1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
freebsd/contrib/tcpdump/print-sctp.c

818 lines
23 KiB
C
Raw Normal View History

/* Copyright (c) 2001 NETLAB, Temple University
* Copyright (c) 2001 Protocol Engineering Lab, University of Delaware
*
* Jerry Heinz <gheinz@astro.temple.edu>
* John Fiore <jfiore@joda.cis.temple.edu>
* Armando L. Caro Jr. <acaro@cis.udel.edu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the University nor of the Laboratory may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2017-01-31 19:17:06 +00:00
/* \summary: Stream Control Transmission Protocol (SCTP) printer */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
2017-01-31 19:17:06 +00:00
#include <netdissect-stdinc.h>
2017-01-31 19:17:06 +00:00
#include "netdissect.h"
#include "addrtoname.h"
2017-01-31 19:17:06 +00:00
#include "extract.h"
#include "ip.h"
#include "ip6.h"
2015-01-06 19:03:11 +00:00
/* Definitions from:
*
* SCTP reference Implementation Copyright (C) 1999 Cisco And Motorola
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of Cisco nor of Motorola may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the SCTP reference Implementation
*
*
* Please send any bug reports or fixes you make to one of the following email
* addresses:
*
* rstewar1@email.mot.com
* kmorneau@cisco.com
* qxie1@email.mot.com
*
* Any bugs reported given to us we will try to fix... any fixes shared will
* be incorperated into the next SCTP release.
*/
/* The valid defines for all message
* types know to SCTP. 0 is reserved
*/
#define SCTP_DATA 0x00
#define SCTP_INITIATION 0x01
#define SCTP_INITIATION_ACK 0x02
#define SCTP_SELECTIVE_ACK 0x03
#define SCTP_HEARTBEAT_REQUEST 0x04
#define SCTP_HEARTBEAT_ACK 0x05
#define SCTP_ABORT_ASSOCIATION 0x06
#define SCTP_SHUTDOWN 0x07
#define SCTP_SHUTDOWN_ACK 0x08
#define SCTP_OPERATION_ERR 0x09
#define SCTP_COOKIE_ECHO 0x0a
#define SCTP_COOKIE_ACK 0x0b
#define SCTP_ECN_ECHO 0x0c
#define SCTP_ECN_CWR 0x0d
#define SCTP_SHUTDOWN_COMPLETE 0x0e
#define SCTP_FORWARD_CUM_TSN 0xc0
#define SCTP_RELIABLE_CNTL 0xc1
#define SCTP_RELIABLE_CNTL_ACK 0xc2
static const struct tok sctp_chunkid_str[] = {
{ SCTP_DATA, "DATA" },
{ SCTP_INITIATION, "INIT" },
{ SCTP_INITIATION_ACK, "INIT ACK" },
{ SCTP_SELECTIVE_ACK, "SACK" },
{ SCTP_HEARTBEAT_REQUEST, "HB REQ" },
{ SCTP_HEARTBEAT_ACK, "HB ACK" },
{ SCTP_ABORT_ASSOCIATION, "ABORT" },
{ SCTP_SHUTDOWN, "SHUTDOWN" },
{ SCTP_SHUTDOWN_ACK, "SHUTDOWN ACK" },
{ SCTP_OPERATION_ERR, "OP ERR" },
{ SCTP_COOKIE_ECHO, "COOKIE ECHO" },
{ SCTP_COOKIE_ACK, "COOKIE ACK" },
{ SCTP_ECN_ECHO, "ECN ECHO" },
{ SCTP_ECN_CWR, "ECN CWR" },
{ SCTP_SHUTDOWN_COMPLETE, "SHUTDOWN COMPLETE" },
{ SCTP_FORWARD_CUM_TSN, "FOR CUM TSN" },
{ SCTP_RELIABLE_CNTL, "REL CTRL" },
{ SCTP_RELIABLE_CNTL_ACK, "REL CTRL ACK" },
{ 0, NULL }
};
/* Data Chuck Specific Flags */
#define SCTP_DATA_FRAG_MASK 0x03
#define SCTP_DATA_MIDDLE_FRAG 0x00
