1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-05 09:14:03 +00:00
freebsd/sys/kern/subr_bus.c

4672 lines
113 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997,1998,2003 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/filio.h>
#include <sys/lock.h>
#include <sys/kernel.h>
#include <sys/kobj.h>
#include <sys/limits.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/poll.h>
#include <sys/proc.h>
#include <sys/condvar.h>
#include <sys/queue.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/selinfo.h>
#include <sys/signalvar.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/uio.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <machine/stdarg.h>
#include <vm/uma.h>
SYSCTL_NODE(_hw, OID_AUTO, bus, CTLFLAG_RW, NULL, NULL);
SYSCTL_NODE(, OID_AUTO, dev, CTLFLAG_RW, NULL, NULL);
/*
* Used to attach drivers to devclasses.
*/
typedef struct driverlink *driverlink_t;
struct driverlink {
kobj_class_t driver;
TAILQ_ENTRY(driverlink) link; /* list of drivers in devclass */
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
int pass;
TAILQ_ENTRY(driverlink) passlink;
};
/*
* Forward declarations
*/
typedef TAILQ_HEAD(devclass_list, devclass) devclass_list_t;
typedef TAILQ_HEAD(driver_list, driverlink) driver_list_t;
typedef TAILQ_HEAD(device_list, device) device_list_t;
struct devclass {
TAILQ_ENTRY(devclass) link;
devclass_t parent; /* parent in devclass hierarchy */
driver_list_t drivers; /* bus devclasses store drivers for bus */
char *name;
device_t *devices; /* array of devices indexed by unit */
int maxunit; /* size of devices array */
int flags;
#define DC_HAS_CHILDREN 1
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
};
/**
* @brief Implementation of device.
*/
struct device {
/*
* A device is a kernel object. The first field must be the
* current ops table for the object.
*/
KOBJ_FIELDS;
/*
* Device hierarchy.
*/
TAILQ_ENTRY(device) link; /**< list of devices in parent */
TAILQ_ENTRY(device) devlink; /**< global device list membership */
device_t parent; /**< parent of this device */
device_list_t children; /**< list of child devices */
/*
* Details of this device.
*/
driver_t *driver; /**< current driver */
devclass_t devclass; /**< current device class */
int unit; /**< current unit number */
char* nameunit; /**< name+unit e.g. foodev0 */
char* desc; /**< driver specific description */
int busy; /**< count of calls to device_busy() */
device_state_t state; /**< current device state */
uint32_t devflags; /**< api level flags for device_get_flags() */
u_int flags; /**< internal device flags */
#define DF_ENABLED 0x01 /* device should be probed/attached */
#define DF_FIXEDCLASS 0x02 /* devclass specified at create time */
#define DF_WILDCARD 0x04 /* unit was originally wildcard */
#define DF_DESCMALLOCED 0x08 /* description was malloced */
#define DF_QUIET 0x10 /* don't print verbose attach message */
#define DF_DONENOMATCH 0x20 /* don't execute DEVICE_NOMATCH again */
#define DF_EXTERNALSOFTC 0x40 /* softc not allocated by us */
#define DF_REBID 0x80 /* Can rebid after attach */
u_int order; /**< order from device_add_child_ordered() */
void *ivars; /**< instance variables */
void *softc; /**< current driver's variables */
struct sysctl_ctx_list sysctl_ctx; /**< state for sysctl variables */
struct sysctl_oid *sysctl_tree; /**< state for sysctl variables */
};
2000-12-08 20:09:00 +00:00
static MALLOC_DEFINE(M_BUS, "bus", "Bus data structures");
static MALLOC_DEFINE(M_BUS_SC, "bus-sc", "Bus data structures, softc");
#ifdef BUS_DEBUG
static int bus_debug = 1;
TUNABLE_INT("bus.debug", &bus_debug);
SYSCTL_INT(_debug, OID_AUTO, bus_debug, CTLFLAG_RW, &bus_debug, 0,
"Debug bus code");
#define PDEBUG(a) if (bus_debug) {printf("%s:%d: ", __func__, __LINE__), printf a; printf("\n");}
#define DEVICENAME(d) ((d)? device_get_name(d): "no device")
#define DRIVERNAME(d) ((d)? d->name : "no driver")
#define DEVCLANAME(d) ((d)? d->name : "no devclass")
/**
* Produce the indenting, indent*2 spaces plus a '.' ahead of that to
* prevent syslog from deleting initial spaces
*/
#define indentprintf(p) do { int iJ; printf("."); for (iJ=0; iJ<indent; iJ++) printf(" "); printf p ; } while (0)
static void print_device_short(device_t dev, int indent);
static void print_device(device_t dev, int indent);
void print_device_tree_short(device_t dev, int indent);
void print_device_tree(device_t dev, int indent);
static void print_driver_short(driver_t *driver, int indent);
static void print_driver(driver_t *driver, int indent);
static void print_driver_list(driver_list_t drivers, int indent);
static void print_devclass_short(devclass_t dc, int indent);
static void print_devclass(devclass_t dc, int indent);
void print_devclass_list_short(void);
void print_devclass_list(void);
#else
/* Make the compiler ignore the function calls */
#define PDEBUG(a) /* nop */
#define DEVICENAME(d) /* nop */
#define DRIVERNAME(d) /* nop */
#define DEVCLANAME(d) /* nop */
#define print_device_short(d,i) /* nop */
#define print_device(d,i) /* nop */
#define print_device_tree_short(d,i) /* nop */
#define print_device_tree(d,i) /* nop */
#define print_driver_short(d,i) /* nop */
#define print_driver(d,i) /* nop */
#define print_driver_list(d,i) /* nop */
#define print_devclass_short(d,i) /* nop */
#define print_devclass(d,i) /* nop */
#define print_devclass_list_short() /* nop */
#define print_devclass_list() /* nop */
#endif
/*
* dev sysctl tree
*/
enum {
DEVCLASS_SYSCTL_PARENT,
};
static int
devclass_sysctl_handler(SYSCTL_HANDLER_ARGS)
{
devclass_t dc = (devclass_t)arg1;
const char *value;
switch (arg2) {
case DEVCLASS_SYSCTL_PARENT:
value = dc->parent ? dc->parent->name : "";
break;
default:
return (EINVAL);
}
return (SYSCTL_OUT(req, value, strlen(value)));
}
static void
devclass_sysctl_init(devclass_t dc)
{
if (dc->sysctl_tree != NULL)
return;
sysctl_ctx_init(&dc->sysctl_ctx);
dc->sysctl_tree = SYSCTL_ADD_NODE(&dc->sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_dev), OID_AUTO, dc->name,
CTLFLAG_RD, NULL, "");
SYSCTL_ADD_PROC(&dc->sysctl_ctx, SYSCTL_CHILDREN(dc->sysctl_tree),
OID_AUTO, "%parent", CTLFLAG_RD,
dc, DEVCLASS_SYSCTL_PARENT, devclass_sysctl_handler, "A",
"parent class");
}
enum {
DEVICE_SYSCTL_DESC,
DEVICE_SYSCTL_DRIVER,
DEVICE_SYSCTL_LOCATION,
DEVICE_SYSCTL_PNPINFO,
DEVICE_SYSCTL_PARENT,
};
static int
device_sysctl_handler(SYSCTL_HANDLER_ARGS)
{
device_t dev = (device_t)arg1;
const char *value;
char *buf;
int error;
buf = NULL;
switch (arg2) {
case DEVICE_SYSCTL_DESC:
value = dev->desc ? dev->desc : "";
break;
case DEVICE_SYSCTL_DRIVER:
value = dev->driver ? dev->driver->name : "";
break;
case DEVICE_SYSCTL_LOCATION:
value = buf = malloc(1024, M_BUS, M_WAITOK | M_ZERO);
bus_child_location_str(dev, buf, 1024);
break;
case DEVICE_SYSCTL_PNPINFO:
value = buf = malloc(1024, M_BUS, M_WAITOK | M_ZERO);
bus_child_pnpinfo_str(dev, buf, 1024);
break;
case DEVICE_SYSCTL_PARENT:
value = dev->parent ? dev->parent->nameunit : "";
break;
default:
return (EINVAL);
}
error = SYSCTL_OUT(req, value, strlen(value));
if (buf != NULL)
free(buf, M_BUS);
return (error);
}
static void
device_sysctl_init(device_t dev)
{
devclass_t dc = dev->devclass;
if (dev->sysctl_tree != NULL)
return;
devclass_sysctl_init(dc);
sysctl_ctx_init(&dev->sysctl_ctx);
dev->sysctl_tree = SYSCTL_ADD_NODE(&dev->sysctl_ctx,
SYSCTL_CHILDREN(dc->sysctl_tree), OID_AUTO,
dev->nameunit + strlen(dc->name),
CTLFLAG_RD, NULL, "");
SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree),
OID_AUTO, "%desc", CTLFLAG_RD,
dev, DEVICE_SYSCTL_DESC, device_sysctl_handler, "A",
"device description");
SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree),
OID_AUTO, "%driver", CTLFLAG_RD,
dev, DEVICE_SYSCTL_DRIVER, device_sysctl_handler, "A",
"device driver name");
SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree),
OID_AUTO, "%location", CTLFLAG_RD,
dev, DEVICE_SYSCTL_LOCATION, device_sysctl_handler, "A",
"device location relative to parent");
SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree),
OID_AUTO, "%pnpinfo", CTLFLAG_RD,
dev, DEVICE_SYSCTL_PNPINFO, device_sysctl_handler, "A",
"device identification");
SYSCTL_ADD_PROC(&dev->sysctl_ctx, SYSCTL_CHILDREN(dev->sysctl_tree),
OID_AUTO, "%parent", CTLFLAG_RD,
dev, DEVICE_SYSCTL_PARENT, device_sysctl_handler, "A",
"parent device");
}
static void
device_sysctl_update(device_t dev)
{
devclass_t dc = dev->devclass;
if (dev->sysctl_tree == NULL)
return;
sysctl_rename_oid(dev->sysctl_tree, dev->nameunit + strlen(dc->name));
}
static void
device_sysctl_fini(device_t dev)
{
if (dev->sysctl_tree == NULL)
return;
sysctl_ctx_free(&dev->sysctl_ctx);
dev->sysctl_tree = NULL;
}
/*
* /dev/devctl implementation
*/
/*
* This design allows only one reader for /dev/devctl. This is not desirable
* in the long run, but will get a lot of hair out of this implementation.
* Maybe we should make this device a clonable device.
*
* Also note: we specifically do not attach a device to the device_t tree
* to avoid potential chicken and egg problems. One could argue that all
* of this belongs to the root node. One could also further argue that the
* sysctl interface that we have not might more properly be an ioctl
* interface, but at this stage of the game, I'm not inclined to rock that
* boat.
*
* I'm also not sure that the SIGIO support is done correctly or not, as
* I copied it from a driver that had SIGIO support that likely hasn't been
* tested since 3.4 or 2.2.8!
*/
/* Deprecated way to adjust queue length */
static int sysctl_devctl_disable(SYSCTL_HANDLER_ARGS);
/* XXX Need to support old-style tunable hw.bus.devctl_disable" */
SYSCTL_PROC(_hw_bus, OID_AUTO, devctl_disable, CTLTYPE_INT | CTLFLAG_RW, NULL,
0, sysctl_devctl_disable, "I", "devctl disable -- deprecated");
#define DEVCTL_DEFAULT_QUEUE_LEN 1000
static int sysctl_devctl_queue(SYSCTL_HANDLER_ARGS);
static int devctl_queue_length = DEVCTL_DEFAULT_QUEUE_LEN;
TUNABLE_INT("hw.bus.devctl_queue", &devctl_queue_length);
SYSCTL_PROC(_hw_bus, OID_AUTO, devctl_queue, CTLTYPE_INT | CTLFLAG_RW, NULL,
0, sysctl_devctl_queue, "I", "devctl queue length");
static d_open_t devopen;
static d_close_t devclose;
static d_read_t devread;
static d_ioctl_t devioctl;
static d_poll_t devpoll;
static struct cdevsw dev_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = devopen,
.d_close = devclose,
.d_read = devread,
.d_ioctl = devioctl,
.d_poll = devpoll,
.d_name = "devctl",
};
struct dev_event_info
{
char *dei_data;
TAILQ_ENTRY(dev_event_info) dei_link;
};
TAILQ_HEAD(devq, dev_event_info);
static struct dev_softc
{
int inuse;
2004-02-24 19:31:30 +00:00
int nonblock;
int queued;
struct mtx mtx;
struct cv cv;
struct selinfo sel;
struct devq devq;
struct proc *async_proc;
} devsoftc;
static struct cdev *devctl_dev;
static void
devinit(void)
{
devctl_dev = make_dev(&dev_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600,
"devctl");
mtx_init(&devsoftc.mtx, "dev mtx", "devd", MTX_DEF);
cv_init(&devsoftc.cv, "dev cv");
TAILQ_INIT(&devsoftc.devq);
}
static int
devopen(struct cdev *dev, int oflags, int devtype, struct thread *td)
{
if (devsoftc.inuse)
return (EBUSY);
/* move to init */
devsoftc.inuse = 1;
devsoftc.nonblock = 0;
devsoftc.async_proc = NULL;
return (0);
}
static int
devclose(struct cdev *dev, int fflag, int devtype, struct thread *td)
{
devsoftc.inuse = 0;
mtx_lock(&devsoftc.mtx);
cv_broadcast(&devsoftc.cv);
mtx_unlock(&devsoftc.mtx);
devsoftc.async_proc = NULL;
return (0);
}
/*
* The read channel for this device is used to report changes to
* userland in realtime. We are required to free the data as well as
* the n1 object because we allocate them separately. Also note that
* we return one record at a time. If you try to read this device a
* character at a time, you will lose the rest of the data. Listening
* programs are expected to cope.
*/
static int
devread(struct cdev *dev, struct uio *uio, int ioflag)
{
struct dev_event_info *n1;
int rv;
mtx_lock(&devsoftc.mtx);
while (TAILQ_EMPTY(&devsoftc.devq)) {
if (devsoftc.nonblock) {
mtx_unlock(&devsoftc.mtx);
return (EAGAIN);
}
rv = cv_wait_sig(&devsoftc.cv, &devsoftc.mtx);
if (rv) {
/*
* Need to translate ERESTART to EINTR here? -- jake
*/
mtx_unlock(&devsoftc.mtx);
return (rv);
}
}
n1 = TAILQ_FIRST(&devsoftc.devq);
TAILQ_REMOVE(&devsoftc.devq, n1, dei_link);
devsoftc.queued--;
mtx_unlock(&devsoftc.mtx);
rv = uiomove(n1->dei_data, strlen(n1->dei_data), uio);
free(n1->dei_data, M_BUS);
free(n1, M_BUS);
return (rv);
}
static int
devioctl(struct cdev *dev, u_long cmd, caddr_t data, int fflag, struct thread *td)
{
switch (cmd) {
case FIONBIO:
if (*(int*)data)
devsoftc.nonblock = 1;
else
devsoftc.nonblock = 0;
return (0);
case FIOASYNC:
if (*(int*)data)
devsoftc.async_proc = td->td_proc;
else
devsoftc.async_proc = NULL;
return (0);
/* (un)Support for other fcntl() calls. */
case FIOCLEX:
case FIONCLEX:
case FIONREAD:
case FIOSETOWN:
case FIOGETOWN:
default:
break;
}
return (ENOTTY);
}
static int
devpoll(struct cdev *dev, int events, struct thread *td)
{
int revents = 0;
mtx_lock(&devsoftc.mtx);
if (events & (POLLIN | POLLRDNORM)) {
if (!TAILQ_EMPTY(&devsoftc.devq))
revents = events & (POLLIN | POLLRDNORM);
else
selrecord(td, &devsoftc.sel);
}
mtx_unlock(&devsoftc.mtx);
return (revents);
}
/**
* @brief Return whether the userland process is running
*/
boolean_t
devctl_process_running(void)
{
return (devsoftc.inuse == 1);
}
/**
* @brief Queue data to be read from the devctl device
*
* Generic interface to queue data to the devctl device. It is
* assumed that @p data is properly formatted. It is further assumed
* that @p data is allocated using the M_BUS malloc type.
