2001-12-23 22:04:08 +00:00
|
|
|
/*-
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* Copyright (c) 2001, 2002, 2003
|
2001-12-23 22:04:08 +00:00
|
|
|
* Bosko Milekic <bmilekic@FreeBSD.org>. All rights reserved.
|
2001-06-22 06:35:32 +00:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
2003-06-11 00:56:59 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
2002-07-31 01:42:19 +00:00
|
|
|
#include "opt_mac.h"
|
2001-06-22 06:35:32 +00:00
|
|
|
#include "opt_param.h"
|
2002-07-31 01:42:19 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/malloc.h>
|
2002-07-31 01:42:19 +00:00
|
|
|
#include <sys/mac.h>
|
2001-06-22 06:35:32 +00:00
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/lock.h>
|
|
|
|
#include <sys/mutex.h>
|
|
|
|
#include <sys/condvar.h>
|
|
|
|
#include <sys/smp.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/domain.h>
|
|
|
|
#include <sys/protosw.h>
|
2001-12-23 22:04:08 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
#include <vm/vm.h>
|
|
|
|
#include <vm/vm_kern.h>
|
|
|
|
#include <vm/vm_extern.h>
|
2002-06-13 23:53:42 +00:00
|
|
|
#include <vm/pmap.h>
|
|
|
|
#include <vm/vm_map.h>
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
/*
|
|
|
|
* mb_alloc: network buffer allocator
|
2003-05-15 19:05:28 +00:00
|
|
|
*
|
|
|
|
* XXX: currently, the "low watermark" sysctl is marked read-only as its
|
|
|
|
* effects are not completely implemented. To be fixed soon.
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
2001-06-22 06:35:32 +00:00
|
|
|
* Maximum number of PCPU containers. If you know what you're doing you could
|
|
|
|
* explicitly define MBALLOC_NCPU to be exactly the number of CPUs on your
|
2001-07-26 18:47:46 +00:00
|
|
|
* system during compilation, and thus prevent kernel structure bloat.
|
|
|
|
*
|
2001-12-23 22:04:08 +00:00
|
|
|
* SMP and non-SMP kernels clearly have a different number of possible CPUs,
|
2001-07-26 18:47:46 +00:00
|
|
|
* but because we cannot assume a dense array of CPUs, we always allocate
|
|
|
|
* and traverse PCPU containers up to NCPU amount and merely check for
|
|
|
|
* CPU availability.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
#ifdef MBALLOC_NCPU
|
2001-06-22 06:35:32 +00:00
|
|
|
#define NCPU MBALLOC_NCPU
|
|
|
|
#else
|
|
|
|
#define NCPU MAXCPU
|
|
|
|
#endif
|
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
/*-
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* The mbuf allocator is based on Alfred Perlstein's <alfred@FreeBSD.org>
|
|
|
|
* "memcache" proof-of-concept allocator which was itself based on
|
|
|
|
* several well-known SMP-friendly allocators.
|
|
|
|
*
|
|
|
|
* The mb_alloc mbuf allocator is a special when compared to other
|
|
|
|
* general-purpose allocators. Some things to take note of:
|
|
|
|
*
|
|
|
|
* Mbufs and mbuf clusters are two different objects. Sometimes we
|
|
|
|
* will allocate a single mbuf, other times a single cluster,
|
|
|
|
* other times both. Further, we may sometimes wish to allocate a
|
|
|
|
* whole chain of mbufs with clusters. This allocator will perform
|
|
|
|
* the common case of each scenario in one function call (this
|
|
|
|
* includes constructing or destructing the object) while only
|
|
|
|
* locking/unlocking the cache once, if it can get away with it.
|
|
|
|
* The caches consist of pure mbufs and pure clusters; that is
|
|
|
|
* there are no 'zones' containing mbufs with already pre-hooked
|
|
|
|
* clusters. Since we can allocate both objects atomically anyway,
|
|
|
|
* we don't bother fragmenting our caches for any particular 'scenarios.'
|
2001-06-22 06:35:32 +00:00
|
|
|
*
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* We allocate from seperate sub-maps of kmem_map, thus imposing
|
|
|
|
* an ultimate upper-limit on the number of allocatable clusters
|
|
|
|
* and mbufs and also, since the clusters all come from a
|
|
|
|
* virtually contiguous region, we can keep reference counters
|
|
|
|
* for them and "allocate" them purely by indexing into a
|
|
|
|
* dense refcount vector.
|
2001-06-22 06:35:32 +00:00
|
|
|
*
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* We call out to protocol drain routines (which can be hooked
|
|
|
|
* into us) when we're low on space.
|
2001-06-22 06:35:32 +00:00
|
|
|
*
|
|
|
|
* The mbuf allocator keeps all objects that it allocates in mb_buckets.
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* The buckets keep a number of objects (an object can be an mbuf or an
|
2001-06-22 06:35:32 +00:00
|
|
|
* mbuf cluster) and facilitate moving larger sets of contiguous objects
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* from the per-CPU caches to the global cache. The buckets also have
|
|
|
|
* the added advantage that objects, when migrated from cache to cache,
|
|
|
|
* are migrated in chunks that keep contiguous objects together,
|
|
|
|
* minimizing TLB pollution.
|
2001-06-22 06:35:32 +00:00
|
|
|
*
|
|
|
|
* The buckets are kept on singly-linked lists called "containers." A container
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* is protected by a mutex in order to ensure consistency. The mutex
|
2002-05-16 22:43:20 +00:00
|
|
|
* itself is allocated separately and attached to the container at boot time,
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* thus allowing for certain containers to share the same lock. Per-CPU
|
|
|
|
* containers for mbufs and mbuf clusters all share the same per-CPU
|
|
|
|
* lock whereas the global cache containers for these objects share one
|
|
|
|
* global lock.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
struct mb_bucket {
|
2001-12-23 22:04:08 +00:00
|
|
|
SLIST_ENTRY(mb_bucket) mb_blist;
|
|
|
|
int mb_owner;
|
|
|
|
int mb_numfree;
|
|
|
|
void *mb_free[0];
|
2001-06-22 06:35:32 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct mb_container {
|
2001-12-23 22:04:08 +00:00
|
|
|
SLIST_HEAD(mc_buckethd, mb_bucket) mc_bhead;
|
|
|
|
struct mtx *mc_lock;
|
|
|
|
int mc_numowner;
|
|
|
|
u_int mc_starved;
|
|
|
|
long *mc_types;
|
|
|
|
u_long *mc_objcount;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
u_long *mc_numbucks;
|
2001-06-22 06:35:32 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct mb_gen_list {
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_container mb_cont;
|
|
|
|
struct cv mgl_mstarved;
|
2001-06-22 06:35:32 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct mb_pcpu_list {
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_container mb_cont;
|
2001-06-22 06:35:32 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Boot-time configurable object counts that will determine the maximum
|
2001-12-23 22:04:08 +00:00
|
|
|
* number of permitted objects in the mbuf and mcluster cases. In the
|
2001-06-22 06:35:32 +00:00
|
|
|
* ext counter (nmbcnt) case, it's just an indicator serving to scale
|
|
|
|
* kmem_map size properly - in other words, we may be allowed to allocate
|
|
|
|
* more than nmbcnt counters, whereas we will never be allowed to allocate
|
|
|
|
* more than nmbufs mbufs or nmbclusters mclusters.
|
|
|
|
* As for nsfbufs, it is used to indicate how many sendfile(2) buffers will be
|
|
|
|
* allocatable by the sfbuf allocator (found in uipc_syscalls.c)
|
|
|
|
*/
|
|
|
|
#ifndef NMBCLUSTERS
|
2001-07-26 23:08:31 +00:00
|
|
|
#define NMBCLUSTERS (1024 + maxusers * 64)
|
2001-06-22 06:35:32 +00:00
|
|
|
#endif
|
2001-12-23 22:04:08 +00:00
|
|
|
#ifndef NMBUFS
|
2001-07-26 23:08:31 +00:00
|
|
|
#define NMBUFS (nmbclusters * 2)
|
2001-06-22 06:35:32 +00:00
|
|
|
#endif
|
2001-12-23 22:04:08 +00:00
|
|
|
#ifndef NSFBUFS
|
2001-07-26 23:08:31 +00:00
|
|
|
#define NSFBUFS (512 + maxusers * 16)
|
2001-06-22 06:35:32 +00:00
|
|
|
#endif
|
2001-12-23 22:04:08 +00:00
|
|
|
#ifndef NMBCNTS
|
2001-07-26 23:08:31 +00:00
|
|
|
#define NMBCNTS (nmbclusters + nsfbufs)
|
2001-06-22 06:35:32 +00:00
|
|
|
#endif
|
2001-07-26 23:08:31 +00:00
|
|
|
int nmbufs;
|
|
|
|
int nmbclusters;
|
|
|
|
int nmbcnt;
|
|
|
|
int nsfbufs;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
/*
|
|
|
|
* Sizes of objects per bucket. There are this size's worth of mbufs
|
|
|
|
* or clusters in each bucket. Please keep these a power-of-2.
|
|
|
|
*/
|
|
|
|
#define MBUF_BUCK_SZ (PAGE_SIZE * 2)
|
|
|
|
#define CLUST_BUCK_SZ (PAGE_SIZE * 4)
|
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
|
|
|
* Perform sanity checks of tunables declared above.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
tunable_mbinit(void *dummy)
|
|
|
|
{
|
2001-07-26 23:08:31 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
|
|
|
* This has to be done before VM init.
|
|
|
|
*/
|
2001-07-26 23:08:31 +00:00
|
|
|
nmbclusters = NMBCLUSTERS;
|
|
|
|
TUNABLE_INT_FETCH("kern.ipc.nmbclusters", &nmbclusters);
|
|
|
|
nmbufs = NMBUFS;
|
|
|
|
TUNABLE_INT_FETCH("kern.ipc.nmbufs", &nmbufs);
|
|
|
|
nsfbufs = NSFBUFS;
|
|
|
|
TUNABLE_INT_FETCH("kern.ipc.nsfbufs", &nsfbufs);
|
|
|
|
nmbcnt = NMBCNTS;
|
|
|
|
TUNABLE_INT_FETCH("kern.ipc.nmbcnt", &nmbcnt);
|
|
|
|
/* Sanity checks */
|
2001-06-22 06:35:32 +00:00
|
|
|
if (nmbufs < nmbclusters * 2)
|
|
|
|
nmbufs = nmbclusters * 2;
|
|
|
|
if (nmbcnt < nmbclusters + nsfbufs)
|
|
|
|
nmbcnt = nmbclusters + nsfbufs;
|
|
|
|
}
|
|
|
|
SYSINIT(tunable_mbinit, SI_SUB_TUNABLES, SI_ORDER_ANY, tunable_mbinit, NULL);
|
|
|
|
|
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* The freelist structures and mutex locks. The number statically declared
|
2001-06-22 06:35:32 +00:00
|
|
|
* here depends on the number of CPUs.
