mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
Code Issues Releases Activity
fc54707f7d
freebsd/bin/sh/trap.c

561 lines
11 KiB
C
Raw Normal View History

BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*-
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Kenneth Almquist.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
Add rcsid. Spelling.
1998-05-18 06:44:24 +00:00
#if 0
static char sccsid[] = "@(#)trap.c 8.5 (Berkeley) 6/5/95";
#endif
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
#endif /* not lint */
Consistently use FBSDID
2002-06-30 05:15:05 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
#include <signal.h>
#include <unistd.h>
#include <stdlib.h>
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
#include "shell.h"
#include "main.h"
#include "nodes.h" /* for other headers */
#include "eval.h"
#include "jobs.h"
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
#include "show.h"
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
#include "options.h"
#include "syntax.h"
#include "output.h"
#include "memalloc.h"
#include "error.h"
#include "trap.h"
#include "mystring.h"
sh: Fix duplicate prototypes for builtins. Have mkbuiltins write the prototypes for the *cmd functions to builtins.h instead of builtins.c and include builtins.h in more .c files instead of duplicating prototypes for *cmd functions in other headers.
2011-06-13 21:03:27 +00:00
#include "builtins.h"
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
#include "myhistedit.h"
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
* Sigmode records the current value of the signal handlers for the various
* modes. A value of zero means that the current handler is not known.
* S_HARD_IGN indicates that the signal was ignored on entry to the shell,
*/
#define S_DFL 1 /* default signal handling (SIG_DFL) */
#define S_CATCH 2 /* signal is caught */
#define S_IGN 3 /* signal is ignored (SIG_IGN) */
Various spelling/formatting changes. Submitted by: Philippe Charnier <charnier@xp11.frmug.org>
1999-05-08 10:22:15 +00:00
#define S_HARD_IGN 4 /* signal is ignored permanently */
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
#define S_RESET 5 /* temporary - to reset a hard ignored sig */
sh: Remove #define MKINIT. MKINIT only served for the removed mkinit. Many variables can be static now.
2013-07-25 19:48:15 +00:00
static char sigmode[NSIG]; /* current value of signal */
sh: If a SIGINT or SIGQUIT interrupts "wait", return status 128+sig.
2013-02-23 22:50:57 +00:00
volatile sig_atomic_t pendingsig; /* indicates some signal received */
sh: Fix race condition with signals and wait or set -T. The change in r238888 was incomplete. It was still possible for a trapped signal to arrive before the shell went to sleep (sigsuspend()) because a check was missing or because the signal arrived before in_waitcmd was set. On SMP, this bug sometimes caused the builtins/wait4.0 test to take 1 second to execute; it then might or might not fail. On UP, the test almost always failed.
2013-09-02 21:57:46 +00:00
volatile sig_atomic_t pendingsig_waitcmd; /* indicates SIGINT/SIGQUIT received */
Improve bookkeeping of in_waitcmd and style fixes. Submitted by: Bruce Evans
1998-08-25 09:33:34 +00:00
int in_dotrap; /* do we execute in a trap handler? */
If traps are set, they are now executed even when a signal-blocking foreground child is running. Formerly, traps were exceuted after the next child exit. The enables the user to put a breaking wrapper around a blocking application: (trap 'echo trap ; exit 1' 2; ./pestyblocker; echo -n) The "echo -n" after the child call is needed to prevent sh from optimizing the trap-executing shell away. I'm working on this.
1998-09-08 13:16:52 +00:00
static char *volatile trap[NSIG]; /* trap handler commands */
Whitespace nits.
2006-04-17 17:55:11 +00:00
static volatile sig_atomic_t gotsig[NSIG];
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
/* indicates specified signal received */
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
static int ignore_sigchld; /* Used while handling SIGCHLD traps. */
Avoid calling el_resize() from a signal handler, even though libedit itself does that if you set EL_SIGNAL. Instead, set a flag and check it before calling el_gets(). This is safer, but slower to respond to changes. Pointed out by: mp
2002-07-24 02:06:07 +00:00
volatile sig_atomic_t gotwinch;
sh: If exit is used without args from a trap action, exit on the signal. This is useful so that it is easier to exit on a signal than to reset the trap to default and resend the signal. It matches ksh93. POSIX says that 'exit' without args from a trap action uses the exit status from the last command before the trap, which is different from 'exit $?' and matches this if the previous command is assumed to have exited on the signal. If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default action for the signal is to ignore it, a normal _exit(2) is done with exit status 128+signal_number.
