mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
487b46173d
freebsd/lib/libc/stdlib/Makefile.inc

54 lines
2.2 KiB
PHP
Raw Normal View History

Changed all paths to be relative to src/lib instead of src/lib/libc so that all these makefiles can be used to build libc_r too. Added .if ${LIB} == "c" tests to restrict man page builds to libc to avoid needlessly building them with libc_r too. Split libc Makefile into Makefile and Makefile.inc to allow the libc_r Makefile to include Makefile.inc too.
1997-05-03 03:50:06 +00:00
# from @(#)Makefile.inc 8.3 (Berkeley) 2/4/95
$Id$ -> $FreeBSD$
1999-08-28 00:22:10 +00:00
# $FreeBSD$
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
# machine-independent stdlib sources
Replace use of ${.CURDIR} by ${LIBC_SRCTOP} and define ${LIBC_SRCTOP} if not already defined. This allows building libc from outside of lib/libc using a reach-over makefile. A typical use-case is to build a standard ILP32 version and a COMPAT32 version in a single iteration by building the COMPAT32 version using a reach-over makefile. Obtained from: Juniper Networks, Inc.
2014-03-04 02:19:39 +00:00
.PATH: ${LIBC_SRCTOP}/${LIBC_ARCH}/stdlib ${LIBC_SRCTOP}/stdlib
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
Add a64l(), l64a(), and l64a_r() XSI extentions. These functions convert between a 32-bit integer and a radix-64 ASCII string. The l64a_r() function is a NetBSD addition. PR: 51209 (based on submission, but very different) Reviewed by: bde, ru
2005-12-24 22:37:59 +00:00
MISRCS+=_Exit.c a64l.c abort.c abs.c atexit.c atof.c atoi.c atol.c atoll.c \
Add __cxa_thread_atexit(3) API implementation. This is the backing feature to implement C++11 thread storage duration specified by the thread_local keyword. A destructor for given thread-local object is registered to be executed at the thread termination time using __cxa_thread_atexit(). Libc calls the __cxa_thread_calls_dtors() during exit(3), before finalizers and atexit functions, and libthr calls the function at the thread termination time, after the stack unwinding and thread-specific key destruction. There are several uncertainties in the API which lacks a formal specification. Among them: - is it allowed to register destructors during destructing; we allow, but limiting the nesting level. If too many iterations detected, a diagnostic is issued to stderr and thread forcibly terminates for now. - how to handle destructors which belong to an unloading dso; for now, we ignore destructor calls for such entries, and issue a diagnostic. Linux does prevent dso unload until all threads with destructors from the dso terminated. It is supposed that the diagnostics allow to detect real-world applications relying on the above details and possibly adjust our implementation. Right now the choices were to provide the slim API (but that rarely stands the practice test). Tests are added to check generic functionality and to specify some of the above implementation choices. Submitted by: Mahdi Mokhtari <mokhi64_gmail.com> Reviewed by: theraven Discussed with: dim (detection of -std=c++11 supoort for tests) Sponsored by: The FreeBSD Foundation (my involvement) MFC after: 2 weeks Differential revisions: https://reviews.freebsd.org/D7224, https://reviews.freebsd.org/D7427
2016-08-06 13:32:40 +00:00
bsearch.c cxa_thread_atexit.c div.c exit.c getenv.c getopt.c getopt_long.c \
Replace implementation of hsearch() by one that scales. Traditionally the hcreate() function creates a hash table that uses chaining, using a fixed user-provided size. The problem with this approach is that this often either wastes memory (table too big) or yields bad performance (table too small). For applications it may not always be easy to estimate the right hash table size. A fixed number only increases performance compared to a linked list by a constant factor. This problem can be solved easily by dynamically resizing the hash table. If the size of the hash table is at least doubled, this has no negative on the running time complexity. If a dynamically sized hash table is used, we can also switch to using open addressing instead of chaining, which has the advantage of just using a single allocation for the entire table, instead of allocating many small objects. Finally, a problem with the existing implementation is that its deterministic algorithm for hashing makes it possible to come up with fixed patterns to trigger an excessive number of collisions. We can easily solve this by using FNV-1a as a hashing algorithm in combination with a randomly generated offset basis. Measurements have shown that this implementation is about 20-25% faster than the existing implementation (even if the existing implementation is given an excessive number of buckets). Though it allocates more memory through malloc() than the old implementation (between 4-8 pointers per used entry instead of 3), process memory use is similar to the old implementation as if the estimated size was underestimated by a factor 10. This is due to the fact that malloc() needs to perform less bookkeeping. Reviewed by: jilles, pfg Obtained from: https://github.com/NuxiNL/cloudlibc Differential Revision: https://reviews.freebsd.org/D4644
2015-12-27 07:50:11 +00:00
getsubopt.c hcreate.c hcreate_r.c hdestroy_r.c heapsort.c heapsort_b.c \
hsearch_r.c imaxabs.c imaxdiv.c \
Import jemalloc 9ef7f5dc34ff02f50d401e41c8d9a4a928e7c2aa (dev branch, prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc. The code being imported by this commit diverged from lib/libc/stdlib/malloc.c in March 2010, which means that a portion of the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries for all subsequent releases.
