1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
freebsd/sys/cam/scsi/scsi_pass.c

818 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, 1998 Justin T. Gibbs.
* Copyright (c) 1997, 1998 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: scsi_pass.c,v 1.4 1998/10/22 22:16:56 ken Exp $
*/
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/buf.h>
#include <sys/dkbad.h>
#include <sys/disklabel.h>
#include <sys/diskslice.h>
#include <sys/malloc.h>
#include <sys/fcntl.h>
#include <sys/stat.h>
#include <sys/conf.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/errno.h>
#include <sys/devicestat.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_extend.h>
#include <cam/cam_periph.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_da.h>
#include <cam/scsi/scsi_pass.h>
typedef enum {
PASS_FLAG_OPEN = 0x01,
PASS_FLAG_LOCKED = 0x02,
PASS_FLAG_INVALID = 0x04
} pass_flags;
typedef enum {
PASS_STATE_NORMAL
} pass_state;
typedef enum {
PASS_CCB_BUFFER_IO,
PASS_CCB_WAITING
} pass_ccb_types;
#define ccb_type ppriv_field0
#define ccb_bp ppriv_ptr1
struct pass_softc {
pass_state state;
pass_flags flags;
u_int8_t pd_type;
struct buf_queue_head buf_queue;
union ccb saved_ccb;
struct devstat device_stats;
#ifdef DEVFS
void *pass_devfs_token;
void *ctl_devfs_token;
#endif
};
#ifndef MIN
#define MIN(x,y) ((x<y) ? x : y)
#endif
#define PASS_CDEV_MAJOR 31
static d_open_t passopen;
static d_read_t passread;
static d_write_t passwrite;
static d_close_t passclose;
static d_ioctl_t passioctl;
static d_strategy_t passstrategy;
static periph_init_t passinit;
static periph_ctor_t passregister;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
static periph_oninv_t passoninvalidate;
static periph_dtor_t passcleanup;
static periph_start_t passstart;
static void passasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg);
static void passdone(struct cam_periph *periph,
union ccb *done_ccb);
static int passerror(union ccb *ccb, u_int32_t cam_flags,
u_int32_t sense_flags);
static int passsendccb(struct cam_periph *periph, union ccb *ccb,
union ccb *inccb);
static struct periph_driver passdriver =
{
passinit, "pass",
TAILQ_HEAD_INITIALIZER(passdriver.units), /* generation */ 0
};
DATA_SET(periphdriver_set, passdriver);
static struct cdevsw pass_cdevsw =
{
/*d_open*/ passopen,
/*d_close*/ passclose,
/*d_read*/ passread,
/*d_write*/ passwrite,
/*d_ioctl*/ passioctl,
/*d_stop*/ nostop,
/*d_reset*/ noreset,
/*d_devtotty*/ nodevtotty,
/*d_poll*/ seltrue,
/*d_mmap*/ nommap,
/*d_strategy*/ passstrategy,
/*d_name*/ "pass",
/*d_spare*/ NULL,
/*d_maj*/ -1,
/*d_dump*/ nodump,
/*d_psize*/ nopsize,
/*d_flags*/ 0,
/*d_maxio*/ 0,
/*b_maj*/ -1
};
static struct extend_array *passperiphs;
static void
passinit(void)
{
cam_status status;
struct cam_path *path;
/*
* Create our extend array for storing the devices we attach to.
*/
passperiphs = cam_extend_new();
if (passperiphs == NULL) {
printf("passm: Failed to alloc extend array!\n");
return;
}
/*
* Install a global async callback. This callback will
* receive async callbacks like "new device found".
