1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-26 11:47:31 +00:00
freebsd/sys/kern/kern_resource.c

1030 lines
23 KiB
C
Raw Normal View History

1994-05-24 10:09:53 +00:00
/*-
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_resource.c 8.5 (Berkeley) 1/21/94
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
#include "opt_compat.h"
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysproto.h>
1994-05-24 10:09:53 +00:00
#include <sys/file.h>
#include <sys/kernel.h>
#include <sys/lock.h>
1994-05-24 10:09:53 +00:00
#include <sys/malloc.h>
#include <sys/mutex.h>
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/sx.h>
#include <sys/sysent.h>
#include <sys/time.h>
1994-05-24 10:09:53 +00:00
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
1994-05-24 10:09:53 +00:00
static int donice(struct thread *td, struct proc *chgp, int n);
static MALLOC_DEFINE(M_UIDINFO, "uidinfo", "uidinfo structures");
#define UIHASH(uid) (&uihashtbl[(uid) & uihash])
static struct mtx uihashtbl_mtx;
static LIST_HEAD(uihashhead, uidinfo) *uihashtbl;
static u_long uihash; /* size of hash table - 1 */
2002-03-19 21:25:46 +00:00
static struct uidinfo *uilookup(uid_t uid);
1994-05-24 10:09:53 +00:00
/*
* Resource controls and accounting.
*/
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct getpriority_args {
int which;
int who;
};
#endif
/*
* MPSAFE
*/
int
getpriority(td, uap)
struct thread *td;
1994-05-24 10:09:53 +00:00
register struct getpriority_args *uap;
{
struct proc *p;
int low = PRIO_MAX + 1;
int error = 0;
struct ksegrp *kg;
1994-05-24 10:09:53 +00:00
switch (uap->which) {
1994-05-24 10:09:53 +00:00
case PRIO_PROCESS:
if (uap->who == 0)
low = td->td_ksegrp->kg_nice;
else {
1994-05-24 10:09:53 +00:00
p = pfind(uap->who);
if (p == NULL)
break;
if (p_cansee(td, p) == 0) {
FOREACH_KSEGRP_IN_PROC(p, kg) {
if (kg->kg_nice < low)
low = kg->kg_nice;
}
}
PROC_UNLOCK(p);
}
1994-05-24 10:09:53 +00:00
break;
case PRIO_PGRP: {
register struct pgrp *pg;
sx_slock(&proctree_lock);
if (uap->who == 0) {
pg = td->td_proc->p_pgrp;
PGRP_LOCK(pg);
} else {
pg = pgfind(uap->who);
if (pg == NULL) {
sx_sunlock(&proctree_lock);
break;
}
}
sx_sunlock(&proctree_lock);
LIST_FOREACH(p, &pg->pg_members, p_pglist) {
PROC_LOCK(p);
if (!p_cansee(td, p)) {
FOREACH_KSEGRP_IN_PROC(p, kg) {
if (kg->kg_nice < low)
low = kg->kg_nice;
}
}
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
}
PGRP_UNLOCK(pg);
1994-05-24 10:09:53 +00:00
break;
}
case PRIO_USER:
if (uap->who == 0)
uap->who = td->td_ucred->cr_uid;
sx_slock(&allproc_lock);
LIST_FOREACH(p, &allproc, p_list) {
PROC_LOCK(p);
if (!p_cansee(td, p) &&
p->p_ucred->cr_uid == uap->who) {
FOREACH_KSEGRP_IN_PROC(p, kg) {
if (kg->kg_nice < low)
low = kg->kg_nice;
}
}
PROC_UNLOCK(p);
}
sx_sunlock(&allproc_lock);
1994-05-24 10:09:53 +00:00
break;
default:
error = EINVAL;
break;
1994-05-24 10:09:53 +00:00
}
if (low == PRIO_MAX + 1 && error == 0)
error = ESRCH;
td->td_retval[0] = low;
return (error);
1994-05-24 10:09:53 +00:00
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct setpriority_args {
int which;
int who;
int prio;
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
setpriority(td, uap)
struct thread *td;
1994-05-24 10:09:53 +00:00
register struct setpriority_args *uap;
{
struct proc *curp = td->td_proc;
1994-05-24 10:09:53 +00:00
register struct proc *p;
int found = 0, error = 0;
switch (uap->which) {
1994-05-24 10:09:53 +00:00
case PRIO_PROCESS:
if (uap->who == 0) {
PROC_LOCK(curp);
error = donice(td, curp, uap->prio);
PROC_UNLOCK(curp);
} else {
1994-05-24 10:09:53 +00:00
p = pfind(uap->who);
if (p == 0)
break;
if (p_cansee(td, p) == 0)
error = donice(td, p, uap->prio);
PROC_UNLOCK(p);
}
1994-05-24 10:09:53 +00:00
found++;
break;
case PRIO_PGRP: {
register struct pgrp *pg;
1995-05-30 08:16:23 +00:00
sx_slock(&proctree_lock);
if (uap->who == 0) {
1994-05-24 10:09:53 +00:00
