1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/sys/dev/usb/usbdevs_data.h

1232 lines
23 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/*
* THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT.
*
* generated from:
2000-01-13 20:17:11 +00:00
* FreeBSD: src/sys/dev/usb/usbdevs,v 1.8 2000/01/13 20:13:58 wpaul Exp
*/
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
struct usb_knowndev usb_knowndevs[] = {
{
USB_VENDOR_AOX, USB_PRODUCT_AOX_USB101,
0,
"Aox Inc.",
"USB ethernet controller engine",
},
{
USB_VENDOR_HP, USB_PRODUCT_HP_4100C,
0,
"Hewlett Packard",
"Scanjet 4100C",
},
{
USB_VENDOR_HP, USB_PRODUCT_HP_6300C,
0,
"Hewlett Packard",
"Scanjet 6300C",
},
{
USB_VENDOR_NEC, USB_PRODUCT_NEC_HUB,
0,
"NEC",
"hub",
},
{
USB_VENDOR_NEC, USB_PRODUCT_NEC_HUB_B,
0,
"NEC",
"hub",
},
{
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC260,
0,
1999-08-28 09:39:54 +00:00
"Eastman Kodak Corp.",
"Digital Science DC260",
},
{
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC240,
0,
"Eastman Kodak Corp.",
"Digital Science DC240",
},
{
USB_VENDOR_KODAK, USB_PRODUCT_KODAK_DC280,
0,
"Eastman Kodak Corp.",
"Digital Science DC280",
},
{
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX,
0,
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
"Melco Inc.",
"LU-ATX Ethernet adapter",
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
USB_VENDOR_CATC, USB_PRODUCT_CATC_ANDROMEDA,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
0,
"Computer Access Technology Corp.",
"Andromeda hub",
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE,
0,
"Computer Access Technology Corp.",
"Netmate ethernet adapter",
},
{
USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2,
0,
"Computer Access Technology Corp.",
"Netmate2 ethernet adapter",
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_CATC, USB_PRODUCT_CATC_CHIEF,
0,
"Computer Access Technology Corp.",
"USB Chief Bus & Protocol Analyzer",
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_GRAVIS, USB_PRODUCT_GRAVIS_GAMEPADPRO,
0,
1999-08-28 09:39:54 +00:00
"Advanced Gravis Computer Tech. Ltd.",
"GamePad Pro",
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_SUN, USB_PRODUCT_SUN_KEYBOARD,
0,
"Sun Microsystems",
"Type 6 USB",
},
{
USB_VENDOR_LEXMARK, USB_PRODUCT_LEXMARK_S2450,
0,
"Lexmark International Inc.",
"Optra S 2450",
},
{
USB_VENDOR_THRUST, USB_PRODUCT_THRUST_FUSION_PAD,
0,
"Thrustmaster",
"Fusion Digital Gamepad",
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_TI, USB_PRODUCT_TI_UTUSB41,
0,
"Texas Instruments",
"UT-USB41 hub",
},
{
USB_VENDOR_KYE, USB_PRODUCT_KYE_NICHE,
0,
1999-08-28 09:39:54 +00:00
"KYE Systems Corp.",
"Niche mouse",
},
{
USB_VENDOR_KYE, USB_PRODUCT_KYE_FLIGHT2000,
0,
1999-08-28 09:39:54 +00:00
"KYE Systems Corp.",
"Flight 2000 joystick",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_INTELLIMOUSE,
0,
"Microsoft",
"IntelliMouse",
