1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
freebsd/sys/pci/if_wxreg.h

466 lines
15 KiB
C
Raw Normal View History

/* $FreeBSD$ */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Principal Author: Matthew Jacob
* Copyright (c) 1999, 2001 by Traakan Software
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Additional Copyright (c) 2001 by Parag Patel
* under same licence for MII PHY code.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
#define WX_VENDOR_INTEL 0x8086
#define WX_PRODUCT_82452 0x1000
#define WX_PRODUCT_LIVENGOOD 0x1001
#define WX_PRODUCT_82452_SC 0x1003
#define WX_PRODUCT_82543 0x1004
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WX_MMBA 0x10
#define MWI 0x10 /* Memory Write Invalidate */
#define WX_CACHELINE_SIZE 0x20
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/* Join PCI ID and revision into one value */
#define WX_WISEMAN_0 0x10000000
#define WX_WISEMAN_2_0 0x10000002
#define WX_WISEMAN_2_1 0x10000003
#define WX_LIVENGOOD 0x10010000
#define WX_LIVENGOOD_CU 0x10040002
#define IS_WISEMAN(sc) ((sc)->wx_idnrev < WX_LIVENGOOD)
#define IS_LIVENGOOD(sc) ((sc)->wx_idnrev >= WX_LIVENGOOD)
#define IS_LIVENGOOD_CU(sc) ((sc)->wx_idnrev == WX_LIVENGOOD_CU)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Information about this chipset gathered from a released Intel Linux driver,
* which was clearly a port of an NT driver.
*/
/*
* Various Descriptor Structures.
* These are all in little endian format (for now).
*/
typedef struct {
u_int32_t lowpart;
u_int32_t highpart;
} wxpa_t, wxrp_t;
/*
* Receive Descriptor.
* The base address of a receive descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address; /* physical address of buffer */
u_int16_t length;
u_int16_t csum;
u_int8_t status;
u_int8_t errors;
u_int16_t special;
} wxrd_t;
#define RDSTAT_DD 0x1 /* descriptor done */
#define RDSTAT_EOP 0x2 /* end of packet */
#define RDSTAT_RSVD 0x74 /* reserved bits */
#define RDERR_CRC 0x1 /* CRC Error */
#define RDERR_SE 0x2 /* Symbol Error */
#define RDERR_SEQ 0x4 /* Sequence Error */
/*
* Transmit Descriptor
* The base address of a transmit descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address;
u_int16_t length;
u_int8_t cso; /* checksum offset */
u_int8_t cmd; /* cmd */
u_int8_t status; /* status */
u_int8_t css; /* checksum start */
u_int16_t special;
} wxtd_t;
#define TXCMD_EOP 0x1 /* last packet */
#define TXCMD_IFCS 0x2 /* insert FCS */
#define TXCMD_IC 0x4 /* insert checksum */
#define TXCMD_RS 0x8 /* report status */
#define TXCMD_RPS 0x10 /* report packet sent */
#define TXCMD_SM 0x20 /* symbol mode */
#define TXCMD_IDE 0x80 /* interrupt delay enable */
#define TXSTS_DD 0x1 /* descriptor done */
#define TXSTS_EC 0x2 /* excess collisions */
#define TXSTS_LC 0x4 /* late collision */
/*
* This device can only be accessed via memory space.
*/
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Register access via offsets.