pg = curp->p_pgrp;
PGRP_LOCK(pg);
} else {
pg = pgfind(uap->who);
if (pg == NULL) {
sx_sunlock(&proctree_lock);
break;
}
}
sx_sunlock(&proctree_lock);
LIST_FOREACH(p, &pg->pg_members, p_pglist) {
PROC_LOCK(p);
if (!p_cansee(td, p)) {
error = donice(td, p, uap->prio);
found++;
}
PROC_UNLOCK(p);
1994-05-24 10:09:53 +00:00
}
PGRP_UNLOCK(pg);
1994-05-24 10:09:53 +00:00
break;
}
case PRIO_USER:
if (uap->who == 0)
uap->who = td->td_ucred->cr_uid;
sx_slock(&allproc_lock);
FOREACH_PROC_IN_SYSTEM(p) {
PROC_LOCK(p);
if (p->p_ucred->cr_uid == uap->who &&
!p_cansee(td, p)) {
error = donice(td, p, uap->prio);
1994-05-24 10:09:53 +00:00
found++;
}
PROC_UNLOCK(p);
}
sx_sunlock(&allproc_lock);
1994-05-24 10:09:53 +00:00
break;
default:
error = EINVAL;
break;
1994-05-24 10:09:53 +00:00
}
if (found == 0 && error == 0)
error = ESRCH;
1994-05-24 10:09:53 +00:00
return (error);
}
/*
* Set "nice" for a process. Doesn't really understand threaded processes well
* but does try. Has the unfortunate side effect of making all the NICE
* values for a process's ksegrps the same.. This suggests that
* NICE valuse should be stored as a process nice and deltas for the ksegrps.
* (but not yet).
*/
1998-02-09 06:11:36 +00:00
static int
donice(struct thread *td, struct proc *p, int n)
1994-05-24 10:09:53 +00:00
{
o Centralize inter-process access control, introducing: int p_can(p1, p2, operation, privused) which allows specification of subject process, object process, inter-process operation, and an optional call-by-reference privused flag, allowing the caller to determine if privilege was required for the call to succeed. This allows jail, kern.ps_showallprocs and regular credential-based interaction checks to occur in one block of code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL, and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a series of static function checks in kern_prot, which should not be invoked directly. o Commented out capabilities entries are included for some checks. o Update most inter-process authorization to make use of p_can() instead of manual checks, PRISON_CHECK(), P_TRESPASS(), and kern.ps_showallprocs. o Modify suser{,_xxx} to use const arguments, as it no longer modifies process flags due to the disabling of ASU. o Modify some checks/errors in procfs so that ENOENT is returned instead of ESRCH, further improving concealment of processes that should not be visible to other processes. Also introduce new access checks to improve hiding of processes for procfs_lookup(), procfs_getattr(), procfs_readdir(). Correct a bug reported by bp concerning not handling the CREATE case in procfs_lookup(). Remove volatile flag in procfs that caused apparently spurious qualifier warnigns (approved by bde). o Add comment noting that ktrace() has not been updated, as its access control checks are different from ptrace(), whereas they should probably be the same. Further discussion should happen on this topic. Reviewed by: bde, green, phk, freebsd-security, others Approved by: bde Obtained from: TrustedBSD Project
2000-08-30 04:49:09 +00:00
int error;
int low = PRIO_MAX + 1;
struct ksegrp *kg;
1994-05-24 10:09:53 +00:00
PROC_LOCK_ASSERT(p, MA_OWNED);
if ((error = p_cansched(td, p)))
o Centralize inter-process access control, introducing: int p_can(p1, p2, operation, privused) which allows specification of subject process, object process, inter-process operation, and an optional call-by-reference privused flag, allowing the caller to determine if privilege was required for the call to succeed. This allows jail, kern.ps_showallprocs and regular credential-based interaction checks to occur in one block of code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL, and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a series of static function checks in kern_prot, which should not be invoked directly. o Commented