1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
freebsd/usr.sbin/ppp/tty.c

455 lines
12 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Brian Somers <brian@Awfulhak.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1999-08-28 01:35:59 +00:00
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/un.h>
#if defined(__OpenBSD__) || defined(__NetBSD__)
#include <sys/ioctl.h>
#endif
#include <errno.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
#include <sys/uio.h>
#include <termios.h>
#include <unistd.h>
#include "layer.h"
#include "defs.h"
#include "mbuf.h"
#include "log.h"
#include "timer.h"
#include "lqr.h"
#include "hdlc.h"
#include "throughput.h"
#include "fsm.h"
#include "lcp.h"
#include "ccp.h"
#include "link.h"
#include "async.h"
#include "descriptor.h"
#include "physical.h"
#include "mp.h"
#include "chat.h"
#include "auth.h"
#include "chap.h"
#include "cbcp.h"
#include "datalink.h"
#include "main.h"
#include "tty.h"
#if defined(__mac68k__) || defined(__macppc__)
#undef CRTS_IFLOW
#undef CCTS_OFLOW
#define CRTS_IFLOW CDTRCTS
#define CCTS_OFLOW CDTRCTS
#endif
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
#define Online(dev) ((dev)->mbits & TIOCM_CD)
struct ttydevice {
struct device dev; /* What struct physical knows about */
struct pppTimer Timer; /* CD checks */
int mbits; /* Current DCD status */
int carrier_seconds; /* seconds before CD is *required* */
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct termios ios; /* To be able to reset from raw mode */
};
#define device2tty(d) ((d)->type == TTY_DEVICE ? (struct ttydevice *)d : NULL)
int
tty_DeviceSize(void)
{
return sizeof(struct ttydevice);
}
/*
* tty_Timeout() watches the DCD signal and mentions it if it's status
* changes.
*/
static void
tty_Timeout(void *data)
{
struct physical *p = data;
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
int ombits, change;
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Stop(&dev->Timer);
dev->Timer.load = SECTICKS; /* Once a second please */
timer_Start(&dev->Timer);
ombits = dev->mbits;
if (p->fd >= 0) {
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (ioctl(p->fd, TIOCMGET, &dev->mbits) < 0) {
/* we must be a pty ? */
log_Printf(LogDEBUG, "%s: ioctl error (%s)!\n", p->link.name,
strerror(errno));
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Stop(&dev->Timer);
return;
}
} else
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
dev->mbits = 0;
if (ombits == -1) {
/* First time looking for carrier */
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (Online(dev))
log_Printf(LogPHASE, "%s: %s: CD detected\n", p->link.name, p->name.full);
else if (++dev->carrier_seconds >= p->cfg.cd.delay) {
if (p->cfg.cd.necessity == CD_REQUIRED)
log_Printf(LogPHASE, "%s: %s: Required CD not detected\n",
p->link.name, p->name.full);
else {
log_Printf(LogPHASE, "%s: %s doesn't support CD\n",
p->link.name, p->name.full);
dev->mbits = TIOCM_CD; /* Dodgy null-modem cable ? */
}
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Stop(&dev->Timer);
/* tty_AwaitCarrier() will notice */
} else {
/* Keep waiting */
log_Printf(LogDEBUG, "%s: %s: Still no carrier (%d/%d)\n",
p->link.name, p->name.full, dev->carrier_seconds,
p->cfg.cd.delay);
dev->mbits = -1;
}
} else {
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
change = ombits ^ dev->mbits;
if (change & TIOCM_CD) {
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (dev->mbits & TIOCM_CD)
log_Printf(LogDEBUG, "%s: offline -> online\n", p->link.name);
else {
log_Printf(LogDEBUG, "%s: online -> offline\n", p->link.name);
log_Printf(LogPHASE, "%s: Carrier lost\n", p->link.name);
datalink_Down(p->dl, CLOSE_NORMAL);
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Stop(&dev->Timer);
}
} else
log_Printf(LogDEBUG, "%s: Still %sline\n", p->link.name,
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
Online(dev) ? "on" : "off");
}
}
static void
tty_StartTimer(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
timer_Stop(&dev->Timer);
dev->Timer.load = SECTICKS;
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
dev->Timer.func = tty_Timeout;
dev->Timer.name = "tty CD";
dev->Timer.arg = p;
log_Printf(LogDEBUG, "%s: Using tty_Timeout [%p]\n",
p->link.name, tty_Timeout);
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Start(&dev->Timer);
}
static int
tty_AwaitCarrier(struct physical *p)
{
struct ttydevice *dev = device2tty(p->handler);
if (p->cfg.cd.necessity == CD_NOTREQUIRED || physical_IsSync(p))
return CARRIER_OK;
if (dev->mbits == -1) {
if (dev->Timer.state == TIMER_STOPPED) {
dev->carrier_seconds = 0;
tty_StartTimer(p);
}
return CARRIER_PENDING; /* Not yet ! */
}
return Online(dev) || !p->cfg.cd.necessity == CD_REQUIRED ?