*
* Our brilliant friends at Intel decided to move registers offsets
* around from chip version to chip version. It's amazing that some
* deity doesn't zap these suckers. Really.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
#define WXREG_DCR 0x00000000
#define WXREG_DSR 0x00000008
#define WXREG_EECDR 0x00000010
#define WXREG_EXCT 0x00000018
#define WXREG_MDIC 0x00000020
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_FCAL 0x00000028
#define WXREG_FCAH 0x0000002C
#define WXREG_FCT 0x00000030
#define WXREG_VET 0x00000038
#define WXREG_RAL_BASE 0x00000040
#define WXREG_RAL_LO(x) (WXREG_RAL_BASE + ((x) << 3))
#define WXREG_RAL_HI(x) (WXREG_RAL_LO(x) + 4)
#define WXREG_ICR 0x000000c0
#define WXREG_ICS 0x000000c8
#define WXREG_IMASK 0x000000d0
#define WXREG_IMCLR 0x000000d8
#define WXREG_RCTL 0x00000100
#define WXREG_RDTR0 0x00000108
#define WXREG_RDTR0_LIVENGOOD 0x00002820
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDBA0_LO 0x00000110
#define WXREG_RDBA0_LO_LIVENGOOD 0x00002800
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDBA0_HI 0x00000114
#define WXREG_RDBA0_HI_LIVENGOOD 0x00002804
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDLEN0 0x00000118
#define WXREG_RDLEN0_LIVENGOOD 0x00002808
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDH0 0x00000120
#define WXREG_RDH0_LIVENGOOD 0x00002810
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDT0 0x00000128
#define WXREG_RDT0_LIVENGOOD 0x00002818
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_RDTR1 0x00000130
#define WXREG_RDBA1_LO 0x00000138
#define WXREG_RDBA1_HI 0x0000013C
#define WXREG_RDLEN1 0x00000140
#define WXREG_RDH1 0x00000148
#define WXREG_RDT1 0x00000150
#define WXREG_FLOW_RCV_HI 0x00000160
#define WXREG_FLOW_RCV_HI_LIVENGOOD 0x00002168
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_FLOW_RCV_LO 0x00000168
#define WXREG_FLOW_RCV_LO_LIVENGOOD 0x00002160
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_FLOW_XTIMER 0x00000170
#define WXREG_XMIT_CFGW 0x00000178
#define WXREG_RECV_CFGW 0x00000180
#define WXREG_MTA 0x00000200
#define WXREG_TCTL 0x00000400
#define WXREG_TQSA_LO 0x00000408
#define WXREG_TQSA_HI 0x0000040C
#define WXREG_TIPG 0x00000410
#define WXREG_TQC 0x00000418
#define WXREG_TDBA_LO 0x00000420
#define WXREG_TDBA_LO_LIVENGOOD 0x00003800
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_TDBA_HI 0x00000424
#define WXREG_TDBA_HI_LIVENGOOD 0x00003804
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_TDLEN 0x00000428
#define WXREG_TDLEN_LIVENGOOD 0x00003808
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_TDH 0x00000430
#define WXREG_TDH_LIVENGOOD 0x00003810
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_TDT 0x00000438
#define WXREG_TDT_LIVENGOOD 0x00003818
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_TIDV 0x00000440
#define WXREG_TIDV_LIVENGOOD 0x00003820
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXREG_VFTA 0x00000600
#define WX_RAL_TAB_SIZE 16
#define WX_RAL_AV 0x80000000
#define WX_MC_TAB_SIZE 128
#define WX_VLAN_TAB_SIZE 128
/*
* Device Control Register Defines
*/
#define WXDCR_FD 0x1 /* full duplex */
#define WXDCR_BEM 0x2 /* big endian mode */
#define WXDCR_FAIR 0x4 /* 1->Fairness, 0->Receive Priority */
#define WXDCR_LRST 0x8 /* Link Reset */
#define WXDCR_ASDE 0x20 /* ??? */
#define WXDCR_SLE 0x20 /* ??? */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXDCR_SLU 0x40 /* Set Link Up */
#define WXDCR_ILOS 0x80 /* Invert Loss-of-Signal */
#define WXDCR_10BT 0x000 /* set 10BaseT */
#define WXDCR_100BT 0x100 /* LIVENGOOD: Set 100BaseT */
#define WXDCR_1000BT 0x200 /* LIVENGOOD: Set 1000BaseT */
#define WXDCR_SPEED_MASK 0x300
#define WXDCR_BEM32 0x400 /* LIVENGOOD: Set Big Endian 32 (?) */
#define WXDCR_FRCSPD 0x800 /* LIVENGOOD: Force Speed (?) */
#define WXDCR_FRCDPX 0x1000 /* LIVENGOOD: Force Full Duplex */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* General purpose I/O pins
*
* Pin 0 is for the LED.