2011-01-16 13:56:41 +00:00
static int last_trapsig;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
sh: Make exit without parameters from EXIT trap POSIX-compliant. It should use the original exit status, just like falling off the end of the trap handler. Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
2011-01-08 23:08:13 +00:00
static int exiting; /* exitshell() has been called */
static int exiting_exitstatus; /* value passed to exitshell() */
In the spirit of r90111, depend on c89 and remove the "STATIC" macro and its usage.
2010-10-13 22:18:03 +00:00
static int getsigaction(int, sig_t *);
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
* Map a string to a signal number.
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
*
* Note: the signal number may exceed NSIG.
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
*/
In the spirit of r90111, depend on c89 and remove the "STATIC" macro and its usage.
2010-10-13 22:18:03 +00:00
static int
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
sigstring_to_signum(char *sig)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
{
if (is_number(sig)) {
int signo;
signo = atoi(sig);
return ((signo >= 0 && signo < NSIG) ? signo : (-1));
Make sys_signame upper case. This matches the constants from <signal.h> with 'SIG' removed, which POSIX requires kill and trap to accept and 'kill -l' to write. 'kill -l', 'trap', 'trap -l' output is now upper case. In Turkish locales, signal names with an upper case 'I' are now accepted, while signal names with a lower case 'i' are no longer accepted, and the output of 'killall -l' now contains proper capital 'I' without dot instead of a dotted capital 'I'.
2011-02-04 16:40:50 +00:00
} else if (strcasecmp(sig, "EXIT") == 0) {
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
return (0);
} else {
int n;
Make sys_signame upper case. This matches the constants from <signal.h> with 'SIG' removed, which POSIX requires kill and trap to accept and 'kill -l' to write. 'kill -l', 'trap', 'trap -l' output is now upper case. In Turkish locales, signal names with an upper case 'I' are now accepted, while signal names with a lower case 'i' are no longer accepted, and the output of 'killall -l' now contains proper capital 'I' without dot instead of a dotted capital 'I'.
2011-02-04 16:40:50 +00:00
if (strncasecmp(sig, "SIG", 3) == 0)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
sig += 3;
Use sys_nsig instead of NSIG for the length of the signal arrays. This is important if we add new signals later. From DragonflyBSD: jobs.c:1.4, trap.c:1.3. Obtained from: DragonflyBSD
2004-01-28 19:01:10 +00:00
for (n = 1; n < sys_nsig; n++)
style(9): wrap at 80 columns.
2004-02-12 05:05:56 +00:00
if (sys_signame[n] &&
strcasecmp(sys_signame[n], sig) == 0)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
return (n);
}
return (-1);
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
/*
* Print a list of valid signal names.
*/
In the spirit of r90111, depend on c89 and remove the "STATIC" macro and its usage.
2010-10-13 22:18:03 +00:00
static void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
printsignals(void)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
{
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
int n, outlen;
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
outlen = 0;
Use sys_nsig instead of NSIG for the length of the signal arrays. This is important if we add new signals later. From DragonflyBSD: jobs.c:1.4, trap.c:1.3. Obtained from: DragonflyBSD
2004-01-28 19:01:10 +00:00
for (n = 1; n < sys_nsig; n++) {
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
if (sys_signame[n]) {
out1fmt("%s", sys_signame[n]);
outlen += strlen(sys_signame[n]);
} else {
out1fmt("%d", n);
outlen += 3; /* good enough */
}
++outlen;
sh: Make 'trap -l' look like 'kill -l'.
2011-01-14 21:30:27 +00:00
if (outlen > 71 || n == sys_nsig - 1) {
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
out1str("\n");
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
outlen = 0;
} else {
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
out1c(' ');
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
}
}
/*
* The trap builtin.
*/
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
int
sh: Fix various compiler warnings. It now passes WARNS=7 with clang on i386. GCC 4.2.1 does not understand setjmp() properly so will always trigger -Wuninitialized. I will not add the volatile keywords to suppress this.