CARRIER_OK : CARRIER_LOST;
}
static int
tty_Raw(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
struct termios ios;
int oldflag;
log_Printf(LogDEBUG, "%s: Entering tty_Raw\n", p->link.name);
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (p->type != PHYS_DIRECT && p->fd >= 0 && !Online(dev))
log_Printf(LogDEBUG, "%s: Raw: descriptor = %d, mbits = %x\n",
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
p->link.name, p->fd, dev->mbits);
if (!physical_IsSync(p)) {
tcgetattr(p->fd, &ios);
cfmakeraw(&ios);
if (p->cfg.rts_cts)
ios.c_cflag |= CLOCAL | CCTS_OFLOW | CRTS_IFLOW;
else
ios.c_cflag |= CLOCAL;
if (p->type != PHYS_DEDICATED)
ios.c_cflag |= HUPCL;
tcsetattr(p->fd, TCSANOW, &ios);
}
oldflag = fcntl(p->fd, F_GETFL, 0);
if (oldflag < 0)
return 0;
fcntl(p->fd, F_SETFL, oldflag | O_NONBLOCK);
return 1;
}
static void
tty_Offline(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
if (p->fd >= 0) {
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer_Stop(&dev->Timer);
dev->mbits &= ~TIOCM_DTR; /* XXX: Hmm, what's this supposed to do ? */
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (Online(dev)) {
struct termios tio;
tcgetattr(p->fd, &tio);
if (cfsetspeed(&tio, B0) == -1)
log_Printf(LogWARN, "%s: Unable to set physical to speed 0\n",
p->link.name);
else
tcsetattr(p->fd, TCSANOW, &tio);
}
}
}
static void
tty_Cooked(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
int oldflag;
tty_Offline(p); /* In case of emergency close()s */
tcflush(p->fd, TCIOFLUSH);
if (!physical_IsSync(p))
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
tcsetattr(p->fd, TCSAFLUSH, &dev->ios);
if ((oldflag = fcntl(p->fd, F_GETFL, 0)) != -1)
fcntl(p->fd, F_SETFL, oldflag & ~O_NONBLOCK);
}
static void
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
tty_StopTimer(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
timer_Stop(&dev->Timer);
}
static void
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
tty_Free(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
tty_Offline(p); /* In case of emergency close()s */
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
free(dev);
}
static int
tty_Speed(struct physical *p)
{
struct termios ios;
if (tcgetattr(p->fd, &ios) == -1)
return 0;
return SpeedToInt(cfgetispeed(&ios));
}
static const char *
tty_OpenInfo(struct physical *p)
{
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct ttydevice *dev = device2tty(p->handler);
static char buf[13];
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
if (Online(dev))
strcpy(buf, "with");
else
strcpy(buf, "no");
strcat(buf, " carrier");
return buf;
}
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
static void
tty_device2iov(struct device *d, struct iovec *iov, int *niov,
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
int maxiov, pid_t newpid)
{
struct ttydevice *dev = device2tty(d);
int sz = physical_MaxDeviceSize();
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
iov[*niov].iov_base = realloc(d, sz);
if (iov[*niov].iov_base == NULL) {
log_Printf(LogALERT, "Failed to allocate memory: %d\n", sz);
AbortProgram(EX_OSERR);
}
iov[*niov].iov_len = sz;
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
(*niov)++;
if (dev->Timer.state != TIMER_STOPPED) {
