mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-15 10:17:20 +00:00
Code Issues Releases Activity
5fbfd9dc9b
freebsd/etc/pccard.conf.sample

665 lines
19 KiB
Plaintext
Raw Normal View History

PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Sample PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
$Id$ -> $FreeBSD$
1999-08-27 23:37:10 +00:00
# $FreeBSD$
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 10 11 13 15
# Available memory slots
memory 0xd4000 96k
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Add driver support for the Aironet 4500/4800 series wireless 802.11 NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported, though only the ISA and PCI ones will work on the alpha for now. PCCARD, ISA and PCI attachments are all provided. Also provided an ancontrol(8) utility for configuring the NIC, man pages, and updated pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired mode, although you must configure the kernel explicitly to support the hardwired mode since you have to know the I/O address and port ahead of time. Special thanks to Doug Ambrisko for doing the initial newbus hackery and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
# Aironet PC4500 2Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
config 0x5 "an0" ?
insert echo Aironet PC4500 inserted
insert /etc/pccard_ether an0
remove echo Aironet PC4500 removed
remove /sbin/ifconfig an0 delete
# Aironet PC4800 11Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
config 0x5 "an0" ?
insert echo Aironet PC4800 inserted
insert /etc/pccard_ether an0
remove echo Aironet PC4800 removed
remove /sbin/ifconfig an0 delete
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "wi0" ?
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
insert echo WaveLAN/IEEE inserted
insert /etc/pccard_ether wi0
remove echo WaveLAN/IEEE removed
remove /sbin/ifconfig wi0 delete
# NCR WaveLAN/IEEE
card "NCR" "WaveLAN/IEEE"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "wi0" ?
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
insert echo WaveLAN/IEEE inserted
insert /etc/pccard_ether wi0
remove echo WaveLAN/IEEE removed
remove /sbin/ifconfig wi0 delete
# Cabletron RoamAbout, WaveLAN/IEEE clone
card "Cabletron" "RoamAbout 802.11 DS"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "wi0" ?
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
insert echo WaveLAN/IEEE inserted
insert /etc/pccard_ether wi0
remove echo WaveLAN/IEEE removed
remove /sbin/ifconfig wi0 delete
# IBM PCMCIA Ethernet I/II
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
card "IBM Corp." "Ethernet"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ed0" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
ether 0xff0
insert echo IBM PCMCIA Ethernet inserted
insert /etc/pccard_ether ed0
remove echo IBM PCMCIA Ethernet removed
remove /sbin/ifconfig ed0 delete
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
# Melco LPC-T (PIO mode)
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
card "PCMCIA" "UE2212"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ed0" ? 0x10
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
ether 0xff0
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
insert echo UE2212 inserted
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert /etc/pccard_ether ed0
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
remove echo UE2212 card removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
remove /sbin/ifconfig ed0 delete
# Accton EN2212
# Very slow! (PIO mode)
card "ACCTON" "EN2212"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ed0" ? 0x10
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
ether 0xff0
insert echo Accton EN2212 inserted
insert /etc/pccard_ether ed0
remove echo Accton EN2212 removed
remove /sbin/ifconfig ed0 delete
- Added entry for Accton 2216 ethernet card. Submitted by: Patrick Gardella <patrick@cre8tivegroup.com>
1997-11-14 18:48:59 +00:00
#Accton 2216
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x20 "ed0" ?
- Added entry for Accton 2216 ethernet card. Submitted by: Patrick Gardella <patrick@cre8tivegroup.com>
1997-11-14 18:48:59 +00:00
insert echo Accton 2216 inserted
insert /etc/pccard_ether ed0
remove echo Accton 2216 removed
remove /sbin/ifconfig ed0 delete
Add COREGA EtherII PCC-T entry. Submitted by: KANAZAWA makoto <mako@tcn-catv.ne.jp> PR: conf/12650
1999-10-07 15:50:44 +00:00
# COREGA EtherII PCC-T
card "corega K.K." "corega EtherII PCC-T"
config 0x20 "ed0" ?
insert echo EtherII PCC-T inserted
insert /etc/pccard_ether ed0
remove echo EtherII PCC-T removed
remove /sbin/ifconfig ed0 delete
Add I-O DATA PCLATE entry. Submitted by: sanpei@sanpei.org PR: conf/13038 URL: http://www.iodata.co.jp/products/pccard/pclate.htm
1999-10-11 05:01:08 +00:00
# I-O DATA PCLATE
card "IO DATA" "PCLATE"
config 0x20 "ed0" ? 0x10
insert echo IO DATA PCLATE inserted
insert /etc/pccard_ether ed0
remove echo IO DATA PCLATE removed
remove /sbin/ifconfig ed0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# 3Com Etherlink III 3C589B, 3C589C
card "3Com Corporation" "3C589"
Remove the hardcoding of the IRQ, and instead have it determine a free IRQ. For now only enable on the 3C589 until other cards have been tested.