|
|
|
|
*
|
2001-12-23 22:04:08 +00:00
|
|
|
* We set up in such a way that all the objects (mbufs, clusters)
|
|
|
|
* share the same mutex lock. It has been established that we do not benefit
|
2001-06-22 06:35:32 +00:00
|
|
|
* from different locks for different objects, so we use the same lock,
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* regardless of object type. This also allows us to do optimised
|
|
|
|
* multi-object allocations without dropping the lock in between.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
struct mb_lstmngr {
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_gen_list *ml_genlist;
|
|
|
|
struct mb_pcpu_list *ml_cntlst[NCPU];
|
|
|
|
struct mb_bucket **ml_btable;
|
|
|
|
vm_map_t ml_map;
|
|
|
|
vm_offset_t ml_mapbase;
|
|
|
|
vm_offset_t ml_maptop;
|
|
|
|
int ml_mapfull;
|
|
|
|
u_int ml_objsize;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
u_int ml_objbucks;
|
2001-12-23 22:04:08 +00:00
|
|
|
u_int *ml_wmhigh;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
u_int *ml_wmlow;
|
2001-06-22 06:35:32 +00:00
|
|
|
};
|
2001-12-23 22:04:08 +00:00
|
|
|
static struct mb_lstmngr mb_list_mbuf, mb_list_clust;
|
|
|
|
static struct mtx mbuf_gen, mbuf_pcpu[NCPU];
|
2003-04-30 12:57:40 +00:00
|
|
|
static u_int *cl_refcntmap;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Local macros for internal allocator structure manipulations.
|
|
|
|
*/
|
2001-08-01 00:54:00 +00:00
|
|
|
#ifdef SMP
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_GET_PCPU_LIST(mb_lst) (mb_lst)->ml_cntlst[PCPU_GET(cpuid)]
|
2001-08-01 00:54:00 +00:00
|
|
|
#else
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_GET_PCPU_LIST(mb_lst) (mb_lst)->ml_cntlst[0]
|
2001-08-01 00:54:00 +00:00
|
|
|
#endif
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_GET_GEN_LIST(mb_lst) (mb_lst)->ml_genlist
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_LOCK_CONT(mb_cnt) mtx_lock((mb_cnt)->mb_cont.mc_lock)
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_UNLOCK_CONT(mb_cnt) mtx_unlock((mb_cnt)->mb_cont.mc_lock)
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
#define MB_GET_PCPU_LIST_NUM(mb_lst, num) \
|
|
|
|
(mb_lst)->ml_cntlst[(num)]
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
#define MB_BUCKET_INDX(mb_obj, mb_lst) \
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
(int)(((caddr_t)(mb_obj) - (caddr_t)(mb_lst)->ml_mapbase) / \
|
|
|
|
((mb_lst)->ml_objbucks * (mb_lst)->ml_objsize))
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
#define MB_GET_OBJECT(mb_objp, mb_bckt, mb_lst) \
|
|
|
|
{ \
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mc_buckethd *_mchd = &((mb_lst)->mb_cont.mc_bhead); \
|
2001-06-22 06:35:32 +00:00
|
|
|
\
|
|
|
|
(mb_bckt)->mb_numfree--; \
|
|
|
|
(mb_objp) = (mb_bckt)->mb_free[((mb_bckt)->mb_numfree)]; \
|
|
|
|
(*((mb_lst)->mb_cont.mc_objcount))--; \
|
|
|
|
if ((mb_bckt)->mb_numfree == 0) { \
|
|
|
|
SLIST_REMOVE_HEAD(_mchd, mb_blist); \
|
|
|
|
SLIST_NEXT((mb_bckt), mb_blist) = NULL; \
|
|
|
|
(mb_bckt)->mb_owner |= MB_BUCKET_FREE; \
|
|
|
|
} \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define MB_PUT_OBJECT(mb_objp, mb_bckt, mb_lst) \
|
|
|
|
(mb_bckt)->mb_free[((mb_bckt)->mb_numfree)] = (mb_objp); \
|
|
|
|
(mb_bckt)->mb_numfree++; \
|
|
|
|
(*((mb_lst)->mb_cont.mc_objcount))++;
|
|
|
|
|
2001-09-30 01:58:39 +00:00
|
|
|
#define MB_MBTYPES_INC(mb_cnt, mb_type, mb_num) \
|
|
|
|
if ((mb_type) != MT_NOTMBUF) \
|
|
|
|
(*((mb_cnt)->mb_cont.mc_types + (mb_type))) += (mb_num)
|
|
|
|
|
|
|
|
#define MB_MBTYPES_DEC(mb_cnt, mb_type, mb_num) \
|
|
|
|
if ((mb_type) != MT_NOTMBUF) \
|
|
|
|
(*((mb_cnt)->mb_cont.mc_types + (mb_type))) -= (mb_num)
|
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Ownership of buckets/containers is represented by integers. The PCPU
|
|
|
|
* lists range from 0 to NCPU-1. We need a free numerical id for the general
|
|
|
|
* list (we use NCPU). We also need a non-conflicting free bit to indicate
|
2001-06-22 06:35:32 +00:00
|
|
|
* that the bucket is free and removed from a container, while not losing
|
2001-12-23 22:04:08 +00:00
|
|
|
* the bucket's originating container id. We use the highest bit
|
2001-06-22 06:35:32 +00:00
|
|
|
* for the free marker.
|
|
|
|
*/
|
|
|
|
#define MB_GENLIST_OWNER (NCPU)
|
|
|
|
#define MB_BUCKET_FREE (1 << (sizeof(int) * 8 - 1))
|
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
/* Statistics structures for allocator (per-CPU and general). */
|
|
|
|
static struct mbpstat mb_statpcpu[NCPU + 1];
|
|
|
|
struct mbstat mbstat;
|
|
|
|
|
|
|
|
/* Sleep time for wait code (in ticks). */
|
|
|
|
static int mbuf_wait = 64;
|
|
|
|
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
static u_int mbuf_hiwm = 512; /* High wm on # of mbufs per cache */
|
|
|
|
static u_int mbuf_lowm = 128; /* Low wm on # of mbufs per cache */
|
|
|
|
static u_int clust_hiwm = 128; /* High wm on # of clusters per cache */
|
|
|
|
static u_int clust_lowm = 16; /* Low wm on # of clusters per cache */
|
2001-12-23 22:04:08 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Objects exported by sysctl(8).
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
SYSCTL_DECL(_kern_ipc);
|
|
|
|
SYSCTL_INT(_kern_ipc, OID_AUTO, nmbclusters, CTLFLAG_RD, &nmbclusters, 0,
|
|
|
|
"Maximum number of mbuf clusters available");
|
|
|
|
SYSCTL_INT(_kern_ipc, OID_AUTO, nmbufs, CTLFLAG_RD, &nmbufs, 0,
|
|
|
|
"Maximum number of mbufs available");
|
|
|
|
SYSCTL_INT(_kern_ipc, OID_AUTO, nmbcnt, CTLFLAG_RD, &nmbcnt, 0,
|
|
|
|
"Number used to scale kmem_map to ensure sufficient space for counters");
|
|
|
|
SYSCTL_INT(_kern_ipc, OID_AUTO, nsfbufs, CTLFLAG_RD, &nsfbufs, 0,
|
|
|
|
"Maximum number of sendfile(2) sf_bufs available");
|
|
|
|
SYSCTL_INT(_kern_ipc, OID_AUTO, mbuf_wait, CTLFLAG_RW, &mbuf_wait, 0,
|
|
|
|
"Sleep time of mbuf subsystem wait allocations during exhaustion");
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
SYSCTL_UINT(_kern_ipc, OID_AUTO, mbuf_hiwm, CTLFLAG_RW, &mbuf_hiwm, 0,
|
|
|
|
"Upper limit of number of mbufs allowed in each cache");
|
2003-05-15 19:05:28 +00:00
|
|
|
SYSCTL_UINT(_kern_ipc, OID_AUTO, mbuf_lowm, CTLFLAG_RD, &mbuf_lowm, 0,
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
"Lower limit of number of mbufs allowed in each cache");
|
|
|
|
SYSCTL_UINT(_kern_ipc, OID_AUTO, clust_hiwm, CTLFLAG_RW, &clust_hiwm, 0,
|
|
|
|
"Upper limit of number of mbuf clusters allowed in each cache");
|
2003-05-15 19:05:28 +00:00
|
|
|
SYSCTL_UINT(_kern_ipc, OID_AUTO, clust_lowm, CTLFLAG_RD, &clust_lowm, 0,
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
"Lower limit of number of mbuf clusters allowed in each cache");
|
2001-06-22 06:35:32 +00:00
|
|
|
SYSCTL_STRUCT(_kern_ipc, OID_AUTO, mbstat, CTLFLAG_RD, &mbstat, mbstat,
|
|
|
|
"Mbuf general information and statistics");
|
|
|
|
SYSCTL_OPAQUE(_kern_ipc, OID_AUTO, mb_statpcpu, CTLFLAG_RD, mb_statpcpu,
|
|
|
|
sizeof(mb_statpcpu), "S,", "Mbuf allocator per CPU statistics");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Prototypes of local allocator routines.
|
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
static void *mb_alloc_wait(struct mb_lstmngr *, short);
|
|
|
|
static struct mb_bucket *mb_pop_cont(struct mb_lstmngr *, int,
|
2001-06-22 06:35:32 +00:00
|
|
|
struct mb_pcpu_list *);
|
2001-12-23 22:04:08 +00:00
|
|
|
static void mb_reclaim(void);
|
|
|
|
static void mbuf_init(void *);
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Initial allocation numbers. Each parameter represents the number of buckets
|
2001-06-22 06:35:32 +00:00
|
|
|
* of each object that will be placed initially in each PCPU container for
|
|
|
|
* said object.
|
|
|
|
*/
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
#define NMB_MBUF_INIT 2
|
|
|
|
#define NMB_CLUST_INIT 8
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Internal flags that allow for cache locks to remain "persistent" across
|
|
|
|
* allocation and free calls. They may be used in combination.
|
|
|
|
*/
|
|
|
|
#define MBP_PERSIST 0x1 /* Return with lock still held. */
|
|
|
|
#define MBP_PERSISTENT 0x2 /* Cache lock is already held coming in. */
|
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
|
|
|
* Initialize the mbuf subsystem.
|
|
|
|
*
|
|
|
|
* We sub-divide the kmem_map into several submaps; this way, we don't have
|
|
|
|
* to worry about artificially limiting the number of mbuf or mbuf cluster
|
|
|
|
* allocations, due to fear of one type of allocation "stealing" address
|
|
|
|
* space initially reserved for another.
|
|
|
|
*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Set up both the general containers and all the PCPU containers. Populate
|
2001-06-22 06:35:32 +00:00
|
|
|
* the PCPU containers with initial numbers.