*/
status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
if (status == CAM_REQ_CMP) {
struct ccb_setasync csa;
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_FOUND_DEVICE;
csa.callback = passasync;
csa.callback_arg = NULL;
xpt_action((union ccb *)&csa);
status = csa.ccb_h.status;
xpt_free_path(path);
}
if (status != CAM_REQ_CMP) {
printf("pass: Failed to attach master async callback "
"due to status 0x%x!\n", status);
} else {
dev_t dev;
/* If we were successfull, register our devsw */
dev = makedev(PASS_CDEV_MAJOR, 0);
cdevsw_add(&dev, &pass_cdevsw, NULL);
}
}
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
static void
passoninvalidate(struct cam_periph *periph)
{
int s;
struct pass_softc *softc;
struct buf *q_bp;
struct ccb_setasync csa;
softc = (struct pass_softc *)periph->softc;
/*
* De-register any async callbacks.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path,
/* priority */ 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = 0;
csa.callback = passasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
softc->flags |= PASS_FLAG_INVALID;
/*
* Although the oninvalidate() routines are always called at
* splsoftcam, we need to be at splbio() here to keep the buffer
* queue from being modified while we traverse it.
*/
s = splbio();
/*
* Return all queued I/O with ENXIO.
* XXX Handle any transactions queued to the card
* with XPT_ABORT_CCB.
*/
while ((q_bp = bufq_first(&softc->buf_queue)) != NULL){
bufq_remove(&softc->buf_queue, q_bp);
q_bp->b_resid = q_bp->b_bcount;
q_bp->b_error = ENXIO;
q_bp->b_flags |= B_ERROR;
biodone(q_bp);
}
splx(s);
if (bootverbose) {
xpt_print_path(periph->path);
printf("lost device\n");
}
}
static void
passcleanup(struct cam_periph *periph)
{
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
struct pass_softc *softc;
softc = (struct pass_softc *)periph->softc;
devstat_remove_entry(&softc->device_stats);
cam_extend_release(passperiphs, periph->unit_number);
if (bootverbose) {
xpt_print_path(periph->path);
printf("removing device entry\n");
}
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
free(softc, M_DEVBUF);
}
static void
passasync(void *callback_arg, u_int32_t code,
struct cam_path *path, void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)callback_arg;
switch (code) {
case AC_FOUND_DEVICE:
{
struct ccb_getdev *cgd;
cam_status status;
cgd = (struct ccb_getdev *)arg;
/*
* Allocate a peripheral instance for
* this device and start the probe
* process.
*/
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
status = cam_periph_alloc(passregister, passoninvalidate,
passcleanup, passstart, "pass",
CAM_PERIPH_BIO, cgd->ccb_h.path,
passasync, AC_FOUND_DEVICE, cgd);
if (status != CAM_REQ_CMP
&& status != CAM_REQ_INPROG)
printf("passasync: Unable to attach new device "
"due to status 0x%x\n", status);
break;
}
case AC_LOST_DEVICE:
cam_periph_invalidate(periph);
break;
case AC_TRANSFER_NEG:
case AC_SENT_BDR:
case AC_SCSI_AEN:
case AC_UNSOL_RESEL:
case AC_BUS_RESET:
default:
break;
}
}
static cam_status
passregister(struct cam_periph *periph, void *arg)
{
struct pass_softc *softc;
struct ccb_setasync csa;
struct ccb_getdev *cgd;
cgd = (struct ccb_getdev *)arg;
if (periph == NULL) {
printf("passregister: periph was NULL!!\n");
return(CAM_REQ_CMP_ERR);
}
if (cgd == NULL) {
printf("passregister: no getdev CCB, can't register device\n");
return(CAM_REQ_CMP_ERR);
}
softc = (struct pass_softc *)malloc(sizeof(*softc),
M_DEVBUF, M_NOWAIT);
if (softc == NULL) {
printf("passregister: Unable to probe new device. "
"Unable to allocate softc\n");
return(CAM_REQ_CMP_ERR);
}
bzero(softc, sizeof(*softc));
softc->state = PASS_STATE_NORMAL;
softc->pd_type = cgd->pd_type;
bufq_init(&softc->buf_queue);
periph->softc = softc;
cam_extend_set(passperiphs, periph->unit_number, periph);
/*
* We pass in 0 for a blocksize, since we don't
* know what the blocksize of this device is, if
* it even has a blocksize.