out capabilities entries are included for some checks. o Update most inter-process authorization to make use of p_can() instead of manual checks, PRISON_CHECK(), P_TRESPASS(), and kern.ps_showallprocs. o Modify suser{,_xxx} to use const arguments, as it no longer modifies process flags due to the disabling of ASU. o Modify some checks/errors in procfs so that ENOENT is returned instead of ESRCH, further improving concealment of processes that should not be visible to other processes. Also introduce new access checks to improve hiding of processes for procfs_lookup(), procfs_getattr(), procfs_readdir(). Correct a bug reported by bp concerning not handling the CREATE case in procfs_lookup(). Remove volatile flag in procfs that caused apparently spurious qualifier warnigns (approved by bde). o Add comment noting that ktrace() has not been updated, as its access control checks are different from ptrace(), whereas they should probably be the same. Further discussion should happen on this topic. Reviewed by: bde, green, phk, freebsd-security, others Approved by: bde Obtained from: TrustedBSD Project
2000-08-30 04:49:09 +00:00
return (error);
1994-05-24 10:09:53 +00:00
if (n > PRIO_MAX)
n = PRIO_MAX;
if (n < PRIO_MIN)
n = PRIO_MIN;
/*
* Only allow nicing if to more than the lowest nice.
* e.g. nices of 4,3,2 allow nice to 3 but not 1
*/
FOREACH_KSEGRP_IN_PROC(p, kg) {
if (kg->kg_nice < low)
low = kg->kg_nice;
}
if (n < low && suser(td))
1994-05-24 10:09:53 +00:00
return (EACCES);
mtx_lock_spin(&sched_lock);
FOREACH_KSEGRP_IN_PROC(p, kg) {
sched_nice(kg, n);
}
mtx_unlock_spin(&sched_lock);
1994-05-24 10:09:53 +00:00
return (0);
}
/* rtprio system call */
#ifndef _SYS_SYSPROTO_H_
struct rtprio_args {
int function;
pid_t pid;
struct rtprio *rtp;
};
#endif
/*
* Set realtime priority
*/
/*
* MPSAFE
*/
/* ARGSUSED */
int
rtprio(td, uap)
struct thread *td;
register struct rtprio_args *uap;
{
struct proc *curp = td->td_proc;
register struct proc *p;
struct rtprio rtp;
int error, cierror = 0;
/* Perform copyin before acquiring locks if needed. */
if (uap->function == RTP_SET)
cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
if (uap->pid == 0) {
p = curp;
PROC_LOCK(p);
} else {
p = pfind(uap->pid);
if (p == NULL)
return (ESRCH);
}
switch (uap->function) {
case RTP_LOOKUP:
if ((error = p_cansee(td, p)))
break;
mtx_lock_spin(&sched_lock);
pri_to_rtp(FIRST_KSEGRP_IN_PROC(p), &rtp);
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
case RTP_SET:
if ((error = p_cansched(td, p)) || (error = cierror))
break;
/* disallow setting rtprio in most cases if not superuser */
if (suser(td) != 0) {
/* can't set someone else's */
if (uap->pid) {
error = EPERM;
break;
}
/* can't set realtime priority */
/*
* Realtime priority has to be restricted for reasons which should be
* obvious. However, for idle priority, there is a potential for
* system deadlock if an idleprio process gains a lock on a resource
* that other processes need (and the idleprio process can't run
* due to a CPU-bound normal process). Fix me! XXX
*/
#if 0
if (RTP_PRIO_IS_REALTIME(rtp.type))
#endif
if (rtp.type != RTP_PRIO_NORMAL) {
error = EPERM;
break;
}
}
mtx_lock_spin(&sched_lock);
error = rtp_to_pri(&rtp, FIRST_KSEGRP_IN_PROC(p));
mtx_unlock_spin(&sched_lock);
break;
default:
error = EINVAL;
break;
}
PROC_UNLOCK(p);
return (error);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int
rtp_to_pri(struct rtprio *rtp, struct ksegrp *kg)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
2003-04-18 20:17:47 +00:00
mtx_assert(&sched_lock, MA_OWNED);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
if (rtp->prio > RTP_PRIO_MAX)
return (EINVAL);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
switch (RTP_PRIO_BASE(rtp->type)) {
case RTP_PRIO_REALTIME:
kg->kg_user_pri = PRI_MIN_REALTIME + rtp->prio;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
