2009-06-14 02:46:07 +00:00
|
|
|
#
|
2010-10-02 01:24:20 +00:00
|
|
|
# OCTEON1 -- Generic kernel configuration file for FreeBSD/MIPS on Cavium Octeon
|
|
|
|
|
#
|
|
|
|
|
# For more information on this file, please read the config(5) manual page,
|
|
|
|
|
# and/or the handbook section on Kernel Configuration Files:
|
2009-06-14 02:46:07 +00:00
|
|
|
#
|
|
|
|
|
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
|
|
|
|
#
|
|
|
|
|
# The handbook is also available locally in /usr/share/doc/handbook
|
|
|
|
|
# if you've installed the doc distribution, otherwise always see the
|
|
|
|
|
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
|
|
|
|
# latest information.
|
|
|
|
|
#
|
|
|
|
|
# An exhaustive list of options and more detailed explanations of the
|
2010-10-02 01:24:20 +00:00
|
|
|
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
|
|
|
|
# If you are in doubt as to the purpose or necessity of a line, check first
|
2009-06-14 02:46:07 +00:00
|
|
|
# in NOTES.
|
|
|
|
|
#
|
|
|
|
|
# $FreeBSD$
|
|
|
|
|
|
2009-06-14 03:01:39 +00:00
|
|
|
ident OCTEON1
|
2009-06-14 02:46:07 +00:00
|
|
|
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
makeoptions ARCH_FLAGS="-march=octeon -mabi=64"
|
2011-01-20 19:17:05 +00:00
|
|
|
makeoptions LDSCRIPT_NAME=ldscript.mips.octeon1
|
2009-06-14 02:46:07 +00:00
|
|
|
|
|
|
|
|
# Don't build any modules yet.
|
|
|
|
|
makeoptions MODULES_OVERRIDE=""
|
2009-11-24 14:57:50 +00:00
|
|
|
makeoptions KERNLOADADDR=0xffffffff80100000
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-01-11 04:40:38 +00:00
|
|
|
include "../cavium/std.octeon1"
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2009-06-14 03:01:39 +00:00
|
|
|
hints "OCTEON1.hints" #Default places to look for devices.
|
2009-06-14 02:46:07 +00:00
|
|
|
|
|
|
|
|
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
|
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# Board-specific support that cannot be auto-detected at runtime.
|
|
|
|
|
#options OCTEON_VENDOR_LANNER # Support for Lanner boards.
|
|
|
|
|
#options OCTEON_BOARD_CAPK_0100ND # Support for CAPK-0100nd.
|
|
|
|
|
|
|
|
|
|
# XXX This option is very nearly irrelevant.
|
2009-07-05 06:49:56 +00:00
|
|
|
options ISA_MIPS64
|
2009-06-14 06:12:21 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
options SCHED_ULE # ULE scheduler
|
|
|
|
|
options PREEMPTION # Enable kernel thread preemption
|
|
|
|
|
options INET # InterNETworking
|
|
|
|
|
options INET6 # IPv6 communications protocols
|
|
|
|
|
options SCTP # Stream Control Transmission Protocol
|
|
|
|
|
options FFS # Berkeley Fast Filesystem
|
|
|
|
|
options SOFTUPDATES # Enable FFS soft updates support
|
|
|
|
|
options UFS_ACL # Support for access control lists
|
|
|
|
|
options UFS_DIRHASH # Improve performance on big directories
|
|
|
|
|
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
|
|
|
|
|
options MD_ROOT # MD is a potential root device
|
2011-05-11 00:52:41 +00:00
|
|
|
options NFSCL # Network Filesystem Client
|
|
|
|
|
options NFSD # Network Filesystem Server
|
2010-10-02 01:24:20 +00:00
|
|
|
options NFSLOCKD # Network Lock Manager
|
2011-05-11 00:52:41 +00:00
|
|
|
options NFS_ROOT # NFS usable as /, requires NFSCL
|
2010-10-02 01:24:20 +00:00
|
|
|
options MSDOSFS # MSDOS Filesystem
|
|
|
|
|
options CD9660 # ISO 9660 Filesystem
|
|
|
|
|
options PROCFS # Process filesystem (requires PSEUDOFS)
|
|
|
|
|
options PSEUDOFS # Pseudo-filesystem framework
|
|
|
|
|
options GEOM_PART_GPT # GUID Partition Tables.