*/
devstat_add_entry(&softc->device_stats, "pass", periph->unit_number,
0, DEVSTAT_NO_BLOCKSIZE | DEVSTAT_NO_ORDERED_TAGS,
cgd->pd_type |
DEVSTAT_TYPE_IF_SCSI |
DEVSTAT_TYPE_PASS);
/*
* Add an async callback so that we get
* notified if this device goes away.
*/
xpt_setup_ccb(&csa.ccb_h, periph->path, /* priority */ 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = passasync;
csa.callback_arg = periph;
xpt_action((union ccb *)&csa);
if (bootverbose)
xpt_announce_periph(periph, NULL);
return(CAM_REQ_CMP);
}
static int
passopen(dev_t dev, int flags, int fmt, struct proc *p)
{
struct cam_periph *periph;
struct pass_softc *softc;
int unit, error;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
int s;
error = 0; /* default to no error */
/* unit = dkunit(dev); */
/* XXX KDM fix this */
unit = minor(dev) & 0xff;
periph = cam_extend_get(passperiphs, unit);
if (periph == NULL)
return (ENXIO);
softc = (struct pass_softc *)periph->softc;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
s = splsoftcam();
if (softc->flags & PASS_FLAG_INVALID) {
splx(s);
return(ENXIO);
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
}
/*
* Don't allow access when we're running at a high securelvel.
*/
if (securelevel > 1) {
splx(s);
return(EPERM);
}
/*
* Only allow read-write access.
*/
if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0)) {
splx(s);
return(EPERM);
}
/*
* We don't allow nonblocking access.
*/
if ((flags & O_NONBLOCK) != 0) {
xpt_print_path(periph->path);
printf("can't do nonblocking accesss\n");
splx(s);
return(EINVAL);
}
if ((error = cam_periph_lock(periph, PRIBIO | PCATCH)) != 0) {
splx(s);
return (error);
}
splx(s);
if ((softc->flags & PASS_FLAG_OPEN) == 0) {
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
return(ENXIO);
softc->flags |= PASS_FLAG_OPEN;
}
cam_periph_unlock(periph);
return (error);
}
static int
passclose(dev_t dev, int flag, int fmt, struct proc *p)
{
struct cam_periph *periph;
struct pass_softc *softc;
int unit, error;
/* unit = dkunit(dev); */
/* XXX KDM fix this */
unit = minor(dev) & 0xff;
periph = cam_extend_get(passperiphs, unit);
if (periph == NULL)
return (ENXIO);
softc = (struct pass_softc *)periph->softc;
if ((error = cam_periph_lock(periph, PRIBIO)) != 0)
return (error);
softc->flags &= ~PASS_FLAG_OPEN;
cam_periph_unlock(periph);
cam_periph_release(periph);
return (0);
}
static int
passread(dev_t dev, struct uio *uio, int ioflag)
{
return(physio(passstrategy, NULL, dev, 1, minphys, uio));
}
static int
passwrite(dev_t dev, struct uio *uio, int ioflag)
{
return(physio(passstrategy, NULL, dev, 0, minphys, uio));
}
/*
* Actually translate the requested transfer into one the physical driver
* can understand. The transfer is described by a buf and will include
* only one physical transfer.
*/
static void
passstrategy(struct buf *bp)
{
struct cam_periph *periph;
struct pass_softc *softc;
u_int unit;
int s;
/*
* The read/write interface for the passthrough driver doesn't
* really work right now. So, we just pass back EINVAL to tell the
* user to go away.