case RTP_PRIO_NORMAL:
kg->kg_user_pri = PRI_MIN_TIMESHARE + rtp->prio;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
case RTP_PRIO_IDLE:
kg->kg_user_pri = PRI_MIN_IDLE + rtp->prio;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
default:
return (EINVAL);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
sched_class(kg, rtp->type);
if (curthread->td_ksegrp == kg) {
curthread->td_base_pri = kg->kg_user_pri;
curthread->td_priority = kg->kg_user_pri; /* XXX dubious */
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
return (0);
}
void
pri_to_rtp(struct ksegrp *kg, struct rtprio *rtp)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
2003-04-18 20:17:47 +00:00
mtx_assert(&sched_lock, MA_OWNED);
switch (PRI_BASE(kg->kg_pri_class)) {
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
case PRI_REALTIME:
rtp->prio = kg->kg_user_pri - PRI_MIN_REALTIME;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
case PRI_TIMESHARE:
rtp->prio = kg->kg_user_pri - PRI_MIN_TIMESHARE;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
case PRI_IDLE:
rtp->prio = kg->kg_user_pri - PRI_MIN_IDLE;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
break;
default:
break;
}
rtp->type = kg->kg_pri_class;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
1994-05-24 10:09:53 +00:00
#if defined(COMPAT_43) || defined(COMPAT_SUNOS)
#ifndef _SYS_SYSPROTO_H_
struct osetrlimit_args {
1994-05-24 10:09:53 +00:00
u_int which;
struct orlimit *rlp;
1994-05-24 10:09:53 +00:00
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
osetrlimit(td, uap)
struct thread *td;
register struct osetrlimit_args *uap;
1994-05-24 10:09:53 +00:00
{
struct orlimit olim;
struct rlimit lim;
int error;
2002-06-29 02:00:02 +00:00
if ((error = copyin(uap->rlp, &olim, sizeof(struct orlimit))))
1994-05-24 10:09:53 +00:00
return (error);
lim.rlim_cur = olim.rlim_cur;
lim.rlim_max = olim.rlim_max;
mtx_lock(&Giant);
error = dosetrlimit(td, uap->which, &lim);
mtx_unlock(&Giant);
return (error);
1994-05-24 10:09:53 +00:00
}
#ifndef _SYS_SYSPROTO_H_
struct ogetrlimit_args {
1994-05-24 10:09:53 +00:00
u_int which;
struct orlimit *rlp;
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
ogetrlimit(td, uap)
struct thread *td;
register struct ogetrlimit_args *uap;
1994-05-24 10:09:53 +00:00
{
struct proc *p = td->td_proc;
1994-05-24 10:09:53 +00:00
struct orlimit olim;
int error;
1994-05-24 10:09:53 +00:00
if (uap->which >= RLIM_NLIMITS)
return (EINVAL);
mtx_lock(&Giant);
1994-05-24 10:09:53 +00:00
olim.rlim_cur = p->p_rlimit[uap->which].rlim_cur;
if (olim.rlim_cur == -1)
olim.rlim_cur = 0x7fffffff;
olim.rlim_max = p->p_rlimit[uap->which].rlim_max;
if (olim.rlim_max == -1)
olim.rlim_max = 0x7fffffff;
2002-06-29 02:00:02 +00:00
error = copyout(&olim, uap->rlp, sizeof(olim));
mtx_unlock(&Giant);
return (error);
1994-05-24 10:09:53 +00:00
}
#endif /* COMPAT_43 || COMPAT_SUNOS */
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct __setrlimit_args {
u_int which;
struct rlimit *rlp;
1994-05-24 10:09:53 +00:00
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
setrlimit(td, uap)
struct thread *td;
1994-05-24 10:09:53 +00:00
register struct __setrlimit_args *uap;
{
struct rlimit alim;
int error;
2002-06-29 02:00:02 +00:00
if ((error = copyin(uap->rlp, &alim, sizeof (struct rlimit))))
1994-05-24 10:09:53 +00:00
return (error);
mtx_lock(&Giant);
error = dosetrlimit(td, uap->which, &alim);
mtx_unlock(&Giant);
return (error);
1994-05-24 10:09:53 +00:00
}
int
dosetrlimit(td, which, limp)
struct thread *td;
1994-05-24 10:09:53 +00:00
u_int which;
struct rlimit *limp;
{
struct proc *p = td->td_proc;
1994-05-24 10:09:53 +00:00
register struct rlimit *alimp;
int error;
GIANT_REQUIRED;
1994-05-24 10:09:53 +00:00
if (which >= RLIM_NLIMITS)
return (EINVAL);
alimp = &p->p_rlimit[which];
/*
* Preserve historical bugs by treating negative limits as unsigned.