*/
void
devctl_queue_data_f(char *data, int flags)
{
struct dev_event_info *n1 = NULL, *n2 = NULL;
struct proc *p;
if (strlen(data) == 0)
goto out;
if (devctl_queue_length == 0)
goto out;
n1 = malloc(sizeof(*n1), M_BUS, flags);
if (n1 == NULL)
goto out;
n1->dei_data = data;
mtx_lock(&devsoftc.mtx);
if (devctl_queue_length == 0) {
mtx_unlock(&devsoftc.mtx);
free(n1->dei_data, M_BUS);
free(n1, M_BUS);
return;
}
/* Leave at least one spot in the queue... */
while (devsoftc.queued > devctl_queue_length - 1) {
n2 = TAILQ_FIRST(&devsoftc.devq);
TAILQ_REMOVE(&devsoftc.devq, n2, dei_link);
free(n2->dei_data, M_BUS);
free(n2, M_BUS);
devsoftc.queued--;
}
2004-02-24 19:31:30 +00:00
TAILQ_INSERT_TAIL(&devsoftc.devq, n1, dei_link);
devsoftc.queued++;
cv_broadcast(&devsoftc.cv);
mtx_unlock(&devsoftc.mtx);
selwakeup(&devsoftc.sel);
p = devsoftc.async_proc;
if (p != NULL) {
PROC_LOCK(p);
psignal(p, SIGIO);
PROC_UNLOCK(p);
}
return;
out:
/*
* We have to free data on all error paths since the caller
* assumes it will be free'd when this item is dequeued.
*/
free(data, M_BUS);
return;
}
void
devctl_queue_data(char *data)
{
devctl_queue_data_f(data, M_NOWAIT);
}
/**
* @brief Send a 'notification' to userland, using standard ways
*/
void
devctl_notify_f(const char *system, const char *subsystem, const char *type,
const char *data, int flags)
{
int len = 0;
char *msg;
if (system == NULL)
return; /* BOGUS! Must specify system. */
if (subsystem == NULL)
return; /* BOGUS! Must specify subsystem. */
if (type == NULL)
return; /* BOGUS! Must specify type. */
len += strlen(" system=") + strlen(system);
len += strlen(" subsystem=") + strlen(subsystem);
len += strlen(" type=") + strlen(type);
/* add in the data message plus newline. */
if (data != NULL)
len += strlen(data);
len += 3; /* '!', '\n', and NUL */
msg = malloc(len, M_BUS, flags);
if (msg == NULL)
return; /* Drop it on the floor */
if (data != NULL)
snprintf(msg, len, "!system=%s subsystem=%s type=%s %s\n",
system, subsystem, type, data);
else
snprintf(msg, len, "!system=%s subsystem=%s type=%s\n",
system, subsystem, type);
devctl_queue_data_f(msg, flags);
}
void
devctl_notify(const char *system, const char *subsystem, const char *type,
const char *data)
{
devctl_notify_f(system, subsystem, type, data, M_NOWAIT);
}
/*
* Common routine that tries to make sending messages as easy as possible.
* We allocate memory for the data, copy strings into that, but do not
* free it unless there's an error. The dequeue part of the driver should
* free the data. We don't send data when the device is disabled. We do
* send data, even when we have no listeners, because we wish to avoid
* races relating to startup and restart of listening applications.
*
* devaddq is designed to string together the type of event, with the
* object of that event, plus the plug and play info and location info
* for that event. This is likely most useful for devices, but less
* useful for other consumers of this interface. Those should use
* the devctl_queue_data() interface instead.
*/
static void
devaddq(const char *type, const char *what, device_t dev)
{
char *data = NULL;
char *loc = NULL;
char *pnp = NULL;
const char *parstr;
if (!devctl_queue_length)/* Rare race, but lost races safely discard */
return;
data = malloc(1024, M_BUS, M_NOWAIT);
if (data == NULL)
goto bad;
/* get the bus specific location of this device */
loc = malloc(1024, M_BUS, M_NOWAIT);
if (loc == NULL)
goto bad;
*loc = '\0';
bus_child_location_str(dev, loc, 1024);
/* Get the bus specific pnp info of this device */
pnp = malloc(1024, M_BUS, M_NOWAIT);
if (pnp == NULL)
goto bad;
*pnp = '\0';
bus_child_pnpinfo_str(dev, pnp, 1024);
/* Get the parent of this device, or / if high enough in the tree. */
if (device_get_parent(dev) == NULL)
parstr = "."; /* Or '/' ? */
else
parstr = device_get_nameunit(device_get_parent(dev));
/* String it all together. */
snprintf(data, 1024, "%s%s at %s %s on %s\n", type, what, loc, pnp,
parstr);
free(loc, M_BUS);
free(pnp, M_BUS);
devctl_queue_data(data);
return;
bad:
free(pnp, M_BUS);
free(loc, M_BUS);
free(data, M_BUS);
return;
}
/*
* A device was added to the tree. We are called just after it successfully
* attaches (that is, probe and attach success for this device). No call
* is made if a device is merely parented into the tree. See devnomatch
* if probe fails. If attach fails, no notification is sent (but maybe
* we should have a different message for this).
*/
static void
devadded(device_t dev)
{
char *pnp = NULL;
char *tmp = NULL;
pnp = malloc(1024, M_BUS, M_NOWAIT);
if (pnp == NULL)
goto fail;
tmp = malloc(1024, M_BUS, M_NOWAIT);
if (tmp == NULL)
goto fail;
*pnp = '\0';
bus_child_pnpinfo_str(dev, pnp, 1024);
snprintf(tmp, 1024, "%s %s", device_get_nameunit(dev), pnp);
devaddq("+", tmp, dev);
fail:
if (pnp != NULL)
free(pnp, M_BUS);
if (tmp != NULL)
free(tmp, M_BUS);
return;
}
/*
* A device was removed from the tree. We are called just before this
* happens.
*/
static void
devremoved(device_t dev)
{
char *pnp = NULL;
char *tmp = NULL;
pnp = malloc(1024, M_BUS, M_NOWAIT);
if (pnp == NULL)
goto fail;
tmp = malloc(1024, M_BUS, M_NOWAIT);
if (tmp == NULL)
goto fail;
*pnp = '\0';
bus_child_pnpinfo_str(dev, pnp, 1024);
snprintf(tmp, 1024, "%s %s", device_get_nameunit(dev), pnp);
devaddq("-", tmp, dev);
fail:
if (pnp != NULL)
free(pnp, M_BUS);
if (tmp != NULL)
free(tmp, M_BUS);
return;
}
/*
* Called when there's no match for this device. This is only called
2009-05-20 17:19:30 +00:00
* the first time that no match happens, so we don't keep getting this
* message. Should that prove to be undesirable, we can change it.
* This is called when all drivers that can attach to a given bus
2010-02-07 18:00:13 +00:00
* decline to accept this device. Other errors may not be detected.
*/
static void
devnomatch(device_t dev)
{
devaddq("?", "", dev);
}
static int
sysctl_devctl_disable(SYSCTL_HANDLER_ARGS)
{
struct dev_event_info *n1;
int dis, error;
dis = devctl_queue_length == 0;
error = sysctl_handle_int(oidp, &dis, 0, req);
if (error || !req->newptr)
return (error);
mtx_lock(&devsoftc.mtx);
if (dis) {
while (!TAILQ_EMPTY(&devsoftc.devq)) {
n1 = TAILQ_FIRST(&devsoftc.devq);
TAILQ_REMOVE(&devsoftc.devq, n1, dei_link);
free(n1->dei_data, M_BUS);
free(n1, M_BUS);
}
devsoftc.queued = 0;
devctl_queue_length = 0;
} else {
devctl_queue_length = DEVCTL_DEFAULT_QUEUE_LEN;
}
mtx_unlock(&devsoftc.mtx);
return (0);
}
static int
sysctl_devctl_queue(SYSCTL_HANDLER_ARGS)
{
struct dev_event_info *n1;
int q, error;
q = devctl_queue_length;
error = sysctl_handle_int(oidp, &q, 0, req);
if (error || !req->newptr)
return (error);
if (q < 0)
return (EINVAL);
mtx_lock(&devsoftc.mtx);
devctl_queue_length = q;
while (devsoftc.queued > devctl_queue_length) {
n1 = TAILQ_FIRST(&devsoftc.devq);
TAILQ_REMOVE(&devsoftc.devq, n1, dei_link);
free(n1->dei_data, M_BUS);
free(n1, M_BUS);
devsoftc.queued--;
}
mtx_unlock(&devsoftc.mtx);
return (0);
}
/* End of /dev/devctl code */
static TAILQ_HEAD(,device) bus_data_devices;
static int bus_data_generation = 1;
static kobj_method_t null_methods[] = {
KOBJMETHOD_END
};
DEFINE_CLASS(null, null_methods, 0);
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/*
* Bus pass implementation
*/
static driver_list_t passes = TAILQ_HEAD_INITIALIZER(passes);
int bus_current_pass = BUS_PASS_ROOT;
/**
* @internal
* @brief Register the pass level of a new driver attachment
*
* Register a new driver attachment's pass level. If no driver
* attachment with the same pass level has been added, then @p new
* will be added to the global passes list.
*
* @param new the new driver attachment
*/
static void
driver_register_pass(struct driverlink *new)
{
struct driverlink *dl;
/* We only consider pass numbers during boot. */
if (bus_current_pass == BUS_PASS_DEFAULT)
return;
/*
* Walk the passes list. If we already know about this pass
* then there is nothing to do. If we don't, then insert this
* driver link into the list.
*/
TAILQ_FOREACH(dl, &passes, passlink) {
if (dl->pass < new->pass)
continue;
if (dl->pass == new->pass)
return;
TAILQ_INSERT_BEFORE(dl, new, passlink);
return;
}
TAILQ_INSERT_TAIL(&passes, new, passlink);
}
/**
* @brief Raise the current bus pass
*
* Raise the current bus pass level to @p pass. Call the BUS_NEW_PASS()
* method on the root bus to kick off a new device tree scan for each
* new pass level that has at least one driver.
*/
void
bus_set_pass(int pass)
{
struct driverlink *dl;
if (bus_current_pass > pass)
panic("Attempt to lower bus pass level");
TAILQ_FOREACH(dl, &passes, passlink) {
/* Skip pass values below the current pass level. */
if (dl->pass <= bus_current_pass)
continue;
/*
* Bail once we hit a driver with a pass level that is
* too high.
*/
if (dl->pass > pass)
break;
/*
* Raise the pass level to the next level and rescan
* the tree.
*/
bus_current_pass = dl->pass;
BUS_NEW_PASS(root_bus);
}
/*
* If there isn't a driver registered for the requested pass,
* then bus_current_pass might still be less than 'pass'. Set
* it to 'pass' in that case.
*/
if (bus_current_pass < pass)
bus_current_pass = pass;
KASSERT(bus_current_pass == pass, ("Failed to update bus pass level"));
}
/*
* Devclass implementation
*/
static devclass_list_t devclasses = TAILQ_HEAD_INITIALIZER(devclasses);
/**
* @internal
* @brief Find or create a device class
*
* If a device class with the name @p classname exists, return it,
* otherwise if @p create is non-zero create and return a new device
* class.
*
* If @p parentname is non-NULL, the parent of the devclass is set to
* the devclass of that name.
*
* @param classname the devclass name to find or create
* @param parentname the parent devclass name or @c NULL
* @param create non-zero to create a devclass
*/
static devclass_t
devclass_find_internal(const char *classname, const char *parentname,
int create)
{
devclass_t dc;
PDEBUG(("looking for %s", classname));
if (!classname)
return (NULL);
TAILQ_FOREACH(dc, &devclasses, link) {
if (!strcmp(dc->name, classname))
break;
}
if (create && !dc) {
PDEBUG(("creating %s", classname));
dc = malloc(sizeof(struct devclass) + strlen(classname) + 1,
M_BUS, M_NOWAIT | M_ZERO);
if (!dc)
return (NULL);
dc->parent = NULL;
dc->name = (char*) (dc + 1);
strcpy(dc->name, classname);
TAILQ_INIT(&dc->drivers);
TAILQ_INSERT_TAIL(&devclasses, dc, link);
bus_data_generation_update();
}
/*
* If a parent class is specified, then set that as our parent so
* that this devclass will support drivers for the parent class as
* well. If the parent class has the same name don't do this though
* as it creates a cycle that can trigger an infinite loop in
* device_probe_child() if a device exists for which there is no
* suitable driver.
*/
if (parentname && dc && !dc->parent &&
strcmp(classname, parentname) != 0) {
dc->parent = devclass_find_internal(parentname, NULL, TRUE);
dc->parent->flags |= DC_HAS_CHILDREN;
}
return (dc);
}
/**
* @brief Create a device class
*
* If a device class with the name @p classname exists, return it,
* otherwise create and return a new device class.
*
* @param classname the devclass name to find or create
*/
devclass_t
devclass_create(const char *classname)
{
return (devclass_find_internal(classname, NULL, TRUE));
}
/**
* @brief Find a device class
*
* If a device class with the name @p classname exists, return it,
* otherwise return @c NULL.
*
* @param classname the devclass name to find
*/
devclass_t
devclass_find(const char *classname)
{
return (devclass_find_internal(classname, NULL, FALSE));
}
/**
* @brief Register that a device driver has been added to a devclass
*
* Register that a device driver has been added to a devclass. This
* is called by devclass_add_driver to accomplish the recursive
* notification of all the children classes of dc, as well as dc.
* Each layer will have BUS_DRIVER_ADDED() called for all instances of
* the devclass. We do a full search here of the devclass list at
* each iteration level to save storing children-lists in the devclass
* structure. If we ever move beyond a few dozen devices doing this,
* we may need to reevaluate...
*
* @param dc the devclass to edit
* @param driver the driver that was just added
*/
static void
devclass_driver_added(devclass_t dc, driver_t *driver)
{
devclass_t parent;
2009-03-11 08:19:31 +00:00
int i;
/*
* Call BUS_DRIVER_ADDED for any existing busses in this class.
