mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-18 10:35:55 +00:00
- Update spr.h
- Add hid.h Obtained from: NetBSD NOTE: This undoes some changes I'd made to prefix the processor name defines with PVR_. This was due to my original decision to use MPC750 as a cpu name. With this changed, the PVR_ change is no longer required.
This commit is contained in:
Benno Rice
parent
43e87179f8
commit
19ca68d921
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=110385
129
sys/powerpc/include/hid.h
Normal file
129
sys/powerpc/include/hid.h
Normal file
@ -0,0 +1,129 @@
|
||||
/*-
|
||||
* Copyright (c) 2000 Tsubai Masanari. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $NetBSD: hid.h,v 1.2 2001/08/22 21:05:25 matt Exp $
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
#ifndef _POWERPC_HID_H_
|
||||
#define _POWERPC_HID_H_
|
||||
|
||||
/* Hardware Implementation Dependent registers for the PowerPC */
|
||||
|
||||
#define HID0_EMCP 0x80000000 /* Enable MCP */
|
||||
#define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */
|
||||
#define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */
|
||||
#define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */
|
||||
#define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */
|
||||
#define HID0_EICE 0x04000000 /* Enable ICE output */
|
||||
#define HID0_TBEN 0x04000000 /* Time base enable (7450) */
|
||||
#define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */
|
||||
#define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */
|
||||
#define HID0_STEN 0x01000000 /* Software table search enable (7450) */
|
||||
#define HID0_DOZE 0x00800000 /* Enable doze mode */
|
||||
#define HID0_NAP 0x00400000 /* Enable nap mode */
|
||||
#define HID0_SLEEP 0x00200000 /* Enable sleep mode */
|
||||
#define HID0_DPM 0x00100000 /* Enable Dynamic power management */
|
||||
#define HID0_RISEG 0x00080000 /* Read I-SEG */
|
||||
#define HID0_BHTCLR 0x00080000 /* Clear branch history table (7450) */
|
||||
#define HID0_EIEC 0x00040000 /* Enable internal error checking */
|
||||
#define HID0_XAEN 0x00040000 /* Enable eXtended Addressing (7450) */
|
||||
#define HID0_NHR 0x00010000 /* Not hard reset */
|
||||
#define HID0_ICE 0x00008000 /* Enable i-cache */
|
||||
#define HID0_DCE 0x00004000 /* Enable d-cache */
|
||||
#define HID0_ILOCK 0x00002000 /* i-cache lock */
|
||||
#define HID0_DLOCK 0x00001000 /* d-cache lock */
|
||||
#define HID0_ICFI 0x00000800 /* i-cache flush invalidate */
|
||||
#define HID0_DCFI 0x00000400 /* d-cache flush invalidate */
|
||||
#define HID0_SPD 0x00000200 /* Disable speculative cache access */
|
||||
#define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */
|
||||
#define HID0_SGE 0x00000080 /* Enable store gathering */
|
||||
#define HID0_DCFA 0x00000040 /* Data cache flush assist */
|
||||
#define HID0_BTIC 0x00000020 /* Enable BTIC */
|
||||
#define HID0_ABE 0x00000008 /* Enable address broadcast */
|
||||
#define HID0_BHT 0x00000004 /* Enable branch history table */
|
||||
#define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */
|
||||
|
||||
#define HID0_BITMASK \
|
||||
"\20" \
|
||||
"\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \
|
||||
"\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \
|
||||
"\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \
|
||||
"\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI"
|
||||
|
||||
#define HID0_7450_BITMASK \
|
||||
"\20" \
|
||||
"\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \
|
||||
"\030b8\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \
|
||||
"\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011b23" \
|
||||
"\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI"
|
||||
|
||||
/*
|
||||
* HID0 bit definitions per cpu model
|
||||
*
|
||||
* bit 603 604 750 7400 7410 7450
|
||||
* 0 EMCP EMCP EMCP EMCP EMCP -
|
||||
* 1 - ECP DBP - - -
|
||||
* 2 EBA EBA EBA EBA EDA -
|
||||
* 3 EBD EBD EBD EBD EBD -
|
||||
* 4 SBCLK - BCLK BCKL BCLK -
|
||||
* 5 EICE - - - - TBEN
|
||||
* 6 ECLK - ECLK ECLK ECLK -
|
||||
* 7 PAR PAR PAR PAR PAR STEN
|
||||
* 8 DOZE - DOZE DOZE DOZE -
|
||||
* 9 NAP - NAP NAP NAP NAP
|
||||
* 10 SLEEP - SLEEP SLEEP SLEEP SLEEP
|
||||
* 11 DPM - DPM DPM DPM DPM
|
||||
* 12 RISEG - - RISEG - -
|
||||
* 13 - - - EIEC EIEC BHTCLR
|
||||
* 14 - - - - - XAEN
|
||||
* 15 - NHR NHR NHR NHR NHR
|
||||
* 16 ICE ICE ICE ICE ICE ICE
|
||||
* 17 DCE DCE DCE DCE DCE DCE
|
||||
* 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK
|
||||
* 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK
|
||||
* 20 ICFI ICFI ICFI ICFI ICFI ICFI
|
||||
* 21 DCFI DCFI DCFI DCFI DCFI DCFI
