mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
Code Issues Releases Activity
6dfb2a5169
freebsd/sys/conf/files.alpha

179 lines
6.5 KiB
Plaintext
Raw Normal View History

Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
font8x16.o optional std8x16font \
compile-with "uudecode < /usr/share/syscons/fonts/${STD8X16FONT}-8x16.fnt && file2c 'unsigned char font_16[16*256] = {' '};' < ${STD8X16FONT}-8x16 > font8x16.c && ${CC} -c ${CFLAGS} font8x16.c" \
no-implicit-rule before-depend \
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
clean "${STD8X16FONT}-8x16 font8x16.c"
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
#
atkbdmap.h optional atkbd_dflt_keymap \
compile-with "kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "atkbdmap.h"
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
alpha/alpha/autoconf.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/cpuconf.c standard
Add atomic.s.
1998-08-24 08:48:22 +00:00
alpha/alpha/atomic.s standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/dec_kn8ae.c optional dec_kn8ae
Add some bits and pieces for my test box.
1998-07-12 16:26:52 +00:00
alpha/alpha/dec_eb164.c optional dec_eb164
Added support for the DEC EB64PLUS systype. (Part III) o Add the EB64PLUS systype into the kernel configuration files and add it to the GENERIC kernel o Correct mcclock_isa.c's dependence on cia, it should depend on isa. This will allow avanti and eb64+ kernels to be built without the cia chipset support code.
1999-01-18 20:26:50 +00:00
alpha/alpha/dec_eb64plus.c optional dec_eb64plus
Add KN20AA support. Add entries for syscons.
1998-07-22 08:24:39 +00:00
alpha/alpha/dec_kn20aa.c optional dec_kn20aa
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/alpha/dec_2100_a50.c optional dec_2100_a50
alpha/alpha/dec_st550.c optional dec_st550
Add support for the DEC_ST6600 family of alphas. This includes the Compaq XP1000, AlphaServer DS20, AlphaServer DS10, and DP264 This has been tested *only* on XP1000's. I'll be interested to hear from owners of other types of DEC_ST6600 alphas. I'd like to thank Don Rice of Compaq for providing the documentation required to support this platform on FreeBSD. I'd also like to thank Doug Rabson for newbus, and for helping me get a multiple hoses working with newbus. Reviewed by: Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:22:14 +00:00
alpha/alpha/dec_st6600.c optional dec_st6600
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/alpha/dec_axppci_33.c optional dec_axppci_33
Add support for TurboChannel alphas (DEC 3000/300 and 3000/500). Obtained from: NetBSD Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-08-20 08:27:11 +00:00
alpha/alpha/dec_3000_300.c optional dec_3000_300
alpha/alpha/dec_3000_500.c optional dec_3000_500
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/mountroot.c optional slice
alpha/alpha/ipl_funcs.c standard
alpha/alpha/pal.s standard
Change to cam.
1998-09-16 08:22:09 +00:00
alpha/alpha/busdma_machdep.c standard
* Implement ISA dma (only for CIA now but more chipsets to follow). * Port the fd driver to alpha.
1999-06-05 13:30:13 +00:00
alpha/alpha/sgmap.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/prom.c standard
Add some bits and pieces for my test box.
1998-07-12 16:26:52 +00:00
alpha/alpha/promcons.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/prom_disp.s standard
Add some bits and pieces for my test box.
