mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
Sweep man pages replacing ad -> ada.
Approved by: re (blackend) MFC after: 1 week X-MFC note: stable/9 only
This commit is contained in:
Sergey Kandaurov
parent
620a44e54f
commit
05d98029e9
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=255977
@ -32,7 +32,7 @@
|
||||
.\" @(#)dd.1 8.2 (Berkeley) 1/13/94
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd January 23, 2009
|
||||
.Dd October 1, 2013
|
||||
.Dt DD 1
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -378,12 +378,12 @@ will exit.
|
||||
.Sh EXAMPLES
|
||||
Check that a disk drive contains no bad blocks:
|
||||
.Pp
|
||||
.Dl "dd if=/dev/ad0 of=/dev/null bs=1m"
|
||||
.Dl "dd if=/dev/ada0 of=/dev/null bs=1m"
|
||||
.Pp
|
||||
Do a refresh of a disk drive, in order to prevent presently
|
||||
recoverable read errors from progressing into unrecoverable read errors:
|
||||
.Pp
|
||||
.Dl "dd if=/dev/ad0 of=/dev/ad0 bs=1m"
|
||||
.Dl "dd if=/dev/ada0 of=/dev/ada0 bs=1m"
|
||||
.Pp
|
||||
Remove parity bit from a file:
|
||||
.Pp
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
.\" @(#)disklabel.8 8.2 (Berkeley) 4/19/94
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd March 5, 2011
|
||||
.Dd October 1, 2013
|
||||
.Dt BSDLABEL 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -457,9 +457,9 @@ such as
|
||||
and
|
||||
.Cm * ,
|
||||
which could be used as a source file for
|
||||
.Dq Li "bsdlabel -R ad0s1 new_label_file" :
|
||||
.Dq Li "bsdlabel -R ada0s1 new_label_file" :
|
||||
.Bd -literal -offset 4n
|
||||
# /dev/ad0s1:
|
||||
# /dev/ada0s1:
|
||||
|
||||
8 partitions:
|
||||
# size offset fstype [fsize bsize bps/cpg]
|
||||
|
||||
@ -28,7 +28,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd July 17, 1995
|
||||
.Dd October 1, 2013
|
||||
.Dt CCDCONFIG 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -180,7 +180,7 @@ and read it from
|
||||
mdadm --create --chunk=32 --level=0 --raid-devices=2 /dev/md0 \\
|
||||
/dev/hda1 /dev/hdb1
|
||||
# Make the RAID-0 just created available on FreeBSD:
|
||||
ccdconfig -c /dev/ccd0 32 linux /dev/ad0s1 /dev/ad0s2
|
||||
ccdconfig -c /dev/ccd0 32 linux /dev/ada0s1 /dev/ada0s2
|
||||
.Ed
|
||||
.Pp
|
||||
When you create a new ccd disk you generally want to
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd May 24, 2009
|
||||
.Dd October 1, 2013
|
||||
.Dt FDISK 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -159,7 +159,7 @@ mounted root device.
|
||||
When called with no arguments, it prints the sector 0 slice table.
|
||||
An example follows:
|
||||
.Bd -literal
|
||||
******* Working on device /dev/ad0 *******
|
||||
******* Working on device /dev/ada0 *******
|
||||
parameters extracted from in-core disklabel are:
|
||||
cylinders=769 heads=15 sectors/track=33 (495 blks/cyl)
|
||||
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd February 8, 2006
|
||||
.Dd October 1, 2013
|
||||
.Dt GBDE 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -207,23 +207,23 @@ used).