1996-06-19 01:28:07 +00:00
config 0x1 "ep0" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo 3Com Etherlink III inserted
Change the 'nep0' lines to 'ep0' since we are very soon to get a working if_ep.c driver for PCCARD stuff. Also,change the 3C589 examples to reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
insert /etc/pccard_ether ep0 -link0 link1
# insert /etc/pccard_ether ep0 link0 -link1
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
remove echo 3Com Etherlink III removed
Change the 'nep0' lines to 'ep0' since we are very soon to get a working if_ep.c driver for PCCARD stuff. Also,change the 3C589 examples to reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
remove /sbin/ifconfig ep0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Add support for explicit 3C589D varients and XJ1336 modems
1997-12-16 02:43:26 +00:00
# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep0" ?
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
3C574TX Fast Etherlink PC-card support.
1999-07-25 01:21:44 +00:00
# 3Com Fast Etherlink 3C574TX
card "3Com" "3C574-TX Fast EtherLink PC Ca"
config 0x1 "ep0" ? 0x1
insert echo 3Com Fast Etherlink 3C574TX inserted
insert /etc/pccard_ether ep0
remove echo 3Com Fast Etherlink 3C574TX removed
remove /sbin/ifconfig ep0 delete
Add example entry for the 3Com Megahertz 574B
2000-01-15 05:44:14 +00:00
# 3Com Megahertz 574B
card "3Com" "Megahertz 574B"
config 0x1 "ep0" ? 0x1
insert echo 3Com Megahertz 574B inserted
insert /etc/pccard_ether ep0
remove echo 3Com Megahertz 574B removed
remove /sbin/ifconfig ep0 delete
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
# LinkSys ethernet card
card "E-CARD" "E-CARD"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x20 "ed0" ?
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
insert echo "LinkSys card inserted"
insert /etc/pccard_ether ed0
remove echo "LinkSys card removed"
remove /sbin/ifconfig ed0 delete
- Added entry for 'Linksys Combo PCMCIA EthernetCard' Submitted by: Brad Karp <karp@eecs.harvard.edu>
1997-12-07 05:20:56 +00:00
# Linksys Combo PCMCIA EthernetCard (model EC2T on box)
Add 3com OfficeConnect 572
2000-01-10 02:46:57 +00:00
card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ed0" ?
- Added entry for 'Linksys Combo PCMCIA EthernetCard' Submitted by: Brad Karp <karp@eecs.harvard.edu>
1997-12-07 05:20:56 +00:00
insert echo Linksys Ethernet inserted
insert /etc/pccard_ether ed0
remove echo Linksys Ethernet removed
remove /sbin/ifconfig ed0 delete
add sample entry for Linksys 10/100 card
1999-10-28 12:32:55 +00:00
#Linksys EtherFast 10/100 PC Card (PCMPC100)
correct the entry for the Linksys EtherFast 10/100 PC Card (PCMPC100). the entry was one character short...the final ")" was missing. Pointed out by: Chris D. Faulhaber - jedgar@fxp.org - jedgar@FreeBSD.org
2000-01-11 02:03:12 +00:00
card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)"
add sample entry for Linksys 10/100 card
1999-10-28 12:32:55 +00:00
config 0x3 "ed0" ?
insert echo Linksys Fast 100-BaseT inserted
insert /etc/pccard_ether ed0
remove echo Linksys Fast 100-BaseT removed
remove /sbin/ifconfig ed0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Farallon EtherMac
card "Farallon" "ENet"
Remove the hardcoding of the IRQ, and instead have it determine a free IRQ. For now only enable on the 3C589 until other cards have been tested.
1996-06-19 01:28:07 +00:00
config 0x1 "ep0" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Farallon EtherMac inserted
Change the 'nep0' lines to 'ep0' since we are very soon to get a working if_ep.c driver for PCCARD stuff. Also,change the 3C589 examples to reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
insert /etc/pccard_ether ep0
# insert /etc/pccard_ether ep0 link0
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
remove echo Farallon EtherMac removed
Change the 'nep0' lines to 'ep0' since we are very soon to get a working if_ep.c driver for PCCARD stuff. Also,change the 3C589 examples to reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
remove /sbin/ifconfig ep0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Fujitsu MBH10302
card "PCMCIA MBH10302" "01"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x14 "fe0" ?