*/
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i] && device_is_attached(dc->devices[i]))
BUS_DRIVER_ADDED(dc->devices[i], driver);
/*
* Walk through the children classes. Since we only keep a
* single parent pointer around, we walk the entire list of
* devclasses looking for children. We set the
* DC_HAS_CHILDREN flag when a child devclass is created on
2009-03-11 08:19:31 +00:00
* the parent, so we only walk the list for those devclasses
* that have children.
*/
if (!(dc->flags & DC_HAS_CHILDREN))
return;
parent = dc;
TAILQ_FOREACH(dc, &devclasses, link) {
if (dc->parent == parent)
devclass_driver_added(dc, driver);
}
}
/**
* @brief Add a device driver to a device class
*
* Add a device driver to a devclass. This is normally called
* automatically by DRIVER_MODULE(). The BUS_DRIVER_ADDED() method of
* all devices in the devclass will be called to allow them to attempt
* to re-probe any unmatched children.
*
* @param dc the devclass to edit
* @param driver the driver to register
*/
static int
devclass_add_driver(devclass_t dc, driver_t *driver, int pass, devclass_t *dcp)
{
driverlink_t dl;
const char *parentname;
PDEBUG(("%s", DRIVERNAME(driver)));
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/* Don't allow invalid pass values. */
if (pass <= BUS_PASS_ROOT)
return (EINVAL);
dl = malloc(sizeof *dl, M_BUS, M_NOWAIT|M_ZERO);
if (!dl)
return (ENOMEM);
/*
* Compile the driver's methods. Also increase the reference count
* so that the class doesn't get freed when the last instance
* goes. This means we can safely use static methods and avoids a
* double-free in devclass_delete_driver.
*/
kobj_class_compile((kobj_class_t) driver);
/*
* If the driver has any base classes, make the
* devclass inherit from the devclass of the driver's
* first base class. This will allow the system to
* search for drivers in both devclasses for children
* of a device using this driver.
*/
if (driver->baseclasses)
parentname = driver->baseclasses[0]->name;
else
parentname = NULL;
*dcp = devclass_find_internal(driver->name, parentname, TRUE);
dl->driver = driver;
TAILQ_INSERT_TAIL(&dc->drivers, dl, link);
driver->refs++; /* XXX: kobj_mtx */
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
dl->pass = pass;
driver_register_pass(dl);
devclass_driver_added(dc, driver);
bus_data_generation_update();
return (0);
}
/**
* @brief Delete a device driver from a device class
*
* Delete a device driver from a devclass. This is normally called
* automatically by DRIVER_MODULE().
*
* If the driver is currently attached to any devices,
* devclass_delete_driver() will first attempt to detach from each
* device. If one of the detach calls fails, the driver will not be
* deleted.
*
* @param dc the devclass to edit
* @param driver the driver to unregister
*/
static int
devclass_delete_driver(devclass_t busclass, driver_t *driver)
{
devclass_t dc = devclass_find(driver->name);
driverlink_t dl;
device_t dev;
int i;
int error;
PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass)));
if (!dc)
return (0);
/*
* Find the link structure in the bus' list of drivers.
*/
TAILQ_FOREACH(dl, &busclass->drivers, link) {
if (dl->driver == driver)
break;
}
if (!dl) {
PDEBUG(("%s not found in %s list", driver->name,
busclass->name));
return (ENOENT);
}
/*
* Disassociate from any devices. We iterate through all the
* devices in the devclass of the driver and detach any which are
* using the driver and which have a parent in the devclass which
* we are deleting from.
*
* Note that since a driver can be in multiple devclasses, we
* should not detach devices which are not children of devices in
* the affected devclass.
*/
for (i = 0; i < dc->maxunit; i++) {
if (dc->devices[i]) {
dev = dc->devices[i];
if (dev->driver == driver && dev->parent &&
dev->parent->devclass == busclass) {
if ((error = device_detach(dev)) != 0)
return (error);
device_set_driver(dev, NULL);
BUS_PROBE_NOMATCH(dev->parent, dev);
devnomatch(dev);
dev->flags |= DF_DONENOMATCH;
}
}
}
TAILQ_REMOVE(&busclass->drivers, dl, link);
free(dl, M_BUS);
/* XXX: kobj_mtx */
driver->refs--;
if (driver->refs == 0)
kobj_class_free((kobj_class_t) driver);
bus_data_generation_update();
return (0);
}
/**
* @brief Quiesces a set of device drivers from a device class
*
* Quiesce a device driver from a devclass. This is normally called
* automatically by DRIVER_MODULE().
*
* If the driver is currently attached to any devices,
* devclass_quiesece_driver() will first attempt to quiesce each
* device.
*
* @param dc the devclass to edit
* @param driver the driver to unregister
*/
static int
devclass_quiesce_driver(devclass_t busclass, driver_t *driver)
{
devclass_t dc = devclass_find(driver->name);
driverlink_t dl;
device_t dev;
int i;
int error;
PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass)));
if (!dc)
return (0);
/*
* Find the link structure in the bus' list of drivers.
*/
TAILQ_FOREACH(dl, &busclass->drivers, link) {
if (dl->driver == driver)
break;
}
if (!dl) {
PDEBUG(("%s not found in %s list", driver->name,
busclass->name));
return (ENOENT);
}
/*
* Quiesce all devices. We iterate through all the devices in
* the devclass of the driver and quiesce any which are using
* the driver and which have a parent in the devclass which we
* are quiescing.
*
* Note that since a driver can be in multiple devclasses, we
* should not quiesce devices which are not children of
* devices in the affected devclass.
*/
for (i = 0; i < dc->maxunit; i++) {
if (dc->devices[i]) {
dev = dc->devices[i];
if (dev->driver == driver && dev->parent &&
dev->parent->devclass == busclass) {
if ((error = device_quiesce(dev)) != 0)
return (error);
}
}
}
return (0);
}
/**
* @internal
*/
static driverlink_t
devclass_find_driver_internal(devclass_t dc, const char *classname)
{
driverlink_t dl;
PDEBUG(("%s in devclass %s", classname, DEVCLANAME(dc)));
TAILQ_FOREACH(dl, &dc->drivers, link) {
if (!strcmp(dl->driver->name, classname))
return (dl);
}
PDEBUG(("not found"));
return (NULL);
}
/**
* @brief Return the name of the devclass
*/
const char *
devclass_get_name(devclass_t dc)
{
return (dc->name);
}
/**
* @brief Find a device given a unit number
*
* @param dc the devclass to search
* @param unit the unit number to search for
*
* @returns the device with the given unit number or @c
* NULL if there is no such device
*/
device_t
devclass_get_device(devclass_t dc, int unit)
{
if (dc == NULL || unit < 0 || unit >= dc->maxunit)
return (NULL);
return (dc->devices[unit]);
}
/**
* @brief Find the softc field of a device given a unit number
*
* @param dc the devclass to search
* @param unit the unit number to search for
*
* @returns the softc field of the device with the given
* unit number or @c NULL if there is no such
* device
*/
void *
devclass_get_softc(devclass_t dc, int unit)
{
device_t dev;
dev = devclass_get_device(dc, unit);
if (!dev)
return (NULL);
return (device_get_softc(dev));
}
/**
* @brief Get a list of devices in the devclass
*
* An array containing a list of all the devices in the given devclass
* is allocated and returned in @p *devlistp. The number of devices
* in the array is returned in @p *devcountp. The caller should free
* the array using @c free(p, M_TEMP), even if @p *devcountp is 0.
*
* @param dc the devclass to examine
* @param devlistp points at location for array pointer return
* value
* @param devcountp points at location for array size return value
*
* @retval 0 success
* @retval ENOMEM the array allocation failed
*/
int
devclass_get_devices(devclass_t dc, device_t **devlistp, int *devcountp)
{
int count, i;
device_t *list;
count = devclass_get_count(dc);
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO);
if (!list)
return (ENOMEM);
count = 0;
for (i = 0; i < dc->maxunit; i++) {
if (dc->devices[i]) {
list[count] = dc->devices[i];
count++;
}
}
*devlistp = list;
*devcountp = count;
return (0);
}
/**
* @brief Get a list of drivers in the devclass
*
* An array containing a list of pointers to all the drivers in the
* given devclass is allocated and returned in @p *listp. The number
* of drivers in the array is returned in @p *countp. The caller should
* free the array using @c free(p, M_TEMP).
*
* @param dc the devclass to examine
* @param listp gives location for array pointer return value
* @param countp gives location for number of array elements
* return value
*
* @retval 0 success
* @retval ENOMEM the array allocation failed
*/
int
devclass_get_drivers(devclass_t dc, driver_t ***listp, int *countp)
{
driverlink_t dl;
driver_t **list;
int count;
count = 0;
TAILQ_FOREACH(dl, &dc->drivers, link)
count++;
list = malloc(count * sizeof(driver_t *), M_TEMP, M_NOWAIT);
if (list == NULL)
return (ENOMEM);
count = 0;
TAILQ_FOREACH(dl, &dc->drivers, link) {
list[count] = dl->driver;
count++;
}
*listp = list;
*countp = count;
return (0);
}
/**
* @brief Get the number of devices in a devclass
*
* @param dc the devclass to examine
*/
int
devclass_get_count(devclass_t dc)
{
int count, i;
count = 0;
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i])
count++;
return (count);
}
/**
* @brief Get the maximum unit number used in a devclass
*
* Note that this is one greater than the highest currently-allocated
* unit. If a null devclass_t is passed in, -1 is returned to indicate
* that not even the devclass has been allocated yet.
*
* @param dc the devclass to examine
*/
int
devclass_get_maxunit(devclass_t dc)
{
if (dc == NULL)
return (-1);
return (dc->maxunit);
}
/**
* @brief Find a free unit number in a devclass
*
* This function searches for the first unused unit number greater
* that or equal to @p unit.
*
* @param dc the devclass to examine
* @param unit the first unit number to check
*/
int
devclass_find_free_unit(devclass_t dc, int unit)
{
if (dc == NULL)
return (unit);
while (unit < dc->maxunit && dc->devices[unit] != NULL)
unit++;
return (unit);
}
/**
* @brief Set the parent of a devclass
*
* The parent class is normally initialised automatically by
* DRIVER_MODULE().
*
* @param dc the devclass to edit
* @param pdc the new parent devclass
*/
void
devclass_set_parent(devclass_t dc, devclass_t pdc)
{
dc->parent = pdc;
}
/**
* @brief Get the parent of a devclass
*
* @param dc the devclass to examine
*/
devclass_t
devclass_get_parent(devclass_t dc)
{
return (dc->parent);
}
struct sysctl_ctx_list *
devclass_get_sysctl_ctx(devclass_t dc)
{
return (&dc->sysctl_ctx);
}
struct sysctl_oid *
devclass_get_sysctl_tree(devclass_t dc)
{
return (dc->sysctl_tree);
}
/**
* @internal
* @brief Allocate a unit number
*
* On entry, @p *unitp is the desired unit number (or @c -1 if any
* will do). The allocated unit number is returned in @p *unitp.
* @param dc the devclass to allocate from
* @param unitp points at the location for the allocated unit
* number
*
* @retval 0 success
* @retval EEXIST the requested unit number is already allocated
* @retval ENOMEM memory allocation failure
*/
static int
devclass_alloc_unit(devclass_t dc, device_t dev, int *unitp)
{
const char *s;
int unit = *unitp;
PDEBUG(("unit %d in devclass %s", unit, DEVCLANAME(dc)));
/* Ask the parent bus if it wants to wire this device. */
if (unit == -1)
BUS_HINT_DEVICE_UNIT(device_get_parent(dev), dev, dc->name,
&unit);
/* If we were given a wired unit number, check for existing device */
/* XXX imp XXX */
if (unit != -1) {
if (unit >= 0 && unit < dc->maxunit &&
dc->devices[unit] != NULL) {
if (bootverbose)
printf("%s: %s%d already exists; skipping it\n",
dc->name, dc->name, *unitp);
return (EEXIST);
}
} else {
/* Unwired device, find the next available slot for it */
unit = 0;
for (unit = 0;; unit++) {
/* If there is an "at" hint for a unit then skip it. */
if (resource_string_value(dc->name, unit, "at", &s) ==
0)
continue;
/* If this device slot is already in use, skip it. */
if (unit < dc->maxunit && dc->devices[unit] != NULL)
continue;
break;
}
}
/*
* We've selected a unit beyond the length of the table, so let's
* extend the table to make room for all units up to and including
* this one.
*/
if (unit >= dc->maxunit) {
device_t *newlist, *oldlist;
int newsize;
oldlist = dc->devices;
newsize = roundup((unit + 1), MINALLOCSIZE / sizeof(device_t));
newlist = malloc(sizeof(device_t) * newsize, M_BUS, M_NOWAIT);
if (!newlist)
return (ENOMEM);
if (oldlist != NULL)
bcopy(oldlist, newlist, sizeof(device_t) * dc->maxunit);
bzero(newlist + dc->maxunit,
sizeof(device_t) * (newsize - dc->maxunit));
dc->devices = newlist;
dc->maxunit = newsize;
if (oldlist != NULL)
free(oldlist, M_BUS);
}
PDEBUG(("now: unit %d in devclass %s", unit, DEVCLANAME(dc)));
*unitp = unit;
return (0);
}
/**
* @internal
* @brief Add a device to a devclass
*
* A unit number is allocated for the device (using the device's
* preferred unit number if any) and the device is registered in the
* devclass. This allows the device to be looked up by its unit
* number, e.g. by decoding a dev_t minor number.
*
* @param dc the devclass to add to
* @param dev the device to add
*
* @retval 0 success
* @retval EEXIST the requested unit number is already allocated
* @retval ENOMEM memory allocation failure
*/
static int
devclass_add_device(devclass_t dc, device_t dev)
{
int buflen, error;
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
buflen = snprintf(NULL, 0, "%s%d$", dc->name, INT_MAX);
if (buflen < 0)
return (ENOMEM);
dev->nameunit = malloc(buflen, M_BUS, M_NOWAIT|M_ZERO);
if (!dev->nameunit)
return (ENOMEM);
if ((error = devclass_alloc_unit(dc, dev, &dev->unit)) != 0) {
free(dev->nameunit, M_BUS);
dev->nameunit = NULL;
return (error);
}
dc->devices[dev->unit] = dev;
dev->devclass = dc;
snprintf(dev->nameunit, buflen, "%s%d", dc->name, dev->unit);
return (0);
}
/**
* @internal
* @brief Delete a device from a devclass
*
* The device is removed from the devclass's device list and its unit
* number is freed.