|
||||
.Sh EXAMPLES
|
||||
To initialize a device, using default parameters:
|
||||
.Pp
|
||||
.Dl "gbde init /dev/ad0s1f -L /etc/ad0s1f.lock"
|
||||
.Dl "gbde init /dev/ada0s1f -L /etc/ada0s1f.lock"
|
||||
.Pp
|
||||
To attach an encrypted device:
|
||||
.Pp
|
||||
.Dl "gbde attach ad0s1f -l /etc/ad0s1f.lock"
|
||||
.Dl "gbde attach ada0s1f -l /etc/ada0s1f.lock"
|
||||
.Pp
|
||||
The encrypted device has the suffix
|
||||
.Pa .bde
|
||||
so a typical
|
||||
command to create and mount a file system would be:
|
||||
.Pp
|
||||
.Dl "newfs /dev/ad0s1f.bde"
|
||||
.Dl "mount /dev/ad0s1f.bde /secret"
|
||||
.Dl "newfs /dev/ada0s1f.bde"
|
||||
.Dl "mount /dev/ada0s1f.bde /secret"
|
||||
.Pp
|
||||
To detach an encrypted device:
|
||||
.Pp
|
||||
.Dl "gbde detach ad0s1f"
|
||||
.Dl "gbde detach ada0s1f"
|
||||
.Pp
|
||||
Please notice that detaching an encrypted device corresponds to
|
||||
physically removing it, do not forget to unmount the file system first.
|
||||
@ -231,11 +231,11 @@ physically removing it, do not forget to unmount the file system first.
|
||||
To initialize the second key using a detached lockfile and a trivial
|
||||
pass-phrase:
|
||||
.Pp
|
||||
.Dl "gbde setkey ad0s1f -n 2 -P foo -L key2.lockfile"
|
||||
.Dl "gbde setkey ada0s1f -n 2 -P foo -L key2.lockfile"
|
||||
.Pp
|
||||
To destroy all copies of the masterkey:
|
||||
.Pp
|
||||
.Dl "gbde destroy ad0s1f -n -1"
|
||||
.Dl "gbde destroy ada0s1f -n -1"
|
||||
.Sh SEE ALSO
|
||||
.Xr gbde 4 ,
|
||||
.Xr geom 4
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd July 5, 2013
|
||||
.Dd October 1, 2013
|
||||
.Dt GELI 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -841,10 +841,10 @@ Create an encrypted provider for use by the user, but remember that users
|
||||
forget their passphrases, so backup the Master Key with your own random key:
|
||||
.Bd -literal -offset indent
|
||||
# dd if=/dev/random of=/mnt/pendrive/keys/`hostname` bs=64 count=1
|
||||
# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ad0s1e
|
||||
# geli backup /dev/ad0s1e /mnt/pendrive/backups/`hostname`
|
||||
# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ada0s1e
|
||||
# geli backup /dev/ada0s1e /mnt/pendrive/backups/`hostname`
|
||||
(use key number 0, so the encrypted Master Key will be re-encrypted by this)
|
||||
# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ad0s1e
|
||||
# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ada0s1e
|
||||
(allow the user to enter his passphrase)
|
||||
Enter new passphrase:
|
||||
Reenter new passphrase:
|
||||
@ -852,9 +852,9 @@ Reenter new passphrase:
|
||||
.Pp
|
||||
Encrypted swap partition setup:
|
||||
.Bd -literal -offset indent
|
||||
# dd if=/dev/random of=/dev/ad0s1b bs=1m
|
||||
# geli onetime -d -e 3des ad0s1b
|
||||
# swapon /dev/ad0s1b.eli
|
||||
# dd if=/dev/random of=/dev/ada0s1b bs=1m
|
||||
# geli onetime -d -e 3des ada0s1b
|
||||
# swapon /dev/ada0s1b.eli
|
||||
.Ed
|
||||
.Pp
|
||||
The example below shows how to configure two providers which will be attached
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd January 8, 2005
|
||||
.Dd October 1, 2013
|
||||
.Dt GSHSEC 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -108,7 +108,7 @@ Exit status is 0 on success, and 1 if the command fails.
|
||||
The following example shows how to create a shared secret device.
|
||||
The secret will be split between a slice on a local disk and a USB Pen drive.
|
||||
.Bd -literal -offset indent
|
||||
gshsec label -v secret /dev/ad0s1 /dev/da0
|
||||
gshsec label -v secret /dev/ada0s1 /dev/da0
|
||||
newfs /dev/shsec/secret
|
||||
.Ed
|
||||
.Pp
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd August 3, 2012
|
||||
.Dd October 1, 2013
|
||||
.Dt GVIRSTOR 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -161,7 +161,7 @@ size
|
||||
.Pq 4 MiB ,
|
||||
with two physical devices for backing storage.
