p_fd->fd_cdir = rootvnode;
VREF(p->p_fd->fd_cdir);
p->p_fd->fd_rdir = rootvnode;
VREF(p->p_fd->fd_rdir);
FILEDESC_UNLOCK(p->p_fd);
VOP_UNLOCK(rootvnode, 0, td);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
if (devfs_present) {
/*
* For disk based systems, we probably cannot do this yet
* since the fs will be read-only. But a NFS root
* might be ok. It is worth a shot.
*/
error = vn_mkdir("/dev", 0700, UIO_SYSSPACE, td);
if (error == EEXIST)
error = 0;
if (error == 0)
error = kernel_vmount(0, "fstype", "devfs",
"fspath", "/dev", NULL);
if (error != 0)
init_does_devfs = 1;
}
1994-05-24 10:09:53 +00:00
/*
* Need just enough stack to hold the faked-up "execve()" arguments.
*/
addr = trunc_page(USRSTACK - PAGE_SIZE);
if (vm_map_find(&p->p_vmspace->vm_map, NULL, 0, &addr, PAGE_SIZE,
FALSE, VM_PROT_ALL, VM_PROT_ALL, 0) != 0)
1994-05-24 10:09:53 +00:00
panic("init: couldn't allocate argument space");
p->p_vmspace->vm_maxsaddr = (caddr_t)addr;
p->p_vmspace->vm_ssize = 1;
1994-05-24 10:09:53 +00:00
if ((var = getenv("init_path")) != NULL) {
1999-05-07 17:37:08 +00:00
strncpy(init_path, var, sizeof init_path);
init_path[sizeof init_path - 1] = 0;
freeenv(var);
}
if ((var = getenv("kern.fallback_elf_brand")) != NULL) {
fallback_elf_brand = strtol(var, NULL, 0);
freeenv(var);
}
for (path = init_path; *path != '\0'; path = next) {
while (*path == ':')
path++;
if (*path == '\0')
break;
for (next = path; *next != '\0' && *next != ':'; next++)
/* nothing */ ;
if (bootverbose)
1999-04-24 18:50:48 +00:00
printf("start_init: trying %.*s\n", (int)(next - path),
path);
1994-05-24 10:09:53 +00:00
/*
* Move out the boot flag argument.
*/
options = 0;
ucp = (char *)USRSTACK;
(void)subyte(--ucp, 0); /* trailing zero */
if (boothowto & RB_SINGLE) {
(void)subyte(--ucp, 's');
options = 1;
}
#ifdef notyet
if (boothowto & RB_FASTBOOT) {
(void)subyte(--ucp, 'f');
options = 1;
}
#endif
#ifdef BOOTCDROM
(void)subyte(--ucp, 'C');
options = 1;
#endif
if (init_does_devfs) {
(void)subyte(--ucp, 'd');
options = 1;
}
1994-05-24 10:09:53 +00:00
if (options == 0)
(void)subyte(--ucp, '-');
(void)subyte(--ucp, '-'); /* leading hyphen */
arg1 = ucp;
/*
* Move out the file name (also arg 0).
*/
(void)subyte(--ucp, 0);
for (s = next - 1; s >= path; s--)
(void)subyte(--ucp, *s);
1994-05-24 10:09:53 +00:00
arg0 = ucp;
/*
* Move out the arg pointers.
*/
uap = (char **)((intptr_t)ucp & ~(sizeof(intptr_t)-1));
(void)suword((caddr_t)--uap, (long)0); /* terminator */
(void)suword((caddr_t)--uap, (long)(intptr_t)arg1);
(void)suword((caddr_t)--uap, (long)(intptr_t)arg0);
1994-05-24 10:09:53 +00:00
/*
* Point at the arguments.
*/
args.fname = arg0;
args.argv = uap;
args.envv = NULL;
1994-05-24 10:09:53 +00:00
/*
* Now try to exec the program. If can't for any reason
* other than it doesn't exist, complain.
*
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
* Otherwise, return via fork_trampoline() all the way
* to user mode as init!
1994-05-24 10:09:53 +00:00
*/
if ((error = execve(td, &args)) == 0) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&Giant);
1994-05-24 10:09:53 +00:00
return;
}
1994-05-24 10:09:53 +00:00
if (error != ENOENT)
1999-04-24 18:50:48 +00:00
printf("exec %.*s: error %d\n", (int)(next - path),
path, error);
1994-05-24 10:09:53 +00:00
}
printf("init: not found in path %s\n", init_path);
1994-05-24 10:09:53 +00:00
panic("no init");
}
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
/*
* Like kthread_create(), but runs in it's own address space.
* We do this early to reserve pid 1.
*
* Note special case - do not make it runnable yet. Other work
* in progress will change this more.
*/
static void
create_init(const void *udata __unused)
{
struct ucred *newcred, *oldcred;
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
int error;
error = fork1(&thread0, RFFDG | RFPROC | RFSTOPPED, &initproc);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
if (error)
panic("cannot fork init: %d\n", error);
/* divorce init's credentials from the kernel's */
newcred = crget();
PROC_LOCK(initproc);
initproc->p_flag |= P_SYSTEM;
oldcred = initproc->p_ucred;
crcopy(newcred, oldcred);
initproc->p_ucred = newcred;
PROC_UNLOCK(initproc);
crfree(oldcred);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
initproc->p_sflag |= PS_INMEM;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
cpu_set_fork_handler(FIRST_THREAD_IN_PROC(initproc), start_init, NULL);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
}
SYSINIT(init, SI_SUB_CREATE_INIT, SI_ORDER_FIRST, create_init, NULL)
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
/*
* Make it runnable now.
*/
static void
kick_init(const void *udata __unused)
{
struct thread *td;
td = FIRST_THREAD_IN_PROC(initproc);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
initproc->p_stat = SRUN;
setrunqueue(FIRST_THREAD_IN_PROC(initproc)); /* XXXKSE */
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
Clean up some low level bootstrap code: - stop using the evil 'struct trapframe' argument for mi_startup() (formerly main()). There are much better ways of doing it. - do not use prepare_usermode() - setregs() in execve() will do it all for us as long as the p_md.md_regs pointer is set. (which is now done in machdep.c rather than init_main.c. The Alpha port did it this way all along and is much cleaner). - collect all the magic %cr0 etc register settings into one place and have the AP's call that instead of using magic numbers (!!) that keep changing over and over again. - Make it safe to call kthread_create() earlier, including during the device probe sequence. It doesn't need the callback mechanism that NetBSD's version uses. - kthreads created this way are root-less as they exist before the root filesystem is mounted. init(1) is set up so that it aquires the root pointers prior to running. If other kthreads want filesystem acccess we can make this code more generic. - set all threads start times once we have decided what time it is. - init uses a trampoline rather than the evil prepare_usermode() hack. - kern_descrip.c has a couple of tweaks to deal with forking when there is no rootdir or cwd etc. - adjust the early SYSINIT() sequence so that a few prereqisites are in place. eg: make sure the run queue is initialized before doing forks. With this, the USB code can easily create a kthread to do the device tree discovery. (I have tested it, it works nicely). There are still some open issues before this is truely useful. - tsleep() does not like working before the clock is running. It sort-of tries to spin wait, but it can do more useful things now. - stopping a kthread in kld code at unload time is "interesting" but we have a solution for that. The Alpha code needs no changes for this. It already uses pretty much the same strategies, but a little cleaner.
2000-08-11 09:05:12 +00:00
}
SYSINIT(kickinit, SI_SUB_KTHREAD_INIT, SI_ORDER_FIRST, kick_init, NULL)