mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Code Issues Releases Activity
3a371f32b3
freebsd/sys/dev/acpica/acpi_pcib_acpi.c

292 lines
9.0 KiB
C
Raw Normal View History

Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
#include <sys/malloc.h>
#include <sys/kernel.h>
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
#include "acpi.h"
#include <dev/acpica/acpivar.h>
#include <machine/pci_cfgreg.h>
#include <pci/pcivar.h>
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
#include <pci/pcib_private.h>
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
#include "pcib_if.h"
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
#include <dev/acpica/acpi_pcibvar.h>
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
/*
* Hooks for the ACPI CA debugging infrastructure
*/
Update for new debug layer constant names in the ACPI CA 20010615 import.
2001-06-29 20:32:29 +00:00
#define _COMPONENT ACPI_BUS
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
ACPI_MODULE_NAME("PCI_ACPI")
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
device_t ap_dev;
ACPI_HANDLE ap_handle;
int ap_segment; /* analagous to Alpha 'hose' */
int ap_bus; /* bios-assigned bus number */
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
ACPI_BUFFER ap_prt; /* interrupt routing table */
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
};
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static int acpi_pcib_acpi_probe(device_t bus);
static int acpi_pcib_acpi_attach(device_t bus);
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
static int acpi_pcib_acpi_resume(device_t bus);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
static int acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result);
static int acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value);
static u_int32_t acpi_pcib_read_config(device_t dev, int bus, int slot, int func, int reg, int bytes);
static void acpi_pcib_write_config(device_t dev, int bus, int slot, int func, int reg,
u_int32_t data, int bytes);
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static int acpi_pcib_acpi_route_interrupt(device_t pcib,
device_t dev, int pin);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static device_method_t acpi_pcib_acpi_methods[] = {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/* Device interface */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(device_probe, acpi_pcib_acpi_probe),
DEVMETHOD(device_attach, acpi_pcib_acpi_attach),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
DEVMETHOD(device_resume, acpi_pcib_acpi_resume),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
DEVMETHOD(bus_write_ivar, acpi_pcib_write_ivar),
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* pcib interface */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(pcib_maxslots, pcib_maxslots),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
DEVMETHOD(pcib_read_config, acpi_pcib_read_config),
DEVMETHOD(pcib_write_config, acpi_pcib_write_config),
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DEVMETHOD(pcib_route_interrupt, acpi_pcib_acpi_route_interrupt),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{0, 0}
};
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
static driver_t acpi_pcib_acpi_driver = {
"pcib",
acpi_pcib_acpi_methods,
sizeof(struct acpi_hpcib_softc),
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
};
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
DRIVER_MODULE(acpi_pcib, acpi, acpi_pcib_acpi_driver, pcib_devclass, 0, 0);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_probe(device_t dev)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
if ((acpi_get_type(dev) == ACPI_TYPE_DEVICE) &&
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
!acpi_disabled("pci") &&
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
acpi_MatchHid(dev, "PNP0A03")) {
Make sure that ACPI PCI driver probe routine call pci_cfgregopen() before start accessing PCI config space. Reviewed by: jhb
2002-10-05 02:16:49 +00:00
if (!pci_cfgregopen())
return(ENXIO);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/*
* Set device description
*/
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
device_set_desc(dev, "ACPI Host-PCI bridge");
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
return(0);
}
return(ENXIO);
}
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_attach(device_t dev)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
ACPI_STATUS status;
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
uint addr, slot, func, busok;
uint8_t busno;
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
Brutally deal with __func__ being 'const char *' on gcc-3.1.
2002-05-19 06:16:47 +00:00
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
sc = device_get_softc(dev);
sc->ap_dev = dev;
sc->ap_handle = acpi_get_handle(dev);
/*
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
* Get our base bus number by evaluating _BBN.
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
* If this doesn't work, we assume we're bus number 0.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*
* XXX note that it may also not exist in the case where we are
* meant to use a private configuration space mechanism for this bus,
* so we should dig out our resources and check to see if we have
* anything like that. How do we do this?
Update to work with the new ACPI CA snapshot. - Use ACPI_PHYSICAL_ADDRESS - RSDT -> XSDT - FACP -> FADT - No APIC table support - Don't install a global EC handler; this has bad side-effects (it invokes _REG in *all* EC spaces in the namespace!) - Check for PCI bus instances already existing before adding them
2000-12-01 10:18:57 +00:00
* XXX If we have the requisite information, and if we don't think the
* default PCI configuration space handlers can deal with this bus,
* we should attach our own handler.
* XXX invoke _REG on this for the PCI config space address space?