2013-04-01 17:18:22 +00:00
trapcmd(int argc __unused, char **argv)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
char *action;
int signo;
trap: do not consider a bad signal name a fatal error. POSIX explicitly prescribes this. Continue processing any other signals and return status 1.
2009-11-21 20:44:34 +00:00
int errors = 0;
sh: Fix some things about -- in trap: * Make 'trap --' do the same as 'trap' instead of nothing. * Make '--' stop option processing (note that '-' action is not an option). Side effect: The error message for an unknown option is different.
2011-01-15 21:09:00 +00:00
int i;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
sh: Fix some things about -- in trap: * Make 'trap --' do the same as 'trap' instead of nothing. * Make '--' stop option processing (note that '-' action is not an option). Side effect: The error message for an unknown option is different.
2011-01-15 21:09:00 +00:00
while ((i = nextopt("l")) != '\0') {
switch (i) {
case 'l':
printsignals();
return (0);
}
}
argv = argptr;
if (*argv == NULL) {
Use sys_nsig instead of NSIG for the length of the signal arrays. This is important if we add new signals later. From DragonflyBSD: jobs.c:1.4, trap.c:1.3. Obtained from: DragonflyBSD
2004-01-28 19:01:10 +00:00
for (signo = 0 ; signo < sys_nsig ; signo++) {
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
if (signo < NSIG && trap[signo] != NULL) {
Correctly quote the output when showing the installed trap actions. PR: 74043 Submitted by: Jilles Tjoelker
2005-12-08 20:08:36 +00:00
out1str("trap -- ");
out1qstr(trap[signo]);
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
if (signo == 0) {
Make sys_signame upper case. This matches the constants from <signal.h> with 'SIG' removed, which POSIX requires kill and trap to accept and 'kill -l' to write. 'kill -l', 'trap', 'trap -l' output is now upper case. In Turkish locales, signal names with an upper case 'I' are now accepted, while signal names with a lower case 'i' are no longer accepted, and the output of 'killall -l' now contains proper capital 'I' without dot instead of a dotted capital 'I'.
2011-02-04 16:40:50 +00:00
out1str(" EXIT\n");
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
} else if (sys_signame[signo]) {
Correctly quote the output when showing the installed trap actions. PR: 74043 Submitted by: Jilles Tjoelker
2005-12-08 20:08:36 +00:00
out1fmt(" %s\n", sys_signame[signo]);
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
} else {
Correctly quote the output when showing the installed trap actions. PR: 74043 Submitted by: Jilles Tjoelker
2005-12-08 20:08:36 +00:00
out1fmt(" %d\n", signo);
Handle proper formatting and a buffer overrun when running an old sh on a system that has sys_nsig > NSIG (i.e. when libc is upgraded.) Submitted by: Matt Dillon Reviewed by: bde
2004-02-12 05:03:37 +00:00
}
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
return 0;
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
action = NULL;
if (*argv && sigstring_to_signum(*argv) == -1) {
sh: Fix some things about -- in trap: * Make 'trap --' do the same as 'trap' instead of nothing. * Make '--' stop option processing (note that '-' action is not an option). Side effect: The error message for an unknown option is different.
2011-01-15 21:09:00 +00:00
if (strcmp(*argv, "-") == 0)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
argv++;
sh: Fix some things about -- in trap: * Make 'trap --' do the same as 'trap' instead of nothing. * Make '--' stop option processing (note that '-' action is not an option). Side effect: The error message for an unknown option is different.
2011-01-15 21:09:00 +00:00
else {
action = *argv;
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
argv++;
}
}
sh: Fix out of bounds array access when trap is used with an invalid signal. MFC after: 1 week
2012-01-14 21:54:12 +00:00
for (; *argv; argv++) {
trap: do not consider a bad signal name a fatal error. POSIX explicitly prescribes this. Continue processing any other signals and return status 1.
2009-11-21 20:44:34 +00:00
if ((signo = sigstring_to_signum(*argv)) == -1) {
sh: Add a function to print warnings (with command name and newline). This is like error() but without raising an exception. It is particularly useful as a replacement for the warnx macro in bltin/bltin.h.
