mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
Code Issues Releases Activity
3e3d9737c7
freebsd/sys/dev/sio/sio_puc.c

129 lines
3.5 KiB
C
Raw Normal View History

Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*-
* Copyright (c) 2002 JF Hay. All rights reserved.
* Copyright (c) 2001 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/module.h>
#include <sys/tty.h>
#include <machine/bus.h>
#include <sys/timepps.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <dev/puc/puc_bus.h>
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
#include <dev/sio/siovar.h>
#include <dev/sio/sioreg.h>
Remove __P.
2002-03-20 02:08:01 +00:00
static int sio_puc_attach(device_t dev);
static int sio_puc_probe(device_t dev);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
static device_method_t sio_puc_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sio_puc_probe),
DEVMETHOD(device_attach, sio_puc_attach),
Add detach methods so we can unload the sio module.
2003-12-27 19:47:10 +00:00
DEVMETHOD(device_detach, siodetach),
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{ 0, 0 }
};
static driver_t sio_puc_driver = {
sio_driver_name,
sio_puc_methods,
0,
};
Add sio_puc_kludge_unit() to stop sio devices originating from puc stomping on the units intended for the motherboard sio ports. This is no real substitute for the not-yet-committed device wiring enhancements. Code taken from sio's pci attachment.
2007-11-30 21:36:12 +00:00
/*
* Don't cut and paste this to other drivers. It is a horrible kludge
* which will fail to work and also be unnecessary in future versions.
*/
static void
sio_puc_kludge_unit(device_t dev)
{
devclass_t dc;
int err;
int start;
int unit;
unit = 0;
start = 0;
while (resource_int_value("sio", unit, "port", &start) == 0 &&
start > 0)
unit++;
if (device_get_unit(dev) < unit) {
dc = device_get_devclass(dev);
while (devclass_get_device(dc, unit))
unit++;
device_printf(dev, "moving to sio%d\n", unit);
err = device_set_unit(dev, unit); /* EVIL DO NOT COPY */
if (err)
device_printf(dev, "error moving device %d\n", err);
}
}
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
static int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
sio_puc_attach(device_t dev)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Make 'rclk' a uintptr_t to quiet warnings.
2002-11-07 22:22:10 +00:00
uintptr_t rclk;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
if (BUS_READ_IVAR(device_get_parent(dev), dev, PUC_IVAR_CLOCK,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
&rclk) != 0)
rclk = DEFAULT_RCLK;
Add sio_puc_kludge_unit() to stop sio devices originating from puc stomping on the units intended for the motherboard sio ports. This is no real substitute for the not-yet-committed device wiring enhancements. Code taken from sio's pci attachment.
2007-11-30 21:36:12 +00:00
sio_puc_kludge_unit(dev);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
return (sioattach(dev, 0, rclk));
}
static int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
sio_puc_probe(device_t dev)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
device_t parent;
uintptr_t rclk, type;
int error;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
parent = device_get_parent(dev);
if (BUS_READ_IVAR(parent, dev, PUC_IVAR_TYPE, &type))
return (ENXIO);
if (type != PUC_TYPE_SERIAL)
return (ENXIO);
if (BUS_READ_IVAR(parent, dev, PUC_IVAR_CLOCK, &rclk))
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
rclk = DEFAULT_RCLK;
Add pc98 support.
2002-03-08 12:41:32 +00:00
#ifdef PC98
SET_FLAG(dev, SET_IFTYPE(COM_IF_NS16550));
#endif
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
error = sioprobe(dev, 0, rclk, 1);
return ((error > 0) ? error : BUS_PROBE_LOW_PRIORITY);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
DRIVER_MODULE(sio, puc, sio_puc_driver, sio_devclass, 0, 0);
Reference in New Issue Copy Permalink