*
* Pin 1 is to detect loss of signal (LOS)- if it is set, we've lost signal.
*/
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXDCR_SWDPINS_SHIFT 18
#define WXDCR_SWDPINS_MASK 0xf
#define WXDCR_SWDPIN0 (1 << 18) /* 0x00040000 - PHY reset */
#define WXDCR_SWDPIN1 (1 << 19) /* 0x00080000 */
#define WXDCR_SWDPIN2 (1 << 20) /* 0x00100000 - PHY data */
#define WXDCR_SWDPIN3 (1 << 21) /* 0x00200000 - PHY clk */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXDCR_SWDPIO_SHIFT 22
#define WXDCR_SWDPIO_MASK 0xf
#define WXDCR_SWDPIO0 (1 << 22) /* 0x00400000 - PHY rst dir */
#define WXDCR_SWDPIO1 (1 << 23) /* 0x00800000 */
#define WXDCR_SWDPIO2 (1 << 24) /* 0x01000000 - PHY data dir */
#define WXDCR_SWDPIO3 (1 << 25) /* 0x02000000 - PHY clk dir */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXDCR_RST 0x04000000 /* Device Reset (self clearing) */
#define WXDCR_RFCE 0x08000000 /* Receive Flow Control Enable */
#define WXDCR_TFCE 0x10000000 /* Transmit Flow Control Enable */
#define WXDCR_RTE 0x20000000 /* Routing Tag Enable */
#define WXDCR_VME 0x40000000 /* VLAN Mode Enable */
/*
* Device Status Register Defines
*/
#define WXDSR_FD 0x1 /* full duplex */
#define WXDSR_LU 0x2 /* link up */
#define WXDSR_TXCLK 0x4 /* transmit clock running */
#define WXDSR_RBCLK 0x8 /* receive clock running */
#define WXDSR_TXOFF 0x10 /* transmit paused */
#define WXDSR_TBIMODE 0x20 /* LIVENGOOD: Fibre Mode */
#define WXDSR_100BT 0x40 /* LIVENGOOD: 100BaseT */
#define WXDSR_1000BT 0x80 /* LIVENGOOD: 1000BaseT */
#define WXDSR_ASDV 0x300 /* LIVENGOOD: ?? */
#define WXDSR_MTXCKOK 0x400 /* LIVENGOOD: ?? */
#define WXDSR_PCI66 0x800 /* LIVENGOOD: 66 MHz bus */
#define WXDSR_BUS64 0x1000 /* LIVENGOOD: In 64 bit slot */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* EEPROM Register Defines
*/
#define WXEECD_SK 0x1 /* enable clock */
#define WXEECD_CS 0x2 /* chip select */
#define WXEECD_DI 0x4 /* data input */
#define WXEECD_DO 0x8 /* data output */
#define EEPROM_READ_OPCODE 0x6
/*
* Constant Flow Control Frame MAC Address and Type values.
*/
#define FC_FRM_CONST_LO 0x00C28001
#define FC_FRM_CONST_HI 0x0100
#define FC_TYP_CONST 0x8808
/*
* Bits pertinent for the Receive Address register pairs. The low address
* is the low 32 bits of a 48 bit MAC address. The high address contains
* bits 32-47 of the 48 bit MAC address. The top bit in the high address
* is a 'valid' bit.