|
|
|
|
*/
|
|
|
|
MALLOC_DEFINE(M_MBUF, "mbufmgr", "mbuf subsystem management structures");
|
2001-08-03 05:05:32 +00:00
|
|
|
SYSINIT(mbuf, SI_SUB_MBUF, SI_ORDER_FIRST, mbuf_init, NULL)
|
2002-09-28 17:15:38 +00:00
|
|
|
static void
|
2001-08-03 05:05:32 +00:00
|
|
|
mbuf_init(void *dummy)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_pcpu_list *pcpu_cnt;
|
|
|
|
vm_size_t mb_map_size;
|
|
|
|
int i, j;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Set up all the submaps, for each type of object that we deal
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* with in this allocator.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_map_size = (vm_size_t)(nmbufs * MSIZE);
|
|
|
|
mb_map_size = rounddown(mb_map_size, MBUF_BUCK_SZ);
|
|
|
|
mb_list_mbuf.ml_btable = malloc((unsigned long)mb_map_size /
|
|
|
|
MBUF_BUCK_SZ * sizeof(struct mb_bucket *), M_MBUF, M_NOWAIT);
|
2001-06-22 06:35:32 +00:00
|
|
|
if (mb_list_mbuf.ml_btable == NULL)
|
|
|
|
goto bad;
|
|
|
|
mb_list_mbuf.ml_map = kmem_suballoc(kmem_map,&(mb_list_mbuf.ml_mapbase),
|
|
|
|
&(mb_list_mbuf.ml_maptop), mb_map_size);
|
2002-06-13 23:53:42 +00:00
|
|
|
mb_list_mbuf.ml_map->system_map = 1;
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_list_mbuf.ml_mapfull = 0;
|
|
|
|
mb_list_mbuf.ml_objsize = MSIZE;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_list_mbuf.ml_objbucks = MBUF_BUCK_SZ / MSIZE;
|
|
|
|
mb_list_mbuf.ml_wmhigh = &mbuf_hiwm;
|
|
|
|
mb_list_mbuf.ml_wmlow = &mbuf_lowm;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
mb_map_size = (vm_size_t)(nmbclusters * MCLBYTES);
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_map_size = rounddown(mb_map_size, CLUST_BUCK_SZ);
|
|
|
|
mb_list_clust.ml_btable = malloc((unsigned long)mb_map_size /
|
|
|
|
CLUST_BUCK_SZ * sizeof(struct mb_bucket *), M_MBUF, M_NOWAIT);
|
2001-06-22 06:35:32 +00:00
|
|
|
if (mb_list_clust.ml_btable == NULL)
|
|
|
|
goto bad;
|
|
|
|
mb_list_clust.ml_map = kmem_suballoc(kmem_map,
|
|
|
|
&(mb_list_clust.ml_mapbase), &(mb_list_clust.ml_maptop),
|
|
|
|
mb_map_size);
|
2002-06-13 23:53:42 +00:00
|
|
|
mb_list_clust.ml_map->system_map = 1;
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_list_clust.ml_mapfull = 0;
|
|
|
|
mb_list_clust.ml_objsize = MCLBYTES;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_list_clust.ml_objbucks = CLUST_BUCK_SZ / MCLBYTES;
|
|
|
|
mb_list_clust.ml_wmhigh = &clust_hiwm;
|
|
|
|
mb_list_clust.ml_wmlow = &clust_lowm;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate required general (global) containers for each object type.
|
|
|
|
*/
|
|
|
|
mb_list_mbuf.ml_genlist = malloc(sizeof(struct mb_gen_list), M_MBUF,
|
|
|
|
M_NOWAIT);
|
|
|
|
mb_list_clust.ml_genlist = malloc(sizeof(struct mb_gen_list), M_MBUF,
|
|
|
|
M_NOWAIT);
|
|
|
|
if ((mb_list_mbuf.ml_genlist == NULL) ||
|
|
|
|
(mb_list_clust.ml_genlist == NULL))
|
|
|
|
goto bad;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize condition variables and general container mutex locks.
|
|
|
|
*/
|
2002-04-04 21:03:38 +00:00
|
|
|
mtx_init(&mbuf_gen, "mbuf subsystem general lists lock", NULL, 0);
|
2001-06-22 06:35:32 +00:00
|
|
|
cv_init(&(mb_list_mbuf.ml_genlist->mgl_mstarved), "mbuf pool starved");
|
|
|
|
cv_init(&(mb_list_clust.ml_genlist->mgl_mstarved),
|
|
|
|
"mcluster pool starved");
|
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_lock =
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_lock = &mbuf_gen;
|
|
|
|
|
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Set up the general containers for each object.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_numowner =
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_numowner = MB_GENLIST_OWNER;
|
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_starved =
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_starved = 0;
|
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_objcount =
|
|
|
|
&(mb_statpcpu[MB_GENLIST_OWNER].mb_mbfree);
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_objcount =
|
|
|
|
&(mb_statpcpu[MB_GENLIST_OWNER].mb_clfree);
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_numbucks =
|
|
|
|
&(mb_statpcpu[MB_GENLIST_OWNER].mb_mbbucks);
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_numbucks =
|
|
|
|
&(mb_statpcpu[MB_GENLIST_OWNER].mb_clbucks);
|
2001-09-30 01:58:39 +00:00
|
|
|
mb_list_mbuf.ml_genlist->mb_cont.mc_types =
|
|
|
|
&(mb_statpcpu[MB_GENLIST_OWNER].mb_mbtypes[0]);
|
|
|
|
mb_list_clust.ml_genlist->mb_cont.mc_types = NULL;
|
2001-06-22 06:35:32 +00:00
|
|
|
SLIST_INIT(&(mb_list_mbuf.ml_genlist->mb_cont.mc_bhead));
|
|
|
|
SLIST_INIT(&(mb_list_clust.ml_genlist->mb_cont.mc_bhead));
|
|
|
|
|
2002-07-30 21:06:27 +00:00
|
|
|
/*
|
|
|
|
* Allocate all the required counters for clusters. This makes
|
|
|
|
* cluster allocations/deallocations much faster.
|
|
|
|
*/
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
cl_refcntmap = malloc(nmbclusters * sizeof(u_int), M_MBUF, M_NOWAIT);
|
2002-07-30 21:06:27 +00:00
|
|
|
if (cl_refcntmap == NULL)
|
|
|
|
goto bad;
|
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Initialize general mbuf statistics.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
mbstat.m_msize = MSIZE;
|
|
|
|
mbstat.m_mclbytes = MCLBYTES;
|
|
|
|
mbstat.m_minclsize = MINCLSIZE;
|
|
|
|
mbstat.m_mlen = MLEN;
|
|
|
|
mbstat.m_mhlen = MHLEN;
|
2001-09-30 01:58:39 +00:00
|
|
|
mbstat.m_numtypes = MT_NTYPES;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mbstat.m_mbperbuck = MBUF_BUCK_SZ / MSIZE;
|
|
|
|
mbstat.m_clperbuck = CLUST_BUCK_SZ / MCLBYTES;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate and initialize PCPU containers.
|
|
|
|
*/
|
2001-07-26 18:47:46 +00:00
|
|
|
for (i = 0; i < NCPU; i++) {
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
if (CPU_ABSENT(i)) {
|
|
|
|
mb_statpcpu[i].mb_active = 0;
|
2001-07-26 18:47:46 +00:00
|
|
|
continue;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
}
|
2001-07-26 18:47:46 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_list_mbuf.ml_cntlst[i] = malloc(sizeof(struct mb_pcpu_list),
|
|
|
|
M_MBUF, M_NOWAIT);
|
|
|
|
mb_list_clust.ml_cntlst[i] = malloc(sizeof(struct mb_pcpu_list),
|
|
|
|
M_MBUF, M_NOWAIT);
|
|
|
|
if ((mb_list_mbuf.ml_cntlst[i] == NULL) ||
|
|
|
|
(mb_list_clust.ml_cntlst[i] == NULL))
|
|
|
|
goto bad;
|
|
|
|
|
2002-04-04 21:03:38 +00:00
|
|
|
mtx_init(&mbuf_pcpu[i], "mbuf PCPU list lock", NULL, 0);
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_lock =
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_lock = &mbuf_pcpu[i];
|
|
|
|
|
2001-07-26 18:47:46 +00:00
|
|
|
mb_statpcpu[i].mb_active = 1;
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_numowner =
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_numowner = i;
|
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_starved =
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_starved = 0;
|
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_objcount =
|
|
|
|
&(mb_statpcpu[i].mb_mbfree);
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_objcount =
|
|
|
|
&(mb_statpcpu[i].mb_clfree);
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_numbucks =
|
|
|
|
&(mb_statpcpu[i].mb_mbbucks);
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_numbucks =
|
|
|
|
&(mb_statpcpu[i].mb_clbucks);
|
2001-09-30 01:58:39 +00:00
|
|
|
mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_types =
|
|
|
|
&(mb_statpcpu[i].mb_mbtypes[0]);
|
|
|
|
mb_list_clust.ml_cntlst[i]->mb_cont.mc_types = NULL;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
SLIST_INIT(&(mb_list_mbuf.ml_cntlst[i]->mb_cont.mc_bhead));
|
|
|
|
SLIST_INIT(&(mb_list_clust.ml_cntlst[i]->mb_cont.mc_bhead));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Perform initial allocations.
|
|
|
|
*/
|
|
|
|
pcpu_cnt = MB_GET_PCPU_LIST_NUM(&mb_list_mbuf, i);
|
|
|
|
MB_LOCK_CONT(pcpu_cnt);
|
|
|
|
for (j = 0; j < NMB_MBUF_INIT; j++) {
|
2003-02-19 05:47:46 +00:00
|
|
|
if (mb_pop_cont(&mb_list_mbuf, M_DONTWAIT, pcpu_cnt)
|
2001-06-22 06:35:32 +00:00
|
|
|
== NULL)
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
MB_UNLOCK_CONT(pcpu_cnt);
|
|
|
|
|
|
|
|
pcpu_cnt = MB_GET_PCPU_LIST_NUM(&mb_list_clust, i);
|
|
|
|
MB_LOCK_CONT(pcpu_cnt);
|
|
|
|
for (j = 0; j < NMB_CLUST_INIT; j++) {
|
2003-02-19 05:47:46 +00:00
|
|
|
if (mb_pop_cont(&mb_list_clust, M_DONTWAIT, pcpu_cnt)
|
2001-06-22 06:35:32 +00:00
|
|
|
== NULL)
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
MB_UNLOCK_CONT(pcpu_cnt);
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
bad:
|
2001-08-03 05:05:32 +00:00
|
|
|
panic("mbuf_init(): failed to initialize mbuf subsystem!");
|
2001-06-22 06:35:32 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Populate a given mbuf PCPU container with a bucket full of fresh new
|
2001-12-23 22:04:08 +00:00
|
|
|
* buffers. Return a pointer to the new bucket (already in the container if
|
2001-06-22 06:35:32 +00:00
|
|
|
* successful), or return NULL on failure.
|
|
|
|
*
|
|
|
|
* LOCKING NOTES:
|
|
|
|
* PCPU container lock must be held when this is called.
|
|
|
|
* The lock is dropped here so that we can cleanly call the underlying VM
|
2001-12-23 22:04:08 +00:00
|
|
|
* code. If we fail, we return with no locks held. If we succeed (i.e., return
|
2001-06-22 06:35:32 +00:00
|
|
|
* non-NULL), we return with the PCPU lock held, ready for allocation from
|
|
|
|
* the returned bucket.
|
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
static struct mb_bucket *
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_pop_cont(struct mb_lstmngr *mb_list, int how, struct mb_pcpu_list *cnt_lst)
|
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_bucket *bucket;
|
|
|
|
caddr_t p;
|
|
|
|
int i;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* If our object's (finite) map is starved now (i.e., no more address
|
2001-06-22 06:35:32 +00:00
|
|
|
* space), bail out now.
