mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
1f006b061a
freebsd/sys/dev/puc/pucdata.c

1024 lines
28 KiB
C
Raw Normal View History

Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/* $NetBSD: pucdata.c,v 1.25 2001/12/16 22:23:01 thorpej Exp $ */
/*
* Copyright (c) 1998, 1999 Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* PCI "universal" communications card driver configuration data (used to
* match/attach the cards).
*/
#include <sys/param.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/sio/sioreg.h>
#include <dev/puc/pucvar.h>
#define COM_FREQ DEFAULT_RCLK
const struct puc_device_description puc_devices[] = {
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ "Comtrol RocketPort 550/4 RJ45",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8014, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/Quad",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8015, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 RJ11 part A",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8010, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 RJ11 part B",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8011, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 Octa part A",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8012, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 Octa part B",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8013, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 part A",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8018, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/8 part B",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
{ 0x11fe, 0x8019, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
Support the Comtrol RocketPort 550 PCi 16 (used with RocketPort I/F box). Sponsored by: Feral Software
2002-06-18 02:39:12 +00:00
{ "Comtrol RocketPort 550/16 part A",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Support the Comtrol RocketPort 550 PCi 16 (used with RocketPort I/F box). Sponsored by: Feral Software
2002-06-18 02:39:12 +00:00
{ 0x11fe, 0x8016, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
},
},
{ "Comtrol RocketPort 550/16 part B",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Support the Comtrol RocketPort 550 PCi 16 (used with RocketPort I/F box). Sponsored by: Feral Software
2002-06-18 02:39:12 +00:00
{ 0x11fe, 0x8017, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x20, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x28, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x30, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x38, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x40, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x48, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x50, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x10, 0x58, COM_FREQ * 4 },
},
},
Add support for Comtrol RocketPort 550 PCi models: 4 RJ45, 4 Quadcable, 8 RJ11, 8 Octacable, and 8 (used with RocketPort I/F box). Note: untested due to lack of hardware
2002-06-18 03:05:10 +00:00
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*
* XXX no entry because I have no data:
* XXX Dolphin Peripherals 4006 (single parallel)
*/
/*
* Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
{ "Dolphin Peripherals 4014",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x10b5, 0x9050, 0xd84d, 0x6810 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x24, 0x00, 0x00 },
},
},
/*
* XXX Dolphin Peripherals 4025 (single serial)
* (clashes with Dolphin Peripherals 4036 (2s variant)
*/
/*
* Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
{ "Dolphin Peripherals 4035",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x10b5, 0x9050, 0xd84d, 0x6808 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/*
* Dolphin Peripherals 4036 (dual serial port) card.
* (Dolpin 4025 has the same ID but only one port)
*/
{ "Dolphin Peripherals 4036",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1409, 0x7168, 0x0, 0x0 },
{ 0xffff, 0xffff, 0x0, 0x0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
},
},
/*
* XXX no entry because I have no data:
* XXX Dolphin Peripherals 4078 (dual serial and single parallel)
*/
/*
* SIIG Boards.
*
* SIIG provides documentation for their boards at:
* <URL:http://www.siig.com/driver.htm>
*
* Please excuse the weird ordering, it's the order they
* use in their documentation.
*/
/*
* SIIG "10x" family boards.
*/
/* SIIG Cyber Serial PCI 16C550 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C550 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial PCI 16C650 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C650 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial PCI 16C850 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C850 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1002, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
},
},
/* SIIG Cyber I/O PCI 16C550 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C550 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1010, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber I/O PCI 16C650 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C650 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1011, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber I/O PCI 16C850 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C850 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1012, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber Parallel PCI (10x family): 1P */
{ "SIIG Cyber Parallel PCI (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/* SIIG Cyber Parallel Dual PCI (10x family): 2P */
{ "SIIG Cyber Parallel Dual PCI (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1021, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
/* SIIG Cyber Serial Dual PCI 16C550 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C550 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1030, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial Dual PCI 16C650 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C650 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1031, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial Dual PCI 16C850 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C850 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1032, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 2S1P PCI 16C550 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C550 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1034, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
/* SIIG Cyber 2S1P PCI 16C650 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C650 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1035, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
/* SIIG Cyber 2S1P PCI 16C850 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C850 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1036, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
/* SIIG Cyber 4S PCI 16C550 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C550 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1050, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 4S PCI 16C650 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C650 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 4S PCI 16C850 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C850 (10x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x1052, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ },
},
},
/*
* SIIG "20x" family boards.