#define SCTP_DATA_LAST_FRAG 0x01
#define SCTP_DATA_FIRST_FRAG 0x02
#define SCTP_DATA_NOT_FRAG 0x03
#define SCTP_DATA_UNORDERED 0x04
#define SCTP_ADDRMAX 60
2012-05-14 08:01:48 +00:00
#define CHAN_HP 6704
#define CHAN_MP 6705
#define CHAN_LP 6706
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2015-01-06 19:03:11 +00:00
/* the sctp common header */
struct sctpHeader{
uint16_t source;
uint16_t destination;
uint32_t verificationTag;
uint32_t adler32;
};
/* various descriptor parsers */
struct sctpChunkDesc{
uint8_t chunkID;
uint8_t chunkFlg;
uint16_t chunkLength;
};
struct sctpParamDesc{
uint16_t paramType;
uint16_t paramLength;
};
struct sctpRelChunkDesc{
struct sctpChunkDesc chk;
uint32_t serialNumber;
};
struct sctpVendorSpecificParam {
struct sctpParamDesc p; /* type must be 0xfffe */
uint32_t vendorId; /* vendor ID from RFC 1700 */
uint16_t vendorSpecificType;
uint16_t vendorSpecificLen;
};
/* Structures for the control parts */
/* Sctp association init request/ack */
/* this is used for init ack, too */
struct sctpInitiation{
uint32_t initTag; /* tag of mine */
uint32_t rcvWindowCredit; /* rwnd */
uint16_t NumPreopenStreams; /* OS */
uint16_t MaxInboundStreams; /* MIS */
uint32_t initialTSN;
/* optional param's follow in sctpParamDesc form */
};
struct sctpV4IpAddress{
struct sctpParamDesc p; /* type is set to SCTP_IPV4_PARAM_TYPE, len=10 */
uint32_t ipAddress;
};
struct sctpV6IpAddress{
struct sctpParamDesc p; /* type is set to SCTP_IPV6_PARAM_TYPE, len=22 */
uint8_t ipAddress[16];
};
struct sctpDNSName{
struct sctpParamDesc param;
uint8_t name[1];
};
struct sctpCookiePreserve{
struct sctpParamDesc p; /* type is set to SCTP_COOKIE_PRESERVE, len=8 */
uint32_t extraTime;
};
struct sctpTimeStamp{
uint32_t ts_sec;
uint32_t ts_usec;
};
/* wire structure of my cookie */
struct cookieMessage{
uint32_t TieTag_curTag; /* copied from assoc if present */
uint32_t TieTag_hisTag; /* copied from assoc if present */
int32_t cookieLife; /* life I will award this cookie */
struct sctpTimeStamp timeEnteringState; /* the time I built cookie */
struct sctpInitiation initAckISent; /* the INIT-ACK that I sent to my peer */
uint32_t addressWhereISent[4]; /* I make this 4 ints so I get 128bits for future */
int32_t addrtype; /* address type */
uint16_t locScope; /* V6 local scope flag */
uint16_t siteScope; /* V6 site scope flag */
/* at the end is tacked on the INIT chunk sent in
* its entirety and of course our
* signature.
*/
};
/* this guy is for use when
* I have a initiate message gloming the
* things together.
*/
struct sctpUnifiedInit{
struct sctpChunkDesc uh;
struct sctpInitiation initm;
};
struct sctpSendableInit{
struct sctpHeader mh;
struct sctpUnifiedInit msg;
};
/* Selective Acknowledgement
* has the following structure with
* a optional ammount of trailing int's
* on the last part (based on the numberOfDesc
* field).