|
|
|
|
|
options GEOM_LABEL # Provides labelization
|
|
|
|
|
#options COMPAT_FREEBSD32 # Compatible with o32 binaries (not yet)
|
|
|
|
|
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
|
|
|
|
|
options KTRACE # ktrace(1) support
|
|
|
|
|
options STACK # stack(9) support
|
|
|
|
|
options SYSVSHM # SYSV-style shared memory
|
|
|
|
|
options SYSVMSG # SYSV-style message queues
|
|
|
|
|
options SYSVSEM # SYSV-style semaphores
|
|
|
|
|
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
|
|
|
|
|
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
|
|
|
|
|
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
|
|
|
|
|
options AUDIT # Security event auditing
|
|
|
|
|
options MAC # TrustedBSD MAC Framework
|
|
|
|
|
#options KDTRACE_FRAME # Ensure frames are compiled in
|
|
|
|
|
#options KDTRACE_HOOKS # Kernel DTrace hooks
|
|
|
|
|
options INCLUDE_CONFIG_FILE # Include this file in kernel
|
|
|
|
|
options NO_SWAPPING # Disable support for paging
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# Debugging for use in -current
|
|
|
|
|
options KDB # Enable kernel debugger support.
|
|
|
|
|
options DDB # Support DDB.
|
|
|
|
|
options GDB # Support remote GDB.
|
|
|
|
|
options DEADLKRES # Enable the deadlock resolver
|
|
|
|
|
options INVARIANTS # Enable calls of extra sanity checking
|
|
|
|
|
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
|
|
|
|
|
options WITNESS # Enable checks to detect deadlocks and cycles
|
|
|
|
|
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
|
|
|
|
|
options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# Make an SMP-capable kernel by default
|
|
|
|
|
options SMP # Symmetric MultiProcessor Kernel
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# Bus support.
|
|
|
|
|
device pci
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2011-04-24 08:58:58 +00:00
|
|
|
# ATA controllers
|
|
|
|
|
device ahci # AHCI-compatible SATA controllers
|
|
|
|
|
device ata # Legacy ATA/SATA controllers
|
|
|
|
|
options ATA_CAM # Handle legacy controllers with CAM
|
2011-04-26 17:01:49 +00:00
|
|
|
options ATA_STATIC_ID # Static device numbering
|
2011-04-24 08:58:58 +00:00
|
|
|
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
|
|
|
|
|
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# On-board Compact Flash driver.
|
|
|
|
|
device cf
|
|
|
|
|
options ROOTDEVNAME=\"ufs:cf0s2a\" # Default root filesystem.