* @param dc the devclass to delete from
* @param dev the device to delete
*
* @retval 0 success
*/
static int
devclass_delete_device(devclass_t dc, device_t dev)
{
if (!dc || !dev)
return (0);
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
if (dev->devclass != dc || dc->devices[dev->unit] != dev)
panic("devclass_delete_device: inconsistent device class");
dc->devices[dev->unit] = NULL;
if (dev->flags & DF_WILDCARD)
dev->unit = -1;
dev->devclass = NULL;
free(dev->nameunit, M_BUS);
dev->nameunit = NULL;
return (0);
}
/**
* @internal
* @brief Make a new device and add it as a child of @p parent
*
* @param parent the parent of the new device
* @param name the devclass name of the new device or @c NULL
* to leave the devclass unspecified
* @parem unit the unit number of the new device of @c -1 to
* leave the unit number unspecified
*
* @returns the new device
*/
static device_t
make_device(device_t parent, const char *name, int unit)
{
device_t dev;
devclass_t dc;
PDEBUG(("%s at %s as unit %d", name, DEVICENAME(parent), unit));
if (name) {
dc = devclass_find_internal(name, NULL, TRUE);
if (!dc) {
printf("make_device: can't find device class %s\n",
name);
return (NULL);
}
} else {
dc = NULL;
}
dev = malloc(sizeof(struct device), M_BUS, M_NOWAIT|M_ZERO);
if (!dev)
return (NULL);
dev->parent = parent;
TAILQ_INIT(&dev->children);
kobj_init((kobj_t) dev, &null_class);
dev->driver = NULL;
dev->devclass = NULL;
dev->unit = unit;
dev->nameunit = NULL;
dev->desc = NULL;
dev->busy = 0;
dev->devflags = 0;
dev->flags = DF_ENABLED;
dev->order = 0;
if (unit == -1)
dev->flags |= DF_WILDCARD;
if (name) {
dev->flags |= DF_FIXEDCLASS;
if (devclass_add_device(dc, dev)) {
kobj_delete((kobj_t) dev, M_BUS);
return (NULL);
}
}
dev->ivars = NULL;
dev->softc = NULL;
dev->state = DS_NOTPRESENT;
TAILQ_INSERT_TAIL(&bus_data_devices, dev, devlink);
bus_data_generation_update();
return (dev);
}
/**
* @internal
* @brief Print a description of a device.
*/
static int
device_print_child(device_t dev, device_t child)
{
int retval = 0;
if (device_is_alive(child))
retval += BUS_PRINT_CHILD(dev, child);
else
retval += device_printf(child, " not found\n");
return (retval);
}
/**
* @brief Create a new device
*
* This creates a new device and adds it as a child of an existing
* parent device. The new device will be added after the last existing
* child with order zero.
*
* @param dev the device which will be the parent of the
* new child device
* @param name devclass name for new device or @c NULL if not
* specified
* @param unit unit number for new device or @c -1 if not
* specified
*
* @returns the new device
*/
device_t
device_add_child(device_t dev, const char *name, int unit)
{
return (device_add_child_ordered(dev, 0, name, unit));
}
/**
* @brief Create a new device
*
* This creates a new device and adds it as a child of an existing
* parent device. The new device will be added after the last existing
* child with the same order.
*
* @param dev the device which will be the parent of the
* new child device
* @param order a value which is used to partially sort the
* children of @p dev - devices created using
* lower values of @p order appear first in @p
* dev's list of children
* @param name devclass name for new device or @c NULL if not
* specified
* @param unit unit number for new device or @c -1 if not
* specified
*
* @returns the new device
*/
device_t
device_add_child_ordered(device_t dev, u_int order, const char *name, int unit)
{
device_t child;
device_t place;
PDEBUG(("%s at %s with order %u as unit %d",
name, DEVICENAME(dev), order, unit));
child = make_device(dev, name, unit);
if (child == NULL)
return (child);
child->order = order;
TAILQ_FOREACH(place, &dev->children, link) {
if (place->order > order)
break;
}
if (place) {
/*
* The device 'place' is the first device whose order is
* greater than the new child.
*/
TAILQ_INSERT_BEFORE(place, child, link);
} else {
/*
* The new child's order is greater or equal to the order of
* any existing device. Add the child to the tail of the list.
*/
TAILQ_INSERT_TAIL(&dev->children, child, link);
}
bus_data_generation_update();
return (child);
}
/**
* @brief Delete a device
*
* This function deletes a device along with all of its children. If
* the device currently has a driver attached to it, the device is
* detached first using device_detach().
*
* @param dev the parent device
* @param child the device to delete
*
* @retval 0 success
* @retval non-zero a unit error code describing the error
*/
int
device_delete_child(device_t dev, device_t child)
{
int error;
device_t grandchild;
PDEBUG(("%s from %s", DEVICENAME(child), DEVICENAME(dev)));
/* remove children first */
while ( (grandchild = TAILQ_FIRST(&child->children)) ) {
error = device_delete_child(child, grandchild);
if (error)
return (error);
}
if ((error = device_detach(child)) != 0)
return (error);
if (child->devclass)
devclass_delete_device(child->devclass, child);
TAILQ_REMOVE(&dev->children, child, link);
TAILQ_REMOVE(&bus_data_devices, child, devlink);
kobj_delete((kobj_t) child, M_BUS);
bus_data_generation_update();
return (0);
}
/**
* @brief Find a device given a unit number
*
* This is similar to devclass_get_devices() but only searches for
* devices which have @p dev as a parent.
*
* @param dev the parent device to search
* @param unit the unit number to search for. If the unit is -1,
* return the first child of @p dev which has name
* @p classname (that is, the one with the lowest unit.)
*
* @returns the device with the given unit number or @c
* NULL if there is no such device
*/
device_t
device_find_child(device_t dev, const char *classname, int unit)
{
devclass_t dc;
device_t child;
dc = devclass_find(classname);
if (!dc)
return (NULL);
if (unit != -1) {
child = devclass_get_device(dc, unit);
if (child && child->parent == dev)
return (child);
} else {
for (unit = 0; unit < devclass_get_maxunit(dc); unit++) {
child = devclass_get_device(dc, unit);
if (child && child->parent == dev)
return (child);
}
}
return (NULL);
}
/**
* @internal
*/
static driverlink_t
first_matching_driver(devclass_t dc, device_t dev)
{
if (dev->devclass)
return (devclass_find_driver_internal(dc, dev->devclass->name));
return (TAILQ_FIRST(&dc->drivers));
}
/**
* @internal
*/
static driverlink_t
next_matching_driver(devclass_t dc, device_t dev, driverlink_t last)
{
if (dev->devclass) {
driverlink_t dl;
for (dl = TAILQ_NEXT(last, link); dl; dl = TAILQ_NEXT(dl, link))
if (!strcmp(dev->devclass->name, dl->driver->name))
return (dl);
return (NULL);
}
return (TAILQ_NEXT(last, link));
}
/**
* @internal
*/
2005-09-18 01:32:09 +00:00
int
device_probe_child(device_t dev, device_t child)
{
devclass_t dc;
driverlink_t best = NULL;
driverlink_t dl;
int result, pri = 0;
int hasclass = (child->devclass != NULL);
GIANT_REQUIRED;
dc = dev->devclass;
if (!dc)
panic("device_probe_child: parent device has no devclass");
/*
* If the state is already probed, then return. However, don't
* return if we can rebid this object.
*/
if (child->state == DS_ALIVE && (child->flags & DF_REBID) == 0)
return (0);
for (; dc; dc = dc->parent) {
for (dl = first_matching_driver(dc, child);
dl;
dl = next_matching_driver(dc, child, dl)) {
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/* If this driver's pass is too high, then ignore it. */
if (dl->pass > bus_current_pass)
continue;
PDEBUG(("Trying %s", DRIVERNAME(dl->driver)));
device_set_driver(child, dl->driver);
if (!hasclass) {
if (device_set_devclass(child, dl->driver->name)) {
printf("driver bug: Unable to set devclass (devname: %s)\n",
(child ? device_get_name(child) :
"no device"));
device_set_driver(child, NULL);
continue;
}
}
/* Fetch any flags for the device before probing. */
resource_int_value(dl->driver->name, child->unit,
"flags", &child->devflags);
result = DEVICE_PROBE(child);
/* Reset flags and devclass before the next probe. */
child->devflags = 0;
if (!hasclass)
device_set_devclass(child, NULL);
/*
* If the driver returns SUCCESS, there can be
* no higher match for this device.
*/
if (result == 0) {
best = dl;
pri = 0;
break;
}
/*
* The driver returned an error so it
* certainly doesn't match.
*/
if (result > 0) {
device_set_driver(child, NULL);
continue;
}
/*
* A priority lower than SUCCESS, remember the
* best matching driver. Initialise the value
* of pri for the first match.
*/
if (best == NULL || result > pri) {
/*
* Probes that return BUS_PROBE_NOWILDCARD
* or lower only match when they are set
* in stone by the parent bus.
*/
if (result <= BUS_PROBE_NOWILDCARD &&
child->flags & DF_WILDCARD)
continue;
best = dl;
pri = result;
continue;
}
}
/*
* If we have an unambiguous match in this devclass,
* don't look in the parent.
*/
if (best && pri == 0)
break;
}
/*
* If we found a driver, change state and initialise the devclass.
*/
/* XXX What happens if we rebid and got no best? */
if (best) {
/*
* If this device was atached, and we were asked to
* rescan, and it is a different driver, then we have
* to detach the old driver and reattach this new one.
* Note, we don't have to check for DF_REBID here
* because if the state is > DS_ALIVE, we know it must
* be.
*
* This assumes that all DF_REBID drivers can have
* their probe routine called at any time and that
* they are idempotent as well as completely benign in
* normal operations.
*
* We also have to make sure that the detach
* succeeded, otherwise we fail the operation (or
* maybe it should just fail silently? I'm torn).
*/
if (child->state > DS_ALIVE && best->driver != child->driver)
if ((result = device_detach(dev)) != 0)
return (result);
/* Set the winning driver, devclass, and flags. */
if (!child->devclass) {
result = device_set_devclass(child, best->driver->name);
if (result != 0)
return (result);
}
device_set_driver(child, best->driver);
resource_int_value(best->driver->name, child->unit,
"flags", &child->devflags);
if (pri < 0) {
/*
* A bit bogus. Call the probe method again to make
* sure that we have the right description.
*/
DEVICE_PROBE(child);
#if 0
child->flags |= DF_REBID;
#endif
} else
child->flags &= ~DF_REBID;
child->state = DS_ALIVE;
bus_data_generation_update();
return (0);
}
return (ENXIO);
}
/**
* @brief Return the parent of a device
*/
device_t
device_get_parent(device_t dev)
{
return (dev->parent);
}
/**
* @brief Get a list of children of a device
*
* An array containing a list of all the children of the given device
* is allocated and returned in @p *devlistp. The number of devices
* in the array is returned in @p *devcountp. The caller should free
* the array using @c free(p, M_TEMP).
*
* @param dev the device to examine
* @param devlistp points at location for array pointer return
* value
* @param devcountp points at location for array size return value
*
* @retval 0 success
* @retval ENOMEM the array allocation failed
*/
int
device_get_children(device_t dev, device_t **devlistp, int *devcountp)
{
int count;
device_t child;
device_t *list;
count = 0;
TAILQ_FOREACH(child, &dev->children, link) {
count++;
}
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT|M_ZERO);
if (!list)
return (ENOMEM);
count = 0;
TAILQ_FOREACH(child, &dev->children, link) {
list[count] = child;
count++;
}
*devlistp = list;
*devcountp = count;
return (0);
}
/**
* @brief Return the current driver for the device or @c NULL if there
* is no driver currently attached
*/
driver_t *
device_get_driver(device_t dev)
{
return (dev->driver);
}
/**
* @brief Return the current devclass for the device or @c NULL if
* there is none.
*/
devclass_t
device_get_devclass(device_t dev)
{
return (dev->devclass);
}
/**
* @brief Return the name of the device's devclass or @c NULL if there
* is none.
*/
const char *
device_get_name(device_t dev)
{
if (dev != NULL && dev->devclass)
return (devclass_get_name(dev->devclass));
return (NULL);
}
/**
* @brief Return a string containing the device's devclass name
* followed by an ascii representation of the device's unit number
* (e.g. @c "foo2").
*/
const char *
device_get_nameunit(device_t dev)
{
return (dev->nameunit);
}
/**
* @brief Return the device's unit number.
*/
int
device_get_unit(device_t dev)
{
return (dev->unit);
}
/**
* @brief Return the device's description string
*/
const char *
device_get_desc(device_t dev)
{
return (dev->desc);
}
/**
* @brief Return the device's flags
*/
uint32_t
device_get_flags(device_t dev)
{
return (dev->devflags);
}
struct sysctl_ctx_list *
device_get_sysctl_ctx(device_t dev)
{
return (&dev->sysctl_ctx);
}
struct sysctl_oid *
device_get_sysctl_tree(device_t dev)
{
return (dev->sysctl_tree);
}
/**
* @brief Print the name of the device followed by a colon and a space
*
* @returns the number of characters printed
*/
int
device_print_prettyname(device_t dev)
{
const char *name = device_get_name(dev);
if (name == NULL)
return (printf("unknown: "));
return (printf("%s%d: ", name, device_get_unit(dev)));
}
/**
* @brief Print the name of the device followed by a colon, a space
* and the result of calling vprintf() with the value of @p fmt and
* the following arguments.
*
* @returns the number of characters printed
*/
int
device_printf(device_t dev, const char * fmt, ...)
{
va_list ap;
int retval;
retval = device_print_prettyname(dev);
va_start(ap, fmt);
retval += vprintf(fmt, ap);
va_end(ap);
return (retval);
}
/**
* @internal
*/
static void
device_set_desc_internal(device_t dev, const char* desc, int copy)
{
if (dev->desc && (dev->flags & DF_DESCMALLOCED)) {
free(dev->desc, M_BUS);
dev->flags &= ~DF_DESCMALLOCED;
dev->desc = NULL;
}
if (copy && desc) {
dev->desc = malloc(strlen(desc) + 1, M_BUS, M_NOWAIT);
if (dev->desc) {
strcpy(dev->desc, desc);
dev->flags |= DF_DESCMALLOCED;
}
} else {
/* Avoid a -Wcast-qual warning */
dev->desc = (char *)(uintptr_t) desc;
}
bus_data_generation_update();
}
/**
* @brief Set the device's description
*
* The value of @c desc should be a string constant that will not
* change (at least until the description is changed in a subsequent
* call to device_set_desc() or device_set_desc_copy()).
*/
void
device_set_desc(device_t dev, const char* desc)
{
device_set_desc_internal(dev, desc, FALSE);
}
/**
* @brief Set the device's description
*
* The string pointed to by @c desc is copied. Use this function if
* the device description is generated, (e.g. with sprintf()).
*/
void
device_set_desc_copy(device_t dev, const char* desc)
{
device_set_desc_internal(dev, desc, TRUE);
}
/**
* @brief Set the device's flags
*/
void
device_set_flags(device_t dev, uint32_t flags)
{
dev->devflags = flags;
}
/**
* @brief Return the device's softc field
*
* The softc is allocated and zeroed when a driver is attached, based
* on the size field of the driver.
*/
void *
device_get_softc(device_t dev)
{
return (dev->softc);
}
/**
* @brief Set the device's softc field
*
* Most drivers do not need to use this since the softc is allocated
* automatically when the driver is attached.