*/
struct sctpSelectiveAck{
uint32_t highestConseqTSN;
uint32_t updatedRwnd;
uint16_t numberOfdesc;
uint16_t numDupTsns;
};
struct sctpSelectiveFrag{
uint16_t fragmentStart;
uint16_t fragmentEnd;
};
struct sctpUnifiedSack{
struct sctpChunkDesc uh;
struct sctpSelectiveAck sack;
};
/* for both RTT request/response the
* following is sent
*/
struct sctpHBrequest {
uint32_t time_value_1;
uint32_t time_value_2;
};
/* here is what I read and respond with to. */
struct sctpHBunified{
struct sctpChunkDesc hdr;
struct sctpParamDesc hb;
};
/* here is what I send */
struct sctpHBsender{
struct sctpChunkDesc hdr;
struct sctpParamDesc hb;
struct sctpHBrequest rtt;
int8_t addrFmt[SCTP_ADDRMAX];
uint16_t userreq;
};
/* for the abort and shutdown ACK
* we must carry the init tag in the common header. Just the
* common header is all that is needed with a chunk descriptor.
*/
struct sctpUnifiedAbort{
struct sctpChunkDesc uh;
};
struct sctpUnifiedAbortLight{
struct sctpHeader mh;
struct sctpChunkDesc uh;
};
struct sctpUnifiedAbortHeavy{
struct sctpHeader mh;
struct sctpChunkDesc uh;
uint16_t causeCode;
uint16_t causeLen;
};
/* For the graceful shutdown we must carry
* the tag (in common header) and the highest consequitive acking value
*/
struct sctpShutdown {
uint32_t TSN_Seen;
};
struct sctpUnifiedShutdown{
struct sctpChunkDesc uh;
struct sctpShutdown shut;
};
/* in the unified message we add the trailing
* stream id since it is the only message
* that is defined as a operation error.
*/
struct sctpOpErrorCause{
uint16_t cause;
uint16_t causeLen;
};
struct sctpUnifiedOpError{
struct sctpChunkDesc uh;
struct sctpOpErrorCause c;
};
struct sctpUnifiedStreamError{
struct sctpHeader mh;
struct sctpChunkDesc uh;
struct sctpOpErrorCause c;
uint16_t strmNum;
uint16_t reserved;
};
struct staleCookieMsg{
struct sctpHeader mh;
struct sctpChunkDesc uh;
struct sctpOpErrorCause c;
uint32_t moretime;
};
/* the following is used in all sends
* where nothing is needed except the
* chunk/type i.e. shutdownAck Abort */
struct sctpUnifiedSingleMsg{
struct sctpHeader mh;
struct sctpChunkDesc uh;
};
struct sctpDataPart{
uint32_t TSN;
uint16_t streamId;
uint16_t sequence;
uint32_t payloadtype;
};
struct sctpUnifiedDatagram{
struct sctpChunkDesc uh;
struct sctpDataPart dp;
};
struct sctpECN_echo{
struct sctpChunkDesc uh;
uint32_t Lowest_TSN;
};
struct sctpCWR{
struct sctpChunkDesc uh;
uint32_t TSN_reduced_at;
};
static const struct tok ForCES_channels[] = {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ CHAN_HP, "ForCES HP" },
{ CHAN_MP, "ForCES MP" },
{ CHAN_LP, "ForCES LP" },
{ 0, NULL }
};
2015-01-06 19:03:11 +00:00
/* data chunk's payload protocol identifiers */
#define SCTP_PPID_IUA 1
#define SCTP_PPID_M2UA 2
#define SCTP_PPID_M3UA 3
#define SCTP_PPID_SUA 4
#define SCTP_PPID_M2PA 5
#define SCTP_PPID_V5UA 6
#define SCTP_PPID_H248 7
#define SCTP_PPID_BICC 8
#define SCTP_PPID_TALI 9
#define SCTP_PPID_DUA 10
#define SCTP_PPID_ASAP 11
#define SCTP_PPID_ENRP 12
#define SCTP_PPID_H323 13
#define SCTP_PPID_QIPC 14
#define SCTP_PPID_SIMCO 15
#define SCTP_PPID_DDPSC 16
#define SCTP_PPID_DDPSSC 17
#define SCTP_PPID_S1AP 18