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_NATURALKBD,
0,
"Microsoft",
"Natural Keyboard Elite",
},
{
USB_VENDOR_MICROSOFT, USB_PRODUCT_MICROSOFT_DDS80,
0,
"Microsoft",
1999-08-28 09:39:54 +00:00
"Digital Sound System 80",
},
{
USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_COMFORT,
1999-08-28 09:39:54 +00:00
0,
"Primax Electronics",
"Comfort",
},
{
USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_MOUSEINABOX,
0,
1999-08-28 09:39:54 +00:00
"Primax Electronics",
"Mouse-in-a-Box",
},
{
USB_VENDOR_CHERRY, USB_PRODUCT_CHERRY_MY3000KBD,
0,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
"My3000 keyboard",
},
{
USB_VENDOR_CHERRY, USB_PRODUCT_CHERRY_MY3000HUB,
0,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
"My3000 hub",
},
{
USB_VENDOR_BTC, USB_PRODUCT_BTC_BTC7932,
0,
1999-08-28 09:39:54 +00:00
"Behavior Tech. Computer",
"Keyboard with mouse port",
},
{
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS350,
0,
"Philips",
"DSS 350 Digital Speaker System",
},
{
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS,
0,
"Philips",
"DSS XXX Digital Speaker System",
},
{
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_HUB,
0,
"Philips",
"hub",
},
{
USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_DSS150,
0,
"Philips",
"DSS XXX Digital Speaker System",
},
{
USB_VENDOR_CONNECTIX, USB_PRODUCT_CONNECTIX_QUICKCAM,
0,
1999-08-28 09:39:54 +00:00
"Connectix Corp.",
"QuickCam",
},
{
USB_VENDOR_LUCENT, USB_PRODUCT_LUCENT_EVALKIT,
0,
"Lucent",
"USS-720 evaluation kit",
},
{
USB_VENDOR_STMICRO, USB_PRODUCT_STMICRO_COMMUNICATOR,
0,
"STMicroelectronics",
"USB Communicator",
},
{
USB_VENDOR_ACER, USB_PRODUCT_ACER_ACERSCAN_C310U,
0,
1999-08-28 09:39:54 +00:00
"Acer Peripheral Inc.",
"Acerscan C310U",
},
{
USB_VENDOR_CANON, USB_PRODUCT_CANON_S10,
0,
"Canon Inc.",
"PowerShot S10",
},
{
USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_MOUSE,
0,
"Cypress Semiconductor",
"mouse",
},
{
USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_THERMO,
0,
"Cypress Semiconductor",
"thermometer",
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_EPSON, USB_PRODUCT_EPSON_PRINTER2,
0,
"Seiko Epson Corp.",
"ISD USB Smart Cable for Mac",
},
{
USB_VENDOR_EPSON, USB_PRODUCT_EPSON_PRINTER3,
0,
1999-08-28 09:39:54 +00:00
"Seiko Epson Corp.",
"ISD USB Smart Cable",
},
{
USB_VENDOR_3COMUSR, USB_PRODUCT_3COMUSR_USR56K,
0,
1999-08-28 09:39:54 +00:00
"U.S. Robotics",
"U.S.Robotics 56000 Voice Faxmodem Pro",
},
{
USB_VENDOR_KONICA, USB_PRODUCT_KONICA_CAMERA,
0,
1999-08-28 09:39:54 +00:00
"Konica Corp.",
"Digital Color Camera",
},
{
USB_VENDOR_ALTEC, USB_PRODUCT_ALTEC_ASC495,
0,
"Altec Lansing",
"ASC495 Speakers",
},
{
USB_VENDOR_SHUTTLE, USB_PRODUCT_SHUTTLE_EUSB,
0,
"Shuttle Technology",
"E-USB Bridge",
},
{
USB_VENDOR_CHICONY, USB_PRODUCT_CHICONY_KB8933,
0,
"Chicony Electronics Co., Ltd.",
"KB-8933 keyboard",
