1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-21 11:13:30 +00:00
freebsd/sbin/restore/dirs.c

735 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (c) 1983, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
#if 0
static char sccsid[] = "@(#)dirs.c 8.7 (Berkeley) 5/1/95";
#endif
static const char rcsid[] =
1999-08-28 00:22:10 +00:00
"$FreeBSD$";
#endif /* not lint */
#include <sys/param.h>
#include <sys/file.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <protocols/dumprestore.h>
#include <err.h>
#include <errno.h>
#include <limits.h>
#include <paths.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "restore.h"
#include "extern.h"
/*
* Symbol table of directories read from tape.
*/
#define HASHSIZE 1000
#define INOHASH(val) (val % HASHSIZE)
struct inotab {
struct inotab *t_next;
ino_t t_ino;
int32_t t_seekpt;
int32_t t_size;
};
static struct inotab *inotab[HASHSIZE];
/*
* Information retained about directories.
*/
struct modeinfo {
ino_t ino;
struct timeval ctimep[2];
struct timeval mtimep[2];
mode_t mode;
uid_t uid;
gid_t gid;
int flags;
};
/*
* Definitions for library routines operating on directories.
*/
#undef DIRBLKSIZ
#define DIRBLKSIZ 1024
struct rstdirdesc {
int dd_fd;
int32_t dd_loc;
int32_t dd_size;
char dd_buf[DIRBLKSIZ];
};
/*
* Global variables for this file.
*/
static long seekpt;
static FILE *df, *mf;
static RST_DIR *dirp;
static char dirfile[MAXPATHLEN] = "#"; /* No file */
static char modefile[MAXPATHLEN] = "#"; /* No file */
static char dot[2] = "."; /* So it can be modified */
/*
* Format of old style directories.
*/
#define ODIRSIZ 14
struct odirect {
u_short d_ino;
char d_name[ODIRSIZ];
};
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static struct inotab *allocinotab(struct context *, long);
static void dcvt(struct odirect *, struct direct *);
static void flushent(void);
static struct inotab *inotablookup(ino_t);
static RST_DIR *opendirfile(const char *);
static void putdir(char *, long);
static void putent(struct direct *);
static void rst_seekdir(RST_DIR *, long, long);
static long rst_telldir(RST_DIR *);
static struct direct *searchdir(ino_t, char *);
/*
* Extract directory contents, building up a directory structure
* on disk for extraction by name.
* If genmode is requested, save mode, owner, and times for all
* directories on the tape.
*/
void
extractdirs(int genmode)
{
struct inotab *itp;
struct direct nulldir;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, fd;
const char *tmpdir;
vprintf(stdout, "Extract directories from tape\n");
if ((tmpdir = getenv("TMPDIR")) == NULL || tmpdir[0] == '\0')
tmpdir = _PATH_TMP;
(void) sprintf(dirfile, "%s/rstdir%d", tmpdir, dumpdate);
if (command != 'r' && command != 'R') {
(void *) strcat(dirfile, "-XXXXXX");
fd = mkstemp(dirfile);
} else
fd = open(dirfile, O_RDWR|O_CREAT|O_EXCL, 0666);
if (fd == -1 || (df = fdopen(fd, "w")) == NULL) {
if (fd != -1)
close(fd);
1997-06-18 06:28:46 +00:00
warn("%s - cannot create directory temporary\nfopen", dirfile);
done(1);
}
if (genmode != 0) {
(void) sprintf(modefile, "%s/rstmode%d", tmpdir, dumpdate);
if (command != 'r' && command != 'R') {
(void *) strcat(modefile, "-XXXXXX");
fd = mkstemp(modefile);
} else
fd = open(modefile, O_RDWR|O_CREAT|O_EXCL, 0666);
if (fd == -1 || (mf = fdopen(fd, "w")) == NULL) {
if (fd != -1)
close(fd);
1997-06-18 06:28:46 +00:00
warn("%s - cannot create modefile\nfopen", modefile);
done(1);
}
}
nulldir.d_ino = 0;
nulldir.d_type = DT_DIR;
nulldir.d_namlen = 1;
(void) strcpy(nulldir.d_name, "/");
nulldir.d_reclen = DIRSIZ(0, &nulldir);
for (;;) {
curfile.name = "<directory file - name unknown>";
curfile.action = USING;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (curfile.mode == 0 || (curfile.mode & IFMT) != IFDIR) {
(void) fclose(df);
dirp = opendirfile(dirfile);
if (dirp == NULL)
fprintf(stderr, "opendirfile: %s\n",
strerror(errno));
if (mf != NULL)
(void) fclose(mf);
i = dirlookup(dot);
if (i == 0)
panic("Root directory is not on tape\n");
return;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
itp = allocinotab(&curfile, seekpt);
getfile(putdir, xtrnull);
putent(&nulldir);
flushent();
itp->t_size = seekpt - itp->t_seekpt;
}
}
/*
* skip over all the directories on the tape
*/
void
skipdirs(void)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
while (curfile.ino && (curfile.mode & IFMT) == IFDIR) {
skipfile();
}
}
/*
1995-05-30 06:12:45 +00:00
* Recursively find names and inumbers of all files in subtree
* pname and pass them off to be processed.