*/
if (limp->rlim_cur < 0)
limp->rlim_cur = RLIM_INFINITY;
if (limp->rlim_max < 0)
limp->rlim_max = RLIM_INFINITY;
1995-05-30 08:16:23 +00:00
if (limp->rlim_cur > alimp->rlim_max ||
1994-05-24 10:09:53 +00:00
limp->rlim_max > alimp->rlim_max)
if ((error = suser_cred(td->td_ucred, PRISON_ROOT)))
1994-05-24 10:09:53 +00:00
return (error);
if (limp->rlim_cur > limp->rlim_max)
limp->rlim_cur = limp->rlim_max;
if (p->p_limit->p_refcnt > 1) {
1994-05-24 10:09:53 +00:00
p->p_limit->p_refcnt--;
p->p_limit = limcopy(p->p_limit);
alimp = &p->p_rlimit[which];
}
switch (which) {
case RLIMIT_CPU:
mtx_lock_spin(&sched_lock);
p->p_cpulimit = limp->rlim_cur;
mtx_unlock_spin(&sched_lock);
break;
1994-05-24 10:09:53 +00:00
case RLIMIT_DATA:
if (limp->rlim_cur > maxdsiz)
limp->rlim_cur = maxdsiz;
if (limp->rlim_max > maxdsiz)
limp->rlim_max = maxdsiz;
1994-05-24 10:09:53 +00:00
break;
case RLIMIT_STACK:
if (limp->rlim_cur > maxssiz)
limp->rlim_cur = maxssiz;
if (limp->rlim_max > maxssiz)
limp->rlim_max = maxssiz;
1994-05-24 10:09:53 +00:00
/*
* Stack is allocated to the max at exec time with only
* "rlim_cur" bytes accessible. If stack limit is going
* up make more accessible, if going down make inaccessible.
*/
if (limp->rlim_cur != alimp->rlim_cur) {
vm_offset_t addr;
vm_size_t size;
vm_prot_t prot;
if (limp->rlim_cur > alimp->rlim_cur) {
prot = p->p_sysent->sv_stackprot;
1994-05-24 10:09:53 +00:00
size = limp->rlim_cur - alimp->rlim_cur;
addr = p->p_sysent->sv_usrstack -
limp->rlim_cur;
1994-05-24 10:09:53 +00:00
} else {
prot = VM_PROT_NONE;
size = alimp->rlim_cur - limp->rlim_cur;
addr = p->p_sysent->sv_usrstack -
alimp->rlim_cur;
1994-05-24 10:09:53 +00:00
}
addr = trunc_page(addr);
size = round_page(size);
(void) vm_map_protect(&p->p_vmspace->vm_map,
addr, addr+size, prot, FALSE);
}
break;
case RLIMIT_NOFILE:
if (limp->rlim_cur > maxfilesperproc)
limp->rlim_cur = maxfilesperproc;
if (limp->rlim_max > maxfilesperproc)
limp->rlim_max = maxfilesperproc;
1994-05-24 10:09:53 +00:00
break;
case RLIMIT_NPROC:
if (limp->rlim_cur > maxprocperuid)
limp->rlim_cur = maxprocperuid;
if (limp->rlim_max > maxprocperuid)
limp->rlim_max = maxprocperuid;
if (limp->rlim_cur < 1)
limp->rlim_cur = 1;
if (limp->rlim_max < 1)
limp->rlim_max = 1;
1994-05-24 10:09:53 +00:00
break;
}
*alimp = *limp;
return (0);
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct __getrlimit_args {
u_int which;
struct rlimit *rlp;
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
getrlimit(td, uap)
struct thread *td;
1994-05-24 10:09:53 +00:00
register struct __getrlimit_args *uap;
{
int error;
struct proc *p = td->td_proc;
1994-05-24 10:09:53 +00:00
if (uap->which >= RLIM_NLIMITS)
return (EINVAL);
mtx_lock(&Giant);
2002-06-29 02:00:02 +00:00
error = copyout(&p->p_rlimit[uap->which], uap->rlp,
sizeof (struct rlimit));
mtx_unlock(&Giant);
return(error);
1994-05-24 10:09:53 +00:00
}
/*
* Transform the running time and tick information in proc p into user,
* system, and interrupt time usage.