#define SCTP_PPID_RUA 19
#define SCTP_PPID_HNBAP 20
#define SCTP_PPID_FORCES_HP 21
#define SCTP_PPID_FORCES_MP 22
#define SCTP_PPID_FORCES_LP 23
#define SCTP_PPID_SBC_AP 24
#define SCTP_PPID_NBAP 25
/* 26 */
#define SCTP_PPID_X2AP 27
static const struct tok PayloadProto_idents[] = {
{ SCTP_PPID_IUA, "ISDN Q.921" },
{ SCTP_PPID_M2UA, "M2UA" },
{ SCTP_PPID_M3UA, "M3UA" },
{ SCTP_PPID_SUA, "SUA" },
{ SCTP_PPID_M2PA, "M2PA" },
{ SCTP_PPID_V5UA, "V5.2" },
{ SCTP_PPID_H248, "H.248" },
{ SCTP_PPID_BICC, "BICC" },
{ SCTP_PPID_TALI, "TALI" },
{ SCTP_PPID_DUA, "DUA" },
{ SCTP_PPID_ASAP, "ASAP" },
{ SCTP_PPID_ENRP, "ENRP" },
{ SCTP_PPID_H323, "H.323" },
{ SCTP_PPID_QIPC, "Q.IPC" },
{ SCTP_PPID_SIMCO, "SIMCO" },
{ SCTP_PPID_DDPSC, "DDPSC" },
{ SCTP_PPID_DDPSSC, "DDPSSC" },
{ SCTP_PPID_S1AP, "S1AP" },
{ SCTP_PPID_RUA, "RUA" },
{ SCTP_PPID_HNBAP, "HNBAP" },
{ SCTP_PPID_FORCES_HP, "ForCES HP" },
{ SCTP_PPID_FORCES_MP, "ForCES MP" },
{ SCTP_PPID_FORCES_LP, "ForCES LP" },
{ SCTP_PPID_SBC_AP, "SBc-AP" },
{ SCTP_PPID_NBAP, "NBAP" },
/* 26 */
{ SCTP_PPID_X2AP, "X2AP" },
{ 0, NULL }
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
static inline int isForCES_port(u_short Port)
{
if (Port == CHAN_HP)
return 1;
if (Port == CHAN_MP)
return 1;
if (Port == CHAN_LP)
return 1;
return 0;
}
2015-01-06 19:03:11 +00:00
void sctp_print(netdissect_options *ndo,
const u_char *bp, /* beginning of sctp packet */
const u_char *bp2, /* beginning of enclosing */
u_int sctpPacketLength) /* ip packet */
{
2017-01-31 19:17:06 +00:00
u_int sctpPacketLengthRemaining;
const struct sctpHeader *sctpPktHdr;
const struct ip *ip;
const struct ip6_hdr *ip6;
u_short sourcePort, destPort;
int chunkCount;
const struct sctpChunkDesc *chunkDescPtr;
const char *sep;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
int isforces = 0;
if (sctpPacketLength < sizeof(struct sctpHeader))
{
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "truncated-sctp - %ld bytes missing!",
2017-01-31 19:17:06 +00:00
(long)(sizeof(struct sctpHeader) - sctpPacketLength)));
return;
}
2017-01-31 19:17:06 +00:00
sctpPktHdr = (const struct sctpHeader*) bp;
ND_TCHECK(*sctpPktHdr);
sctpPacketLengthRemaining = sctpPacketLength;
sourcePort = EXTRACT_16BITS(&sctpPktHdr->source);
destPort = EXTRACT_16BITS(&sctpPktHdr->destination);
2017-01-31 19:17:06 +00:00
ip = (const struct ip *)bp2;
if (IP_V(ip) == 6)
ip6 = (const struct ip6_hdr *)bp2;
else
ip6 = NULL;
if (ip6) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s.%d > %s.%d: sctp",
ip6addr_string(ndo, &ip6->ip6_src),
sourcePort,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, &ip6->ip6_dst),
destPort));
} else
{
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s.%d > %s.%d: sctp",
ipaddr_string(ndo, &ip->ip_src),
sourcePort,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, &ip->ip_dst),
destPort));
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (isForCES_port(sourcePort)) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[%s]", tok2str(ForCES_channels, NULL, sourcePort)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
isforces = 1;
}