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_BROTHER, USB_PRODUCT_BROTHER_HL1050,
0,
"Brother Industries Corp.",
"HL-1050 laser printer",
},
{
USB_VENDOR_DALLAS, USB_PRODUCT_DALLAS_J6502,
0,
1999-08-28 09:39:54 +00:00
"Dallas Semiconductor",
"J-6502 speakers",
},
{
USB_VENDOR_3COM, USB_PRODUCT_3COM_3C19250,
0,
"3Com Corp.",
"3C19250 Ethernet adapter",
},
{
USB_VENDOR_KAWATSU, USB_PRODUCT_KAWATSU_MH4000P,
0,
"Kawatsu Semiconductor, Inc.",
"MiniHub 4000P",
},
{
USB_VENDOR_APC, USB_PRODUCT_APC_UPSPRO500,
0,
"American Power Conversion",
"Back-UPS Pro 500",
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_NETCHIP, USB_PRODUCT_NETCHIP_TURBOCONNECT,
0,
"NetChip Technology",
"Turbo-Connect",
},
{
USB_VENDOR_AKS, USB_PRODUCT_AKS_USBHASP,
0,
1999-08-28 09:39:54 +00:00
"Fast Security AG",
"USB-HASP 0.06",
},
{
USB_VENDOR_UNIACCESS, USB_PRODUCT_UNIACCESS_PANACHE,
0,
"Universal Access",
"Panache Surf USB ISDN Adapter",
},
{
USB_VENDOR_ANCHOR, USB_PRODUCT_ANCHOR_EZUSB,
0,
"Anchor Chips Inc.",
"EZUSB",
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_VISION, USB_PRODUCT_VISION_VC6452V002,
0,
"VLSI Vision Ltd.",
"VC6452V002 Camera",
},
{
USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC1284,
0,
1999-08-28 09:39:54 +00:00
"ATEN International Corp. Ltd.",
"Parallel printer adapter",
},
{
USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC10T,
0,
"ATEN International Corp. Ltd.",
"10Mbps ethernet adapter",
},
{
USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_MDC800,
0,
"Mustek Systems Inc.",
"MDC-800 digital camera",
},
{
USB_VENDOR_TELEX, USB_PRODUCT_TELEX_MIC1,
0,
"Telex Communications Inc.",
"Enhanced USB Microphone",
},
{
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_SERIAL1,
0,
1999-08-28 09:39:54 +00:00
"Peracom Networks Inc.",
"Serial Converter",
},
{
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET,
0,
"Peracom Networks Inc.",
"Ethernet adapter",
},
{
USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET2,
0,
"Peracom Networks Inc.",
"Ethernet adapter",
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_WACOM, USB_PRODUCT_WACOM_CT0405U,
0,
"WACOM Corp. Ltd.",
"CT-0405-U Tablet",
},
{
USB_VENDOR_ETEK, USB_PRODUCT_ETEK_1COM,
0,
"e-TEK Labs",
"Serial port",
},
{
USB_VENDOR_EIZO, USB_PRODUCT_EIZO_HUB,
0,
"EIZO",
"hub",
},
{
USB_VENDOR_EIZO, USB_PRODUCT_EIZO_MONITOR,
0,
"EIZO",
"monitor",
},
{
USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_MOUSE29UO,
0,
1999-08-28 09:39:54 +00:00
"Elecom Corp. Ltd.",
"mouse 29UO",
},
{
USB_VENDOR_ROCKFIRE, USB_PRODUCT_ROCKFIRE_GAMEPAD,
0,
"Rockfire",
"gamepad 203USB",
},
{
USB_VENDOR_IOMEGA, USB_PRODUCT_IOMEGA_ZIP100,
0,
1999-08-28 09:39:54 +00:00
"Iomega Corp.",
"Zip 100",
},
1999-05-01 13:16:35 +00:00
{
USB_VENDOR_OMNIVISION, USB_PRODUCT_OMNIVISION_OV511,
0,
"OmniVision",
"OV511 Camera",
},
{
USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_F5U002,
0,
1999-08-28 09:39:54 +00:00
"In-System Design",