2012-04-17 07:22:14 +00:00
insque.c l64a.c labs.c ldiv.c llabs.c lldiv.c lsearch.c \
Add support for some block functions that come from OS X. These are intended to build with any C compiler. Reviewed by: pfg MFC after: 3 weeks
2014-04-02 16:07:48 +00:00
merge.c mergesort_b.c ptsname.c qsort.c qsort_r.c quick_exit.c \
radixsort.c rand.c \
Import reallocarray(3) from OpenBSD Add a manpage for it, assign the copyright to the OpenBSD project on it since it is mostly copy/paste from OpenBSD manpage. style(9) fixes Differential Revision: https://reviews.freebsd.org/D2420 Reviewed by: kib
2015-05-01 18:32:16 +00:00
random.c reallocarray.c reallocf.c realpath.c remque.c strfmon.c \
strtoimax.c \
Significantly reduce the memory leak as noted in BUGS section for setenv(3) by tracking the size of the memory allocated instead of using strlen() on the current value. Convert all calls to POSIX from historic BSD API: - unsetenv returns an int. - putenv takes a char * instead of const char *. - putenv no longer makes a copy of the input string. - errno is set appropriately for POSIX. Exceptions involve bad environ variable and internal initialization code. These both set errno to EFAULT. Several patches to base utilities to handle the POSIX changes from Andrey Chernov's previous commit. A few I re-wrote to use setenv() instead of putenv(). New regression module for tools/regression/environ to test these functions. It also can be used to test the performance. Bump __FreeBSD_version to 700050 due to API change. PR: kern/99826 Approved by: wes Approved by: re (kensmith)
2007-07-04 00:00:41 +00:00
strtol.c strtoll.c strtoq.c strtoul.c strtonum.c strtoull.c \
strtoumax.c strtouq.c system.c tdelete.c tfind.c tsearch.c twalk.c
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
Replace use of ${.CURDIR} by ${LIBC_SRCTOP} and define ${LIBC_SRCTOP} if not already defined. This allows building libc from outside of lib/libc using a reach-over makefile. A typical use-case is to build a standard ILP32 version and a COMPAT32 version in a single iteration by building the COMPAT32 version using a reach-over makefile. Obtained from: Juniper Networks, Inc.
2014-03-04 02:19:39 +00:00
SYM_MAPS+= ${LIBC_SRCTOP}/stdlib/Symbol.map
Add each directory's symbol map file to SYM_MAPS.
2006-03-13 01:15:01 +00:00
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
# machine-dependent stdlib sources
Replace use of ${.CURDIR} by ${LIBC_SRCTOP} and define ${LIBC_SRCTOP} if not already defined. This allows building libc from outside of lib/libc using a reach-over makefile. A typical use-case is to build a standard ILP32 version and a COMPAT32 version in a single iteration by building the COMPAT32 version using a reach-over makefile. Obtained from: Juniper Networks, Inc.