*/
void
1994-05-24 10:09:53 +00:00
calcru(p, up, sp, ip)
struct proc *p;
struct timeval *up;
struct timeval *sp;
struct timeval *ip;
1994-05-24 10:09:53 +00:00
{
/* {user, system, interrupt, total} {ticks, usec}; previous tu: */
u_int64_t ut, uu, st, su, it, iu, tt, tu, ptu;
1994-05-24 10:09:53 +00:00
struct timeval tv;
struct bintime bt;
1994-05-24 10:09:53 +00:00
mtx_assert(&sched_lock, MA_OWNED);
/* XXX: why spl-protect ? worst case is an off-by-one report */
1994-05-24 10:09:53 +00:00
ut = p->p_uticks;
st = p->p_sticks;
it = p->p_iticks;
tt = ut + st + it;
if (tt == 0) {
st = 1;
tt = 1;
}
if (curthread->td_proc == p) {
1994-05-24 10:09:53 +00:00
/*
* Adjust for the current time slice. This is actually fairly
* important since the error here is on the order of a time
* quantum, which is much greater than the sampling error.
* XXXKSE use a different test due to threads on other
* processors also being 'current'.
1994-05-24 10:09:53 +00:00
*/
binuptime(&bt);
bintime_sub(&bt, PCPU_PTR(switchtime));
bintime_add(&bt, &p->p_runtime);
} else {
bt = p->p_runtime;
}
bintime2timeval(&bt, &tv);
tu = (u_int64_t)tv.tv_sec * 1000000 + tv.tv_usec;
ptu = p->p_uu + p->p_su + p->p_iu;
if (tu < ptu || (int64_t)tu < 0) {
/* XXX no %qd in kernel. Truncate. */
printf("calcru: negative time of %ld usec for pid %d (%s)\n",
(long)tu, p->p_pid, p->p_comm);
tu = ptu;
}
/* Subdivide tu. */
uu = (tu * ut) / tt;
su = (tu * st) / tt;
iu = tu - uu - su;
/* Enforce monotonicity. */
if (uu < p->p_uu || su < p->p_su || iu < p->p_iu) {
if (uu < p->p_uu)
uu = p->p_uu;
else if (uu + p->p_su + p->p_iu > tu)
uu = tu - p->p_su - p->p_iu;
if (st == 0)
su = p->p_su;
else {
su = ((tu - uu) * st) / (st + it);
if (su < p->p_su)
su = p->p_su;
else if (uu + su + p->p_iu > tu)
su = tu - uu - p->p_iu;
}
KASSERT(uu + su + p->p_iu <= tu,
("calcru: monotonisation botch 1"));
iu = tu - uu - su;
KASSERT(iu >= p->p_iu,
("calcru: monotonisation botch 2"));
}
p->p_uu = uu;
p->p_su = su;
p->p_iu = iu;
up->tv_sec = uu / 1000000;
up->tv_usec = uu % 1000000;
sp->tv_sec = su / 1000000;
sp->tv_usec = su % 1000000;
1994-05-24 10:09:53 +00:00
if (ip != NULL) {
ip->tv_sec = iu / 1000000;
ip->tv_usec = iu % 1000000;
1994-05-24 10:09:53 +00:00
}
}
#ifndef _SYS_SYSPROTO_H_
1994-05-24 10:09:53 +00:00
struct getrusage_args {
int who;
struct rusage *rusage;
};
#endif
/*
* MPSAFE
*/
1994-05-24 10:09:53 +00:00
/* ARGSUSED */
int
getrusage(td, uap)
register struct thread *td;
1994-05-24 10:09:53 +00:00
