1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/sys/kern/kern_intr.c

653 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*
*/
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/rtprio.h>
#include <sys/systm.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/random.h>
#include <sys/resourcevar.h>
#include <sys/sysctl.h>
#include <sys/unistd.h>
#include <sys/vmmeter.h>
#include <machine/atomic.h>
#include <machine/cpu.h>
#include <machine/md_var.h>
#include <machine/stdarg.h>
#include <net/netisr.h> /* prototype for legacy_setsoftnet */
struct int_entropy {
struct proc *proc;
int vector;
};
void *net_ih;
void *vm_ih;
void *softclock_ih;
struct ithd *clk_ithd;
struct ithd *tty_ithd;
static MALLOC_DEFINE(M_ITHREAD, "ithread", "Interrupt Threads");
static void ithread_update(struct ithd *);
static void ithread_loop(void *);
static void start_softintr(void *);
static void swi_net(void *);
u_char
ithread_priority(enum intr_type flags)
{
u_char pri;
flags &= (INTR_TYPE_TTY | INTR_TYPE_BIO | INTR_TYPE_NET |
INTR_TYPE_CAM | INTR_TYPE_MISC | INTR_TYPE_CLK);
switch (flags) {
case INTR_TYPE_TTY:
pri = PI_TTYLOW;
break;
case INTR_TYPE_BIO:
/*
* XXX We need to refine this. BSD/OS distinguishes
* between tape and disk priorities.
*/
pri = PI_DISK;
break;
case INTR_TYPE_NET:
pri = PI_NET;
break;
case INTR_TYPE_CAM:
pri = PI_DISK; /* XXX or PI_CAM? */
break;
case INTR_TYPE_CLK:
pri = PI_REALTIME;
break;
case INTR_TYPE_MISC:
pri = PI_DULL; /* don't care */
break;
default:
/* We didn't specify an interrupt level. */
panic("ithread_priority: no interrupt type in flags");
}
return pri;
}
/*
* Regenerate the name (p_comm) and priority for a threaded interrupt thread.
*/
static void
ithread_update(struct ithd *ithd)
{
struct intrhand *ih;
struct proc *p;
int entropy;
mtx_assert(&ithd->it_lock, MA_OWNED);
p = ithd->it_proc;
if (p == NULL)
return;
strncpy(p->p_comm, ithd->it_name, sizeof(ithd->it_name));
ih = TAILQ_FIRST(&ithd->it_handlers);
if (ih == NULL) {
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
p->p_pri.pri_level = PRI_MAX_ITHD;
ithd->it_flags &= ~IT_ENTROPY;
return;
}
entropy = 0;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
p->p_pri.pri_level = ih->ih_pri;
p->p_pri.pri_native = ih->ih_pri;
TAILQ_FOREACH(ih, &ithd->it_handlers, ih_next) {
if (strlen(p->p_comm) + strlen(ih->ih_name) + 1 <
sizeof(p->p_comm)) {
strcat(p->p_comm, " ");
strcat(p->p_comm, ih->ih_name);
} else if (strlen(p->p_comm) + 1 == sizeof(p->p_comm)) {
if (p->p_comm[sizeof(p->p_comm) - 2] == '+')
p->p_comm[sizeof(p->p_comm) - 2] = '*';
else
p->p_comm[sizeof(p->p_comm) - 2] = '+';
} else
strcat(p->p_comm, "+");
if (ih->ih_flags & IH_ENTROPY)
entropy++;
}
if (entropy)
ithd->it_flags |= IT_ENTROPY;
else
ithd->it_flags &= ~IT_ENTROPY;
CTR1(KTR_INTR, __func__ ": updated %s\n", p->p_comm);
}
int
ithread_create(struct ithd **ithread, int vector, int flags,
void (*disable)(int), void (*enable)(int), const char *fmt, ...)