|
||||
.Bd -literal -offset indent
|
||||
.No gvirstor label -v Ar mydata Ar /dev/ad4 Ar /dev/ad6
|
||||
.No gvirstor label -v Ar mydata Ar /dev/ada4 Ar /dev/ada6
|
||||
.No newfs Ar /dev/virstor/mydata
|
||||
.Ed
|
||||
.Pp
|
||||
@ -170,11 +170,11 @@ From now on, the virtual device will be available via the
|
||||
device entry.
|
||||
To add a new physical device / component to an active virstor device:
|
||||
.Bd -literal -offset indent
|
||||
.No gvirstor add Ar mydata Ar ad8
|
||||
.No gvirstor add Ar mydata Ar ada8
|
||||
.Ed
|
||||
.Pp
|
||||
This will add physical storage of
|
||||
.Ar ad8
|
||||
.Ar ada8
|
||||
to
|
||||
.Pa /dev/virstor/mydata
|
||||
device.
|
||||
|
||||
@ -28,7 +28,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd April 10, 2009
|
||||
.Dd October 1, 2013
|
||||
.Dt GVINUM 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -279,27 +279,27 @@ directory with device nodes for
|
||||
objects
|
||||
.El
|
||||
.Sh EXAMPLES
|
||||
To create a mirror on disks /dev/ad1 and /dev/ad2, create a filesystem, mount,
|
||||
unmount and then stop
|
||||
To create a mirror on disks /dev/ada1 and /dev/ada2, create a filesystem,
|
||||
mount, unmount and then stop
|
||||
.Ic gvinum :
|
||||
.Pp
|
||||
.Dl "gvinum mirror /dev/ad1 /dev/ad2"
|
||||
.Dl "gvinum mirror /dev/ada1 /dev/ada2"
|
||||
.Dl "newfs /dev/gvinum/gvinumvolume0"
|
||||
.Dl "mount /dev/gvinum/gvinumvolume0 /mnt"
|
||||
.Dl "..."
|
||||
.Dl "unmount /mnt"
|
||||
.Dl "gvinum stop"
|
||||
.Pp
|
||||
To create a striped mirror on disks /dev/ad1 /dev/ad2 /dev/ad3 and /dev/ad4
|
||||
named "data" and create a filesystem:
|
||||
To create a striped mirror on disks /dev/ada1 /dev/ada2 /dev/ada3 and
|
||||
/dev/ada4 named "data" and create a filesystem:
|
||||
.Pp
|
||||
.Dl "gvinum mirror -s -n data /dev/ad1 /dev/ad2 /dev/ad3 /dev/ad4"
|
||||
.Dl "gvinum mirror -s -n data /dev/ada1 /dev/ada2 /dev/ada3 /dev/ada4"
|
||||
.Dl "newfs /dev/gvinum/data"
|
||||
.Pp
|
||||
To create a raid5 array on disks /dev/ad1 /dev/ad2 and /dev/ad3, with stripesize
|
||||
493k you can use the raid5 command:
|
||||
To create a raid5 array on disks /dev/ada1 /dev/ada2 and /dev/ada3,
|
||||
with stripesize 493k you can use the raid5 command:
|
||||
.Pp
|
||||
.Dl "gvinum raid5 -s 493k /dev/ad1 /dev/ad2 /dev/ad3"
|
||||
.Dl "gvinum raid5 -s 493k /dev/ada1 /dev/ada2 /dev/ada3"
|
||||
.Pp
|
||||
Then the volume will be created automatically.
|
||||
Afterwards, you have to initialize the volume:
|
||||
@ -313,9 +313,9 @@ The list command will give you information about its progress.
|
||||
Imagine that one of the drives fails, and the output of 'printconfig' looks
|
||||
something like this:
|
||||
.Pp
|
||||
.Dl "drive gvinumdrive1 device /dev/ad2"
|
||||
.Dl "drive gvinumdrive1 device /dev/ada2"
|
||||
.Dl "drive gvinumdrive2 device /dev/???"
