mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
a851c66778
freebsd/sys/dev/hme/if_hme_sbus.c

337 lines
9.1 KiB
C
Raw Normal View History

Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
/*-
* Copyright (c) 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
* from: NetBSD: if_hme_sbus.c,v 1.19 2004/03/17 17:04:58 pk Exp
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
/*
* SBus front-end device driver for the HME ethernet device.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
Provide necessary includes.
2013-10-28 23:34:05 +00:00
#include <sys/lock.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
#include <sys/kernel.h>
Add missing <sys/module.h> includes currently relying on nested include in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
#include <sys/module.h>
Provide necessary includes.
2013-10-28 23:34:05 +00:00
#include <sys/mutex.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
#include <sys/resource.h>
#include <sys/socket.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
#include <machine/bus.h>
#include <machine/ofw_machdep.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/if.h>
#include <net/if_media.h>
Provide necessary includes.
2013-10-28 23:34:05 +00:00
#include <net/ethernet.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
s#<foo/bar.h>#<dev/foo/bar.h>#g
2003-08-23 05:51:03 +00:00
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
#include <sparc64/sbus/sbusvar.h>
s#<foo/bar.h>#<dev/foo/bar.h>#g
2003-08-23 05:51:03 +00:00
#include <dev/hme/if_hmereg.h>
#include <dev/hme/if_hmevar.h>
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
#include "miibus_if.h"
struct hme_sbus_softc {
struct hme_softc hsc_hme; /* HME device */
struct resource *hsc_seb_res;
struct resource *hsc_etx_res;
struct resource *hsc_erx_res;
struct resource *hsc_mac_res;
struct resource *hsc_mif_res;
struct resource *hsc_ires;
void *hsc_ih;
};
static int hme_sbus_probe(device_t);
static int hme_sbus_attach(device_t);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
static int hme_sbus_detach(device_t);
static int hme_sbus_suspend(device_t);
static int hme_sbus_resume(device_t);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
static device_method_t hme_sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, hme_sbus_probe),
DEVMETHOD(device_attach, hme_sbus_attach),
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
DEVMETHOD(device_detach, hme_sbus_detach),
DEVMETHOD(device_suspend, hme_sbus_suspend),
DEVMETHOD(device_resume, hme_sbus_resume),
/* Can just use the suspend method here. */
DEVMETHOD(device_shutdown, hme_sbus_suspend),
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
/* MII interface */
DEVMETHOD(miibus_readreg, hme_mii_readreg),
DEVMETHOD(miibus_writereg, hme_mii_writereg),
DEVMETHOD(miibus_statchg, hme_mii_statchg),
- There's no need to overwrite the default device method with the default one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
DEVMETHOD_END
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
};
static driver_t hme_sbus_driver = {
"hme",
hme_sbus_methods,
sizeof(struct hme_sbus_softc)
};
- Express hard dependencies on bus (pci, isa, pccard) and network layer (ether). - Don't abuse module names to facilitate ifconfig module loading; such abuse isn't really needed. (And if we do need type information associated with a module then we should make it explicit and not use hacks.)
2003-04-15 06:37:30 +00:00
DRIVER_MODULE(hme, sbus, hme_sbus_driver, hme_devclass, 0, 0);
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
MODULE_DEPEND(hme, sbus, 1, 1, 1);
- Express hard dependencies on bus (pci, isa, pccard) and network layer (ether). - Don't abuse module names to facilitate ifconfig module loading; such abuse isn't really needed. (And if we do need type information associated with a module then we should make it explicit and not use hacks.)