2014-03-04 02:19:39 +00:00
.sinclude "${LIBC_SRCTOP}/${LIBC_ARCH}/stdlib/Makefile.inc"
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
Import jemalloc 9ef7f5dc34ff02f50d401e41c8d9a4a928e7c2aa (dev branch, prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc. The code being imported by this commit diverged from lib/libc/stdlib/malloc.c in March 2010, which means that a portion of the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries for all subsequent releases.
2012-04-17 07:22:14 +00:00
MAN+= a64l.3 abort.3 abs.3 alloca.3 atexit.3 atof.3 \
Add aligned_alloc(3). The C11 folks reinvented the wheel by introducing an aligned version of malloc(3) called aligned_alloc(3), instead of posix_memalign(3). Instead of returning the allocation by reference, it returns the address, just like malloc(3). Reviewed by: jasone@
2012-01-09 06:36:28 +00:00
atoi.3 atol.3 at_quick_exit.3 bsearch.3 \
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
div.3 exit.3 getenv.3 getopt.3 getopt_long.3 getsubopt.3 \
Implement POSIX grantpt(3) functionality, and add a pt_chown utility (akin to Solaris, it is in /usr/libexec) to perform the handing over of tty nodes to the user being granted the pty. Submitted by: Ryan Younce <ryany@pobox.com> Reviewed by: security-officer@, standards@, mike@
2003-01-02 20:44:41 +00:00
hcreate.3 imaxabs.3 imaxdiv.3 insque.3 labs.3 ldiv.3 llabs.3 lldiv.3 \
Import jemalloc 9ef7f5dc34ff02f50d401e41c8d9a4a928e7c2aa (dev branch, prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc. The code being imported by this commit diverged from lib/libc/stdlib/malloc.c in March 2010, which means that a portion of the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries for all subsequent releases.
2012-04-17 07:22:14 +00:00
lsearch.3 memory.3 ptsname.3 qsort.3 \
Implement quick_exit() / at_quick_exit() from C++11 / C1x. Also add a __noreturn macro and modify the other exiting functions to use it. The __noreturn macro, unlike __dead2, must be used BEFORE the function. This is in line with the C and C++ specifications that place _Noreturn (c1x) and [[noreturn]] (C++11) in front of the functions. As with __dead2, this macro falls back to using the GCC attribute. Unfortunately, clang currently sets the same value for the C version macro in C99 and C1x modes, so these functions are hidden by default. At some point before 10.0, I need to go through the headers and clean up the C1x / C++11 visibility. Reviewed by: brooks (mentor)
2011-12-07 15:25:48 +00:00
quick_exit.3 \
Import reallocarray(3) from OpenBSD Add a manpage for it, assign the copyright to the OpenBSD project on it since it is mostly copy/paste from OpenBSD manpage. style(9) fixes Differential Revision: https://reviews.freebsd.org/D2420 Reviewed by: kib
2015-05-01 18:32:16 +00:00
radixsort.3 rand.3 random.3 reallocarray.3 reallocf.3 \
Import of OpenBSD's strtonum(3) which is a nicer version of strtoll(3) providing proper error checking and other improvements. Obtained from: OpenBSD Requested by: flz (to port Open[BGP|OSPF]D) MFC after: 3 days
2006-03-14 16:57:30 +00:00
realpath.3 strfmon.3 strtod.3 strtol.3 strtonum.3 strtoul.3 system.3 \
tsearch.3
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
Add a64l(), l64a(), and l64a_r() XSI extentions. These functions convert between a 32-bit integer and a radix-64 ASCII string. The l64a_r() function is a NetBSD addition. PR: 51209 (based on submission, but very different) Reviewed by: bde, ru
2005-12-24 22:37:59 +00:00
MLINKS+=a64l.3 l64a.3 a64l.3 l64a_r.3
Add atoll(3) to conform POSIX and C99
2001-11-28 01:22:08 +00:00
MLINKS+=atol.3 atoll.3
Implement C99's _Exit() interface. Implement a version of qsort that provides a thunk to the comparison function. Update manual pages.