1998-07-12 16:26:52 +00:00
alpha/alpha/alpha-gdbstub.c optional ddb
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/db_disasm.c optional ddb
alpha/alpha/db_interface.c optional ddb
alpha/alpha/db_trace.c optional ddb
alpha/alpha/exception.s standard
alpha/alpha/in_cksum.c optional inet
# locore.s needs to be handled in Makefile to put it first. Otherwise it's
# now normal.
# alpha/alpha/locore.s standard
alpha/alpha/machdep.c standard
Implement 'software completion' for floating point arithmetic. On the alpha, operations involving non-finite numbers or denormalised numbers or operations which should generate such numbers will cause an arithmetic exception. For programs which follow some strict code generation rules, the kernel trap handler can then 'complete' the operation by emulating the faulting instruction. To use software completion, a program must be compiled with the arguments '-mtrap-precision=i' and '-mfp-trap-mode=su' or '-mfp-trap-mode=sui'. Programs compiled in this way can use non-finite and denormalised numbers at the expense of slightly less efficient code generation of floating point instructions. Programs not compiled with these options will receive a SIGFPE signal when non-finite or denormalised numbers are used or generated. Reviewed by: John Polstra <jdp@polstra.com>
1998-12-04 10:52:48 +00:00
alpha/alpha/fp_emulate.c standard
alpha/alpha/ieee_float.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/mem.c standard
alpha/alpha/mp_machdep.c optional smp
alpha/alpha/perfmon.c optional perfmon profiling-routine
alpha/alpha/perfmon.c optional perfmon
alpha/alpha/pmap.c standard
alpha/alpha/procfs_machdep.c standard
alpha/alpha/simplelock.s optional smp
alpha/alpha/support.s standard
alpha/alpha/swtch.s standard
alpha/alpha/sys_machdep.c standard
alpha/alpha/trap.c standard
alpha/alpha/interrupt.c standard
alpha/alpha/userconfig.c optional userconfig
alpha/alpha/vm_machdep.c standard
alpha/alpha/clock.c standard
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
clock_if.o standard \
dependency "clock_if.c" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
clock_if.c standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/alpha/alpha/clock_if.m" \
compile-with "perl $S/kern/makedevops.pl -c $S/alpha/alpha/clock_if.m" \
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
no-obj no-implicit-rule before-depend local \
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
clean "clock_if.c"
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
clock_if.h standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/alpha/alpha/clock_if.m" \
compile-with "perl $S/kern/makedevops.pl -h $S/alpha/alpha/clock_if.m" \
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
no-obj no-implicit-rule before-depend \
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
clean "clock_if.h"
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/tlsb/tlsb.c optional tlsb
alpha/tlsb/gbus.c optional gbus
alpha/tlsb/kftxx.c optional kft
alpha/tlsb/mcclock_tlsb.c optional gbus
alpha/tlsb/zs_tlsb.c optional gbus
alpha/tlsb/dwlpx.c optional dwlpx
Add support for TurboChannel alphas (DEC 3000/300 and 3000/500). Obtained from: NetBSD Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-08-20 08:27:11 +00:00
alpha/tc/tcasic.c optional tcasic
alpha/tc/tc.c optional tc
alpha/tc/ioasic.c optional tc
alpha/tc/mcclock_ioasic.c optional tc
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
alpha/tc/if_le_ioasic.c optional le
alpha/tc/if_le_dec.c optional le
alpha/tc/am7990.c optional le
alpha/tc/tcds.c optional tcds
alpha/tc/tcds_dma.c optional tcds
alpha/tc/esp.c optional esp
dev/dec/mcclock.c optional mcclock
Adjust mcclock lines to avoid config(8) warning.
1999-06-19 13:12:51 +00:00
mcclock_if.o optional mcclock \
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
dependency "mcclock_if.c" \
compile-with "${NORMAL_C}" \
no-implicit-rule local
mcclock_if.c standard \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/dec/mcclock_if.m" \
compile-with "perl $S/kern/makedevops.pl -c $S/dev/dec/mcclock_if.m" \
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
no-obj no-implicit-rule before-depend local \
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
clean "mcclock_if.c"
Adjust mcclock lines to avoid config(8) warning.
1999-06-19 13:12:51 +00:00
mcclock_if.h optional mcclock \
Update configuration files for the perl based makedevops script. Submitted by: Nick Hibma <nick.hibma@jrc.it> Approved by: Doug Rabson <dfr@nlsystems.com>
1998-11-08 18:39:57 +00:00
dependency "$S/kern/makedevops.pl $S/dev/dec/mcclock_if.m" \
compile-with "perl $S/kern/makedevops.pl -h $S/dev/dec/mcclock_if.m" \
Device framework code now declared in MI code.