|
||||
.Dl "drive gvinumdrive0 device /dev/ad1"
|
||||
.Dl "drive gvinumdrive0 device /dev/ada1"
|
||||
.Dl "volume myraid5vol"
|
||||
.Dl "plex name myraid5vol.p0 org raid5 986s vol myraid5vol"
|
||||
.Dl "sd name myraid5vol.p0.s2 drive gvinumdrive2 len 32538s driveoffset 265s"
|
||||
@ -327,7 +327,7 @@ something like this:
|
||||
.Pp
|
||||
Create a new drive with this configuration:
|
||||
.Pp
|
||||
.Dl "drive gdrive4 device /dev/ad4"
|
||||
.Dl "drive gdrive4 device /dev/ada4"
|
||||
.Pp
|
||||
Then move the stale subdisk to the new drive:
|
||||
.Pp
|
||||
@ -344,7 +344,7 @@ might be delayed.
|
||||
Given the configuration as in the previous example, growing a RAID-5 or STRIPED
|
||||
array is accomplished by using the grow command:
|
||||
.Pp
|
||||
.Dl "gvinum grow myraid5vol.p0 /dev/ad4"
|
||||
.Dl "gvinum grow myraid5vol.p0 /dev/ada4"
|
||||
.Pp
|
||||
If everything went ok, the plex state should now be set to growable.
|
||||
You can then start the growing with the
|
||||
|
||||
@ -30,7 +30,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd December 23, 2008
|
||||
.Dd October 1, 2013
|
||||
.Dt MOUNT_MSDOSFS 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -182,14 +182,14 @@ Specify text file name with conversion table:
|
||||
.El
|
||||
.Sh EXAMPLES
|
||||
To mount a Russian MS-DOS file system located in
|
||||
.Pa /dev/ad1s1 :
|
||||
.Pa /dev/ada1s1 :
|
||||
.Pp
|
||||
.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ad1s1 /mnt"
|
||||
.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ada1s1 /mnt"
|
||||
.Pp
|
||||
To mount a Japanese MS-DOS file system located in
|
||||
.Pa /dev/ad1s1 :
|
||||
.Pa /dev/ada1s1 :
|
||||
.Pp
|
||||
.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ad1s1 /mnt"
|
||||
.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ada1s1 /mnt"
|
||||
.Sh SEE ALSO
|
||||
.Xr mount 2 ,
|
||||
.Xr unmount 2 ,
|
||||
|
||||
@ -28,7 +28,7 @@
|
||||
.\" @(#)newfs.8 8.6 (Berkeley) 5/3/95
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd June 22, 2011
|
||||
.Dd October 1, 2013
|
||||
.Dt NEWFS 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -285,10 +285,10 @@ to find the alternate superblocks if the standard superblock is lost.
|
||||
The size of a sector in bytes (almost never anything but 512).
|
||||
.El
|
||||
.Sh EXAMPLES
|
||||
.Dl newfs /dev/ad3s1a
|
||||
.Dl newfs /dev/ada3s1a
|
||||
.Pp
|
||||
Creates a new ufs file system on
|
||||
.Pa ad3s1a .
|
||||
.Pa ada3s1a .
|
||||
The
|
||||
.Nm
|
||||
utility will use a block size of 32768 bytes, a fragment size of 4096 bytes
|
||||
|
||||
@ -25,7 +25,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd July 25, 2010
|
||||
.Dd October 1, 2013
|
||||
.Dt NEWFS_MSDOS 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -209,9 +209,9 @@ The maximum file size is 4GB, even if the file system itself is bigger.
|
||||
Exit status is 0 on success and 1 on error.
|
||||
.Sh EXAMPLES
|
||||
Create a file system, using default parameters, on
|
||||
.Pa /dev/ad0s1 :
|
||||
.Pa /dev/ada0s1 :
|
||||
.Bd -literal -offset indent
|
||||
newfs_msdos /dev/ad0s1
|
||||
newfs_msdos /dev/ada0s1
|
||||
.Ed
|
||||
.Pp
|
||||
Create a standard 1.44M file system, with volume label
|
||||
|
||||
@ -25,7 +25,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd April 11, 2009
|
||||
.Dd October 1, 2013
|
||||
.Dt NEWFS_NANDFS 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -58,9 +58,9 @@ Percentage of reserved blocks (5 if not specified).