*/
void
treescan(char *pname, ino_t ino, long (*todo)(char *, ino_t, int))
{
struct inotab *itp;
struct direct *dp;
int namelen;
long bpt;
char locname[MAXPATHLEN + 1];
itp = inotablookup(ino);
if (itp == NULL) {
/*
* Pname is name of a simple file or an unchanged directory.
*/
(void) (*todo)(pname, ino, LEAF);
return;
}
/*
* Pname is a dumped directory name.
*/
if ((*todo)(pname, ino, NODE) == FAIL)
return;
/*
* begin search through the directory
* skipping over "." and ".."
*/
(void) strncpy(locname, pname, sizeof(locname) - 1);
locname[sizeof(locname) - 1] = '\0';
(void) strncat(locname, "/", sizeof(locname) - strlen(locname));
namelen = strlen(locname);
rst_seekdir(dirp, itp->t_seekpt, itp->t_seekpt);
dp = rst_readdir(dirp); /* "." */
if (dp != NULL && strcmp(dp->d_name, ".") == 0)
dp = rst_readdir(dirp); /* ".." */
else
fprintf(stderr, "Warning: `.' missing from directory %s\n",
pname);
if (dp != NULL && strcmp(dp->d_name, "..") == 0)
dp = rst_readdir(dirp); /* first real entry */
else
fprintf(stderr, "Warning: `..' missing from directory %s\n",
pname);
bpt = rst_telldir(dirp);
/*
* a zero inode signals end of directory
*/
while (dp != NULL) {
locname[namelen] = '\0';
if (namelen + dp->d_namlen >= sizeof(locname)) {
fprintf(stderr, "%s%s: name exceeds %d char\n",
locname, dp->d_name, sizeof(locname) - 1);
} else {
(void) strncat(locname, dp->d_name, (int)dp->d_namlen);
treescan(locname, dp->d_ino, todo);
rst_seekdir(dirp, bpt, itp->t_seekpt);
}
dp = rst_readdir(dirp);
bpt = rst_telldir(dirp);
}
}
/*
* Lookup a pathname which is always assumed to start from the ROOTINO.
*/
struct direct *
pathsearch(const char *pathname)
{
ino_t ino;
struct direct *dp;
char *path, *name, buffer[MAXPATHLEN];
strcpy(buffer, pathname);
path = buffer;
ino = ROOTINO;
while (*path == '/')
path++;
dp = NULL;
while ((name = strsep(&path, "/")) != NULL && *name != '\0') {
if ((dp = searchdir(ino, name)) == NULL)
return (NULL);
ino = dp->d_ino;
}
return (dp);
}
/*
* Lookup the requested name in directory inum.
* Return its inode number if found, zero if it does not exist.