"Parallel printer adapter",
},
{
USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_ISD110,
0,
"In-System Design",
"IDE adapter",
},
{
USB_VENDOR_QTRONIX, USB_PRODUCT_QTRONIX_980N,
0,
"Qtronix Corp",
"Scorpion-980N keyboard",
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
USB_VENDOR_ELSA, USB_PRODUCT_ELSA_MODEM1,
0,
"ELSA Gmbh",
"ELSA Modem Board",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_M2452,
0,
1999-08-28 09:39:54 +00:00
"Logitech Inc.",
"M2452 keyboard",
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_M4848,
0,
1999-08-28 09:39:54 +00:00
"Logitech Inc.",
"M4848 mouse",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAM,
0,
"Logitech Inc.",
"QuickCam",
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO,
0,
"Logitech Inc.",
"QuickCam Pro",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_N48,
0,
"Logitech Inc.",
"N48 mouse",
},
{
USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_MBA47,
1999-08-28 09:39:54 +00:00
0,
"Logitech Inc.",
"M-BA47 mouse",
},
{
USB_VENDOR_PIENGINEERING, USB_PRODUCT_PIENGINEERING_PS2USB,
0,
"P.I. Engineering",
"PS2 to Mac USB Adapter",
},
{
USB_VENDOR_CHIC, USB_PRODUCT_CHIC_MOUSE1,
0,
"Chic Technology",
"mouse",
},
{
USB_VENDOR_MACALLY, USB_PRODUCT_MACALLY_MOUSE1,
0,
"Macally",
"mouse",
},
{
USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX,
0,
"LinkSys",
"10/100 ethernet adapter",
},
1999-06-27 22:28:02 +00:00
{
USB_VENDOR_MULTITECH, USB_PRODUCT_MULTITECH_ATLAS,
0,
"MultiTech",
"MT5634ZBA-USB modem",
},
{
USB_VENDOR_ADS, USB_PRODUCT_ADS_ENET,
0,
"ADS Technologies",
"Ethernet adapter",
},
{
USB_VENDOR_SMC, USB_PRODUCT_SMC_2102USB,
0,
"Standard Microsystems Corp",
"10Mbps ethernet adapter",
},
{
USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB,
0,
"Standard Microsystems Corp",
"10/100 ethernet adapter",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S,
0,
"Entrega",
"1S serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_2S,
0,
"Entrega",
"2S serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S25,
0,
"Entrega",
"1S25 serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_4S,
0,
"Entrega",
"4S serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_E45,
0,
"Entrega",
"E45 Ethernet adapter",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_CENTRONICS,
0,
"Entrega",
"Centronics connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_1S9,
0,
"Entrega",
"1S9 serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_EZUSB,
0,
"Entrega",
"EZ-USB",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_SERIAL,
0,
"Entrega",
"DB25 Serial connector",
},
{
USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_SERIAL_DB9,
0,
"Entrega",
"DB9 Serial connector",
},
{
USB_VENDOR_MIDIMAN, USB_PRODUCT_MIDIMAN_MIDISPORT2X2,
0,
"Midiman",
"Midisport 2x2",
},
{
USB_VENDOR_SANDISK, USB_PRODUCT_SANDISK_IMAGEMATE,
0,
"SanDisk Corp",
"USB ImageMate",