2002-09-10 02:04:49 +00:00
MLINKS+=exit.3 _Exit.3
Sorted lists.
1997-10-21 08:41:15 +00:00
MLINKS+=getenv.3 putenv.3 getenv.3 setenv.3 getenv.3 unsetenv.3
Add getopt_long_only() from OpenBSD and other OpenBSD cleanups PR: 63173 Submitted by: Marius Strobl <marius@alchemy.franken.de>
2004-02-24 08:07:26 +00:00
MLINKS+=getopt_long.3 getopt_long_only.3
Add new, from scratch implementation of hsearch() et al that actually works. Obtained from: NetBSD MFC after: 1 month
2001-05-15 07:08:20 +00:00
MLINKS+=hcreate.3 hdestroy.3 hcreate.3 hsearch.3
Add re-entrant versions of the hash functions based on the GNU api. While testing this I found a conformance issue in hdestroy() that will be fixed in a subsequent commit. Obtained from: NetBSD (hcreate.c, CVS Rev. 1.7)
2014-07-21 15:22:48 +00:00
MLINKS+=hcreate.3 hcreate_r.3 hcreate.3 hdestroy_r.3 hcreate.3 hsearch_r.3
- Remove the old insque() and remque() functions and their manual page from the compatibility library. - Add new implementations of insque() and remque() which conform to IEEE Std 1003.1-2001 to libc. Add a new manual page for them and connect them to the build. - Add the prototypes of insque() and remque() to the search.h header.
2002-10-16 14:00:46 +00:00
MLINKS+=insque.3 remque.3
- Remove the lsearch() and lfind() functions and their manpage from the compatibility library libcompat. - Add new implementations of lsearch() and lfind() which conform to IEEE Std 1003.1-2001 to libc. Add a new manual page for them and add them to the makefile. - Add function prototypes for lsearch() and lfind() to the search.h header.
2002-10-16 14:29:23 +00:00
MLINKS+=lsearch.3 lfind.3
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
MLINKS+=ptsname.3 grantpt.3 ptsname.3 unlockpt.3
Implement C99's _Exit() interface. Implement a version of qsort that provides a thunk to the comparison function. Update manual pages.
2002-09-10 02:04:49 +00:00
MLINKS+=qsort.3 heapsort.3 qsort.3 mergesort.3 qsort.3 qsort_r.3
Add sranddev.3 to MLINKS
2001-04-23 11:11:00 +00:00
MLINKS+=rand.3 rand_r.3 rand.3 srand.3 rand.3 sranddev.3
Add srandomdev.3 link
1997-03-23 23:12:59 +00:00
MLINKS+=random.3 initstate.3 random.3 setstate.3 random.3 srandom.3 \
random.3 srandomdev.3
Link radixsort(3) to sradixsort(3), make the latter appear in the whatis(1) output.
2004-05-12 08:13:40 +00:00
MLINKS+=radixsort.3 sradixsort.3
Add more locale-specific functions to the relevant man pages and Makefiles: - libc/stdtime/strftime.3 - libc/stdtime/strptime.3 - libc/stdlib/strfmon.3 Reviewed by: theraven Approved by: gabor (mentor)
2012-06-25 21:51:40 +00:00
MLINKS+=strfmon.3 strfmon_l.3
MFp4: Link strtof.3 and strtold.3 to strtod.3.
2003-04-05 07:33:46 +00:00
MLINKS+=strtod.3 strtof.3 strtod.3 strtold.3
Implement strtoimax() and strtoumax()
2001-11-28 03:37:06 +00:00
MLINKS+=strtol.3 strtoll.3 strtol.3 strtoq.3 strtol.3 strtoimax.3
MLINKS+=strtoul.3 strtoull.3 strtoul.3 strtouq.3 strtoul.3 strtoumax.3
Make tdelete(3), tfind(3), and twalk(3) links to tsearch(3). Approved by: nik
2001-03-15 01:53:17 +00:00
MLINKS+=tsearch.3 tdelete.3 tsearch.3 tfind.3 tsearch.3 twalk.3
Reference in New Issue Copy Permalink