mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
415e46824c
freebsd/share/man/man4/udbp.4

116 lines
3.4 KiB
Groff
Raw Normal View History

The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.\" Copyright (c) 1999
Update @freebsd.org email addresses to @FreeBSD.org as is the precedent.
2000-10-26 15:30:44 +00:00
.\" Nick Hibma <n_hibma@FreeBSD.org>. All rights reserved.
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
Remove bogus advertising clauses. Reviewed by: n_hibma, roberto
2002-10-30 22:27:54 +00:00
.\" 3. Neither the name of the author nor the names of any co-contributors
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY NICK HIBMA AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL NICK HIBMA OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
Fixed the misplaced $FreeBSD$.
2005-02-09 18:07:17 +00:00
.\" $FreeBSD$
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.\"
.Dd April 30, 2000
.Dt UDBP 4
Clear the extraneous Os argument, which survived rev 1.3.
2000-07-20 11:46:51 +00:00
.Os
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Sh NAME
.Nm udbp
.Nd USB Double Bulk Pipe driver
.Sh SYNOPSIS
.Cd "device udbp"
.Sh DESCRIPTION
The
.Nm
General clean-up [1/1]: whitespace
2000-07-20 11:45:56 +00:00
driver provides support for host-to-host cables
that contain at least two bulk pipes (one for each direction),
for example
the EzLink cable and the NetChip 1080 chip.
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Pp
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.\" XXX The description of how to add netgraph to the kernel
.\" is out of place here. It should be limited to the
.\" netgraph(4) manpage only. However, that page does
.\" not yet give instructions for kldload(8) for the
.\" clueless. Working on it -- sheldonh
It requires
.Xr netgraph 4
Typo: s/avalable/available/ MFC after: 3 days
2002-03-16 18:02:30 +00:00
to be available.
General clean-up [1/1]: whitespace
2000-07-20 11:45:56 +00:00
This can be done either by adding
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Cd "options NETGRAPH"
to your kernel configuration file, or alternatively loading
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Xr netgraph 4
as a module, either from
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Pa /boot/loader.conf
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
or from the command line, before the
.Nm
module.
mdoc(7) police: use certified section headers wherever possible.
2000-11-17 11:44:16 +00:00
.Sh EXAMPLES
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Dl options NETGRAPH
.Dl device udbp
.Pp
Add the
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Nm
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
driver to the kernel.
.Pp
.Dl kldload netgraph
.Dl kldload udbp
.Pp
Load the
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Xr netgraph 4
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
module and then the
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Nm
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
driver.
.Pp
.Dl ngctl mkpeer udbp0: iface data inet
.Dl ifconfig ng0 10.0.0.1 10.0.0.2
.Pp
General clean-up [1/1]: whitespace
2000-07-20 11:45:56 +00:00
Create a new network interface node
and connect its inet hook to the data hook of the
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Nm
node.
.Xr ifconfig 8
configures the resulting network interface ng0 with a local
General clean-up [1/1]: whitespace
2000-07-20 11:45:56 +00:00
IP address of 10.0.0.1 and a remote IP address of 10.0.0.2.
On the remote host, the two
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
IP addresses should of course be reversed.
.Sh SEE ALSO
.Xr netgraph 4 ,
mdoc(7) police: sort xrefs.
2001-07-04 14:52:23 +00:00
.Xr ng_iface 4 ,
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Xr ohci 4 ,
.Xr uhci 4 ,
.Xr usb 4 ,
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Xr ngctl 8
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Sh HISTORY
The
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Nm
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
driver first appeared in
.Fx 5.0 .
.Sh AUTHORS
mdoc(7) police: do not split author names in the AUTHORS section.
2000-11-22 09:35:58 +00:00
.An -nosplit
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
The
General clean-up [0/1]: content Clear extraneous Nm arguments. Clarify some English. Mark netgraph and ifconfig up as a cross-reference. Remove apostrophe from a genitive ``its''.
2000-07-20 11:43:40 +00:00
.Nm
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
driver was written by
.An Doug Ambrisko Aq ambrisko@whistle.com ,
Update @freebsd.org email addresses to @FreeBSD.org as is the precedent.
2000-10-26 15:30:44 +00:00
.An Julian Elischer Aq julian@FreeBSD.org
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
and
Update @freebsd.org email addresses to @FreeBSD.org as is the precedent.
2000-10-26 15:30:44 +00:00
.An Nick Hibma Aq n_hibma@FreeBSD.org .
The USB double bulk pipe driver (Host to host cables). Currently there are two supported chips, the NetChip 1080 (only prototypes available) and the EzLink cable. Any other cable should be supported however as they are all very much alike (there is a difference between them wrt performance). It uses Netgraph. This driver was mostly written by Doug Ambrisko and Julian Elischer and I would like to thank Whistle for yet another contribution. And my aplogies to them for me sitting on the driver for so long (2 months). Also, many thanks to Reid Augustin from NetChip for providing me with a prototype of their 1080 chip. Be aware of the fact that this driver is very immature and has only been tested very lightly. If someone feels like learning about Netgraph however this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
.Pp
This manual page was written by
Update @freebsd.org email addresses to @FreeBSD.org as is the precedent.
2000-10-26 15:30:44 +00:00
.An Nick Hibma Aq n_hibma@FreeBSD.org .
Reference in New Issue Copy Permalink