2010-12-21 20:47:06 +00:00
warning("bad signal %s", *argv);
trap: do not consider a bad signal name a fatal error. POSIX explicitly prescribes this. Continue processing any other signals and return status 1.
2009-11-21 20:44:34 +00:00
errors = 1;
sh: Fix out of bounds array access when trap is used with an invalid signal. MFC after: 1 week
2012-01-14 21:54:12 +00:00
continue;
trap: do not consider a bad signal name a fatal error. POSIX explicitly prescribes this. Continue processing any other signals and return status 1.
2009-11-21 20:44:34 +00:00
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
INTOFF;
if (action)
action = savestr(action);
if (trap[signo])
ckfree(trap[signo]);
trap[signo] = action;
if (signo != 0)
setsignal(signo);
INTON;
}
trap: do not consider a bad signal name a fatal error. POSIX explicitly prescribes this. Continue processing any other signals and return status 1.
2009-11-21 20:44:34 +00:00
return errors;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
/*
* Clear traps on a fork.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
clear_traps(void)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
{
If traps are set, they are now executed even when a signal-blocking foreground child is running. Formerly, traps were exceuted after the next child exit. The enables the user to put a breaking wrapper around a blocking application: (trap 'echo trap ; exit 1' 2; ./pestyblocker; echo -n) The "echo -n" after the child call is needed to prevent sh from optimizing the trap-executing shell away. I'm working on this.
1998-09-08 13:16:52 +00:00
char *volatile *tp;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
for (tp = trap ; tp <= &trap[NSIG - 1] ; tp++) {
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
if (*tp && **tp) { /* trap not NULL or SIG_IGN */
INTOFF;
ckfree(*tp);
*tp = NULL;
if (tp != &trap[0])
setsignal(tp - trap);
INTON;
}
}
}
Don't skip forking for an external command if any traps are active. Example: sh -c '(trap "echo trapped" EXIT; sleep 3)' now correctly prints "trapped". With this check, it is no longer necessary to check for -T explicitly in that case. This is a useful bugfix by itself and also important because I plan to skip forking more often. PR: bin/113860 (part of) PR: bin/74404 (part of) Reviewed by: stefanf Approved by: ed (mentor)
2009-06-13 21:10:41 +00:00
/*
* Check if we have any traps enabled.
*/
int
have_traps(void)
{
char *volatile *tp;
for (tp = trap ; tp <= &trap[NSIG - 1] ; tp++) {
if (*tp && **tp) /* trap not NULL or SIG_IGN */
return 1;
}
return 0;
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
* Set the signal handler for the specified signal. The routine figures
* out what it should be set to.
*/
Fixed some type and value mismatches. setsignal() returned a bogusly cast value that was always ignored. Rev.1.9 of trap.c made this more bogus by returning a semantically different value after calling siginterrupt(). Avoid these problems by not returning a value.
1997-11-10 11:32:24 +00:00
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
setsignal(int signo)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
int action;
sh: Use sigaction instead of signal/siginterrupt combination.
2009-11-11 23:13:24 +00:00
sig_t sigact = SIG_DFL;
struct sigaction sa;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
char *t;
if ((t = trap[signo]) == NULL)
action = S_DFL;
else if (*t != '\0')
action = S_CATCH;
else
action = S_IGN;
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
if (action == S_DFL) {
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
switch (signo) {
case SIGINT:
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
action = S_CATCH;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
break;
case SIGQUIT:
#ifdef DEBUG
{
extern int debug;
if (debug)
break;
}
#endif
Re-enable killing childs with SIGQUIT. Spotted by Bruce Evans.
1998-08-25 08:49:47 +00:00
action = S_CATCH;
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
break;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
case SIGTERM:
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
if (rootshell && iflag)
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
action = S_IGN;
break;
#if JOBS
case SIGTSTP:
case SIGTTOU:
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
if (rootshell && mflag)
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
action = S_IGN;
break;
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
#endif
#ifndef NO_HISTORY
case SIGWINCH:
Avoid calling el_resize() from a signal handler, even though libedit itself does that if you set EL_SIGNAL. Instead, set a flag and check it before calling el_gets(). This is safer, but slower to respond to changes. Pointed out by: mp
2002-07-24 02:06:07 +00:00
if (rootshell && iflag)
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
action = S_CATCH;
break;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
#endif
}
}
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
t = &sigmode[signo];
Remove trailing whitespace. Reviewed by: phk
1995-05-30 00:07:29 +00:00
if (*t == 0) {
/*
* current setting unknown
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
*/
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
if (!getsigaction(signo, &sigact)) {
/*
* Pretend it worked; maybe we should give a warning
* here, but other shells don't. We don't alter
* sigmode, so that we retry every time.