if (isForCES_port(destPort)) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[%s]", tok2str(ForCES_channels, NULL, destPort)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
isforces = 1;
}
2017-01-31 19:17:06 +00:00
bp += sizeof(struct sctpHeader);
sctpPacketLengthRemaining -= sizeof(struct sctpHeader);
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag >= 2)
sep = "\n\t";
else
sep = " (";
/* cycle through all chunks, printing information on each one */
2017-01-31 19:17:06 +00:00
for (chunkCount = 0, chunkDescPtr = (const struct sctpChunkDesc *)bp;
sctpPacketLengthRemaining != 0;
chunkCount++)
{
2017-01-31 19:17:06 +00:00
uint16_t chunkLength, chunkLengthRemaining;
2015-01-06 19:03:11 +00:00
uint16_t align;
2017-01-31 19:17:06 +00:00
chunkDescPtr = (const struct sctpChunkDesc *)bp;
if (sctpPacketLengthRemaining < sizeof(*chunkDescPtr)) {
ND_PRINT((ndo, "%s%d) [chunk descriptor cut off at end of packet]", sep, chunkCount+1));
break;
}
2015-01-06 19:03:11 +00:00
ND_TCHECK(*chunkDescPtr);
chunkLength = EXTRACT_16BITS(&chunkDescPtr->chunkLength);
if (chunkLength < sizeof(*chunkDescPtr)) {
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "%s%d) [Bad chunk length %u, < size of chunk descriptor]", sep, chunkCount+1, chunkLength));
2015-01-06 19:03:11 +00:00
break;
}
2017-01-31 19:17:06 +00:00
chunkLengthRemaining = chunkLength;
2017-01-31 19:17:06 +00:00
align = chunkLength % 4;
if (align != 0)
align = 4 - align;
2017-01-31 19:17:06 +00:00
if (sctpPacketLengthRemaining < align) {
ND_PRINT((ndo, "%s%d) [Bad chunk length %u, > remaining data in packet]", sep, chunkCount+1, chunkLength));
break;
}
ND_TCHECK2(*bp, chunkLength);
bp += sizeof(*chunkDescPtr);
sctpPacketLengthRemaining -= sizeof(*chunkDescPtr);
chunkLengthRemaining -= sizeof(*chunkDescPtr);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s%d) ", sep, chunkCount+1));
ND_PRINT((ndo, "[%s] ", tok2str(sctp_chunkid_str, "Unknown chunk type: 0x%x",
chunkDescPtr->chunkID)));
switch (chunkDescPtr->chunkID)
{
case SCTP_DATA :
{
const struct sctpDataPart *dataHdrPtr;
2015-01-06 19:03:11 +00:00
uint32_t ppid;
u_int payload_size;
if ((chunkDescPtr->chunkFlg & SCTP_DATA_UNORDERED)
== SCTP_DATA_UNORDERED)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "(U)"));
if ((chunkDescPtr->chunkFlg & SCTP_DATA_FIRST_FRAG)
== SCTP_DATA_FIRST_FRAG)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "(B)"));
if ((chunkDescPtr->chunkFlg & SCTP_DATA_LAST_FRAG)
== SCTP_DATA_LAST_FRAG)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "(E)"));
if( ((chunkDescPtr->chunkFlg & SCTP_DATA_UNORDERED)
== SCTP_DATA_UNORDERED)
||
((chunkDescPtr->chunkFlg & SCTP_DATA_FIRST_FRAG)
== SCTP_DATA_FIRST_FRAG)
||
((chunkDescPtr->chunkFlg & SCTP_DATA_LAST_FRAG)
== SCTP_DATA_LAST_FRAG) )
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " "));
2017-01-31 19:17:06 +00:00
if (chunkLengthRemaining < sizeof(*dataHdrPtr)) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
dataHdrPtr=(const struct sctpDataPart*)bp;
2015-01-06 19:03:11 +00:00
ppid = EXTRACT_32BITS(&dataHdrPtr->payloadtype);
ND_PRINT((ndo, "[TSN: %u] ", EXTRACT_32BITS(&dataHdrPtr->TSN)));