register struct getrusage_args *uap;
{
struct proc *p = td->td_proc;
1994-05-24 10:09:53 +00:00
register struct rusage *rup;
int error = 0;
1994-05-24 10:09:53 +00:00
mtx_lock(&Giant);
1994-05-24 10:09:53 +00:00
switch (uap->who) {
1994-05-24 10:09:53 +00:00
case RUSAGE_SELF:
rup = &p->p_stats->p_ru;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
1994-05-24 10:09:53 +00:00
calcru(p, &rup->ru_utime, &rup->ru_stime, NULL);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
1994-05-24 10:09:53 +00:00
break;
case RUSAGE_CHILDREN:
rup = &p->p_stats->p_cru;
break;
default:
rup = NULL;
error = EINVAL;
break;
}
mtx_unlock(&Giant);
if (error == 0) {
/* XXX Unlocked access to p_stats->p_ru or p_cru. */
2002-06-29 02:00:02 +00:00
error = copyout(rup, uap->rusage, sizeof (struct rusage));
1994-05-24 10:09:53 +00:00
}
return(error);
1994-05-24 10:09:53 +00:00
}
void
1994-05-24 10:09:53 +00:00
ruadd(ru, ru2)
register struct rusage *ru, *ru2;
{
register long *ip, *ip2;
register int i;
timevaladd(&ru->ru_utime, &ru2->ru_utime);
timevaladd(&ru->ru_stime, &ru2->ru_stime);
if (ru->ru_maxrss < ru2->ru_maxrss)
ru->ru_maxrss = ru2->ru_maxrss;
ip = &ru->ru_first; ip2 = &ru2->ru_first;
for (i = &ru->ru_last - &ru->ru_first; i >= 0; i--)
*ip++ += *ip2++;
}
/*
* Make a copy of the plimit structure.
* We share these structures copy-on-write after fork,
* and copy when a limit is changed.
*/
struct plimit *
limcopy(lim)
struct plimit *lim;
{
register struct plimit *copy;
MALLOC(copy, struct plimit *, sizeof(struct plimit),
M_SUBPROC, M_WAITOK);
bcopy(lim->pl_rlimit, copy->pl_rlimit, sizeof(struct plimit));
1994-05-24 10:09:53 +00:00
copy->p_refcnt = 1;
return (copy);
}
/*
* Find the uidinfo structure for a uid. This structure is used to
* track the total resource consumption (process count, socket buffer
* size, etc.) for the uid and impose limits.
*/
void
uihashinit()
{
uihashtbl = hashinit(maxproc / 16, M_UIDINFO, &uihash);
mtx_init(&uihashtbl_mtx, "uidinfo hash", NULL, MTX_DEF);
}
/*
* lookup a uidinfo struct for the parameter uid.
* uihashtbl_mtx must be locked.
*/
static struct uidinfo *
uilookup(uid)
uid_t uid;
{
struct uihashhead *uipp;
struct uidinfo *uip;
mtx_assert(&uihashtbl_mtx, MA_OWNED);
uipp = UIHASH(uid);
LIST_FOREACH(uip, uipp, ui_hash)
if (uip->ui_uid == uid)
break;
return (uip);
}
/*
* Find or allocate a struct uidinfo for a particular uid.
* Increase refcount on uidinfo struct returned.
* uifree() should be called on a struct uidinfo when released.