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
insert echo Fujitsu MBH10302 inserted
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert /etc/pccard_ether fe0
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
remove echo Fujitsu MBH10302 removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
remove /sbin/ifconfig fe0 delete
# NextCom J Link NC5310
card "NextComK.K." "NC5310 Ver1.0 "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x14 "fe0" ?
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
insert echo NextCom J Link NC5310 inserted
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert /etc/pccard_ether fe0
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
remove echo NextCom J Link NC5310 removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
remove /sbin/ifconfig fe0 delete
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
# HITACHI HT-4840-11
card "HITACHI" "HT-4840-11"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1a "fe0" ?
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
insert echo HT-4840-11 inserted
insert /etc/pccard_ether fe0
remove echo HT-4840-11 removed
remove /sbin/ifconfig fe0 delete
Add entries for the Danpex EN-6200P2 and Megahertz XJ4336
1997-10-23 14:00:40 +00:00
# Danpex (Alloy, etc.) EN-6200P2
card "DANPEX" "EN-6200P2"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "ed0" ?
Add entries for the Danpex EN-6200P2 and Megahertz XJ4336
1997-10-23 14:00:40 +00:00
insert /etc/pccard_ether ed0
remove /sbin/ifconfig ed0 delete
Add the Fujitsu MBH10303 Submitted by: David Kulp <dkulp@neomorphic.com>
1998-09-11 18:35:57 +00:00
# Fujitsu MBH10303 Ethernet PCMCIA
card "EAGLE Technology" "NE200 ETHERNET LAN MBH10303 "
config 0x1 "fe0" ?
insert /etc/pccard_ether fe0
remove /sbin/ifconfig fe0 delete
Add Compex Net-A and 3Com/USR/Megahertz 3CM556 Submitted by: Willem Jan Withagen <wjw@surf.IAE.nl> and Brian Handy <handy@lambic.physics.montana.edu>
1998-09-12 18:53:49 +00:00
# Compex Net-A adapter
card "Ethernet" "Adapter"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ed0" ?
Add Compex Net-A and 3Com/USR/Megahertz 3CM556 Submitted by: Willem Jan Withagen <wjw@surf.IAE.nl> and Brian Handy <handy@lambic.physics.montana.edu>
1998-09-12 18:53:49 +00:00
ether 0xff0
insert /etc/pccard_ether ed0
remove /sbin/ifconfig ed0 delete
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
added "Telecom Device SuperSocket RE450T" (PCMCIA NE2000 variant).
1998-02-24 13:56:38 +00:00
# Telecom Device SuperSocket RE450T
# Note: There are several revisions of the cardon the market.
# Type A needs no "ether" line.
# Type B needs "ether 0x110" line.
# Type C needs "ether 0xff0" line.
# Yet more revisions exist, reportedly.
# If you see strange MAC address shown by ifconfig command,
# try other config.
card "Ethernet" "Adapter"
config 0x2 "ed0" ?
# ether 0x110 00:e0:98
# ether 0xff0 00:e0:98
insert /etc/pccard_ether ed0
remove /sbin/ifconfig ed0 delete
Add entry for D-Link DE-660 Submitted by: Brian Handy <handy@lambic.physics.montana.edu>
1999-02-19 07:20:55 +00:00
# D-Link DE-660 NE2000 clone
card "D-Link" "DE-660"
config 0x20 "ed0" ? 0x10
insert /etc/pccard_ether ed0 link0 -link1
remove /sbin/ifconfig ed0 delete
added "Telecom Device SuperSocket RE450T" (PCMCIA NE2000 variant).
1998-02-24 13:56:38 +00:00
Add entry for NDC Ethernet Instant-Link Credit Card Adapter, a NE2000 clone. This was tested on a ND5100 rev.A2 card.