|
||||
* 22 - - SPD SPD SPG SPD
|
||||
* 23 - - IFEM IFTT IFTT -
|
||||
* 24 - SIE SGE SGE SGE SGE
|
||||
* 25 - - DCFA DCFA DCFA -
|
||||
* 26 - - BTIC BTIC BTIC BTIC
|
||||
* 27 FBIOB - - - - LRSTK
|
||||
* 28 - - ABE - - FOLD
|
||||
* 29 - BHT BHT BHT BHT BHT
|
||||
* 30 - - - NOPDST NOPDST NOPDST
|
||||
* 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI
|
||||
*
|
||||
* 604: ECP = Enable cache parity checking
|
||||
* 604: SIE = Serial instruction execution disable
|
||||
* 7450: TBEN = Time Base Enable
|
||||
* 7450: STEN = Software table lookup enable
|
||||
* 7450: BHTCLR = Branch history clear
|
||||
* 7450: LRSTK = Link Register Stack Enable
|
||||
* 7450: FOLD = Branch folding enable
|
||||
*/
|
||||
|
||||
#endif /* _POWERPC_HID_H_ */
|
||||
@ -30,6 +30,7 @@
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $NetBSD: spr.h,v 1.25 2002/08/14 15:38:40 matt Exp $
|
||||
* $FreeBSD$
|
||||
*/
|
||||
#ifndef _POWERPC_SPR_H_
|
||||
@ -39,7 +40,7 @@
|
||||
#define mtspr(reg, val) \
|
||||
__asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val))
|
||||
#define mfspr(reg) \
|
||||
( { u_int32_t val; \
|
||||
( { register_t val; \
|
||||
__asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \
|
||||
val; } )
|
||||
#endif /* _LOCORE */
|
||||
@ -74,7 +75,11 @@
|
||||
#define SPR_SDR1 0x019 /* .68 Page table base address register */
|
||||
#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */
|
||||
#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */
|
||||
#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */
|
||||
#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */
|
||||
#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */
|
||||
#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */
|
||||
#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
|
||||
#define SPR_SPRG0 0x110 /* 468 SPR General 0 */
|
||||
#define SPR_SPRG1 0x111 /* 468 SPR General 1 */
|
||||
#define SPR_SPRG2 0x112 /* 468 SPR General 2 */
|
||||
@ -83,59 +88,156 @@
|
||||
#define SPR_SPRG5 0x115 /* 4.. SPR General 5 */
|
||||
#define SPR_SPRG6 0x116 /* 4.. SPR General 6 */
|
||||
#define SPR_SPRG7 0x117 /* 4.. SPR General 7 */
|
||||
#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */
|
||||
#define SPR_EAR 0x11a /* .68 External Access Register */
|
||||
#define SPR_TBL 0x11c /* 468 Time Base Lower */
|
||||
#define SPR_TBU 0x11d /* 468 Time Base Upper */
|
||||
#define SPR_PVR 0x11f /* 468 Processor Version Register */
|
||||
#define PVR_MPC601 0x0001
|
||||
#define PVR_MPC603 0x0003
|
||||
#define PVR_MPC604 0x0004
|
||||
#define PVR_MPC602 0x0005
|
||||
#define PVR_MPC603e 0x0006
|
||||
#define PVR_MPC603ev 0x0007
|
||||
#define PVR_MPC750 0x0008
|
||||
#define PVR_MPC604ev 0x0009
|
||||
#define PVR_MPC7400 0x000c
|
||||
#define PVR_MPC620 0x0014
|
||||
#define PVR_MPC860 0x0050
|
||||
#define PVR_MPC8240 0x0081
|
||||
#define PVR_MPC7450 0x8000
|
||||
#define PVR_MPC7455 0x8001
|
||||
#define PVR_MPC7410 0x800c
|
||||
#define PVR_IBM405GP 0x4011
|
||||
#define PVR_IBM405L 0x4161
|
||||
#define MPC601 0x0001
|
||||
#define MPC603 0x0003
|
||||
#define MPC604 0x0004
|
||||
#define MPC602 0x0005
|
||||
#define MPC603e 0x0006
|
||||
#define MPC603ev 0x0007
|
||||
#define MPC750 0x0008
|
||||
#define MPC604ev 0x0009
|
||||
#define MPC7400 0x000c
|
||||
#define MPC620 0x0014
|
||||
#define IBM403 0x0020
|
||||
#define IBM401A1 0x0021
|
||||
#define IBM401B2 0x0022
|
||||
#define IBM401C2 0x0023
|
||||
#define IBM401D2 0x0024
|
||||
#define IBM401E2 0x0025
|
||||
#define IBM401F2 0x0026
|
||||
#define IBM401G2 0x0027
|
||||
#define IBMPOWER3 0x0041
|
||||
#define MPC860 0x0050
|
||||
#define MPC8240 0x0081
|
||||
#define IBM405GP 0x4011
|
||||
#define IBM405L 0x4161
|
||||
#define IBM750FX 0x7000
|
||||
#define MPC7450 0x8000
|
||||
#define MPC7455 0x8001
|
||||
#define MPC7410 0x800c
|
||||
#define MPC8245 0x8081
|
||||
|
||||
#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */
|
||||
#define SPR_IBAT0L 0x211 /* .68 Instruction BAT Reg 0 Lower */
|
||||
#define SPR_IBAT1U 0x212 /* .68 Instruction BAT Reg 1 Upper */
|
||||
#define SPR_IBAT1L 0x213 /* .68 Instruction BAT Reg 1 Lower */
|
||||
#define SPR_IBAT2U 0x214 /* .68 Instruction BAT Reg 2 Upper */
|
||||
#define SPR_IBAT2L 0x215 /* .68 Instruction BAT Reg 2 Lower */
|
||||
#define SPR_IBAT3U 0x216 /* .68 Instruction BAT Reg 3 Upper */
|
||||
#define SPR_IBAT3L 0x217 /* .68 Instruction BAT Reg 3 Lower */
|
||||
#define SPR_DBAT0U 0x218 /* .68 Data BAT Reg 0 Upper */
|
||||
#define SPR_DBAT0L 0x219 /* .68 Data BAT Reg 0 Lower */
|
||||
#define SPR_DBAT1U 0x21a /* .68 Data BAT Reg 1 Upper */