|
||||
Exit status is 0 on success and 1 on error.
|
||||
.Sh EXAMPLES
|
||||
Create a file system, using default parameters, on
|
||||
.Pa /dev/ad0s1 :
|
||||
.Pa /dev/ada0s1 :
|
||||
.Bd -literal -offset indent
|
||||
newfs_nandfs /dev/ad0s1
|
||||
newfs_nandfs /dev/ada0s1
|
||||
.Ed
|
||||
.Sh SEE ALSO
|
||||
.Xr disktab 5 ,
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd January 5, 2012
|
||||
.Dd October 1, 2013
|
||||
.Dt RECOVERDISK 1
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -104,11 +104,11 @@ Percent complete.
|
||||
.El
|
||||
.Sh EXAMPLES
|
||||
.Bd -literal
|
||||
# recover data from failing hard drive ad3
|
||||
recoverdisk /dev/ad3 /data/disk.img
|
||||
# recover data from failing hard drive ada3
|
||||
recoverdisk /dev/ada3 /data/disk.img
|
||||
|
||||
# clone a hard disk
|
||||
recoverdisk /dev/ad3 /dev/ad4
|
||||
recoverdisk /dev/ada3 /dev/ada4
|
||||
|
||||
# read an ISO image from a CD-ROM
|
||||
recoverdisk /dev/cd0 /data/cd.iso
|
||||
@ -120,7 +120,7 @@ recoverdisk -r worklist -w worklist /dev/cd0 /data/cd.iso
|
||||
recoverdisk /cdrom/file.avi file.avi
|
||||
|
||||
# If the disk hangs the system on read-errors try:
|
||||
recoverdisk -b 0 /dev/ad3 /somewhere
|
||||
recoverdisk -b 0 /dev/ada3 /somewhere
|
||||
|
||||
.Ed
|
||||
.Sh SEE ALSO
|
||||
|
||||
@ -25,7 +25,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd February 20, 2008
|
||||
.Dd October 1, 2013
|
||||
.Dt GEOM_LINUX_LVM 4
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -72,7 +72,7 @@ Providers:
|
||||
Sectorsize: 512
|
||||
Mode: r0w0e0
|
||||
Consumers:
|
||||
1. Name: ad0s1
|
||||
1. Name: ada0s1
|
||||
Mediasize: 80023716864 (75G)
|
||||
Sectorsize: 512
|
||||
Mode: r0w0e0
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd May 16, 2006
|
||||
.Dd October 1, 2013
|
||||
.Dt EXT2FS 5
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -53,9 +53,9 @@ file systems.
|
||||
To mount a
|
||||
.Nm
|
||||
volume located on
|
||||
.Pa /dev/ad1s1 :
|
||||
.Pa /dev/ada1s1 :
|
||||
.Pp
|
||||
.Dl "mount -t ext2fs /dev/ad1s1 /mnt"
|
||||
.Dl "mount -t ext2fs /dev/ada1s1 /mnt"
|
||||
.Sh SEE ALSO
|
||||
.Xr nmount 2 ,
|
||||
.Xr unmount 2 ,
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
.\" Written by Tom Rhodes
|
||||
.\" This file is in the public domain.
|
||||
.\"
|
||||
.Dd August 22, 2007
|
||||
.Dd October 1, 2013
|
||||
.Dt MSDOSFS 5
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -21,7 +21,7 @@ based file systems.
|
||||
.Pp
|
||||
The most common usage follows:
|
||||
.Pp
|
||||
.Dl "mount -t msdosfs /dev/ad0sN /mnt"
|
||||
.Dl "mount -t msdosfs /dev/ada0sN /mnt"
|
||||
.Pp
|
||||
where
|
||||
.Ar N
|
||||
@ -40,7 +40,7 @@ It is possible to define an entry in
|
||||
.Pa /etc/fstab
|
||||
that looks similar to:
|
||||
.Bd -literal
|
||||
/dev/ad0sN /dos msdosfs rw 0 0
|
||||
/dev/ada0sN /dos msdosfs rw 0 0
|
||||
.Ed
|
||||
.Pp
|
||||
This will mount an
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd July 23, 2011
|
||||
.Dd October 1, 2013
|
||||
.Dt REISERFS 5
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -53,9 +53,9 @@ file systems.