*/
#define WXRAH_RDR1 0x40000000 /* second receive descriptor ring */
#define WXRAH_VALID 0x80000000
/*
* Interrupt Cause Bits
*/
#define WXISR_TXDW 0x1 /* transmit descriptor written back */
#define WXISR_TXQE 0x2 /* transmit queue empty */
#define WXISR_LSC 0x4 /* link status change */
#define WXISR_RXSEQ 0x8 /* receive sequence error */
#define WXISR_RXDMT0 0x10 /* receiver ring 0 getting empty */
#define WXISR_RXDMT1 0x20 /* receiver ring 1 getting empty */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXISR_RXO 0x40 /* receiver overrun */
#define WXISR_RXT0 0x80 /* ring 0 receiver timer interrupt */
#define WXISR_RXT1 0x100 /* ring 1 receiver timer interrupt */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXISR_PCIE 0x200 /* ?? Probably PCI interface error... */
#define WXISR_MDIAC 0x200
#define WXISR_RXCFG 0x400
#define WXISR_GPI_EN0 0x800
#define WXISR_GPI_EN1 0x1000 /* appears to be PHY intr line */
#define WXISR_GPI_EN2 0x2000
#define WXISR_GPI_EN3 0x4000
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXIENABLE_DEFAULT \
(WXISR_RXO | WXISR_RXT0 | WXISR_RXDMT0 | WXISR_RXSEQ | \
WXISR_LSC | WXISR_PCIE | WXISR_GPI_EN1)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXDISABLE 0xffffffff
/*
* Receive Control Register bits.
*/
#define WXRCTL_RST 0x1 /* receiver reset */
#define WXRCTL_EN 0x2 /* receiver enable */
#define WXRCTL_SBP 0x4 /* store bad packets */
#define WXRCTL_UPE 0x8 /* unicast promiscuos mode */
#define WXRCTL_MPE 0x10 /* multicast promiscuous mode */
#define WXRCTL_LPE 0x20 /* large packet enable */
#define WXRCTL_BAM 0x8000 /* broadcast accept mode */
#define WXRCTL_BSEX 0x2000000 /* LIVENGOOD: Buffer Size Extension */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXRCTL_2KRBUF (0 << 16) /* 2KB Receive Buffers */
#define WXRCTL_1KRBUF (1 << 16) /* 1KB Receive Buffers */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WXRCTL_512BRBUF (2 << 16) /* 512 Byte Receive Buffers */
#define WXRCTL_256BRBUF (3 << 16) /* 256 Byte Receive Buffers */
#define WXRCTL_4KRBUF (3 << 16) /* LIVENGOOD: 4KB Receive Buffers */
#define WXRCTL_8KRBUF (2 << 16) /* LIVENGOOD: 8KB Receive Buffers */
#define WXRCTL_16KRBUF (1 << 16) /* LIVENGOOD: 16KB Receive Buffers */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Receive Delay Timer Register bits.
*/
#define WXRDTR_FPD 0x80000000 /* flush partial descriptor */
/*
* Transmit Configuration Word defines
*/
#define WXTXCW_FD 0x00000020 /* Full Duplex */
#define WXTXCW_PMASK 0x00000180 /* pause mask */
#define WXTXCW_ANE 0x80000000 /* AutoNegotiate */
#define WXTXCW_DEFAULT 0x800001A0
/*
* Transmit Control Register defines.