*/
bp->b_error = EINVAL;
goto bad;
/* unit = dkunit(bp->b_dev); */
/* XXX KDM fix this */
unit = minor(bp->b_dev) & 0xff;
periph = cam_extend_get(passperiphs, unit);
if (periph == NULL) {
bp->b_error = ENXIO;
goto bad;
}
softc = (struct pass_softc *)periph->softc;
/*
* Odd number of bytes or negative offset
*/
/* valid request? */
if (bp->b_blkno < 0) {
bp->b_error = EINVAL;
goto bad;
}
/*
* Mask interrupts so that the pack cannot be invalidated until
* after we are in the queue. Otherwise, we might not properly
* clean up one of the buffers.
*/
s = splbio();
bufq_insert_tail(&softc->buf_queue, bp);
splx(s);
/*
* Schedule ourselves for performing the work.
*/
xpt_schedule(periph, /* XXX priority */1);
return;
bad:
bp->b_flags |= B_ERROR;
/*
* Correctly set the buf to indicate a completed xfer
*/
bp->b_resid = bp->b_bcount;
biodone(bp);
return;
}
static void
passstart(struct cam_periph *periph, union ccb *start_ccb)
{
struct pass_softc *softc;
int s;
softc = (struct pass_softc *)periph->softc;
switch (softc->state) {
case PASS_STATE_NORMAL:
{
struct buf *bp;
s = splbio();
bp = bufq_first(&softc->buf_queue);
if (periph->immediate_priority <= periph->pinfo.priority) {
start_ccb->ccb_h.ccb_type = PASS_CCB_WAITING;
SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
periph_links.sle);
periph->immediate_priority = CAM_PRIORITY_NONE;
splx(s);
wakeup(&periph->ccb_list);
} else if (bp == NULL) {
splx(s);
xpt_release_ccb(start_ccb);
} else {
bufq_remove(&softc->buf_queue, bp);
devstat_start_transaction(&softc->device_stats);
/*
* XXX JGibbs -
* Interpret the contents of the bp as a CCB
* and pass it to a routine shared by our ioctl
* code and passtart.
* For now, just biodone it with EIO so we don't
* hang.
*/
bp->b_error = EIO;
bp->b_flags |= B_ERROR;
bp->b_resid = bp->b_bcount;
biodone(bp);
bp = bufq_first(&softc->buf_queue);
splx(s);
xpt_action(start_ccb);
}
if (bp != NULL) {
/* Have more work to do, so ensure we stay scheduled */
xpt_schedule(periph, /* XXX priority */1);
}
break;
}
}
}
static void
passdone(struct cam_periph *periph, union ccb *done_ccb)
{
struct pass_softc *softc;
struct ccb_scsiio *csio;
softc = (struct pass_softc *)periph->softc;
csio = &done_ccb->csio;
switch (csio->ccb_h.ccb_type) {
case PASS_CCB_BUFFER_IO:
{
struct buf *bp;
cam_status status;
u_int8_t scsi_status;
devstat_trans_flags ds_flags;
status = done_ccb->ccb_h.status;
scsi_status = done_ccb->csio.scsi_status;
bp = (struct buf *)done_ccb->ccb_h.ccb_bp;
/* XXX handle errors */
if (!(((status & CAM_STATUS_MASK) == CAM_REQ_CMP)
&& (scsi_status == SCSI_STATUS_OK))) {
int error;
if ((error = passerror(done_ccb, 0, 0)) == ERESTART) {
/*
* A retry was scheuled, so
* just return.