ND_PRINT((ndo, "[SID: %u] ", EXTRACT_16BITS(&dataHdrPtr->streamId)));
ND_PRINT((ndo, "[SSEQ %u] ", EXTRACT_16BITS(&dataHdrPtr->sequence)));
ND_PRINT((ndo, "[PPID %s] ",
tok2str(PayloadProto_idents, "0x%x", ppid)));
if (!isforces) {
isforces = (ppid == SCTP_PPID_FORCES_HP) ||
(ppid == SCTP_PPID_FORCES_MP) ||
(ppid == SCTP_PPID_FORCES_LP);
}
2017-01-31 19:17:06 +00:00
bp += sizeof(*dataHdrPtr);
sctpPacketLengthRemaining -= sizeof(*dataHdrPtr);
chunkLengthRemaining -= sizeof(*dataHdrPtr);
payload_size = chunkLengthRemaining;
if (payload_size == 0) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
2015-01-06 19:03:11 +00:00
return;
}
if (isforces) {
2017-01-31 19:17:06 +00:00
forces_print(ndo, bp, payload_size);
2015-01-06 19:03:11 +00:00
} else if (ndo->ndo_vflag >= 2) { /* if verbose output is specified */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
/* at the command line */
2015-01-06 19:03:11 +00:00
switch (ppid) {
case SCTP_PPID_M3UA :
2017-01-31 19:17:06 +00:00
m3ua_print(ndo, bp, payload_size);
2015-01-06 19:03:11 +00:00
break;
default:
ND_PRINT((ndo, "[Payload"));
if (!ndo->ndo_suppress_default_print) {
ND_PRINT((ndo, ":"));
2017-01-31 19:17:06 +00:00
ND_DEFAULTPRINT(bp, payload_size);
}
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "]"));
break;
}
}
2017-01-31 19:17:06 +00:00
bp += payload_size;
sctpPacketLengthRemaining -= payload_size;
chunkLengthRemaining -= payload_size;
break;
}
case SCTP_INITIATION :
{
const struct sctpInitiation *init;
2017-01-31 19:17:06 +00:00
if (chunkLengthRemaining < sizeof(*init)) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
init=(const struct sctpInitiation*)bp;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[init tag: %u] ", EXTRACT_32BITS(&init->initTag)));
ND_PRINT((ndo, "[rwnd: %u] ", EXTRACT_32BITS(&init->rcvWindowCredit)));
ND_PRINT((ndo, "[OS: %u] ", EXTRACT_16BITS(&init->NumPreopenStreams)));
ND_PRINT((ndo, "[MIS: %u] ", EXTRACT_16BITS(&init->MaxInboundStreams)));
ND_PRINT((ndo, "[init TSN: %u] ", EXTRACT_32BITS(&init->initialTSN)));
2017-01-31 19:17:06 +00:00
bp += sizeof(*init);
sctpPacketLengthRemaining -= sizeof(*init);
chunkLengthRemaining -= sizeof(*init);
2017-01-31 19:17:06 +00:00
#if 0 /* ALC you can add code for optional params here */
if( chunkLengthRemaining != 0 )
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " @@@@@ UNFINISHED @@@@@@%s\n",
"Optional params present, but not printed."));
#endif
2017-01-31 19:17:06 +00:00
bp += chunkLengthRemaining;
sctpPacketLengthRemaining -= chunkLengthRemaining;
chunkLengthRemaining = 0;
break;
}
case SCTP_INITIATION_ACK :
{
const struct sctpInitiation *init;
2017-01-31 19:17:06 +00:00
if (chunkLengthRemaining < sizeof(*init)) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
init=(const struct sctpInitiation*)bp;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[init tag: %u] ", EXTRACT_32BITS(&init->initTag)));
ND_PRINT((ndo, "[rwnd: %u] ", EXTRACT_32BITS(&init->rcvWindowCredit)));
ND_PRINT((ndo, "[OS: %u] ", EXTRACT_16BITS(&init->NumPreopenStreams)));
ND_PRINT((ndo, "[MIS: %u] ", EXTRACT_16BITS(&init->MaxInboundStreams)));
ND_PRINT((ndo, "[init TSN: %u] ", EXTRACT_32BITS(&init->initialTSN)));