*/
Fixed some type and value mismatches. setsignal() returned a bogusly cast value that was always ignored. Rev.1.9 of trap.c made this more bogus by returning a semantically different value after calling siginterrupt(). Avoid these problems by not returning a value.
1997-11-10 11:32:24 +00:00
return;
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
if (sigact == SIG_IGN) {
Remove trailing whitespace. Reviewed by: phk
1995-05-30 00:07:29 +00:00
if (mflag && (signo == SIGTSTP ||
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
signo == SIGTTIN || signo == SIGTTOU)) {
*t = S_IGN; /* don't hard ignore these */
} else
*t = S_HARD_IGN;
} else {
*t = S_RESET; /* force to be set */
}
}
if (*t == S_HARD_IGN || *t == action)
Fixed some type and value mismatches. setsignal() returned a bogusly cast value that was always ignored. Rev.1.9 of trap.c made this more bogus by returning a semantically different value after calling siginterrupt(). Avoid these problems by not returning a value.
1997-11-10 11:32:24 +00:00
return;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
switch (action) {
case S_DFL: sigact = SIG_DFL; break;
case S_CATCH: sigact = onsig; break;
case S_IGN: sigact = SIG_IGN; break;
}
*t = action;
sh: Use sigaction instead of signal/siginterrupt combination.
2009-11-11 23:13:24 +00:00
sa.sa_handler = sigact;
sa.sa_flags = 0;
sigemptyset(&sa.sa_mask);
sigaction(signo, &sa, NULL);
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
* Return the current setting for sig w/o changing it.
*/
In the spirit of r90111, depend on c89 and remove the "STATIC" macro and its usage.
2010-10-13 22:18:03 +00:00
static int
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
getsigaction(int signo, sig_t *sigact)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
struct sigaction sa;
if (sigaction(signo, (struct sigaction *)0, &sa) == -1)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
return 0;
*sigact = (sig_t) sa.sa_handler;
return 1;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
* Ignore a signal.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
ignoresig(int signo)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
sh: Allow trapping SIGINT/SIGQUIT after ignore because of '&'. If job control is not enabled, background jobs started with ... & ignore SIGINT and SIGQUIT so that they are not affected by such signals that are intended for the foreground job. However, this should not prevent reassigning a different action for these signals (as if the shell invocation inherited these signal actions from its parent). Austin group issue #751 Example: { trap - INT; exec sleep 10; } & wait A Ctrl+C should terminate the sleep command.
2013-10-30 21:36:15 +00:00
if (sigmode[signo] == 0)
setsignal(signo);
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
if (sigmode[signo] != S_IGN && sigmode[signo] != S_HARD_IGN) {
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
signal(signo, SIG_IGN);
sh: Allow trapping SIGINT/SIGQUIT after ignore because of '&'. If job control is not enabled, background jobs started with ... & ignore SIGINT and SIGQUIT so that they are not affected by such signals that are intended for the foreground job. However, this should not prevent reassigning a different action for these signals (as if the shell invocation inherited these signal actions from its parent). Austin group issue #751 Example: { trap - INT; exec sleep 10; } & wait A Ctrl+C should terminate the sleep command.
2013-10-30 21:36:15 +00:00
sigmode[signo] = S_IGN;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
}
sh: Fix EINTR race condition in "wait" and "set -T" using sigsuspend(). When waiting for child processes using "wait" or if "set -T" is in effect, a signal interrupts the wait. Make sure there is no window where the signal handler may be invoked (setting a flag) just before going to sleep. There is a similar race condition in the shell language, but scripts can avoid it by exiting from the trap handler or enforcing synchronization using a fifo. If SIGCHLD is not trapped, a signal handler must be installed for it. Only install this handler for the duration of the wait to avoid triggering unexpected [EINTR] errors elsewhere. Note that for some reason only SIGINT and SIGQUIT interrupt a "wait" command. This remains the case.
