freebsd/installworld_newk

#!/bin/sh
# -------+---------+---------+---------+---------+---------+---------+---------+
# Copyright (c) 2004  - Garance Alistair Drosehn <gad@FreeBSD.org>.
#
# All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
#  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
#  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
#  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
#  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
#  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
#  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#  SUCH DAMAGE.
#
# -------+---------+---------+---------+---------+---------+---------+---------+
# $FreeBSD$
# -------+---------+---------+---------+---------+---------+---------+---------+
#
#   This script does a 'make installworld' using the *new* versions of all
# commands to do the work.  This is important when a major incompatible
# change is made, a change such that the old-binaries won't work when
# running on the new-kernel.  This script was written for the change to
# 64-bit time_t on FreeBSD/Sparc64, but it is not specific to that.
#
#   IMPORTANT: This script does require that you ARE RUNNING ON the
# new kernel that matches the 'world' that you want to install.
#
# -------+---------+---------+---------+---------+---------+---------+---------+

#   This script expects that it will be run from /usr/src, or an
#   equivalent (perhaps NFS-mounted) directory.
if [ -f MAINTAINERS -a -f UPDATING -a -f Makefile -a -f Makefile.inc1 ] ; then
    SOURCE_BWDIR="`make -V .OBJDIR`"
else
    echo "This script must be run from /usr/src!  (or equivalent)"
    exit 1
fi

DOMAKE=
DOMINI=
SETMINPATH=
SYMLINKS=
VERBOSE=
BADOPT=
while test $# != 0
do
    case "$1" in
    -M)   SETMINPATH=yes ;;
    -S)   SYMLINKS=yes ;;
    -y)   DOMAKE=yes ;;
    -n)   DOMAKE=no ;;
    -v)   VERBOSE=yes ;;
    *)    echo "Invalid option: $1" ; BADOPT=yes ;;
    esac
    shift 1
done
if [ -n "$BADOPT" ] ; then
    exit 1
fi

echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo "*  This script expects that a 'make installkernel' has already"
echo "*  been done, and that you HAVE rebooted, and you ARE running"
echo "*  on that new kernel."
echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo ""

#   Start out with no PATH at all.
PATH=

#   Where all the binaries should be coming from.
BW_BIN="${SOURCE_BWDIR}/bin"
BW_SBIN="${SOURCE_BWDIR}/sbin"
BW_UBIN="${SOURCE_BWDIR}/usr.bin"
BW_USBIN="${SOURCE_BWDIR}/usr.sbin"
BW_GUBIN="${SOURCE_BWDIR}/gnu/usr.bin"

MKTEMPCMD=/usr/bin/mktemp
chkfile="${BW_UBIN}/mktemp/mktemp"
if [ -f "${chkfile}" -a -x "${chkfile}" ] ; then
    MKTEMPCMD="${chkfile}"
else
    echo "** Cannot find ${chkfile}?"
    echo "** Will use ${MKTEMPCMD}"
fi

#   I intentionally prefer to have a shorter name here...  We just need a
#   unique name, we're not likely to be under attack during installworld!
TMPHOLD=`"${MKTEMPCMD}" -q -d ${TMPDIR:-/tmp}/install-newk.XXX`
if [ $? -ne 0 ] ; then
    echo "** Unable to create temp program-holding directory"
    exit 1
fi

#   Set the most-restrictive value for PATH that the user is willing to
#   shoot for.  The more restrictive we are here, the more likely we
#   will catch all references to "old version" executables.
PATH=${TMPHOLD}:/sbin:/bin:/usr/sbin:/usr/bin
if [ -n "$SETMINPATH" ] ; then
    PATH=${TMPHOLD}
fi