2003-04-15 06:37:30 +00:00
MODULE_DEPEND(hme, ether, 1, 1, 1);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
static int
hme_sbus_probe(device_t dev)
{
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
const char *name;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
name = ofw_bus_get_name(dev);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (strcmp(name, "SUNW,qfe") == 0 ||
strcmp(name, "SUNW,hme") == 0) {
device_set_desc(dev, "Sun HME 10/100 Ethernet");
return (0);
}
return (ENXIO);
}
static int
hme_sbus_attach(device_t dev)
{
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
struct hme_sbus_softc *hsc;
struct hme_softc *sc;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
u_long start, count;
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
uint32_t burst;
int i, error = 0;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
hsc = device_get_softc(dev);
sc = &hsc->hsc_hme;
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
mtx_init(&sc->sc_lock, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
/*
* Map five register banks:
*
* bank 0: HME SEB registers
* bank 1: HME ETX registers
* bank 2: HME ERX registers
* bank 3: HME MAC registers
* bank 4: HME MIF registers
*
*/
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 0;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
hsc->hsc_seb_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
&i, RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_seb_res == NULL) {
device_printf(dev, "cannot map SEB registers\n");
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
error = ENXIO;
goto fail_mtx_res;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
}
sc->sc_sebt = rman_get_bustag(hsc->hsc_seb_res);
sc->sc_sebh = rman_get_bushandle(hsc->hsc_seb_res);
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 1;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
hsc->hsc_etx_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
&i, RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_etx_res == NULL) {
device_printf(dev, "cannot map ETX registers\n");
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
error = ENXIO;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_seb_res;
}
sc->sc_etxt = rman_get_bustag(hsc->hsc_etx_res);
sc->sc_etxh = rman_get_bushandle(hsc->hsc_etx_res);
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 2;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
hsc->hsc_erx_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
&i, RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_erx_res == NULL) {
device_printf(dev, "cannot map ERX registers\n");
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
error = ENXIO;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_etx_res;
}
sc->sc_erxt = rman_get_bustag(hsc->hsc_erx_res);
sc->sc_erxh = rman_get_bushandle(hsc->hsc_erx_res);
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 3;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
hsc->hsc_mac_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
&i, RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_mac_res == NULL) {
device_printf(dev, "cannot map MAC registers\n");
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
error = ENXIO;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_erx_res;
}
sc->sc_mact = rman_get_bustag(hsc->hsc_mac_res);
sc->sc_mach = rman_get_bushandle(hsc->hsc_mac_res);
/*
* At least on some HMEs, the MIF registers seem to be inside the MAC
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
* range, so try to kludge around it.
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
*/
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 4;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
hsc->hsc_mif_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
&i, RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_mif_res == NULL) {
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
if (bus_get_resource(dev, SYS_RES_MEMORY, i,
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
&start, &count) != 0) {
device_printf(dev, "cannot get MIF registers\n");
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
error = ENXIO;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_mac_res;
}
if (start < rman_get_start(hsc->hsc_mac_res) ||
start + count - 1 > rman_get_end(hsc->hsc_mac_res)) {
device_printf(dev, "cannot move MIF registers to MAC "
"bank\n");
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
error = ENXIO;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_mac_res;
}
sc->sc_mift = sc->sc_mact;
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
bus_space_subregion(sc->sc_mact, sc->sc_mach,
start - rman_get_start(hsc->hsc_mac_res), count,
&sc->sc_mifh);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
} else {
sc->sc_mift = rman_get_bustag(hsc->hsc_mif_res);
sc->sc_mifh = rman_get_bushandle(hsc->hsc_mif_res);
}
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
i = 0;
hsc->hsc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&i, RF_SHAREABLE | RF_ACTIVE);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if (hsc->hsc_ires == NULL) {
device_printf(dev, "could not allocate interrupt\n");
error = ENXIO;
goto fail_mif_res;
}
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
OF_getetheraddr(dev, sc->sc_enaddr);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
burst = sbus_get_burstsz(dev);
/* Translate into plain numerical format */
Implement TCP/UDP Transmit/Receive checksum offload. Since HME doesn't compensate the checksum for UDP datagram which can yield to 0x0, UDP transmit checksum offload is disabled by default. The UDP Transmit checksum offload can be reactivated by setting special link option link0 with ifconfig(8). Approved by: jake (mentor) Reviewed by: tmm Tested by: Herve Boulouis <amon@sockar.homeip.net>
2004-08-05 02:52:33 +00:00
if ((burst & SBUS_BURST_64))
sc->sc_burst = 64;
else if ((burst & SBUS_BURST_32))
sc->sc_burst = 32;
else if ((burst & SBUS_BURST_16))
sc->sc_burst = 16;
else
sc->sc_burst = 0;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
sc->sc_dev = dev;