{
struct ithd *ithd;
struct proc *p;
int error;
va_list ap;
/* The only valid flag during creation is IT_SOFT. */
if ((flags & ~IT_SOFT) != 0)
return (EINVAL);
ithd = malloc(sizeof(struct ithd), M_ITHREAD, M_WAITOK | M_ZERO);
ithd->it_vector = vector;
ithd->it_disable = disable;
ithd->it_enable = enable;
ithd->it_flags = flags;
TAILQ_INIT(&ithd->it_handlers);
mtx_init(&ithd->it_lock, "ithread", MTX_DEF);
mtx_lock(&ithd->it_lock);
va_start(ap, fmt);
vsnprintf(ithd->it_name, sizeof(ithd->it_name), fmt, ap);
va_end(ap);
error = kthread_create(ithread_loop, ithd, &p, RFSTOPPED | RFHIGHPID,
"%s", ithd->it_name);
if (error) {
mtx_destroy(&ithd->it_lock);
free(ithd, M_ITHREAD);
return (error);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
p->p_pri.pri_class = PRI_ITHD;
p->p_pri.pri_level = PRI_MAX_ITHD;
p->p_stat = SWAIT;
ithd->it_proc = p;
p->p_ithd = ithd;
if (ithread != NULL)
*ithread = ithd;
mtx_unlock(&ithd->it_lock);
CTR1(KTR_INTR, __func__ ": created %s", ithd->it_name);
return (0);
}
int
ithread_destroy(struct ithd *ithread)
{
if (ithread == NULL)
return (EINVAL);
mtx_lock(&ithread->it_lock);
if (!TAILQ_EMPTY(&ithread->it_handlers)) {
mtx_unlock(&ithread->it_lock);
return (EINVAL);
}
ithread->it_flags |= IT_DEAD;
mtx_lock_spin(&sched_lock);
if (ithread->it_proc->p_stat == SWAIT) {
ithread->it_proc->p_stat = SRUN;
setrunqueue(ithread->it_proc);
}
mtx_unlock_spin(&sched_lock);
mtx_unlock(&ithread->it_lock);
CTR1(KTR_INTR, __func__ ": killing %s", ithread->it_name);
return (0);
}
int
ithread_add_handler(struct ithd* ithread, const char *name,
driver_intr_t handler, void *arg, u_char pri, enum intr_type flags,
void **cookiep)
{
struct intrhand *ih, *temp_ih;
if (ithread == NULL || name == NULL || handler == NULL)
return (EINVAL);
if ((flags & INTR_FAST) !=0)
flags |= INTR_EXCL;
ih = malloc(sizeof(struct intrhand), M_ITHREAD, M_WAITOK | M_ZERO);
ih->ih_handler = handler;
ih->ih_argument = arg;
ih->ih_name = name;
ih->ih_ithread = ithread;
ih->ih_pri = pri;
if (flags & INTR_FAST)
ih->ih_flags = IH_FAST | IH_EXCLUSIVE;
else if (flags & INTR_EXCL)
ih->ih_flags = IH_EXCLUSIVE;
if (flags & INTR_MPSAFE)
ih->ih_flags |= IH_MPSAFE;
if (flags & INTR_ENTROPY)
ih->ih_flags |= IH_ENTROPY;
mtx_lock(&ithread->it_lock);
if ((flags & INTR_EXCL) !=0 && !TAILQ_EMPTY(&ithread->it_handlers))
goto fail;
if (!TAILQ_EMPTY(&ithread->it_handlers) &&
(TAILQ_FIRST(&ithread->it_handlers)->ih_flags & IH_EXCLUSIVE) != 0)
goto fail;
TAILQ_FOREACH(temp_ih, &ithread->it_handlers, ih_next)
if (temp_ih->ih_pri > ih->ih_pri)
break;
if (temp_ih == NULL)
TAILQ_INSERT_TAIL(&ithread->it_handlers, ih, ih_next);
else
TAILQ_INSERT_BEFORE(temp_ih, ih, ih_next);
ithread_update(ithread);
mtx_unlock(&ithread->it_lock);
if (cookiep != NULL)
*cookiep = ih;
CTR2(KTR_INTR, __func__ ": added %s to %s", ih->ih_name,
ithread->it_name);
return (0);
fail:
mtx_unlock(&ithread->it_lock);
free(ih, M_ITHREAD);
return (EINVAL);
}
int
ithread_remove_handler(void *cookie)
{
struct intrhand *handler = (struct intrhand *)cookie;
struct ithd *ithread;
#ifdef INVARIANTS
struct intrhand *ih;
#endif
if (handler == NULL)
return (EINVAL);
ithread = handler->ih_ithread;
KASSERT(ithread != NULL,
("interrupt handler \"%s\" has a NULL interrupt thread",
handler->ih_name));
CTR2(KTR_INTR, __func__ ": removing %s from %s", handler->ih_name,
ithread->it_name);
mtx_lock(&ithread->it_lock);
#ifdef INVARIANTS
TAILQ_FOREACH(ih, &ithread->it_handlers, ih_next)
if (ih == handler)
goto ok;
mtx_unlock(&ithread->it_lock);
panic("interrupt handler \"%s\" not found in interrupt thread \"%s\"",
ih->ih_name, ithread->it_name);
ok:
#endif
/*
* If the interrupt thread is already running, then just mark this
* handler as being dead and let the ithread do the actual removal.