1998-09-07 07:29:30 +00:00
no-obj no-implicit-rule before-depend \
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
clean "mcclock_if.h"
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
alpha/alpha/elf_machdep.c standard
alpha/isa/isa.c optional isa
alpha/isa/isa_dma.c optional isa
alpha/isa/mcclock_isa.c optional isa
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/pci/apecs.c optional apecs
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
alpha/pci/apecs_pci.c optional apecs
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
alpha/pci/cia.c optional cia
alpha/pci/cia_pci.c optional cia
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/pci/lca.c optional lca
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
alpha/pci/lca_pci.c optional lca
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
alpha/pci/pci_eb164_intr.s optional cia
alpha/pci/pci_eb64plus_intr.s optional apecs
alpha/pci/pcibus.c optional pci
Add support for the DEC_ST6600 family of alphas. This includes the Compaq XP1000, AlphaServer DS20, AlphaServer DS10, and DP264 This has been tested *only* on XP1000's. I'll be interested to hear from owners of other types of DEC_ST6600 alphas. I'd like to thank Don Rice of Compaq for providing the documentation required to support this platform on FreeBSD. I'd also like to thank Doug Rabson for newbus, and for helping me get a multiple hoses working with newbus. Reviewed by: Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:22:14 +00:00
alpha/pci/tsunami.c optional tsunami
alpha/pci/tsunami_pci.c optional tsunami
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/ata/ata-all.c optional ata
dev/ata/ata-disk.c optional atadisk
dev/ata/ata-dma.c optional ata
dev/ata/atapi-all.c optional ata
dev/ata/atapi-cd.c optional atapicd
dev/ata/atapi-fd.c optional atapifd
dev/ata/atapi-tape.c optional atapist
dev/fb/fb.c optional fb
dev/fb/fb.c optional vga
dev/fb/splash.c optional splash
dev/fb/vga.c optional vga
dev/kbd/atkbd.c optional atkbd
dev/kbd/atkbdc.c optional atkbdc
dev/kbd/kbd.c optional atkbd
dev/kbd/kbd.c optional kbd
dev/kbd/kbd.c optional ukbd
dev/syscons/schistory.c optional sc
dev/syscons/scmouse.c optional sc
dev/syscons/scvgarndr.c optional sc
dev/syscons/scvidctl.c optional sc
dev/syscons/scvtb.c optional sc
dev/syscons/syscons.c optional sc
isa/atkbd_isa.c optional atkbd
isa/atkbdc_isa.c optional atkbdc
isa/fd.c optional fd
isa/psm.c optional psm
isa/syscons_isa.c optional sc
isa/vga_isa.c optional vga
Merge alpha and pc98 changes into i386 MBR handling code and replace all three copies with one copy in MI land.
1999-08-29 09:12:54 +00:00
kern/subr_diskmbr.c standard
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
libkern/alpha/htonl.S standard
libkern/alpha/htons.S standard
libkern/alpha/ntohl.S standard
libkern/alpha/ntohs.S standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
libkern/bcd.c standard
libkern/bcmp.c standard
libkern/ffs.c standard
libkern/index.c standard
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
libkern/inet_ntoa.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
libkern/mcount.c optional profiling-routine
libkern/qsort.c standard
libkern/random.c standard
Make kernel build on alpha again. New kld stuff needs rindex.
1998-10-10 18:32:18 +00:00
libkern/rindex.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
libkern/scanc.c standard
libkern/skpc.c standard
libkern/strcat.c standard
libkern/strcmp.c standard
libkern/strcpy.c standard
libkern/strlen.c standard
libkern/strncmp.c standard
libkern/strncpy.c standard
Reference in New Issue Copy Permalink