|
|
|
|
*/
|
|
|
|
if (mb_list->ml_mapfull)
|
|
|
|
return (NULL);
|
|
|
|
|
|
|
|
bucket = malloc(sizeof(struct mb_bucket) +
|
2003-04-14 16:04:10 +00:00
|
|
|
mb_list->ml_objbucks * sizeof(void *), M_MBUF, MBTOM(how));
|
2001-06-22 06:35:32 +00:00
|
|
|
if (bucket == NULL)
|
|
|
|
return (NULL);
|
|
|
|
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
p = (caddr_t)kmem_malloc(mb_list->ml_map, mb_list->ml_objsize *
|
2003-04-14 16:04:10 +00:00
|
|
|
mb_list->ml_objbucks, MBTOM(how));
|
2001-06-22 06:35:32 +00:00
|
|
|
if (p == NULL) {
|
|
|
|
free(bucket, M_MBUF);
|
2003-02-19 05:47:46 +00:00
|
|
|
if (how == M_TRYWAIT)
|
2001-11-25 04:42:54 +00:00
|
|
|
mb_list->ml_mapfull = 1;
|
2001-06-22 06:35:32 +00:00
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
bucket->mb_numfree = 0;
|
|
|
|
mb_list->ml_btable[MB_BUCKET_INDX(p, mb_list)] = bucket;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
for (i = 0; i < mb_list->ml_objbucks; i++) {
|
2001-06-22 06:35:32 +00:00
|
|
|
bucket->mb_free[i] = p;
|
|
|
|
bucket->mb_numfree++;
|
|
|
|
p += mb_list->ml_objsize;
|
|
|
|
}
|
|
|
|
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
bucket->mb_owner = cnt_lst->mb_cont.mc_numowner;
|
|
|
|
SLIST_INSERT_HEAD(&(cnt_lst->mb_cont.mc_bhead), bucket, mb_blist);
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
(*(cnt_lst->mb_cont.mc_numbucks))++;
|
2001-06-22 06:35:32 +00:00
|
|
|
*(cnt_lst->mb_cont.mc_objcount) += bucket->mb_numfree;
|
|
|
|
|
|
|
|
return (bucket);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
* Allocate a network buffer.
|
2001-12-23 22:04:08 +00:00
|
|
|
* The general case is very easy. Complications only arise if our PCPU
|
|
|
|
* container is empty. Things get worse if the PCPU container is empty,
|
2001-06-22 06:35:32 +00:00
|
|
|
* the general container is empty, and we've run out of address space
|
2003-02-19 05:47:46 +00:00
|
|
|
* in our map; then we try to block if we're willing to (M_TRYWAIT).
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
static __inline
|
|
|
|
void *
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb_alloc(struct mb_lstmngr *mb_list, int how, short type, short persist,
|
|
|
|
int *pers_list)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
static int last_report;
|
|
|
|
struct mb_pcpu_list *cnt_lst;
|
|
|
|
struct mb_bucket *bucket;
|
|
|
|
void *m;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2003-03-10 20:24:54 +00:00
|
|
|
#ifdef INVARIANTS
|
2003-03-10 19:39:53 +00:00
|
|
|
int flags;
|
|
|
|
|
|
|
|
flags = how & (M_WAITOK | M_NOWAIT | M_DONTWAIT | M_TRYWAIT);
|
|
|
|
if (flags != M_DONTWAIT && flags != M_TRYWAIT) {
|
|
|
|
static struct timeval lasterr;
|
|
|
|
static int curerr;
|
|
|
|
if (ppsratecheck(&lasterr, &curerr, 1)) {
|
|
|
|
printf("Bad mbuf alloc flags: %x\n", flags);
|
|
|
|
backtrace();
|
|
|
|
how = M_TRYWAIT;
|
|
|
|
}
|
|
|
|
}
|
2003-05-29 18:38:24 +00:00
|
|
|
if ((flags & M_DONTWAIT) == 0)
|
|
|
|
GIANT_REQUIRED;
|
2003-03-10 20:24:54 +00:00
|
|
|
#endif
|
2003-03-10 19:39:53 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
m = NULL;
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
if ((persist & MBP_PERSISTENT) != 0) {
|
|
|
|
/*
|
|
|
|
* If we're a "persistent" call, then the per-CPU #(pers_list)
|
|
|
|
* cache lock is already held, and we just need to refer to
|
|
|
|
* the correct cache descriptor.
|
|
|
|
*/
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST_NUM(mb_list, *pers_list);
|
|
|
|
} else {
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST(mb_list);
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
if ((bucket = SLIST_FIRST(&(cnt_lst->mb_cont.mc_bhead))) != NULL) {
|
|
|
|
/*
|
|
|
|
* This is the easy allocation case. We just grab an object
|
|
|
|
* from a bucket in the PCPU container. At worst, we
|
|
|
|
* have just emptied the bucket and so we remove it
|
|
|
|
* from the container.
|
|
|
|
*/
|
|
|
|
MB_GET_OBJECT(m, bucket, cnt_lst);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
MB_MBTYPES_INC(cnt_lst, type, 1);
|
|
|
|
|
|
|
|
/* If asked to persist, do not drop the lock. */
|
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
else
|
|
|
|
*pers_list = cnt_lst->mb_cont.mc_numowner;
|
2001-06-22 06:35:32 +00:00
|
|
|
} else {
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_gen_list *gen_list;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This is the less-common more difficult case. We must
|
|
|
|
* first verify if the general list has anything for us
|
|
|
|
* and if that also fails, we must allocate a page from
|
|
|
|
* the map and create a new bucket to place in our PCPU
|
|
|
|
* container (already locked). If the map is starved then
|
|
|
|
* we're really in for trouble, as we have to wait on
|
|
|
|
* the general container's condition variable.
|
|
|
|
*/
|
|
|
|
gen_list = MB_GET_GEN_LIST(mb_list);
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
|
|
|
|
if ((bucket = SLIST_FIRST(&(gen_list->mb_cont.mc_bhead)))
|
|
|
|
!= NULL) {
|
|
|
|
/*
|
|
|
|
* Give ownership of the bucket to our CPU's
|
|
|
|
* container, but only actually put the bucket
|
|
|
|
* in the container if it doesn't become free
|
|
|
|
* upon removing an mbuf from it.
|
|
|
|
*/
|
|
|
|
SLIST_REMOVE_HEAD(&(gen_list->mb_cont.mc_bhead),
|
|
|
|
mb_blist);
|
|
|
|
bucket->mb_owner = cnt_lst->mb_cont.mc_numowner;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
(*(gen_list->mb_cont.mc_numbucks))--;
|
|
|
|
(*(cnt_lst->mb_cont.mc_numbucks))++;
|
2001-06-22 06:35:32 +00:00
|
|
|
*(gen_list->mb_cont.mc_objcount) -= bucket->mb_numfree;
|
|
|
|
bucket->mb_numfree--;
|
|
|
|
m = bucket->mb_free[(bucket->mb_numfree)];
|
|
|
|
if (bucket->mb_numfree == 0) {
|
|
|
|
SLIST_NEXT(bucket, mb_blist) = NULL;
|
|
|
|
bucket->mb_owner |= MB_BUCKET_FREE;
|
|
|
|
} else {
|
|
|
|
SLIST_INSERT_HEAD(&(cnt_lst->mb_cont.mc_bhead),
|
|
|
|
bucket, mb_blist);
|
|
|
|
*(cnt_lst->mb_cont.mc_objcount) +=
|
|
|
|
bucket->mb_numfree;
|
|
|
|
}
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_INC(cnt_lst, type, 1);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
|
|
|
|
/* If asked to persist, do not drop the lock. */
|
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
else
|
|
|
|
*pers_list = cnt_lst->mb_cont.mc_numowner;
|
2001-06-22 06:35:32 +00:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* We'll have to allocate a new page.
|
|
|
|
*/
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
bucket = mb_pop_cont(mb_list, how, cnt_lst);
|
|
|
|
if (bucket != NULL) {
|
2002-03-03 22:10:04 +00:00
|
|
|
MB_GET_OBJECT(m, bucket, cnt_lst);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_INC(cnt_lst, type, 1);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
|
|
|
|
/* If asked to persist, do not drop the lock. */
|
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
else
|
|
|
|
*pers_list=cnt_lst->mb_cont.mc_numowner;
|
2001-06-22 06:35:32 +00:00
|
|
|
} else {
|
2003-02-19 05:47:46 +00:00
|
|
|
if (how == M_TRYWAIT) {
|
2001-12-01 00:21:30 +00:00
|
|
|
/*
|
2001-12-23 22:04:08 +00:00
|
|
|
* Absolute worst-case scenario.
|
|
|
|
* We block if we're willing to, but
|
|
|
|
* only after trying to steal from
|
|
|
|
* other lists.
|
2001-12-01 00:21:30 +00:00
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
m = mb_alloc_wait(mb_list, type);
|
|
|
|
} else {
|
2001-06-22 06:35:32 +00:00
|
|
|
/* XXX: No consistency. */
|
|
|
|
mbstat.m_drops++;
|
2001-12-23 22:04:08 +00:00
|
|
|
|
2001-12-01 00:21:30 +00:00
|
|
|
if (ticks < last_report ||
|
|
|
|
(ticks - last_report) >= hz) {
|
|
|
|
last_report = ticks;
|
|
|
|
printf(
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
"All mbufs or mbuf clusters exhausted, please see tuning(7).\n");
|
2001-12-01 00:21:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
}
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
if (m != NULL && (persist & MBP_PERSIST) != 0) {
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST(mb_list);
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
*pers_list=cnt_lst->mb_cont.mc_numowner;
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return (m);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is the worst-case scenario called only if we're allocating with
|
2003-02-19 05:47:46 +00:00
|
|
|
* M_TRYWAIT. We first drain all the protocols, then try to find an mbuf
|
2001-12-23 22:04:08 +00:00
|
|
|
* by looking in every PCPU container. If we're still unsuccesful, we
|
2001-06-22 06:35:32 +00:00
|
|
|
* try the general container one last time and possibly block on our
|
|
|
|
* starved cv.
|
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
static void *
|
2001-09-30 01:58:39 +00:00
|
|
|
mb_alloc_wait(struct mb_lstmngr *mb_list, short type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_pcpu_list *cnt_lst;
|
|
|
|
struct mb_gen_list *gen_list;
|
|
|
|
struct mb_bucket *bucket;
|
|
|
|
void *m;
|
|
|
|
int i, cv_ret;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to reclaim mbuf-related objects (mbufs, clusters).
|
|
|
|
*/
|
|
|
|
mb_reclaim();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Cycle all the PCPU containers. Increment starved counts if found
|
|
|
|
* empty.
|
|
|
|
*/
|
2001-07-26 18:47:46 +00:00
|
|
|
for (i = 0; i < NCPU; i++) {
|
|
|
|
if (CPU_ABSENT(i))
|
|
|
|
continue;
|
2001-06-22 06:35:32 +00:00
|
|
|
cnt_lst = MB_GET_PCPU_LIST_NUM(mb_list, i);
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If container is non-empty, get a single object from it.
|
|
|
|
* If empty, increment starved count.