*/
void
device_set_softc(device_t dev, void *softc)
{
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC))
free(dev->softc, M_BUS_SC);
dev->softc = softc;
if (dev->softc)
dev->flags |= DF_EXTERNALSOFTC;
else
dev->flags &= ~DF_EXTERNALSOFTC;
}
/**
* @brief Get the device's ivars field
*
* The ivars field is used by the parent device to store per-device
* state (e.g. the physical location of the device or a list of
* resources).
*/
void *
device_get_ivars(device_t dev)
{
KASSERT(dev != NULL, ("device_get_ivars(NULL, ...)"));
return (dev->ivars);
}
/**
* @brief Set the device's ivars field
*/
void
device_set_ivars(device_t dev, void * ivars)
{
KASSERT(dev != NULL, ("device_set_ivars(NULL, ...)"));
dev->ivars = ivars;
}
/**
* @brief Return the device's state
*/
device_state_t
device_get_state(device_t dev)
{
return (dev->state);
}
/**
* @brief Set the DF_ENABLED flag for the device
*/
void
device_enable(device_t dev)
{
dev->flags |= DF_ENABLED;
}
/**
* @brief Clear the DF_ENABLED flag for the device
*/
void
device_disable(device_t dev)
{
dev->flags &= ~DF_ENABLED;
}
/**
* @brief Increment the busy counter for the device
*/
void
device_busy(device_t dev)
{
if (dev->state < DS_ATTACHED)
panic("device_busy: called for unattached device");
if (dev->busy == 0 && dev->parent)
device_busy(dev->parent);
dev->busy++;
dev->state = DS_BUSY;
}
/**
* @brief Decrement the busy counter for the device
*/
void
device_unbusy(device_t dev)
{
if (dev->state != DS_BUSY)
panic("device_unbusy: called for non-busy device %s",
device_get_nameunit(dev));
dev->busy--;
if (dev->busy == 0) {
if (dev->parent)
device_unbusy(dev->parent);
dev->state = DS_ATTACHED;
}
}
/**
* @brief Set the DF_QUIET flag for the device
*/
void
device_quiet(device_t dev)
{
dev->flags |= DF_QUIET;
}
/**
* @brief Clear the DF_QUIET flag for the device
*/
void
device_verbose(device_t dev)
{
dev->flags &= ~DF_QUIET;
}
/**
* @brief Return non-zero if the DF_QUIET flag is set on the device
*/
int
device_is_quiet(device_t dev)
{
return ((dev->flags & DF_QUIET) != 0);
}
/**
* @brief Return non-zero if the DF_ENABLED flag is set on the device
*/
int
device_is_enabled(device_t dev)
{
return ((dev->flags & DF_ENABLED) != 0);
}
/**
* @brief Return non-zero if the device was successfully probed
*/
int
device_is_alive(device_t dev)
{
return (dev->state >= DS_ALIVE);
}
/**
* @brief Return non-zero if the device currently has a driver
* attached to it
*/
int
device_is_attached(device_t dev)
{
return (dev->state >= DS_ATTACHED);
}
/**
* @brief Set the devclass of a device
* @see devclass_add_device().
*/
int
device_set_devclass(device_t dev, const char *classname)
{
devclass_t dc;
int error;
if (!classname) {
if (dev->devclass)
devclass_delete_device(dev->devclass, dev);
return (0);
}
if (dev->devclass) {
printf("device_set_devclass: device class already set\n");
return (EINVAL);
}
dc = devclass_find_internal(classname, NULL, TRUE);
if (!dc)
return (ENOMEM);
error = devclass_add_device(dc, dev);
bus_data_generation_update();
return (error);
}
/**
* @brief Set the driver of a device
*
* @retval 0 success
* @retval EBUSY the device already has a driver attached
* @retval ENOMEM a memory allocation failure occurred
*/
int
device_set_driver(device_t dev, driver_t *driver)
{
if (dev->state >= DS_ATTACHED)
return (EBUSY);
if (dev->driver == driver)
return (0);
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) {
free(dev->softc, M_BUS_SC);
dev->softc = NULL;
}
kobj_delete((kobj_t) dev, NULL);
dev->driver = driver;
if (driver) {
kobj_init((kobj_t) dev, (kobj_class_t) driver);
if (!(dev->flags & DF_EXTERNALSOFTC) && driver->size > 0) {
dev->softc = malloc(driver->size, M_BUS_SC,
M_NOWAIT | M_ZERO);
if (!dev->softc) {
kobj_delete((kobj_t) dev, NULL);
kobj_init((kobj_t) dev, &null_class);
dev->driver = NULL;
return (ENOMEM);
}
}
} else {
kobj_init((kobj_t) dev, &null_class);
}
bus_data_generation_update();
return (0);
}
/**
* @brief Probe a device, and return this status.
*
* This function is the core of the device autoconfiguration
* system. Its purpose is to select a suitable driver for a device and
* then call that driver to initialise the hardware appropriately. The
* driver is selected by calling the DEVICE_PROBE() method of a set of
* candidate drivers and then choosing the driver which returned the
* best value. This driver is then attached to the device using
* device_attach().
*
* The set of suitable drivers is taken from the list of drivers in
* the parent device's devclass. If the device was originally created
* with a specific class name (see device_add_child()), only drivers
* with that name are probed, otherwise all drivers in the devclass
* are probed. If no drivers return successful probe values in the
* parent devclass, the search continues in the parent of that
* devclass (see devclass_get_parent()) if any.
*
* @param dev the device to initialise
*
* @retval 0 success
* @retval ENXIO no driver was found
* @retval ENOMEM memory allocation failure
* @retval non-zero some other unix error code
* @retval -1 Device already attached
*/
int
device_probe(device_t dev)
{
int error;
GIANT_REQUIRED;
if (dev->state >= DS_ALIVE && (dev->flags & DF_REBID) == 0)
return (-1);
if (!(dev->flags & DF_ENABLED)) {
if (bootverbose && device_get_name(dev) != NULL) {
device_print_prettyname(dev);
printf("not probed (disabled)\n");
}
return (-1);
}
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
if ((error = device_probe_child(dev->parent, dev)) != 0) {
if (bus_current_pass == BUS_PASS_DEFAULT &&
!(dev->flags & DF_DONENOMATCH)) {
BUS_PROBE_NOMATCH(dev->parent, dev);
devnomatch(dev);
dev->flags |= DF_DONENOMATCH;
}
return (error);
}
return (0);
}
/**
* @brief Probe a device and attach a driver if possible
*
* calls device_probe() and attaches if that was successful.
*/
int
device_probe_and_attach(device_t dev)
{
int error;
GIANT_REQUIRED;
error = device_probe(dev);
if (error == -1)
return (0);
else if (error != 0)
return (error);
return (device_attach(dev));
}
/**
* @brief Attach a device driver to a device
*
* This function is a wrapper around the DEVICE_ATTACH() driver
* method. In addition to calling DEVICE_ATTACH(), it initialises the
* device's sysctl tree, optionally prints a description of the device
* and queues a notification event for user-based device management
* services.
*
* Normally this function is only called internally from
* device_probe_and_attach().
*
* @param dev the device to initialise
*
* @retval 0 success
* @retval ENXIO no driver was found
* @retval ENOMEM memory allocation failure
* @retval non-zero some other unix error code
*/
int
device_attach(device_t dev)
{
int error;
device_sysctl_init(dev);
if (!device_is_quiet(dev))
device_print_child(dev->parent, dev);
if ((error = DEVICE_ATTACH(dev)) != 0) {
printf("device_attach: %s%d attach returned %d\n",
dev->driver->name, dev->unit, error);
/* Unset the class; set in device_probe_child */
if (dev->devclass == NULL)
device_set_devclass(dev, NULL);
device_set_driver(dev, NULL);
device_sysctl_fini(dev);
dev->state = DS_NOTPRESENT;
return (error);
}
device_sysctl_update(dev);
dev->state = DS_ATTACHED;
dev->flags &= ~DF_DONENOMATCH;
devadded(dev);
return (0);
}
/**
* @brief Detach a driver from a device
*
* This function is a wrapper around the DEVICE_DETACH() driver
* method. If the call to DEVICE_DETACH() succeeds, it calls
* BUS_CHILD_DETACHED() for the parent of @p dev, queues a
* notification event for user-based device management services and
* cleans up the device's sysctl tree.
*
* @param dev the device to un-initialise
*
* @retval 0 success
* @retval ENXIO no driver was found
* @retval ENOMEM memory allocation failure
* @retval non-zero some other unix error code
*/
int
device_detach(device_t dev)
{
int error;
GIANT_REQUIRED;
PDEBUG(("%s", DEVICENAME(dev)));
if (dev->state == DS_BUSY)
return (EBUSY);
if (dev->state != DS_ATTACHED)
return (0);
if ((error = DEVICE_DETACH(dev)) != 0)
return (error);
devremoved(dev);
if (!device_is_quiet(dev))
device_printf(dev, "detached\n");
if (dev->parent)
BUS_CHILD_DETACHED(dev->parent, dev);
if (!(dev->flags & DF_FIXEDCLASS))
devclass_delete_device(dev->devclass, dev);
dev->state = DS_NOTPRESENT;
device_set_driver(dev, NULL);
device_set_desc(dev, NULL);
device_sysctl_fini(dev);
return (0);
}
/**
* @brief Tells a driver to quiesce itself.
*
* This function is a wrapper around the DEVICE_QUIESCE() driver
* method. If the call to DEVICE_QUIESCE() succeeds.
*
* @param dev the device to quiesce
*
* @retval 0 success
* @retval ENXIO no driver was found
* @retval ENOMEM memory allocation failure
* @retval non-zero some other unix error code
*/
int
device_quiesce(device_t dev)
{
PDEBUG(("%s", DEVICENAME(dev)));
if (dev->state == DS_BUSY)
return (EBUSY);
if (dev->state != DS_ATTACHED)
return (0);
return (DEVICE_QUIESCE(dev));
}
/**
* @brief Notify a device of system shutdown
*
* This function calls the DEVICE_SHUTDOWN() driver method if the
* device currently has an attached driver.
*
* @returns the value returned by DEVICE_SHUTDOWN()
*/
int
device_shutdown(device_t dev)
{
if (dev->state < DS_ATTACHED)
return (0);
return (DEVICE_SHUTDOWN(dev));
}
/**
* @brief Set the unit number of a device
*
* This function can be used to override the unit number used for a
* device (e.g. to wire a device to a pre-configured unit number).
*/
int
device_set_unit(device_t dev, int unit)
{
devclass_t dc;
int err;
dc = device_get_devclass(dev);
if (unit < dc->maxunit && dc->devices[unit])
return (EBUSY);
err = devclass_delete_device(dc, dev);
if (err)
return (err);
dev->unit = unit;
err = devclass_add_device(dc, dev);
if (err)
return (err);
bus_data_generation_update();
return (0);
}
/*======================================*/
/*
* Some useful method implementations to make life easier for bus drivers.
*/
/**
* @brief Initialise a resource list.
*
* @param rl the resource list to initialise
*/
void
resource_list_init(struct resource_list *rl)
{
STAILQ_INIT(rl);
}
/**
* @brief Reclaim memory used by a resource list.
*
* This function frees the memory for all resource entries on the list
* (if any).
*
* @param rl the resource list to free
*/
void
resource_list_free(struct resource_list *rl)
{
struct resource_list_entry *rle;
while ((rle = STAILQ_FIRST(rl)) != NULL) {
if (rle->res)
panic("resource_list_free: resource entry is busy");
STAILQ_REMOVE_HEAD(rl, link);
free(rle, M_BUS);
}
}
/**
* @brief Add a resource entry.
*
* This function adds a resource entry using the given @p type, @p
* start, @p end and @p count values. A rid value is chosen by
* searching sequentially for the first unused rid starting at zero.
*
* @param rl the resource list to edit
* @param type the resource entry type (e.g. SYS_RES_MEMORY)
* @param start the start address of the resource
* @param end the end address of the resource
* @param count XXX end-start+1
*/
int
resource_list_add_next(struct resource_list *rl, int type, u_long start,
u_long end, u_long count)
{
int rid;
rid = 0;
while (resource_list_find(rl, type, rid) != NULL)
rid++;
resource_list_add(rl, type, rid, start, end, count);
return (rid);
}
/**
* @brief Add or modify a resource entry.
*
* If an existing entry exists with the same type and rid, it will be
* modified using the given values of @p start, @p end and @p
* count. If no entry exists, a new one will be created using the
* given values. The resource list entry that matches is then returned.
*
* @param rl the resource list to edit
* @param type the resource entry type (e.g. SYS_RES_MEMORY)
* @param rid the resource identifier
* @param start the start address of the resource
* @param end the end address of the resource
* @param count XXX end-start+1
*/
struct resource_list_entry *
resource_list_add(struct resource_list *rl, int type, int rid,
u_long start, u_long end, u_long count)
{
struct resource_list_entry *rle;
rle = resource_list_find(rl, type, rid);
if (!rle) {
rle = malloc(sizeof(struct resource_list_entry), M_BUS,
M_NOWAIT);
if (!rle)
panic("resource_list_add: can't record entry");
STAILQ_INSERT_TAIL(rl, rle, link);
rle->type = type;
rle->rid = rid;
rle->res = NULL;
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
rle->flags = 0;
}
if (rle->res)
panic("resource_list_add: resource entry is busy");
rle->start = start;
rle->end = end;
rle->count = count;
return (rle);
}
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
/**
* @brief Determine if a resource entry is busy.
*
* Returns true if a resource entry is busy meaning that it has an
* associated resource that is not an unallocated "reserved" resource.
*
* @param rl the resource list to search
* @param type the resource entry type (e.g. SYS_RES_MEMORY)
* @param rid the resource identifier
*
* @returns Non-zero if the entry is busy, zero otherwise.
*/
int
resource_list_busy(struct resource_list *rl, int type, int rid)
{
struct resource_list_entry *rle;
rle = resource_list_find(rl, type, rid);
if (rle == NULL || rle->res == NULL)
return (0);
if ((rle->flags & (RLE_RESERVED | RLE_ALLOCATED)) == RLE_RESERVED) {
KASSERT(!(rman_get_flags(rle->res) & RF_ACTIVE),
("reserved resource is active"));
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
return (0);
}
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
return (1);
}
/**
* @brief Find a resource entry by type and rid.
*
* @param rl the resource list to search
* @param type the resource entry type (e.g. SYS_RES_MEMORY)
* @param rid the resource identifier
*
* @returns the resource entry pointer or NULL if there is no such
* entry.
*/
struct resource_list_entry *
resource_list_find(struct resource_list *rl, int type, int rid)
{
struct resource_list_entry *rle;
STAILQ_FOREACH(rle, rl, link) {
if (rle->type == type && rle->rid == rid)
return (rle);
}
return (NULL);
}
/**
* @brief Delete a resource entry.