*/
struct uidinfo *
uifind(uid)
uid_t uid;
{
struct uidinfo *uip;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&uihashtbl_mtx);
uip = uilookup(uid);
if (uip == NULL) {
struct uidinfo *old_uip;
mtx_unlock(&uihashtbl_mtx);
uip = malloc(sizeof(*uip), M_UIDINFO, M_WAITOK | M_ZERO);
mtx_lock(&uihashtbl_mtx);
/*
* There's a chance someone created our uidinfo while we
* were in malloc and not holding the lock, so we have to
* make sure we don't insert a duplicate uidinfo
*/
if ((old_uip = uilookup(uid)) != NULL) {
/* someone else beat us to it */
free(uip, M_UIDINFO);
uip = old_uip;
} else {
uip->ui_mtxp = mtx_pool_alloc();
uip->ui_uid = uid;
LIST_INSERT_HEAD(UIHASH(uid), uip, ui_hash);
}
}
uihold(uip);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&uihashtbl_mtx);
return (uip);
}
/*
* Place another refcount on a uidinfo struct.
*/
void
uihold(uip)
struct uidinfo *uip;
{
UIDINFO_LOCK(uip);
uip->ui_ref++;
UIDINFO_UNLOCK(uip);
}
/*-
* Since uidinfo structs have a long lifetime, we use an
* opportunistic refcounting scheme to avoid locking the lookup hash
* for each release.
*
* If the refcount hits 0, we need to free the structure,
* which means we need to lock the hash.
* Optimal case:
* After locking the struct and lowering the refcount, if we find
* that we don't need to free, simply unlock and return.
* Suboptimal case:
* If refcount lowering results in need to free, bump the count
* back up, loose the lock and aquire the locks in the proper
* order to try again.
*/
void
uifree(uip)
struct uidinfo *uip;
{
/* Prepare for optimal case. */
UIDINFO_LOCK(uip);
if (--uip->ui_ref != 0) {
UIDINFO_UNLOCK(uip);
return;
}
/* Prepare for suboptimal case. */
uip->ui_ref++;
UIDINFO_UNLOCK(uip);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&uihashtbl_mtx);
UIDINFO_LOCK(uip);
/*
* We must subtract one from the count again because we backed out
* our initial subtraction before dropping the lock.
* Since another thread may have added a reference after we dropped the
* initial lock we have to test for zero again.
*/
if (--uip->ui_ref == 0) {
LIST_REMOVE(uip, ui_hash);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&uihashtbl_mtx);
if (uip->ui_sbsize != 0)
/* XXX no %qd in kernel. Truncate. */
printf("freeing uidinfo: uid = %d, sbsize = %ld\n",
uip->ui_uid, (long)uip->ui_sbsize);
if (uip->ui_proccnt != 0)
printf("freeing uidinfo: uid = %d, proccnt = %ld\n",
uip->ui_uid, uip->ui_proccnt);
UIDINFO_UNLOCK(uip);
FREE(uip, M_UIDINFO);
return;
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&uihashtbl_mtx);
UIDINFO_UNLOCK(uip);
}
/*
* Change the count associated with number of processes
* a given user is using. When 'max' is 0, don't enforce a limit
*/
int
chgproccnt(uip, diff, max)
struct uidinfo *uip;
int diff;
int max;
{
UIDINFO_LOCK(uip);
/* don't allow them to exceed max, but allow subtraction */
if (diff > 0 && uip->ui_proccnt + diff > max && max != 0) {
UIDINFO_UNLOCK(uip);
return (0);
}
uip->ui_proccnt += diff;
if (uip->ui_proccnt < 0)
printf("negative proccnt for uid = %d\n", uip->ui_uid);
UIDINFO_UNLOCK(uip);
return (1);
}
/*
* Change the total socket buffer size a user has used.
*/
int
chgsbsize(uip, hiwat, to, max)
struct uidinfo *uip;
u_int *hiwat;
u_int to;
rlim_t max;
{
rlim_t new;
int s;
s = splnet();
UIDINFO_LOCK(uip);
new = uip->ui_sbsize + to - *hiwat;
/* don't allow them to exceed max, but allow subtraction */
if (to > *hiwat && new > max) {
splx(s);
UIDINFO_UNLOCK(uip);
return (0);
}
uip->ui_sbsize = new;
*hiwat = to;
if (uip->ui_sbsize < 0)
printf("negative sbsize for uid = %d\n", uip->ui_uid);
splx(s);
UIDINFO_UNLOCK(uip);
return (1);
}