1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
freebsd/sys/net/netisr.c

363 lines
10 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001,2002,2003 Jonathan Lemon <jlemon@FreeBSD.org>
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_device_polling.h"
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
#include "opt_net.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/rtprio.h>
#include <sys/systm.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/random.h>
#include <sys/resourcevar.h>
#include <sys/sysctl.h>
#include <sys/unistd.h>
#include <machine/atomic.h>
#include <machine/cpu.h>
#include <machine/stdarg.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/if_var.h>
#include <net/netisr.h>
2004-07-18 21:50:22 +00:00
/*
* debug_mpsafenet controls network subsystem-wide use of the Giant lock,
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
* from system calls down to interrupt handlers. It can be changed only via
* a tunable at boot, not at run-time, due to the complexity of unwinding.
* The compiled default is set via a kernel option; right now, the default
* unless otherwise specified is to run the network stack without Giant.
*/
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
#ifdef NET_WITH_GIANT
int debug_mpsafenet = 0;
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
#else
int debug_mpsafenet = 1;
#endif
int debug_mpsafenet_toolatetotwiddle = 0;
TUNABLE_INT("debug.mpsafenet", &debug_mpsafenet);
SYSCTL_INT(_debug, OID_AUTO, mpsafenet, CTLFLAG_RD, &debug_mpsafenet, 0,
"Enable/disable MPSAFE network support");
volatile unsigned int netisr; /* scheduling bits for network */
struct netisr {
netisr_t *ni_handler;
struct ifqueue *ni_queue;
int ni_flags;
} netisrs[32];
static void *net_ih;
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
/*
* Not all network code is currently capable of running MPSAFE; however,
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
* most of it is. Since those sections that are not are generally optional
* components not shipped with default kernels, we provide a basic way to
* determine whether MPSAFE operation is permitted: based on a default of
* yes, we permit non-MPSAFE components to use a registration call to
* identify that they require Giant. If the system is early in the boot
* process still, then we change the debug_mpsafenet setting to choose a
* non-MPSAFE execution mode (degraded). If it's too late for that (since
* the setting cannot be changed at run time), we generate a console warning
* that the configuration may be unsafe.
*/
static int mpsafe_warn_count;
/*
* Function call implementing registration of a non-MPSAFE network component.
*/
void
net_warn_not_mpsafe(const char *component)
{
/*
* If we're running with Giant over the network stack, there is no
* problem.
*/
if (!debug_mpsafenet)
return;
/*
* If it's not too late to change the MPSAFE setting for the network
* stack, do so now. This effectively suppresses warnings by
* components registering later.
*/
if (!debug_mpsafenet_toolatetotwiddle) {
debug_mpsafenet = 0;
printf("WARNING: debug.mpsafenet forced to 0 as %s requires "
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
"Giant\n", component);
return;
}
/*
* We must run without Giant, so generate a console warning with some
* information with what to do about it. The system may be operating
* unsafely, however.
*/
printf("WARNING: Network stack Giant-free, but %s requires Giant.\n",
component);
if (mpsafe_warn_count == 0)
printf(" Consider adding 'options NET_WITH_GIANT' or "
"setting debug.mpsafenet=0\n");
mpsafe_warn_count++;
}
/*
* This sysinit is run after any pre-loaded or compiled-in components have
* announced that they require Giant, but before any modules loaded at
* run-time.
*/
static void
net_mpsafe_toolate(void *arg)
{
debug_mpsafenet_toolatetotwiddle = 1;
if (!debug_mpsafenet)
printf("WARNING: MPSAFE network stack disabled, expect "
"reduced performance.\n");
}
SYSINIT(net_mpsafe_toolate, SI_SUB_SETTINGS, SI_ORDER_ANY, net_mpsafe_toolate,
NULL);
void
legacy_setsoftnet(void)
{
swi_sched(net_ih, 0);
}
void
netisr_register(int num, netisr_t *handler, struct ifqueue *inq, int flags)
{
KASSERT(!(num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs))),
("bad isr %d", num));
netisrs[num].ni_handler = handler;
netisrs[num].ni_queue = inq;
if ((flags & NETISR_MPSAFE) && !debug_mpsafenet)
flags &= ~NETISR_MPSAFE;
netisrs[num].ni_flags = flags;
}
void
netisr_unregister(int num)
{
struct netisr *ni;
KASSERT(!(num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs))),
("bad isr %d", num));
ni = &netisrs[num];
ni->ni_handler = NULL;
if (ni->ni_queue != NULL)
IF_DRAIN(ni->ni_queue);
ni->ni_queue = NULL;
}
struct isrstat {
int isrs_count; /* dispatch count */
int isrs_directed; /* ...directly dispatched */
int isrs_deferred; /* ...queued instead */
int isrs_queued; /* intentionally queueued */
int isrs_drop; /* dropped 'cuz no handler */
int isrs_swi_count; /* swi_net handlers called */
};
static struct isrstat isrstat;
SYSCTL_NODE(_net, OID_AUTO, isr, CTLFLAG_RW, 0, "netisr counters");
static int netisr_direct = 0;
SYSCTL_INT(_net_isr, OID_AUTO, direct, CTLFLAG_RW,
&netisr_direct, 0, "enable direct dispatch");
TUNABLE_INT("net.isr.direct", &netisr_direct);
SYSCTL_INT(_net_isr, OID_AUTO, count, CTLFLAG_RD,
&isrstat.isrs_count, 0, "");
SYSCTL_INT(_net_isr, OID_AUTO, directed, CTLFLAG_RD,
&isrstat.isrs_directed, 0, "");
SYSCTL_INT(_net_isr, OID_AUTO, deferred, CTLFLAG_RD,
&isrstat.isrs_deferred, 0, "");
SYSCTL_INT(_net_isr, OID_AUTO, queued, CTLFLAG_RD,
&isrstat.isrs_queued, 0, "");
SYSCTL_INT(_net_isr, OID_AUTO, drop, CTLFLAG_RD,
&isrstat.isrs_drop, 0, "");
SYSCTL_INT(_net_isr, OID_AUTO, swi_count, CTLFLAG_RD,
&isrstat.isrs_swi_count, 0, "");
/*
* Process all packets currently present in a netisr queue. Used to
* drain an existing set of packets waiting for processing when we
* begin direct dispatch, to avoid processing packets out of order.