|
|
|
|
*/
|
|
|
|
if ((bucket = SLIST_FIRST(&(cnt_lst->mb_cont.mc_bhead))) !=
|
|
|
|
NULL) {
|
|
|
|
MB_GET_OBJECT(m, bucket, cnt_lst);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_INC(cnt_lst, type, 1);
|
2001-06-22 06:35:32 +00:00
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
mbstat.m_wait++; /* XXX: No consistency. */
|
|
|
|
return (m);
|
|
|
|
} else
|
|
|
|
cnt_lst->mb_cont.mc_starved++;
|
|
|
|
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We're still here, so that means it's time to get the general
|
|
|
|
* container lock, check it one more time (now that mb_reclaim()
|
|
|
|
* has been called) and if we still get nothing, block on the cv.
|
|
|
|
*/
|
|
|
|
gen_list = MB_GET_GEN_LIST(mb_list);
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
if ((bucket = SLIST_FIRST(&(gen_list->mb_cont.mc_bhead))) != NULL) {
|
|
|
|
MB_GET_OBJECT(m, bucket, gen_list);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_INC(gen_list, type, 1);
|
2001-06-22 06:35:32 +00:00
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
mbstat.m_wait++; /* XXX: No consistency. */
|
|
|
|
return (m);
|
|
|
|
}
|
|
|
|
|
|
|
|
gen_list->mb_cont.mc_starved++;
|
|
|
|
cv_ret = cv_timedwait(&(gen_list->mgl_mstarved),
|
|
|
|
gen_list->mb_cont.mc_lock, mbuf_wait);
|
|
|
|
gen_list->mb_cont.mc_starved--;
|
|
|
|
|
|
|
|
if ((cv_ret == 0) &&
|
|
|
|
((bucket = SLIST_FIRST(&(gen_list->mb_cont.mc_bhead))) != NULL)) {
|
|
|
|
MB_GET_OBJECT(m, bucket, gen_list);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_INC(gen_list, type, 1);
|
2001-06-22 06:35:32 +00:00
|
|
|
mbstat.m_wait++; /* XXX: No consistency. */
|
|
|
|
} else {
|
|
|
|
mbstat.m_drops++; /* XXX: No consistency. */
|
|
|
|
m = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
|
|
|
|
return (m);
|
|
|
|
}
|
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
/*-
|
2001-06-22 06:35:32 +00:00
|
|
|
* Free an object to its rightful container.
|
|
|
|
* In the very general case, this operation is really very easy.
|
|
|
|
* Complications arise primarily if:
|
|
|
|
* (a) We've hit the high limit on number of free objects allowed in
|
|
|
|
* our PCPU container.
|
|
|
|
* (b) We're in a critical situation where our container has been
|
|
|
|
* marked 'starved' and we need to issue wakeups on the starved
|
|
|
|
* condition variable.
|
|
|
|
* (c) Minor (odd) cases: our bucket has migrated while we were
|
|
|
|
* waiting for the lock; our bucket is in the general container;
|
|
|
|
* our bucket is empty.
|
|
|
|
*/
|
|
|
|
static __inline
|
|
|
|
void
|
2002-07-23 14:55:33 +00:00
|
|
|
mb_free(struct mb_lstmngr *mb_list, void *m, short type, short persist,
|
|
|
|
int *pers_list)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_pcpu_list *cnt_lst;
|
|
|
|
struct mb_gen_list *gen_list;
|
|
|
|
struct mb_bucket *bucket;
|
|
|
|
u_int owner;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
bucket = mb_list->ml_btable[MB_BUCKET_INDX(m, mb_list)];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure that if after we lock the bucket's present container the
|
|
|
|
* bucket has migrated, that we drop the lock and get the new one.
|
|
|
|
*/
|
|
|
|
retry_lock:
|
|
|
|
owner = bucket->mb_owner & ~MB_BUCKET_FREE;
|
|
|
|
switch (owner) {
|
|
|
|
case MB_GENLIST_OWNER:
|
|
|
|
gen_list = MB_GET_GEN_LIST(mb_list);
|
2002-07-23 14:55:33 +00:00
|
|
|
if (((persist & MBP_PERSISTENT) != 0) && (*pers_list >= 0)) {
|
|
|
|
if (*pers_list != MB_GENLIST_OWNER) {
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST_NUM(mb_list,
|
|
|
|
*pers_list);
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
if (owner != (bucket->mb_owner & ~MB_BUCKET_FREE)) {
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
2002-07-23 14:55:33 +00:00
|
|
|
*pers_list = -1;
|
2001-06-22 06:35:32 +00:00
|
|
|
goto retry_lock;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we're intended for the general container, this is
|
|
|
|
* real easy: no migrating required. The only `bogon'
|
|
|
|
* is that we're now contending with all the threads
|
|
|
|
* dealing with the general list, but this is expected.
|
|
|
|
*/
|
|
|
|
MB_PUT_OBJECT(m, bucket, gen_list);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_DEC(gen_list, type, 1);
|
Fix a potential bucket leak where when freeing to an empty bucket
we failed to put the bucket back into the general cache/container.
Also, fix a bad assumption. There was a KASSERT() that aimed to
guarantee that whenever the pcpu container's mc_starved was > 0,
that whatever the bucket we were freeing to was an empty bucket,
assuming it belonged to the pcpu container cache. However, there
is at least one case where this is not true anymore; consider:
1) All containers empty, next thread to try to alloc will touch
a pcpu container, notice it's empty, and increment the pcpu
container's mc_starved.
2) Some other thread frees an mbuf belonging to a bucket in
the general cache/container. Then it frees another mbuf
belonging to the same bucket (still in gen container).
3) Some third thread tries to allocate an mbuf from the pcpu
container and, since empty, grabs one mbuf now available
in the general cache and moves the non-empty bucket from
which it took 1 mbuf and to which the thread in (2) freed
to, and moves it to the pcpu container.
4) A final thread tries to free an mbuf belonging to the
NON-EMPTY bucket mentionned in (2) and (3) and, since
the pcpu container's mc_starved is > 0, but the bucket
is obviously non-empty, it trips on the KASSERT.
This meant that one could potentially get a panic in some
cases when out of mbufs and clusters. The problem could
be mitigated by commenting out some cv_signal() calls,
but I'm assuming that was pure coincidence and this is
the correct fix.
2003-06-03 19:19:13 +00:00
|
|
|
if (bucket->mb_owner & MB_BUCKET_FREE) {
|
|
|
|
SLIST_INSERT_HEAD(&(gen_list->mb_cont.mc_bhead),
|
|
|
|
bucket, mb_blist);
|
|
|
|
bucket->mb_owner = MB_GENLIST_OWNER;
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
if (gen_list->mb_cont.mc_starved > 0)
|
|
|
|
cv_signal(&(gen_list->mgl_mstarved));
|
2002-07-23 14:55:33 +00:00
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
else
|
|
|
|
*pers_list = MB_GENLIST_OWNER;
|
2001-06-22 06:35:32 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST_NUM(mb_list, owner);
|
2002-07-23 14:55:33 +00:00
|
|
|
if (((persist & MBP_PERSISTENT) != 0) && (*pers_list >= 0)) {
|
|
|
|
if (*pers_list == MB_GENLIST_OWNER) {
|
|
|
|
gen_list = MB_GET_GEN_LIST(mb_list);
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
} else {
|
|
|
|
cnt_lst = MB_GET_PCPU_LIST_NUM(mb_list,
|
|
|
|
*pers_list);
|
|
|
|
owner = *pers_list;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
MB_LOCK_CONT(cnt_lst);
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
if (owner != (bucket->mb_owner & ~MB_BUCKET_FREE)) {
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
2002-07-23 14:55:33 +00:00
|
|
|
*pers_list = -1;
|
2001-06-22 06:35:32 +00:00
|
|
|
goto retry_lock;
|
|
|
|
}
|
|
|
|
|
|
|
|
MB_PUT_OBJECT(m, bucket, cnt_lst);
|
2001-09-30 01:58:39 +00:00
|
|
|
MB_MBTYPES_DEC(cnt_lst, type, 1);
|
Fix a potential bucket leak where when freeing to an empty bucket
we failed to put the bucket back into the general cache/container.
Also, fix a bad assumption. There was a KASSERT() that aimed to
guarantee that whenever the pcpu container's mc_starved was > 0,
that whatever the bucket we were freeing to was an empty bucket,
assuming it belonged to the pcpu container cache. However, there
is at least one case where this is not true anymore; consider:
1) All containers empty, next thread to try to alloc will touch
a pcpu container, notice it's empty, and increment the pcpu
container's mc_starved.
2) Some other thread frees an mbuf belonging to a bucket in
the general cache/container. Then it frees another mbuf
belonging to the same bucket (still in gen container).
3) Some third thread tries to allocate an mbuf from the pcpu
container and, since empty, grabs one mbuf now available
in the general cache and moves the non-empty bucket from
which it took 1 mbuf and to which the thread in (2) freed
to, and moves it to the pcpu container.
4) A final thread tries to free an mbuf belonging to the
NON-EMPTY bucket mentionned in (2) and (3) and, since
the pcpu container's mc_starved is > 0, but the bucket
is obviously non-empty, it trips on the KASSERT.
This meant that one could potentially get a panic in some
cases when out of mbufs and clusters. The problem could
be mitigated by commenting out some cv_signal() calls,
but I'm assuming that was pure coincidence and this is
the correct fix.
2003-06-03 19:19:13 +00:00
|
|
|
if ((*(cnt_lst->mb_cont.mc_objcount) > *(mb_list->ml_wmhigh)) ||
|
|
|
|
(cnt_lst->mb_cont.mc_starved > 0)) {
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
|
|
|
* We've hit the high limit of allowed numbers of mbufs
|
Fix a potential bucket leak where when freeing to an empty bucket
we failed to put the bucket back into the general cache/container.
Also, fix a bad assumption. There was a KASSERT() that aimed to
guarantee that whenever the pcpu container's mc_starved was > 0,
that whatever the bucket we were freeing to was an empty bucket,
assuming it belonged to the pcpu container cache. However, there
is at least one case where this is not true anymore; consider:
1) All containers empty, next thread to try to alloc will touch
a pcpu container, notice it's empty, and increment the pcpu
container's mc_starved.
2) Some other thread frees an mbuf belonging to a bucket in
the general cache/container. Then it frees another mbuf
belonging to the same bucket (still in gen container).
3) Some third thread tries to allocate an mbuf from the pcpu
container and, since empty, grabs one mbuf now available
in the general cache and moves the non-empty bucket from
which it took 1 mbuf and to which the thread in (2) freed
to, and moves it to the pcpu container.
4) A final thread tries to free an mbuf belonging to the
NON-EMPTY bucket mentionned in (2) and (3) and, since
the pcpu container's mc_starved is > 0, but the bucket
is obviously non-empty, it trips on the KASSERT.
This meant that one could potentially get a panic in some
cases when out of mbufs and clusters. The problem could
be mitigated by commenting out some cv_signal() calls,
but I'm assuming that was pure coincidence and this is
the correct fix.
