1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
freebsd/sys/dev/acpica/acpi_button.c

203 lines
5.8 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 Mitsaru IWASAKI <iwasaki@jp.freebsd.org>
* Copyright (c) 2000 Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include "acpi.h"
#include <dev/acpica/acpivar.h>
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
/*
* Hooks for the ACPI CA debugging infrastructure
*/
#define _COMPONENT ACPI_BUTTON
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
MODULE_NAME("BUTTON")
struct acpi_button_softc {
device_t button_dev;
ACPI_HANDLE button_handle;
#define ACPI_POWER_BUTTON 0
#define ACPI_SLEEP_BUTTON 1
boolean_t button_type; /* Power or Sleep Button */
};
static int acpi_button_probe(device_t dev);
static int acpi_button_attach(device_t dev);
static void acpi_button_notify_handler(ACPI_HANDLE h,UINT32 notify, void *context);
static void acpi_button_notify_pressed_for_sleep(void *arg);
static void acpi_button_notify_pressed_for_wakeup(void *arg);
static device_method_t acpi_button_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_button_probe),
DEVMETHOD(device_attach, acpi_button_attach),
{0, 0}
};
static driver_t acpi_button_driver = {
"acpi_button",
acpi_button_methods,
sizeof(struct acpi_button_softc),
};
devclass_t acpi_button_devclass;
DRIVER_MODULE(acpi_button, acpi, acpi_button_driver, acpi_button_devclass, 0, 0);
static int
acpi_button_probe(device_t dev)
{
struct acpi_button_softc *sc;
sc = device_get_softc(dev);
if (acpi_get_type(dev) == ACPI_TYPE_DEVICE) {
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
if (!acpi_disabled("button")) {
if (acpi_MatchHid(dev, "PNP0C0C")) {
device_set_desc(dev, "Power Button");
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
sc->button_type = ACPI_POWER_BUTTON;
return(0);
}
if (acpi_MatchHid(dev, "PNP0C0E")) {
device_set_desc(dev, "Sleep Button");
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
sc->button_type = ACPI_SLEEP_BUTTON;
return(0);
}
}
}
return(ENXIO);
}
static int
acpi_button_attach(device_t dev)
{
struct acpi_button_softc *sc;
ACPI_STATUS status;
FUNCTION_TRACE(__func__);
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
sc = device_get_softc(dev);
sc->button_dev = dev;
sc->button_handle = acpi_get_handle(dev);
if ((status = AcpiInstallNotifyHandler(sc->button_handle, ACPI_DEVICE_NOTIFY,
acpi_button_notify_handler, sc)) != AE_OK) {
device_printf(sc->button_dev, "couldn't install Notify handler - %s\n", AcpiFormatException(status));
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VALUE(ENXIO);
}
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VALUE(0);
}
static void
acpi_button_notify_pressed_for_sleep(void *arg)
{
struct acpi_button_softc *sc;
struct acpi_softc *acpi_sc;
FUNCTION_TRACE(__func__);
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
sc = (struct acpi_button_softc *)arg;
acpi_sc = acpi_device_get_parent_softc(sc->button_dev);
if (acpi_sc == NULL) {
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VOID;
}
switch (sc->button_type) {
case ACPI_POWER_BUTTON:
device_printf(sc->button_dev, "power button pressed\n", sc->button_type);
acpi_eventhandler_power_button_for_sleep((void *)acpi_sc);
break;
case ACPI_SLEEP_BUTTON:
device_printf(sc->button_dev, "sleep button pressed\n", sc->button_type);
acpi_eventhandler_sleep_button_for_sleep((void *)acpi_sc);
break;
default:
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
break; /* unknown button type */
}
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VOID;
}
static void
acpi_button_notify_pressed_for_wakeup(void *arg)
{
struct acpi_button_softc *sc;
struct acpi_softc *acpi_sc;
FUNCTION_TRACE(__func__);
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
sc = (struct acpi_button_softc *)arg;
acpi_sc = acpi_device_get_parent_softc(sc->button_dev);
if (acpi_sc == NULL) {
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VOID;
}
switch (sc->button_type) {
case ACPI_POWER_BUTTON:
device_printf(sc->button_dev, "wakeup by power button\n", sc->button_type);
acpi_eventhandler_power_button_for_wakeup((void *)acpi_sc);
break;
case ACPI_SLEEP_BUTTON:
device_printf(sc->button_dev, "wakeup by sleep button\n", sc->button_type);
acpi_eventhandler_sleep_button_for_wakeup((void *)acpi_sc);
break;
default:
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
break; /* unknown button type */
}
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VOID;
}
/* XXX maybe not here */
#define ACPI_NOTIFY_BUTTON_PRESSED_FOR_SLEEP 0x80
#define ACPI_NOTIFY_BUTTON_PRESSED_FOR_WAKEUP 0x02
static void
acpi_button_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
{
struct acpi_button_softc *sc = (struct acpi_button_softc *)context;
FUNCTION_TRACE_U32(__func__, notify);
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
switch (notify) {
case ACPI_NOTIFY_BUTTON_PRESSED_FOR_SLEEP:
AcpiOsQueueForExecution(OSD_PRIORITY_LO, acpi_button_notify_pressed_for_sleep, sc);
break;
case ACPI_NOTIFY_BUTTON_PRESSED_FOR_WAKEUP:
AcpiOsQueueForExecution(OSD_PRIORITY_LO, acpi_button_notify_pressed_for_wakeup, sc);
break;
default:
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
break; /* unknown notification value */
}
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later. - Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !. - Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace. - Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace. - Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
2000-12-08 09:16:20 +00:00
return_VOID;
}