1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/Makefile.inc1

807 lines
25 KiB
Makefile
Raw Normal View History

#
1999-08-28 01:35:59 +00:00
# $FreeBSD$
#
# Make command line options:
# -DMAKE_KERBEROS4 to build KerberosIV
# -DMAKE_KERBEROS5 to build Kerberos5
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOCRYPT will prevent building of crypt versions
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
1999-05-03 17:54:59 +00:00
# -DNO_FORTRAN do not build g77 and related libraries.
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
# MACHINE_ARCH="machine arch" to crossbuild world to a different arch
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(${.CURDIR}/share/info)
SUBDIR+= share/info
.endif
# We must do include and lib early so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(${.CURDIR}/include)
SUBDIR+= include
.endif
.if exists(${.CURDIR}/lib)
SUBDIR+= lib
.endif
.if exists(${.CURDIR}/bin)
SUBDIR+= bin
.endif
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(${.CURDIR}/gnu)
SUBDIR+= gnu
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
SUBDIR+= kerberos5
.endif
.if exists(${.CURDIR}/libexec)
SUBDIR+= libexec
.endif
.if exists(${.CURDIR}/sbin)
SUBDIR+= sbin
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(${.CURDIR}/sys)
SUBDIR+= sys
.endif
.if exists(${.CURDIR}/usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(${.CURDIR}/usr.sbin)
SUBDIR+= usr.sbin
.endif
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
# etc must be last for "distribute" to work
.if exists(${.CURDIR}/etc)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
.if defined(NOCLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
SUP?= cvsup
SUPFLAGS?= -g -L 2 -P -
.if defined(SUPHOST)
SUPFLAGS+= -h ${SUPHOST}
.endif
MAKEOBJDIRPREFIX?= /usr/obj
TARGET_ARCH?= ${MACHINE_ARCH}
BUILD_ARCH!= sysctl -n hw.machine_arch
.if ${BUILD_ARCH} == ${MACHINE_ARCH}
OBJTREE= ${MAKEOBJDIRPREFIX}
.else
OBJTREE= ${MAKEOBJDIRPREFIX}/${MACHINE_ARCH}
.endif
WORLDTMP= ${OBJTREE}${.CURDIR}/${BUILD_ARCH}
# /usr/games added for fortune which depend on strfile
STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
TMPPATH= ${STRICTTMPPATH}:${PATH}
OBJFORMAT_PATH?= /usr/libexec
TMPDIR?= /tmp
TMPPID!= echo $$$$
INSTALLTMP= ${TMPDIR}/install.${TMPPID}
#
# Building a world goes through the following stages
#
# 1. bootstrap-tool stage [BMAKE]
# This stage is responsible for creating programs that
# are needed for backward compatibility reasons. They
# are not built as cross-tools.
# 2. build-tool stage [TMAKE]
# This stage is responsible for creating the object
# tree and building any tools that are needed during
# the build process.
# 3. cross-tool stage [XMAKE]
# This stage is responsible for creating any tools that
# are needed for cross-builds. A cross-compiler is one
# of them.
# 4. world stage [WMAKE]
# This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
# This stage installs a previously built world.
#
# Common environment for bootstrap related stages
BOOTSTRAPENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
MACHINE_ARCH=${BUILD_ARCH} \
TOOLS_PREFIX=${WORLDTMP} \
PATH=${TMPPATH}
# Common environment for world related stages
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
2000-07-02 16:15:03 +00:00
PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0
# bootstrap-tool stage
BMAKEENV= ${BOOTSTRAPENV}
BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DNOHTML -DNOINFO \
-DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
# build-tool stage
TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1
# cross-tool stage
XMAKEENV= ${BOOTSTRAPENV} \
TARGET_ARCH=${MACHINE_ARCH}
XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
-DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE \
-DNOSHARED
# world stage
WMAKEENV= ${CROSSENV} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
# install stage
IMAKEENV= ${CROSSENV} \
PATH=${STRICTTMPPATH}:${INSTALLTMP}
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
# kernel stage
KMAKEENV= ${WMAKEENV} \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc
INCDIRS= arpa g++/std objc protocols readline rpc rpcsvc openssl \
security ss
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
buildworld:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding the temporary build tree"
@echo "--------------------------------------------------------------"
.if !defined(NOCLEAN)