*/
/* SIIG Cyber Parallel PCI (20x family): 1P */
{ "SIIG Cyber Parallel PCI (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
/* SIIG Cyber Parallel Dual PCI (20x family): 2P */
{ "SIIG Cyber Parallel Dual PCI (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2021, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/* SIIG Cyber 2P1S PCI 16C550 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2040, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber 2P1S PCI 16C650 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2041, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber 2P1S PCI 16C850 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2042, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
},
},
/* SIIG Cyber Serial PCI 16C550 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial PCI 16C650 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial PCI 16C850 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2002, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* SIIG Cyber I/O PCI 16C550 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2010, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
},
},
/* SIIG Cyber I/O PCI 16C650 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2011, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
},
},
/* SIIG Cyber I/O PCI 16C850 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2012, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
},
},
/* SIIG Cyber Serial Dual PCI 16C550 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2030, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial Dual PCI 16C650 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2031, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
/* SIIG Cyber Serial Dual PCI 16C850 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2032, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 2S1P PCI 16C550 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2060, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/* SIIG Cyber 2S1P PCI 16C650 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2061, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/* SIIG Cyber 2S1P PCI 16C850 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2062, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/* SIIG Cyber 4S PCI 16C550 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C550 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2050, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 4S PCI 16C650 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C650 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* SIIG Cyber 4S PCI 16C850 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C850 (20x family)",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x131f, 0x2052, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
Add an entry for VScom PCI-200L 2 port serial card. PR: 41142 Submitted by: Shinsuke Matsui <smatsui@internet-inc.co.jp> Obtained from: OpenBSD
2002-08-22 10:37:55 +00:00
/* VScom PCI-200L: 2S */
{ "VScom PCI-200L",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add an entry for VScom PCI-200L 2 port serial card. PR: 41142 Submitted by: Shinsuke Matsui <smatsui@internet-inc.co.jp> Obtained from: OpenBSD
2002-08-22 10:37:55 +00:00
{ 0x14d2, 0x8020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8},
},
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/* VScom PCI-400: 4S */
{ "VScom PCI-400",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x10b5, 0x1077, 0x10b5, 0x1077 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
},
},
/* VScom PCI-800: 8S */
{ "VScom PCI-800",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x10b5, 0x1076, 0x10b5, 0x1076 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x20, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x28, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x30, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x38, COM_FREQ * 8 },
},
},
/*
* VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
* 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
* device ID 3 and PCI device 1 device ID 4.
*/
{ "Titan PCI-800H",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x14d2, 0xa003, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 8 },
},
},
{ "Titan PCI-800H",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x14d2, 0xa004, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 8 },
},
},
{ "Titan PCI-200H",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x14d2, 0xa005, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
},
},
/* NEC PK-UG-X001 K56flex PCI Modem card.
NEC MARTH bridge chip and Rockwell RCVDL56ACF/SP using. */
{ "NEC PK-UG-X001 K56flex PCI Modem",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1033, 0x0074, 0x1033, 0x8014 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* NEC PK-UG-X008 */
{ "NEC PK-UG-X008",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1033, 0x007d, 0x1033, 0x8012 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ},
},
},
/* Lava Computers 2SP-PCI */
{ "Lava Computers 2SP-PCI parallel port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1407, 0x8000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
/* Lava Computers 2SP-PCI and Quattro-PCI serial ports */
{ "Lava Computers dual serial port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1407, 0x0100, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
Add another chip id for the new LAVA 4-port serial card. PR: 37333 Submitted by: Ari Suutari <ari.suutari@syncrontech.com> MFC after: 4 days
2002-04-24 18:55:50 +00:00
/* Lava Computers newer Quattro-PCI serial ports */
{ "Lava Computers Quattro-PCI serial port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add another chip id for the new LAVA 4-port serial card. PR: 37333 Submitted by: Ari Suutari <ari.suutari@syncrontech.com> MFC after: 4 days
2002-04-24 18:55:50 +00:00
{ 0x1407, 0x0120, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/* Lava Computers DSerial PCI serial ports */
{ "Lava Computers serial port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1407, 0x0110, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* Lava Computers Octopus-550 serial ports */
{ "Lava Computers Octopus-550 8-port serial",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1407, 0x0180, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
/* US Robotics (3Com) PCI Modems */
{ "US Robotics (3Com) 3CP5609 PCI 16550 Modem",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x12b9, 0x1008, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* Actiontec 56K PCI Master */
{ "Actiontec 56K PCI Master",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x11c1, 0x0480, 0x0, 0x0 },
{ 0xffff, 0xffff, 0x0, 0x0 },
{
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
/*
* Boards with an Oxford Semiconductor chip.
*
* Oxford Semiconductor provides documentation for their chip at:
* <URL:http://www.oxsemi.com/products/uarts/index.html>
*
* As sold by Kouwell <URL:http://www.kouwell.com/>.