*/
static struct direct *
searchdir(ino_t inum, char *name)
{
struct direct *dp;
struct inotab *itp;
int len;
itp = inotablookup(inum);
if (itp == NULL)
return (NULL);
rst_seekdir(dirp, itp->t_seekpt, itp->t_seekpt);
len = strlen(name);
do {
dp = rst_readdir(dirp);
if (dp == NULL)
return (NULL);
} while (dp->d_namlen != len || strncmp(dp->d_name, name, len) != 0);
return (dp);
}
/*
* Put the directory entries in the directory file
*/
static void
putdir(char *buf, long size)
{
struct direct cvtbuf;
struct odirect *odp;
struct odirect *eodp;
struct direct *dp;
long loc, i;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
for (loc = 0; loc < size; ) {
dp = (struct direct *)(buf + loc);
if (Bcvt)
swabst((u_char *)"ls", (u_char *) dp);
i = DIRBLKSIZ - (loc & (DIRBLKSIZ - 1));
if ((dp->d_reclen & 0x3) != 0 ||
dp->d_reclen > i ||
dp->d_reclen < DIRSIZ(0, dp) ||
dp->d_namlen > NAME_MAX) {
vprintf(stdout, "Mangled directory: ");
if ((dp->d_reclen & 0x3) != 0)
vprintf(stdout,
"reclen not multiple of 4 ");
if (dp->d_reclen < DIRSIZ(0, dp))
vprintf(stdout,
"reclen less than DIRSIZ (%d < %d) ",
dp->d_reclen, DIRSIZ(0, dp));
if (dp->d_namlen > NAME_MAX)
vprintf(stdout,
"reclen name too big (%d > %d) ",
dp->d_namlen, NAME_MAX);
vprintf(stdout, "\n");
loc += i;
continue;
}
loc += dp->d_reclen;
if (dp->d_ino != 0) {
putent(dp);
}
}
}
/*
* These variables are "local" to the following two functions.
*/
char dirbuf[DIRBLKSIZ];
long dirloc = 0;
long prev = 0;
/*
* add a new directory entry to a file.
*/
static void
putent(struct direct *dp)
{
dp->d_reclen = DIRSIZ(0, dp);
if (dirloc + dp->d_reclen > DIRBLKSIZ) {
((struct direct *)(dirbuf + prev))->d_reclen =
DIRBLKSIZ - prev;
(void) fwrite(dirbuf, 1, DIRBLKSIZ, df);
dirloc = 0;
}
memmove(dirbuf + dirloc, dp, (long)dp->d_reclen);
prev = dirloc;
dirloc += dp->d_reclen;
}
/*
* flush out a directory that is finished.
*/
static void
flushent(void)
{
((struct direct *)(dirbuf + prev))->d_reclen = DIRBLKSIZ - prev;
(void) fwrite(dirbuf, (int)dirloc, 1, df);
seekpt = ftell(df);
dirloc = 0;
}
static void
dcvt(struct odirect *odp, struct direct *ndp)
{
memset(ndp, 0, (long)(sizeof *ndp));
ndp->d_ino = odp->d_ino;
ndp->d_type = DT_UNKNOWN;
(void) strncpy(ndp->d_name, odp->d_name, ODIRSIZ);
ndp->d_namlen = strlen(ndp->d_name);
ndp->d_reclen = DIRSIZ(0, ndp);
}
/*
* Seek to an entry in a directory.
* Only values returned by rst_telldir should be passed to rst_seekdir.
* This routine handles many directories in a single file.
* It takes the base of the directory in the file, plus
* the desired seek offset into it.
*/
static void
rst_seekdir(RST_DIR *dirp, long loc, long base)
{
if (loc == rst_telldir(dirp))
return;
loc -= base;
if (loc < 0)
fprintf(stderr, "bad seek pointer to rst_seekdir %ld\n", loc);
(void) lseek(dirp->dd_fd, base + (loc & ~(DIRBLKSIZ - 1)), SEEK_SET);
dirp->dd_loc = loc & (DIRBLKSIZ - 1);
if (dirp->dd_loc != 0)
dirp->dd_size = read(dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ);
}
/*
* get next entry in a directory.