*
* @param rl the resource list to edit
* @param type the resource entry type (e.g. SYS_RES_MEMORY)
* @param rid the resource identifier
*/
void
resource_list_delete(struct resource_list *rl, int type, int rid)
{
struct resource_list_entry *rle = resource_list_find(rl, type, rid);
if (rle) {
if (rle->res != NULL)
panic("resource_list_delete: resource has not been released");
STAILQ_REMOVE(rl, rle, resource_list_entry, link);
free(rle, M_BUS);
}
}
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
/**
* @brief Allocate a reserved resource
*
* This can be used by busses to force the allocation of resources
* that are always active in the system even if they are not allocated
* by a driver (e.g. PCI BARs). This function is usually called when
* adding a new child to the bus. The resource is allocated from the
* parent bus when it is reserved. The resource list entry is marked
* with RLE_RESERVED to note that it is a reserved resource.
*
* Subsequent attempts to allocate the resource with
* resource_list_alloc() will succeed the first time and will set
* RLE_ALLOCATED to note that it has been allocated. When a reserved
* resource that has been allocated is released with
* resource_list_release() the resource RLE_ALLOCATED is cleared, but
* the actual resource remains allocated. The resource can be released to
* the parent bus by calling resource_list_unreserve().
*
* @param rl the resource list to allocate from
* @param bus the parent device of @p child
* @param child the device for which the resource is being reserved
* @param type the type of resource to allocate
* @param rid a pointer to the resource identifier
* @param start hint at the start of the resource range - pass
* @c 0UL for any start address
* @param end hint at the end of the resource range - pass
* @c ~0UL for any end address
* @param count hint at the size of range required - pass @c 1
* for any size
* @param flags any extra flags to control the resource
* allocation - see @c RF_XXX flags in
* <sys/rman.h> for details
*
* @returns the resource which was allocated or @c NULL if no
* resource could be allocated
*/
struct resource *
resource_list_reserve(struct resource_list *rl, device_t bus, device_t child,
int type, int *rid, u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list_entry *rle = NULL;
int passthrough = (device_get_parent(child) != bus);
struct resource *r;
if (passthrough)
panic(
"resource_list_reserve() should only be called for direct children");
if (flags & RF_ACTIVE)
panic(
"resource_list_reserve() should only reserve inactive resources");
r = resource_list_alloc(rl, bus, child, type, rid, start, end, count,
flags);
if (r != NULL) {
rle = resource_list_find(rl, type, *rid);
rle->flags |= RLE_RESERVED;
}
return (r);
}
/**
* @brief Helper function for implementing BUS_ALLOC_RESOURCE()
*
* Implement BUS_ALLOC_RESOURCE() by looking up a resource from the list
* and passing the allocation up to the parent of @p bus. This assumes
* that the first entry of @c device_get_ivars(child) is a struct
* resource_list. This also handles 'passthrough' allocations where a
* child is a remote descendant of bus by passing the allocation up to
* the parent of bus.
*
* Typically, a bus driver would store a list of child resources
* somewhere in the child device's ivars (see device_get_ivars()) and
* its implementation of BUS_ALLOC_RESOURCE() would find that list and
* then call resource_list_alloc() to perform the allocation.
*
* @param rl the resource list to allocate from
* @param bus the parent device of @p child
* @param child the device which is requesting an allocation
* @param type the type of resource to allocate
* @param rid a pointer to the resource identifier
* @param start hint at the start of the resource range - pass
* @c 0UL for any start address
* @param end hint at the end of the resource range - pass
* @c ~0UL for any end address
* @param count hint at the size of range required - pass @c 1
* for any size
* @param flags any extra flags to control the resource
* allocation - see @c RF_XXX flags in
* <sys/rman.h> for details
*
* @returns the resource which was allocated or @c NULL if no
* resource could be allocated
*/
struct resource *
resource_list_alloc(struct resource_list *rl, device_t bus, device_t child,
int type, int *rid, u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list_entry *rle = NULL;
int passthrough = (device_get_parent(child) != bus);
int isdefault = (start == 0UL && end == ~0UL);
if (passthrough) {
return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
type, rid, start, end, count, flags));
}
rle = resource_list_find(rl, type, *rid);
if (!rle)
return (NULL); /* no resource of that type/rid */
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
if (rle->res) {
if (rle->flags & RLE_RESERVED) {
if (rle->flags & RLE_ALLOCATED)
return (NULL);
if ((flags & RF_ACTIVE) &&
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
bus_activate_resource(child, type, *rid,
rle->res) != 0)
return (NULL);
rle->flags |= RLE_ALLOCATED;
return (rle->res);
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
}
panic("resource_list_alloc: resource entry is busy");
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
}
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
type, rid, start, end, count, flags);
/*
* Record the new range.
*/
if (rle->res) {
rle->start = rman_get_start(rle->res);
rle->end = rman_get_end(rle->res);
rle->count = count;
}
return (rle->res);
}
/**
* @brief Helper function for implementing BUS_RELEASE_RESOURCE()
*
* Implement BUS_RELEASE_RESOURCE() using a resource list. Normally
* used with resource_list_alloc().
*
* @param rl the resource list which was allocated from
* @param bus the parent device of @p child
* @param child the device which is requesting a release
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
* @param type the type of resource to release
* @param rid the resource identifier
* @param res the resource to release
*
* @retval 0 success
* @retval non-zero a standard unix error code indicating what
* error condition prevented the operation
*/
int
resource_list_release(struct resource_list *rl, device_t bus, device_t child,
int type, int rid, struct resource *res)
{
struct resource_list_entry *rle = NULL;
int passthrough = (device_get_parent(child) != bus);
int error;
if (passthrough) {
return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, res));
}
rle = resource_list_find(rl, type, rid);
if (!rle)
panic("resource_list_release: can't find resource");
if (!rle->res)
panic("resource_list_release: resource entry is not busy");
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
if (rle->flags & RLE_RESERVED) {
if (rle->flags & RLE_ALLOCATED) {
if (rman_get_flags(res) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type,
rid, res);
if (error)
return (error);
}
rle->flags &= ~RLE_ALLOCATED;
return (0);
}
return (EINVAL);
}
error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
type, rid, res);
if (error)
return (error);
rle->res = NULL;
return (0);
}
For some buses, devices may have active resources assigned even though they are not allocated by the device driver. These resources should still appear allocated from the system's perspective so that their assigned ranges are not reused by other resource requests. The PCI bus driver has used a hack to effect this for a while now where it uses rman_set_device() to assign devices to the PCI bus when they are first encountered and later assigns them to the actual device when a driver allocates a BAR. A few downsides of this approach is that it results in somewhat confusing devinfo -r output as well as not being very easily portable to other bus drivers. This commit adds generic support for "reserved" resources to the resource list API used by many bus drivers to manage the resources of child devices. A resource may be reserved via resource_list_reserve(). This will allocate the resource from the bus' parent without activating it. resource_list_alloc() recognizes an attempt to allocate a reserved resource. When this happens it activates the resource (if requested) and then returns the reserved resource. Similarly, when a reserved resource is released via resource_list_release(), it is deactivated (if it is active) and the resource is then marked reserved again, but is left allocated from the bus' parent. To completely remove a reserved resource, a bus driver may use resource_list_unreserve(). A bus driver may use resource_list_busy() to determine if a reserved resource is allocated by a child device or if it can be unreserved. The PCI bus driver has been changed to use this framework instead of abusing rman_set_device() to keep track of reserved vs allocated resources. Submitted by: imp (an older version many moons ago) MFC after: 1 month
2009-12-09 21:52:53 +00:00
/**
* @brief Fully release a reserved resource
*
* Fully releases a resouce reserved via resource_list_reserve().
*
* @param rl the resource list which was allocated from
* @param bus the parent device of @p child
* @param child the device whose reserved resource is being released
* @param type the type of resource to release
* @param rid the resource identifier
* @param res the resource to release
*
* @retval 0 success
* @retval non-zero a standard unix error code indicating what
* error condition prevented the operation
*/
int
resource_list_unreserve(struct resource_list *rl, device_t bus, device_t child,
int type, int rid)
{
struct resource_list_entry *rle = NULL;
int passthrough = (device_get_parent(child) != bus);
if (passthrough)
panic(
"resource_list_unreserve() should only be called for direct children");
rle = resource_list_find(rl, type, rid);
if (!rle)
panic("resource_list_unreserve: can't find resource");
if (!(rle->flags & RLE_RESERVED))
return (EINVAL);
if (rle->flags & RLE_ALLOCATED)
return (EBUSY);
rle->flags &= ~RLE_RESERVED;
return (resource_list_release(rl, bus, child, type, rid, rle->res));
}
/**
* @brief Print a description of resources in a resource list
*
* Print all resources of a specified type, for use in BUS_PRINT_CHILD().
* The name is printed if at least one resource of the given type is available.
* The format is used to print resource start and end.
*
* @param rl the resource list to print
* @param name the name of @p type, e.g. @c "memory"
* @param type type type of resource entry to print
* @param format printf(9) format string to print resource
* start and end values
*
* @returns the number of characters printed
*/
int
resource_list_print_type(struct resource_list *rl, const char *name, int type,
const char *format)
{
struct resource_list_entry *rle;
int printed, retval;
printed = 0;
retval = 0;
/* Yes, this is kinda cheating */
STAILQ_FOREACH(rle, rl, link) {
if (rle->type == type) {
if (printed == 0)
retval += printf(" %s ", name);
else
retval += printf(",");
printed++;
retval += printf(format, rle->start);
if (rle->count > 1) {
retval += printf("-");
retval += printf(format, rle->start +
rle->count - 1);
}
}
}
return (retval);
}
/**
* @brief Releases all the resources in a list.
*
* @param rl The resource list to purge.
*
* @returns nothing
*/
void
resource_list_purge(struct resource_list *rl)
{
struct resource_list_entry *rle;
while ((rle = STAILQ_FIRST(rl)) != NULL) {
if (rle->res)
bus_release_resource(rman_get_device(rle->res),
rle->type, rle->rid, rle->res);
STAILQ_REMOVE_HEAD(rl, link);
free(rle, M_BUS);
}
}
device_t
bus_generic_add_child(device_t dev, u_int order, const char *name, int unit)
{
return (device_add_child_ordered(dev, order, name, unit));
}
/**
* @brief Helper function for implementing DEVICE_PROBE()
*
* This function can be used to help implement the DEVICE_PROBE() for
* a bus (i.e. a device which has other devices attached to it). It
* calls the DEVICE_IDENTIFY() method of each driver in the device's
* devclass.
*/
int
bus_generic_probe(device_t dev)
{
devclass_t dc = dev->devclass;
driverlink_t dl;
TAILQ_FOREACH(dl, &dc->drivers, link) {
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/*
* If this driver's pass is too high, then ignore it.
* For most drivers in the default pass, this will
* never be true. For early-pass drivers they will
* only call the identify routines of eligible drivers
* when this routine is called. Drivers for later
* passes should have their identify routines called
* on early-pass busses during BUS_NEW_PASS().
*/
if (dl->pass > bus_current_pass)
continue;
DEVICE_IDENTIFY(dl->driver, dev);
}
return (0);
}
/**
* @brief Helper function for implementing DEVICE_ATTACH()
*
* This function can be used to help implement the DEVICE_ATTACH() for
* a bus. It calls device_probe_and_attach() for each of the device's
* children.
*/
int
bus_generic_attach(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
device_probe_and_attach(child);
}
return (0);
}
/**
* @brief Helper function for implementing DEVICE_DETACH()
*
* This function can be used to help implement the DEVICE_DETACH() for
* a bus. It calls device_detach() for each of the device's
* children.
*/
int
bus_generic_detach(device_t dev)
{
device_t child;
int error;
if (dev->state != DS_ATTACHED)
return (EBUSY);
TAILQ_FOREACH(child, &dev->children, link) {
if ((error = device_detach(child)) != 0)
return (error);
}
return (0);
}
/**
* @brief Helper function for implementing DEVICE_SHUTDOWN()
*
* This function can be used to help implement the DEVICE_SHUTDOWN()
* for a bus. It calls device_shutdown() for each of the device's
* children.
*/
int
bus_generic_shutdown(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
device_shutdown(child);
}
return (0);
}
/**
* @brief Helper function for implementing DEVICE_SUSPEND()
*
* This function can be used to help implement the DEVICE_SUSPEND()
* for a bus. It calls DEVICE_SUSPEND() for each of the device's
* children. If any call to DEVICE_SUSPEND() fails, the suspend
* operation is aborted and any devices which were suspended are
* resumed immediately by calling their DEVICE_RESUME() methods.
*/
int
bus_generic_suspend(device_t dev)
{
int error;
device_t child, child2;
TAILQ_FOREACH(child, &dev->children, link) {
error = DEVICE_SUSPEND(child);
if (error) {
for (child2 = TAILQ_FIRST(&dev->children);
child2 && child2 != child;
child2 = TAILQ_NEXT(child2, link))
DEVICE_RESUME(child2);
return (error);
}
}
return (0);
}
/**
* @brief Helper function for implementing DEVICE_RESUME()
*
* This function can be used to help implement the DEVICE_RESUME() for
* a bus. It calls DEVICE_RESUME() on each of the device's children.
*/
int
bus_generic_resume(device_t dev)
{
device_t child;
TAILQ_FOREACH(child, &dev->children, link) {
DEVICE_RESUME(child);
/* if resume fails, there's nothing we can usefully do... */
}
return (0);
}
/**
* @brief Helper function for implementing BUS_PRINT_CHILD().
*
* This function prints the first part of the ascii representation of
* @p child, including its name, unit and description (if any - see
* device_set_desc()).
*
* @returns the number of characters printed
*/
int
2003-11-05 06:14:48 +00:00
bus_print_child_header(device_t dev, device_t child)
{
int retval = 0;
if (device_get_desc(child)) {
retval += device_printf(child, "<%s>", device_get_desc(child));
} else {
retval += printf("%s", device_get_nameunit(child));
}
return (retval);
}
/**
* @brief Helper function for implementing BUS_PRINT_CHILD().
*
* This function prints the last part of the ascii representation of
* @p child, which consists of the string @c " on " followed by the
* name and unit of the @p dev.
*
* @returns the number of characters printed
*/
int
2003-11-05 06:14:48 +00:00
bus_print_child_footer(device_t dev, device_t child)
{
return (printf(" on %s\n", device_get_nameunit(dev)));
}
/**
* @brief Helper function for implementing BUS_PRINT_CHILD().
*
* This function simply calls bus_print_child_header() followed by
* bus_print_child_footer().
*
* @returns the number of characters printed
*/
int
bus_generic_print_child(device_t dev, device_t child)
{
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += bus_print_child_footer(dev, child);
return (retval);
}
/**
* @brief Stub function for implementing BUS_READ_IVAR().
*
* @returns ENOENT
*/
int
bus_generic_read_ivar(device_t dev, device_t child, int index,
uintptr_t * result)
{
return (ENOENT);
}
/**
* @brief Stub function for implementing BUS_WRITE_IVAR().
*
* @returns ENOENT
*/
int
bus_generic_write_ivar(device_t dev, device_t child, int index,
uintptr_t value)
{
return (ENOENT);
}
/**
* @brief Stub function for implementing BUS_GET_RESOURCE_LIST().