*/
mtx_lock_spin(&sched_lock);
if (ithread->it_proc->p_stat != SWAIT) {
handler->ih_flags |= IH_DEAD;
/*
* Ensure that the thread will process the handler list
* again and remove this handler if it has already passed
* it on the list.
*/
ithread->it_need = 1;
} else
TAILQ_REMOVE(&ithread->it_handlers, handler, ih_next);
mtx_unlock_spin(&sched_lock);
if ((handler->ih_flags & IH_DEAD) != 0)
msleep(handler, &ithread->it_lock, PUSER, "itrmh", 0);
ithread_update(ithread);
mtx_unlock(&ithread->it_lock);
free(handler, M_ITHREAD);
return (0);
}
int
ithread_schedule(struct ithd *ithread, int do_switch)
{
struct int_entropy entropy;
struct proc *p;
critical_t savecrit;
/*
* If no ithread or no handlers, then we have a stray interrupt.
*/
if ((ithread == NULL) || TAILQ_EMPTY(&ithread->it_handlers))
return (EINVAL);
/*
* If any of the handlers for this ithread claim to be good
* sources of entropy, then gather some.
*/
if (harvest.interrupt && ithread->it_flags & IT_ENTROPY) {
entropy.vector = ithread->it_vector;
entropy.proc = CURPROC;
random_harvest(&entropy, sizeof(entropy), 2, 0,
RANDOM_INTERRUPT);
}
p = ithread->it_proc;
KASSERT(p != NULL, ("ithread %s has no process", ithread->it_name));
CTR3(KTR_INTR, __func__ ": pid %d: (%s) need = %d", p->p_pid, p->p_comm,
ithread->it_need);
/*
* Set it_need to tell the thread to keep running if it is already
* running. Then, grab sched_lock and see if we actually need to
* put this thread on the runqueue. If so and the do_switch flag is
* true, then switch to the ithread immediately. Otherwise, use
* need_resched() to guarantee that this ithread will run before any
* userland processes.
*/
ithread->it_need = 1;
mtx_lock_spin(&sched_lock);
if (p->p_stat == SWAIT) {
CTR1(KTR_INTR, __func__ ": setrunqueue %d", p->p_pid);
p->p_stat = SRUN;
setrunqueue(p);
if (do_switch && curproc->p_stat == SRUN) {
savecrit = sched_lock.mtx_savecrit;
mtx_intr_enable(&sched_lock);
if (curproc != PCPU_GET(idleproc))
setrunqueue(curproc);
curproc->p_stats->p_ru.ru_nvcsw++;
mi_switch();
sched_lock.mtx_savecrit = savecrit;
} else
Overhaul of the SMP code. Several portions of the SMP kernel support have been made machine independent and various other adjustments have been made to support Alpha SMP. - It splits the per-process portions of hardclock() and statclock() off into hardclock_process() and statclock_process() respectively. hardclock() and statclock() call the *_process() functions for the current process so that UP systems will run as before. For SMP systems, it is simply necessary to ensure that all other processors execute the *_process() functions when the main clock functions are triggered on one CPU by an interrupt. For the alpha 4100, clock interrupts are delievered in a staggered broadcast fashion, so we simply call hardclock/statclock on the boot CPU and call the *_process() functions on the secondaries. For x86, we call statclock and hardclock as usual and then call forward_hardclock/statclock in the MD code to send an IPI to cause the AP's to execute forwared_hardclock/statclock which then call the *_process() functions. - forward_signal() and forward_roundrobin() have been reworked to be MI and to involve less hackery. Now the cpu doing the forward sets any flags, etc. and sends a very simple IPI_AST to the other cpu(s). AST IPIs now just basically return so that they can execute ast() and don't bother with setting the astpending