*/
return;
}
/*
* XXX unfreeze the queue after we complete
* the abort process
*/
bp->b_error = error;
bp->b_flags |= B_ERROR;
}
if ((done_ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
ds_flags = DEVSTAT_READ;
else if ((done_ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
ds_flags = DEVSTAT_WRITE;
else
ds_flags = DEVSTAT_NO_DATA;
devstat_end_transaction(&softc->device_stats, bp->b_bcount,
done_ccb->csio.tag_action & 0xf,
ds_flags);
biodone(bp);
break;
}
case PASS_CCB_WAITING:
{
/* Caller will release the CCB */
wakeup(&done_ccb->ccb_h.cbfcnp);
return;
}
}
xpt_release_ccb(done_ccb);
}
static int
passioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p)
{
struct cam_periph *periph;
struct pass_softc *softc;
u_int8_t unit;
int error;
/* unit = dkunit(dev); */
/* XXX KDM fix this */
unit = minor(dev) & 0xff;
periph = cam_extend_get(passperiphs, unit);
if (periph == NULL)
return(ENXIO);
softc = (struct pass_softc *)periph->softc;
error = 0;
switch (cmd) {
case CAMIOCOMMAND:
{
union ccb *inccb;
union ccb *ccb;
inccb = (union ccb *)addr;
ccb = cam_periph_getccb(periph, inccb->ccb_h.pinfo.priority);
error = passsendccb(periph, ccb, inccb);
xpt_release_ccb(ccb);
break;
}
default:
error = cam_periph_ioctl(periph, cmd, addr, passerror);
break;
}
return(error);
}
/*
* Generally, "ccb" should be the CCB supplied by the kernel. "inccb"
* should be the CCB that is copied in from the user.
*/
static int
passsendccb(struct cam_periph *periph, union ccb *ccb, union ccb *inccb)
{
struct pass_softc *softc;
struct cam_periph_map_info mapinfo;
int error, need_unmap;
softc = (struct pass_softc *)periph->softc;
need_unmap = 0;
/*
* There are some fields in the CCB header that need to be
* preserved, the rest we get from the user.
*/
xpt_merge_ccb(ccb, inccb);
/*
* There's no way for the user to have a completion
* function, so we put our own completion function in here.
*/
ccb->ccb_h.cbfcnp = passdone;
/*
* We only attempt to map the user memory into kernel space
* if they haven't passed in a physical memory pointer,
* and if there is actually an I/O operation to perform.
* Right now cam_periph_mapmem() only supports SCSI and device
* match CCBs. For the SCSI CCBs, we only pass the CCB in if
* there's actually data to map. cam_periph_mapmem() will do the
* right thing, even if there isn't data to map, but since CCBs
* without data are a reasonably common occurance (e.g. test unit
* ready), it will save a few cycles if we check for it here.
*/
if (((ccb->ccb_h.flags & CAM_DATA_PHYS) == 0)
&& (((ccb->ccb_h.func_code == XPT_SCSI_IO)
&& ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE))
|| (ccb->ccb_h.func_code == XPT_DEV_MATCH))) {
bzero(&mapinfo, sizeof(mapinfo));
error = cam_periph_mapmem(ccb, &mapinfo);
/*
* cam_periph_mapmem returned an error, we can't continue.
* Return the error to the user.
*/
if (error)
return(error);
/*
* We successfully mapped the memory in, so we need to
* unmap it when the transaction is done.
*/
need_unmap = 1;
}
/*
* If the user wants us to perform any error recovery, then honor
* that request. Otherwise, it's up to the user to perform any
* error recovery.
*/
error = cam_periph_runccb(ccb,
(ccb->ccb_h.flags & CAM_PASS_ERR_RECOVER) ?
passerror : NULL,
/* cam_flags */ 0,
/* sense_flags */SF_RETRY_UA,
&softc->device_stats);
if (need_unmap != 0)
cam_periph_unmapmem(ccb, &mapinfo);
ccb->ccb_h.cbfcnp = NULL;
ccb->ccb_h.periph_priv = inccb->ccb_h.periph_priv;
bcopy(ccb, inccb, sizeof(union ccb));
return(error);
}
static int
passerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
{
struct cam_periph *periph;
struct pass_softc *softc;
periph = xpt_path_periph(ccb->ccb_h.path);
softc = (struct pass_softc *)periph->softc;
return(cam_periph_error(ccb, cam_flags, sense_flags,
&softc->saved_ccb));
}