*/
static void
netisr_processqueue(struct netisr *ni)
{
struct mbuf *m;
for (;;) {
IF_DEQUEUE(ni->ni_queue, m);
if (m == NULL)
break;
ni->ni_handler(m);
}
}
/*
* Call the netisr directly instead of queueing the packet, if possible.
*/
void
netisr_dispatch(int num, struct mbuf *m)
{
struct netisr *ni;
isrstat.isrs_count++; /* XXX redundant */
KASSERT(!(num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs))),
("bad isr %d", num));
ni = &netisrs[num];
if (ni->ni_queue == NULL) {
isrstat.isrs_drop++;
m_freem(m);
return;
}
/*
* Do direct dispatch only for MPSAFE netisrs (and
* only when enabled). Note that when a netisr is
* marked MPSAFE we permit multiple concurrent instances
* to run. We guarantee only the order in which
* packets are processed for each "dispatch point" in
* the system (i.e. call to netisr_dispatch or
* netisr_queue). This insures ordering of packets
* from an interface but does not guarantee ordering
* between multiple places in the system (e.g. IP
* dispatched from interfaces vs. IP queued from IPSec).
*/
if (netisr_direct && (ni->ni_flags & NETISR_MPSAFE)) {
isrstat.isrs_directed++;
/*
* NB: We used to drain the queue before handling
* the packet but now do not. Doing so here will
* not preserve ordering so instead we fallback to
* guaranteeing order only from dispatch points
* in the system (see above).
*/
ni->ni_handler(m);
} else {
isrstat.isrs_deferred++;
if (IF_HANDOFF(ni->ni_queue, m, NULL))
schednetisr(num);
}
}
/*
* Same as above, but always queue.
* This is either used in places where we are not confident that
* direct dispatch is possible, or where queueing is required.
* It returns (0) on success and ERRNO on failure. On failure the
* mbuf has been free'd.
*/
int
netisr_queue(int num, struct mbuf *m)
{
struct netisr *ni;
KASSERT(!(num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs))),
("bad isr %d", num));
ni = &netisrs[num];
if (ni->ni_queue == NULL) {
isrstat.isrs_drop++;
m_freem(m);
return (ENXIO);
}
isrstat.isrs_queued++;
if (!IF_HANDOFF(ni->ni_queue, m, NULL))
return (ENOBUFS); /* IF_HANDOFF has free'd the mbuf */
schednetisr(num);
return (0);
}
static void
swi_net(void *dummy)
{
struct netisr *ni;
u_int bits;
int i;
#ifdef DEVICE_POLLING
const int polling = 1;
#else
const int polling = 0;
#endif
do {
bits = atomic_readandclear_int(&netisr);
if (bits == 0)
break;
while ((i = ffs(bits)) != 0) {
isrstat.isrs_swi_count++;
i--;
bits &= ~(1 << i);
ni = &netisrs[i];
if (ni->ni_handler == NULL) {
printf("swi_net: unregistered isr %d.\n", i);
continue;
}
if ((ni->ni_flags & NETISR_MPSAFE) == 0) {
mtx_lock(&Giant);
if (ni->ni_queue == NULL)
ni->ni_handler(NULL);
else
netisr_processqueue(ni);
mtx_unlock(&Giant);
} else {
if (ni->ni_queue == NULL)
ni->ni_handler(NULL);
else
netisr_processqueue(ni);
}
}
} while (polling);
}
static void
start_netisr(void *dummy)
{
if (swi_add(NULL, "net", swi_net, NULL, SWI_NET, INTR_MPSAFE, &net_ih))
panic("start_netisr");
}
SYSINIT(start_netisr, SI_SUB_SOFTINTR, SI_ORDER_FIRST, start_netisr, NULL)