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# SCSI Controllers
|
|
|
|
|
device ahc # AHA2940 and onboard AIC7xxx devices
|
|
|
|
|
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
|
|
|
|
|
# output. Adds ~128k to driver.
|
|
|
|
|
device ahd # AHA39320/29320 and onboard AIC79xx devices
|
|
|
|
|
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
|
|
|
|
|
# output. Adds ~215k to driver.
|
2011-11-26 18:47:09 +00:00
|
|
|
device esp # AMD Am53C974 (Tekram DC-390(T))
|
2010-10-02 01:24:20 +00:00
|
|
|
device hptiop # Highpoint RocketRaid 3xxx series
|
|
|
|
|
device isp # Qlogic family
|
|
|
|
|
#device ispfw # Firmware for QLogic HBAs- normally a module
|
|
|
|
|
device mpt # LSI-Logic MPT-Fusion
|
|
|
|
|
device mps # LSI-Logic MPT-Fusion 2
|
|
|
|
|
#device ncr # NCR/Symbios Logic
|
|
|
|
|
device trm # Tekram DC395U/UW/F DC315U adapters
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
device adv # Advansys SCSI adapters
|
|
|
|
|
device adw # Advansys wide SCSI adapters
|
|
|
|
|
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
|
|
|
|
|
device bt # Buslogic/Mylex MultiMaster SCSI adapters
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2011-04-24 08:58:58 +00:00
|
|
|
# ATA/SCSI peripherals
|
|
|
|
|
device scbus # SCSI bus (required for ATA/SCSI)
|
2010-10-02 01:24:20 +00:00
|
|
|
device ch # SCSI media changers
|
|
|
|
|
device da # Direct Access (disks)
|
|
|
|
|
device sa # Sequential Access (tape etc)
|
|
|
|
|
device cd # CD
|
2011-04-24 08:58:58 +00:00
|
|
|
device pass # Passthrough device (direct ATA/SCSI access)
|
2010-10-02 01:24:20 +00:00
|
|
|
device ses # SCSI Environmental Services (and SAF-TE)
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# RAID controllers interfaced to the SCSI subsystem
|
|
|
|
|
device amr # AMI MegaRAID
|
|
|
|
|
#XXX it is not 64-bit clean, -scottl
|
|
|
|
|
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
|
|
|
|
|
device ciss # Compaq Smart RAID 5*
|
|
|
|
|
device dpt # DPT Smartcache III, IV - See NOTES for options
|
|
|
|
|
device iir # Intel Integrated RAID
|
|
|
|
|
device ips # IBM (Adaptec) ServeRAID
|
|
|
|
|
device mly # Mylex AcceleRAID/eXtremeRAID
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# RAID controllers
|
|
|
|
|
device aac # Adaptec FSA RAID
|
|
|
|
|
device aacp # SCSI passthrough for aac (requires CAM)
|
|
|
|
|
device ida # Compaq Smart RAID
|
|
|
|
|
device mfi # LSI MegaRAID SAS
|
|
|
|
|
device mlx # Mylex DAC960 family
|
|
|
|
|
#XXX pointer/int warnings
|
|
|
|
|
#device pst # Promise Supertrak SX6000
|
|
|
|
|
device twe # 3ware ATA RAID
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# PCCARD (PCMCIA) support
|
|
|
|
|
# PCMCIA and cardbus bridge support
|
|
|
|
|
device cbb # cardbus (yenta) bridge
|
|
|
|
|
device pccard # PC Card (16-bit) bus
|
|
|
|
|
device cardbus # CardBus (32-bit) bus
|
|
|
|
|
|
|
|
|
|
# Serial (COM) ports
|
|
|
|
|
device uart # Generic UART driver
|
|
|
|
|
|
|
|
|
|
# If you've got a "dumb" serial or parallel PCI card that is
|
|
|
|
|
# supported by the puc(4) glue driver, uncomment the following
|
|
|
|
|
# line to enable it (connects to sio, uart and/or ppc drivers):
|
|
|
|
|
#device puc
|
|
|
|
|
|
|
|
|
|
# On-board Cavium Octeon Ethernet.
|
|
|
|
|
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
|
|
|
|
|
device octe
|
|
|
|
|
|
2011-01-10 03:48:41 +00:00
|
|
|
# Cavium Octeon management Ethernet.
|
|
|
|
|
device octm
|
|
|
|
|
|
o) Make it possible to attach a PHY directly to an octe device rather than
using miibus, since for some devices that use multiple addresses on the bus,
going through miibus may be unclear, and for devices that are not standard
MII PHYs, miibus may throw a fit, necessitating complicated interfaces to
fake the interface that it expects during probe/attach.
o) Make the mv88e61xx SMI interface in octe attach a PHY directly and fix some
mistakes in the code that resulted from trying too hard to present a nice
interface to miibus.
o) Add a PHY driver for the mv88e61xx. If attached (it is optional in kernel
compiles so the default behavior of having a dumb switch is preserved) it
will place the switch in a VLAN-tagging mode such that each physical port
has a VLAN associated with it and interfaces for the VLANs can be created to
address or bridge between them.
XXX It would be nice for this to be part of a single module including the
SMI interface, and for it to fit into a generic switch configuration
framework and for it to use DSA rather than VLANs, but this is a start
and gives some sense of the parameters of such frameworks that are not
currently present in FreeBSD. In lieu of a switch configuration
interface, per-port media status and VLAN settings are in a sysctl tree.
XXX There may be some minor nits remaining in the handling of broadcast,
multicast and unknown destination traffic. It would also be nice to go
through and replace the few remaining magic numbers with macros at some
point in the future.