or needresched flags themselves. This also removes the loop in forward_signal() as sched_lock closes the race condition that the loop worked around. - need_resched(), resched_wanted() and clear_resched() have been changed to take a process to act on rather than assuming curproc so that they can be used to implement forward_roundrobin() as described above. - Various other SMP variables have been moved to a MI subr_smp.c and a new header sys/smp.h declares MI SMP variables and API's. The IPI API's from machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h. - The globaldata_register() and globaldata_find() functions as well as the SLIST of globaldata structures has become MI and moved into subr_smp.c. Also, the globaldata list is only available if SMP support is compiled in. Reviewed by: jake, peter Looked over by: eivind
2001-04-27 19:28:25 +00:00
need_resched(curproc);
} else {
CTR3(KTR_INTR, __func__ ": pid %d: it_need %d, state %d",
p->p_pid, ithread->it_need, p->p_stat);
}
mtx_unlock_spin(&sched_lock);
return (0);
}
int
swi_add(struct ithd **ithdp, const char *name, driver_intr_t handler,
void *arg, int pri, enum intr_type flags, void **cookiep)
{
struct ithd *ithd;
int error;
if (flags & (INTR_FAST | INTR_ENTROPY))
return (EINVAL);
ithd = (ithdp != NULL) ? *ithdp : NULL;
if (ithd != NULL) {
if ((ithd->it_flags & IT_SOFT) == 0)
return(EINVAL);
} else {
error = ithread_create(&ithd, pri, IT_SOFT, NULL, NULL,
"swi%d:", pri);
if (error)
return (error);
if (ithdp != NULL)
*ithdp = ithd;
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
return (ithread_add_handler(ithd, name, handler, arg,
(pri * RQ_PPQ) + PI_SOFT, flags, cookiep));
}
/*
* Schedule a heavyweight software interrupt process.
*/
void
swi_sched(void *cookie, int flags)
{
struct intrhand *ih = (struct intrhand *)cookie;
struct ithd *it = ih->ih_ithread;
int error;
atomic_add_int(&cnt.v_intr, 1); /* one more global interrupt */
CTR3(KTR_INTR, "swi_sched pid %d(%s) need=%d",
it->it_proc->p_pid, it->it_proc->p_comm, it->it_need);
/*
* Set ih_need for this handler so that if the ithread is already
* running it will execute this handler on the next pass. Otherwise,
* it will execute it the next time it runs.
*/
atomic_store_rel_int(&ih->ih_need, 1);
if (!(flags & SWI_DELAY)) {
error = ithread_schedule(it, !cold && flags & SWI_SWITCH);
KASSERT(error == 0, ("stray software interrupt"));
}
}
/*
* This is the main code for interrupt threads.
*/
void
ithread_loop(void *arg)
{
struct ithd *ithd; /* our thread context */
struct intrhand *ih; /* and our interrupt handler chain */
struct proc *p;
p = curproc;
ithd = (struct ithd *)arg; /* point to myself */
KASSERT(ithd->it_proc == p && p->p_ithd == ithd,
(__func__ ": ithread and proc linkage out of sync"));
/*
* As long as we have interrupts outstanding, go through the
* list of handlers, giving each one a go at it.
*/
for (;;) {
/*
* If we are an orphaned thread, then just die.
*/
if (ithd->it_flags & IT_DEAD) {
CTR2(KTR_INTR, __func__ ": pid %d: (%s) exiting",
p->p_pid, p->p_comm);
p->p_ithd = NULL;
mtx_destroy(&ithd->it_lock);
mtx_lock(&Giant);
free(ithd, M_ITHREAD);
kthread_exit(0);
}
CTR3(KTR_INTR, __func__ ": pid %d: (%s) need=%d",
p->p_pid, p->p_comm, ithd->it_need);
while (ithd->it_need) {
/*
* Service interrupts. If another interrupt
* arrives while we are running, they will set
* it_need to denote that we should make
* another pass.