2003-06-03 19:19:13 +00:00
|
|
|
* on this PCPU list or we've been flagged that we need
|
|
|
|
* to transfer a bucket over to the general cache.
|
|
|
|
* We must now migrate a bucket over to the general
|
|
|
|
* container.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
gen_list = MB_GET_GEN_LIST(mb_list);
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
if ((bucket->mb_owner & MB_BUCKET_FREE) == 0) {
|
|
|
|
bucket =
|
|
|
|
SLIST_FIRST(&(cnt_lst->mb_cont.mc_bhead));
|
|
|
|
SLIST_REMOVE_HEAD(&(cnt_lst->mb_cont.mc_bhead),
|
|
|
|
mb_blist);
|
|
|
|
}
|
|
|
|
SLIST_INSERT_HEAD(&(gen_list->mb_cont.mc_bhead),
|
|
|
|
bucket, mb_blist);
|
|
|
|
bucket->mb_owner = MB_GENLIST_OWNER;
|
|
|
|
*(cnt_lst->mb_cont.mc_objcount) -= bucket->mb_numfree;
|
|
|
|
*(gen_list->mb_cont.mc_objcount) += bucket->mb_numfree;
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
(*(cnt_lst->mb_cont.mc_numbucks))--;
|
|
|
|
(*(gen_list->mb_cont.mc_numbucks))++;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2001-09-30 01:58:39 +00:00
|
|
|
/*
|
|
|
|
* While we're at it, transfer some of the mbtypes
|
|
|
|
* "count load" onto the general list's mbtypes
|
|
|
|
* array, seeing as how we're moving the bucket
|
|
|
|
* there now, meaning that the freeing of objects
|
|
|
|
* there will now decrement the _general list's_
|
|
|
|
* mbtypes counters, and no longer our PCPU list's
|
|
|
|
* mbtypes counters. We do this for the type presently
|
|
|
|
* being freed in an effort to keep the mbtypes
|
|
|
|
* counters approximately balanced across all lists.
|
|
|
|
*/
|
o Allow "buckets" in mb_alloc to be differently sized (according to
compile-time constants). That is, a "bucket" now is not necessarily
a page-worth of mbufs or clusters, but it is MBUF_BUCK_SZ, CLUS_BUCK_SZ
worth of mbufs, clusters.
o Rename {mbuf,clust}_limit to {mbuf,clust}_hiwm and introduce
{mbuf,clust}_lowm, which currently has no effect but will be used
to set the low watermarks.
o Fix netstat so that it can deal with the differently-sized buckets
and teach it about the low watermarks too.
o Make sure the per-cpu stats for an absent CPU has mb_active set to 0,
explicitly.
o Get rid of the allocate refcounts from mbuf map mess. Instead,
just malloc() the refcounts in one shot from mbuf_init()
o Clean up / update comments in subr_mbuf.c
2003-02-20 04:26:58 +00:00
|
|
|
MB_MBTYPES_DEC(cnt_lst, type,
|
|
|
|
mb_list->ml_objbucks - bucket->mb_numfree);
|
|
|
|
MB_MBTYPES_INC(gen_list, type,
|
|
|
|
mb_list->ml_objbucks - bucket->mb_numfree);
|
Fix a potential bucket leak where when freeing to an empty bucket
we failed to put the bucket back into the general cache/container.
Also, fix a bad assumption. There was a KASSERT() that aimed to
guarantee that whenever the pcpu container's mc_starved was > 0,
that whatever the bucket we were freeing to was an empty bucket,
assuming it belonged to the pcpu container cache. However, there
is at least one case where this is not true anymore; consider:
1) All containers empty, next thread to try to alloc will touch
a pcpu container, notice it's empty, and increment the pcpu
container's mc_starved.
2) Some other thread frees an mbuf belonging to a bucket in
the general cache/container. Then it frees another mbuf
belonging to the same bucket (still in gen container).
3) Some third thread tries to allocate an mbuf from the pcpu
container and, since empty, grabs one mbuf now available
in the general cache and moves the non-empty bucket from
which it took 1 mbuf and to which the thread in (2) freed
to, and moves it to the pcpu container.
4) A final thread tries to free an mbuf belonging to the
NON-EMPTY bucket mentionned in (2) and (3) and, since
the pcpu container's mc_starved is > 0, but the bucket
is obviously non-empty, it trips on the KASSERT.
This meant that one could potentially get a panic in some
cases when out of mbufs and clusters. The problem could
be mitigated by commenting out some cv_signal() calls,
but I'm assuming that was pure coincidence and this is
the correct fix.
2003-06-03 19:19:13 +00:00
|
|
|
|
|
|
|
if (cnt_lst->mb_cont.mc_starved > 0) {
|
|
|
|
/*
|
|
|
|
* Determine whether or not to keep
|
|
|
|
* transferring buckets to the general list
|
|
|
|
* or whether we've transferred enough already.
|
|
|
|
* The thread that is blocked may end up waking
|
|
|
|
* up in the meantime, but transferring an
|
|
|
|
* extra bucket in a constrained situation
|
|
|
|
* is not so bad, as we're likely to need
|
|
|
|
* it soon anyway.
|
|
|
|
*/
|
|
|
|
if (gen_list->mb_cont.mc_starved > 0) {
|
|
|
|
cnt_lst->mb_cont.mc_starved--;
|
|
|
|
cv_signal(&(gen_list->mgl_mstarved));
|
|
|
|
} else
|
|
|
|
cnt_lst->mb_cont.mc_starved = 0;
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
MB_UNLOCK_CONT(gen_list);
|
2002-07-23 14:55:33 +00:00
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
else
|
|
|
|
*pers_list = owner;
|
2001-06-22 06:35:32 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bucket->mb_owner & MB_BUCKET_FREE) {
|
|
|
|
SLIST_INSERT_HEAD(&(cnt_lst->mb_cont.mc_bhead),
|
|
|
|
bucket, mb_blist);
|
|
|
|
bucket->mb_owner = cnt_lst->mb_cont.mc_numowner;
|
|
|
|
}
|
|
|
|
|
2002-07-23 14:55:33 +00:00
|
|
|
if ((persist & MBP_PERSIST) == 0)
|
|
|
|
MB_UNLOCK_CONT(cnt_lst);
|
|
|
|
else
|
|
|
|
*pers_list = owner;
|
2001-06-22 06:35:32 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Drain protocols in hopes to free up some resources.
|
|
|
|
*
|
|
|
|
* LOCKING NOTES:
|
2001-12-23 22:04:08 +00:00
|
|
|
* No locks should be held when this is called. The drain routines have to
|
2001-06-22 06:35:32 +00:00
|
|
|
* presently acquire some locks which raises the possibility of lock order
|
|
|
|
* violation if we're holding any mutex if that mutex is acquired in reverse
|
|
|
|
* order relative to one of the locks in the drain routines.
|
|
|
|
*/
|
2001-12-23 22:04:08 +00:00
|
|
|
static void
|
2001-06-22 06:35:32 +00:00
|
|
|
mb_reclaim(void)
|
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct domain *dp;
|
|
|
|
struct protosw *pr;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2003-03-04 21:03:05 +00:00
|
|
|
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK | WARN_PANIC, NULL,
|
|
|
|
"mb_reclaim()");
|
2001-06-22 06:35:32 +00:00
|
|
|
|
|
|
|
mbstat.m_drain++; /* XXX: No consistency. */
|
|
|
|
|
2001-12-23 22:04:08 +00:00
|
|
|
for (dp = domains; dp != NULL; dp = dp->dom_next)
|
2001-06-22 06:35:32 +00:00
|
|
|
for (pr = dp->dom_protosw; pr < dp->dom_protoswNPROTOSW; pr++)
|
2001-12-23 22:04:08 +00:00
|
|
|
if (pr->pr_drain != NULL)
|
2001-06-22 06:35:32 +00:00
|
|
|
(*pr->pr_drain)();
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/******************************************************************************
|
|
|
|
* Internal setup macros.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
|
|
|
|
#define _mb_setup(m, type) do { \
|
|
|
|
(m)->m_type = (type); \
|
|
|
|
(m)->m_next = NULL; \
|
|
|
|
(m)->m_nextpkt = NULL; \
|
|
|
|
(m)->m_data = (m)->m_dat; \
|
|
|
|
(m)->m_flags = 0; \
|
2001-06-22 06:35:32 +00:00
|
|
|
} while (0)
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
#define _mbhdr_setup(m, type) do { \
|
|
|
|
(m)->m_type = (type); \
|
|
|
|
(m)->m_next = NULL; \
|
|
|
|
(m)->m_nextpkt = NULL; \
|
|
|
|
(m)->m_data = (m)->m_pktdat; \
|
|
|
|
(m)->m_flags = M_PKTHDR; \
|
|
|
|
(m)->m_pkthdr.rcvif = NULL; \
|
|
|
|
(m)->m_pkthdr.csum_flags = 0; \
|
2002-10-16 01:54:46 +00:00
|
|
|
SLIST_INIT(&(m)->m_pkthdr.tags); \
|
2001-06-22 06:35:32 +00:00
|
|
|
} while (0)
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
#define _mcl_setup(m) do { \
|
|
|
|
(m)->m_data = (m)->m_ext.ext_buf; \
|
|
|
|
(m)->m_flags |= M_EXT; \
|
|
|
|
(m)->m_ext.ext_free = NULL; \
|
|
|
|
(m)->m_ext.ext_args = NULL; \
|
|
|
|
(m)->m_ext.ext_size = MCLBYTES; \
|
|
|
|
(m)->m_ext.ext_type = EXT_CLUSTER; \
|
2001-06-22 06:35:32 +00:00
|
|
|
} while (0)
|
|
|
|
|
2002-07-30 21:06:27 +00:00
|
|
|
#define _mext_init_ref(m, ref) do { \
|
2002-08-08 13:29:32 +00:00
|
|
|
(m)->m_ext.ref_cnt = ((ref) == NULL) ? \
|
2002-08-08 13:31:57 +00:00
|
|
|
malloc(sizeof(u_int), M_MBUF, M_NOWAIT) : (u_int *)(ref); \
|
2001-06-22 06:35:32 +00:00
|
|
|
if ((m)->m_ext.ref_cnt != NULL) { \
|
|
|
|
*((m)->m_ext.ref_cnt) = 0; \
|
|
|
|
MEXT_ADD_REF((m)); \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
2002-07-30 21:06:27 +00:00
|
|
|
#define cl2ref(cl) \
|
2003-02-20 03:01:04 +00:00
|
|
|
(((uintptr_t)(cl) - (uintptr_t)mb_list_clust.ml_mapbase) >> MCLSHIFT)
|
2002-07-30 21:06:27 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
#define _mext_dealloc_ref(m) \
|
2003-01-02 21:16:50 +00:00
|
|
|
if ((m)->m_ext.ext_type != EXT_EXTREF) \
|
|
|
|
free((m)->m_ext.ref_cnt, M_MBUF)
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/******************************************************************************
|
|
|
|
* Internal routines.
|
|
|
|
*
|
|
|
|
* Because mb_alloc() and mb_free() are inlines (to keep the common
|
|
|
|
* cases down to a maximum of one function call), below are a few
|
|
|
|
* routines used only internally for the sole purpose of making certain
|
|
|
|
* functions smaller.
|
|
|
|
*
|
|
|
|
* - _mext_free(): frees associated storage when the ref. count is
|
|
|
|
* exactly one and we're freeing.
|
|
|
|
*
|
|
|
|
* - _mgetm_internal(): common "persistent-lock" routine that allocates
|
|
|
|
* an mbuf and a cluster in one shot, but where the lock is already
|
|
|
|
* held coming in (which is what makes it different from the exported
|
|
|
|
* m_getcl()). The lock is dropped when done. This is used by m_getm()
|
|
|
|
* and, therefore, is very m_getm()-specific.