2012-07-29 18:04:38 +00:00
int
issigchldtrapped(void)
{
return (trap[SIGCHLD] != NULL && *trap[SIGCHLD] != '\0');
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
/*
* Signal handler.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
onsig(int signo)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
Fixed some type and value mismatches. setsignal() returned a bogusly cast value that was always ignored. Rev.1.9 of trap.c made this more bogus by returning a semantically different value after calling siginterrupt(). Avoid these problems by not returning a value.
1997-11-10 11:32:24 +00:00
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
if (signo == SIGINT && trap[SIGINT] == NULL) {
onint();
return;
}
If traps are set, they are now executed even when a signal-blocking foreground child is running. Formerly, traps were exceuted after the next child exit. The enables the user to put a breaking wrapper around a blocking application: (trap 'echo trap ; exit 1' 2; ./pestyblocker; echo -n) The "echo -n" after the child call is needed to prevent sh from optimizing the trap-executing shell away. I'm working on this.
1998-09-08 13:16:52 +00:00
/* If we are currently in a wait builtin, prepare to break it */
sh: Fix race condition with signals and wait or set -T. The change in r238888 was incomplete. It was still possible for a trapped signal to arrive before the shell went to sleep (sigsuspend()) because a check was missing or because the signal arrived before in_waitcmd was set. On SMP, this bug sometimes caused the builtins/wait4.0 test to take 1 second to execute; it then might or might not fail. On UP, the test almost always failed.
2013-09-02 21:57:46 +00:00
if (signo == SIGINT || signo == SIGQUIT)
pendingsig_waitcmd = signo;
sh: If a SIGINT or SIGQUIT interrupts "wait", return status 128+sig.
2013-02-23 22:50:57 +00:00
if (trap[signo] != NULL && trap[signo][0] != '\0' &&
(signo != SIGCHLD || !ignore_sigchld)) {
gotsig[signo] = 1;
pendingsig = signo;
}
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
#ifndef NO_HISTORY
if (signo == SIGWINCH)
Avoid calling el_resize() from a signal handler, even though libedit itself does that if you set EL_SIGNAL. Instead, set a flag and check it before calling el_gets(). This is safer, but slower to respond to changes. Pointed out by: mp
2002-07-24 02:06:07 +00:00
gotwinch = 1;
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
#endif
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
/*
* Called to execute a trap. Perhaps we should avoid entering new trap
* handlers while we are executing a trap handler.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
dotrap(void)
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
{
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
int i;
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
int savestatus, prev_evalskip, prev_skipcount;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
in_dotrap++;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
for (;;) {
sh: If a SIGINT or SIGQUIT interrupts "wait", return status 128+sig.
2013-02-23 22:50:57 +00:00
pendingsig = 0;
sh: Fix race condition with signals and wait or set -T. The change in r238888 was incomplete. It was still possible for a trapped signal to arrive before the shell went to sleep (sigsuspend()) because a check was missing or because the signal arrived before in_waitcmd was set. On SMP, this bug sometimes caused the builtins/wait4.0 test to take 1 second to execute; it then might or might not fail. On UP, the test almost always failed.
2013-09-02 21:57:46 +00:00
pendingsig_waitcmd = 0;
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
for (i = 1; i < NSIG; i++) {
if (gotsig[i]) {
gotsig[i] = 0;
if (trap[i]) {
/*
style(9): wrap at 80 columns.
2004-02-12 05:05:56 +00:00
* Ignore SIGCHLD to avoid infinite
* recursion if the trap action does
* a fork.
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
*/
if (i == SIGCHLD)
ignore_sigchld++;
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
/*
* Backup current evalskip
* state and reset it before
* executing a trap, so that the
* trap is not disturbed by an
* ongoing break/continue/return
* statement.
*/
prev_evalskip = evalskip;
prev_skipcount = skipcount;
evalskip = 0;
sh: If exit is used without args from a trap action, exit on the signal. This is useful so that it is easier to exit on a signal than to reset the trap to default and resend the signal. It matches ksh93. POSIX says that 'exit' without args from a trap action uses the exit status from the last command before the trap, which is different from 'exit $?' and matches this if the previous command is assumed to have exited on the signal. If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default action for the signal is to ignore it, a normal _exit(2) is done with exit status 128+signal_number.