o Disable HMEDEBUG by default. o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to legal values. o Use appropriate maxsize, nsegments and maxsegsize parameters when creating DMA tags and correct some comments related to them. o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite some time now so collapse calls accordingly. o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in hme_rint() and hme_start_locked(). o Keep state of the link state and use it to enable or disable the MAC in hme_mii_statchg() accordingly as well as to return early from hme_start_locked() in case the link is down. o Introduce a sc_flags and use it to replace individual members like sc_pci. o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(), hme_mii_writereg() and hme_stop() to ensure the respective bit has been written before we starting polling on it and for the right bits to change. o Rather just returning in case hme_mac_bitflip() fails and leaving us in an undefined state report the problem and move on; chances are the requested configuration will become active shortly after. o Don't call hme_start_locked() in hme_init_locked() unconditionally but only after calls to hme_init_locked() when it's appropriate, i.e. in hme_watchdog(). o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf(). o In hme_load_txmbuf(): - use a maximum of the newly introduced HME_NTXSEGS segments instead of the incorrect HME_NTXQ, which reflects the maximum TX queue length, for loading the mbufs and put the DMA segments back onto the stack instead of the softc as 16 should be ok there. - use the common errno(2) return values instead of homegrown ones, - given that hme_load_txmbuf() is allowed to fail resulting in a packet drop for quite some time now implement the functionality of hme_txcksum() by means of m_pullup(9), which de-obfuscates the code and allows to always retrieve the correct length of the IP header, [1] - also add a KASSERT which asserts nsegs is valid, - take advantage of m_collapse(9) instead of m_defrag(9) for performance reasons. o Don't bother to check whether the interface is running or whether its queue is empty before calling hme_start_locked() in hme_tint(), the former will check these anyway. o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may take quite a while to return when it calls hme_start_locked(). o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly. o Add a shadow sc_ifflags so we don't reset the chip when unnecessary. o Handle IFF_ALLMULTI correctly. [2] o Use PCIR_BAR instead of a homegrown macro. o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN]. o Use the maximum of 256 TX descriptors for better performance as using all of them has no additional static cost rather than using just half of them. Reported by: rwatson [2] Suggested by: yongari [1] Reviewed by: yongari MFC after: 1 month
2008-04-24 23:12:03 +00:00
sc->sc_flags = 0;
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
if ((error = hme_config(sc)) != 0) {
device_printf(dev, "could not be configured\n");
goto fail_ires;
}
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
if ((error = bus_setup_intr(dev, hsc->hsc_ires, INTR_TYPE_NET |
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
INTR_MPSAFE, NULL, hme_intr, sc, &hsc->hsc_ih)) != 0) {
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
device_printf(dev, "couldn't establish interrupt\n");
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
hme_detach(sc);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
goto fail_ires;
}
return (0);
fail_ires:
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(hsc->hsc_ires), hsc->hsc_ires);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
fail_mif_res:
if (hsc->hsc_mif_res != NULL) {
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_mif_res), hsc->hsc_mif_res);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
}
fail_mac_res:
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_mac_res), hsc->hsc_mac_res);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
fail_erx_res:
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_erx_res), hsc->hsc_erx_res);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
fail_etx_res:
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_etx_res), hsc->hsc_etx_res);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
fail_seb_res:
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_seb_res), hsc->hsc_seb_res);
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
fail_mtx_res:
mtx_destroy(&sc->sc_lock);
- Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1] - Properly use the error variable and return it on failure in the attach- routines. Reviewed by: tmm Inspired by: NetBSD [1]
2004-08-12 20:37:02 +00:00
return (error);
Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard in most machines of the Sun Ultra series. This is a port of the NetBSD driver which I enhanced to make use of the gather functionality and the configurable RX buffer offset to avoid copying all received/sent packet (instead, packets will be directly DMAd from mbuf chains and into mbuf clusters now).
2002-02-27 17:35:48 +00:00
}
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
static int
hme_sbus_detach(device_t dev)
{
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
struct hme_sbus_softc *hsc;
struct hme_softc *sc;
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
hsc = device_get_softc(dev);
sc = &hsc->hsc_hme;
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
bus_teardown_intr(dev, hsc->hsc_ires, hsc->hsc_ih);
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
hme_detach(sc);
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(hsc->hsc_ires), hsc->hsc_ires);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
if (hsc->hsc_mif_res != NULL) {
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_mif_res), hsc->hsc_mif_res);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
}
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_mac_res), hsc->hsc_mac_res);
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_erx_res), hsc->hsc_erx_res);
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_etx_res), hsc->hsc_etx_res);
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(hsc->hsc_seb_res), hsc->hsc_seb_res);
Make hme(4) mpsafe - Let hme_start()/hme_init() acquire lock and then call hme_start_locked()/hme_init_locked() respectivly. - Teardown interrupt handler before hme_detach(). - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE. - Set callout handler to CALLOUT_MPSAFE. - Add locks in hme MII interface. Reviewed by: jake Tested by: Julian C. Dunn <jdunn at opentrend dot net> MFC after: 2 weeks
2004-11-22 06:46:30 +00:00
mtx_destroy(&sc->sc_lock);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
return (0);
}
static int
hme_sbus_suspend(device_t dev)
{
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
struct hme_sbus_softc *hsc;
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
hsc = device_get_softc(dev);
hme_suspend(&hsc->hsc_hme);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
return (0);
}
static int
hme_sbus_resume(device_t dev)
{
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
struct hme_sbus_softc *hsc;
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
- Use the revamped code from the gem(4) PCI front-end, which doesn't require parts of the Expansion ROM to be copied around, for obtaining the MAC address on !OFW platforms. - Don't unnecessarily cache bus space tag and handle nor RIDs in the softcs of the front-ends. - Don't use function calls in initializers. - Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
hsc = device_get_softc(dev);
hme_resume(&hsc->hsc_hme);
Add detach, shutdown, suspend and resume methods. Tested by: jake
2003-01-09 00:45:10 +00:00
return (0);
}
Reference in New Issue Copy Permalink