|
|
|
|
*/
|
2002-07-23 14:55:33 +00:00
|
|
|
static struct mbuf *_mgetm_internal(int, short, short, int);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
void
|
|
|
|
_mext_free(struct mbuf *mb)
|
|
|
|
{
|
|
|
|
|
2002-07-30 21:06:27 +00:00
|
|
|
if (mb->m_ext.ext_type == EXT_CLUSTER) {
|
2002-07-23 14:55:33 +00:00
|
|
|
mb_free(&mb_list_clust, (caddr_t)mb->m_ext.ext_buf, MT_NOTMBUF,
|
|
|
|
0, NULL);
|
2002-07-30 21:06:27 +00:00
|
|
|
} else {
|
2001-06-22 06:35:32 +00:00
|
|
|
(*(mb->m_ext.ext_free))(mb->m_ext.ext_buf, mb->m_ext.ext_args);
|
2002-07-30 21:06:27 +00:00
|
|
|
_mext_dealloc_ref(mb);
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
static struct mbuf *
|
2002-07-23 14:55:33 +00:00
|
|
|
_mgetm_internal(int how, short type, short persist, int cchnum)
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
{
|
|
|
|
struct mbuf *mb;
|
|
|
|
|
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type, persist,&cchnum);
|
|
|
|
if (mb == NULL)
|
|
|
|
return NULL;
|
|
|
|
_mb_setup(mb, type);
|
|
|
|
|
|
|
|
if ((persist & MBP_PERSIST) != 0) {
|
|
|
|
mb->m_ext.ext_buf = (caddr_t)mb_alloc(&mb_list_clust,
|
|
|
|
how, MT_NOTMBUF, MBP_PERSISTENT, &cchnum);
|
|
|
|
if (mb->m_ext.ext_buf == NULL) {
|
|
|
|
(void)m_free(mb);
|
|
|
|
mb = NULL;
|
|
|
|
}
|
2002-07-30 21:06:27 +00:00
|
|
|
_mcl_setup(mb);
|
|
|
|
_mext_init_ref(mb, &cl_refcntmap[cl2ref(mb->m_ext.ext_buf)]);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************************
|
|
|
|
* Exported buffer allocation and de-allocation routines.
|
|
|
|
*/
|
|
|
|
|
2001-06-22 06:35:32 +00:00
|
|
|
/*
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* Allocate and return a single (normal) mbuf. NULL is returned on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
2001-06-22 06:35:32 +00:00
|
|
|
*/
|
|
|
|
struct mbuf *
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
m_get(int how, short type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mbuf *mb;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type, 0, NULL);
|
|
|
|
if (mb != NULL)
|
|
|
|
_mb_setup(mb, type);
|
2001-06-22 06:35:32 +00:00
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Allocate a given length worth of mbufs and/or clusters (whatever fits
|
|
|
|
* best) and return a pointer to the top of the allocated chain. If an
|
|
|
|
* existing mbuf chain is provided, then we will append the new chain
|
2003-02-14 16:50:13 +00:00
|
|
|
* to the existing one but still return the top of the newly allocated
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* chain. NULL is returned on failure, in which case the [optional]
|
|
|
|
* provided chain is left untouched, and any memory already allocated
|
|
|
|
* is freed.
|
|
|
|
*
|
|
|
|
* Arguments:
|
|
|
|
* - m: existing chain to which to append new chain (optional).
|
|
|
|
* - len: total length of data to append, either in mbufs or clusters
|
|
|
|
* (we allocate whatever combination yields the best fit).
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
|
|
|
*/
|
|
|
|
struct mbuf *
|
|
|
|
m_getm(struct mbuf *m, int len, int how, short type)
|
|
|
|
{
|
|
|
|
struct mbuf *mb, *top, *cur, *mtail;
|
2002-07-23 14:55:33 +00:00
|
|
|
int num, rem, cchnum;
|
|
|
|
short persist;
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
int i;
|
|
|
|
|
|
|
|
KASSERT(len >= 0, ("m_getm(): len is < 0"));
|
|
|
|
|
|
|
|
/* If m != NULL, we will append to the end of that chain. */
|
|
|
|
if (m != NULL)
|
|
|
|
for (mtail = m; mtail->m_next != NULL; mtail = mtail->m_next);
|
|
|
|
else
|
|
|
|
mtail = NULL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In the best-case scenario (which should be the common case
|
|
|
|
* unless we're in a starvation situation), we will be able to
|
|
|
|
* go through the allocation of all the desired mbufs and clusters
|
|
|
|
* here without dropping our per-CPU cache lock in between.
|
|
|
|
*/
|
|
|
|
num = len / MCLBYTES;
|
|
|
|
rem = len % MCLBYTES;
|
|
|
|
persist = 0;
|
|
|
|
cchnum = -1;
|
|
|
|
top = cur = NULL;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type,
|
|
|
|
MBP_PERSIST | persist, &cchnum);
|
|
|
|
if (mb == NULL)
|
|
|
|
goto failed;
|
|
|
|
_mb_setup(mb, type);
|
2002-11-27 04:26:00 +00:00
|
|
|
mb->m_len = 0;
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
|
|
|
|
persist = (i != (num - 1) || rem > 0) ? MBP_PERSIST : 0;
|
|
|
|
mb->m_ext.ext_buf = (caddr_t)mb_alloc(&mb_list_clust,
|
|
|
|
how, MT_NOTMBUF, persist | MBP_PERSISTENT, &cchnum);
|
|
|
|
if (mb->m_ext.ext_buf == NULL) {
|
|
|
|
(void)m_free(mb);
|
|
|
|
goto failed;
|
|
|
|
}
|
|
|
|
_mcl_setup(mb);
|
2002-07-30 21:06:27 +00:00
|
|
|
_mext_init_ref(mb, &cl_refcntmap[cl2ref(mb->m_ext.ext_buf)]);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
persist = MBP_PERSISTENT;
|
|
|
|
|
|
|
|
if (cur == NULL)
|
|
|
|
top = cur = mb;
|
|
|
|
else
|
2002-11-27 04:26:00 +00:00
|
|
|
cur = (cur->m_next = mb);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
|
|
|
if (rem > 0) {
|
|
|
|
if (cchnum >= 0) {
|
|
|
|
persist = MBP_PERSISTENT;
|
|
|
|
persist |= (rem > MINCLSIZE) ? MBP_PERSIST : 0;
|
|
|
|
mb = _mgetm_internal(how, type, persist, cchnum);
|
|
|
|
if (mb == NULL)
|
|
|
|
goto failed;
|
|
|
|
} else if (rem > MINCLSIZE) {
|
|
|
|
mb = m_getcl(how, type, 0);
|
|
|
|
} else {
|
|
|
|
mb = m_get(how, type);
|
|
|
|
}
|
|
|
|
if (mb != NULL) {
|
2002-11-27 04:26:00 +00:00
|
|
|
mb->m_len = 0;
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
if (cur == NULL)
|
|
|
|
top = mb;
|
|
|
|
else
|
|
|
|
cur->m_next = mb;
|
|
|
|
} else
|
|
|
|
goto failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mtail != NULL)
|
|
|
|
mtail->m_next = top;
|
2003-02-14 16:50:13 +00:00
|
|
|
return top;
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
failed:
|
|
|
|
if (top != NULL)
|
|
|
|
m_freem(top);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate and return a single M_PKTHDR mbuf. NULL is returned on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
struct mbuf *
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
m_gethdr(int how, short type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mbuf *mb;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type, 0, NULL);
|
2002-07-31 01:42:19 +00:00
|
|
|
if (mb != NULL) {
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
_mbhdr_setup(mb, type);
|
2002-07-31 01:42:19 +00:00
|
|
|
#ifdef MAC
|
Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
|
|
|
if (mac_init_mbuf(mb, MBTOM(how)) != 0) {
|
2002-08-01 14:24:41 +00:00
|
|
|
m_free(mb);
|
Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
|
|
|
return (NULL);
|
2002-07-31 01:42:19 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Allocate and return a single (normal) pre-zero'd mbuf. NULL is
|
|
|
|
* returned on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
struct mbuf *
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
m_get_clrd(int how, short type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mbuf *mb;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type, 0, NULL);
|
|
|
|
if (mb != NULL) {
|
|
|
|
_mb_setup(mb, type);
|
2001-06-22 06:35:32 +00:00
|
|
|
bzero(mtod(mb, caddr_t), MLEN);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Allocate and return a single M_PKTHDR pre-zero'd mbuf. NULL is
|
|
|
|
* returned on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
struct mbuf *
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
m_gethdr_clrd(int how, short type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mbuf *mb;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type, 0, NULL);
|
|
|
|
if (mb != NULL) {
|
|
|
|
_mbhdr_setup(mb, type);
|
2002-07-31 01:42:19 +00:00
|
|
|
#ifdef MAC
|
Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
|
|
|
if (mac_init_mbuf(mb, MBTOM(how)) != 0) {
|
2002-08-01 14:24:41 +00:00
|
|
|
m_free(mb);
|
Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
|
|
|
return (NULL);
|
2002-07-31 01:42:19 +00:00
|
|
|
}
|
|
|
|
#endif
|
2001-06-22 06:35:32 +00:00
|
|
|
bzero(mtod(mb, caddr_t), MHLEN);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
2001-06-22 06:35:32 +00:00
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Free a single mbuf and any associated storage that it may have attached
|
|
|
|
* to it. The associated storage may not be immediately freed if its
|
|
|
|
* reference count is above 1. Returns the next mbuf in the chain following
|
|
|
|
* the mbuf being freed.
|
|
|
|
*
|
|
|
|
* Arguments:
|
|
|
|
* - mb: the mbuf to free.
|
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
struct mbuf *
|
|
|
|
m_free(struct mbuf *mb)
|
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mbuf *nb;
|
2002-07-23 14:55:33 +00:00
|
|
|
int cchnum;
|
|
|
|
short persist = 0;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2003-05-02 03:43:40 +00:00
|
|
|
#ifdef INVARIANTS
|
|
|
|
if (mb->m_flags & M_FREELIST)
|
|
|
|
panic("m_free detected a mbuf double-free");
|
|
|
|
mb->m_flags |= M_FREELIST;
|
|
|
|
#endif
|
2002-10-16 01:54:46 +00:00
|
|
|
if ((mb->m_flags & M_PKTHDR) != 0)
|
|
|
|
m_tag_delete_chain(mb, NULL);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
nb = mb->m_next;
|
2002-07-23 14:55:33 +00:00
|
|
|
if ((mb->m_flags & M_EXT) != 0) {
|
|
|
|
MEXT_REM_REF(mb);
|
|
|
|
if (atomic_cmpset_int(mb->m_ext.ref_cnt, 0, 1)) {
|
|
|
|
if (mb->m_ext.ext_type == EXT_CLUSTER) {
|
|
|
|
mb_free(&mb_list_clust,
|
|
|
|
(caddr_t)mb->m_ext.ext_buf, MT_NOTMBUF,
|
|
|
|
MBP_PERSIST, &cchnum);
|
|
|
|
persist = MBP_PERSISTENT;
|
|
|
|
} else {
|
|
|
|
(*(mb->m_ext.ext_free))(mb->m_ext.ext_buf,
|
|
|
|
mb->m_ext.ext_args);
|
2002-07-30 21:06:27 +00:00
|
|
|
_mext_dealloc_ref(mb);
|
2002-07-23 14:55:33 +00:00
|
|
|
persist = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mb_free(&mb_list_mbuf, mb, mb->m_type, persist, &cchnum);
|
2001-06-22 06:35:32 +00:00
|
|
|
return (nb);
|
|
|
|
}
|
|
|
|
|
2002-07-24 15:11:23 +00:00
|
|
|
/*
|
|
|
|
* Free an entire chain of mbufs and associated external buffers, if
|
|
|
|
* applicable. Right now, we only optimize a little so that the cache
|
|
|
|
* lock may be held across a single mbuf+cluster free. Hopefully,
|
|
|
|
* we'll eventually be holding the lock across more than merely two
|
|
|
|
* consecutive frees but right now this is hard to implement because of
|
|
|
|
* things like _mext_dealloc_ref (may do a free()) and atomic ops in the
|
2002-10-16 01:54:46 +00:00
|
|
|
* loop.