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS,
0,
"ADMtek Inc.",
"AN986 USB Ethernet adapter",
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_COREGA, USB_PRODUCT_COREGA_USB_T,
0,
"Corega",
"USB ethernet adapter",
},
{
USB_VENDOR_SIIG, USB_PRODUCT_SIIG_DIGIFILMREADER,
0,
"SIIG",
"DigiFilm-Combo Reader",
},
{
USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_VISOR,
0,
"Handspring Inc.",
"Handspring Visor",
},
{
USB_VENDOR_ACTIVEWIRE, USB_PRODUCT_ACTIVEWIRE_IOBOARD,
0,
"ActiveWire Inc.",
"I/O Board",
},
{
USB_VENDOR_ACTIVEWIRE, USB_PRODUCT_ACTIVEWIRE_IOBOARD_FW1,
0,
"ActiveWire Inc.",
"I/O Board, rev. 1 firmware",
},
{
USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101,
0,
"BayNETGEAR Inc.",
"Ethernet adapter",
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100,
0,
"Billionton Systems",
"USB100 Ethernet adapter",
},
{
USB_VENDOR_MOTOROLA, USB_PRODUCT_MOTOROLA_MC141555,
0,
"Motorola",
"MC141555 hub controller",
},
{
USB_VENDOR_PLX, USB_PRODUCT_PLX_TESTBOARD,
0,
"PLX",
"test board",
},
{
USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_EDGEPORT4,
0,
"Inside Out Networks",
"EdgePort/4 serial ports",
},
{
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650C,
0,
"D-Link Corp",
"10Mbps ethernet adapter",
},
{
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX,
0,
"D-Link Corp",
"10/100 ethernet adapter",
},
{
USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX_PNA,
0,
"D-Link Corp",
"1/10/100 ethernet adapter",
},
{
USB_VENDOR_INTEL, USB_PRODUCT_INTEL_TESTBOARD,
0,
"Intel",
"82930 test board",
},
{
USB_VENDOR_AOX, 0,
USB_KNOWNDEV_NOPROD,
"Aox Inc.",
NULL,
},
{
USB_VENDOR_HP, 0,
USB_KNOWNDEV_NOPROD,
"Hewlett Packard",
NULL,
},
{
USB_VENDOR_NEC, 0,
USB_KNOWNDEV_NOPROD,
"NEC",
NULL,
},
{
USB_VENDOR_KODAK, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Eastman Kodak Corp.",
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_MELCO, 0,
USB_KNOWNDEV_NOPROD,
"Melco Inc.",
NULL,
},
{
USB_VENDOR_CATC, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Computer Access Technology Corp.",
NULL,
},
{
USB_VENDOR_GRAVIS, 0,
USB_KNOWNDEV_NOPROD,
"Advanced Gravis Computer Tech. Ltd.",
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_SUN, 0,
USB_KNOWNDEV_NOPROD,
"Sun Microsystems",
NULL,
},
{
USB_VENDOR_LEXMARK, 0,
USB_KNOWNDEV_NOPROD,
"Lexmark International Inc.",
NULL,
},
{
USB_VENDOR_NANAO, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"NANAO Corp.",
NULL,
},
{
USB_VENDOR_THRUST, 0,
USB_KNOWNDEV_NOPROD,
"Thrustmaster",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_TI, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Texas Instruments",
NULL,
},
{
USB_VENDOR_KYE, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"KYE Systems Corp.",
NULL,
},
{
USB_VENDOR_MICROSOFT, 0,
USB_KNOWNDEV_NOPROD,
"Microsoft",
NULL,
},
{
USB_VENDOR_PRIMAX, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Primax Electronics",
