freebsd/sys/mips/conf/XLR

#################################RMI_BSD#####################################
# Copyright (c) 2003-2009 RMI Corporation
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of RMI Corporation, nor the names of its contributors,
#    may be used to endorse or promote products derived from this software
#    without specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#################################RMI_BSD#####################################
# XLR -- Generic kernel configuration file for FreeBSD/mips
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD$

machine 	mips mips
ident 		XLR
include		"../rmi/std.xlr"

makeoptions	MODULES_OVERRIDE=""
makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
makeoptions	KERNLOADADDR=0x80100000
#profile		2

options 	SCHED_ULE		# ULE scheduler
#options 	VERBOSE_SYSINIT
#options 	SCHED_4BSD		# 4BSD scheduler
options 	SMP
options 	PREEMPTION		# Enable kernel thread preemption
#options 	FULL_PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	FFS			# Berkeley Fast Filesystem
#options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	NFSCL
options 	NFS_ROOT
#
options 	BOOTP
options 	BOOTP_NFSROOT
options 	BOOTP_NFSV3
options 	BOOTP_WIRED_TO=nlge0
options 	BOOTP_COMPAT
options 	ROOTDEVNAME=\"nfs:10.1.1.8:/usr/extra/nfsroot\"
#
#options 	MD_ROOT			# MD is a potential root device
#options 	MD_ROOT_SIZE=27000
#options 	MD_ROOT_SIZE=5120
#options 	ROOTDEVNAME=\"ufs:md0\"
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	HZ=1000	
options 	NO_SWAPPING

#Debugging options
options 	KTRACE			# ktrace(1) support
options 	DDB
options 	KDB
options 	GDB
options 	ALT_BREAK_TO_DEBUGGER
options  	BREAK_TO_DEBUGGER
#options 	DEADLKRES		#Enable the deadlock resolver
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
#options 	KTR			# ktr(4) and ktrdump(8) support
#options 	KTR_COMPILE=(KTR_LOCK|KTR_PROC|KTR_INTR|KTR_CALLOUT|KTR_UMA|KTR_SYSC)
#options 	KTR_ENTRIES=131072

#options 	LOCK_PROFILING
#options 	SLEEPQUEUE_PROFILING
#options 	TURNSTILE_PROFILING

device		pci
#device		ata
device 		uart
# Pseudo
device 		loop
device 		random
device 		md
device		bpf

# Network
device		miibus
device		nlge
device 		ether
device		re
device		msk

device		da
device		scbus
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#options 	USB_DEBUG	# enable debug msgs
#device		uhid		# "Human Interface Devices"
device		umass		# Disks/Mass storage - Requires scbus and da

#device		cfi

#i2c
device		ic
device		iic
device		iicbb
device		iicbus
device		ds1374u	# RTC on XLR boards
device		max6657	# Temparature sensor on XLR boards
device		at24co2n	# EEPROM on XLR boards

#crypto
# Not yet
#device		cryptodev
#device		crypto
#device		rmisec
adds XLR config 2009-11-02 15:43:54 +00:00			`#################################RMI_BSD#####################################`
			`# Copyright (c) 2003-2009 RMI Corporation`
			`# All rights reserved.`
			`#`
			`# Redistribution and use in source and binary forms, with or without`
			`# modification, are permitted provided that the following conditions`
			`# are met:`
			`# 1. Redistributions of source code must retain the above copyright`
			`# notice, this list of conditions and the following disclaimer.`
			`# 2. Redistributions in binary form must reproduce the above copyright`
			`# notice, this list of conditions and the following disclaimer in the`
			`# documentation and/or other materials provided with the distribution.`
			`# 3. Neither the name of RMI Corporation, nor the names of its contributors,`
			`# may be used to endorse or promote products derived from this software`
			`# without specific prior written permission.`
			`#`
			# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
			`# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE`
			`# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE`
			`# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE`
			`# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL`
			`# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS`
			`# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)`
			`# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT`
			`# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY`
			`# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF`
			`# SUCH DAMAGE.`
			`#################################RMI_BSD#####################################`
			`# XLR -- Generic kernel configuration file for FreeBSD/mips`
			`#`
			`# For more information on this file, please read the handbook section on`
			`# Kernel Configuration Files:`
			`#`
			`# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html`
			`#`
			`# The handbook is also available locally in /usr/share/doc/handbook`
			`# if you've installed the doc distribution, otherwise always see the`
			`# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the`
			`# latest information.`
			`#`
			`# An exhaustive list of options and more detailed explanations of the`
			`# device lines is also present in the ../../conf/NOTES and NOTES files.`
			`# If you are in doubt as to the purpose or necessity of a line, check first`
			`# in NOTES.`
			`#`
			`# $FreeBSD$`

Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. This makes our naming scheme more closely match other systems and the expectations of much third-party software. MIPS builds which are little-endian should require and exhibit no changes. Big-endian TARGET_ARCHes must be changed: From: To: mipseb mips mipsn32eb mipsn32 mips64eb mips64 An entry has been added to UPDATING and some foot-shooting protection (complete with warnings which should become errors in the near future) to the top-level base system Makefile. 2012-03-29 02:54:35 +00:00			`machine mips mips`
adds XLR config 2009-11-02 15:43:54 +00:00			`ident XLR`
			`include "../rmi/std.xlr"`

Move 'cpu CPU_RMI' to std.xlr, this is common for all XLR cpus. 2011-01-20 12:45:29 +00:00			`makeoptions MODULES_OVERRIDE=""`
adds XLR config 2009-11-02 15:43:54 +00:00			`makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols`
ldscript and conf cleanup for MIPS - Remove sys/conf/ldscript.mips.64 and sys/conf/ldscript.mips.n32 and use ldscript.mips for all ABIs. The default OUTPUT_FORMAT of the toolchain is correct. - Remove LDSCRIPT_NAME entires from XLR n32 and n64 conf files. - Remove TARGET_BIG_ENDIAN from XLR conf files. - Fix machine entry in XLRN32 2011-01-20 08:15:11 +00:00			`makeoptions KERNLOADADDR=0x80100000`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`#profile 2`
adds XLR config 2009-11-02 15:43:54 +00:00
This pushes all of JC's patches that I have in place. I am now able to run 32 cores ok.. but I still will hang on buildworld with a NFS problem. I suspect I am missing a patch for the netlogic rge driver. JC check and see if I am missing anything except your core-mask changes Obtained from: JC 2010-05-16 19:43:48 +00:00			`options SCHED_ULE # ULE scheduler`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`#options VERBOSE_SYSINIT`
This pushes all of JC's patches that I have in place. I am now able to run 32 cores ok.. but I still will hang on buildworld with a NFS problem. I suspect I am missing a patch for the netlogic rge driver. JC check and see if I am missing anything except your core-mask changes Obtained from: JC 2010-05-16 19:43:48 +00:00			`#options SCHED_4BSD # 4BSD scheduler`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`options SMP`
This pushes all of JC's patches that I have in place. I am now able to run 32 cores ok.. but I still will hang on buildworld with a NFS problem. I suspect I am missing a patch for the netlogic rge driver. JC check and see if I am missing anything except your core-mask changes Obtained from: JC 2010-05-16 19:43:48 +00:00			`options PREEMPTION # Enable kernel thread preemption`
adds XLR config 2009-11-02 15:43:54 +00:00			`#options FULL_PREEMPTION # Enable kernel thread preemption`
			`options INET # InterNETworking`
			`options INET6 # IPv6 communications protocols`
			`options FFS # Berkeley Fast Filesystem`
			`#options SOFTUPDATES # Enable FFS soft updates support`
			`options UFS_ACL # Support for access control lists`
			`options UFS_DIRHASH # Improve performance on big directories`
Use new option names for NFS client and NFS server See UPDATING entry for 20110427 2011-05-11 00:52:41 +00:00			`options NFSCL`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`options NFS_ROOT`
My NFS configured version. 2009-11-11 22:37:17 +00:00			`#`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`options BOOTP`
			`options BOOTP_NFSROOT`
			`options BOOTP_NFSV3`
			`options BOOTP_WIRED_TO=nlge0`
			`options BOOTP_COMPAT`
			`options ROOTDEVNAME=\"nfs:10.1.1.8:/usr/extra/nfsroot\"`
Ok it helps if you add the bootp options too so that you can get an address ;-) 2009-11-09 19:56:53 +00:00			`#`
Try moving to NFS mount of entire root 2009-11-09 19:26:28 +00:00			`#options MD_ROOT # MD is a potential root device`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`#options MD_ROOT_SIZE=27000`
			`#options MD_ROOT_SIZE=5120`
			`#options ROOTDEVNAME=\"ufs:md0\"`
adds XLR config 2009-11-02 15:43:54 +00:00			`options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions`
			`options HZ=1000`
			`options NO_SWAPPING`