|
2002-07-24 15:11:23 +00:00
|
|
|
*
|
|
|
|
* - mb: the mbuf chain to free.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
m_freem(struct mbuf *mb)
|
|
|
|
{
|
|
|
|
|
2003-05-10 18:08:23 +00:00
|
|
|
while (mb != NULL)
|
|
|
|
mb = m_free(mb);
|
2002-07-24 15:11:23 +00:00
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Fetch an mbuf with a cluster attached to it. If one of the
|
|
|
|
* allocations fails, the entire allocation fails. This routine is
|
|
|
|
* the preferred way of fetching both the mbuf and cluster together,
|
|
|
|
* as it avoids having to unlock/relock between allocations. Returns
|
|
|
|
* NULL on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* - type: the type of the mbuf being allocated.
|
|
|
|
* - flags: any flags to pass to the mbuf being allocated; if this includes
|
|
|
|
* the M_PKTHDR bit, then the mbuf is configured as a M_PKTHDR mbuf.
|
|
|
|
*/
|
|
|
|
struct mbuf *
|
|
|
|
m_getcl(int how, short type, int flags)
|
|
|
|
{
|
|
|
|
struct mbuf *mb;
|
|
|
|
int cchnum;
|
|
|
|
|
|
|
|
mb = (struct mbuf *)mb_alloc(&mb_list_mbuf, how, type,
|
|
|
|
MBP_PERSIST, &cchnum);
|
|
|
|
if (mb == NULL)
|
|
|
|
return NULL;
|
|
|
|
mb->m_type = type;
|
|
|
|
mb->m_next = NULL;
|
|
|
|
mb->m_flags = flags;
|
|
|
|
if ((flags & M_PKTHDR) != 0) {
|
|
|
|
mb->m_nextpkt = NULL;
|
|
|
|
mb->m_pkthdr.rcvif = NULL;
|
|
|
|
mb->m_pkthdr.csum_flags = 0;
|
2002-10-16 01:54:46 +00:00
|
|
|
SLIST_INIT(&mb->m_pkthdr.tags);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
mb->m_ext.ext_buf = (caddr_t)mb_alloc(&mb_list_clust, how,
|
|
|
|
MT_NOTMBUF, MBP_PERSISTENT, &cchnum);
|
|
|
|
if (mb->m_ext.ext_buf == NULL) {
|
|
|
|
(void)m_free(mb);
|
|
|
|
mb = NULL;
|
|
|
|
} else {
|
2002-07-30 21:06:27 +00:00
|
|
|
_mcl_setup(mb);
|
|
|
|
_mext_init_ref(mb, &cl_refcntmap[cl2ref(mb->m_ext.ext_buf)]);
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
}
|
2002-08-01 14:24:41 +00:00
|
|
|
#ifdef MAC
|
Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
|
|
|
if (flags & M_PKTHDR) {
|
|
|
|
if (mac_init_mbuf(mb, MBTOM(how)) != 0) {
|
|
|
|
m_free(mb);
|
|
|
|
return (NULL);
|
|
|
|
}
|
2002-08-01 14:24:41 +00:00
|
|
|
}
|
|
|
|
#endif
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
return (mb);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fetch a single mbuf cluster and attach it to an existing mbuf. If
|
|
|
|
* successfull, configures the provided mbuf to have mbuf->m_ext.ext_buf
|
|
|
|
* pointing to the cluster, and sets the M_EXT bit in the mbuf's flags.
|
|
|
|
* The M_EXT bit is not set on failure.
|
|
|
|
*
|
|
|
|
* Arguments:
|
|
|
|
* - mb: the existing mbuf to which to attach the allocated cluster.
|
2003-02-19 05:47:46 +00:00
|
|
|
* - how: M_TRYWAIT to try to block for kern.ipc.mbuf_wait number of ticks
|
|
|
|
* if really starved for memory. M_DONTWAIT to never block.
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
void
|
|
|
|
m_clget(struct mbuf *mb, int how)
|
|
|
|
{
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
mb->m_ext.ext_buf= (caddr_t)mb_alloc(&mb_list_clust,how,MT_NOTMBUF,
|
|
|
|
0, NULL);
|
2001-06-22 06:35:32 +00:00
|
|
|
if (mb->m_ext.ext_buf != NULL) {
|
2002-07-30 21:06:27 +00:00
|
|
|
_mcl_setup(mb);
|
|
|
|
_mext_init_ref(mb, &cl_refcntmap[cl2ref(mb->m_ext.ext_buf)]);
|
2001-06-22 06:35:32 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
/*
|
|
|
|
* Configure a provided mbuf to refer to the provided external storage
|
|
|
|
* buffer and setup a reference count for said buffer. If the setting
|
|
|
|
* up of the reference count fails, the M_EXT bit will not be set. If
|
|
|
|
* successfull, the M_EXT bit is set in the mbuf's flags.
|
|
|
|
*
|
|
|
|
* Arguments:
|
|
|
|
* - mb: the existing mbuf to which to attach the provided buffer.
|
|
|
|
* - buf: the address of the provided external storage buffer.
|
|
|
|
* - size: the size of the provided buffer.
|
|
|
|
* - freef: a pointer to a routine that is responsible for freeing the
|
|
|
|
* provided external storage buffer.
|
|
|
|
* - args: a pointer to an argument structure (of any type) to be passed
|
|
|
|
* to the provided freef routine (may be NULL).
|
|
|
|
* - flags: any other flags to be passed to the provided mbuf.
|
|
|
|
* - type: the type that the external storage buffer should be labeled with.
|
|
|
|
*/
|
2001-06-22 06:35:32 +00:00
|
|
|
void
|
|
|
|
m_extadd(struct mbuf *mb, caddr_t buf, u_int size,
|
2002-08-15 14:09:16 +00:00
|
|
|
void (*freef)(void *, void *), void *args, int flags, int type)
|
2001-06-22 06:35:32 +00:00
|
|
|
{
|
2003-01-02 21:16:50 +00:00
|
|
|
u_int *ref_cnt = NULL;
|
2001-06-22 06:35:32 +00:00
|
|
|
|
2003-01-02 21:16:50 +00:00
|
|
|
if (type == EXT_CLUSTER)
|
|
|
|
ref_cnt = &cl_refcntmap[cl2ref(mb->m_ext.ext_buf)];
|
|
|
|
else if (type == EXT_EXTREF)
|
|
|
|
ref_cnt = mb->m_ext.ref_cnt;
|
|
|
|
_mext_init_ref(mb, ref_cnt);
|
2001-06-22 06:35:32 +00:00
|
|
|
if (mb->m_ext.ref_cnt != NULL) {
|
|
|
|
mb->m_flags |= (M_EXT | flags);
|
|
|
|
mb->m_ext.ext_buf = buf;
|
|
|
|
mb->m_data = mb->m_ext.ext_buf;
|
|
|
|
mb->m_ext.ext_size = size;
|
|
|
|
mb->m_ext.ext_free = freef;
|
|
|
|
mb->m_ext.ext_args = args;
|
|
|
|
mb->m_ext.ext_type = type;
|
|
|
|
}
|
|
|
|
}
|
2001-09-30 01:58:39 +00:00
|
|
|
|
|
|
|
/*
|
o Introduce new m_getcl() interface routine that allocates an mbuf
and a cluster in one shot.
o Introduce MBP_PERSIST and MBP_PERSISTENT control bits to mb_alloc();
MBP_PERSIST means "if you can allocate, then keep the cache lock
held on exit," and MBP_PERSISTENT means "a cache lock is alredy held
on entry, so allocate from the specified (already locked) cache."
They may be used in combination.
o m_getcl() uses the MBP_PERSIST/MBP_PERSISTENT interface so that it
doesn't drop the cache lock in between the mbuf and cluster allocations.
o m_getm(), which takes a size and allocates an mbuf + cluster "best fit"
chain, has been moved from uipc_mbuf.c to subr_mbuf.c and shown how to
use MBP_PERSIST/MBP_PERSISTENT to attempt to do a grouped allocation
without dropping the cache lock in between.
Why this is good: much less bus-locked lock acquires/drops when they're
not needed. Also, prototype for m_getcl():
struct mbuf * m_getcl(int how, short type, int flags);
"how" and "type" are self-explanatory. "flags" may be M_PKTHDR, in
which case m_getcl() will make the mbuf a pkthdr-mbuf.
While I'm in subr_mbuf.c:
o Every exported routine now has a nice comment with a description of
the expected arguments. Eventually, mbuf(9) needs to be re-vamped
but there's still more code to write/finalize before I get to that.
o internal macros have been changed a bit.
o consistently use 'short' for "type." This somehow slipped through
before (that 'type' was sometimes declared as int).
Alfred has been pushing for the MBP_PERSIST{,ENT} thing for almost a
year now. Luigi asked for m_getcl(), and will probably MFC that
part of this commit.
TODO [Related]: teach mb_free() about MBP_PERSIST{, ENT}.
2002-07-15 15:32:59 +00:00
|
|
|
* Change type of provided mbuf. This is a relatively expensive operation
|
|
|
|
* (due to the cost of statistics manipulations) and should be avoided, where
|
|
|
|
* possible.
|
|
|
|
*
|
|
|
|
* Arguments:
|
|
|
|
* - mb: the provided mbuf for which the type needs to be changed.
|
|
|
|
* - new_type: the new type to change the mbuf to.
|
2001-09-30 01:58:39 +00:00
|
|
|
*/
|
|
|
|
void
|
|
|
|
m_chtype(struct mbuf *mb, short new_type)
|
|
|
|
{
|
2001-12-23 22:04:08 +00:00
|
|
|
struct mb_gen_list *gen_list;
|
2001-09-30 01:58:39 +00:00
|
|
|
|
|
|
|
gen_list = MB_GET_GEN_LIST(&mb_list_mbuf);
|
|
|
|
MB_LOCK_CONT(gen_list);
|
|
|
|
MB_MBTYPES_DEC(gen_list, mb->m_type, 1);
|
|
|
|
MB_MBTYPES_INC(gen_list, new_type, 1);
|
|
|
|
MB_UNLOCK_CONT(gen_list);
|
|
|
|
mb->m_type = new_type;
|
|
|
|
}
|