timer_Stop(&dev->Timer);
dev->Timer.state = TIMER_RUNNING;
}
}
static struct device basettydevice = {
TTY_DEVICE,
"tty",
tty_AwaitCarrier,
tty_Raw,
tty_Offline,
tty_Cooked,
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
tty_StopTimer,
tty_Free,
NULL,
NULL,
tty_device2iov,
tty_Speed,
tty_OpenInfo
};
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
struct device *
tty_iov2device(int type, struct physical *p, struct iovec *iov, int *niov,
int maxiov)
{
if (type == TTY_DEVICE) {
struct ttydevice *dev = (struct ttydevice *)iov[(*niov)++].iov_base;
dev = realloc(dev, sizeof *dev); /* Reduce to the correct size */
if (dev == NULL) {
log_Printf(LogALERT, "Failed to allocate memory: %d\n",
(int)(sizeof *dev));
AbortProgram(EX_OSERR);
}
/* Refresh function pointers etc */
memcpy(&dev->dev, &basettydevice, sizeof dev->dev);
physical_SetupStack(p, dev->dev.name, PHYSICAL_NOFORCE);
if (dev->Timer.state != TIMER_STOPPED) {
dev->Timer.state = TIMER_STOPPED;
p->handler = &dev->dev; /* For the benefit of StartTimer */
tty_StartTimer(p);
}
return &dev->dev;
}
return NULL;
}
struct device *
tty_Create(struct physical *p)
{
struct ttydevice *dev;
struct termios ios;
int oldflag;
if (p->fd < 0 || !isatty(p->fd))
/* Don't want this */
return NULL;
if (*p->name.full == '\0') {
physical_SetDevice(p, ttyname(p->fd));
log_Printf(LogDEBUG, "%s: Input is a tty (%s)\n",
p->link.name, p->name.full);
} else
log_Printf(LogDEBUG, "%s: Opened %s\n", p->link.name, p->name.full);
/* We're gonna return a ttydevice (unless something goes horribly wrong) */
if ((dev = malloc(sizeof *dev)) == NULL) {
/* Complete failure - parent doesn't continue trying to ``create'' */
close(p->fd);
p->fd = -1;
return NULL;
}
memcpy(&dev->dev, &basettydevice, sizeof dev->dev);
1999-05-16 11:58:48 +00:00
memset(&dev->Timer, '\0', sizeof dev->Timer);
dev->mbits = -1;
tcgetattr(p->fd, &ios);
dev->ios = ios;
log_Printf(LogDEBUG, "%s: tty_Create: physical (get): fd = %d,"
" iflag = %lx, oflag = %lx, cflag = %lx\n", p->link.name, p->fd,
(u_long)ios.c_iflag, (u_long)ios.c_oflag, (u_long)ios.c_cflag);
cfmakeraw(&ios);
if (p->cfg.rts_cts)
ios.c_cflag |= CLOCAL | CCTS_OFLOW | CRTS_IFLOW;
else {
ios.c_cflag |= CLOCAL;
ios.c_iflag |= IXOFF;
}
ios.c_iflag |= IXON;
if (p->type != PHYS_DEDICATED)
ios.c_cflag |= HUPCL;
if (p->type != PHYS_DIRECT) {
/* Change tty speed when we're not in -direct mode */
ios.c_cflag &= ~(CSIZE | PARODD | PARENB);
ios.c_cflag |= p->cfg.parity;
if (cfsetspeed(&ios, IntToSpeed(p->cfg.speed)) == -1)
log_Printf(LogWARN, "%s: %s: Unable to set speed to %d\n",
p->link.name, p->name.full, p->cfg.speed);
}
tcsetattr(p->fd, TCSADRAIN, &ios);
log_Printf(LogDEBUG, "%s: physical (put): iflag = %lx, oflag = %lx, "
"cflag = %lx\n", p->link.name, (u_long)ios.c_iflag,
(u_long)ios.c_oflag, (u_long)ios.c_cflag);
oldflag = fcntl(p->fd, F_GETFL, 0);
if (oldflag < 0) {
/* Complete failure - parent doesn't continue trying to ``create'' */
log_Printf(LogWARN, "%s: Open: Cannot get physical flags: %s\n",
p->link.name, strerror(errno));
tty_Cooked(p);
close(p->fd);
p->fd = -1;
free(dev);
return NULL;
} else
fcntl(p->fd, F_SETFL, oldflag & ~O_NONBLOCK);
physical_SetupStack(p, dev->dev.name, PHYSICAL_NOFORCE);
return &dev->dev;
}