1999-09-06 18:29:09 +00:00
# NDC Ethernet Instant-Link NE2000 clone
card "NDC" "Ethernet"
config 0x22 "ed0" ? 0x10
insert echo NDC Ethernet Instant-Link adapter inserted
insert /etc/pccard_ether ed0
remove echo NDC Ethernet Instant-Link adapter removed
remove /sbin/ifconfig ed0 delete
Added CyQ've ELA-010 Ethernet Card
1999-07-25 01:56:16 +00:00
# CyQ've ELA-010
card "CyQ've" "ELA-010"
config 0x20 "ed0" ?
insert /etc/pccard_ether ed0
remove /sbin/ifconfig ed0 delete
Add Allied Telesis CentreCOM LA-PCM_V2 entry. Submitted by: sanpei@sanpei.org PR: conf/14301
1999-10-16 13:52:43 +00:00
# Allied Telesis CentreCOM LA-PCM_V2 ethernet card
# NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card
card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2"
config 0x20 "ed0" ?
insert echo CentreCOM LA-PCM V2 Ethernet card inserted
insert /etc/pccard_ether ed0
remove echo CentreCOM LA-PCM V2 Ethernet card removed
remove ifconfig ed0 delete
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
# Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)
card "Intel" "EtherExpress(TM) PRO/100 PC C"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "xe0" ?
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
insert echo Intel EtherExpress PRO/100 Mobile Adapter/16 inserted
insert /etc/pccard_ether xe0
remove echo Intel EtherExpress PRO/100 Mobile Adapter/16 removed
Add entry for BayNetworks NETGEAR FA410TXC Fast Ethernet. Poster had this in PAO format, so there might be a buglet in my conversion. Submitted by: Robert Withrow <bwithrow@nortelnetworks.com>
1999-11-05 11:17:23 +00:00
remove ifconfig xe0 delete
Fix the entry for the NetGear FA410TX, which appears to have been committed untested (invalid syntax, and config index 0x1 does not appear to exist in the card as it currently ships).
1999-11-21 09:48:15 +00:00
# BayNetworks NETGEAR FA410TXC Fast Ethernet
card "NETGEAR" "FA410TX"
config 0x20 "ed0" ?
Add entry for BayNetworks NETGEAR FA410TXC Fast Ethernet. Poster had this in PAO format, so there might be a buglet in my conversion. Submitted by: Robert Withrow <bwithrow@nortelnetworks.com>
1999-11-05 11:17:23 +00:00
insert echo NETGEAR FA410TX Ethernet inserted
insert /etc/pccard_ether ed0
remove echo NETGEAR FA410TX Ethernet removed
remove ifconfig ed0 delete
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
Entry for Network Everywhere Ethernet 10BaseT PC Card. Submitted by: alfred
1999-11-05 11:21:19 +00:00
# Network Everywhere Ethernet 10BaseT PC Card
card "Network Everywhere" "Ethernet 10BaseT PC Card"
config 0x1 "ed0" ?
insert echo Network Everywhere Ethernet 10BaseT PC Card inserted
insert /etc/pccard_ether ed0
remove echo Network Everywhere Ethernet 10BaseT PC Card removed
remove /sbin/ifconfig ed0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# AIWA PV-JF288
card "AIWA CO.,LTD." "PV-JF288 "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo AIWA PV-JF288 inserted
remove echo AIWA PV-JF288 removed
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem.
card "AD PC_CARD" "RC288ACL"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio2" ?
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
insert echo Apex Data Mobile Plus 28.8 Modem inserted
remove echo Apex Data Mobile Plus 28.8 Modem removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Megahertz XJ1144
card "MEGAHERTZ" "XJ1144"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Megahertz XJ1144 inserted
remove echo Megahertz XJ1144 removed
# Megahertz XJ2144 (US)
card "MEGAHERTZ" "XJ2144"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Megahertz XJ2144 inserted
remove echo Megahertz XJ2144 removed
# Megahertz XJ2144 (JP)
card "MEGAHERTZ" "XJ2144-81"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Megahertz XJ2144 inserted
remove echo Megahertz XJ2144 removed
# Megahertz XJ2288
card "MEGAHERTZ" "XJ2288"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Megahertz XJ2288 inserted
remove echo Megahertz XJ2288 removed
Add entries for the Danpex EN-6200P2 and Megahertz XJ4336
1997-10-23 14:00:40 +00:00
# Megahertz XJ4336
card "Megahertz" "XJ4336-CC4336"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x21 "sio1" ?
Add entries for the Danpex EN-6200P2 and Megahertz XJ4336
1997-10-23 14:00:40 +00:00
insert echo Megahertz XJ4336 inserted
remove echo Megahertz XJ4336 removed
Add support for explicit 3C589D varients and XJ1336 modems
1997-12-16 02:43:26 +00:00
# Megahertz XJ1336
card "U.S. Robotics" "XJ/CC1336"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x21 "sio2" ?