*
* @returns NULL
*/
struct resource_list *
2003-11-05 06:14:48 +00:00
bus_generic_get_resource_list(device_t dev, device_t child)
{
return (NULL);
}
/**
* @brief Helper function for implementing BUS_DRIVER_ADDED().
*
* This implementation of BUS_DRIVER_ADDED() simply calls the driver's
* DEVICE_IDENTIFY() method to allow it to add new children to the bus
* and then calls device_probe_and_attach() for each unattached child.
*/
void
bus_generic_driver_added(device_t dev, driver_t *driver)
{
device_t child;
DEVICE_IDENTIFY(driver, dev);
TAILQ_FOREACH(child, &dev->children, link) {
if (child->state == DS_NOTPRESENT ||
(child->flags & DF_REBID))
device_probe_and_attach(child);
}
}
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/**
* @brief Helper function for implementing BUS_NEW_PASS().
*
* This implementing of BUS_NEW_PASS() first calls the identify
* routines for any drivers that probe at the current pass. Then it
* walks the list of devices for this bus. If a device is already
* attached, then it calls BUS_NEW_PASS() on that device. If the
* device is not already attached, it attempts to attach a driver to
* it.
*/
void
bus_generic_new_pass(device_t dev)
{
driverlink_t dl;
devclass_t dc;
device_t child;
dc = dev->devclass;
TAILQ_FOREACH(dl, &dc->drivers, link) {
if (dl->pass == bus_current_pass)
DEVICE_IDENTIFY(dl->driver, dev);
}
TAILQ_FOREACH(child, &dev->children, link) {
if (child->state >= DS_ATTACHED)
BUS_NEW_PASS(child);
else if (child->state == DS_NOTPRESENT)
device_probe_and_attach(child);
}
}
/**
* @brief Helper function for implementing BUS_SETUP_INTR().
*
* This simple implementation of BUS_SETUP_INTR() simply calls the
* BUS_SETUP_INTR() method of the parent of @p dev.
*/
int
bus_generic_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_filter_t *filter, driver_intr_t *intr, void *arg,
void **cookiep)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_SETUP_INTR(dev->parent, child, irq, flags,
filter, intr, arg, cookiep));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_TEARDOWN_INTR().
*
* This simple implementation of BUS_TEARDOWN_INTR() simply calls the
* BUS_TEARDOWN_INTR() method of the parent of @p dev.
*/
int
bus_generic_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_TEARDOWN_INTR(dev->parent, child, irq, cookie));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_ALLOC_RESOURCE().
*
* This simple implementation of BUS_ALLOC_RESOURCE() simply calls the
* BUS_ALLOC_RESOURCE() method of the parent of @p dev.
*/
struct resource *
bus_generic_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_ALLOC_RESOURCE(dev->parent, child, type, rid,
start, end, count, flags));
return (NULL);
}
/**
* @brief Helper function for implementing BUS_RELEASE_RESOURCE().
*
* This simple implementation of BUS_RELEASE_RESOURCE() simply calls the
* BUS_RELEASE_RESOURCE() method of the parent of @p dev.
*/
int
bus_generic_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_RELEASE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_ACTIVATE_RESOURCE().
*
* This simple implementation of BUS_ACTIVATE_RESOURCE() simply calls the
* BUS_ACTIVATE_RESOURCE() method of the parent of @p dev.
*/
int
bus_generic_activate_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_ACTIVATE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_DEACTIVATE_RESOURCE().
*
* This simple implementation of BUS_DEACTIVATE_RESOURCE() simply calls the
* BUS_DEACTIVATE_RESOURCE() method of the parent of @p dev.
*/
int
bus_generic_deactivate_resource(device_t dev, device_t child, int type,
int rid, struct resource *r)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_DEACTIVATE_RESOURCE(dev->parent, child, type, rid,
r));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_BIND_INTR().
*
* This simple implementation of BUS_BIND_INTR() simply calls the
* BUS_BIND_INTR() method of the parent of @p dev.
*/
int
bus_generic_bind_intr(device_t dev, device_t child, struct resource *irq,
int cpu)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_BIND_INTR(dev->parent, child, irq, cpu));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_CONFIG_INTR().
*
* This simple implementation of BUS_CONFIG_INTR() simply calls the
* BUS_CONFIG_INTR() method of the parent of @p dev.
*/
int
bus_generic_config_intr(device_t dev, int irq, enum intr_trigger trig,
enum intr_polarity pol)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_CONFIG_INTR(dev->parent, irq, trig, pol));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_DESCRIBE_INTR().
*
* This simple implementation of BUS_DESCRIBE_INTR() simply calls the
* BUS_DESCRIBE_INTR() method of the parent of @p dev.
*/
int
bus_generic_describe_intr(device_t dev, device_t child, struct resource *irq,
void *cookie, const char *descr)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent)
return (BUS_DESCRIBE_INTR(dev->parent, child, irq, cookie,
descr));
return (EINVAL);
}
/**
* @brief Helper function for implementing BUS_GET_DMA_TAG().
*
* This simple implementation of BUS_GET_DMA_TAG() simply calls the
* BUS_GET_DMA_TAG() method of the parent of @p dev.
*/
bus_dma_tag_t
bus_generic_get_dma_tag(device_t dev, device_t child)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (dev->parent != NULL)
return (BUS_GET_DMA_TAG(dev->parent, child));
return (NULL);
}
/**
* @brief Helper function for implementing BUS_GET_RESOURCE().
*
* This implementation of BUS_GET_RESOURCE() uses the
* resource_list_find() function to do most of the work. It calls
* BUS_GET_RESOURCE_LIST() to find a suitable resource list to
* search.
*/
int
2003-11-05 06:14:48 +00:00
bus_generic_rl_get_resource(device_t dev, device_t child, int type, int rid,
u_long *startp, u_long *countp)
{
struct resource_list * rl = NULL;
struct resource_list_entry * rle = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
rle = resource_list_find(rl, type, rid);
if (!rle)
return (ENOENT);
if (startp)
*startp = rle->start;
if (countp)
*countp = rle->count;
return (0);
}
/**
* @brief Helper function for implementing BUS_SET_RESOURCE().
*
* This implementation of BUS_SET_RESOURCE() uses the
* resource_list_add() function to do most of the work. It calls
* BUS_GET_RESOURCE_LIST() to find a suitable resource list to
* edit.
*/
int
2003-11-05 06:14:48 +00:00
bus_generic_rl_set_resource(device_t dev, device_t child, int type, int rid,
u_long start, u_long count)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
resource_list_add(rl, type, rid, start, (start + count - 1), count);
return (0);
}
/**
* @brief Helper function for implementing BUS_DELETE_RESOURCE().
*
* This implementation of BUS_DELETE_RESOURCE() uses the
* resource_list_delete() function to do most of the work. It calls
* BUS_GET_RESOURCE_LIST() to find a suitable resource list to
* edit.
*/
void
2003-11-05 06:14:48 +00:00
bus_generic_rl_delete_resource(device_t dev, device_t child, int type, int rid)
{
struct resource_list * rl = NULL;
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return;
resource_list_delete(rl, type, rid);
return;
}
/**
* @brief Helper function for implementing BUS_RELEASE_RESOURCE().
*
* This implementation of BUS_RELEASE_RESOURCE() uses the
* resource_list_release() function to do most of the work. It calls
* BUS_GET_RESOURCE_LIST() to find a suitable resource list.
*/
int
2003-11-05 06:14:48 +00:00
bus_generic_rl_release_resource(device_t dev, device_t child, int type,
int rid, struct resource *r)
{
struct resource_list * rl = NULL;
if (device_get_parent(child) != dev)
return (BUS_RELEASE_RESOURCE(device_get_parent(dev), child,
type, rid, r));
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (EINVAL);
return (resource_list_release(rl, dev, child, type, rid, r));
}
/**
* @brief Helper function for implementing BUS_ALLOC_RESOURCE().
*
* This implementation of BUS_ALLOC_RESOURCE() uses the
* resource_list_alloc() function to do most of the work. It calls
* BUS_GET_RESOURCE_LIST() to find a suitable resource list.
*/
struct resource *
2003-11-05 06:14:48 +00:00
bus_generic_rl_alloc_resource(device_t dev, device_t child, int type,
int *rid, u_long start, u_long end, u_long count, u_int flags)
{
struct resource_list * rl = NULL;
if (device_get_parent(child) != dev)
return (BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
type, rid, start, end, count, flags));
rl = BUS_GET_RESOURCE_LIST(dev, child);
if (!rl)
return (NULL);
return (resource_list_alloc(rl, dev, child, type, rid,
start, end, count, flags));
}
/**
* @brief Helper function for implementing BUS_CHILD_PRESENT().
*
* This simple implementation of BUS_CHILD_PRESENT() simply calls the
* BUS_CHILD_PRESENT() method of the parent of @p dev.
*/
int
bus_generic_child_present(device_t dev, device_t child)
{
return (BUS_CHILD_PRESENT(device_get_parent(dev), dev));
}
/*
* Some convenience functions to make it easier for drivers to use the
* resource-management functions. All these really do is hide the
* indirection through the parent's method table, making for slightly
* less-wordy code. In the future, it might make sense for this code
* to maintain some sort of a list of resources allocated by each device.
*/
int
bus_alloc_resources(device_t dev, struct resource_spec *rs,
struct resource **res)
{
int i;
for (i = 0; rs[i].type != -1; i++)
res[i] = NULL;
for (i = 0; rs[i].type != -1; i++) {
res[i] = bus_alloc_resource_any(dev,
rs[i].type, &rs[i].rid, rs[i].flags);
if (res[i] == NULL && !(rs[i].flags & RF_OPTIONAL)) {
bus_release_resources(dev, rs, res);
return (ENXIO);
}
}
return (0);
}
void
bus_release_resources(device_t dev, const struct resource_spec *rs,
struct resource **res)
{
int i;
for (i = 0; rs[i].type != -1; i++)
if (res[i] != NULL) {
bus_release_resource(
dev, rs[i].type, rs[i].rid, res[i]);
res[i] = NULL;
}
}
/**
* @brief Wrapper function for BUS_ALLOC_RESOURCE().
*
* This function simply calls the BUS_ALLOC_RESOURCE() method of the
* parent of @p dev.
*/
struct resource *
bus_alloc_resource(device_t dev, int type, int *rid, u_long start, u_long end,
u_long count, u_int flags)
{
if (dev->parent == NULL)
return (NULL);
return (BUS_ALLOC_RESOURCE(dev->parent, dev, type, rid, start, end,
count, flags));
}
/**
* @brief Wrapper function for BUS_ACTIVATE_RESOURCE().
*
* This function simply calls the BUS_ACTIVATE_RESOURCE() method of the
* parent of @p dev.
*/
int
bus_activate_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == NULL)
return (EINVAL);
return (BUS_ACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
}
/**
* @brief Wrapper function for BUS_DEACTIVATE_RESOURCE().
*
* This function simply calls the BUS_DEACTIVATE_RESOURCE() method of the
* parent of @p dev.
*/
int
bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == NULL)
return (EINVAL);
return (BUS_DEACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
}
/**
* @brief Wrapper function for BUS_RELEASE_RESOURCE().
*
* This function simply calls the BUS_RELEASE_RESOURCE() method of the
* parent of @p dev.
*/
int
bus_release_resource(device_t dev, int type, int rid, struct resource *r)
{
if (dev->parent == NULL)
return (EINVAL);
return (BUS_RELEASE_RESOURCE(dev->parent, dev, type, rid, r));
}
/**
* @brief Wrapper function for BUS_SETUP_INTR().
*
* This function simply calls the BUS_SETUP_INTR() method of the
* parent of @p dev.
*/
int
bus_setup_intr(device_t dev, struct resource *r, int flags,
driver_filter_t filter, driver_intr_t handler, void *arg, void **cookiep)
{
int error;
if (dev->parent == NULL)
return (EINVAL);
error = BUS_SETUP_INTR(dev->parent, dev, r, flags, filter, handler,
arg, cookiep);
if (error != 0)
return (error);
if (handler != NULL && !(flags & INTR_MPSAFE))
device_printf(dev, "[GIANT-LOCKED]\n");
return (0);
}
/**
* @brief Wrapper function for BUS_TEARDOWN_INTR().
*
* This function simply calls the BUS_TEARDOWN_INTR() method of the
* parent of @p dev.
*/
int
bus_teardown_intr(device_t dev, struct resource *r, void *cookie)
{
if (dev->parent == NULL)
return (EINVAL);
return (BUS_TEARDOWN_INTR(dev->parent, dev, r, cookie));
}
/**
* @brief Wrapper function for BUS_BIND_INTR().
*
* This function simply calls the BUS_BIND_INTR() method of the
* parent of @p dev.
*/
int
bus_bind_intr(device_t dev, struct resource *r, int cpu)
{
if (dev->parent == NULL)
return (EINVAL);
return (BUS_BIND_INTR(dev->parent, dev, r, cpu));
}
/**
* @brief Wrapper function for BUS_DESCRIBE_INTR().
*
* This function first formats the requested description into a
* temporary buffer and then calls the BUS_DESCRIBE_INTR() method of
* the parent of @p dev.
*/
int
bus_describe_intr(device_t dev, struct resource *irq, void *cookie,
const char *fmt, ...)
{
va_list ap;
char descr[MAXCOMLEN + 1];
if (dev->parent == NULL)
return (EINVAL);
va_start(ap, fmt);
vsnprintf(descr, sizeof(descr), fmt, ap);
va_end(ap);
return (BUS_DESCRIBE_INTR(dev->parent, dev, irq, cookie, descr));
}
/**
* @brief Wrapper function for BUS_SET_RESOURCE().
*
* This function simply calls the BUS_SET_RESOURCE() method of the
* parent of @p dev.
*/
int
bus_set_resource(device_t dev, int type, int rid,
u_long start, u_long count)
{
return (BUS_SET_RESOURCE(device_get_parent(dev), dev, type, rid,
start, count));
}
/**
* @brief Wrapper function for BUS_GET_RESOURCE().
*
* This function simply calls the BUS_GET_RESOURCE() method of the
* parent of @p dev.
*/
int
bus_get_resource(device_t dev, int type, int rid,
u_long *startp, u_long *countp)
{
return (BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
startp, countp));
}
/**
* @brief Wrapper function for BUS_GET_RESOURCE().
*
* This function simply calls the BUS_GET_RESOURCE() method of the
* parent of @p dev and returns the start value.
*/
u_long
bus_get_resource_start(device_t dev, int type, int rid)
{
u_long start, count;
int error;
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
&start, &count);
if (error)
return (0);
return (start);
}
/**
* @brief Wrapper function for BUS_GET_RESOURCE().
*
* This function simply calls the BUS_GET_RESOURCE() method of the
* parent of @p dev and returns the count value.
*/
u_long
bus_get_resource_count(device_t dev, int type, int rid)
{
u_long start, count;
int error;
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
&start, &count);
if (error)
return (0);
return (count);
}
/**
* @brief Wrapper function for BUS_DELETE_RESOURCE().