XXX This has only been tested with the MV88E6161, but it should work with
minimal or no modification on related switches, so support for probing
them was included.
Thanks to Pat Saavedra of TELoIP and Rafal Jaworowski of Semihalf for their
assistance in understanding the switch chipset.
2010-10-13 09:17:44 +00:00
|
|
|
# Switch PHY support for the octe driver. These currently present a VLAN per
|
|
|
|
|
# physical port, but may eventually provide support for DSA or similar instead.
|
|
|
|
|
#device mv88e61xxphy # Marvell 88E61XX
|
|
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# PCI Ethernet NICs.
|
|
|
|
|
device de # DEC/Intel DC21x4x (``Tulip'')
|
|
|
|
|
device em # Intel PRO/1000 Gigabit Ethernet Family
|
|
|
|
|
device igb # Intel PRO/1000 PCIE Server Gigabit Family
|
|
|
|
|
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
|
|
|
|
|
device le # AMD Am7900 LANCE and Am79C9xx PCnet
|
|
|
|
|
device ti # Alteon Networks Tigon I/II gigabit Ethernet
|
|
|
|
|
device txp # 3Com 3cR990 (``Typhoon'')
|
|
|
|
|
device vx # 3Com 3c590, 3c595 (``Vortex'')
|
|
|
|
|
|
|
|
|
|
# PCI Ethernet NICs that use the common MII bus controller code.
|
|
|
|
|
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
|
|
|
|
|
device miibus # MII bus support
|
|
|
|
|
device ae # Attansic/Atheros L2 FastEthernet
|
|
|
|
|
device age # Attansic/Atheros L1 Gigabit Ethernet
|
|
|
|
|
device alc # Atheros AR8131/AR8132 Ethernet
|
|
|
|
|
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
|
|
|
|
|
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
|
|
|
|
|
device bfe # Broadcom BCM440x 10/100 Ethernet
|
|
|
|
|
device bge # Broadcom BCM570xx Gigabit Ethernet
|
|
|
|
|
device dc # DEC/Intel 21143 and various workalikes
|
|
|
|
|
device et # Agere ET1310 10/100/Gigabit Ethernet
|
|
|
|
|
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
|
|
|
|
|
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
|
|
|
|
|
device lge # Level 1 LXT1001 gigabit Ethernet
|
|
|
|
|
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
|
|
|
|
|
device nge # NatSemi DP83820 gigabit Ethernet
|
|
|
|
|
#device nve # nVidia nForce MCP on-board Ethernet Networking
|
|
|
|
|
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
|
|
|
|
|
device re # RealTek 8139C+/8169/8169S/8110S
|
|
|
|
|
device rl # RealTek 8129/8139
|
|
|
|
|
device sf # Adaptec AIC-6915 (``Starfire'')
|
|
|
|
|
device sge # Silicon Integrated Systems SiS190/191
|
|
|
|
|
device sis # Silicon Integrated Systems SiS 900/SiS 7016
|
|
|
|
|
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
|
|
|
|
|
device ste # Sundance ST201 (D-Link DFE-550TX)
|
|
|
|
|
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
|
|
|
|
|
device tl # Texas Instruments ThunderLAN
|
|
|
|
|
device tx # SMC EtherPower II (83c170 ``EPIC'')
|
|
|
|
|
device vge # VIA VT612x gigabit Ethernet
|
|
|
|
|
device vr # VIA Rhine, Rhine II
|
|
|
|
|
device wb # Winbond W89C840F
|
|
|
|
|
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
|
|
|
|
|
|
|
|
|
|
# Wireless NIC cards
|
|
|
|
|
device wlan # 802.11 support
|
|
|
|
|
options IEEE80211_DEBUG # enable debug msgs
|
|
|
|
|
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
|
|
|
|
|
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
|
|
|
|
|
device wlan_wep # 802.11 WEP support
|
|
|
|
|
device wlan_ccmp # 802.11 CCMP support
|
|
|
|
|
device wlan_tkip # 802.11 TKIP support
|
|
|
|
|
device wlan_amrr # AMRR transmit rate control algorithm
|
|
|
|
|
device an # Aironet 4500/4800 802.11 wireless NICs.