*/
atomic_store_rel_int(&ithd->it_need, 0);
restart:
TAILQ_FOREACH(ih, &ithd->it_handlers, ih_next) {
if (ithd->it_flags & IT_SOFT && !ih->ih_need)
continue;
atomic_store_rel_int(&ih->ih_need, 0);
CTR5(KTR_INTR,
__func__ ": pid %d ih=%p: %p(%p) flg=%x",
p->p_pid, (void *)ih,
(void *)ih->ih_handler, ih->ih_argument,
ih->ih_flags);
if ((ih->ih_flags & IH_DEAD) != 0) {
mtx_lock(&ithd->it_lock);
TAILQ_REMOVE(&ithd->it_handlers, ih,
ih_next);
wakeup(ih);
mtx_unlock(&ithd->it_lock);
goto restart;
}
if ((ih->ih_flags & IH_MPSAFE) == 0)
mtx_lock(&Giant);
ih->ih_handler(ih->ih_argument);
if ((ih->ih_flags & IH_MPSAFE) == 0)
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&Giant);
}
}
/*
* Processed all our interrupts. Now get the sched
* lock. This may take a while and it_need may get
* set again, so we have to check it again.
*/
mtx_assert(&Giant, MA_NOTOWNED);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
if (!ithd->it_need) {
/*
* Should we call this earlier in the loop above?
*/
if (ithd->it_enable != NULL)
ithd->it_enable(ithd->it_vector);
p->p_stat = SWAIT; /* we're idle */
CTR1(KTR_INTR, __func__ ": pid %d: done", p->p_pid);
mi_switch();
CTR1(KTR_INTR, __func__ ": pid %d: resumed", p->p_pid);
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
}
}
/*
* Start standard software interrupt threads
*/
static void
start_softintr(void *dummy)
{
if (swi_add(NULL, "net", swi_net, NULL, SWI_NET, 0, &net_ih) ||
swi_add(&clk_ithd, "clock", softclock, NULL, SWI_CLOCK,
INTR_MPSAFE, &softclock_ih) ||
swi_add(NULL, "vm", swi_vm, NULL, SWI_VM, 0, &vm_ih))
panic("died while creating standard software ithreads");
PROC_LOCK(clk_ithd->it_proc);
clk_ithd->it_proc->p_flag |= P_NOLOAD;
PROC_UNLOCK(clk_ithd->it_proc);
}
SYSINIT(start_softintr, SI_SUB_SOFTINTR, SI_ORDER_FIRST, start_softintr, NULL)
void
legacy_setsoftnet(void)
{
swi_sched(net_ih, SWI_NOSWITCH);
}
/*
* XXX: This should really be in the network code somewhere and installed
* via a SI_SUB_SOFINTR, SI_ORDER_MIDDLE sysinit.
*/
void (*netisrs[32]) __P((void));
u_int netisr;
int
register_netisr(num, handler)
int num;
netisr_t *handler;
{
if (num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs)) ) {
printf("register_netisr: bad isr number: %d\n", num);
return (EINVAL);
}
netisrs[num] = handler;
return (0);
}
int
unregister_netisr(num)
int num;
{
if (num < 0 || num >= (sizeof(netisrs)/sizeof(*netisrs)) ) {
printf("unregister_netisr: bad isr number: %d\n", num);
return (EINVAL);
}
netisrs[num] = NULL;
return (0);
}
static void
swi_net(void *dummy)
{
u_int bits;
int i;
bits = atomic_readandclear_int(&netisr);
while ((i = ffs(bits)) != 0) {
i--;
if (netisrs[i] != NULL)
netisrs[i]();
else
printf("swi_net: unregistered isr number: %d.\n", i);
bits &= ~(1 << i);
}
}
/*
* Sysctls used by systat and others: hw.intrnames and hw.intrcnt.
* The data for this machine dependent, and the declarations are in machine
* dependent code. The layout of intrnames and intrcnt however is machine
* independent.
*
* We do not know the length of intrcnt and intrnames at compile time, so
* calculate things at run time.
*/
static int
sysctl_intrnames(SYSCTL_HANDLER_ARGS)
{
return (sysctl_handle_opaque(oidp, intrnames, eintrnames - intrnames,
req));
}
SYSCTL_PROC(_hw, OID_AUTO, intrnames, CTLTYPE_OPAQUE | CTLFLAG_RD,
NULL, 0, sysctl_intrnames, "", "Interrupt Names");
static int
sysctl_intrcnt(SYSCTL_HANDLER_ARGS)
{
return (sysctl_handle_opaque(oidp, intrcnt,
(char *)eintrcnt - (char *)intrcnt, req));
}
SYSCTL_PROC(_hw, OID_AUTO, intrcnt, CTLTYPE_OPAQUE | CTLFLAG_RD,
NULL, 0, sysctl_intrcnt, "", "Interrupt Counts");