mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Code Issues Releases Activity
e99eef3d4f
freebsd/lib/libarchive/archive_entry.3

214 lines
6.9 KiB
Groff
Raw Normal View History

Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.\" Copyright (c) 2003-2004 Tim Kientzle
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 15, 2003
.Dt archive_entry 3
.Os
.Sh NAME
.Nm archive_entry_clear
.Nm archive_entry_clone
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_copy_gname_w
.Nm archive_entry_copy_hardlink_w
.Nm archive_entry_copy_pathname_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_copy_stat
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_copy_symlink_w
.Nm archive_entry_copy_uname_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_free
.Nm archive_entry_gname
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_gname_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_hardlink
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_hardlink_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_new
.Nm archive_entry_pathname
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_pathname_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_set_devmajor
.Nm archive_entry_set_devminor
.Nm archive_entry_set_gid
.Nm archive_entry_set_gname
.Nm archive_entry_set_hardlink
.Nm archive_entry_set_mode
.Nm archive_entry_set_pathname
.Nm archive_entry_set_symlink
.Nm archive_entry_set_uid
.Nm archive_entry_set_uname
.Nm archive_entry_size
.Nm archive_entry_stat
.Nm archive_entry_symlink
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_symlink_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nm archive_entry_uname
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Nm archive_entry_uname_w
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Nd functions for manipulating archive entry descriptions
.Sh SYNOPSIS
.In archive_entry.h
.Ft void
.Fn archive_entry_clear "struct archive_entry *"
.Ft struct archive_entry *
.Fn archive_entry_clone "struct archive_entry *"
.Ft void
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Fn archive_entry_copy_gname_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_hardlink_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_pathname_w "struct archive_entry *" "const wchar_t *"
.Ft void
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Fn archive_entry_copy_stat "struct archive_entry *" "struct stat *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft void
.Fn archive_entry_copy_symlink_w "struct archive_entry *" "const wchar_t *"
.Ft void
.Fn archive_entry_copy_uname_w "struct archive_entry *" "const wchar_t *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Ft void
.Fn archive_entry_free "struct archive_entry *"
.Ft const char *
.Fn archive_entry_gname "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_gname_w "struct archive_entry *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Ft const char *
.Fn archive_entry_hardlink "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_hardlink_w "struct archive_entry *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Ft struct archive_entry *
.Fn archive_entry_new "void"
.Ft const char *
.Fn archive_entry_pathname "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_pathname_w "struct archive_entry *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Ft void
.Fn archive_entry_set_devmajor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_devminor "struct archive_entry *" "dev_t"
.Ft void
.Fn archive_entry_set_gid "struct archive_entry *" "gid_t"
.Ft void
.Fn archive_entry_set_gname "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_hardlink "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_mode "struct archive_entry *" "mode_t"
.Ft void
.Fn archive_entry_set_pathname "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_symlink "struct archive_entry *" "const char *"
.Ft void
.Fn archive_entry_set_uid "struct archive_entry *" "uid_t"
.Ft void
.Fn archive_entry_set_uname "struct archive_entry *" "const char *"
.Ft int64_t
.Fn archive_entry_size "struct archive_entry *"
.Ft const struct stat *
.Fn archive_entry_stat "struct archive_entry *"
.Ft const char *
.Fn archive_entry_symlink "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_symlink_w "struct archive_entry *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Ft const char *
.Fn archive_entry_uname "struct archive_entry *"
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Ft const wchar_t *
.Fn archive_entry_uname_w "struct archive_entry *"
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Sh DESCRIPTION
These functions create and manipulate data objects that
represent entries within an archive.
You can think of a
.Tn struct archive_entry
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
as a heavy-duty version of
.Tn struct stat :
it includes everything from
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Tn struct stat
plus associated pathname, textual group and user names, etc.
These objects are used by
.Xr libarchive 3
to represent the metadata associated with a particular
entry in an archive.
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.Pp
Most of the functions here set or read entries
in an object. Such functions have one of the
following forms:
.Bl -tag -compact -width indent
.It Fn archive_entry_set_XXXX
Stores the provided data in the object.