2011-01-16 13:56:41 +00:00
last_trapsig = i;
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
savestatus = exitstatus;
Fix the eval command in combination with set -e. Before this change the shell would always terminate if eval returned with a non-zero exit status regardless if the status was actually tested. Unfortunately a new file-scope variable is needed, the alternative would only be to add a new parameter to all built-ins. PR: 134881
2009-05-31 12:36:14 +00:00
evalstring(trap[i], 0);
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
/*
* If such a command was not
* already in progress, allow a
* break/continue/return in the
* trap action to have an effect
* outside of it.
*/
sh: When executing a trap, keep exit status along with evalskip. This ensures 'return' in a trap returns the correct status to the caller. If evalskip is not set or if it is overridden by a previous evalskip, keep the old behaviour of restoring the exit status from before the trap.
2013-03-03 17:33:59 +00:00
if (evalskip == 0 ||
prev_evalskip != 0) {
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
evalskip = prev_evalskip;
skipcount = prev_skipcount;
sh: When executing a trap, keep exit status along with evalskip. This ensures 'return' in a trap returns the correct status to the caller. If evalskip is not set or if it is overridden by a previous evalskip, keep the old behaviour of restoring the exit status from before the trap.
2013-03-03 17:33:59 +00:00
exitstatus = savestatus;
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
if (i == SIGCHLD)
ignore_sigchld--;
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
break;
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
}
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
With these changes sh(1)'s trap command should be POSIX-compliant, while remaining (becoming :) compatible with other popular shells. Specifically these changes include: 1) Implement 'trap -l' to get a list of valid signals names. This is useful if you wanted to do something like reset all signal handlers to there defaults values, in which case something like this will do the trick. trap `trap -l` 2) Reformat the output of 'trap' so it can be saved and later eval'd to restore the saved settings. 3) Allow the use of signal names as well as signal numbers. 4) Fix trap handling of SIGCHLD so that commands like the following (albeit, contrived) won't cause sh(1) to recurse ad infinitum. trap uname 0 20 5) Make variables static that are used only in trap.c. 6) Minor 'style(9) police' mods.
1996-12-24 23:59:53 +00:00
if (i >= NSIG)
break;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
in_dotrap--;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
/*
* Controls whether the shell is interactive or not.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
setinteractive(int on)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
Do not exit on SIGINT in non-interactive shells, fixes PR 1206, i.e. this makes emacs usable from system(3). Programs called from shellscripts are now required to exit with proper signal status. That means, they have to kill themself. Exiting with faked numerical exit code is not sufficient. Exit with proper signal status if script exits on signal. Make the wait builtin interruptable, both with and without traps set. Use volatile sig_atomic_t where (and only where) appropriate. (Almost) fix printing of newlines on SIGINT. Make traps setable from trap handlers. This is needed for shellscripts that catch SIGINT for cleanup work but intend to exit on it, hance have to kill themself from a trap handler. I.e. mkdep. While I'm at it, make it -Wall clean. -Wall is not enabled in Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c are not -Wall-able. PR: 1206 Obtained from: Basic SIGINT fix from Bruce Evans
1998-08-24 10:20:37 +00:00
static int is_interactive = -1;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
if (on == is_interactive)
return;
setsignal(SIGINT);
setsignal(SIGQUIT);
setsignal(SIGTERM);
Catch SIGWINCH in interactive shells and call el_resize() to update libedit's idea of the window size.
2002-07-23 15:05:00 +00:00
#ifndef NO_HISTORY
setsignal(SIGWINCH);
#endif
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
is_interactive = on;
}
/*
* Called to exit the shell.
*/
void
o __P has been reoved o Old-style K&R declarations have been converted to new C89 style o register has been removed o prototype for main() has been removed (gcc3 makes it an error) o int main(int argc, char *argv[]) is the preferred main definition. o Attempt to not break style(9) conformance for declarations more than they already are. o Change int foo() { ... to int foo(void) { ...