Add support for explicit 3C589D varients and XJ1336 modems
1997-12-16 02:43:26 +00:00
insert echo U.S. Robotics XJ/CC1336 inserted
remove echo U.S. Robotics XJ/CC1336 removed
Add Nokia Cellular Data Card DTP2 and DTP-2 ver II
1999-11-16 17:44:31 +00:00
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2"
config 0x22 "sio2" ?
config 0x23 "sio3" ?
insert echo Nokia Mobile Phones DTP-2 inserted
remove echo Nokia Mobile Phones DTP-2 removed
# This Nokia example allows either 1 or 2 Nokia cards to be fitted.
# With 2 Mobile Phones and Multilink PPP you can get a 19200 data channel.
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2 ver II"
config 0x23 "sio2" ?
config 0x24 "sio3" ?
insert echo Nokia Mobile Phones DTP-2 ver II inserted
remove echo Nokia Mobile Phones DTP-2 ver II removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Omron ME2814 FAX/DATA MODEM
card "OMRON" "ME2814 FAX/DATA MOD"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo OMRON ME2814 Modem inserted
remove echo OMRON ME2814 Modem removed
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414 DATA/FAX MOD"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo TDK DF1414 inserted
remove echo TDK DF1414 removed
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414EX DATA/FAX M"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo TDK DF1414 inserted
remove echo TDK DF1414 removed
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-706C"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Panasonic TO-706C inserted
remove echo Panasonic TO-706C removed
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-CAF288"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Panasonic TO-CAF288 inserted
remove echo Panasonic TO-CAF288 removed
# NewMedia 14.4K FAX/Data Modem
card "CIRRUS LOGIC" "FAX MODEM"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Newmedia 14.4 Modem inserted
remove echo Newmedia 14.4 Modem removed
# Omron MD24XCA FAX/Data Modem
- Commented out some PAO specific portions of this file. Noticed by: Michael Reifenberger <root@totum.plaut.de>
1997-10-30 01:17:01 +00:00
#card "OMRON Corp." "MD24XCA"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
# config 0x23 "sio2" ?
- Commented out some PAO specific portions of this file. Noticed by: Michael Reifenberger <root@totum.plaut.de>
1997-10-30 01:17:01 +00:00
# reset 10000
# insert echo OMRON MD24XCA Modem inserted
# remove echo OMRON MD24XCA Modem removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Hayes OPTIMA 288 FAX/Data Modem
# currently does not work on my machine
card "Hayes" "OPTIMA 288 + FAX fo"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x24 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
reset 10000
insert echo Optima 288 inserted
remove echo Optima 288 removed
Add an entry for the HAYES OPTIMA 28.8k
1998-09-25 22:08:53 +00:00
# This one does work though
card "HAYES" "OPT288"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio3" ?
Add an entry for the HAYES OPTIMA 28.8k
1998-09-25 22:08:53 +00:00
insert echo Hayes Optima 28.8k inserted
remove echo Hayes Optima 28.8k removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# PREMAX FM288 FAX/Data Modem
card "PREMAX" "FM288 "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo PREMAX FM288 Modem inserted
remove echo PREMAX FM288 Modem removed
# Novalink NovaModem 144
card "NovaLink Tech." "NovaModem 144 "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo NovaModem 144 Modem inserted
remove echo NovaModem 144 Modem removed
# US Robotics Sportster PCMCIA V.34
# US Robotics COURIER PCMCIA V.34
card "USRobotics" "PCMCIA 28800 Data/F"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x3 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo USRobotics PCMCIA Modem inserted
remove echo USRobotics PCMCIA Modem removed
- Added entry for Xircon CreditCard Modem. Submitted by: "Mike Del" <repenting@hotmail.com>
1998-06-08 21:10:41 +00:00
# Xircom CreditCard Modem
card "Xircom" "CreditCard Modem CM-56T"
Updated entry for Xircom CreditCard Modem Submitted by: "Mike Del" <repenting@hotmail.com>
1998-06-15 17:51:03 +00:00
config 0x17 "sio1" ?
- Added entry for Xircon CreditCard Modem. Submitted by: "Mike Del" <repenting@hotmail.com>
1998-06-08 21:10:41 +00:00
reset 100
insert echo Xircom CreditCard Modem CM-56T inserted
remove echo Xircom CreditCard Modem CM-56T removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Xircom CreditCard Ethernet+Modem (Modem only !!!)
card "Xircom" "CreditCard Ethernet"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Xircom CreditCard Modem inserted
remove echo Xircom CreditCard Modem removed
Xircom Ethernet+Modem 10/100+
1999-02-22 14:03:31 +00:00
# Xircom CreditCard Ethernet 10/100 + modem (modem only)
card "Xircom" "CreditCard Ethernet 10/100 + "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1f "sio3" ?