2017-01-31 19:17:06 +00:00
bp += sizeof(*init);
sctpPacketLengthRemaining -= sizeof(*init);
chunkLengthRemaining -= sizeof(*init);
2017-01-31 19:17:06 +00:00
#if 0 /* ALC you can add code for optional params here */
if( chunkLengthRemaining != 0 )
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " @@@@@ UNFINISHED @@@@@@%s\n",
"Optional params present, but not printed."));
#endif
2017-01-31 19:17:06 +00:00
bp += chunkLengthRemaining;
sctpPacketLengthRemaining -= chunkLengthRemaining;
chunkLengthRemaining = 0;
break;
}
case SCTP_SELECTIVE_ACK:
{
const struct sctpSelectiveAck *sack;
const struct sctpSelectiveFrag *frag;
int fragNo, tsnNo;
const u_char *dupTSN;
2017-01-31 19:17:06 +00:00
if (chunkLengthRemaining < sizeof(*sack)) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
sack=(const struct sctpSelectiveAck*)bp;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[cum ack %u] ", EXTRACT_32BITS(&sack->highestConseqTSN)));
ND_PRINT((ndo, "[a_rwnd %u] ", EXTRACT_32BITS(&sack->updatedRwnd)));
ND_PRINT((ndo, "[#gap acks %u] ", EXTRACT_16BITS(&sack->numberOfdesc)));
ND_PRINT((ndo, "[#dup tsns %u] ", EXTRACT_16BITS(&sack->numDupTsns)));
2017-01-31 19:17:06 +00:00
bp += sizeof(*sack);
sctpPacketLengthRemaining -= sizeof(*sack);
chunkLengthRemaining -= sizeof(*sack);
/* print gaps */
2017-01-31 19:17:06 +00:00
for (fragNo=0;
chunkLengthRemaining != 0 && fragNo < EXTRACT_16BITS(&sack->numberOfdesc);
bp += sizeof(*frag), sctpPacketLengthRemaining -= sizeof(*frag), chunkLengthRemaining -= sizeof(*frag), fragNo++) {
if (chunkLengthRemaining < sizeof(*frag)) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
frag = (const struct sctpSelectiveFrag *)bp;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\t[gap ack block #%d: start = %u, end = %u] ",
fragNo+1,
EXTRACT_32BITS(&sack->highestConseqTSN) + EXTRACT_16BITS(&frag->fragmentStart),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(&sack->highestConseqTSN) + EXTRACT_16BITS(&frag->fragmentEnd)));
2017-01-31 19:17:06 +00:00
}
/* print duplicate TSNs */
2017-01-31 19:17:06 +00:00
for (tsnNo=0;
chunkLengthRemaining != 0 && tsnNo<EXTRACT_16BITS(&sack->numDupTsns);
bp += 4, sctpPacketLengthRemaining -= 4, chunkLengthRemaining -= 4, tsnNo++) {
if (chunkLengthRemaining < 4) {
ND_PRINT((ndo, "bogus chunk length %u]", chunkLength));
return;
}
dupTSN = (const u_char *)bp;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\t[dup TSN #%u: %u] ", tsnNo+1,
2017-01-31 19:17:06 +00:00
EXTRACT_32BITS(dupTSN)));
}
break;
}
default :
{
bp += chunkLengthRemaining;
sctpPacketLengthRemaining -= chunkLengthRemaining;
chunkLengthRemaining = 0;
break;
}
}
2017-01-31 19:17:06 +00:00
/*
* Any extra stuff at the end of the chunk?
* XXX - report this?
*/
bp += chunkLengthRemaining;
sctpPacketLengthRemaining -= chunkLengthRemaining;
if (ndo->ndo_vflag < 2)
sep = ", (";
if (align != 0) {
/*
* Fail if the alignment padding isn't in the captured data.
* Otherwise, skip it.
*/
ND_TCHECK2(*bp, align);
bp += align;
sctpPacketLengthRemaining -= align;
}
}
return;
trunc:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[|sctp]"));
}