#   Find the most-appropriate version of key commands for this script.
#   XXX - It would be nice if we could reliably find the exact kernel that
#	we booted up with, and check for the optional mini-/bin in it.
COPYCMD=/missing/cp
for chkexec in "${BW_BIN}/cp/cp" /bin/cp ; do
    if [ -f "${chkexec}" ] ; then
        COPYCMD="${chkexec} -p"
        break
    fi
done
LINKCMD=/missing/ln
for chkexec in "${BW_BIN}/ln/ln" /bin/ln ; do
    if [ -f "${chkexec}" ] ; then
        LINKCMD="${chkexec}"
        break
    fi
done
COPYINFO="Copying"

copy_exec () {
    srcdir="$1"
    cmdname="$2"
    alsoln="$3"
    srcfile="${srcdir}/${cmdname}"

    if [ -f "${srcfile}" -a -x "${srcfile}" ] ; then
        if [ -n "$VERBOSE" ] ; then
	    echo ".. ${COPYINFO} ${srcfile}"
	fi
	${COPYCMD} "${srcfile}" "${TMPHOLD}"
	if [ $? -ne 0 ] ; then
	    echo "** Error ${COPYINFO} '${srcfile}'"
	    exit 1
	fi
    else
        echo "** Cannot find ${cmdname} in ${srcdir}?"
        exit 1
    fi

    if [ -n "${alsoln}" ] ; then
	if [ -n "$VERBOSE" ] ; then
	    echo ".. Linking '${cmdname}' as '${alsoln}' "
	fi
	${LINKCMD} "${TMPHOLD}/${cmdname}" "${TMPHOLD}/${alsoln}"
	if [ $? -ne 0 ] ; then
	    echo "** Error Linking '${cmdname}'"
	    exit 1
	fi
    fi
}

# The programs listed in the following `do' loop are all the same programs
# that the standard 'installworld' target wants to make copies of, except
# that this has special-cases for `awk', `[', and `egrep'.  This script
# also adds the commands `cp', `install', `id' and `which', because those
# are also *used* by the standard `make installworld' target, although
# that target doesn't bother to make copies of those programs.  The `sleep'
# command is also added, but only because it is used in this script.  And
# `script' is included just because it can be useful when testing this script.
#
# Note that this means there will be two copies made of these files
# (because the 'make installworld' target is still going to copy them a
# second time).
# XXX - also remember that these are dynamically-linked, so this is not
#       necessarily a perfect solution for the 'general case', but it
#       does seem to work correctly for the switch to 64-bit time_t.

#   Do the `cp' command first, because this script does so much with it.
chkfile="${BW_BIN}/cp/cp"
if [ -f "${chkfile}" -a -x "${chkfile}" ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Copying ${chkfile}"
    fi
    ${COPYCMD} "${chkfile}" ${TMPHOLD}
else
    echo "** Cannot find ${chkfile}?"
    exit 1
fi

#   Do the `ln' command as the second one, for similar reasons.
copy_exec "${BW_BIN}/ln" ln

#   Awk is also called 'nawk'
copy_exec "${BW_UBIN}/awk" nawk awk

#   The `install' comand is also is a special case, because
#   the program is actually built under the name 'xinstall'.
copy_exec "${BW_UBIN}/xinstall" xinstall install

#   Mergemaster is another special case, because it's a script which is
#   pulled from the /usr/src directory (not from /usr/obj/usr/src/...).
#   Strictly speaking we shouldn't need to pull this in, but I do in
#   case someone says 'no' to the automatic-installworld at the end
#   if this script.  If they also specified -M, then they end up with
#   a PATH which will have only our TMPHOLD directory when they get
#   to the mergemaster step.
copy_exec "`pwd`/usr.sbin/mergemaster" mergemaster.sh mergemaster

#   Worried about the extra disk space that this script uses up in /tmp?  Well,
#   just specify the -S option, and this script will create symlinks instead of
#   copying the files.  Note that the original files might be NFS-mounted, and
#   /tmp might be a memory-based file system, so the `installworld' might go
#   much faster when copies are done here instead of symlinks.
if [ -n "$SYMLINKS" ] ; then
    COPYINFO="Linking to"
    COPYCMD="ln -s"
    LINKCMD="ln -s"
fi

for prog in cap_mkdb cat chflags chmod chown date \
            echo       find grep    make mkdir mtree mv \
            pwd_mkdb rm sed sh sysctl test true uname wc zic \
            hostname id ls sleep script umount which xargs
do
    gotmatch=
    for chkdir in "${BW_BIN}" "${BW_SBIN}" "${BW_UBIN}" "${BW_GUBIN}" \
                   "${BW_USBIN}" "${BW_USBIN}/${prog}"
    do
        #  (the above extra-${prog} case is only needed for 'zic')
        chkdir="${chkdir}/${prog}"
        if [ -f "${chkdir}/${prog}" -a -x "${chkdir}/${prog}" ] ; then
            gotmatch=yes
            copy_exec "${chkdir}" "${prog}"
            if [ $? -ne 0 ] ; then
                exit 1
            fi
            break
        fi
    done
    if [ -z "$gotmatch" ] ; then
        echo "** Did not find '${prog}' ?"
    fi
done