|
||||
To mount a
|
||||
.Nm
|
||||
volume located on
|
||||
.Pa /dev/ad1s1 :
|
||||
.Pa /dev/ada1s1 :
|
||||
.Pp
|
||||
.Dl "mount -t reiserfs /dev/ad1s1 /mnt"
|
||||
.Dl "mount -t reiserfs /dev/ada1s1 /mnt"
|
||||
.Sh SEE ALSO
|
||||
.Xr nmount 2 ,
|
||||
.Xr unmount 2 ,
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
.\" -*- nroff-fill -*-
|
||||
.\" $FreeBSD$
|
||||
.Dd June 25, 2009
|
||||
.Dd October 1, 2013
|
||||
.Dt PICOBSD 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -408,9 +408,9 @@ and the floppy is ready to boot.
|
||||
The same process can be used to store the image on a hard disk
|
||||
(entire volume or one of the slices):
|
||||
.Bd -literal -offset indent
|
||||
dd if=picobsd.bin of=/dev/ad2
|
||||
dd if=picobsd.bin of=/dev/ad2s3
|
||||
dd if=picobsd.bin of=/dev/ad2 oseek=NN
|
||||
dd if=picobsd.bin of=/dev/ada2
|
||||
dd if=picobsd.bin of=/dev/ada2s3
|
||||
dd if=picobsd.bin of=/dev/ada2 oseek=NN
|
||||
.Ed
|
||||
.Pp
|
||||
The first form will install the image on the entire disk, and it
|
||||
@ -435,8 +435,8 @@ You have to use the
|
||||
command to properly initialize the label (do not ask why!).
|
||||
One way to do this is
|
||||
.Bd -literal -offset indent
|
||||
disklabel -w ad0s2 auto
|
||||
disklabel -e ad0s2
|
||||
disklabel -w ada0s2 auto
|
||||
disklabel -e ada0s2
|
||||
.Ed
|
||||
.Pp
|
||||
and from the editor enter a line corresponding to the actual partition, e.g.\&
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd January 7, 2012
|
||||
.Dd October 1, 2013
|
||||
.Dt LOADER 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -972,7 +972,7 @@ autoboot 5
|
||||
.Pp
|
||||
Set the disk unit of the root device to 2, and then boot.
|
||||
This would be needed in a system with two IDE disks,
|
||||
with the second IDE disk hardwired to ad2 instead of ad1.
|
||||
with the second IDE disk hardwired to ada2 instead of ada1.
|
||||
.Bd -literal -offset indent
|
||||
set root_disk_unit=2
|
||||
boot /boot/kernel/kernel
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
.\"
|
||||
.\" $FreeBSD$
|
||||
.\"
|
||||
.Dd February 4, 2012
|
||||
.Dd October 1, 2013
|
||||
.Dt BOOT0CFG 8
|
||||
.Os
|
||||
.Sh NAME
|
||||
@ -173,17 +173,17 @@ Image for serial consoles (COM1,9600,8,N,1,MODEM)
|
||||
.Sh EXAMPLES
|
||||
To boot slice 2 on the next boot:
|
||||
.Pp
|
||||
.Dl "boot0cfg -s 2 ad0"
|
||||
.Dl "boot0cfg -s 2 ada0"
|
||||
.Pp
|
||||
To enable just slices 1 and 3 in the menu:
|
||||
.Pp
|
||||
.Dl "boot0cfg -m 0x5 ad0"
|
||||
.Dl "boot0cfg -m 0x5 ada0"
|
||||
.Pp
|
||||
To go back to non-interactive booting, use
|
||||
.Xr fdisk 8
|
||||
to install the default MBR:
|
||||
.Pp
|
||||
.Dl "fdisk -B ad0"
|
||||
.Dl "fdisk -B ada0"
|
||||
.Sh SEE ALSO
|
||||
.Xr geom 4 ,
|
||||
.Xr boot 8 ,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user