2002-02-02 06:50:57 +00:00
exitshell(int status)
sh: Make exit without parameters from EXIT trap POSIX-compliant. It should use the original exit status, just like falling off the end of the trap handler. Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
2011-01-08 23:08:13 +00:00
{
TRACE(("exitshell(%d) pid=%d\n", status, getpid()));
exiting = 1;
exiting_exitstatus = status;
exitshell_savedstatus();
}
void
exitshell_savedstatus(void)
Merge of 4.4-Lite2 sh source, plus some gcc -Wall cleaning. This is a merge of parallel duplicate work by Steve Price and myself. :-] There are some changes to the build that are my fault... mkinit.c was trying (poorly) to duplicate some of the work that make(1) is designed to do. The Makefile hackery is my fault too, the depend list was incomplete because of some explicit OBJS+= entries, so mkdep wasn't picking up their source file #includes. This closes a pile of /bin/sh PR's, but not all of them.. Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
1996-09-01 10:22:36 +00:00
{
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
struct jmploc loc1, loc2;
char *p;
sh: If exit is used without args from a trap action, exit on the signal. This is useful so that it is easier to exit on a signal than to reset the trap to default and resend the signal. It matches ksh93. POSIX says that 'exit' without args from a trap action uses the exit status from the last command before the trap, which is different from 'exit $?' and matches this if the previous command is assumed to have exited on the signal. If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default action for the signal is to ignore it, a normal _exit(2) is done with exit status 128+signal_number.
2011-01-16 13:56:41 +00:00
int sig = 0;
sigset_t sigs;
if (!exiting) {
if (in_dotrap && last_trapsig) {
sig = last_trapsig;
exiting_exitstatus = sig + 128;
} else
exiting_exitstatus = oexitstatus;
}
sh: Make exit without parameters from EXIT trap POSIX-compliant. It should use the original exit status, just like falling off the end of the trap handler. Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
2011-01-08 23:08:13 +00:00
exitstatus = oexitstatus = exiting_exitstatus;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
if (setjmp(loc1.loc)) {
goto l1;
}
if (setjmp(loc2.loc)) {
goto l2;
}
handler = &loc1;
if ((p = trap[0]) != NULL && *p != '\0') {
sh: Fix execution of multiple statements in a trap when evalskip is set Before this fix, only the first statement of the trap was executed if evalskip was set. This is for example the case when: o "-e" is set for this shell o a trap is set on EXIT o a function returns 1 and causes the script to abort Reviewed by: jilles MFC after: 2 weeks
2012-01-16 11:07:46 +00:00
/*
* Reset evalskip, or the trap on EXIT could be
* interrupted if the last command was a "return".
*/
evalskip = 0;
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
trap[0] = NULL;
Fix the eval command in combination with set -e. Before this change the shell would always terminate if eval returned with a non-zero exit status regardless if the status was actually tested. Unfortunately a new file-scope variable is needed, the alternative would only be to add a new parameter to all built-ins. PR: 134881
2009-05-31 12:36:14 +00:00
evalstring(p, 0);
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
l1: handler = &loc2; /* probably unnecessary */
flushall();
#if JOBS
setjobctl(0);
#endif
sh: If exit is used without args from a trap action, exit on the signal. This is useful so that it is easier to exit on a signal than to reset the trap to default and resend the signal. It matches ksh93. POSIX says that 'exit' without args from a trap action uses the exit status from the last command before the trap, which is different from 'exit $?' and matches this if the previous command is assumed to have exited on the signal. If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default action for the signal is to ignore it, a normal _exit(2) is done with exit status 128+signal_number.
2011-01-16 13:56:41 +00:00
l2:
if (sig != 0 && sig != SIGSTOP && sig != SIGTSTP && sig != SIGTTIN &&
sig != SIGTTOU) {
signal(sig, SIG_DFL);
sigemptyset(&sigs);
sigaddset(&sigs, sig);
sigprocmask(SIG_UNBLOCK, &sigs, NULL);
kill(getpid(), sig);
/* If the default action is to ignore, fall back to _exit(). */
}
_exit(exiting_exitstatus);
BSD 4.4 Lite bin Sources
1994-05-26 06:18:55 +00:00
}
Reference in New Issue Copy Permalink