*/
struct direct *
rst_readdir(RST_DIR *dirp)
{
struct direct *dp;
for (;;) {
if (dirp->dd_loc == 0) {
1995-05-30 06:12:45 +00:00
dirp->dd_size = read(dirp->dd_fd, dirp->dd_buf,
DIRBLKSIZ);
if (dirp->dd_size <= 0) {
dprintf(stderr, "error reading directory\n");
return (NULL);
}
}
if (dirp->dd_loc >= dirp->dd_size) {
dirp->dd_loc = 0;
continue;
}
dp = (struct direct *)(dirp->dd_buf + dirp->dd_loc);
if (dp->d_reclen == 0 ||
dp->d_reclen > DIRBLKSIZ + 1 - dirp->dd_loc) {
dprintf(stderr, "corrupted directory: bad reclen %d\n",
dp->d_reclen);
return (NULL);
}
dirp->dd_loc += dp->d_reclen;
if (dp->d_ino == 0 && strcmp(dp->d_name, "/") == 0)
return (NULL);
if (dp->d_ino >= maxino) {
dprintf(stderr, "corrupted directory: bad inum %d\n",
dp->d_ino);
continue;
}
return (dp);
}
}
/*
* Simulate the opening of a directory
*/
RST_DIR *
rst_opendir(const char *name)
{
struct inotab *itp;
RST_DIR *dirp;
ino_t ino;
if ((ino = dirlookup(name)) > 0 &&
(itp = inotablookup(ino)) != NULL) {
dirp = opendirfile(dirfile);
rst_seekdir(dirp, itp->t_seekpt, itp->t_seekpt);
return (dirp);
}
return (NULL);
}
/*
* In our case, there is nothing to do when closing a directory.
*/
void
rst_closedir(RST_DIR *dirp)
{
(void)close(dirp->dd_fd);
free(dirp);
return;
}
/*
* Simulate finding the current offset in the directory.
*/
static long
rst_telldir(RST_DIR *dirp)
{
return ((long)lseek(dirp->dd_fd,
(off_t)0, SEEK_CUR) - dirp->dd_size + dirp->dd_loc);
}
/*
* Open a directory file.
*/
static RST_DIR *
opendirfile(const char *name)
{
RST_DIR *dirp;
int fd;
if ((fd = open(name, O_RDONLY)) == -1)
return (NULL);
if ((dirp = malloc(sizeof(RST_DIR))) == NULL) {
(void)close(fd);
return (NULL);
}
dirp->dd_fd = fd;
dirp->dd_loc = 0;
return (dirp);
}
/*
* Set the mode, owner, and times for all new or changed directories
*/
void
setdirmodes(int flags)
{
FILE *mf;
struct modeinfo node;
struct entry *ep;
char *cp;
const char *tmpdir;
1995-05-30 06:12:45 +00:00
vprintf(stdout, "Set directory mode, owner, and times.\n");
if ((tmpdir = getenv("TMPDIR")) == NULL || tmpdir[0] == '\0')
tmpdir = _PATH_TMP;
if (command == 'r' || command == 'R')
(void) sprintf(modefile, "%s/rstmode%d", tmpdir, dumpdate);
if (modefile[0] == '#') {
panic("modefile not defined\n");
fprintf(stderr, "directory mode, owner, and times not set\n");
return;
}
mf = fopen(modefile, "r");
if (mf == NULL) {
fprintf(stderr, "fopen: %s\n", strerror(errno));
fprintf(stderr, "cannot open mode file %s\n", modefile);
fprintf(stderr, "directory mode, owner, and times not set\n");
return;
}
clearerr(mf);
for (;;) {
(void) fread((char *)&node, 1, sizeof(struct modeinfo), mf);
if (feof(mf))
break;
ep = lookupino(node.ino);
if (command == 'i' || command == 'x') {
if (ep == NULL)
continue;
if ((flags & FORCE) == 0 && ep->e_flags & EXISTED) {
ep->e_flags &= ~NEW;
continue;
}
if (node.ino == ROOTINO &&
reply("set owner/mode for '.'") == FAIL)
continue;
}
if (ep == NULL) {
panic("cannot find directory inode %d\n", node.ino);
} else {
cp = myname(ep);
if (!Nflag) {
(void) chown(cp, node.uid, node.gid);
(void) chmod(cp, node.mode);
utimes(cp, node.ctimep);
utimes(cp, node.mtimep);
(void) chflags(cp, node.flags);
}
ep->e_flags &= ~NEW;
}
}
if (ferror(mf))
panic("error setting directory modes\n");
(void) fclose(mf);
}
/*
* Generate a literal copy of a directory.