*
* This function simply calls the BUS_DELETE_RESOURCE() method of the
* parent of @p dev.
*/
void
bus_delete_resource(device_t dev, int type, int rid)
{
BUS_DELETE_RESOURCE(device_get_parent(dev), dev, type, rid);
}
/**
* @brief Wrapper function for BUS_CHILD_PRESENT().
*
* This function simply calls the BUS_CHILD_PRESENT() method of the
* parent of @p dev.
*/
int
bus_child_present(device_t child)
{
return (BUS_CHILD_PRESENT(device_get_parent(child), child));
}
/**
* @brief Wrapper function for BUS_CHILD_PNPINFO_STR().
*
* This function simply calls the BUS_CHILD_PNPINFO_STR() method of the
* parent of @p dev.
*/
int
bus_child_pnpinfo_str(device_t child, char *buf, size_t buflen)
{
device_t parent;
2004-02-24 19:31:30 +00:00
parent = device_get_parent(child);
if (parent == NULL) {
*buf = '\0';
return (0);
}
return (BUS_CHILD_PNPINFO_STR(parent, child, buf, buflen));
}
/**
* @brief Wrapper function for BUS_CHILD_LOCATION_STR().
*
* This function simply calls the BUS_CHILD_LOCATION_STR() method of the
* parent of @p dev.
*/
int
bus_child_location_str(device_t child, char *buf, size_t buflen)
{
device_t parent;
2004-02-24 19:31:30 +00:00
parent = device_get_parent(child);
if (parent == NULL) {
*buf = '\0';
return (0);
}
return (BUS_CHILD_LOCATION_STR(parent, child, buf, buflen));
}
/**
* @brief Wrapper function for BUS_GET_DMA_TAG().
*
* This function simply calls the BUS_GET_DMA_TAG() method of the
* parent of @p dev.
*/
bus_dma_tag_t
bus_get_dma_tag(device_t dev)
{
device_t parent;
parent = device_get_parent(dev);
if (parent == NULL)
return (NULL);
return (BUS_GET_DMA_TAG(parent, dev));
}
/* Resume all devices and then notify userland that we're up again. */
static int
root_resume(device_t dev)
{
int error;
error = bus_generic_resume(dev);
if (error == 0)
devctl_notify("kern", "power", "resume", NULL);
return (error);
}
static int
root_print_child(device_t dev, device_t child)
{
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += printf("\n");
return (retval);
}
static int
root_setup_intr(device_t dev, device_t child, struct resource *irq, int flags,
driver_filter_t *filter, driver_intr_t *intr, void *arg, void **cookiep)
{
/*
* If an interrupt mapping gets to here something bad has happened.
*/
panic("root_setup_intr");
}
/*
* If we get here, assume that the device is permanant and really is
* present in the system. Removable bus drivers are expected to intercept
* this call long before it gets here. We return -1 so that drivers that
* really care can check vs -1 or some ERRNO returned higher in the food
* chain.
*/
static int
root_child_present(device_t dev, device_t child)
{
return (-1);
}
static kobj_method_t root_methods[] = {
/* Device interface */
KOBJMETHOD(device_shutdown, bus_generic_shutdown),
KOBJMETHOD(device_suspend, bus_generic_suspend),
KOBJMETHOD(device_resume, root_resume),
/* Bus interface */
KOBJMETHOD(bus_print_child, root_print_child),
KOBJMETHOD(bus_read_ivar, bus_generic_read_ivar),
KOBJMETHOD(bus_write_ivar, bus_generic_write_ivar),
KOBJMETHOD(bus_setup_intr, root_setup_intr),
KOBJMETHOD(bus_child_present, root_child_present),
KOBJMETHOD_END
};
static driver_t root_driver = {
"root",
root_methods,
1, /* no softc */
};
device_t root_bus;
devclass_t root_devclass;
static int
root_bus_module_handler(module_t mod, int what, void* arg)
{
switch (what) {
case MOD_LOAD:
TAILQ_INIT(&bus_data_devices);
kobj_class_compile((kobj_class_t) &root_driver);
root_bus = make_device(NULL, "root", 0);
root_bus->desc = "System root bus";
kobj_init((kobj_t) root_bus, (kobj_class_t) &root_driver);
root_bus->driver = &root_driver;
root_bus->state = DS_ATTACHED;
root_devclass = devclass_find_internal("root", NULL, FALSE);
devinit();
return (0);
case MOD_SHUTDOWN:
device_shutdown(root_bus);
return (0);
default:
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t root_bus_mod = {
"rootbus",
root_bus_module_handler,
NULL
};
DECLARE_MODULE(rootbus, root_bus_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
/**
* @brief Automatically configure devices
*
* This function begins the autoconfiguration process by calling
* device_probe_and_attach() for each child of the @c root0 device.
*/
void
root_bus_configure(void)
{
PDEBUG(("."));
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
/* Eventually this will be split up, but this is sufficient for now. */
bus_set_pass(BUS_PASS_DEFAULT);
}
/**
* @brief Module handler for registering device drivers
*
* This module handler is used to automatically register device
* drivers when modules are loaded. If @p what is MOD_LOAD, it calls
* devclass_add_driver() for the driver described by the
* driver_module_data structure pointed to by @p arg
*/
int
driver_module_handler(module_t mod, int what, void *arg)
{
struct driver_module_data *dmd;
devclass_t bus_devclass;
kobj_class_t driver;
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
int error, pass;
dmd = (struct driver_module_data *)arg;
bus_devclass = devclass_find_internal(dmd->dmd_busname, NULL, TRUE);
error = 0;
switch (what) {
case MOD_LOAD:
if (dmd->dmd_chainevh)
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
pass = dmd->dmd_pass;
driver = dmd->dmd_driver;
Add support for multiple passes of the device tree during the boot-time probe. The current device order is unchanged. This commit just adds the infrastructure and ABI changes so that it is easier to merge later changes into 8.x. - Driver attachments now have an associated pass level. Attachments are not allowed to probe or attach to drivers until the system-wide pass level is >= the attachment's pass level. By default driver attachments use the "last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which accepts the pass level as an additional parameter. - A new method BUS_NEW_PASS has been added to the bus interface. This method is invoked when the system-wide pass level is changed to kick off a rescan of the device tree so that drivers that have just been made "eligible" can probe and attach. - The bus_generic_new_pass() function provides a default implementation of BUS_NEW_PASS(). It first allows drivers that were just made eligible for this pass to identify new child devices. Then it propogates the rescan to child devices that already have an attached driver by invoking their BUS_NEW_PASS() method. It also reprobes devices without a driver. - BUS_PROBE_NOMATCH() is only invoked for devices that do not have an attached driver after being scanned during the final pass. - The bus_set_pass() function is used during boot to raise the pass level. Currently it is only called once during root_bus_configure() to raise the pass level to BUS_PASS_DEFAULT. This has the effect of probing all devices in a single pass identical to previous behavior. Reviewed by: imp Approved by: re (kib)
2009-06-09 14:26:23 +00:00
PDEBUG(("Loading module: driver %s on bus %s (pass %d)",
DRIVERNAME(driver), dmd->dmd_busname, pass));
error = devclass_add_driver(bus_devclass, driver, pass,
dmd->dmd_devclass);
break;
case MOD_UNLOAD:
PDEBUG(("Unloading module: driver %s from bus %s",
DRIVERNAME(dmd->dmd_driver),
dmd->dmd_busname));
error = devclass_delete_driver(bus_devclass,
dmd->dmd_driver);
if (!error && dmd->dmd_chainevh)
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
break;
case MOD_QUIESCE:
PDEBUG(("Quiesce module: driver %s from bus %s",
DRIVERNAME(dmd->dmd_driver),
dmd->dmd_busname));
error = devclass_quiesce_driver(bus_devclass,
dmd->dmd_driver);
if (!error && dmd->dmd_chainevh)
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
/**
* @brief Enumerate all hinted devices for this bus.
*
2007-05-23 17:28:21 +00:00
* Walks through the hints for this bus and calls the bus_hinted_child
* routine for each one it fines. It searches first for the specific
* bus that's being probed for hinted children (eg isa0), and then for
* generic children (eg isa).
*
* @param dev bus device to enumerate
*/
void
bus_enumerate_hinted_children(device_t bus)
{
int i;
const char *dname, *busname;
int dunit;
/*
* enumerate all devices on the specific bus
*/
busname = device_get_nameunit(bus);
i = 0;
while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0)
BUS_HINTED_CHILD(bus, dname, dunit);
/*
* and all the generic ones.
*/
busname = device_get_name(bus);
i = 0;
while (resource_find_match(&i, &dname, &dunit, "at", busname) == 0)
BUS_HINTED_CHILD(bus, dname, dunit);
}
#ifdef BUS_DEBUG
/* the _short versions avoid iteration by not calling anything that prints
* more than oneliners. I love oneliners.
*/
static void
print_device_short(device_t dev, int indent)
{
if (!dev)
return;
2004-08-30 05:48:49 +00:00
indentprintf(("device %d: <%s> %sparent,%schildren,%s%s%s%s%s,%sivars,%ssoftc,busy=%d\n",
dev->unit, dev->desc,
(dev->parent? "":"no "),
(TAILQ_EMPTY(&dev->children)? "no ":""),
(dev->flags&DF_ENABLED? "enabled,":"disabled,"),
(dev->flags&DF_FIXEDCLASS? "fixed,":""),
(dev->flags&DF_WILDCARD? "wildcard,":""),
(dev->flags&DF_DESCMALLOCED? "descmalloced,":""),
(dev->flags&DF_REBID? "rebiddable,":""),
(dev->ivars? "":"no "),
(dev->softc? "":"no "),
dev->busy));
}
static void
print_device(device_t dev, int indent)
{
if (!dev)
return;
print_device_short(dev, indent);
indentprintf(("Parent:\n"));
print_device_short(dev->parent, indent+1);
indentprintf(("Driver:\n"));
print_driver_short(dev->driver, indent+1);
indentprintf(("Devclass:\n"));
print_devclass_short(dev->devclass, indent+1);
}
void
print_device_tree_short(device_t dev, int indent)
/* print the device and all its children (indented) */
{
device_t child;
if (!dev)
return;
print_device_short(dev, indent);
TAILQ_FOREACH(child, &dev->children, link) {
print_device_tree_short(child, indent+1);
}
}
void
print_device_tree(device_t dev, int indent)
/* print the device and all its children (indented) */
{
device_t child;
if (!dev)
return;
print_device(dev, indent);
TAILQ_FOREACH(child, &dev->children, link) {
print_device_tree(child, indent+1);
}
}
static void
print_driver_short(driver_t *driver, int indent)
{
if (!driver)
return;
2002-11-07 22:38:04 +00:00
indentprintf(("driver %s: softc size = %zd\n",
driver->name, driver->size));
}
static void
print_driver(driver_t *driver, int indent)
{
if (!driver)
return;
print_driver_short(driver, indent);
}
static void
print_driver_list(driver_list_t drivers, int indent)
{
driverlink_t driver;
TAILQ_FOREACH(driver, &drivers, link) {
print_driver(driver->driver, indent);
}
}
static void
print_devclass_short(devclass_t dc, int indent)
{
if ( !dc )
return;
indentprintf(("devclass %s: max units = %d\n", dc->name, dc->maxunit));
}
static void
print_devclass(devclass_t dc, int indent)
{
int i;
if ( !dc )
return;
print_devclass_short(dc, indent);
indentprintf(("Drivers:\n"));
print_driver_list(dc->drivers, indent+1);
indentprintf(("Devices:\n"));
for (i = 0; i < dc->maxunit; i++)
if (dc->devices[i])
print_device(dc->devices[i], indent+1);
}
void
print_devclass_list_short(void)
{
devclass_t dc;
printf("Short listing of devclasses, drivers & devices:\n");
TAILQ_FOREACH(dc, &devclasses, link) {
print_devclass_short(dc, 0);
}
}
void
print_devclass_list(void)
{
devclass_t dc;
printf("Full listing of devclasses, drivers & devices:\n");
TAILQ_FOREACH(dc, &devclasses, link) {
print_devclass(dc, 0);
}
}
#endif
/*
* User-space access to the device tree.
*
* We implement a small set of nodes:
*
* hw.bus Single integer read method to obtain the
* current generation count.
* hw.bus.devices Reads the entire device tree in flat space.
* hw.bus.rman Resource manager interface
*
* We might like to add the ability to scan devclasses and/or drivers to
* determine what else is currently loaded/available.
*/
static int
sysctl_bus(SYSCTL_HANDLER_ARGS)
{
struct u_businfo ubus;
ubus.ub_version = BUS_USER_VERSION;
ubus.ub_generation = bus_data_generation;
return (SYSCTL_OUT(req, &ubus, sizeof(ubus)));
}
SYSCTL_NODE(_hw_bus, OID_AUTO, info, CTLFLAG_RW, sysctl_bus,
"bus-related data");
static int
sysctl_devices(SYSCTL_HANDLER_ARGS)
{
int *name = (int *)arg1;
u_int namelen = arg2;
int index;
struct device *dev;
struct u_device udev; /* XXX this is a bit big */
int error;
if (namelen != 2)
return (EINVAL);
if (bus_data_generation_check(name[0]))
return (EINVAL);
index = name[1];
/*
* Scan the list of devices, looking for the requested index.
*/
TAILQ_FOREACH(dev, &bus_data_devices, devlink) {
if (index-- == 0)
break;
}
if (dev == NULL)
return (ENOENT);
/*
* Populate the return array.
*/
bzero(&udev, sizeof(udev));
udev.dv_handle = (uintptr_t)dev;
udev.dv_parent = (uintptr_t)dev->parent;
if (dev->nameunit != NULL)
strlcpy(udev.dv_name, dev->nameunit, sizeof(udev.dv_name));
if (dev->desc != NULL)
strlcpy(udev.dv_desc, dev->desc, sizeof(udev.dv_desc));
if (dev->driver != NULL && dev->driver->name != NULL)
strlcpy(udev.dv_drivername, dev->driver->name,
sizeof(udev.dv_drivername));
bus_child_pnpinfo_str(dev, udev.dv_pnpinfo, sizeof(udev.dv_pnpinfo));
bus_child_location_str(dev, udev.dv_location, sizeof(udev.dv_location));
udev.dv_devflags = dev->devflags;
udev.dv_flags = dev->flags;
udev.dv_state = dev->state;
error = SYSCTL_OUT(req, &udev, sizeof(udev));
return (error);
}
SYSCTL_NODE(_hw_bus, OID_AUTO, devices, CTLFLAG_RD, sysctl_devices,
"system device tree");
int
bus_data_generation_check(int generation)
{
if (generation != bus_data_generation)
return (1);
/* XXX generate optimised lists here? */
return (0);
}
void
bus_data_generation_update(void)
{
bus_data_generation++;
}
int
bus_free_resource(device_t dev, int type, struct resource *r)
{
if (r == NULL)
return (0);
return (bus_release_resource(dev, type, rman_get_rid(r), r));
}