* I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
*/
/* Oxford Semiconductor OX16PCI954 PCI UARTs */
{ "Qxford Semiconductor OX16PCI954 UARTs",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1415, 0x9501, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ },
},
},
/* Oxford Semiconductor OX16PCI954 PCI Parallel port */
{ "Qxford Semiconductor OX16PCI954 Parallel port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1415, 0x9513, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
/* NetMos 2S1P PCI 16C650 : 2S, 1P */
{ "NetMos NM9835 Dual UART and 1284 Printer port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x9710, 0x9835, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
/*
* This is the Middle Digital, Inc. PCI-Weasel, which
* uses a PCI interface implemented in FPGA.
*/
{ "Middle Digital, Inc. Weasel serial port",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0xdeaf, 0x9051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
/* SD-LAB PCI I/O Card 4S2P */
{ "Syba Tech Ltd. PCI-4S2P-550-ECP",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
puc_config_win877,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1592, 0x0781, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x2e8, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x2f8, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x10, 0x000, 0x00 },
{ PUC_PORT_TYPE_COM, 0x10, 0x3e8, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x3f8, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x10, 0x000, 0x00 },
},
},
/* Moxa Technologies Co., Ltd. PCI I/O Card 4S RS232/422/485 */
{ "Moxa Technologies, Industio CP-114",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1393, 0x1141, 0, 0 },
{ 0xffff, 0xffff, 0, 0, },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
},
},
/* Moxa Technologies Co., Ltd. PCI I/O Card 8S RS232 */
{ "Moxa Technologies, C168H/PCI",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0x1393, 0x1680, 0, 0 },
{ 0xffff, 0xffff, 0, 0, },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x20, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x28, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x30, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x38, COM_FREQ * 8 },
},
},
Add the "Avlab Technology, PCI IO 2S" card. Submitted by: Terry Glanfield <Terry.Glanfield@program-products.co.uk>
2002-03-06 17:37:27 +00:00
{ "Avlab Technology, PCI IO 2S",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add the "Avlab Technology, PCI IO 2S" card. Submitted by: Terry Glanfield <Terry.Glanfield@program-products.co.uk>
2002-03-06 17:37:27 +00:00
{ 0x14db, 0x2130, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
Add an entry for Avlab's low profile 4 serial port card. PR: 41146 Submitted by: Shinsuke Matsui <smatsui@internet-inc.co.jp> Obtained from: NetBSD
2002-08-22 10:40:00 +00:00
/* Avlab Technology, Inc. Low Profile PCI 4 Serial: 4S */
{ "Avlab Low Profile PCI 4 Serial",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add an entry for Avlab's low profile 4 serial port card. PR: 41146 Submitted by: Shinsuke Matsui <smatsui@internet-inc.co.jp> Obtained from: NetBSD
2002-08-22 10:40:00 +00:00
{ 0x14db, 0x2150, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
Add an entry for Decision Computer Inc, PCCOM 4-port serial cards. PR: kern/36302 Submitted by: Thomas Zenker <thz@Lennartz-electronic.de> MFC after: 1 week
2002-03-28 11:17:20 +00:00
/* Decision Computer Inc, serial ports */
{ "Decision Computer Inc, PCCOM 4-port serial",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add an entry for Decision Computer Inc, PCCOM 4-port serial cards. PR: kern/36302 Submitted by: Thomas Zenker <thz@Lennartz-electronic.de> MFC after: 1 week
2002-03-28 11:17:20 +00:00
{ 0x6666, 0x0001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x10, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x18, COM_FREQ },
},
},
Add an entry for "PCCOM dual port RS232/422/485". Submitted by: Daniel O'Connor <doconnor@gsoft.com.au> MFC after: 1 week
2002-04-01 13:33:43 +00:00
{ "PCCOM dual port RS232/422/485",
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
NULL,
Add an entry for "PCCOM dual port RS232/422/485". Submitted by: Daniel O'Connor <doconnor@gsoft.com.au> MFC after: 1 week
2002-04-01 13:33:43 +00:00
{ 0x6666, 0x0004, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x08, COM_FREQ },
},
},
Add support for IC Book Labs Dreadnought x16 Lite. Approved by: re
2002-12-28 15:45:38 +00:00
{ "IC Book Labs Dreadnought x16 Lite",
fix build (make LINT)
2002-12-30 19:45:30 +00:00
NULL,
Add support for IC Book Labs Dreadnought x16 Lite. Approved by: re
2002-12-28 15:45:38 +00:00
{ 0xb00c, 0x091c, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x20, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x28, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x30, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x38, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x40, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x48, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x50, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x58, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x60, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x68, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x70, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x78, COM_FREQ },
},
},
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0 }
};
Reference in New Issue Copy Permalink