Xircom Ethernet+Modem 10/100+
1999-02-22 14:03:31 +00:00
insert echo Xircom CreditCard Modem inserted
remove echo Xircom CreditCard Modem removed
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x17 "sio3" ?
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
insert echo Xircom CreditCard Modem inserted
insert /etc/pccard_ether xe0
remove echo Xircom CreditCard Modem removed
remove /sbin/ifconfig xe0 delete
# Xircom CreditCard Ethernet 10/100
card "Xircom" "CreditCard 10/100"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "xe0" ?
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
insert echo Xircom CreditCard Ethernet inserted
insert /etc/pccard_ether xe0
remove echo Xircom CreditCard Ethernet removed
remove /etc/pccard_ether xe0 delete
Add an entry for the Xircom GlobalACCESS modem PR: 10277 Submitted by: Nathan Ahlstrom <nrahlstr@winternet.com>
1999-04-25 10:27:22 +00:00
# Xircom GlobalACCESS modem
card "Xircom" "CreditCard Modem 56 - GlobalA"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1f "sio2" ?
Add an entry for the Xircom GlobalACCESS modem PR: 10277 Submitted by: Nathan Ahlstrom <nrahlstr@winternet.com>
1999-04-25 10:27:22 +00:00
insert echo Xircom CreditCard Modem 56 - GlobalACCESS inserted
remove echo Xircom CreditCard Modem 56 - GlobalACCESS removed
Add network entry for Xircom Realport (Ethernet + modem). Submitted by: Nick Slager <nicks@albury.net.au>
1999-11-05 11:11:09 +00:00
# Xircom Realport card + modem
card "Xircom" "16-bit Ethernet + Modem 56"
config 0x27 "xe0" 9
insert echo Xircom Realport Ethernet inserted
insert /etc/pccard_ether xe0
remove echo Xircom Realport Ethernet removed
remove /etc/pccard_ether xe0 delete
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# GATEWAY 2000 FAX/Data Modem (14.4K)
card "GATEWAY2000" "CC3144"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio3" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo GATEWAY2000 FAX/Data Modem inserted
remove echo GATEWAY2000 FAX/Data Modem removed
# IBM Push/Pop Modem (14.4K)
card "IBM" "Push/Pop Modem(14.4"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo IBM Push/Pop Modem inserted
remove echo IBM Push/Pop Modem removed
Add entry for Eiger 33.6K modem Submitted by: John Goerzen <jgoerzen@alexanderwohl.complete.org>
1998-02-10 01:01:35 +00:00
# Eiger PCCARD modem
# Apparently this modem does not work unless the recommended
# init string (AT&F&C1&D2) is supplied.
card "PCMCIA " "33.6K Fax/Modem "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 23 "sio2" ?
Add entry for Eiger 33.6K modem Submitted by: John Goerzen <jgoerzen@alexanderwohl.complete.org>
1998-02-10 01:01:35 +00:00
insert echo Eiger 33.6K modem inserted
remove echo Eiger 33.6K modem removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Added NTT ThunderCard Modem... (because I'm using it :-))
1998-02-24 13:32:36 +00:00
# NTT ThunderCard Modem
card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio2" ?
Added NTT ThunderCard Modem... (because I'm using it :-))
1998-02-24 13:32:36 +00:00
insert echo NTT ThunderCard inserted
remove echo NTT ThunderCard removed
Added U.S. Robotics XJ1560J (X2 X-jack modem)
1998-03-19 16:25:17 +00:00
# U.S. Robotics XJ1560J
card "U.S. Robotics" "XJ/CC1560J"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio2" ?
Added U.S. Robotics XJ1560J (X2 X-jack modem)
1998-03-19 16:25:17 +00:00
insert echo U.S. Robotics XJ1560J inserted
remove echo U.S. Robotics XJ1560J removed
Add Compex Net-A and 3Com/USR/Megahertz 3CM556 Submitted by: Willem Jan Withagen <wjw@surf.IAE.nl> and Brian Handy <handy@lambic.physics.montana.edu>
1998-09-12 18:53:49 +00:00
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
Add Compex Net-A and 3Com/USR/Megahertz 3CM556 Submitted by: Willem Jan Withagen <wjw@surf.IAE.nl> and Brian Handy <handy@lambic.physics.montana.edu>
1998-09-12 18:53:49 +00:00
insert echo 3Com PCMCIA 56K Modem inserted
remove echo 3Com PCMCIA 56K Modem removed
Add 3Com/Noteworthy 56k modem PR: 9187 Submitted by: Craig Leres <leres@ee.lbl.gov> Requested by: Nathan Ahlstrom <nrahlstr@winternet.com>
1999-05-03 19:08:43 +00:00
# 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)
card "Toshiba America" "3CXM056-BNW"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x20 "sio1" ?