NULL,
},
{
USB_VENDOR_CHERRY, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Cherry Mikroschalter GmbH",
NULL,
},
{
USB_VENDOR_LOGITECH, 0,
USB_KNOWNDEV_NOPROD,
"Logitech Inc.",
NULL,
},
{
USB_VENDOR_BTC, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Behavior Tech. Computer",
NULL,
},
{
USB_VENDOR_PHILIPS, 0,
USB_KNOWNDEV_NOPROD,
"Philips",
NULL,
},
{
USB_VENDOR_CONNECTIX, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Connectix Corp.",
NULL,
},
{
USB_VENDOR_LUCENT, 0,
USB_KNOWNDEV_NOPROD,
"Lucent",
NULL,
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_STMICRO, 0,
USB_KNOWNDEV_NOPROD,
"STMicroelectronics",
NULL,
},
{
USB_VENDOR_ACER, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Acer Peripheral Inc.",
NULL,
},
{
USB_VENDOR_CANON, 0,
USB_KNOWNDEV_NOPROD,
"Canon Inc.",
NULL,
},
{
USB_VENDOR_CYPRESS, 0,
USB_KNOWNDEV_NOPROD,
"Cypress Semiconductor",
NULL,
},
{
USB_VENDOR_EPSON, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Seiko Epson Corp.",
NULL,
},
{
USB_VENDOR_3COMUSR, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"U.S. Robotics",
NULL,
},
{
USB_VENDOR_KONICA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Konica Corp.",
NULL,
},
{
USB_VENDOR_ALTEC, 0,
USB_KNOWNDEV_NOPROD,
"Altec Lansing",
NULL,
},
{
USB_VENDOR_SHUTTLE, 0,
USB_KNOWNDEV_NOPROD,
"Shuttle Technology",
NULL,
},
{
USB_VENDOR_CHICONY, 0,
USB_KNOWNDEV_NOPROD,
"Chicony Electronics Co., Ltd.",
NULL,
},
1999-08-28 09:39:54 +00:00
{
USB_VENDOR_BROTHER, 0,
USB_KNOWNDEV_NOPROD,
"Brother Industries Corp.",
NULL,
},
{
USB_VENDOR_DALLAS, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Dallas Semiconductor",
NULL,
},
{
USB_VENDOR_3COM, 0,
USB_KNOWNDEV_NOPROD,
"3Com Corp.",
NULL,
},
{
USB_VENDOR_BELKIN, 0,
USB_KNOWNDEV_NOPROD,
"Belkin Components",
NULL,
},
{
USB_VENDOR_KAWATSU, 0,
USB_KNOWNDEV_NOPROD,
"Kawatsu Semiconductor, Inc.",
NULL,
},
{
USB_VENDOR_APC, 0,
USB_KNOWNDEV_NOPROD,
"American Power Conversion",
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_NETCHIP, 0,
USB_KNOWNDEV_NOPROD,
"NetChip Technology",
NULL,
},
1999-03-31 23:53:48 +00:00
{
USB_VENDOR_AKS, 0,
1999-03-31 23:53:48 +00:00
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Fast Security AG",
1999-03-31 23:53:48 +00:00
NULL,
},
{
USB_VENDOR_UNIACCESS, 0,
USB_KNOWNDEV_NOPROD,
"Universal Access",
NULL,
},
{
USB_VENDOR_ANCHOR, 0,
USB_KNOWNDEV_NOPROD,
"Anchor Chips Inc.",
NULL,
},
{
USB_VENDOR_VISION, 0,
USB_KNOWNDEV_NOPROD,
"VLSI Vision Ltd.",
NULL,
},
{
USB_VENDOR_ATEN, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"ATEN International Corp. Ltd.",
NULL,
},
{
USB_VENDOR_MUSTEK, 0,
USB_KNOWNDEV_NOPROD,
"Mustek Systems Inc.",
NULL,
},
{
USB_VENDOR_TELEX, 0,
USB_KNOWNDEV_NOPROD,
"Telex Communications Inc.",
NULL,
},
{
USB_VENDOR_PERACOM, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Peracom Networks Inc.",
NULL,
},
{
USB_VENDOR_WACOM, 0,
USB_KNOWNDEV_NOPROD,