|
2011-03-31 08:07:13 +00:00
|
|
|
device ath # Atheros NIC's
|
2010-10-02 01:24:20 +00:00
|
|
|
device ath_hal # pci/cardbus chip support
|
|
|
|
|
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
|
|
|
|
|
device ath_rate_sample # SampleRate tx rate control for ath
|
|
|
|
|
device ral # Ralink Technology RT2500 wireless NICs.
|
|
|
|
|
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
|
|
|
|
|
|
|
|
|
|
# Pseudo devices.
|
|
|
|
|
device loop # Network loopback
|
|
|
|
|
device random # Entropy device
|
|
|
|
|
device ether # Ethernet support
|
|
|
|
|
device vlan # 802.1Q VLAN support
|
|
|
|
|
device tun # Packet tunnel.
|
|
|
|
|
device pty # BSD-style compatibility pseudo ttys
|
|
|
|
|
device md # Memory "disks"
|
|
|
|
|
device gif # IPv6 and IPv4 tunneling
|
|
|
|
|
device faith # IPv6-to-IPv4 relaying (translation)
|
|
|
|
|
device firmware # firmware assist module
|
|
|
|
|
|
|
|
|
|
# The `bpf' device enables the Berkeley Packet Filter.
|
|
|
|
|
# Be aware of the administrative consequences of enabling this!
|
|
|
|
|
# Note that 'bpf' is required for DHCP.
|
|
|
|
|
device bpf # Berkeley packet filter
|
2009-06-14 02:46:07 +00:00
|
|
|
|
2010-10-02 01:24:20 +00:00
|
|
|
# USB support
|
|
|
|
|
options USB_DEBUG # enable debug msgs
|
|
|
|
|
device octusb # Cavium Octeon on-board USB interface (USB 2.0)
|
|
|
|
|
device uhci # UHCI PCI->USB interface
|
|
|
|
|
device ohci # OHCI PCI->USB interface
|
|
|
|
|
device ehci # EHCI PCI->USB interface (USB 2.0)
|
|
|
|
|
device usb # USB Bus (required)
|
|
|
|
|
#device udbp # USB Double Bulk Pipe devices
|
|
|
|
|
device uhid # "Human Interface Devices"
|
|
|
|
|
device ulpt # Printer
|
|
|
|
|
device umass # Disks/Mass storage - Requires scbus and da
|
|
|
|
|
device ums # Mouse
|
|
|
|
|
device urio # Diamond Rio 500 MP3 player
|
|
|
|
|
# USB Serial devices
|
|
|
|
|
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
|
|
|
|
|
device uark # Technologies ARK3116 based serial adapters
|
|
|
|
|
device ubsa # Belkin F5U103 and compatible serial adapters
|
|
|
|
|
device uftdi # For FTDI usb serial adapters
|
|
|
|
|
device uipaq # Some WinCE based devices
|
|
|
|
|
device uplcom # Prolific PL-2303 serial adapters
|
|
|
|
|
device uslcom # SI Labs CP2101/CP2102 serial adapters
|
|
|
|
|
device uvisor # Visor and Palm devices
|
|
|
|
|
device uvscom # USB serial support for DDI pocket's PHS
|
|
|
|
|
# USB Ethernet, requires miibus
|
|
|
|
|
device aue # ADMtek USB Ethernet
|
|
|
|
|
device axe # ASIX Electronics USB Ethernet
|
|
|
|
|
device cdce # Generic USB over Ethernet
|
|
|
|
|
device cue # CATC USB Ethernet
|
|
|
|
|
device kue # Kawasaki LSI USB Ethernet
|
|
|
|
|
device rue # RealTek RTL8150 USB Ethernet
|
|
|
|
|
device udav # Davicom DM9601E USB
|
|
|
|
|
# USB Wireless
|
|
|
|
|
device rum # Ralink Technology RT2501USB wireless NICs
|
|
|
|
|
device uath # Atheros AR5523 wireless NICs
|
|
|
|
|
device ural # Ralink Technology RT2500USB wireless NICs
|
2011-09-11 17:39:51 +00:00
|
|
|
device zyd # ZyDAS zd1211/zd1211b wireless NICs
|