Add 3Com/Noteworthy 56k modem PR: 9187 Submitted by: Craig Leres <leres@ee.lbl.gov> Requested by: Nathan Ahlstrom <nrahlstr@winternet.com>
1999-05-03 19:08:43 +00:00
insert echo NoteWorthy 56K PCMCIA Modem inserted
remove echo NoteWorthy 56K PCMCIA Modem removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# BUG Linkboy D64K (ISDN)
card "BUG Inc." "Linkboy D64K"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo BUG Linkboy D64K inserted
remove echo BUG Linkboy D64K removed
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX ADA"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "sio3" ? 0x82
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo NTT DoCoMo DATA/FAX Adapter inserted
remove echo NTT DoCoMo DATA/FAX Adapter removed
Add another modem (Psion Dacom) Submitted by: "Gary Palmer" <gpalmer@FreeBSD.ORG>
1998-12-15 02:57:30 +00:00
# Random modem bundled with Dell systems
card "Psion Dacom" "Gold Card Global 56K+Fax"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
Add another modem (Psion Dacom) Submitted by: "Gary Palmer" <gpalmer@FreeBSD.ORG>
1998-12-15 02:57:30 +00:00
insert echo "Psion Dacom modem card inserted"
remove echo "Psion Dacom modem card removed"
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
# Actiontec Datalink with v.90 upgrade
card "PCMCIA " "56K V.90 Fax Modem (LK) "
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1f "sio2" ?
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
insert echo "Actiontec Datalink modem card inserted"
remove echo "Actiontec Datalink modem card removed"
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Panasonic FM-RADIO card
- Commented out some PAO specific portions of this file. Noticed by: Michael Reifenberger <root@totum.plaut.de>
1997-10-30 01:17:01 +00:00
#card "Panasonic" "CF-JVR101"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
# config 0x22 "sio3" ?
- Commented out some PAO specific portions of this file. Noticed by: Michael Reifenberger <root@totum.plaut.de>
1997-10-30 01:17:01 +00:00
# insert echo Panasonic FM radio card inserted
# remove echo Panasonic FM radio card removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# SunDisk Flash ATA
# (OEM: Epson Flash Packer)
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
card "SunDisk" "SDP5"
config 0x3 "ata1" ?
insert echo Sundisk Flash ATA inserted
remove echo Sundisk Flash ATA removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
card "SunDisk" "SDP"
config 0x3 "ata1" ?
insert echo SunDisk Flash ATA Inserted
remove echo SunDisk Flash ATA Removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Midori Elec Fast Flash
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
card "Midori Elec." "FAST FLASH"
config 0x3 "ata1" ?
insert echo Midori Elec Fast FLASH inserted
remove echo Midori Elec Fast FLASH removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Maxtor 131MB Type III HDD
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
card "Maxtor" "MXL131"
config 0x03 "ata1" ?
insert echo Maxtor 131MB HDD inserted
remove echo Maxtor 131MB HDD removed
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
- Update the Adaptect SlimSCSI CIS tuple so that it works with FreeBSD's default pccard daemon.
1997-10-21 18:07:36 +00:00
# Adaptec SlimSCSI (also included with Sony CD-ROM players)
card "Adaptec, Inc." "APA-1460 SCSI Host Adapter"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x9 "aic0" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo Adaptec Slim SCSI inserted
remove echo Adaptec Slim SCSI removed
# NewMedia Bustoaster SCSI
card "New Media" "SCSI"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x22 "aic0" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
insert echo New Media Bus Toaster inserted
remove echo New Media Bus Toaster removed
# REX5535AC, REX5535X SCSI
commented out REX-5535 because -current does not have spc driver.
1998-02-24 13:26:57 +00:00
#card "PCMCIA SCSI MBH1040" "01"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
# config 0x3a "spc0" ?
commented out REX-5535 because -current does not have spc driver.
1998-02-24 13:26:57 +00:00
# insert echo REX-5535 SCSI card inserted
# remove echo REX-5535 SCSI card removed
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
# Libretto Floppy disk
card "Y-E DATA" "External FDD"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x4 "fdc0" ?