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
* XXX It seems many BIOS's with multiple Host-PCI bridges do not set
* _BBN correctly. They set _BBN to zero for all bridges. Thus,
* if _BBN is zero and pcib0 already exists, we try to read our
* bus number from the configuration registers at address _ADR.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*/
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
status = acpi_EvaluateInteger(sc->ap_handle, "_BBN", &sc->ap_bus);
if (ACPI_FAILURE(status)) {
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
if (status != AE_NOT_FOUND) {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not evaluate _BBN - %s\n",
AcpiFormatException(status));
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VALUE(ENXIO);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
} else {
/* if it's not found, assume 0 */
sc->ap_bus = 0;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
}
/*
* If the bus is zero and pcib0 already exists, read the bus number
* via PCI config space.
*/
busok = 1;
if (sc->ap_bus == 0 && devclass_get_device(pcib_devclass, 0) != dev) {
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
busok = 0;
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
status = acpi_EvaluateInteger(sc->ap_handle, "_ADR", &addr);
if (ACPI_FAILURE(status)) {
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
if (status != AE_NOT_FOUND) {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not evaluate _ADR - %s\n",
AcpiFormatException(status));
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
return_VALUE(ENXIO);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
} else
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not determine config space address\n");
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
} else {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
/* XXX: We assume bus 0. */
slot = addr >> 16;
func = addr & 0xffff;
if (bootverbose)
device_printf(dev, "reading config registers from 0:%d:%d\n",
slot, func);
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
if (host_pcib_get_busno(pci_cfgregread, 0, slot, func, &busno) == 0)
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
device_printf(dev, "could not read bus number from config space\n");
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
else {
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
sc->ap_bus = busno;
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit. Submitted by: marcel (1) Approved by: re (rwatson)
2002-11-25 21:55:04 +00:00
busok = 1;
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
}
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER. Use _ADR as well as _BBN to get our bus number.
2002-02-23 05:27:49 +00:00
}
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround. If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number. Approved by: re
2002-11-22 18:11:13 +00:00
/*
* If nothing else worked, hope that ACPI at least lays out the
* host-PCI bridges in order and that as a result our unit number
* is actually our bus number. There are several reasons this
* might not be true.
*/
if (busok == 0) {
sc->ap_bus = device_get_unit(dev);
device_printf(dev, "trying bus number %d\n", sc->ap_bus);
}
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
/*
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
* Get our segment number by evaluating _SEG
* It's OK for this to not exist.
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
*/
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
if (ACPI_FAILURE(status = acpi_EvaluateInteger(sc->ap_handle, "_SEG", &sc->ap_segment))) {
if (status != AE_NOT_FOUND) {
device_printf(dev, "could not evaluate _SEG - %s\n", AcpiFormatException(status));
return_VALUE(ENXIO);
}
/* if it's not found, assume 0 */
sc->ap_segment = 0;
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_bus));
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled. Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
2002-10-05 02:01:05 +00:00
static int
acpi_pcib_acpi_resume(device_t dev)
{
struct acpi_hpcib_softc *sc = device_get_softc(dev);
return (acpi_pcib_resume(dev, &sc->ap_prt, sc->ap_bus));
}
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
/*
* Support for standard PCI bridge ivars.
*/
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
static int
acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc = device_get_softc(dev);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
switch (which) {
case PCIB_IVAR_BUS:
*result = sc->ap_bus;
return(0);
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
case ACPI_IVAR_HANDLE:
*result = (uintptr_t)sc->ap_handle;
return(0);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
return(ENOENT);
}
static int
acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc = device_get_softc(dev);
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
switch (which) {
case PCIB_IVAR_BUS:
sc->ap_bus = value;
return(0);
}
return(ENOENT);
}
static u_int32_t
acpi_pcib_read_config(device_t dev, int bus, int slot, int func, int reg, int bytes)
{
return(pci_cfgregread(bus, slot, func, reg, bytes));
}
static void
acpi_pcib_write_config(device_t dev, int bus, int slot, int func, int reg, u_int32_t data, int bytes)
{
pci_cfgregwrite(bus, slot, func, reg, data, bytes);
}
static int
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
acpi_pcib_acpi_route_interrupt(device_t pcib, device_t dev, int pin)
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
{
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
struct acpi_hpcib_softc *sc;
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed. Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
2001-07-05 07:20:51 +00:00
/* find the bridge softc */
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc. With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used. Tested on: i386, ia64
2002-08-26 18:30:27 +00:00
sc = device_get_softc(pcib);
return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for: - Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
}
Reference in New Issue Copy Permalink