1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/net/bpfdesc.h

147 lines
5.3 KiB
C
Raw Normal View History

/*-
1994-05-24 10:09:53 +00:00
* Copyright (c) 1990, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from the Stanford/CMU enet packet filter,
* (net/enet.c) distributed as part of 4.3BSD, and code contributed
* to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
* Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)bpfdesc.h 8.1 (Berkeley) 6/10/93
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
1994-08-21 05:11:48 +00:00
#ifndef _NET_BPFDESC_H_
#define _NET_BPFDESC_H_
#include <sys/callout.h>
#include <sys/selinfo.h>
#include <sys/queue.h>
#include <sys/conf.h>
#include <net/if.h>
1994-05-24 10:09:53 +00:00
/*
* Descriptor associated with each open bpf file.
*/
struct bpf_d {
LIST_ENTRY(bpf_d) bd_next; /* Linked list of descriptors */
1994-05-24 10:09:53 +00:00
/*
* Buffer slots: two mbuf clusters buffer the incoming packets.
* The model has three slots. Sbuf is always occupied.
* sbuf (store) - Receive interrupt puts packets here.
* hbuf (hold) - When sbuf is full, put cluster here and
* wakeup read (replace sbuf with fbuf).
* fbuf (free) - When read is done, put cluster here.
* On receiving, if sbuf is full and fbuf is 0, packet is dropped.
*/
caddr_t bd_sbuf; /* store slot */
caddr_t bd_hbuf; /* hold slot */
caddr_t bd_fbuf; /* free slot */
int bd_slen; /* current length of store buffer */
int bd_hlen; /* current length of hold buffer */
int bd_bufsize; /* absolute length of buffers */
struct bpf_if * bd_bif; /* interface descriptor */
u_long bd_rtout; /* Read timeout in 'ticks' */
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
struct bpf_insn *bd_rfilter; /* read filter code */
struct bpf_insn *bd_wfilter; /* write filter code */
#ifdef BPF_JITTER
bpf_jit_filter *bd_bfilter; /* binary filter code */
#endif
1994-05-24 10:09:53 +00:00
u_long bd_rcount; /* number of packets received */
u_long bd_dcount; /* number of packets dropped */
u_char bd_promisc; /* true if listening promiscuously */
u_char bd_state; /* idle, waiting, or timed out */
u_char bd_immediate; /* true to return on packet arrival */
int bd_hdrcmplt; /* false to fill in src lladdr automatically */
int bd_seesent; /* true if bpf should see sent packets */
int bd_async; /* non-zero if packet reception should generate signal */
int bd_sig; /* signal to send upon packet reception */
struct sigio * bd_sigio; /* information for async I/O */
1994-05-24 10:09:53 +00:00
#if BSD < 199103
u_char bd_selcoll; /* true if selects collide */
int bd_timedout;
struct thread * bd_selthread; /* process that last selected us */
1994-05-24 10:09:53 +00:00
#else
u_char bd_pad; /* explicit alignment */
struct selinfo bd_sel; /* bsd select info */
#endif
struct mtx bd_mtx; /* mutex for this descriptor */
struct callout bd_callout; /* for BPF timeouts with select */
Modify the MAC Framework so that instead of embedding a (struct label) in various kernel objects to represent security data, we embed a (struct label *) pointer, which now references labels allocated using a UMA zone (mac_label.c). This allows the size and shape of struct label to be varied without changing the size and shape of these kernel objects, which become part of the frozen ABI with 5-STABLE. This opens the door for boot-time selection of the number of label slots, and hence changes to the bound on the number of simultaneous labeled policies at boot-time instead of compile-time. This also makes it easier to embed label references in new objects as required for locking/caching with fine-grained network stack locking, such as inpcb structures. This change also moves us further in the direction of hiding the structure of kernel objects from MAC policy modules, not to mention dramatically reducing the number of '&' symbols appearing in both the MAC Framework and MAC policy modules, and improving readability. While this results in minimal performance change with MAC enabled, it will observably shrink the size of a number of critical kernel data structures for the !MAC case, and should have a small (but measurable) performance benefit (i.e., struct vnode, struct socket) do to memory conservation and reduced cost of zeroing memory. NOTE: Users of MAC must recompile their kernel and all MAC modules as a result of this change. Because this is an API change, third party MAC modules will also need to be updated to make less use of the '&' symbol. Suggestions from: bmilekic Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2003-11-12 03:14:31 +00:00
struct label *bd_label; /* MAC label for descriptor */
u_long bd_fcount; /* number of packets which matched filter */
pid_t bd_pid; /* PID which created descriptor */
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
int bd_locked; /* true if descriptor is locked */
1994-05-24 10:09:53 +00:00
};
/* Values for bd_state */
#define BPF_IDLE 0 /* no select in progress */
#define BPF_WAITING 1 /* waiting for read timeout in select */
#define BPF_TIMED_OUT 2 /* read timeout has expired in select */
#define BPFD_LOCK(bd) mtx_lock(&(bd)->bd_mtx)
#define BPFD_UNLOCK(bd) mtx_unlock(&(bd)->bd_mtx)
#define BPFD_LOCK_ASSERT(bd) do { \
mtx_assert(&(bd)->bd_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
/* Test whether a BPF is ready for read(). */
#define bpf_ready(bd) \
((bd)->bd_hlen != 0 || \
(((bd)->bd_immediate || (bd)->bd_state == BPF_TIMED_OUT) && \
(bd)->bd_slen != 0))
/*
* External representation of the bpf descriptor
*/
struct xbpf_d {
u_char bd_promisc;
u_char bd_immediate;
int bd_hdrcmplt;
int bd_seesent;
int bd_async;
u_long bd_rcount;
u_long bd_dcount;
u_long bd_fcount;
int bd_sig;
int bd_slen;
int bd_hlen;
int bd_bufsize;
pid_t bd_pid;
char bd_ifname[IFNAMSIZ];
Introduce two new ioctl(2) commands, BIOCLOCK and BIOCSETWF. These commands enhance the security of bpf(4) by further relinquishing the privilege of the bpf(4) consumer (assuming the ioctl commands are being implemented). Once BIOCLOCK is executed, the device becomes locked which prevents the execution of ioctl(2) commands which can change the underly parameters of the bpf(4) device. An example might be the setting of bpf(4) filter programs or attaching to different network interfaces. BIOCSETWF can be used to set write filters for outgoing packets. Currently if a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used as a raw socket, regardless of consumer's UID. Write filters give users the ability to constrain which packets can be sent through the bpf(4) descriptor. These features are currently implemented by a couple programs which came from OpenBSD, such as the new dhclient and pflogd. -Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify whether a read or write filter is to be set. -Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the filter program on the mbuf data once we move the packet in from user-space. -Rather than execute two uiomove operations, (one for the link header and the other for the packet data), execute one and manually copy the linker header into the sockaddr structure via bcopy. -Restructure bpf_setf to compensate for write filters, as well as read. -Adjust bpf(4) stats structures to include a bd_locked member. It should be noted that the FreeBSD and OpenBSD implementations differ a bit in the sense that we unconditionally enforce the lock, where OpenBSD enforces it only if the calling credential is not root. Idea from: OpenBSD Reviewed by: mlaier
2005-08-22 19:35:48 +00:00
int bd_locked;
};
#define BPFIF_LOCK(bif) mtx_lock(&(bif)->bif_mtx)
#define BPFIF_UNLOCK(bif) mtx_unlock(&(bif)->bif_mtx)
1994-08-21 05:11:48 +00:00
#endif