"WACOM Corp. Ltd.",
NULL,
},
{
USB_VENDOR_ETEK, 0,
USB_KNOWNDEV_NOPROD,
"e-TEK Labs",
NULL,
},
{
USB_VENDOR_EIZO, 0,
USB_KNOWNDEV_NOPROD,
"EIZO",
NULL,
},
{
USB_VENDOR_ELECOM, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Elecom Corp. Ltd.",
NULL,
},
{
USB_VENDOR_ROCKFIRE, 0,
USB_KNOWNDEV_NOPROD,
"Rockfire",
NULL,
},
{
USB_VENDOR_IOMEGA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Iomega Corp.",
NULL,
},
1999-05-01 13:16:35 +00:00
{
USB_VENDOR_OMNIVISION, 0,
USB_KNOWNDEV_NOPROD,
"OmniVision",
NULL,
},
{
USB_VENDOR_INSYSTEM, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"In-System Design",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_APPLE, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Apple Computer",
NULL,
},
{
USB_VENDOR_QTRONIX, 0,
USB_KNOWNDEV_NOPROD,
"Qtronix Corp",
NULL,
},
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
{
USB_VENDOR_ELSA, 0,
USB_KNOWNDEV_NOPROD,
"ELSA Gmbh",
NULL,
},
{
USB_VENDOR_EIZONANAO, 0,
USB_KNOWNDEV_NOPROD,
"EIZO Nanao",
NULL,
},
{
USB_VENDOR_KLSI, 0,
USB_KNOWNDEV_NOPROD,
"Kawasaki LSI",
NULL,
},
{
USB_VENDOR_PIENGINEERING, 0,
USB_KNOWNDEV_NOPROD,
"P.I. Engineering",
NULL,
},
{
USB_VENDOR_CHIC, 0,
USB_KNOWNDEV_NOPROD,
"Chic Technology",
NULL,
},
{
USB_VENDOR_MACALLY, 0,
USB_KNOWNDEV_NOPROD,
"Macally",
NULL,
},
{
USB_VENDOR_LINKSYS, 0,
USB_KNOWNDEV_NOPROD,
"LinkSys",
NULL,
},
1999-06-27 22:28:02 +00:00
{
USB_VENDOR_MULTITECH, 0,
USB_KNOWNDEV_NOPROD,
"MultiTech",
NULL,
},
{
USB_VENDOR_ADS, 0,
USB_KNOWNDEV_NOPROD,
"ADS Technologies",
NULL,
},
{
USB_VENDOR_SMC, 0,
USB_KNOWNDEV_NOPROD,
"Standard Microsystems Corp",
NULL,
},
{
USB_VENDOR_MIDIMAN, 0,
USB_KNOWNDEV_NOPROD,
"Midiman",
NULL,
},
{
USB_VENDOR_SANDISK, 0,
USB_KNOWNDEV_NOPROD,
"SanDisk Corp",
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_ADMTEK, 0,
USB_KNOWNDEV_NOPROD,
"ADMtek Inc.",
NULL,
},
2000-01-13 20:17:11 +00:00
{
USB_VENDOR_COREGA, 0,
USB_KNOWNDEV_NOPROD,
"Corega",
NULL,
},
{
USB_VENDOR_SIIG, 0,
USB_KNOWNDEV_NOPROD,
"SIIG",
NULL,
},
{
USB_VENDOR_HANDSPRING, 0,
USB_KNOWNDEV_NOPROD,
"Handspring Inc.",
NULL,
},
{
USB_VENDOR_ACTIVEWIRE, 0,
USB_KNOWNDEV_NOPROD,
"ActiveWire Inc.",
NULL,
},
{
USB_VENDOR_NETGEAR, 0,
USB_KNOWNDEV_NOPROD,
"BayNETGEAR Inc.",
NULL,
},
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
{
USB_VENDOR_BILLIONTON, 0,
USB_KNOWNDEV_NOPROD,
"Billionton Systems",
NULL,
},
{
USB_VENDOR_MOTOROLA, 0,
USB_KNOWNDEV_NOPROD,
"Motorola",
NULL,
},
{
USB_VENDOR_PLX, 0,
USB_KNOWNDEV_NOPROD,
"PLX",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_INSIDEOUT, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Inside Out Networks",
NULL,
},
{
1999-08-28 09:39:54 +00:00
USB_VENDOR_ENTREGA, 0,
USB_KNOWNDEV_NOPROD,
1999-08-28 09:39:54 +00:00
"Entrega",
NULL,
},
{
USB_VENDOR_DLINK, 0,
USB_KNOWNDEV_NOPROD,
"D-Link Corp",
NULL,
},
{
USB_VENDOR_INTEL, 0,
USB_KNOWNDEV_NOPROD,
"Intel",
NULL,
},
{ 0, 0, 0, NULL, NULL, }
};