|
||||
#define SPR_DBAT1L 0x21b /* .68 Data BAT Reg 1 Lower */
|
||||
#define SPR_DBAT2U 0x21c /* .68 Data BAT Reg 2 Upper */
|
||||
#define SPR_DBAT2L 0x21d /* .68 Data BAT Reg 2 Lower */
|
||||
#define SPR_DBAT3U 0x21e /* .68 Data BAT Reg 3 Upper */
|
||||
#define SPR_DBAT3L 0x21f /* .68 Data BAT Reg 3 Lower */
|
||||
#define SPI_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */
|
||||
#define SPI_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */
|
||||
#define SPI_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */
|
||||
#define SPI_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */
|
||||
#define SPI_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */
|
||||
#define SPI_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */
|
||||
#define SPI_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */
|
||||
#define SPI_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */
|
||||
#define SPI_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */
|
||||
#define SPI_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */
|
||||
#define SPI_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */
|
||||
#define SPI_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */
|
||||
#define SPI_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */
|
||||
#define SPI_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */
|
||||
#define SPI_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */
|
||||
#define SPI_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */
|
||||
#define SPR_IBAT0U 0x210 /* .6. Instruction BAT Reg 0 Upper */
|
||||
#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */
|
||||
#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */
|
||||
#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */
|
||||
#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */
|
||||
#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */
|
||||
#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */
|
||||
#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */
|
||||
#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */
|
||||
#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */
|
||||
#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */
|
||||
#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */
|
||||
#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */
|
||||
#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */
|
||||
#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */
|
||||
#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */
|
||||
#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */
|
||||
#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */
|
||||
#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */
|
||||
#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */
|
||||
#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */
|
||||
#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */
|
||||
#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */
|
||||
#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */
|
||||
#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */
|
||||
#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */
|
||||
#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */
|
||||
#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */
|
||||
#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */
|
||||
#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */
|
||||
#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */
|
||||
#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */
|
||||
#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */
|
||||
#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */
|
||||
#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */
|
||||
#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */
|
||||
#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */
|
||||
#define SPR_DC_CST 0x230 /* ..8 Data Cache CSR */
|
||||
#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */
|
||||
#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */
|
||||
#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */
|
||||
#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */
|
||||
#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */
|
||||
#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */
|
||||
#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */
|
||||
#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */
|
||||
#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */
|
||||
#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */
|
||||
#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */
|
||||
#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */
|
||||
#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */
|
||||
#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */
|
||||
#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */
|
||||
#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */
|
||||
#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */
|
||||
#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */
|
||||
#define SPR_DC_ADR 0x231 /* ..8 Data Cache Address */
|
||||
#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */
|
||||
#define SPR_DC_DAT 0x232 /* ..8 Data Cache Data */
|
||||
#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */
|
||||
#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */
|
||||
#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */
|
||||
#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */
|
||||
#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */
|
||||
#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */
|
||||
#define SPR_MI_CTR 0x310 /* ..8 IMMU control */
|
||||
#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */
|
||||
#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */
|
||||
#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */
|
||||
#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */
|
||||
#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */
|
||||
#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */
|
||||
#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */
|
||||
#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */
|
||||
#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */
|
||||
#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */
|
||||
#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */
|
||||
#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */
|
||||
#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */
|
||||
#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */
|
||||
#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */
|
||||
#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */
|
||||
#define Mx_EPN_EV 0x00000020 /* Entry Valid */
|
||||
#define Mx_EPN_ASID 0x0000000f /* Address Space ID */
|
||||
#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */
|
||||
#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */
|
||||
#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */
|
||||
#define Mx_TWC_G 0x00000010 /* Guarded memory */
|
||||
#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */
|
||||
#define MD_TWC_WT 0x00000002 /* Write-Through */
|
||||
#define Mx_TWC_V 0x00000001 /* Entry Valid */
|
||||
#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */
|
||||
#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */
|
||||
#define Mx_RPN_PP 0x00000ff0 /* Page Protection */
|
||||
#define Mx_RPN_SPS 0x00000008 /* Small Page Size */
|
||||
#define Mx_RPN_SH 0x00000004 /* SHared page */
|
||||
#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */
|
||||
#define Mx_RPN_V 0x00000001 /* Valid */
|
||||
#define SPR_MD_CTR 0x318 /* ..8 DMMU control */
|
||||
#define SPR_M_CASID 0x319 /* ..8 CASID */
|
||||
#define M_CASID 0x0000000f /* Current AS Id */
|
||||
#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */
|
||||
#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */
|
||||
#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */
|
||||
#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */
|
||||
#define M_TWB_L1INDX 0x00000ffc /* level-1 index */
|
||||
#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */
|
||||
#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */
|
||||
#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */
|
||||
#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */
|
||||
#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */
|
||||
#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */
|
||||
#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */
|
||||
#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */
|
||||
#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */
|
||||
#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */
|
||||
#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */
|
||||
#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */
|
||||
@ -288,45 +390,60 @@
|
||||
#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */
|
||||
#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */
|
||||
#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */
|
||||
#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
|
||||
#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
|
||||
