mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
0e1497aefd
freebsd/sys/arm/at91/at91_piovar.h

45 lines
2.2 KiB
C
Raw Normal View History

Add support for configuring pins to be one of {GPIO, PERIPHERAL A or PERIPHERAL B}, as well as direction of GPIO pin. Add defines for all the pins.
2006-07-02 03:50:44 +00:00
/*-
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
Tweak the disclaimer section of the license to match COPYRIGHT, for better or worse. Ok'd by folks that have additional copyrights to the files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Add support for configuring pins to be one of {GPIO, PERIPHERAL A or PERIPHERAL B}, as well as direction of GPIO pin. Add defines for all the pins.
2006-07-02 03:50:44 +00:00
*/
/* $FreeBSD$ */
#ifndef ARM_AT91_AT91_PIOVAR_H
#define ARM_AT91_AT91_PIOVAR_H
MFp4: Introduce framework to configure the multiplexed pins on boot. Since the USART supprots RS-485 multidrop mode, it allows the TX pins to float. However, for RS-232 operations, we don't want these pins to float. Instead, they should be pulled up to avoid mismatches. Linux does something similar when it configures the TX lines. This implies that we also allow the RX lines to float rather than be in the state they are left in by the boot loader. Since they are input pins, I think that this is the right thing to do. Plus minor for our board.
2006-07-14 22:22:57 +00:00
void at91_pio_use_periph_a(uint32_t pio, uint32_t periph_a_mask, int use_pullup);
void at91_pio_use_periph_b(uint32_t pio, uint32_t periph_b_mask, int use_pullup);
Add support for configuring pins to be one of {GPIO, PERIPHERAL A or PERIPHERAL B}, as well as direction of GPIO pin. Add defines for all the pins.
2006-07-02 03:50:44 +00:00
void at91_pio_use_gpio(uint32_t pio, uint32_t gpio_mask);
void at91_pio_gpio_input(uint32_t pio, uint32_t input_enable_mask);
MFp4: Introduce framework to configure the multiplexed pins on boot. Since the USART supprots RS-485 multidrop mode, it allows the TX pins to float. However, for RS-232 operations, we don't want these pins to float. Instead, they should be pulled up to avoid mismatches. Linux does something similar when it configures the TX lines. This implies that we also allow the RX lines to float rather than be in the state they are left in by the boot loader. Since they are input pins, I think that this is the right thing to do. Plus minor for our board.
2006-07-14 22:22:57 +00:00
void at91_pio_gpio_output(uint32_t pio, uint32_t output_enable_mask,
int use_pullup);
Add support for configuring pins to be one of {GPIO, PERIPHERAL A or PERIPHERAL B}, as well as direction of GPIO pin. Add defines for all the pins.
2006-07-02 03:50:44 +00:00
void at91_pio_gpio_set(uint32_t pio, uint32_t data_mask);
void at91_pio_gpio_clear(uint32_t pio, uint32_t data_mask);
Provide hooks into the GPIO lines and the ability to set/clear interrupts from them. This should be more generalized, but is sufficient for now. Submitted by: Hans Petter Selasky
2008-08-19 22:17:14 +00:00
uint8_t at91_pio_gpio_get(uint32_t pio, uint32_t data_mask);
void at91_pio_gpio_set_deglitch(uint32_t pio, uint32_t data_mask, int use_deglitch);
void at91_pio_gpio_set_interrupt(uint32_t pio, uint32_t data_mask, int enable_interrupt);
uint32_t at91_pio_gpio_clear_interrupt(uint32_t pio);
Add support for configuring pins to be one of {GPIO, PERIPHERAL A or PERIPHERAL B}, as well as direction of GPIO pin. Add defines for all the pins.
2006-07-02 03:50:44 +00:00
#endif /* ARM_AT91_AT91_PIOVAR_H */
Reference in New Issue Copy Permalink