In particular, for strings, the pointer is stored,
not the referenced string.
.It Fn archive_entry_copy_XXXX
As above, except that the referenced data is copied
into the object.
.It Fn archive_entry_XXXX
Returns the specified data.
In the case of strings, a const-qualified pointer to
the string is returned.
.El
The string data can be accessed as wide character strings
(which are suffixed with
.Cm _w )
or normal
.Va char
strings.
Note that these are different representations of the same
data:
For example, if you store a narrow string and read the corresponding
wide string, the object will transparently convert formats
using the current locale.
Similarly, if you store a wide string and then store a
narrow string for the same data, the previously-set wide string will
be discarded in favor of the new data.
.Pp
The remaining functions allocate, destroy, clear, and copy
.Va archive_entry
objects.
These functions are described below:
Initial import of libarchive. What it is: A library for reading and writing various streaming archive formats, especially tar and cpio. Being a library, it should be easy to incorporate into pkg_* tools, sysinstall, and any other place that needs to read or write such archives. Features: * Full automatic detection of both compression and archive format. * Extensible internal architecture to make it easy to add new formats. * Support for "pax interchange format," a new POSIX-standard tar format that eliminates essentially all of the restrictions of historic formats. * BSD license Thanks to: jkh for pushing me to start this work, gordon for encouraging me to commit it, bde for answering endless style questions, and many others for feedback and encouragement. Status: Pretty good overall, though there are still a few rough edges and the library could always use more testing. Feedback eagerly solicited.
2004-02-09 23:22:54 +00:00
.Bl -tag -compact -width indent
.It Fn archive_entry_clear
Erases the object, resetting all internal fields to the
same state as a newly-created object.
This is provided to allow you to quickly recycle objects
without thrashing the heap.
.It Fn archive_entry_clone
A deep copy operation; all text fields are duplicated.
.It Fn archive_entry_free
Releases the
.Tn struct archive_entry
object.
.It Fn archive_entry_new
Allocate and return a blank
.Tn struct archive_entry
object.
.El
.\" .Sh EXAMPLE
.\" .Sh RETURN VALUES
.\" .Sh ERRORS
.Sh SEE ALSO
.Xr archive 3
.Sh HISTORY
The
.Nm libarchive
library first appeared in
.Fx 5.3 .
.Sh AUTHORS
.An -nosplit
The
.Nm libarchive
library was written by
.An Tim Kientzle Aq kientzle@acm.org .
Many fixes: * Disabled shared-library building, as some API breakage is still likely. (I didn't realize it was turned on by default.) If you have an existing /usr/lib/libarchive.so.2, I recommend deleting it. * Pax interchange format now correctly stores and reads UTF8 for extended attributes. In particular, pax format can portably handle arbitrarily long pathnames containing arbitrary characters. * Library compiles cleanly at -O2, -O3, and WARNS=6 on all FreeBSD-CURRENT platforms. * Minor portability improvements inspired by Juergen Lock and Greg Lewis. (Less reliance on stdint.h, isolating of various portability-challenged constructs.) * archive_entry transparently converts multi-byte <-> wide character strings, allowing clients and format handlers to deal with either one, as appropriate. * Support for reading 'L' and 'K' entries in standard tar archives for star compatibility. * Recognize (but don't yet handle) ACL entries from Solaris tar. * Pushed format-specific data for format readers down into format-specific storage and out of library-global storage. This should make it easier to maintain individual formats without mucking with the core library management. * Documentation updates to track the above changes. * Updates to tar.5 to correct a few mistakes and add some additional information about GNU tar and Solaris tar formats. Notes: * The basic 'tar' reader is getting more general; there's not much point in keeping the 'gnutar' reader separate. Merging the two would lose a bunch of duplicate code. * The libc ACL support is looking increasingly inadequate for my needs here. I might need to assemble some fairly significant code for parsing and building ACLs. <sigh>
2004-03-19 22:37:06 +00:00
.\" .Sh BUGS
Reference in New Issue Copy Permalink