			`#Debugging options`
			`options KTRACE # ktrace(1) support`
			`options DDB`
			`options KDB`
			`options GDB`
			`options ALT_BREAK_TO_DEBUGGER`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`options BREAK_TO_DEBUGGER`
Adjust style (following the already existing rules) for the newly introduced option DEADLKRES. Reported by: danfe, julian, avg 2010-02-15 23:44:48 +00:00			`#options DEADLKRES #Enable the deadlock resolver`
My current conf, that comes up but locks up in make buildworld. You need to follow the mips wiki for building the nfs partition and setup things to mount there (in the conf and in your bootp setup). 2010-01-26 05:17:03 +00:00			`options INVARIANTS #Enable calls of extra sanity checking`
			`options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS`
adds XLR config 2009-11-02 15:43:54 +00:00			`#options WITNESS #Enable checks to detect deadlocks and cycles`
			`#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed`
			`#options KTR # ktr(4) and ktrdump(8) support`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`#options KTR_COMPILE=(KTR_LOCK\|KTR_PROC\|KTR_INTR\|KTR_CALLOUT\|KTR_UMA\|KTR_SYSC)`
adds XLR config 2009-11-02 15:43:54 +00:00			`#options KTR_ENTRIES=131072`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00
			`#options LOCK_PROFILING`
			`#options SLEEPQUEUE_PROFILING`
			`#options TURNSTILE_PROFILING`
adds XLR config 2009-11-02 15:43:54 +00:00
			`device pci`
			`#device ata`
			`device uart`
			`# Pseudo`
			`device loop`
			`device random`
			`device md`
			`device bpf`

			`# Network`
			`device miibus`
Switch to the new network driver nlge, the old rge driver is deprecated now. 2010-11-10 10:23:39 +00:00			`device nlge`
adds XLR config 2009-11-02 15:43:54 +00:00			`device ether`
			`device re`
			`device msk`

Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`device da`
			`device scbus`
			`device ehci # EHCI PCI->USB interface (USB 2.0)`
			`device usb # USB Bus (required)`
			`#options USB_DEBUG # enable debug msgs`
			`#device uhid # "Human Interface Devices"`
			`device umass # Disks/Mass storage - Requires scbus and da`
adds XLR config 2009-11-02 15:43:54 +00:00
			`#device cfi`

			`#i2c`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`device ic`
			`device iic`
			`device iicbb`
			`device iicbus`
			`device ds1374u # RTC on XLR boards`
			`device max6657 # Temparature sensor on XLR boards`
			`device at24co2n # EEPROM on XLR boards`
adds XLR config 2009-11-02 15:43:54 +00:00
			`#crypto`
			`# Not yet`
Re-format XLR configuartion files and remove obsolete options. 2011-01-20 09:01:14 +00:00			`#device cryptodev`
			`#device crypto`
			`#device rmisec`