#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
|
||||
#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
|
||||
#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/
|
||||
#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
|
||||
#define MSSCR0_MBO 0x00400000 /* 9: must be one */
|
||||
#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
|
||||
#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
|
||||
#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */
|
||||
#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */
|
||||
#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */
|
||||
#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */
|
||||
#define L2CR_L2E 0x80000000 /* 0: L2 enable */
|
||||
#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
|
||||
#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
|
||||
#define L2SIZ_2M 0x00000000
|
||||
#define L2SIZ_256K 0x10000000
|
||||
#define L2SIZ_512K 0x20000000
|
||||
#define L2SIZ_1M 0x30000000
|
||||
#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
|
||||
#define L2CLK_DIS 0x00000000 /* disable L2 clock */
|
||||
#define L2CLK_10 0x02000000 /* core clock / 1 */
|
||||
#define L2CLK_15 0x04000000 /* / 1.5 */
|
||||
#define L2CLK_20 0x08000000 /* / 2 */
|
||||
#define L2CLK_25 0x0a000000 /* / 2.5 */
|
||||
#define L2CLK_30 0x0c000000 /* / 3 */
|
||||
#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
|
||||
#define L2RAM_FLOWTHRU_BURST 0x00000000
|
||||
#define L2RAM_PIPELINE_BURST 0x01000000
|
||||
#define L2RAM_PIPELINE_LATE 0x01800000
|
||||
#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
|
||||
#define L2CR_L2E 0x80000000 /* 0: L2 enable */
|
||||
#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
|
||||
#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
|
||||
#define L2SIZ_2M 0x00000000
|
||||
#define L2SIZ_256K 0x10000000
|
||||
#define L2SIZ_512K 0x20000000
|
||||
#define L2SIZ_1M 0x30000000
|
||||
#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
|
||||
#define L2CLK_DIS 0x00000000 /* disable L2 clock */
|
||||
#define L2CLK_10 0x02000000 /* core clock / 1 */
|
||||
#define L2CLK_15 0x04000000 /* / 1.5 */
|
||||
#define L2CLK_20 0x08000000 /* / 2 */
|
||||
#define L2CLK_25 0x0a000000 /* / 2.5 */
|
||||
#define L2CLK_30 0x0c000000 /* / 3 */
|
||||
#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
|
||||
#define L2RAM_FLOWTHRU_BURST 0x00000000
|
||||
#define L2RAM_PIPELINE_BURST 0x01000000
|
||||
#define L2RAM_PIPELINE_LATE 0x01800000
|
||||
#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
|
||||
Setting this bit disables instruction
|
||||
caching. */
|
||||
#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
|
||||
#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
|
||||
#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
|
||||
#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
|
||||
Enables automatic operation of the
|
||||
L2ZZ (low-power mode) signal. */
|
||||
#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
|
||||
#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
|
||||
#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
|
||||
#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
|
||||
#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
|
||||
#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
|
||||
#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
|
||||
#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
|
||||
#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
|
||||
#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
|
||||
#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
|
||||
#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
|
||||
#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
|
||||
#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
|
||||
#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
|
||||
#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
|
||||
#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
|
||||
#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
|
||||
#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
|
||||
/* progress (read only). */
|
||||
#define SPR_L3CR 0x3fa /* .6. L3 Control Register */
|
||||
#define L3CR_L3E 0x80000000 /* 0: L3 enable */
|
||||
#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
|
||||
#define L3CR_L3E 0x80000000 /* 0: L3 enable */
|
||||
#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
|
||||
#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */
|
||||
#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */
|
||||
#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user