*/
#define WXTCTL_RST 0x1 /* transmitter reset */
#define WXTCTL_EN 0x2 /* transmitter enable */
#define WXTCTL_PSP 0x8 /* pad short packets */
#define WXTCTL_CT(x) (((x) & 0xff) << 4) /* 4:11 - Collision Threshold */
#define WXTCTL_COLD(x) (((x) & 0x3ff) << 12) /* 12:21 - Collision Distance */
#define WXTCTL_SWXOFF (1 << 22) /* Software XOFF */
#define WX_COLLISION_THRESHOLD 15
#define WX_FDX_COLLISION_DX 64
#define WX_HDX_COLLISION_DX 512
/*
* MDI control register bits - (best-guess)
*/
#define WXMDIC_WRITE 0x04000000
#define WXMDIC_READ 0x08000000
#define WXMDIC_READY 0x10000000
#define WXMDIC_INTR 0x20000000
#define WXMDIC_ERR 0x40000000
#define WXMDIC_REGADDR_MASK 0x001F0000
#define WXMDIC_REGADDR_SHIFT 16
#define WXMDIC_PHYADDR_MASK 0x03E00000
#define WXMDIC_PHYADDR_SHIFT 21
#define WXMDIC_DATA_MASK 0x0000FFFF
/*
* EXCT control register bits
*/
#define WXEXCT_GPI_EN0 0x00000001
#define WXEXCT_GPI_EN1 0x00000002
#define WXEXCT_GPI_EN2 0x00000004
#define WXEXCT_GPI_EN3 0x00000008
#define WXEXCT_SWDPIN4 0x00000010
#define WXEXCT_SWDPIN5 0x00000020
#define WXEXCT_SWDPIN6 0x00000040
#define WXEXCT_SWDPIN7 0x00000080
#define WXEXCT_SWDPIO4 0x00000100
#define WXEXCT_SWDPIO5 0x00000200
#define WXEXCT_SWDPIO6 0x00000400
#define WXEXCT_SWDPIO7 0x00000800
#define WXEXCT_ASDCHK 0x00001000
#define WXEXCT_EE_RST 0x00002000
#define WXEXCT_IPS 0x00004000
#define WXEXCT_SPD_BYPS 0x00008000
/*
* PHY access using GPIO pins
*/
#define WXPHY_RESET_DIR WXDCR_SWDPIO0
#define WXPHY_RESET WXDCR_SWDPIN0
#define WXPHY_MDIO_DIR WXDCR_SWDPIO2
#define WXPHY_MDIO WXDCR_SWDPIN2
#define WXPHY_MDC_DIR WXDCR_SWDPIO3
#define WXPHY_MDC WXDCR_SWDPIN3
#define WXPHY_RESET_DIR4 WXEXCT_SWDPIO4
#define WXPHY_RESET4 WXEXCT_SWDPIN4
/*
* PHY commands
*/
#define WXPHYC_PREAMBLE 0xFFFFFFFF
#define WXPHYC_PREAMBLE_LEN 32
#define WXPHYC_SOF 0x01
#define WXPHYC_READ 0x02
#define WXPHYC_WRITE 0x01
#define WXPHYC_TURNAROUND 0x02
/*
* Receive Configuration Word defines
*/
#define WXRXCW_CWMASK 0x0000ffff
#define WXRXCW_NC 0x04000000
#define WXRXCW_IV 0x08000000
#define WXRXCW_CC 0x10000000
#define WXRXCW_C 0x20000000
#define WXRXCW_SYNCH 0x40000000
#define WXRXCW_ANC 0x80000000
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Miscellaneous
*/
#define WX_EEPROM_MAC_OFF 0
/*
* Offset for Initialization Control Word #1
*/
#define WX_EEPROM_CTLR1_OFF 0xA
#define WX_EEPROM_CTLR1_FD (1 << 10)
#define WX_EEPROM_CTLR1_SWDPIO_SHIFT 5
#define WX_EEPROM_CTLR1_ILOS (1 << 4)
#define WX_EEPROM_CTLR2_OFF 0xF
#define WX_EEPROM_CTLR2_SWDPIO 0xF0
#define WX_EEPROM_EXT_SHIFT 4
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WX_XTIMER_DFLT 0x100
#define WX_RCV_FLOW_HI_DFLT 0x8000
#define WX_RCV_FLOW_LO_DFLT 0x4000
#define WX_WISEMAN_TIPG_DFLT (10 | (2 << 10) | (10 << 20))
#define WX_LIVENGOOD_TIPG_DFLT (6 | (8 << 10) | (6 << 20))
#define WX_LIVENGOOD_CU_TIPG_DFLT (8 | (8 << 10) | (6 << 20))
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WX_CRC_LENGTH 4
/*
* Hardware cannot transmit less than 16 bytes. It also cannot
* successfully receive less than 60 bytes.
*/
#define WX_MIN_XPKT_SIZE 16
#define WX_MIN_RPKT_SIZE 60
#define WX_MAX_PKT_SIZE 1514
2000-01-25 04:11:33 +00:00
#define WX_MAX_PKT_SIZE_JUMBO 9014