#   Special case to handle '[', which we know is the same as 'test'
if [ -x ${TMPHOLD}/test ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Linking 'test' as '[' "
    fi
    ${LINKCMD} ${TMPHOLD}/test ${TMPHOLD}/[
fi
#   Special case for 'egrep', which is the same as 'grep'
if [ -x ${TMPHOLD}/grep ] ; then
    if [ -n "$VERBOSE" ] ; then
        echo ".. Linking 'grep' as 'egrep' "
    fi
    ${LINKCMD} ${TMPHOLD}/grep ${TMPHOLD}/egrep
fi

#   Have to duplicate the standard makefile, to make a few changes.

#   First find the setting of PATH.  Insert a line in front of that
#   which uses the (undocumented) .SHELL feature to get 'make' to
#   use the newer version of /bin/sh that we just made a copy of.
#   Then alter the PATH setting so that all make targets check our
#   directory of copied files first.  If '-M' was given, then have
#   a PATH setting that looks ONLY at our copied files.
#    
#   XXX - the .SHELL feature did NOT seem to work the way that I
#	wanted it to, but that is not a problem for now.  It can
#	be looked into at some later date...
nawk '/^PATH=/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    if (WANTMIN == "yes") \
	        sub(/^PATH *=[ \t]*.*/, "PATH=\t" TDIR ); \
	    else \
	        sub(/^PATH *=[ \t]*/, "PATH=\t" TDIR ":"); \
	    } \
      /-f Makefile.inc1/ { \
	    sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
	    } \
      { print $0 }' \
    "TDIR=${TMPHOLD}" "WANTMIN=${SETMINPATH}" Makefile > ${TMPHOLD}/Makefile

#   In the case of this script, we also change Makefile.inc1, just to
#   set the .SHELL target, and to make it (Makefile.inc1) reference
#   the modified version in 'make -f' references.  Someone recently
#   committed a total restructuring of Makefile.inc1, so the following
#   has to be setup such that it works with both formats.
nawk '/^# Put initial settings/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    } \
      /^SUBDIR=[\t ]*share\/info .*bin/ { \
	    print "#   Try to get the make cmd to use an alternate /bin/sh." ; \
	    print ".SHELL : name=sh path=" TDIR "/sh"  ; \
	    print "" ; \
	    } \
      /-f Makefile.inc1/ { \
	    sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
	    } \
     { print $0 }' \
    "TDIR=${TMPHOLD}" Makefile.inc1 > "${TMPHOLD}/Makefile.inc1"

echo ""
echo "The key programs needed by 'make installworld' have been copied."
if [ -n "$VERBOSE" ] ; then
    ls -C ${TMPHOLD}
    echo ""
fi

#   The sparc64_installcheck will want this in the environment.
NEWSPARC_TIMETYPE=__int64_t
export NEWSPARC_TIMETYPE

# See if the user wants us to go ahead with 'installworld',
#     or just tell them what steps they need to do.
if [ -z "${DOMAKE}" ] ; then
    echo "Do you want to proceed with 'installworld'? "
    read -p "(y/n) ? "  DOMAKE remline
    echo " "
fi
if [ -n "`echo /y/yes/okay/ok/ | grep -i \"/${DOMAKE}/\"`" ] ; then
    echo "Okay then, this script has set:"
    echo "    NEWSPARC_TIMETYPE=__int64_t"
    echo "    PATH=${PATH}"
    echo "and will now execute the command:"
    echo "    make -f ${TMPHOLD}/Makefile installworld"
    sleep 4
    make -f ${TMPHOLD}/Makefile installworld
else
    echo "When you are ready to continue, enter the commands:"
    echo "    PATH=${PATH}"
    echo "or:"
    echo "    PATH=${TMPHOLD}:\${PATH}"
    echo "and:"
    echo "    NEWSPARC_TIMETYPE=__int64_t"
    echo "    export NEWSPARC_TIMETYPE"
    echo "    make -f ${TMPHOLD}/Makefile installworld"
fi