rm -rf ${WORLDTMP}
.else
for dir in bin games include lib sbin; do \
rm -rf ${WORLDTMP}/usr/$$dir; \
done
# XXX - Work-around for broken cc/cc_tools/Makefile.
# This is beyond dirty...
rm -f ${OBJTREE}${.CURDIR}/gnu/usr.bin/cc/cc_tools/.depend
.endif
.for _dir in ${USRDIRS}
mkdir -p ${WORLDTMP}/${_dir}
.endfor
.for _dir in ${INCDIRS}
mkdir -p ${WORLDTMP}/usr/include/${_dir}
.endfor
ln -sf ${.CURDIR}/sys ${WORLDTMP}
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1: bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap-tools
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: cleaning up the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} ${CLEANDIR:S/^/par-/}
Backed out rev.1.49. It broke bootstrapping from 2.1.5 2.2.7 and probably other versions by spamming ${DESTDIR}/usr/include in much the same way as `make includes'. Details for 2.2.7: the bootstrap target has always done a weak spam of ${DESTDIR}/usr/include; we depend on it not installing any significant anachronisms (it probably shouldn't touch the headers at all; however, we may be depending on it for things like the renaming of ts_nsec to ts_sec in <sys/time.h>). Rev.1.49 strengthens the spam to everything in src/include. For 2.2.7, this is not immediately fatal. However, the `make all' step in src/includes is not followed by a `make clean' step, so new rpc headers are not generated after we've bootstrapped rpcgen. This causes a fatal error much later when the old (generated) rpc headers are used with the current headers (sys/types.h and/or the non-generated rpc headers). Details for 2.1.x: the bug is immediately fatal. It gives definition of errno that is not supported by 2.1.x's libc. The weak spam in the restored version avoids this problem by not installing errno.h. (Bootstrapping from 2.1.5 actually breaks much earlier.) I think the header problems supposedly fixed by rev.1.49 were caused by using NOCLEAN and having the build fall over when the weakly spammed headers are active. Minor differences in the layout will then cause the .depend files to point to nonexistent headers. It is a feature for symlinks like errno.h -> sys/errno.h to not exist early. The other change in rev.1.49 breaks building obj directories if NOCLEAN is set. It is only safe for _re_building with NOCLEAN set.
1999-01-04 12:05:59 +00:00
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} par-obj
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: build tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} build-tools
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3: cross tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} cross-tools
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} SHARED=symlinks includes
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: make dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-depend
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
everything:
@echo "--------------------------------------------------------------"
@echo ">>> Building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
installworld:
mkdir -p ${INSTALLTMP}
for prog in [ awk cat chflags chmod chown date echo egrep find grep \
install ln make makewhatis mtree mv perl rm sed sh sysctl \
test true uname wc zic; do \
cp `which $$prog` ${INSTALLTMP}; \
done
cd ${.CURDIR}; ${IMAKE} reinstall
rm -rf ${INSTALLTMP}
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo ">>> Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if !defined(NOMAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding man page indices"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man; ${MAKE} makedb
.endif
#
# distribworld
#
# Front-end to distribute to make sure the search path contains
# the object directory. Needed for miniperl.
#
distribworld:
cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending MACHINE) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use MACHINE instead of MACHINE_ARCH when
# we're in kernel-land. Since only MACHINE_ARCH is (expected) to
# be set to cross-build, we have to make sure MACHINE is set
# properly.
.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF= ${KERNEL}
KERNWARN= yes
.else
KERNCONF?= GENERIC
.endif
INSTKERNNAME?= kernel
# The only exotic MACHINE_ARCH/MACHINE combination valid at this
# time is i386/pc98. In all other cases set MACHINE equal to
# MACHINE_ARCH.
.if ${MACHINE_ARCH} != "i386" || ${MACHINE} != "pc98"
MACHINE= ${MACHINE_ARCH}
.endif
KRNLSRCDIR= ${.CURDIR}/sys
KRNLCONFDIR= ${KRNLSRCDIR}/${MACHINE}/conf
KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KRNLCONFDIR}/${_kernel})
BUILDKERNELS+= ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor
#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
.if empty(BUILDKERNELS)
@echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
@false
.endif
.if defined(KERNWARN)
@echo "--------------------------------------------------------------"
@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
@echo "--------------------------------------------------------------"
@sleep 3
.endif
@echo
.for _kernel in ${BUILDKERNELS}
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
@echo "===> ${_kernel}"
mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
cd ${KRNLCONFDIR}; \
PATH=${TMPPATH} \
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} ${_kernel}
.endif
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} clean
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
.if !defined(NO_KERNELDEPEND)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} depend
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} all
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
.endfor
#
# installkernel
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel:
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} install
reinstallkernel:
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
#
# kernel
#
# Short hand for `make buildkernel installkernel'
#
kernel: buildkernel installkernel
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Running ${SUP}"
@echo "--------------------------------------------------------------"
.if defined(SUPFILE)
@${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
1999-06-01 02:55:44 +00:00
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; cvs -q update -A -P -d
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo ">>> Building programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} all
cd ${.CURDIR}/sbin; ${MAKE} all
cd ${.CURDIR}/libexec; ${MAKE} all
cd ${.CURDIR}/usr.bin; ${MAKE} all
cd ${.CURDIR}/usr.sbin; ${MAKE} all
cd ${.CURDIR}/gnu/libexec; ${MAKE} all
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo ">>> Installing programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} install
cd ${.CURDIR}/sbin; ${MAKE} install
cd ${.CURDIR}/libexec; ${MAKE} install
cd ${.CURDIR}/usr.bin; ${MAKE} install
cd ${.CURDIR}/usr.sbin; ${MAKE} install
cd ${.CURDIR}/gnu/libexec; ${MAKE} install
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# bootstrap-tools: Build tools needed for compatibility
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_strfile= games/fortune/strfile
.endif
bootstrap-tools:
.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.sbin/config \
gnu/usr.bin/gperf gnu/usr.bin/texinfo
cd ${.CURDIR}/${_tool}; \
${MAKE} obj; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endfor
#
# build-tools: Build special purpose build tools
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_games= games/adventure games/hack games/phantasia
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
_share= share/syscons/scrnmaps
.endif
.if !defined(NO_FORTRAN)
_fortran= gnu/usr.bin/cc/f771
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_libroken4= kerberosIV/lib/libroken
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS5)
2001-02-14 19:48:51 +00:00
_libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
.endif
build-tools:
.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
${_libroken4} ${_libkrb5} lib/libncurses ${_share} usr.sbin/sysinstall
cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
.endfor
#
# cross-tools: Build cross-building tools
#
# WARNING: Because the bootstrap tools are expected to run on the
# build-machine, MACHINE_ARCH is *always* set to BUILD_ARCH when this
# target is being made. TARGET_ARCH is *always* set to reflect the
# target-machine (which you can set by specifying MACHINE_ARCH on
# make's command-line, get it?).
# The reason is simple: we build these tools not to be run on the
# architecture we're cross-building, but on the architecture we're
# currently building on (ie the host-machine) and we expect these
# tools to produce output for the architecture we're trying to
# cross-build.
#
.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
_elf2exe= usr.sbin/elf2exe
.endif
.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
_btxld= usr.sbin/btxld
.endif
.if !defined(NOPERL)
_perl= gnu/usr.bin/perl/libperl gnu/usr.bin/perl/miniperl
.endif
cross-tools:
.for _tool in ${_btxld} ${_elf2exe} ${_perl} \
usr.bin/gensetdefs gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
cd ${.CURDIR}/${_tool}; \
${MAKE} obj; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endfor
#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# includes - possibly generate and install the include files.
#
includes:
cd ${.CURDIR}/include; ${MAKE} -B all install
cd ${.CURDIR}/gnu/include; ${MAKE} install
cd ${.CURDIR}/gnu/lib/libmp; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libgmp; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
1999-12-29 14:47:00 +00:00
.if exists(${.CURDIR}/secure/lib/libcrypto)
cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
1999-12-29 14:47:00 +00:00
.endif
.if exists(${.CURDIR}/secure/lib/libssl)
cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
.endif
1999-12-29 14:47:00 +00:00
.endif
.if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
.else
cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS5)
cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
1999-10-04 14:57:38 +00:00
cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
.if !defined(WANT_CSRG_LIBM)
cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
cd ${.CURDIR}/lib/libsbuf; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libskey; ${MAKE} beforeinstall
1998-10-05 08:06:45 +00:00
cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libss; ${MAKE} -B hdrs beforeinstall
cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The following dependencies exist between the libraries:
#
# lib*: csu libgcc_pic
# libatm: libmd
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
# libcam: libsbuf
# libcrypt: libmd
# libdialog: libncurses
# libedit: libncurses
# libg++: libm
# libkrb: libcrypt
# libopie: libmd
# libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
# libskey libtacplus libutil libz libssh
# libradius: libmd
# libreadline: libncurses
# libskey: libcrypt libmd
# libss: libcom_err
# libstc++: libm
# libtacplus: libmd
#
# Across directories this comes down to (rougly):
#
# gnu/lib: lib/libm lib/libncurses
# kerberosIV/lib kerberos5/lib: lib/libcrypt
# lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
# secure/lib/libssh lib/libz
# secure/lib: lib/libmd
#
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
_csu= lib/csu/${MACHINE_ARCH}.pcc
.elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
_csu= lib/csu/i386-elf
.else
_csu= lib/csu/${MACHINE_ARCH}
.endif
1999-01-23 08:44:17 +00:00
.if !defined(NOSECURE) && !defined(NOCRYPT)
_secure_lib= secure/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_kerberosIV_lib= kerberosIV/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_kerberos5_lib= kerberos5/lib
.endif
.if defined(WANT_CSRG_LIBM)
_libm= lib/libm
.else
_libm= lib/msun
.endif
.if ${MACHINE_ARCH} == "i386"
_libkeycap= usr.sbin/pcvt/keycap
.endif
.if !defined(NOPERL)
_libperl= gnu/usr.bin/perl/libperl
.endif
libraries:
.for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
${_secure_lib} ${_kerberosIV_lib} \
${_kerberos5_lib} lib/libcom_err ${_libm} lib/libncurses \
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
lib/libopie lib/libradius lib/libsbuf lib/libskey lib/libtacplus \
lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
.if exists(${.CURDIR}/${_lib})
cd ${.CURDIR}/${_lib}; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endif
.endfor
.for __target in clean cleandepend cleandir depend obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
edir=${entry}.${MACHINE_ARCH}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>