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
# Viking V.90/K56Flex modem
card "Viking" "V.90 K56flex"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio3" ?
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
insert echo Viking 56K Modem inserted
remove echo Viking 56K Modem removed
Reset the Zoom 56K modem when starting to use it. Failing to do so freezes your system. Submitted by:Sean O'Connell <sean@stat.Duke.EDU> (my hero)
1999-12-27 08:39:29 +00:00
# Zoom 56K modem
# Freezes your system entirely if you don't have the reset..
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1f "sio2" ?
Reset the Zoom 56K modem when starting to use it. Failing to do so freezes your system. Submitted by:Sean O'Connell <sean@stat.Duke.EDU> (my hero)
1999-12-27 08:39:29 +00:00
reset 1000
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
insert echo Zoom modem inserted
remove echo Zoom modem removed
# 3Com Megahertz 3CCE589E* 10 Mbps LAN PC Card
card "3Com" "Megahertz 589E"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x1 "ep0" ?
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
insert echo 3Com Megahertz Ethernet card inserted
insert /etc/pccard_ether ep0
remove echo 3Com Megahertz Ethernet card removed
remove /sbin/ifconfig ep0 delete
# 3Com/USR/MegaHertz 3CCM156
card "3COM" "3CCM156"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio2" ?
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
insert echo 3Com PCMCIA 56K modem inserted
remove echo 3Com PCMCIA 56K modem removed
Add IC-CARD Ethernet card & AT&T V34+ Fax Modem Submitted by: Maxim Sobolev <sobomax@altavista.net>
1999-02-22 14:08:44 +00:00
#AR-P500 ethernet card
card "IC-CARD" "IC-CARD"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x20 "ed0" ?
Add IC-CARD Ethernet card & AT&T V34+ Fax Modem Submitted by: Maxim Sobolev <sobomax@altavista.net>
1999-02-22 14:08:44 +00:00
insert echo AR-P500 Ethernet card inserted
insert /etc/pccard_ether ed0
remove echo AR-P500 Ethernet card removed
remove ifconfig ed0 delete
#Eiger 33.6 modem
card "AT&T" "V34+ Fax Modem"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x23 "sio1" ?
Add IC-CARD Ethernet card & AT&T V34+ Fax Modem Submitted by: Maxim Sobolev <sobomax@altavista.net>
1999-02-22 14:08:44 +00:00
insert echo Eiger 33.6K modem inserted
remove echo Eiger 33.6K modem removed
Add entry for Motorola Montana modem. Submitted by: Andre LeClaire <leclaire@sprintmail.com>
1999-02-25 23:33:51 +00:00
# Motorola Montana
card "Motorola" "MONTANA 33.6 FAX/MODEM"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x21 "sio1" ?
Add AmbiCom Inc NIC Submitted by: Wes Peters <wes@softweyr.com>
1999-05-04 08:39:11 +00:00
# AmbiCom 10BaseT card
card "AmbiCom Inc" "AMB8002T"
More PAO-ish stuff. Wildcard the IRQ bits.
1999-06-17 21:39:57 +00:00
config 0x20 "ed0" ?
Add AmbiCom Inc NIC Submitted by: Wes Peters <wes@softweyr.com>
1999-05-04 08:39:11 +00:00
insert echo AmbiCom 8002T inserted
insert /etc/pccard_ether ed0
remove echo AmbiCom 8002T removed
remove /sbin/ifconfig ed0 delete
Add 3com OfficeConnect 572
2000-01-10 02:46:57 +00:00
# 3Com OfficeConnect 3CXSH572BT
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
#This had auto, so the config slot might be wrong. Replace it by the
#one that pccardc dumpcis tells you is default.
#
Add 3com OfficeConnect 572
2000-01-10 02:46:57 +00:00
card "3Com" "OfficeConnect 572B"
o Remove entry that has 'any' for the interrupt and 'auto' for config. We don't have that yet. o Uncomment FLASH cards so when the ata flash patches go into the tree they will work. Reported by: hosokawa-san
2000-01-13 00:29:06 +00:00
config 0x1 "ep0" ? 0x1
Add 3com OfficeConnect 572
2000-01-10 02:46:57 +00:00
insert logger -s 3Com 3CXSH572BT inserted
insert /etc/pccard_ether $device
remove logger -s 3Com 3CXSH572BT removed
remove /etc/pccard_ether_remove $device
Reference in New Issue Copy Permalink