*/
int
genliteraldir(char *name, ino_t ino)
{
struct inotab *itp;
int ofile, dp, i, size;
char buf[BUFSIZ];
itp = inotablookup(ino);
if (itp == NULL)
panic("Cannot find directory inode %d named %s\n", ino, name);
if ((ofile = open(name, O_WRONLY | O_CREAT | O_TRUNC, 0666)) < 0) {
fprintf(stderr, "%s: ", name);
(void) fflush(stderr);
fprintf(stderr, "cannot create file: %s\n", strerror(errno));
return (FAIL);
}
rst_seekdir(dirp, itp->t_seekpt, itp->t_seekpt);
dp = dup(dirp->dd_fd);
for (i = itp->t_size; i > 0; i -= BUFSIZ) {
size = i < BUFSIZ ? i : BUFSIZ;
if (read(dp, buf, (int) size) == -1) {
fprintf(stderr,
"write error extracting inode %d, name %s\n",
curfile.ino, curfile.name);
fprintf(stderr, "read: %s\n", strerror(errno));
done(1);
}
if (!Nflag && write(ofile, buf, (int) size) == -1) {
fprintf(stderr,
"write error extracting inode %d, name %s\n",
curfile.ino, curfile.name);
fprintf(stderr, "write: %s\n", strerror(errno));
done(1);
}
}
(void) close(dp);
(void) close(ofile);
return (GOOD);
}
/*
* Determine the type of an inode
*/
int
inodetype(ino_t ino)
{
struct inotab *itp;
itp = inotablookup(ino);
if (itp == NULL)
return (LEAF);
return (NODE);
}
/*
* Allocate and initialize a directory inode entry.
* If requested, save its pertinent mode, owner, and time info.
*/
static struct inotab *
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
allocinotab(struct context *ctxp, long seekpt)
{
struct inotab *itp;
struct modeinfo node;
itp = calloc(1, sizeof(struct inotab));
if (itp == NULL)
panic("no memory directory table\n");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
itp->t_next = inotab[INOHASH(ctxp->ino)];
inotab[INOHASH(ctxp->ino)] = itp;
itp->t_ino = ctxp->ino;
itp->t_seekpt = seekpt;
if (mf == NULL)
return (itp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
node.ino = ctxp->ino;
node.mtimep[0].tv_sec = ctxp->atime_sec;
node.mtimep[0].tv_usec = ctxp->atime_nsec / 1000;
node.mtimep[1].tv_sec = ctxp->mtime_sec;
node.mtimep[1].tv_usec = ctxp->mtime_nsec / 1000;
node.ctimep[0].tv_sec = ctxp->atime_sec;
node.ctimep[0].tv_usec = ctxp->atime_nsec / 1000;
node.ctimep[1].tv_sec = ctxp->birthtime_sec;
node.ctimep[1].tv_usec = ctxp->birthtime_nsec / 1000;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
node.mode = ctxp->mode;
node.flags = ctxp->file_flags;
node.uid = ctxp->uid;
node.gid = ctxp->gid;
(void) fwrite((char *)&node, 1, sizeof(struct modeinfo), mf);
return (itp);
}
/*
* Look up an inode in the table of directories
*/
static struct inotab *
inotablookup(ino_t ino)
{
struct inotab *itp;
for (itp = inotab[INOHASH(ino)]; itp != NULL; itp = itp->t_next)
if (itp->t_ino == ino)
return (itp);
return (NULL);
}
/*
* Clean up and exit
*/
void
done(int exitcode)
{
closemt();
if (modefile[0] != '#')
(void) unlink(modefile);
if (dirfile[0] != '#')
(void) unlink(dirfile);
exit(exitcode);
}